-1.7.2p5 February 22, 2010 1
+1.7.4 July 21, 2010 1
User_List ::= User |
User ',' User_List
- User ::= '!'* username |
+ User ::= '!'* user name |
'!'* '#'uid |
'!'* '%'group |
'!'* '+'netgroup |
'!'* '%:'nonunix_group |
'!'* User_Alias
- A User_List is made up of one or more usernames, uids (prefixed with
+ A User_List is made up of one or more user names, uids (prefixed with
'#'), system groups (prefixed with '%'), netgroups (prefixed with '+')
and User_Aliases. Each list item may be prefixed with zero or more '!'
operators. An odd number of '!' operators negate the value of the
item; an even number just cancel each other out.
- A username, group, netgroup and nonunix_groups may be enclosed in
- double quotes to avoid the need for escaping special characters.
- Alternately, special characters may be specified in escaped hex mode,
- e.g. \x20 for space.
+ A user name, group, netgroup or nonunix_group may be enclosed in double
+ quotes to avoid the need for escaping special characters. Alternately,
+ special characters may be specified in escaped hex mode, e.g. \x20 for
+ space.
The nonunix_group syntax depends on the underlying implementation. For
instance, the QAS AD backend supports the following formats:
-1.7.2p5 February 22, 2010 2
+1.7.4 July 21, 2010 2
- Runas_Member ::= '!'* username |
+ Runas_Member ::= '!'* user name |
'!'* '#'uid |
'!'* '%'group |
'!'* +netgroup |
'!'* Runas_Alias
A Runas_List is similar to a User_List except that instead of
- User_Aliases it can contain Runas_Aliases. Note that usernames and
+ User_Aliases it can contain Runas_Aliases. Note that user names and
groups are matched as strings. In other words, two users (groups) with
the same uid (gid) are considered to be distinct. If you wish to match
- all usernames with the same uid (e.g. root and toor), you can use a uid
- instead (#0 in the example given).
+ all user names with the same uid (e.g. root and toor), you can use a
+ uid instead (#0 in the example given).
Host_List ::= Host |
Host ',' Host_List
- Host ::= '!'* hostname |
+ Host ::= '!'* host name |
'!'* ip_addr |
'!'* network(/netmask)? |
'!'* '+'netgroup |
'!'* Host_Alias
- A Host_List is made up of one or more hostnames, IP addresses, network
+ A Host_List is made up of one or more host names, IP addresses, network
numbers, netgroups (prefixed with '+') and other aliases. Again, the
value of an item may be negated with the '!' operator. If you do not
specify a netmask along with the network number, s\bsu\bud\bdo\bo will query each
corresponds to one of the hosts's network interfaces, the corresponding
netmask will be used. The netmask may be specified either in standard
IP address notation (e.g. 255.255.255.0 or ffff:ffff:ffff:ffff::), or
- CIDR notation (number of bits, e.g. 24 or 64). A hostname may include
+ CIDR notation (number of bits, e.g. 24 or 64). A host name may include
shell-style wildcards (see the Wildcards section below), but unless the
- hostname command on your machine returns the fully qualified hostname,
- you'll need to use the _\bf_\bq_\bd_\bn option for wildcards to be useful.
+ host name command on your machine returns the fully qualified host
+ name, you'll need to use the _\bf_\bq_\bd_\bn option for wildcards to be useful.
+ Note s\bsu\bud\bdo\bo only inspects actual network interfaces; this means that IP
+ address 127.0.0.1 (localhost) will never match. Also, the host name
+ "localhost" will only match if that is the actual host name, which is
+ usually only the case for non-networked systems.
Cmnd_List ::= Cmnd |
Cmnd ',' Cmnd_List
- commandname ::= filename |
- filename args |
- filename '""'
+ commandname ::= file name |
+ file name args |
+ file name '""'
Cmnd ::= '!'* commandname |
'!'* directory |
'!'* Cmnd_Alias
A Cmnd_List is a list of one or more commandnames, directories, and
- other aliases. A commandname is a fully qualified filename which may
- include shell-style wildcards (see the Wildcards section below). A
- simple filename allows the user to run the command with any arguments
- he/she wishes. However, you may also specify command line arguments
- (including wildcards). Alternately, you can specify "" to indicate
+ other aliases. A commandname is a fully qualified file name which may
-1.7.2p5 February 22, 2010 3
+1.7.4 July 21, 2010 3
SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
+ include shell-style wildcards (see the Wildcards section below). A
+ simple file name allows the user to run the command with any arguments
+ he/she wishes. However, you may also specify command line arguments
+ (including wildcards). Alternately, you can specify "" to indicate
that the command may only be run w\bwi\bit\bth\bho\bou\but\bt command line arguments. A
- directory is a fully qualified pathname ending in a '/'. When you
+ directory is a fully qualified path name ending in a '/'. When you
specify a directory in a Cmnd_List, the user will be able to run any
file within that directory (but not in any subdirectories therein).
is not an error to use the -= operator to remove an element that does
not exist in a list.
- Defaults entries are parsed in the following order: generic, host and
- user Defaults first, then runas Defaults and finally command defaults.
-
- See "SUDOERS OPTIONS" for a list of supported Defaults parameters.
-1.7.2p5 February 22, 2010 4
+1.7.4 July 21, 2010 4
SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
+ Defaults entries are parsed in the following order: generic, host and
+ user Defaults first, then runas Defaults and finally command defaults.
+
+ See "SUDOERS OPTIONS" for a list of supported Defaults parameters.
+
U\bUs\bse\ber\br S\bSp\bpe\bec\bci\bif\bfi\bic\bca\bat\bti\bio\bon\bn
User_Spec ::= User_List Host_List '=' Cmnd_Spec_List \
(':' Host_List '=' Cmnd_Spec_List)*
Cmnd_Spec_List ::= Cmnd_Spec |
Cmnd_Spec ',' Cmnd_Spec_List
- Cmnd_Spec ::= Runas_Spec? Tag_Spec* Cmnd
+ Cmnd_Spec ::= Runas_Spec? SELinux_Spec? Tag_Spec* Cmnd
Runas_Spec ::= '(' Runas_List? (':' Runas_List)? ')'
+ SELinux_Spec ::= ('ROLE=role' | 'TYPE=type')
+
Tag_Spec ::= ('NOPASSWD:' | 'PASSWD:' | 'NOEXEC:' | 'EXEC:' |
- 'SETENV:' | 'NOSETENV:' )
+ 'SETENV:' | 'NOSETENV:' | 'LOG_INPUT:' | 'NOLOG_INPUT:' |
+ 'LOG_OUTPUT:' | 'NOLOG_OUTPUT:')
A u\bus\bse\ber\br s\bsp\bpe\bec\bci\bif\bfi\bic\bca\bat\bti\bio\bon\bn determines which commands a user may run (and as
what user) on specified hosts. By default, commands are run as r\bro\boo\bot\bt,
$ sudo -u operator /bin/ls.
- It is also possible to override a Runas_Spec later on in an entry. If
- we modify the entry like so:
- dgb boulder = (operator) /bin/ls, (root) /bin/kill, /usr/bin/lprm
- Then user d\bdg\bgb\bb is now allowed to run _\b/_\bb_\bi_\bn_\b/_\bl_\bs as o\bop\bpe\ber\bra\bat\bto\bor\br, but _\b/_\bb_\bi_\bn_\b/_\bk_\bi_\bl_\bl
- and _\b/_\bu_\bs_\br_\b/_\bb_\bi_\bn_\b/_\bl_\bp_\br_\bm as r\bro\boo\bot\bt.
+1.7.4 July 21, 2010 5
-1.7.2p5 February 22, 2010 5
+SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
+ It is also possible to override a Runas_Spec later on in an entry. If
+ we modify the entry like so:
-SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
+ dgb boulder = (operator) /bin/ls, (root) /bin/kill, /usr/bin/lprm
+ Then user d\bdg\bgb\bb is now allowed to run _\b/_\bb_\bi_\bn_\b/_\bl_\bs as o\bop\bpe\ber\bra\bat\bto\bor\br, but _\b/_\bb_\bi_\bn_\b/_\bk_\bi_\bl_\bl
+ and _\b/_\bu_\bs_\br_\b/_\bb_\bi_\bn_\b/_\bl_\bp_\br_\bm as r\bro\boo\bot\bt.
We can extend this to allow d\bdg\bgb\bb to run /bin/ls with either the user or
group set to o\bop\bpe\ber\bra\bat\bto\bor\br:
tcm boulder = (:dialer) /usr/bin/tip, /usr/bin/cu, \
/usr/local/bin/minicom
+ S\bSE\bEL\bLi\bin\bnu\bux\bx_\b_S\bSp\bpe\bec\bc
+ On systems with SELinux support, _\bs_\bu_\bd_\bo_\be_\br_\bs entries may optionally have an
+ SELinux role and/or type associated with a command. If a role or type
+ is specified with the command it will override any default values
+ specified in _\bs_\bu_\bd_\bo_\be_\br_\bs. A role or type specified on the command line,
+ however, will supercede the values in _\bs_\bu_\bd_\bo_\be_\br_\bs.
+
T\bTa\bag\bg_\b_S\bSp\bpe\bec\bc
A command may have zero or more tags associated with it. There are
- eight possible tag values, NOPASSWD, PASSWD, NOEXEC, EXEC, SETENV and
- NOSETENV. Once a tag is set on a Cmnd, subsequent Cmnds in the
- Cmnd_Spec_List, inherit the tag unless it is overridden by the opposite
- tag (i.e.: PASSWD overrides NOPASSWD and NOEXEC overrides EXEC).
+ eight possible tag values, NOPASSWD, PASSWD, NOEXEC, EXEC, SETENV,
+ NOSETENV, LOG_INPUT, NOLOG_INPUT, LOG_OUTPUT and NOLOG_OUTPUT. Once a
+ tag is set on a Cmnd, subsequent Cmnds in the Cmnd_Spec_List, inherit
+ the tag unless it is overridden by the opposite tag (i.e.: PASSWD
+ overrides NOPASSWD and NOEXEC overrides EXEC).
_\bN_\bO_\bP_\bA_\bS_\bS_\bW_\bD _\ba_\bn_\bd _\bP_\bA_\bS_\bS_\bW_\bD
ray rushmore = NOPASSWD: /bin/kill, PASSWD: /bin/ls, /usr/bin/lprm
Note, however, that the PASSWD tag has no effect on users who are in
+
+
+
+1.7.4 July 21, 2010 6
+
+
+
+
+
+SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
+
+
the group specified by the _\be_\bx_\be_\bm_\bp_\bt_\b__\bg_\br_\bo_\bu_\bp option.
By default, if the NOPASSWD tag is applied to any of the entries for a
dynamically-linked executable from running further commands itself.
In the following example, user a\baa\bar\bro\bon\bn may run _\b/_\bu_\bs_\br_\b/_\bb_\bi_\bn_\b/_\bm_\bo_\br_\be and
-
-
-
-1.7.2p5 February 22, 2010 6
-
-
-
-
-
-SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
-
-
_\b/_\bu_\bs_\br_\b/_\bb_\bi_\bn_\b/_\bv_\bi but shell escapes will be disabled.
aaron shanty = NOEXEC: /usr/bin/more, /usr/bin/vi
restrictions imposed by _\be_\bn_\bv_\b__\bc_\bh_\be_\bc_\bk, _\be_\bn_\bv_\b__\bd_\be_\bl_\be_\bt_\be, or _\be_\bn_\bv_\b__\bk_\be_\be_\bp. As such,
only trusted users should be allowed to set variables in this manner.
If the command matched is A\bAL\bLL\bL, the SETENV tag is implied for that
- command; this default may be overridden by use of the UNSETENV tag.
+ command; this default may be overridden by use of the NOSETENV tag.
+
+ _\bL_\bO_\bG_\b__\bI_\bN_\bP_\bU_\bT _\ba_\bn_\bd _\bN_\bO_\bL_\bO_\bG_\b__\bI_\bN_\bP_\bU_\bT
+
+ These tags override the value of the _\bl_\bo_\bg_\b__\bi_\bn_\bp_\bu_\bt option on a per-command
+ basis. For more information, see the description of _\bl_\bo_\bg_\b__\bi_\bn_\bp_\bu_\bt in the
+ "SUDOERS OPTIONS" section below.
+
+ _\bL_\bO_\bG_\b__\bO_\bU_\bT_\bP_\bU_\bT _\ba_\bn_\bd _\bN_\bO_\bL_\bO_\bG_\b__\bO_\bU_\bT_\bP_\bU_\bT
+
+ These tags override the value of the _\bl_\bo_\bg_\b__\bo_\bu_\bt_\bp_\bu_\bt option on a per-command
+ basis. For more information, see the description of _\bl_\bo_\bg_\b__\bo_\bu_\bt_\bp_\bu_\bt in the
+ "SUDOERS OPTIONS" section below.
W\bWi\bil\bld\bdc\bca\bar\brd\bds\bs
s\bsu\bud\bdo\bo allows shell-style _\bw_\bi_\bl_\bd_\bc_\ba_\br_\bd_\bs (aka meta or glob characters) to be
- used in hostnames, pathnames and command line arguments in the _\bs_\bu_\bd_\bo_\be_\br_\bs
- file. Wildcard matching is done via the P\bPO\bOS\bSI\bIX\bX _\bg_\bl_\bo_\bb(3) and _\bf_\bn_\bm_\ba_\bt_\bc_\bh(3)
- routines. Note that these are _\bn_\bo_\bt regular expressions.
+ used in host names, path names and command line arguments in the
+ _\bs_\bu_\bd_\bo_\be_\br_\bs file. Wildcard matching is done via the P\bPO\bOS\bSI\bIX\bX _\bg_\bl_\bo_\bb(3) and
+ _\bf_\bn_\bm_\ba_\bt_\bc_\bh(3) routines. Note that these are _\bn_\bo_\bt regular expressions.
* Matches any set of zero or more characters.
? Matches any single character.
+
+
+1.7.4 July 21, 2010 7
+
+
+
+
+
+SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
+
+
[...] Matches any character in the specified range.
[!...] Matches any character n\bno\bot\bt in the specified range.
/bin/ls [[\:alpha\:]]*
- Would match any filename beginning with a letter.
+ Would match any file name beginning with a letter.
Note that a forward slash ('/') will n\bno\bot\bt be matched by wildcards used
- in the pathname. When matching the command line arguments, however, a
+ in the path name. When matching the command line arguments, however, a
slash d\bdo\boe\bes\bs get matched by wildcards. This is to make a path like:
/usr/bin/*
The following exceptions apply to the above rules:
"" If the empty string "" is the only command line argument in the
-
-
-
-1.7.2p5 February 22, 2010 7
-
-
-
-
-
-SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
-
-
_\bs_\bu_\bd_\bo_\be_\br_\bs entry it means that command is not allowed to be run
with a\ban\bny\by arguments.
A hard limit of 128 nested include files is enforced to prevent include
file loops.
- The filename may include the %h escape, signifying the short form of
- the hostname. I.e., if the machine's hostname is "xerxes", then
+ The file name may include the %h escape, signifying the short form of
+ the host name. I.e., if the machine's host name is "xerxes", then
#include /etc/sudoers.%h
+
+
+1.7.4 July 21, 2010 8
+
+
+
+
+
+SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
+
+
will cause s\bsu\bud\bdo\bo to include the file _\b/_\be_\bt_\bc_\b/_\bs_\bu_\bd_\bo_\be_\br_\bs_\b._\bx_\be_\br_\bx_\be_\bs.
The #includedir directive can be used to create a _\bs_\bu_\bd_\bo_\b._\bd directory that
The pound sign ('#') is used to indicate a comment (unless it is part
of a #include directive or unless it occurs in the context of a user
name and is followed by one or more digits, in which case it is treated
-
-
-
-1.7.2p5 February 22, 2010 8
-
-
-
-
-
-SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
-
-
as a uid). Both the comment character and any text after it, up to the
end of the line, are ignored.
characters in a _\bU_\bs_\be_\br _\bS_\bp_\be_\bc_\bi_\bf_\bi_\bc_\ba_\bt_\bi_\bo_\bn ('=', ':', '(', ')') is optional.
The following characters must be escaped with a backslash ('\') when
- used as part of a word (e.g. a username or hostname): '@', '!', '=',
+ used as part of a word (e.g. a user name or host name): '@', '!', '=',
':', ',', '(', ')', '\'.
+
+
+
+
+1.7.4 July 21, 2010 9
+
+
+
+
+
+SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
+
+
S\bSU\bUD\bDO\bOE\bER\bRS\bS O\bOP\bPT\bTI\bIO\bON\bNS\bS
s\bsu\bud\bdo\bo's behavior can be modified by Default_Entry lines, as explained
earlier. A list of all supported Defaults parameters, grouped by type,
are listed below.
- F\bFl\bla\bag\bgs\bs:
+ B\bBo\boo\bol\ble\bea\ban\bn F\bFl\bla\bag\bgs\bs:
- always_set_home If set, s\bsu\bud\bdo\bo will set the HOME environment variable to
- the home directory of the target user (which is root
+ always_set_home If enabled, s\bsu\bud\bdo\bo will set the HOME environment variable
+ to the home directory of the target user (which is root
unless the -\b-u\bu option is used). This effectively means
- that the -\b-H\bH option is always implied. This flag is _\bo_\bf_\bf
- by default.
+ that the -\b-H\bH option is always implied. Note that HOME
+ is already set when the the _\be_\bn_\bv_\b__\br_\be_\bs_\be_\bt option is
+ enabled, so _\ba_\bl_\bw_\ba_\by_\bs_\b__\bs_\be_\bt_\b__\bh_\bo_\bm_\be is only effective for
+ configurations where _\be_\bn_\bv_\b__\br_\be_\bs_\be_\bt is disabled. This flag
+ is _\bo_\bf_\bf by default.
authenticate If set, users must authenticate themselves via a
password (or other means of authentication) before they
begins closing open file descriptors. This flag is _\bo_\bf_\bf
by default.
+ compress_io If set, and s\bsu\bud\bdo\bo is configured to log a command's input
+ or output, the I/O logs will be compressed using z\bzl\bli\bib\bb.
+ This flag is _\bo_\bn by default when s\bsu\bud\bdo\bo is compiled with
+ z\bzl\bli\bib\bb support.
+
env_editor If set, v\bvi\bis\bsu\bud\bdo\bo will use the value of the EDITOR or
VISUAL environment variables before falling back on the
-
-
-
-1.7.2p5 February 22, 2010 9
-
-
-
-
-
-SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
-
-
default editor list. Note that this may create a
security hole as it allows the user to run any
arbitrary command as root without logging. A safer
specified in editor. This flag is _\bo_\bf_\bf by default.
env_reset If set, s\bsu\bud\bdo\bo will reset the environment to only contain
- the LOGNAME, SHELL, USER, USERNAME and the SUDO_*
+ the LOGNAME, MAIL, SHELL, USER, USERNAME and the SUDO_*
variables. Any variables in the caller's environment
that match the env_keep and env_check lists are then
added. The default contents of the env_keep and
its value will be used for the PATH environment
variable. This flag is _\bo_\bn by default.
- fqdn Set this flag if you want to put fully qualified
- hostnames in the _\bs_\bu_\bd_\bo_\be_\br_\bs file. I.e., instead of myhost
- you would use myhost.mydomain.edu. You may still use
- the short form if you wish (and even mix the two).
- Beware that turning on _\bf_\bq_\bd_\bn requires s\bsu\bud\bdo\bo to make DNS
- lookups which may make s\bsu\bud\bdo\bo unusable if DNS stops
- working (for example if the machine is not plugged into
- the network). Also note that you must use the host's
+ fast_glob Normally, s\bsu\bud\bdo\bo uses the _\bg_\bl_\bo_\bb(3) function to do shell-
+
+
+
+1.7.4 July 21, 2010 10
+
+
+
+
+
+SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
+
+
+ style globbing when matching path names. However,
+ since it accesses the file system, _\bg_\bl_\bo_\bb(3) can take a
+ long time to complete for some patterns, especially
+ when the pattern references a network file system that
+ is mounted on demand (automounted). The _\bf_\ba_\bs_\bt_\b__\bg_\bl_\bo_\bb
+ option causes s\bsu\bud\bdo\bo to use the _\bf_\bn_\bm_\ba_\bt_\bc_\bh(3) function,
+ which does not access the file system to do its
+ matching. The disadvantage of _\bf_\ba_\bs_\bt_\b__\bg_\bl_\bo_\bb is that it is
+ unable to match relative path names such as _\b._\b/_\bl_\bs or
+ _\b._\b._\b/_\bb_\bi_\bn_\b/_\bl_\bs. This has security implications when path
+ names that include globbing characters are used with
+ the negation operator, '!', as such rules can be
+ trivially bypassed. As such, this option should not be
+ used when _\bs_\bu_\bd_\bo_\be_\br_\bs contains rules that contain negated
+ path names which include globbing characters. This
+ flag is _\bo_\bf_\bf by default.
+
+ fqdn Set this flag if you want to put fully qualified host
+ names in the _\bs_\bu_\bd_\bo_\be_\br_\bs file. I.e., instead of myhost you
+ would use myhost.mydomain.edu. You may still use the
+ short form if you wish (and even mix the two). Beware
+ that turning on _\bf_\bq_\bd_\bn requires s\bsu\bud\bdo\bo to make DNS lookups
+ which may make s\bsu\bud\bdo\bo unusable if DNS stops working (for
+ example if the machine is not plugged into the
+ network). Also note that you must use the host's
official name as DNS knows it. That is, you may not
use a host alias (CNAME entry) due to performance
issues and the fact that there is no way to get all
- aliases from DNS. If your machine's hostname (as
+ aliases from DNS. If your machine's host name (as
returned by the hostname command) is already fully
qualified you shouldn't need to set _\bf_\bq_\bd_\bn. This flag is
_\bo_\bf_\bf by default.
insults If set, s\bsu\bud\bdo\bo will insult users when they enter an
incorrect password. This flag is _\bo_\bf_\bf by default.
+ log_host If set, the host name will be logged in the (non-
-1.7.2p5 February 22, 2010 10
+1.7.4 July 21, 2010 11
SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
- log_host If set, the hostname will be logged in the (non-syslog)
- s\bsu\bud\bdo\bo log file. This flag is _\bo_\bf_\bf by default.
+ syslog) s\bsu\bud\bdo\bo log file. This flag is _\bo_\bf_\bf by default.
log_year If set, the four-digit year will be logged in the (non-
syslog) s\bsu\bud\bdo\bo log file. This flag is _\bo_\bf_\bf by default.
passprompt_override
The password prompt specified by _\bp_\ba_\bs_\bs_\bp_\br_\bo_\bm_\bp_\bt will
- normally only be used if the passwod prompt provided by
+ normally only be used if the password prompt provided
+ by systems such as PAM matches the string "Password:".
-1.7.2p5 February 22, 2010 11
+1.7.4 July 21, 2010 12
SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
- systems such as PAM matches the string "Password:". If
- _\bp_\ba_\bs_\bs_\bp_\br_\bo_\bm_\bp_\bt_\b__\bo_\bv_\be_\br_\br_\bi_\bd_\be is set, _\bp_\ba_\bs_\bs_\bp_\br_\bo_\bm_\bp_\bt will always be
- used. This flag is _\bo_\bf_\bf by default.
+ If _\bp_\ba_\bs_\bs_\bp_\br_\bo_\bm_\bp_\bt_\b__\bo_\bv_\be_\br_\br_\bi_\bd_\be is set, _\bp_\ba_\bs_\bs_\bp_\br_\bo_\bm_\bp_\bt will always
+ be used. This flag is _\bo_\bf_\bf by default.
preserve_groups By default, s\bsu\bud\bdo\bo will initialize the group vector to
the list of groups the target user is in. When
this prevents users from "chaining" s\bsu\bud\bdo\bo commands to
get a root shell by doing something like "sudo sudo
/bin/sh". Note, however, that turning off _\br_\bo_\bo_\bt_\b__\bs_\bu_\bd_\bo
- will also prevent root and from running s\bsu\bud\bdo\boe\bed\bdi\bit\bt.
+ will also prevent root from running s\bsu\bud\bdo\boe\bed\bdi\bit\bt.
Disabling _\br_\bo_\bo_\bt_\b__\bs_\bu_\bd_\bo provides no real additional
security; it exists purely for historical reasons.
This flag is _\bo_\bn by default.
instead of the password of the invoking user. This
flag is _\bo_\bf_\bf by default.
- set_home If set and s\bsu\bud\bdo\bo is invoked with the -\b-s\bs option the HOME
- environment variable will be set to the home directory
- of the target user (which is root unless the -\b-u\bu option
- is used). This effectively makes the -\b-s\bs option imply
- -\b-H\bH. This flag is _\bo_\bf_\bf by default.
+ set_home If enabled and s\bsu\bud\bdo\bo is invoked with the -\b-s\bs option the
+ HOME environment variable will be set to the home
+ directory of the target user (which is root unless the
+ -\b-u\bu option is used). This effectively makes the -\b-s\bs
+ option imply -\b-H\bH. Note that HOME is already set when
+ the the _\be_\bn_\bv_\b__\br_\be_\bs_\be_\bt option is enabled, so _\bs_\be_\bt_\b__\bh_\bo_\bm_\be is
+ only effective for configurations where _\be_\bn_\bv_\b__\br_\be_\bs_\be_\bt is
+ disabled. This flag is _\bo_\bf_\bf by default.
set_logname Normally, s\bsu\bud\bdo\bo will set the LOGNAME, USER and USERNAME
- environment variables to the name of the target user
- (usually root unless the -\b-u\bu option is given). However,
-1.7.2p5 February 22, 2010 12
+1.7.4 July 21, 2010 13
SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
+ environment variables to the name of the target user
+ (usually root unless the -\b-u\bu option is given). However,
since some programs (including the RCS revision control
system) use LOGNAME to determine the real identity of
the user, it may be desirable to change this behavior.
This can be done by negating the set_logname option.
Note that if the _\be_\bn_\bv_\b__\br_\be_\bs_\be_\bt option has not been
disabled, entries in the _\be_\bn_\bv_\b__\bk_\be_\be_\bp list will override
- the value of _\bs_\be_\bt_\b__\bl_\bo_\bg_\bn_\ba_\bm_\be. This flag is _\bo_\bf_\bf by default.
+ the value of _\bs_\be_\bt_\b__\bl_\bo_\bg_\bn_\ba_\bm_\be. This flag is _\bo_\bn by default.
setenv Allow the user to disable the _\be_\bn_\bv_\b__\br_\be_\bs_\be_\bt option from the
command line. Additionally, environment variables set
shell listed in the invoking user's /etc/passwd entry
if not). This flag is _\bo_\bf_\bf by default.
- fast_glob Normally, s\bsu\bud\bdo\bo uses the _\bg_\bl_\bo_\bb(3) function to do shell-
- style globbing when matching pathnames. However, since
- it accesses the file system, _\bg_\bl_\bo_\bb(3) can take a long
- time to complete for some patterns, especially when the
- pattern references a network file system that is
- mounted on demand (automounted). The _\bf_\ba_\bs_\bt_\b__\bg_\bl_\bo_\bb option
- causes s\bsu\bud\bdo\bo to use the _\bf_\bn_\bm_\ba_\bt_\bc_\bh(3) function, which does
- not access the file system to do its matching. The
- disadvantage of _\bf_\ba_\bs_\bt_\b__\bg_\bl_\bo_\bb is that it is unable to match
- relative pathnames such as _\b._\b/_\bl_\bs or _\b._\b._\b/_\bb_\bi_\bn_\b/_\bl_\bs. This
- flag is _\bo_\bf_\bf by default.
-
stay_setuid Normally, when s\bsu\bud\bdo\bo executes a command the real and
effective UIDs are set to the target user (root by
default). This option changes that behavior such that
targetpw If set, s\bsu\bud\bdo\bo will prompt for the password of the user
specified by the -\b-u\bu option (defaults to root) instead
- of the password of the invoking user. Note that this
- precludes the use of a uid not listed in the passwd
- database as an argument to the -\b-u\bu option. This flag is
- _\bo_\bf_\bf by default.
+ of the password of the invoking user. In addition, the
+ timestamp file name will include the target user's
+ name. Note that this flag precludes the use of a uid
+ not listed in the passwd database as an argument to the
+ -\b-u\bu option. This flag is _\bo_\bf_\bf by default.
- tty_tickets If set, users must authenticate on a per-tty basis.
+ log_input If set, s\bsu\bud\bdo\bo will run the command in a _\bp_\bs_\be_\bu_\bd_\bo _\bt_\bt_\by and
+ log all user input. If the standard input is not
+ connected to the user's tty, due to I/O redirection or
+ because the command is part of a pipeline, that input
+ is also captured and stored in a separate log file.
+ Input is logged to the _\b/_\bv_\ba_\br_\b/_\bl_\bo_\bg_\b/_\bs_\bu_\bd_\bo_\b-_\bi_\bo directory using
+ a unique session ID that is included in the normal s\bsu\bud\bdo\bo
+ log line, prefixed with _\bT_\bS_\bI_\bD_\b=.
-1.7.2p5 February 22, 2010 13
+
+
+1.7.4 July 21, 2010 14
SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
- Normally, s\bsu\bud\bdo\bo uses a directory in the ticket dir with
- the same name as the user running it. With this flag
- enabled, s\bsu\bud\bdo\bo will use a file named for the tty the
- user is logged in on in that directory. This flag is
- _\bo_\bf_\bf by default.
+ log_output If set, s\bsu\bud\bdo\bo will run the command in a _\bp_\bs_\be_\bu_\bd_\bo _\bt_\bt_\by and
+ log all output that is sent to the screen, similar to
+ the _\bs_\bc_\br_\bi_\bp_\bt(1) command. If the standard output or
+ standard error is not connected to the user's tty, due
+ to I/O redirection or because the command is part of a
+ pipeline, that output is also captured and stored in
+ separate log files.
+
+ Output is logged to the _\b/_\bv_\ba_\br_\b/_\bl_\bo_\bg_\b/_\bs_\bu_\bd_\bo_\b-_\bi_\bo directory
+ using a unique session ID that is included in the
+ normal s\bsu\bud\bdo\bo log line, prefixed with _\bT_\bS_\bI_\bD_\b=.
+
+ Output logs may be viewed with the _\bs_\bu_\bd_\bo_\br_\be_\bp_\bl_\ba_\by(1m)
+ utility, which can also be used to list or search the
+ available logs.
+
+ tty_tickets If set, users must authenticate on a per-tty basis.
+ With this flag enabled, s\bsu\bud\bdo\bo will use a file named for
+ the tty the user is logged in on in the user's time
+ stamp directory. If disabled, the time stamp of the
+ directory is used instead. This flag is _\bo_\bn by default.
umask_override If set, s\bsu\bud\bdo\bo will set the umask as specified by _\bs_\bu_\bd_\bo_\be_\br_\bs
without modification. This makes it possible to
available if s\bsu\bud\bdo\bo is configured with the
--with-logincap option. This flag is _\bo_\bf_\bf by default.
+ use_pty If set, s\bsu\bud\bdo\bo will run the command in a pseudo-pty even
+ if no I/O logging is being gone. A malicious program
+ run under s\bsu\bud\bdo\bo could conceivably fork a background
+ process that retains to the user's terminal device
+ after the main program has finished executing. Use of
+ this option will make that impossible.
+
visiblepw By default, s\bsu\bud\bdo\bo will refuse to run if the user must
enter a password but it is not possible to disable echo
on the terminal. If the _\bv_\bi_\bs_\bi_\bb_\bl_\be_\bp_\bw flag is set, s\bsu\bud\bdo\bo
closefrom Before it executes a command, s\bsu\bud\bdo\bo will close all open
file descriptors other than standard input, standard
+
+
+
+1.7.4 July 21, 2010 15
+
+
+
+
+
+SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
+
+
output and standard error (ie: file descriptors 0-2).
The _\bc_\bl_\bo_\bs_\be_\bf_\br_\bo_\bm option can be used to specify a different
file descriptor at which to start closing. The default
the option to disable word wrap).
passwd_timeout Number of minutes before the s\bsu\bud\bdo\bo password prompt times
- out. The default is 5; set this to 0 for no password
- timeout.
+ out, or 0 for no timeout. The timeout may include a
+ fractional component if minute granularity is
+ insufficient, for example 2.5. The default is 5.
timestamp_timeout
Number of minutes that can elapse before s\bsu\bud\bdo\bo will ask
-
-
-
-1.7.2p5 February 22, 2010 14
-
-
-
-
-
-SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
-
-
- for a passwd again. The default is 5. Set this to 0
- to always prompt for a password. If set to a value
- less than 0 the user's timestamp will never expire.
- This can be used to allow users to create or delete
- their own timestamps via sudo -v and sudo -k
+ for a passwd again. The timeout may include a
+ fractional component if minute granularity is
+ insufficient, for example 2.5. The default is 5. Set
+ this to 0 to always prompt for a password. If set to a
+ value less than 0 the user's timestamp will never
+ expire. This can be used to allow users to create or
+ delete their own timestamps via sudo -v and sudo -k
respectively.
umask Umask to use when running the command. Negate this
used with v\bvi\bis\bsu\bud\bdo\bo. v\bvi\bis\bsu\bud\bdo\bo will choose the editor that
matches the user's EDITOR environment variable if
possible, or the first editor in the list that exists
- and is executable. The default is the path to vi on
- your system.
+ and is executable. The default is "vi".
+
+
+
+
+1.7.4 July 21, 2010 16
+
+
+
+
+
+SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
+
mailsub Subject of the mail sent to the _\bm_\ba_\bi_\bl_\bt_\bo user. The escape
- %h will expand to the hostname of the machine. Default
- is *** SECURITY information for %h ***.
+ %h will expand to the host name of the machine.
+ Default is *** SECURITY information for %h ***.
noexec_file Path to a shared library containing dummy versions of
the _\be_\bx_\be_\bc_\bv_\b(_\b), _\be_\bx_\be_\bc_\bv_\be_\b(_\b) and _\bf_\be_\bx_\be_\bc_\bv_\be_\b(_\b) library functions
environment variable. The following percent (`%')
escapes are supported:
- %H expanded to the local hostname including the domain
- name (on if the machine's hostname is fully
+ %H expanded to the local host name including the
+ domain name (on if the machine's host name is fully
qualified or the _\bf_\bq_\bd_\bn option is set)
- %h expanded to the local hostname without the domain
+ %h expanded to the local host name without the domain
name
%p expanded to the user whose password is being asked
for (respects the _\br_\bo_\bo_\bt_\bp_\bw, _\bt_\ba_\br_\bg_\be_\bt_\bp_\bw and _\br_\bu_\bn_\ba_\bs_\bp_\bw
-
-
-
-1.7.2p5 February 22, 2010 15
-
-
-
-
-
-SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
-
-
flags in _\bs_\bu_\bd_\bo_\be_\br_\bs)
%U expanded to the login name of the user the command
The default value is Password:.
+ role The default SELinux role to use when constructing a new
+ security context to run the command. The default role
+ may be overridden on a per-command basis in _\bs_\bu_\bd_\bo_\be_\br_\bs or
+ via command line options. This option is only
+ available whe s\bsu\bud\bdo\bo is built with SELinux support.
+
runas_default The default user to run commands as if the -\b-u\bu option is
not specified on the command line. This defaults to
root. Note that if _\br_\bu_\bn_\ba_\bs_\b__\bd_\be_\bf_\ba_\bu_\bl_\bt is set it m\bmu\bus\bst\bt occur
syslog_goodpri Syslog priority to use when user authenticates
successfully. Defaults to notice.
+
+
+
+1.7.4 July 21, 2010 17
+
+
+
+
+
+SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
+
+
sudoers_locale Locale to use when parsing the sudoers file. Note that
changing the locale may affect how sudoers is
interpreted. Defaults to "C".
timestampdir The directory in which s\bsu\bud\bdo\bo stores its timestamp files.
- The default is _\b/_\bv_\ba_\br_\b/_\br_\bu_\bn_\b/_\bs_\bu_\bd_\bo.
+ The default is _\b/_\bv_\ba_\br_\b/_\ba_\bd_\bm_\b/_\bs_\bu_\bd_\bo.
timestampowner The owner of the timestamp directory and the timestamps
stored therein. The default is root.
+ type The default SELinux type to use when constructing a new
+ security context to run the command. The default type
+ may be overridden on a per-command basis in _\bs_\bu_\bd_\bo_\be_\br_\bs or
+ via command line options. This option is only
+ available whe s\bsu\bud\bdo\bo is built with SELinux support.
+
S\bSt\btr\bri\bin\bng\bgs\bs t\bth\bha\bat\bt c\bca\ban\bn b\bbe\be u\bus\bse\bed\bd i\bin\bn a\ba b\bbo\boo\bol\ble\bea\ban\bn c\bco\bon\bnt\bte\bex\bxt\bt:
askpass The _\ba_\bs_\bk_\bp_\ba_\bs_\bs option specifies the fully qualified path to a
quotes. Variables in this file are subject to other s\bsu\bud\bdo\bo
environment settings such as _\be_\bn_\bv_\b__\bk_\be_\be_\bp and _\be_\bn_\bv_\b__\bc_\bh_\be_\bc_\bk.
-
-
-
-
-1.7.2p5 February 22, 2010 16
-
-
-
-
-
-SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
-
-
exempt_group
Users in this group are exempt from password and PATH
requirements. This is not set by default.
Negating the option results in a value of _\bn_\be_\bv_\be_\br being used.
The default value is _\bo_\bn_\bc_\be.
+
+
+
+1.7.4 July 21, 2010 18
+
+
+
+
+
+SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
+
+
lecture_file
Path to a file containing an alternate s\bsu\bud\bdo\bo lecture that
will be used in place of the standard lecture if the named
mailerpath Path to mail program used to send warning mail. Defaults
to the path to sendmail found at configure time.
-
-
-
-1.7.2p5 February 22, 2010 17
-
-
-
-
-
-SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
-
-
mailfrom Address to use for the "from" address when sending warning
and error mail. The address should be enclosed in double
quotes (") to protect against s\bsu\bud\bdo\bo interpreting the @ sign.
option is not set by default.
syslog Syslog facility if syslog is being used for logging (negate
- to disable syslog logging). Defaults to local2.
+
+
+
+1.7.4 July 21, 2010 19
+
+
+
+
+
+SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
+
+
+ to disable syslog logging). Defaults to auth.
verifypw This option controls when a password will be required when
a user runs s\bsu\bud\bdo\bo with the -\b-v\bv option. It has the following
disabled by using the =, +=, -=, and ! operators
respectively. Regardless of whether the env_reset
option is enabled or disabled, variables specified by
-
-
-
-1.7.2p5 February 22, 2010 18
-
-
-
-
-
-SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
-
-
env_check will be preserved in the environment if they
pass the aforementioned check. The default list of
environment variables to check is displayed when s\bsu\bud\bdo\bo
any setuid process (such as s\bsu\bud\bdo\bo).
env_keep Environment variables to be preserved in the user's
+
+
+
+1.7.4 July 21, 2010 20
+
+
+
+
+
+SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
+
+
environment when the _\be_\bn_\bv_\b__\br_\be_\bs_\be_\bt option is in effect.
This allows fine-grained control over the environment
s\bsu\bud\bdo\bo-spawned processes will receive. The argument may
_\b/_\be_\bt_\bc_\b/_\bn_\be_\bt_\bg_\br_\bo_\bu_\bp List of network groups
+ _\b/_\bv_\ba_\br_\b/_\bl_\bo_\bg_\b/_\bs_\bu_\bd_\bo_\b-_\bi_\bo I/O log files
+
E\bEX\bXA\bAM\bMP\bPL\bLE\bES\bS
Below are example _\bs_\bu_\bd_\bo_\be_\br_\bs entries. Admittedly, some of these are a bit
- contrived. First, we define our _\ba_\bl_\bi_\ba_\bs_\be_\bs:
+ contrived. First, we allow a few environment variables to pass and
+ then define our _\ba_\bl_\bi_\ba_\bs_\be_\bs:
+
+ # Run X applications through sudo; HOME is used to find the
+ # .Xauthority file. Note that other programs use HOME to find
+ # configuration files and this may lead to privilege escalation!
+ Defaults env_keep += "DISPLAY HOME"
# User alias specification
User_Alias FULLTIMERS = millert, mikef, dowdy
# Runas alias specification
Runas_Alias OP = root, operator
Runas_Alias DB = oracle, sybase
+ Runas_Alias ADMINGRP = adm, oper
+ # Host alias specification
+ Host_Alias SPARC = bigtime, eclipse, moet, anchor :\
+ SGI = grolsch, dandelion, black :\
+ ALPHA = widget, thalamus, foobar :\
+ HPPA = boa, nag, python
+ Host_Alias CUNETS = 128.138.0.0/255.255.0.0
+ Host_Alias CSNETS = 128.138.243.0, 128.138.204.0/24, 128.138.242.0
+ Host_Alias SERVERS = master, mail, www, ns
-1.7.2p5 February 22, 2010 19
+1.7.4 July 21, 2010 21
-SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
+SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
- Runas_Alias ADMINGRP = adm, oper
- # Host alias specification
- Host_Alias SPARC = bigtime, eclipse, moet, anchor :\
- SGI = grolsch, dandelion, black :\
- ALPHA = widget, thalamus, foobar :\
- HPPA = boa, nag, python
- Host_Alias CUNETS = 128.138.0.0/255.255.0.0
- Host_Alias CSNETS = 128.138.243.0, 128.138.204.0/24, 128.138.242.0
- Host_Alias SERVERS = master, mail, www, ns
Host_Alias CDROM = orion, perseus, hercules
# Cmnd alias specification
We let r\bro\boo\bot\bt and any user in group w\bwh\bhe\bee\bel\bl run any command on any host as
any user.
+ FULLTIMERS ALL = NOPASSWD: ALL
+ Full time sysadmins (m\bmi\bil\bll\ble\ber\brt\bt, m\bmi\bik\bke\bef\bf, and d\bdo\bow\bwd\bdy\by) may run any command on
+ any host without authenticating themselves.
+ PARTTIMERS ALL = ALL
-1.7.2p5 February 22, 2010 20
-
+ Part time sysadmins (b\bbo\bos\bst\btl\ble\bey\by, j\bjw\bwf\bfo\box\bx, and c\bcr\bra\baw\bwl\bl) may run any command on
+ any host but they must authenticate themselves first (since the entry
+ lacks the NOPASSWD tag).
+1.7.4 July 21, 2010 22
-SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
- FULLTIMERS ALL = NOPASSWD: ALL
- Full time sysadmins (m\bmi\bil\bll\ble\ber\brt\bt, m\bmi\bik\bke\bef\bf, and d\bdo\bow\bwd\bdy\by) may run any command on
- any host without authenticating themselves.
- PARTTIMERS ALL = ALL
+SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
- Part time sysadmins (b\bbo\bos\bst\btl\ble\bey\by, j\bjw\bwf\bfo\box\bx, and c\bcr\bra\baw\bwl\bl) may run any command on
- any host but they must authenticate themselves first (since the entry
- lacks the NOPASSWD tag).
jack CSNETS = ALL
The user p\bpe\bet\bte\be is allowed to change anyone's password except for root on
the _\bH_\bP_\bP_\bA machines. Note that this assumes _\bp_\ba_\bs_\bs_\bw_\bd(1) does not take
- multiple usernames on the command line.
+ multiple user names on the command line.
bob SPARC = (OP) ALL : SGI = (OP) ALL
jim +biglab = ALL
+ The user j\bji\bim\bm may run any command on machines in the _\bb_\bi_\bg_\bl_\ba_\bb netgroup.
+ s\bsu\bud\bdo\bo knows that "biglab" is a netgroup due to the '+' prefix.
+ +secretaries ALL = PRINTING, /usr/bin/adduser, /usr/bin/rmuser
+ Users in the s\bse\bec\bcr\bre\bet\bta\bar\bri\bie\bes\bs netgroup need to help manage the printers as
+ well as add and remove users, so they are allowed to run those commands
+ on all machines.
-1.7.2p5 February 22, 2010 21
+ fred ALL = (DB) NOPASSWD: ALL
+1.7.4 July 21, 2010 23
-SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
- The user j\bji\bim\bm may run any command on machines in the _\bb_\bi_\bg_\bl_\ba_\bb netgroup.
- s\bsu\bud\bdo\bo knows that "biglab" is a netgroup due to the '+' prefix.
- +secretaries ALL = PRINTING, /usr/bin/adduser, /usr/bin/rmuser
- Users in the s\bse\bec\bcr\bre\bet\bta\bar\bri\bie\bes\bs netgroup need to help manage the printers as
- well as add and remove users, so they are allowed to run those commands
- on all machines.
+SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
- fred ALL = (DB) NOPASSWD: ALL
The user f\bfr\bre\bed\bd can run commands as any user in the _\bD_\bB Runas_Alias
(o\bor\bra\bac\bcl\ble\be or s\bsy\byb\bba\bas\bse\be) without giving a password.
This is a bit tedious for users to type, so it is a prime candidate for
encapsulating in a shell script.
+S\bSE\bEC\bCU\bUR\bRI\bIT\bTY\bY N\bNO\bOT\bTE\bES\bS
+ It is generally not effective to "subtract" commands from ALL using the
+ '!' operator. A user can trivially circumvent this by copying the
+ desired command to a different name and then executing that. For
+ example:
+ bill ALL = ALL, !SU, !SHELLS
+ Doesn't really prevent b\bbi\bil\bll\bl from running the commands listed in _\bS_\bU or
+ _\bS_\bH_\bE_\bL_\bL_\bS since he can simply copy those commands to a different name, or
+ use a shell escape from an editor or other program. Therefore, these
-1.7.2p5 February 22, 2010 22
+1.7.4 July 21, 2010 24
-SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
-S\bSE\bEC\bCU\bUR\bRI\bIT\bTY\bY N\bNO\bOT\bTE\bES\bS
- It is generally not effective to "subtract" commands from ALL using the
- '!' operator. A user can trivially circumvent this by copying the
- desired command to a different name and then executing that. For
- example:
+SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
- bill ALL = ALL, !SU, !SHELLS
- Doesn't really prevent b\bbi\bil\bll\bl from running the commands listed in _\bS_\bU or
- _\bS_\bH_\bE_\bL_\bL_\bS since he can simply copy those commands to a different name, or
- use a shell escape from an editor or other program. Therefore, these
kind of restrictions should be considered advisory at best (and
reinforced by policy).
+ Furthermore, if the _\bf_\ba_\bs_\bt_\b__\bg_\bl_\bo_\bb option is in use, it is not possible to
+ reliably negate commands where the path name includes globbing (aka
+ wildcard) characters. This is because the C library's _\bf_\bn_\bm_\ba_\bt_\bc_\bh(3)
+ function cannot resolve relative paths. While this is typically only
+ an inconvenience for rules that grant privileges, it can result in a
+ security issue for rules that subtract or revoke privileges.
+
+ For example, given the following _\bs_\bu_\bd_\bo_\be_\br_\bs entry:
+
+ john ALL = /usr/bin/passwd [a-zA-Z0-9]*, /usr/bin/chsh [a-zA-Z0-9]*,
+ /usr/bin/chfn [a-zA-Z0-9]*, !/usr/bin/* root
+
+ User j\bjo\boh\bhn\bn can still run /usr/bin/passwd root if _\bf_\ba_\bs_\bt_\b__\bg_\bl_\bo_\bb is enabled by
+ changing to _\b/_\bu_\bs_\br_\b/_\bb_\bi_\bn and running ./passwd root instead.
+
P\bPR\bRE\bEV\bVE\bEN\bNT\bTI\bIN\bNG\bG S\bSH\bHE\bEL\bLL\bL E\bES\bSC\bCA\bAP\bPE\bES\bS
Once s\bsu\bud\bdo\bo executes a program, that program is free to do whatever it
pleases, including run other programs. This can be a security issue
File containing dummy exec functions:
- then s\bsu\bud\bdo\bo may be able to replace the exec family of functions
- in the standard library with its own that simply return an
- error. Unfortunately, there is no foolproof way to know
- whether or not _\bn_\bo_\be_\bx_\be_\bc will work at compile-time. _\bn_\bo_\be_\bx_\be_\bc
-1.7.2p5 February 22, 2010 23
+1.7.4 July 21, 2010 25
SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
+ then s\bsu\bud\bdo\bo may be able to replace the exec family of functions
+ in the standard library with its own that simply return an
+ error. Unfortunately, there is no foolproof way to know
+ whether or not _\bn_\bo_\be_\bx_\be_\bc will work at compile-time. _\bn_\bo_\be_\bx_\be_\bc
should work on SunOS, Solaris, *BSD, Linux, IRIX, Tru64 UNIX,
MacOS X, and HP-UX 11.x. It is known n\bno\bot\bt to work on AIX and
UnixWare. _\bn_\bo_\be_\bx_\be_\bc is expected to work on most operating
syntactically incorrect _\bs_\bu_\bd_\bo_\be_\br_\bs file.
When using netgroups of machines (as opposed to users), if you store
- fully qualified hostnames in the netgroup (as is usually the case), you
- either need to have the machine's hostname be fully qualified as
+ fully qualified host name in the netgroup (as is usually the case), you
+ either need to have the machine's host name be fully qualified as
returned by the hostname command or use the _\bf_\bq_\bd_\bn option in _\bs_\bu_\bd_\bo_\be_\br_\bs.
B\bBU\bUG\bGS\bS
http://www.sudo.ws/mailman/listinfo/sudo-users to subscribe or search
the archives.
-D\bDI\bIS\bSC\bCL\bLA\bAI\bIM\bME\bER\bR
- s\bsu\bud\bdo\bo is provided ``AS IS'' and any express or implied warranties,
- including, but not limited to, the implied warranties of
- merchantability and fitness for a particular purpose are disclaimed.
- See the LICENSE file distributed with s\bsu\bud\bdo\bo or
-1.7.2p5 February 22, 2010 24
+
+1.7.4 July 21, 2010 26
SUDOERS(4) MAINTENANCE COMMANDS SUDOERS(4)
+D\bDI\bIS\bSC\bCL\bLA\bAI\bIM\bME\bER\bR
+ s\bsu\bud\bdo\bo is provided ``AS IS'' and any express or implied warranties,
+ including, but not limited to, the implied warranties of
+ merchantability and fitness for a particular purpose are disclaimed.
+ See the LICENSE file distributed with s\bsu\bud\bdo\bo or
http://www.sudo.ws/sudo/license.html for complete details.
-
-
-
-
-
-1.7.2p5 February 22, 2010 25
+1.7.4 July 21, 2010 27