* Copyright (C) 2006, 2007 by Dominic Rath *
* Dominic.Rath@gmx.de *
* *
- * Copyright (C) 2007,2008 Øyvind Harboe *
+ * Copyright (C) 2007,2008 Øyvind Harboe *
* oyvind.harboe@zylin.com *
* *
+ * Copyright (C) 2009 Michael Schwingen *
+ * michael@schwingen.org *
+ * *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* You should have received a copy of the GNU General Public License *
* along with this program; if not, write to the *
* Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
***************************************************************************/
+
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
-#include "replacements.h"
-
+#include "breakpoints.h"
#include "xscale.h"
-
-#include "arm7_9_common.h"
-#include "register.h"
-#include "target.h"
-#include "armv4_5.h"
+#include "target_type.h"
+#include "arm_jtag.h"
#include "arm_simulator.h"
#include "arm_disassembler.h"
-#include "log.h"
-#include "jtag.h"
-#include "binarybuffer.h"
-#include "time_support.h"
-#include "breakpoints.h"
-#include "fileio.h"
-
-#include <stdlib.h>
-#include <string.h>
-
-#include <sys/types.h>
-#include <unistd.h>
-#include <errno.h>
-
+#include <helper/time_support.h>
+#include "register.h"
+#include "image.h"
+#include "arm_opcodes.h"
+#include "armv4_5.h"
-/* cli handling */
-int xscale_register_commands(struct command_context_s *cmd_ctx);
+/*
+ * Important XScale documents available as of October 2009 include:
+ *
+ * Intel XScale® Core Developer’s Manual, January 2004
+ * Order Number: 273473-002
+ * This has a chapter detailing debug facilities, and punts some
+ * details to chip-specific microarchitecture documents.
+ *
+ * Hot-Debug for Intel XScale® Core Debug White Paper, May 2005
+ * Document Number: 273539-005
+ * Less detailed than the developer's manual, but summarizes those
+ * missing details (for most XScales) and gives LOTS of notes about
+ * debugger/handler interaction issues. Presents a simpler reset
+ * and load-handler sequence than the arch doc. (Note, OpenOCD
+ * doesn't currently support "Hot-Debug" as defined there.)
+ *
+ * Chip-specific microarchitecture documents may also be useful.
+ */
/* forward declarations */
-int xscale_target_create(struct target_s *target, Jim_Interp *interp);
-int xscale_init_target(struct command_context_s *cmd_ctx, struct target_s *target);
-int xscale_quit(void);
-
-int xscale_arch_state(struct target_s *target);
-int xscale_poll(target_t *target);
-int xscale_halt(target_t *target);
-int xscale_resume(struct target_s *target, int current, u32 address, int handle_breakpoints, int debug_execution);
-int xscale_step(struct target_s *target, int current, u32 address, int handle_breakpoints);
-int xscale_debug_entry(target_t *target);
-int xscale_restore_context(target_t *target);
-
-int xscale_assert_reset(target_t *target);
-int xscale_deassert_reset(target_t *target);
-int xscale_soft_reset_halt(struct target_s *target);
-
-int xscale_set_reg_u32(reg_t *reg, u32 value);
-
-int xscale_read_core_reg(struct target_s *target, int num, enum armv4_5_mode mode);
-int xscale_write_core_reg(struct target_s *target, int num, enum armv4_5_mode mode, u32 value);
-
-int xscale_read_memory(struct target_s *target, u32 address, u32 size, u32 count, u8 *buffer);
-int xscale_write_memory(struct target_s *target, u32 address, u32 size, u32 count, u8 *buffer);
-int xscale_bulk_write_memory(target_t *target, u32 address, u32 count, u8 *buffer);
-
-int xscale_add_breakpoint(struct target_s *target, breakpoint_t *breakpoint);
-int xscale_remove_breakpoint(struct target_s *target, breakpoint_t *breakpoint);
-int xscale_set_breakpoint(struct target_s *target, breakpoint_t *breakpoint);
-int xscale_unset_breakpoint(struct target_s *target, breakpoint_t *breakpoint);
-int xscale_add_watchpoint(struct target_s *target, watchpoint_t *watchpoint);
-int xscale_remove_watchpoint(struct target_s *target, watchpoint_t *watchpoint);
-void xscale_enable_watchpoints(struct target_s *target);
-void xscale_enable_breakpoints(struct target_s *target);
-static int xscale_virt2phys(struct target_s *target, u32 virtual, u32 *physical);
-static int xscale_mmu(struct target_s *target, int *enabled);
-
-int xscale_read_trace(target_t *target);
-
-target_type_t xscale_target =
-{
- .name = "xscale",
-
- .poll = xscale_poll,
- .arch_state = xscale_arch_state,
-
- .target_request_data = NULL,
-
- .halt = xscale_halt,
- .resume = xscale_resume,
- .step = xscale_step,
-
- .assert_reset = xscale_assert_reset,
- .deassert_reset = xscale_deassert_reset,
- .soft_reset_halt = xscale_soft_reset_halt,
-
- .get_gdb_reg_list = armv4_5_get_gdb_reg_list,
-
- .read_memory = xscale_read_memory,
- .write_memory = xscale_write_memory,
- .bulk_write_memory = xscale_bulk_write_memory,
- .checksum_memory = arm7_9_checksum_memory,
- .blank_check_memory = arm7_9_blank_check_memory,
-
- .run_algorithm = armv4_5_run_algorithm,
-
- .add_breakpoint = xscale_add_breakpoint,
- .remove_breakpoint = xscale_remove_breakpoint,
- .add_watchpoint = xscale_add_watchpoint,
- .remove_watchpoint = xscale_remove_watchpoint,
-
- .register_commands = xscale_register_commands,
- .target_create = xscale_target_create,
- .init_target = xscale_init_target,
- .quit = xscale_quit,
-
- .virt2phys = xscale_virt2phys,
- .mmu = xscale_mmu
-};
-
-char* xscale_reg_list[] =
-{
+static int xscale_resume(struct target *, int current,
+ uint32_t address, int handle_breakpoints, int debug_execution);
+static int xscale_debug_entry(struct target *);
+static int xscale_restore_banked(struct target *);
+static int xscale_get_reg(struct reg *reg);
+static int xscale_set_reg(struct reg *reg, uint8_t *buf);
+static int xscale_set_breakpoint(struct target *, struct breakpoint *);
+static int xscale_set_watchpoint(struct target *, struct watchpoint *);
+static int xscale_unset_breakpoint(struct target *, struct breakpoint *);
+static int xscale_read_trace(struct target *);
+
+/* This XScale "debug handler" is loaded into the processor's
+ * mini-ICache, which is 2K of code writable only via JTAG.
+ *
+ * FIXME the OpenOCD "bin2char" utility currently doesn't handle
+ * binary files cleanly. It's string oriented, and terminates them
+ * with a NUL character. Better would be to generate the constants
+ * and let other code decide names, scoping, and other housekeeping.
+ */
+static /* unsigned const char xscale_debug_handler[] = ... */
+#include "xscale_debug.h"
+
+static char *const xscale_reg_list[] = {
"XSCALE_MAINID", /* 0 */
"XSCALE_CACHETYPE",
"XSCALE_CTRL",
"XSCALE_TXRXCTRL",
};
-xscale_reg_t xscale_reg_arch_info[] =
-{
+static const struct xscale_reg xscale_reg_arch_info[] = {
{XSCALE_MAINID, NULL},
{XSCALE_CACHETYPE, NULL},
{XSCALE_CTRL, NULL},
{XSCALE_TBREG, NULL},
{XSCALE_CHKPT0, NULL},
{XSCALE_CHKPT1, NULL},
- {XSCALE_DCSR, NULL}, /* DCSR accessed via JTAG or SW */
- {-1, NULL}, /* TX accessed via JTAG */
- {-1, NULL}, /* RX accessed via JTAG */
- {-1, NULL}, /* TXRXCTRL implicit access via JTAG */
+ {XSCALE_DCSR, NULL}, /* DCSR accessed via JTAG or SW */
+ {-1, NULL}, /* TX accessed via JTAG */
+ {-1, NULL}, /* RX accessed via JTAG */
+ {-1, NULL}, /* TXRXCTRL implicit access via JTAG */
};
-int xscale_reg_arch_type = -1;
-
-int xscale_get_reg(reg_t *reg);
-int xscale_set_reg(reg_t *reg, u8 *buf);
-
-int xscale_get_arch_pointers(target_t *target, armv4_5_common_t **armv4_5_p, xscale_common_t **xscale_p)
+/* convenience wrapper to access XScale specific registers */
+static int xscale_set_reg_u32(struct reg *reg, uint32_t value)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
+ uint8_t buf[4];
- if (armv4_5->common_magic != ARMV4_5_COMMON_MAGIC)
- {
- LOG_ERROR("target isn't an XScale target");
- return -1;
- }
+ buf_set_u32(buf, 0, 32, value);
- if (xscale->common_magic != XSCALE_COMMON_MAGIC)
- {
- LOG_ERROR("target isn't an XScale target");
- return -1;
- }
+ return xscale_set_reg(reg, buf);
+}
- *armv4_5_p = armv4_5;
- *xscale_p = xscale;
+static const char xscale_not[] = "target is not an XScale";
+static int xscale_verify_pointer(struct command_context *cmd_ctx,
+ struct xscale_common *xscale)
+{
+ if (xscale->common_magic != XSCALE_COMMON_MAGIC) {
+ command_print(cmd_ctx, xscale_not);
+ return ERROR_TARGET_INVALID;
+ }
return ERROR_OK;
}
-int xscale_jtag_set_instr(int chain_pos, u32 new_instr)
+static int xscale_jtag_set_instr(struct jtag_tap *tap, uint32_t new_instr, tap_state_t end_state)
{
- jtag_device_t *device = jtag_get_device(chain_pos);
- if (device==NULL)
- return ERROR_FAIL;
-
- if (buf_get_u32(device->cur_instr, 0, device->ir_length) != new_instr)
- {
- scan_field_t field;
+ assert(tap != NULL);
- field.device = chain_pos;
- field.num_bits = device->ir_length;
- field.out_value = calloc(CEIL(field.num_bits, 8), 1);
- buf_set_u32(field.out_value, 0, field.num_bits, new_instr);
- field.out_mask = NULL;
- field.in_value = NULL;
- jtag_set_check_value(&field, device->expected, device->expected_mask, NULL);
+ if (buf_get_u32(tap->cur_instr, 0, tap->ir_length) != new_instr) {
+ struct scan_field field;
+ uint8_t scratch[4];
- jtag_add_ir_scan(1, &field, -1);
+ memset(&field, 0, sizeof field);
+ field.num_bits = tap->ir_length;
+ field.out_value = scratch;
+ buf_set_u32(scratch, 0, field.num_bits, new_instr);
- free(field.out_value);
+ jtag_add_ir_scan(tap, &field, end_state);
}
return ERROR_OK;
}
-int xscale_read_dcsr(target_t *target)
+static int xscale_read_dcsr(struct target *target)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
-
+ struct xscale_common *xscale = target_to_xscale(target);
int retval;
-
- scan_field_t fields[3];
- u8 field0 = 0x0;
- u8 field0_check_value = 0x2;
- u8 field0_check_mask = 0x7;
- u8 field2 = 0x0;
- u8 field2_check_value = 0x0;
- u8 field2_check_mask = 0x1;
-
- jtag_add_end_state(TAP_PD);
- xscale_jtag_set_instr(xscale->jtag_info.chain_pos, xscale->jtag_info.dcsr);
+ struct scan_field fields[3];
+ uint8_t field0 = 0x0;
+ uint8_t field0_check_value = 0x2;
+ uint8_t field0_check_mask = 0x7;
+ uint8_t field2 = 0x0;
+ uint8_t field2_check_value = 0x0;
+ uint8_t field2_check_mask = 0x1;
+
+ xscale_jtag_set_instr(target->tap,
+ XSCALE_SELDCSR << xscale->xscale_variant,
+ TAP_DRPAUSE);
buf_set_u32(&field0, 1, 1, xscale->hold_rst);
buf_set_u32(&field0, 2, 1, xscale->external_debug_break);
- fields[0].device = xscale->jtag_info.chain_pos;
+ memset(&fields, 0, sizeof fields);
+
fields[0].num_bits = 3;
fields[0].out_value = &field0;
- fields[0].out_mask = NULL;
- fields[0].in_value = NULL;
- jtag_set_check_value(fields+0, &field0_check_value, &field0_check_mask, NULL);
+ uint8_t tmp;
+ fields[0].in_value = &tmp;
- fields[1].device = xscale->jtag_info.chain_pos;
fields[1].num_bits = 32;
- fields[1].out_value = NULL;
- fields[1].out_mask = NULL;
fields[1].in_value = xscale->reg_cache->reg_list[XSCALE_DCSR].value;
- fields[1].in_handler = NULL;
- fields[1].in_handler_priv = NULL;
- fields[1].in_check_value = NULL;
- fields[1].in_check_mask = NULL;
- fields[2].device = xscale->jtag_info.chain_pos;
fields[2].num_bits = 1;
fields[2].out_value = &field2;
- fields[2].out_mask = NULL;
- fields[2].in_value = NULL;
- jtag_set_check_value(fields+2, &field2_check_value, &field2_check_mask, NULL);
+ uint8_t tmp2;
+ fields[2].in_value = &tmp2;
- jtag_add_dr_scan(3, fields, -1);
+ jtag_add_dr_scan(target->tap, 3, fields, TAP_DRPAUSE);
- if ((retval = jtag_execute_queue()) != ERROR_OK)
- {
+ jtag_check_value_mask(fields + 0, &field0_check_value, &field0_check_mask);
+ jtag_check_value_mask(fields + 2, &field2_check_value, &field2_check_mask);
+
+ retval = jtag_execute_queue();
+ if (retval != ERROR_OK) {
LOG_ERROR("JTAG error while reading DCSR");
return retval;
}
fields[1].out_value = xscale->reg_cache->reg_list[XSCALE_DCSR].value;
fields[1].in_value = NULL;
- jtag_add_end_state(TAP_RTI);
-
- jtag_add_dr_scan(3, fields, -1);
+ jtag_add_dr_scan(target->tap, 3, fields, TAP_DRPAUSE);
/* DANGER!!! this must be here. It will make sure that the arguments
* to jtag_set_check_value() does not go out of scope! */
return jtag_execute_queue();
}
-int xscale_receive(target_t *target, u32 *buffer, int num_words)
-{
- if (num_words==0)
- return ERROR_INVALID_ARGUMENTS;
- int retval=ERROR_OK;
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
+static void xscale_getbuf(jtag_callback_data_t arg)
+{
+ uint8_t *in = (uint8_t *)arg;
+ *((uint32_t *)arg) = buf_get_u32(in, 0, 32);
+}
- enum tap_state path[3];
- scan_field_t fields[3];
+static int xscale_receive(struct target *target, uint32_t *buffer, int num_words)
+{
+ if (num_words == 0)
+ return ERROR_COMMAND_SYNTAX_ERROR;
- u8 *field0 = malloc(num_words * 1);
- u8 field0_check_value = 0x2;
- u8 field0_check_mask = 0x6;
- u32 *field1 = malloc(num_words * 4);
- u8 field2_check_value = 0x0;
- u8 field2_check_mask = 0x1;
+ struct xscale_common *xscale = target_to_xscale(target);
+ int retval = ERROR_OK;
+ tap_state_t path[3];
+ struct scan_field fields[3];
+ uint8_t *field0 = malloc(num_words * 1);
+ uint8_t field0_check_value = 0x2;
+ uint8_t field0_check_mask = 0x6;
+ uint32_t *field1 = malloc(num_words * 4);
+ uint8_t field2_check_value = 0x0;
+ uint8_t field2_check_mask = 0x1;
int words_done = 0;
int words_scheduled = 0;
-
int i;
- path[0] = TAP_SDS;
- path[1] = TAP_CD;
- path[2] = TAP_SD;
+ path[0] = TAP_DRSELECT;
+ path[1] = TAP_DRCAPTURE;
+ path[2] = TAP_DRSHIFT;
+
+ memset(&fields, 0, sizeof fields);
- fields[0].device = xscale->jtag_info.chain_pos;
fields[0].num_bits = 3;
- fields[0].out_value = NULL;
- fields[0].out_mask = NULL;
- fields[0].in_value = NULL;
- jtag_set_check_value(fields+0, &field0_check_value, &field0_check_mask, NULL);
+ uint8_t tmp;
+ fields[0].in_value = &tmp;
+ fields[0].check_value = &field0_check_value;
+ fields[0].check_mask = &field0_check_mask;
- fields[1].device = xscale->jtag_info.chain_pos;
fields[1].num_bits = 32;
- fields[1].out_value = NULL;
- fields[1].out_mask = NULL;
- fields[1].in_value = NULL;
- fields[1].in_handler = NULL;
- fields[1].in_handler_priv = NULL;
- fields[1].in_check_value = NULL;
- fields[1].in_check_mask = NULL;
-
-
- fields[2].device = xscale->jtag_info.chain_pos;
fields[2].num_bits = 1;
- fields[2].out_value = NULL;
- fields[2].out_mask = NULL;
- fields[2].in_value = NULL;
- jtag_set_check_value(fields+2, &field2_check_value, &field2_check_mask, NULL);
+ uint8_t tmp2;
+ fields[2].in_value = &tmp2;
+ fields[2].check_value = &field2_check_value;
+ fields[2].check_mask = &field2_check_mask;
- jtag_add_end_state(TAP_RTI);
- xscale_jtag_set_instr(xscale->jtag_info.chain_pos, xscale->jtag_info.dbgtx);
- jtag_add_runtest(1, -1); /* ensures that we're in the TAP_RTI state as the above could be a no-op */
+ xscale_jtag_set_instr(target->tap,
+ XSCALE_DBGTX << xscale->xscale_variant,
+ TAP_IDLE);
+ jtag_add_runtest(1, TAP_IDLE); /* ensures that we're in the TAP_IDLE state as the above
+ *could be a no-op */
/* repeat until all words have been collected */
- int attempts=0;
- while (words_done < num_words)
- {
+ int attempts = 0;
+ while (words_done < num_words) {
/* schedule reads */
words_scheduled = 0;
- for (i = words_done; i < num_words; i++)
- {
+ for (i = words_done; i < num_words; i++) {
fields[0].in_value = &field0[i];
- fields[1].in_handler = buf_to_u32_handler;
- fields[1].in_handler_priv = (u8*)&field1[i];
jtag_add_pathmove(3, path);
- jtag_add_dr_scan(3, fields, TAP_RTI);
+
+ fields[1].in_value = (uint8_t *)(field1 + i);
+
+ jtag_add_dr_scan_check(target->tap, 3, fields, TAP_IDLE);
+
+ jtag_add_callback(xscale_getbuf, (jtag_callback_data_t)(field1 + i));
+
words_scheduled++;
}
- if ((retval = jtag_execute_queue()) != ERROR_OK)
- {
+ retval = jtag_execute_queue();
+ if (retval != ERROR_OK) {
LOG_ERROR("JTAG error while receiving data from debug handler");
break;
}
/* examine results */
- for (i = words_done; i < num_words; i++)
- {
- if (!(field0[0] & 1))
- {
+ for (i = words_done; i < num_words; i++) {
+ if (!(field0[i] & 1)) {
/* move backwards if necessary */
int j;
- for (j = i; j < num_words - 1; j++)
- {
- field0[j] = field0[j+1];
- field1[j] = field1[j+1];
+ for (j = i; j < num_words - 1; j++) {
+ field0[j] = field0[j + 1];
+ field1[j] = field1[j + 1];
}
words_scheduled--;
}
}
- if (words_scheduled==0)
- {
- if (attempts++==1000)
- {
- LOG_ERROR("Failed to receiving data from debug handler after 1000 attempts");
- retval=ERROR_TARGET_TIMEOUT;
+ if (words_scheduled == 0) {
+ if (attempts++ == 1000) {
+ LOG_ERROR(
+ "Failed to receiving data from debug handler after 1000 attempts");
+ retval = ERROR_TARGET_TIMEOUT;
break;
}
}
}
for (i = 0; i < num_words; i++)
- *(buffer++) = buf_get_u32((u8*)&field1[i], 0, 32);
+ *(buffer++) = buf_get_u32((uint8_t *)&field1[i], 0, 32);
free(field1);
return retval;
}
-int xscale_read_tx(target_t *target, int consume)
+static int xscale_read_tx(struct target *target, int consume)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
- enum tap_state path[3];
- enum tap_state noconsume_path[6];
-
+ struct xscale_common *xscale = target_to_xscale(target);
+ tap_state_t path[3];
+ tap_state_t noconsume_path[6];
int retval;
struct timeval timeout, now;
+ struct scan_field fields[3];
+ uint8_t field0_in = 0x0;
+ uint8_t field0_check_value = 0x2;
+ uint8_t field0_check_mask = 0x6;
+ uint8_t field2_check_value = 0x0;
+ uint8_t field2_check_mask = 0x1;
+
+ xscale_jtag_set_instr(target->tap,
+ XSCALE_DBGTX << xscale->xscale_variant,
+ TAP_IDLE);
+
+ path[0] = TAP_DRSELECT;
+ path[1] = TAP_DRCAPTURE;
+ path[2] = TAP_DRSHIFT;
+
+ noconsume_path[0] = TAP_DRSELECT;
+ noconsume_path[1] = TAP_DRCAPTURE;
+ noconsume_path[2] = TAP_DREXIT1;
+ noconsume_path[3] = TAP_DRPAUSE;
+ noconsume_path[4] = TAP_DREXIT2;
+ noconsume_path[5] = TAP_DRSHIFT;
+
+ memset(&fields, 0, sizeof fields);
- scan_field_t fields[3];
- u8 field0_in = 0x0;
- u8 field0_check_value = 0x2;
- u8 field0_check_mask = 0x6;
- u8 field2_check_value = 0x0;
- u8 field2_check_mask = 0x1;
-
- jtag_add_end_state(TAP_RTI);
-
- xscale_jtag_set_instr(xscale->jtag_info.chain_pos, xscale->jtag_info.dbgtx);
-
- path[0] = TAP_SDS;
- path[1] = TAP_CD;
- path[2] = TAP_SD;
-
- noconsume_path[0] = TAP_SDS;
- noconsume_path[1] = TAP_CD;
- noconsume_path[2] = TAP_E1D;
- noconsume_path[3] = TAP_PD;
- noconsume_path[4] = TAP_E2D;
- noconsume_path[5] = TAP_SD;
-
- fields[0].device = xscale->jtag_info.chain_pos;
fields[0].num_bits = 3;
- fields[0].out_value = NULL;
- fields[0].out_mask = NULL;
fields[0].in_value = &field0_in;
- jtag_set_check_value(fields+0, &field0_check_value, &field0_check_mask, NULL);
- fields[1].device = xscale->jtag_info.chain_pos;
fields[1].num_bits = 32;
- fields[1].out_value = NULL;
- fields[1].out_mask = NULL;
fields[1].in_value = xscale->reg_cache->reg_list[XSCALE_TX].value;
- fields[1].in_handler = NULL;
- fields[1].in_handler_priv = NULL;
- fields[1].in_check_value = NULL;
- fields[1].in_check_mask = NULL;
-
-
- fields[2].device = xscale->jtag_info.chain_pos;
fields[2].num_bits = 1;
- fields[2].out_value = NULL;
- fields[2].out_mask = NULL;
- fields[2].in_value = NULL;
- jtag_set_check_value(fields+2, &field2_check_value, &field2_check_mask, NULL);
+ uint8_t tmp;
+ fields[2].in_value = &tmp;
gettimeofday(&timeout, NULL);
timeval_add_time(&timeout, 1, 0);
- for (;;)
- {
+ for (;; ) {
/* if we want to consume the register content (i.e. clear TX_READY),
* we have to go straight from Capture-DR to Shift-DR
* otherwise, we go from Capture-DR to Exit1-DR to Pause-DR
if (consume)
jtag_add_pathmove(3, path);
else
- {
- jtag_add_pathmove(sizeof(noconsume_path)/sizeof(*noconsume_path), noconsume_path);
- }
+ jtag_add_pathmove(ARRAY_SIZE(noconsume_path), noconsume_path);
+
+ jtag_add_dr_scan(target->tap, 3, fields, TAP_IDLE);
- jtag_add_dr_scan(3, fields, TAP_RTI);
+ jtag_check_value_mask(fields + 0, &field0_check_value, &field0_check_mask);
+ jtag_check_value_mask(fields + 2, &field2_check_value, &field2_check_mask);
- if ((retval = jtag_execute_queue()) != ERROR_OK)
- {
+ retval = jtag_execute_queue();
+ if (retval != ERROR_OK) {
LOG_ERROR("JTAG error while reading TX");
return ERROR_TARGET_TIMEOUT;
}
gettimeofday(&now, NULL);
- if ((now.tv_sec > timeout.tv_sec) || ((now.tv_sec == timeout.tv_sec)&& (now.tv_usec > timeout.tv_usec)))
- {
+ if ((now.tv_sec > timeout.tv_sec) ||
+ ((now.tv_sec == timeout.tv_sec) && (now.tv_usec > timeout.tv_usec))) {
LOG_ERROR("time out reading TX register");
return ERROR_TARGET_TIMEOUT;
}
if (!((!(field0_in & 1)) && consume))
- {
goto done;
- }
- if (debug_level>=3)
- {
+ if (debug_level >= 3) {
LOG_DEBUG("waiting 100ms");
- alive_sleep(100); /* avoid flooding the logs */
+ alive_sleep(100); /* avoid flooding the logs */
} else
- {
keep_alive();
- }
}
- done:
+done:
if (!(field0_in & 1))
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
return ERROR_OK;
}
-int xscale_write_rx(target_t *target)
+static int xscale_write_rx(struct target *target)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
-
+ struct xscale_common *xscale = target_to_xscale(target);
int retval;
struct timeval timeout, now;
+ struct scan_field fields[3];
+ uint8_t field0_out = 0x0;
+ uint8_t field0_in = 0x0;
+ uint8_t field0_check_value = 0x2;
+ uint8_t field0_check_mask = 0x6;
+ uint8_t field2 = 0x0;
+ uint8_t field2_check_value = 0x0;
+ uint8_t field2_check_mask = 0x1;
- scan_field_t fields[3];
- u8 field0_out = 0x0;
- u8 field0_in = 0x0;
- u8 field0_check_value = 0x2;
- u8 field0_check_mask = 0x6;
- u8 field2 = 0x0;
- u8 field2_check_value = 0x0;
- u8 field2_check_mask = 0x1;
-
- jtag_add_end_state(TAP_RTI);
+ xscale_jtag_set_instr(target->tap,
+ XSCALE_DBGRX << xscale->xscale_variant,
+ TAP_IDLE);
- xscale_jtag_set_instr(xscale->jtag_info.chain_pos, xscale->jtag_info.dbgrx);
+ memset(&fields, 0, sizeof fields);
- fields[0].device = xscale->jtag_info.chain_pos;
fields[0].num_bits = 3;
fields[0].out_value = &field0_out;
- fields[0].out_mask = NULL;
fields[0].in_value = &field0_in;
- jtag_set_check_value(fields+0, &field0_check_value, &field0_check_mask, NULL);
- fields[1].device = xscale->jtag_info.chain_pos;
fields[1].num_bits = 32;
fields[1].out_value = xscale->reg_cache->reg_list[XSCALE_RX].value;
- fields[1].out_mask = NULL;
- fields[1].in_value = NULL;
- fields[1].in_handler = NULL;
- fields[1].in_handler_priv = NULL;
- fields[1].in_check_value = NULL;
- fields[1].in_check_mask = NULL;
-
-
- fields[2].device = xscale->jtag_info.chain_pos;
fields[2].num_bits = 1;
fields[2].out_value = &field2;
- fields[2].out_mask = NULL;
- fields[2].in_value = NULL;
- jtag_set_check_value(fields+2, &field2_check_value, &field2_check_mask, NULL);
+ uint8_t tmp;
+ fields[2].in_value = &tmp;
gettimeofday(&timeout, NULL);
timeval_add_time(&timeout, 1, 0);
/* poll until rx_read is low */
LOG_DEBUG("polling RX");
- for (;;)
- {
- jtag_add_dr_scan(3, fields, TAP_RTI);
+ for (;;) {
+ jtag_add_dr_scan(target->tap, 3, fields, TAP_IDLE);
- if ((retval = jtag_execute_queue()) != ERROR_OK)
- {
+ jtag_check_value_mask(fields + 0, &field0_check_value, &field0_check_mask);
+ jtag_check_value_mask(fields + 2, &field2_check_value, &field2_check_mask);
+
+ retval = jtag_execute_queue();
+ if (retval != ERROR_OK) {
LOG_ERROR("JTAG error while writing RX");
return retval;
}
gettimeofday(&now, NULL);
- if ((now.tv_sec > timeout.tv_sec) || ((now.tv_sec == timeout.tv_sec)&& (now.tv_usec > timeout.tv_usec)))
- {
+ if ((now.tv_sec > timeout.tv_sec) ||
+ ((now.tv_sec == timeout.tv_sec) && (now.tv_usec > timeout.tv_usec))) {
LOG_ERROR("time out writing RX register");
return ERROR_TARGET_TIMEOUT;
}
if (!(field0_in & 1))
goto done;
- if (debug_level>=3)
- {
+ if (debug_level >= 3) {
LOG_DEBUG("waiting 100ms");
- alive_sleep(100); /* avoid flooding the logs */
+ alive_sleep(100); /* avoid flooding the logs */
} else
- {
keep_alive();
- }
}
- done:
+done:
/* set rx_valid */
field2 = 0x1;
- jtag_add_dr_scan(3, fields, TAP_RTI);
+ jtag_add_dr_scan(target->tap, 3, fields, TAP_IDLE);
- if ((retval = jtag_execute_queue()) != ERROR_OK)
- {
+ retval = jtag_execute_queue();
+ if (retval != ERROR_OK) {
LOG_ERROR("JTAG error while writing RX");
return retval;
}
}
/* send count elements of size byte to the debug handler */
-int xscale_send(target_t *target, u8 *buffer, int count, int size)
+static int xscale_send(struct target *target, const uint8_t *buffer, int count, int size)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
- u32 t[3];
- int bits[3];
-
+ struct xscale_common *xscale = target_to_xscale(target);
int retval;
-
int done_count = 0;
- jtag_add_end_state(TAP_RTI);
-
- xscale_jtag_set_instr(xscale->jtag_info.chain_pos, xscale->jtag_info.dbgrx);
+ xscale_jtag_set_instr(target->tap,
+ XSCALE_DBGRX << xscale->xscale_variant,
+ TAP_IDLE);
+
+ static const uint8_t t0;
+ uint8_t t1[4];
+ static const uint8_t t2 = 1;
+ struct scan_field fields[3] = {
+ { .num_bits = 3, .out_value = &t0 },
+ { .num_bits = 32, .out_value = t1 },
+ { .num_bits = 1, .out_value = &t2 },
+ };
- bits[0]=3;
- t[0]=0;
- bits[1]=32;
- t[2]=1;
- bits[2]=1;
int endianness = target->endianness;
- while (done_count++ < count)
- {
- switch (size)
- {
- case 4:
- if (endianness == TARGET_LITTLE_ENDIAN)
- {
- t[1]=le_to_h_u32(buffer);
- } else
- {
- t[1]=be_to_h_u32(buffer);
- }
- break;
- case 2:
- if (endianness == TARGET_LITTLE_ENDIAN)
- {
- t[1]=le_to_h_u16(buffer);
- } else
- {
- t[1]=be_to_h_u16(buffer);
- }
- break;
- case 1:
- t[1]=buffer[0];
- break;
- default:
- LOG_ERROR("BUG: size neither 4, 2 nor 1");
- exit(-1);
+ while (done_count++ < count) {
+ uint32_t t;
+
+ switch (size) {
+ case 4:
+ if (endianness == TARGET_LITTLE_ENDIAN)
+ t = le_to_h_u32(buffer);
+ else
+ t = be_to_h_u32(buffer);
+ break;
+ case 2:
+ if (endianness == TARGET_LITTLE_ENDIAN)
+ t = le_to_h_u16(buffer);
+ else
+ t = be_to_h_u16(buffer);
+ break;
+ case 1:
+ t = buffer[0];
+ break;
+ default:
+ LOG_ERROR("BUG: size neither 4, 2 nor 1");
+ return ERROR_COMMAND_SYNTAX_ERROR;
}
- jtag_add_dr_out(xscale->jtag_info.chain_pos,
- 3,
- bits,
- t,
- TAP_RTI);
+
+ buf_set_u32(t1, 0, 32, t);
+
+ jtag_add_dr_scan(target->tap,
+ 3,
+ fields,
+ TAP_IDLE);
buffer += size;
}
- if ((retval = jtag_execute_queue()) != ERROR_OK)
- {
+ retval = jtag_execute_queue();
+ if (retval != ERROR_OK) {
LOG_ERROR("JTAG error while sending data to debug handler");
return retval;
}
return ERROR_OK;
}
-int xscale_send_u32(target_t *target, u32 value)
+static int xscale_send_u32(struct target *target, uint32_t value)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
+ struct xscale_common *xscale = target_to_xscale(target);
buf_set_u32(xscale->reg_cache->reg_list[XSCALE_RX].value, 0, 32, value);
return xscale_write_rx(target);
}
-int xscale_write_dcsr(target_t *target, int hold_rst, int ext_dbg_brk)
+static int xscale_write_dcsr(struct target *target, int hold_rst, int ext_dbg_brk)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
-
+ struct xscale_common *xscale = target_to_xscale(target);
int retval;
-
- scan_field_t fields[3];
- u8 field0 = 0x0;
- u8 field0_check_value = 0x2;
- u8 field0_check_mask = 0x7;
- u8 field2 = 0x0;
- u8 field2_check_value = 0x0;
- u8 field2_check_mask = 0x1;
+ struct scan_field fields[3];
+ uint8_t field0 = 0x0;
+ uint8_t field0_check_value = 0x2;
+ uint8_t field0_check_mask = 0x7;
+ uint8_t field2 = 0x0;
+ uint8_t field2_check_value = 0x0;
+ uint8_t field2_check_mask = 0x1;
if (hold_rst != -1)
xscale->hold_rst = hold_rst;
if (ext_dbg_brk != -1)
xscale->external_debug_break = ext_dbg_brk;
- jtag_add_end_state(TAP_RTI);
- xscale_jtag_set_instr(xscale->jtag_info.chain_pos, xscale->jtag_info.dcsr);
+ xscale_jtag_set_instr(target->tap,
+ XSCALE_SELDCSR << xscale->xscale_variant,
+ TAP_IDLE);
buf_set_u32(&field0, 1, 1, xscale->hold_rst);
buf_set_u32(&field0, 2, 1, xscale->external_debug_break);
- fields[0].device = xscale->jtag_info.chain_pos;
+ memset(&fields, 0, sizeof fields);
+
fields[0].num_bits = 3;
fields[0].out_value = &field0;
- fields[0].out_mask = NULL;
- fields[0].in_value = NULL;
- jtag_set_check_value(fields+0, &field0_check_value, &field0_check_mask, NULL);
+ uint8_t tmp;
+ fields[0].in_value = &tmp;
- fields[1].device = xscale->jtag_info.chain_pos;
fields[1].num_bits = 32;
fields[1].out_value = xscale->reg_cache->reg_list[XSCALE_DCSR].value;
- fields[1].out_mask = NULL;
- fields[1].in_value = NULL;
- fields[1].in_handler = NULL;
- fields[1].in_handler_priv = NULL;
- fields[1].in_check_value = NULL;
- fields[1].in_check_mask = NULL;
-
-
- fields[2].device = xscale->jtag_info.chain_pos;
fields[2].num_bits = 1;
fields[2].out_value = &field2;
- fields[2].out_mask = NULL;
- fields[2].in_value = NULL;
- jtag_set_check_value(fields+2, &field2_check_value, &field2_check_mask, NULL);
+ uint8_t tmp2;
+ fields[2].in_value = &tmp2;
- jtag_add_dr_scan(3, fields, -1);
+ jtag_add_dr_scan(target->tap, 3, fields, TAP_IDLE);
- if ((retval = jtag_execute_queue()) != ERROR_OK)
- {
+ jtag_check_value_mask(fields + 0, &field0_check_value, &field0_check_mask);
+ jtag_check_value_mask(fields + 2, &field2_check_value, &field2_check_mask);
+
+ retval = jtag_execute_queue();
+ if (retval != ERROR_OK) {
LOG_ERROR("JTAG error while writing DCSR");
return retval;
}
}
/* parity of the number of bits 0 if even; 1 if odd. for 32 bit words */
-unsigned int parity (unsigned int v)
+static unsigned int parity(unsigned int v)
{
- unsigned int ov = v;
+ /* unsigned int ov = v; */
v ^= v >> 16;
v ^= v >> 8;
v ^= v >> 4;
v &= 0xf;
- LOG_DEBUG("parity of 0x%x is %i", ov, (0x6996 >> v) & 1);
+ /* LOG_DEBUG("parity of 0x%x is %i", ov, (0x6996 >> v) & 1); */
return (0x6996 >> v) & 1;
}
-int xscale_load_ic(target_t *target, int mini, u32 va, u32 buffer[8])
+static int xscale_load_ic(struct target *target, uint32_t va, uint32_t buffer[8])
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
- u8 packet[4];
- u8 cmd;
+ struct xscale_common *xscale = target_to_xscale(target);
+ uint8_t packet[4];
+ uint8_t cmd;
int word;
+ struct scan_field fields[2];
- scan_field_t fields[2];
-
- LOG_DEBUG("loading miniIC at 0x%8.8x", va);
-
- jtag_add_end_state(TAP_RTI);
- xscale_jtag_set_instr(xscale->jtag_info.chain_pos, xscale->jtag_info.ldic); /* LDIC */
+ LOG_DEBUG("loading miniIC at 0x%8.8" PRIx32 "", va);
- /* CMD is b010 for Main IC and b011 for Mini IC */
- if (mini)
- buf_set_u32(&cmd, 0, 3, 0x3);
- else
- buf_set_u32(&cmd, 0, 3, 0x2);
+ /* LDIC into IR */
+ xscale_jtag_set_instr(target->tap,
+ XSCALE_LDIC << xscale->xscale_variant,
+ TAP_IDLE);
- buf_set_u32(&cmd, 3, 3, 0x0);
+ /* CMD is b011 to load a cacheline into the Mini ICache.
+ * Loading into the main ICache is deprecated, and unused.
+ * It's followed by three zero bits, and 27 address bits.
+ */
+ buf_set_u32(&cmd, 0, 6, 0x3);
/* virtual address of desired cache line */
buf_set_u32(packet, 0, 27, va >> 5);
- fields[0].device = xscale->jtag_info.chain_pos;
+ memset(&fields, 0, sizeof fields);
+
fields[0].num_bits = 6;
fields[0].out_value = &cmd;
- fields[0].out_mask = NULL;
- fields[0].in_value = NULL;
- fields[0].in_check_value = NULL;
- fields[0].in_check_mask = NULL;
- fields[0].in_handler = NULL;
- fields[0].in_handler_priv = NULL;
-
- fields[1].device = xscale->jtag_info.chain_pos;
+
fields[1].num_bits = 27;
fields[1].out_value = packet;
- fields[1].out_mask = NULL;
- fields[1].in_value = NULL;
- fields[1].in_check_value = NULL;
- fields[1].in_check_mask = NULL;
- fields[1].in_handler = NULL;
- fields[1].in_handler_priv = NULL;
- jtag_add_dr_scan(2, fields, -1);
+ jtag_add_dr_scan(target->tap, 2, fields, TAP_IDLE);
+ /* rest of packet is a cacheline: 8 instructions, with parity */
fields[0].num_bits = 32;
fields[0].out_value = packet;
fields[1].num_bits = 1;
fields[1].out_value = &cmd;
- for (word = 0; word < 8; word++)
- {
+ for (word = 0; word < 8; word++) {
buf_set_u32(packet, 0, 32, buffer[word]);
- cmd = parity(*((u32*)packet));
- jtag_add_dr_scan(2, fields, -1);
- }
- jtag_execute_queue();
+ uint32_t value;
+ memcpy(&value, packet, sizeof(uint32_t));
+ cmd = parity(value);
- return ERROR_OK;
+ jtag_add_dr_scan(target->tap, 2, fields, TAP_IDLE);
+ }
+
+ return jtag_execute_queue();
}
-int xscale_invalidate_ic_line(target_t *target, u32 va)
+static int xscale_invalidate_ic_line(struct target *target, uint32_t va)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
- u8 packet[4];
- u8 cmd;
+ struct xscale_common *xscale = target_to_xscale(target);
+ uint8_t packet[4];
+ uint8_t cmd;
+ struct scan_field fields[2];
- scan_field_t fields[2];
-
- jtag_add_end_state(TAP_RTI);
- xscale_jtag_set_instr(xscale->jtag_info.chain_pos, xscale->jtag_info.ldic); /* LDIC */
+ xscale_jtag_set_instr(target->tap,
+ XSCALE_LDIC << xscale->xscale_variant,
+ TAP_IDLE);
/* CMD for invalidate IC line b000, bits [6:4] b000 */
buf_set_u32(&cmd, 0, 6, 0x0);
/* virtual address of desired cache line */
buf_set_u32(packet, 0, 27, va >> 5);
- fields[0].device = xscale->jtag_info.chain_pos;
+ memset(&fields, 0, sizeof fields);
+
fields[0].num_bits = 6;
fields[0].out_value = &cmd;
- fields[0].out_mask = NULL;
- fields[0].in_value = NULL;
- fields[0].in_check_value = NULL;
- fields[0].in_check_mask = NULL;
- fields[0].in_handler = NULL;
- fields[0].in_handler_priv = NULL;
-
- fields[1].device = xscale->jtag_info.chain_pos;
+
fields[1].num_bits = 27;
fields[1].out_value = packet;
- fields[1].out_mask = NULL;
- fields[1].in_value = NULL;
- fields[1].in_check_value = NULL;
- fields[1].in_check_mask = NULL;
- fields[1].in_handler = NULL;
- fields[1].in_handler_priv = NULL;
- jtag_add_dr_scan(2, fields, -1);
+ jtag_add_dr_scan(target->tap, 2, fields, TAP_IDLE);
return ERROR_OK;
}
-int xscale_update_vectors(target_t *target)
+static int xscale_update_vectors(struct target *target)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
+ struct xscale_common *xscale = target_to_xscale(target);
int i;
int retval;
- u32 low_reset_branch, high_reset_branch;
+ uint32_t low_reset_branch, high_reset_branch;
- for (i = 1; i < 8; i++)
- {
+ for (i = 1; i < 8; i++) {
/* if there's a static vector specified for this exception, override */
if (xscale->static_high_vectors_set & (1 << i))
- {
xscale->high_vectors[i] = xscale->static_high_vectors[i];
- }
- else
- {
- retval=target_read_u32(target, 0xffff0000 + 4*i, &xscale->high_vectors[i]);
+ else {
+ retval = target_read_u32(target, 0xffff0000 + 4*i, &xscale->high_vectors[i]);
if (retval == ERROR_TARGET_TIMEOUT)
return retval;
- if (retval!=ERROR_OK)
- {
+ if (retval != ERROR_OK) {
/* Some of these reads will fail as part of normal execution */
xscale->high_vectors[i] = ARMV4_5_B(0xfffffe, 0);
}
}
}
- for (i = 1; i < 8; i++)
- {
+ for (i = 1; i < 8; i++) {
if (xscale->static_low_vectors_set & (1 << i))
- {
xscale->low_vectors[i] = xscale->static_low_vectors[i];
- }
- else
- {
- retval=target_read_u32(target, 0x0 + 4*i, &xscale->low_vectors[i]);
+ else {
+ retval = target_read_u32(target, 0x0 + 4*i, &xscale->low_vectors[i]);
if (retval == ERROR_TARGET_TIMEOUT)
return retval;
- if (retval!=ERROR_OK)
- {
+ if (retval != ERROR_OK) {
/* Some of these reads will fail as part of normal execution */
xscale->low_vectors[i] = ARMV4_5_B(0xfffffe, 0);
}
xscale_invalidate_ic_line(target, 0x0);
xscale_invalidate_ic_line(target, 0xffff0000);
- xscale_load_ic(target, 1, 0x0, xscale->low_vectors);
- xscale_load_ic(target, 1, 0xffff0000, xscale->high_vectors);
+ xscale_load_ic(target, 0x0, xscale->low_vectors);
+ xscale_load_ic(target, 0xffff0000, xscale->high_vectors);
return ERROR_OK;
}
-int xscale_arch_state(struct target_s *target)
+static int xscale_arch_state(struct target *target)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
+ struct xscale_common *xscale = target_to_xscale(target);
+ struct arm *arm = &xscale->arm;
- char *state[] =
- {
+ static const char *state[] = {
"disabled", "enabled"
};
- char *arch_dbg_reason[] =
- {
+ static const char *arch_dbg_reason[] = {
"", "\n(processor reset)", "\n(trace buffer full)"
};
- if (armv4_5->common_magic != ARMV4_5_COMMON_MAGIC)
- {
+ if (arm->common_magic != ARM_COMMON_MAGIC) {
LOG_ERROR("BUG: called for a non-ARMv4/5 target");
- exit(-1);
+ return ERROR_COMMAND_SYNTAX_ERROR;
}
- LOG_USER("target halted in %s state due to %s, current mode: %s\n"
- "cpsr: 0x%8.8x pc: 0x%8.8x\n"
- "MMU: %s, D-Cache: %s, I-Cache: %s"
- "%s",
- armv4_5_state_strings[armv4_5->core_state],
- Jim_Nvp_value2name_simple( nvp_target_debug_reason, target->debug_reason )->name ,
- armv4_5_mode_strings[armv4_5_mode_to_number(armv4_5->core_mode)],
- buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 32),
- buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32),
- state[xscale->armv4_5_mmu.mmu_enabled],
- state[xscale->armv4_5_mmu.armv4_5_cache.d_u_cache_enabled],
- state[xscale->armv4_5_mmu.armv4_5_cache.i_cache_enabled],
- arch_dbg_reason[xscale->arch_debug_reason]);
+ arm_arch_state(target);
+ LOG_USER("MMU: %s, D-Cache: %s, I-Cache: %s%s",
+ state[xscale->armv4_5_mmu.mmu_enabled],
+ state[xscale->armv4_5_mmu.armv4_5_cache.d_u_cache_enabled],
+ state[xscale->armv4_5_mmu.armv4_5_cache.i_cache_enabled],
+ arch_dbg_reason[xscale->arch_debug_reason]);
return ERROR_OK;
}
-int xscale_poll(target_t *target)
+static int xscale_poll(struct target *target)
{
- int retval=ERROR_OK;
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
+ int retval = ERROR_OK;
- if ((target->state == TARGET_RUNNING) || (target->state == TARGET_DEBUG_RUNNING))
- {
+ if ((target->state == TARGET_RUNNING) || (target->state == TARGET_DEBUG_RUNNING)) {
enum target_state previous_state = target->state;
- if ((retval = xscale_read_tx(target, 0)) == ERROR_OK)
- {
+ retval = xscale_read_tx(target, 0);
+ if (retval == ERROR_OK) {
/* there's data to read from the tx register, we entered debug state */
- xscale->handler_running = 1;
-
target->state = TARGET_HALTED;
/* process debug entry, fetching current mode regs */
retval = xscale_debug_entry(target);
- }
- else if (retval != ERROR_TARGET_RESOURCE_NOT_AVAILABLE)
- {
+ } else if (retval != ERROR_TARGET_RESOURCE_NOT_AVAILABLE) {
LOG_USER("error while polling TX register, reset CPU");
/* here we "lie" so GDB won't get stuck and a reset can be perfomed */
target->state = TARGET_HALTED;
return retval;
}
-int xscale_debug_entry(target_t *target)
+static int xscale_debug_entry(struct target *target)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
- u32 pc;
- u32 buffer[10];
- int i;
+ struct xscale_common *xscale = target_to_xscale(target);
+ struct arm *arm = &xscale->arm;
+ uint32_t pc;
+ uint32_t buffer[10];
+ unsigned i;
int retval;
-
- u32 moe;
+ uint32_t moe;
/* clear external dbg break (will be written on next DCSR read) */
xscale->external_debug_break = 0;
- if ((retval=xscale_read_dcsr(target))!=ERROR_OK)
+ retval = xscale_read_dcsr(target);
+ if (retval != ERROR_OK)
return retval;
/* get r0, pc, r1 to r7 and cpsr */
- if ((retval=xscale_receive(target, buffer, 10))!=ERROR_OK)
+ retval = xscale_receive(target, buffer, 10);
+ if (retval != ERROR_OK)
return retval;
/* move r0 from buffer to register cache */
- buf_set_u32(armv4_5->core_cache->reg_list[0].value, 0, 32, buffer[0]);
- armv4_5->core_cache->reg_list[15].dirty = 1;
- armv4_5->core_cache->reg_list[15].valid = 1;
- LOG_DEBUG("r0: 0x%8.8x", buffer[0]);
+ buf_set_u32(arm->core_cache->reg_list[0].value, 0, 32, buffer[0]);
+ arm->core_cache->reg_list[0].dirty = 1;
+ arm->core_cache->reg_list[0].valid = 1;
+ LOG_DEBUG("r0: 0x%8.8" PRIx32 "", buffer[0]);
/* move pc from buffer to register cache */
- buf_set_u32(armv4_5->core_cache->reg_list[15].value, 0, 32, buffer[1]);
- armv4_5->core_cache->reg_list[15].dirty = 1;
- armv4_5->core_cache->reg_list[15].valid = 1;
- LOG_DEBUG("pc: 0x%8.8x", buffer[1]);
+ buf_set_u32(arm->pc->value, 0, 32, buffer[1]);
+ arm->pc->dirty = 1;
+ arm->pc->valid = 1;
+ LOG_DEBUG("pc: 0x%8.8" PRIx32 "", buffer[1]);
/* move data from buffer to register cache */
- for (i = 1; i <= 7; i++)
- {
- buf_set_u32(armv4_5->core_cache->reg_list[i].value, 0, 32, buffer[1 + i]);
- armv4_5->core_cache->reg_list[i].dirty = 1;
- armv4_5->core_cache->reg_list[i].valid = 1;
- LOG_DEBUG("r%i: 0x%8.8x", i, buffer[i + 1]);
+ for (i = 1; i <= 7; i++) {
+ buf_set_u32(arm->core_cache->reg_list[i].value, 0, 32, buffer[1 + i]);
+ arm->core_cache->reg_list[i].dirty = 1;
+ arm->core_cache->reg_list[i].valid = 1;
+ LOG_DEBUG("r%i: 0x%8.8" PRIx32 "", i, buffer[i + 1]);
}
- buf_set_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 32, buffer[9]);
- armv4_5->core_cache->reg_list[ARMV4_5_CPSR].dirty = 1;
- armv4_5->core_cache->reg_list[ARMV4_5_CPSR].valid = 1;
- LOG_DEBUG("cpsr: 0x%8.8x", buffer[9]);
+ arm_set_cpsr(arm, buffer[9]);
+ LOG_DEBUG("cpsr: 0x%8.8" PRIx32 "", buffer[9]);
- armv4_5->core_mode = buffer[9] & 0x1f;
- if (armv4_5_mode_to_number(armv4_5->core_mode) == -1)
- {
+ if (!is_arm_mode(arm->core_mode)) {
target->state = TARGET_UNKNOWN;
LOG_ERROR("cpsr contains invalid mode value - communication failure");
return ERROR_TARGET_FAILURE;
}
- LOG_DEBUG("target entered debug state in %s mode", armv4_5_mode_strings[armv4_5_mode_to_number(armv4_5->core_mode)]);
-
- if (buffer[9] & 0x20)
- armv4_5->core_state = ARMV4_5_STATE_THUMB;
- else
- armv4_5->core_state = ARMV4_5_STATE_ARM;
-
-
- if (armv4_5_mode_to_number(armv4_5->core_mode)==-1)
- return ERROR_FAIL;
+ LOG_DEBUG("target entered debug state in %s mode",
+ arm_mode_name(arm->core_mode));
/* get banked registers, r8 to r14, and spsr if not in USR/SYS mode */
- if ((armv4_5->core_mode != ARMV4_5_MODE_USR) && (armv4_5->core_mode != ARMV4_5_MODE_SYS))
- {
+ if (arm->spsr) {
xscale_receive(target, buffer, 8);
- buf_set_u32(ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 16).value, 0, 32, buffer[7]);
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 16).dirty = 0;
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 16).valid = 1;
- }
- else
- {
+ buf_set_u32(arm->spsr->value, 0, 32, buffer[7]);
+ arm->spsr->dirty = false;
+ arm->spsr->valid = true;
+ } else {
/* r8 to r14, but no spsr */
xscale_receive(target, buffer, 7);
}
- /* move data from buffer to register cache */
- for (i = 8; i <= 14; i++)
- {
- buf_set_u32(ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, i).value, 0, 32, buffer[i - 8]);
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, i).dirty = 0;
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, i).valid = 1;
+ /* move data from buffer to right banked register in cache */
+ for (i = 8; i <= 14; i++) {
+ struct reg *r = arm_reg_current(arm, i);
+
+ buf_set_u32(r->value, 0, 32, buffer[i - 8]);
+ r->dirty = false;
+ r->valid = true;
}
+ /* mark xscale regs invalid to ensure they are retrieved from the
+ * debug handler if requested */
+ for (i = 0; i < xscale->reg_cache->num_regs; i++)
+ xscale->reg_cache->reg_list[i].valid = 0;
+
/* examine debug reason */
xscale_read_dcsr(target);
moe = buf_get_u32(xscale->reg_cache->reg_list[XSCALE_DCSR].value, 2, 3);
/* stored PC (for calculating fixup) */
- pc = buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32);
+ pc = buf_get_u32(arm->pc->value, 0, 32);
- switch (moe)
- {
- case 0x0: /* Processor reset */
+ switch (moe) {
+ case 0x0: /* Processor reset */
target->debug_reason = DBG_REASON_DBGRQ;
xscale->arch_debug_reason = XSCALE_DBG_REASON_RESET;
pc -= 4;
break;
- case 0x1: /* Instruction breakpoint hit */
+ case 0x1: /* Instruction breakpoint hit */
target->debug_reason = DBG_REASON_BREAKPOINT;
xscale->arch_debug_reason = XSCALE_DBG_REASON_GENERIC;
pc -= 4;
break;
- case 0x2: /* Data breakpoint hit */
+ case 0x2: /* Data breakpoint hit */
target->debug_reason = DBG_REASON_WATCHPOINT;
xscale->arch_debug_reason = XSCALE_DBG_REASON_GENERIC;
pc -= 4;
break;
- case 0x3: /* BKPT instruction executed */
+ case 0x3: /* BKPT instruction executed */
target->debug_reason = DBG_REASON_BREAKPOINT;
xscale->arch_debug_reason = XSCALE_DBG_REASON_GENERIC;
pc -= 4;
break;
- case 0x4: /* Ext. debug event */
+ case 0x4: /* Ext. debug event */
target->debug_reason = DBG_REASON_DBGRQ;
xscale->arch_debug_reason = XSCALE_DBG_REASON_GENERIC;
pc -= 4;
break;
- case 0x5: /* Vector trap occured */
+ case 0x5: /* Vector trap occured */
target->debug_reason = DBG_REASON_BREAKPOINT;
xscale->arch_debug_reason = XSCALE_DBG_REASON_GENERIC;
pc -= 4;
break;
- case 0x6: /* Trace buffer full break */
+ case 0x6: /* Trace buffer full break */
target->debug_reason = DBG_REASON_DBGRQ;
xscale->arch_debug_reason = XSCALE_DBG_REASON_TB_FULL;
pc -= 4;
break;
- case 0x7: /* Reserved */
+ case 0x7: /* Reserved (may flag Hot-Debug support) */
default:
LOG_ERROR("Method of Entry is 'Reserved'");
exit(-1);
}
/* apply PC fixup */
- buf_set_u32(armv4_5->core_cache->reg_list[15].value, 0, 32, pc);
+ buf_set_u32(arm->pc->value, 0, 32, pc);
/* on the first debug entry, identify cache type */
- if (xscale->armv4_5_mmu.armv4_5_cache.ctype == -1)
- {
- u32 cache_type_reg;
+ if (xscale->armv4_5_mmu.armv4_5_cache.ctype == -1) {
+ uint32_t cache_type_reg;
/* read cp15 cache type register */
xscale_get_reg(&xscale->reg_cache->reg_list[XSCALE_CACHETYPE]);
- cache_type_reg = buf_get_u32(xscale->reg_cache->reg_list[XSCALE_CACHETYPE].value, 0, 32);
+ cache_type_reg = buf_get_u32(xscale->reg_cache->reg_list[XSCALE_CACHETYPE].value,
+ 0,
+ 32);
armv4_5_identify_cache(cache_type_reg, &xscale->armv4_5_mmu.armv4_5_cache);
}
- /* examine MMU and Cache settings */
- /* read cp15 control register */
+ /* examine MMU and Cache settings
+ * read cp15 control register */
xscale_get_reg(&xscale->reg_cache->reg_list[XSCALE_CTRL]);
- xscale->cp15_control_reg = buf_get_u32(xscale->reg_cache->reg_list[XSCALE_CTRL].value, 0, 32);
+ xscale->cp15_control_reg =
+ buf_get_u32(xscale->reg_cache->reg_list[XSCALE_CTRL].value, 0, 32);
xscale->armv4_5_mmu.mmu_enabled = (xscale->cp15_control_reg & 0x1U) ? 1 : 0;
- xscale->armv4_5_mmu.armv4_5_cache.d_u_cache_enabled = (xscale->cp15_control_reg & 0x4U) ? 1 : 0;
- xscale->armv4_5_mmu.armv4_5_cache.i_cache_enabled = (xscale->cp15_control_reg & 0x1000U) ? 1 : 0;
+ xscale->armv4_5_mmu.armv4_5_cache.d_u_cache_enabled =
+ (xscale->cp15_control_reg & 0x4U) ? 1 : 0;
+ xscale->armv4_5_mmu.armv4_5_cache.i_cache_enabled =
+ (xscale->cp15_control_reg & 0x1000U) ? 1 : 0;
/* tracing enabled, read collected trace data */
- if (xscale->trace.buffer_enabled)
- {
+ if (xscale->trace.mode != XSCALE_TRACE_DISABLED) {
xscale_read_trace(target);
- xscale->trace.buffer_fill--;
- /* resume if we're still collecting trace data */
- if ((xscale->arch_debug_reason == XSCALE_DBG_REASON_TB_FULL)
- && (xscale->trace.buffer_fill > 0))
- {
- xscale_resume(target, 1, 0x0, 1, 0);
- }
- else
- {
- xscale->trace.buffer_enabled = 0;
- }
+ /* Resume if entered debug due to buffer fill and we're still collecting
+ * trace data. Note that a debug exception due to trace buffer full
+ * can only happen in fill mode. */
+ if (xscale->arch_debug_reason == XSCALE_DBG_REASON_TB_FULL) {
+ if (--xscale->trace.fill_counter > 0)
+ xscale_resume(target, 1, 0x0, 1, 0);
+ } else /* entered debug for other reason; reset counter */
+ xscale->trace.fill_counter = 0;
}
return ERROR_OK;
}
-int xscale_halt(target_t *target)
+static int xscale_halt(struct target *target)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
+ struct xscale_common *xscale = target_to_xscale(target);
LOG_DEBUG("target->state: %s",
- Jim_Nvp_value2name_simple( nvp_target_state, target->state )->name);
+ target_state_name(target));
- if (target->state == TARGET_HALTED)
- {
+ if (target->state == TARGET_HALTED) {
LOG_DEBUG("target was already halted");
return ERROR_OK;
- }
- else if (target->state == TARGET_UNKNOWN)
- {
+ } else if (target->state == TARGET_UNKNOWN) {
/* this must not happen for a xscale target */
LOG_ERROR("target was in unknown state when halt was requested");
return ERROR_TARGET_INVALID;
- }
- else if (target->state == TARGET_RESET)
- {
+ } else if (target->state == TARGET_RESET)
LOG_DEBUG("target->state == TARGET_RESET");
- }
- else
- {
+ else {
/* assert external dbg break */
xscale->external_debug_break = 1;
xscale_read_dcsr(target);
return ERROR_OK;
}
-int xscale_enable_single_step(struct target_s *target, u32 next_pc)
+static int xscale_enable_single_step(struct target *target, uint32_t next_pc)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale= armv4_5->arch_info;
- reg_t *ibcr0 = &xscale->reg_cache->reg_list[XSCALE_IBCR0];
+ struct xscale_common *xscale = target_to_xscale(target);
+ struct reg *ibcr0 = &xscale->reg_cache->reg_list[XSCALE_IBCR0];
int retval;
- if (xscale->ibcr0_used)
- {
- breakpoint_t *ibcr0_bp = breakpoint_find(target, buf_get_u32(ibcr0->value, 0, 32) & 0xfffffffe);
+ if (xscale->ibcr0_used) {
+ struct breakpoint *ibcr0_bp =
+ breakpoint_find(target, buf_get_u32(ibcr0->value, 0, 32) & 0xfffffffe);
if (ibcr0_bp)
- {
xscale_unset_breakpoint(target, ibcr0_bp);
- }
- else
- {
- LOG_ERROR("BUG: xscale->ibcr0_used is set, but no breakpoint with that address found");
+ else {
+ LOG_ERROR(
+ "BUG: xscale->ibcr0_used is set, but no breakpoint with that address found");
exit(-1);
}
}
- if ((retval=xscale_set_reg_u32(ibcr0, next_pc | 0x1))!=ERROR_OK)
+ retval = xscale_set_reg_u32(ibcr0, next_pc | 0x1);
+ if (retval != ERROR_OK)
return retval;
return ERROR_OK;
}
-int xscale_disable_single_step(struct target_s *target)
+static int xscale_disable_single_step(struct target *target)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale= armv4_5->arch_info;
- reg_t *ibcr0 = &xscale->reg_cache->reg_list[XSCALE_IBCR0];
+ struct xscale_common *xscale = target_to_xscale(target);
+ struct reg *ibcr0 = &xscale->reg_cache->reg_list[XSCALE_IBCR0];
int retval;
- if ((retval=xscale_set_reg_u32(ibcr0, 0x0))!=ERROR_OK)
+ retval = xscale_set_reg_u32(ibcr0, 0x0);
+ if (retval != ERROR_OK)
return retval;
return ERROR_OK;
}
-int xscale_resume(struct target_s *target, int current, u32 address, int handle_breakpoints, int debug_execution)
+static void xscale_enable_watchpoints(struct target *target)
+{
+ struct watchpoint *watchpoint = target->watchpoints;
+
+ while (watchpoint) {
+ if (watchpoint->set == 0)
+ xscale_set_watchpoint(target, watchpoint);
+ watchpoint = watchpoint->next;
+ }
+}
+
+static void xscale_enable_breakpoints(struct target *target)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale= armv4_5->arch_info;
- breakpoint_t *breakpoint = target->breakpoints;
+ struct breakpoint *breakpoint = target->breakpoints;
+
+ /* set any pending breakpoints */
+ while (breakpoint) {
+ if (breakpoint->set == 0)
+ xscale_set_breakpoint(target, breakpoint);
+ breakpoint = breakpoint->next;
+ }
+}
- u32 current_pc;
+static void xscale_free_trace_data(struct xscale_common *xscale)
+{
+ struct xscale_trace_data *td = xscale->trace.data;
+ while (td) {
+ struct xscale_trace_data *next_td = td->next;
+ if (td->entries)
+ free(td->entries);
+ free(td);
+ td = next_td;
+ }
+ xscale->trace.data = NULL;
+}
+static int xscale_resume(struct target *target, int current,
+ uint32_t address, int handle_breakpoints, int debug_execution)
+{
+ struct xscale_common *xscale = target_to_xscale(target);
+ struct arm *arm = &xscale->arm;
+ uint32_t current_pc;
int retval;
int i;
LOG_DEBUG("-");
- if (target->state != TARGET_HALTED)
- {
+ if (target->state != TARGET_HALTED) {
LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
if (!debug_execution)
- {
target_free_all_working_areas(target);
- }
/* update vector tables */
- if ((retval=xscale_update_vectors(target))!=ERROR_OK)
+ retval = xscale_update_vectors(target);
+ if (retval != ERROR_OK)
return retval;
/* current = 1: continue on current pc, otherwise continue at <address> */
if (!current)
- buf_set_u32(armv4_5->core_cache->reg_list[15].value, 0, 32, address);
+ buf_set_u32(arm->pc->value, 0, 32, address);
- current_pc = buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32);
+ current_pc = buf_get_u32(arm->pc->value, 0, 32);
/* if we're at the reset vector, we have to simulate the branch */
- if (current_pc == 0x0)
- {
+ if (current_pc == 0x0) {
arm_simulate_step(target, NULL);
- current_pc = buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32);
+ current_pc = buf_get_u32(arm->pc->value, 0, 32);
}
/* the front-end may request us not to handle breakpoints */
- if (handle_breakpoints)
- {
- if ((breakpoint = breakpoint_find(target, buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32))))
- {
- u32 next_pc;
+ if (handle_breakpoints) {
+ struct breakpoint *breakpoint;
+ breakpoint = breakpoint_find(target,
+ buf_get_u32(arm->pc->value, 0, 32));
+ if (breakpoint != NULL) {
+ uint32_t next_pc;
+ enum trace_mode saved_trace_mode;
/* there's a breakpoint at the current PC, we have to step over it */
- LOG_DEBUG("unset breakpoint at 0x%8.8x", breakpoint->address);
+ LOG_DEBUG("unset breakpoint at 0x%8.8" PRIx32 "", breakpoint->address);
xscale_unset_breakpoint(target, breakpoint);
/* calculate PC of next instruction */
- if ((retval = arm_simulate_step(target, &next_pc)) != ERROR_OK)
- {
- u32 current_opcode;
+ retval = arm_simulate_step(target, &next_pc);
+ if (retval != ERROR_OK) {
+ uint32_t current_opcode;
target_read_u32(target, current_pc, ¤t_opcode);
- LOG_ERROR("BUG: couldn't calculate PC of next instruction, current opcode was 0x%8.8x", current_opcode);
+ LOG_ERROR(
+ "BUG: couldn't calculate PC of next instruction, current opcode was 0x%8.8" PRIx32 "",
+ current_opcode);
}
LOG_DEBUG("enable single-step");
xscale_enable_single_step(target, next_pc);
/* restore banked registers */
- xscale_restore_context(target);
-
- /* send resume request (command 0x30 or 0x31)
- * clean the trace buffer if it is to be enabled (0x62) */
- if (xscale->trace.buffer_enabled)
- {
- xscale_send_u32(target, 0x62);
- xscale_send_u32(target, 0x31);
- }
- else
- xscale_send_u32(target, 0x30);
+ retval = xscale_restore_banked(target);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* send resume request */
+ xscale_send_u32(target, 0x30);
/* send CPSR */
- xscale_send_u32(target, buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 32));
- LOG_DEBUG("writing cpsr with value 0x%8.8x", buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 32));
+ xscale_send_u32(target,
+ buf_get_u32(arm->cpsr->value, 0, 32));
+ LOG_DEBUG("writing cpsr with value 0x%8.8" PRIx32,
+ buf_get_u32(arm->cpsr->value, 0, 32));
- for (i = 7; i >= 0; i--)
- {
+ for (i = 7; i >= 0; i--) {
/* send register */
- xscale_send_u32(target, buf_get_u32(armv4_5->core_cache->reg_list[i].value, 0, 32));
- LOG_DEBUG("writing r%i with value 0x%8.8x", i, buf_get_u32(armv4_5->core_cache->reg_list[i].value, 0, 32));
+ xscale_send_u32(target,
+ buf_get_u32(arm->core_cache->reg_list[i].value, 0, 32));
+ LOG_DEBUG("writing r%i with value 0x%8.8" PRIx32 "",
+ i, buf_get_u32(arm->core_cache->reg_list[i].value, 0, 32));
}
/* send PC */
- xscale_send_u32(target, buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32));
- LOG_DEBUG("writing PC with value 0x%8.8x", buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32));
+ xscale_send_u32(target,
+ buf_get_u32(arm->pc->value, 0, 32));
+ LOG_DEBUG("writing PC with value 0x%8.8" PRIx32,
+ buf_get_u32(arm->pc->value, 0, 32));
+
+ /* disable trace data collection in xscale_debug_entry() */
+ saved_trace_mode = xscale->trace.mode;
+ xscale->trace.mode = XSCALE_TRACE_DISABLED;
/* wait for and process debug entry */
xscale_debug_entry(target);
+ /* re-enable trace buffer, if enabled previously */
+ xscale->trace.mode = saved_trace_mode;
+
LOG_DEBUG("disable single-step");
xscale_disable_single_step(target);
- LOG_DEBUG("set breakpoint at 0x%8.8x", breakpoint->address);
+ LOG_DEBUG("set breakpoint at 0x%8.8" PRIx32 "", breakpoint->address);
xscale_set_breakpoint(target, breakpoint);
}
}
xscale_enable_watchpoints(target);
/* restore banked registers */
- xscale_restore_context(target);
+ retval = xscale_restore_banked(target);
+ if (retval != ERROR_OK)
+ return retval;
/* send resume request (command 0x30 or 0x31)
* clean the trace buffer if it is to be enabled (0x62) */
- if (xscale->trace.buffer_enabled)
- {
+ if (xscale->trace.mode != XSCALE_TRACE_DISABLED) {
+ if (xscale->trace.mode == XSCALE_TRACE_FILL) {
+ /* If trace enabled in fill mode and starting collection of new set
+ * of buffers, initialize buffer counter and free previous buffers */
+ if (xscale->trace.fill_counter == 0) {
+ xscale->trace.fill_counter = xscale->trace.buffer_fill;
+ xscale_free_trace_data(xscale);
+ }
+ } else /* wrap mode; free previous buffer */
+ xscale_free_trace_data(xscale);
+
xscale_send_u32(target, 0x62);
xscale_send_u32(target, 0x31);
- }
- else
+ } else
xscale_send_u32(target, 0x30);
/* send CPSR */
- xscale_send_u32(target, buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 32));
- LOG_DEBUG("writing cpsr with value 0x%8.8x", buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 32));
+ xscale_send_u32(target, buf_get_u32(arm->cpsr->value, 0, 32));
+ LOG_DEBUG("writing cpsr with value 0x%8.8" PRIx32,
+ buf_get_u32(arm->cpsr->value, 0, 32));
- for (i = 7; i >= 0; i--)
- {
+ for (i = 7; i >= 0; i--) {
/* send register */
- xscale_send_u32(target, buf_get_u32(armv4_5->core_cache->reg_list[i].value, 0, 32));
- LOG_DEBUG("writing r%i with value 0x%8.8x", i, buf_get_u32(armv4_5->core_cache->reg_list[i].value, 0, 32));
+ xscale_send_u32(target, buf_get_u32(arm->core_cache->reg_list[i].value, 0, 32));
+ LOG_DEBUG("writing r%i with value 0x%8.8" PRIx32 "",
+ i, buf_get_u32(arm->core_cache->reg_list[i].value, 0, 32));
}
/* send PC */
- xscale_send_u32(target, buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32));
- LOG_DEBUG("writing PC with value 0x%8.8x", buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32));
+ xscale_send_u32(target, buf_get_u32(arm->pc->value, 0, 32));
+ LOG_DEBUG("wrote PC with value 0x%8.8" PRIx32,
+ buf_get_u32(arm->pc->value, 0, 32));
target->debug_reason = DBG_REASON_NOTHALTED;
- if (!debug_execution)
- {
+ if (!debug_execution) {
/* registers are now invalid */
- armv4_5_invalidate_core_regs(target);
+ register_cache_invalidate(arm->core_cache);
target->state = TARGET_RUNNING;
target_call_event_callbacks(target, TARGET_EVENT_RESUMED);
- }
- else
- {
+ } else {
target->state = TARGET_DEBUG_RUNNING;
target_call_event_callbacks(target, TARGET_EVENT_DEBUG_RESUMED);
}
LOG_DEBUG("target resumed");
- xscale->handler_running = 1;
-
return ERROR_OK;
}
-static int xscale_step_inner(struct target_s *target, int current, u32 address, int handle_breakpoints)
+static int xscale_step_inner(struct target *target, int current,
+ uint32_t address, int handle_breakpoints)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
-
- u32 current_pc, next_pc;
+ struct xscale_common *xscale = target_to_xscale(target);
+ struct arm *arm = &xscale->arm;
+ uint32_t next_pc;
int retval;
int i;
-
target->debug_reason = DBG_REASON_SINGLESTEP;
/* calculate PC of next instruction */
- if ((retval = arm_simulate_step(target, &next_pc)) != ERROR_OK)
- {
- u32 current_opcode;
+ retval = arm_simulate_step(target, &next_pc);
+ if (retval != ERROR_OK) {
+ uint32_t current_opcode, current_pc;
+ current_pc = buf_get_u32(arm->pc->value, 0, 32);
+
target_read_u32(target, current_pc, ¤t_opcode);
- LOG_ERROR("BUG: couldn't calculate PC of next instruction, current opcode was 0x%8.8x", current_opcode);
+ LOG_ERROR(
+ "BUG: couldn't calculate PC of next instruction, current opcode was 0x%8.8" PRIx32 "",
+ current_opcode);
return retval;
}
LOG_DEBUG("enable single-step");
- if ((retval=xscale_enable_single_step(target, next_pc))!=ERROR_OK)
+ retval = xscale_enable_single_step(target, next_pc);
+ if (retval != ERROR_OK)
return retval;
/* restore banked registers */
- if ((retval=xscale_restore_context(target))!=ERROR_OK)
+ retval = xscale_restore_banked(target);
+ if (retval != ERROR_OK)
return retval;
/* send resume request (command 0x30 or 0x31)
* clean the trace buffer if it is to be enabled (0x62) */
- if (xscale->trace.buffer_enabled)
- {
- if ((retval=xscale_send_u32(target, 0x62))!=ERROR_OK)
+ if (xscale->trace.mode != XSCALE_TRACE_DISABLED) {
+ retval = xscale_send_u32(target, 0x62);
+ if (retval != ERROR_OK)
return retval;
- if ((retval=xscale_send_u32(target, 0x31))!=ERROR_OK)
+ retval = xscale_send_u32(target, 0x31);
+ if (retval != ERROR_OK)
return retval;
- }
- else
- if ((retval=xscale_send_u32(target, 0x30))!=ERROR_OK)
+ } else {
+ retval = xscale_send_u32(target, 0x30);
+ if (retval != ERROR_OK)
return retval;
+ }
/* send CPSR */
- if ((retval=xscale_send_u32(target, buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 32)))!=ERROR_OK)
+ retval = xscale_send_u32(target,
+ buf_get_u32(arm->cpsr->value, 0, 32));
+ if (retval != ERROR_OK)
return retval;
- LOG_DEBUG("writing cpsr with value 0x%8.8x", buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 32));
+ LOG_DEBUG("writing cpsr with value 0x%8.8" PRIx32,
+ buf_get_u32(arm->cpsr->value, 0, 32));
- for (i = 7; i >= 0; i--)
- {
+ for (i = 7; i >= 0; i--) {
/* send register */
- if ((retval=xscale_send_u32(target, buf_get_u32(armv4_5->core_cache->reg_list[i].value, 0, 32)))!=ERROR_OK)
+ retval = xscale_send_u32(target,
+ buf_get_u32(arm->core_cache->reg_list[i].value, 0, 32));
+ if (retval != ERROR_OK)
return retval;
- LOG_DEBUG("writing r%i with value 0x%8.8x", i, buf_get_u32(armv4_5->core_cache->reg_list[i].value, 0, 32));
+ LOG_DEBUG("writing r%i with value 0x%8.8" PRIx32 "", i,
+ buf_get_u32(arm->core_cache->reg_list[i].value, 0, 32));
}
/* send PC */
- if ((retval=xscale_send_u32(target, buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32)))!=ERROR_OK)
+ retval = xscale_send_u32(target,
+ buf_get_u32(arm->pc->value, 0, 32));
+ if (retval != ERROR_OK)
return retval;
- LOG_DEBUG("writing PC with value 0x%8.8x", buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32));
+ LOG_DEBUG("wrote PC with value 0x%8.8" PRIx32,
+ buf_get_u32(arm->pc->value, 0, 32));
target_call_event_callbacks(target, TARGET_EVENT_RESUMED);
/* registers are now invalid */
- if ((retval=armv4_5_invalidate_core_regs(target))!=ERROR_OK)
- return retval;
+ register_cache_invalidate(arm->core_cache);
/* wait for and process debug entry */
- if ((retval=xscale_debug_entry(target))!=ERROR_OK)
+ retval = xscale_debug_entry(target);
+ if (retval != ERROR_OK)
return retval;
LOG_DEBUG("disable single-step");
- if ((retval=xscale_disable_single_step(target))!=ERROR_OK)
+ retval = xscale_disable_single_step(target);
+ if (retval != ERROR_OK)
return retval;
target_call_event_callbacks(target, TARGET_EVENT_HALTED);
return ERROR_OK;
}
-int xscale_step(struct target_s *target, int current, u32 address, int handle_breakpoints)
+static int xscale_step(struct target *target, int current,
+ uint32_t address, int handle_breakpoints)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- breakpoint_t *breakpoint = target->breakpoints;
+ struct arm *arm = target_to_arm(target);
+ struct breakpoint *breakpoint = NULL;
- u32 current_pc;
+ uint32_t current_pc;
int retval;
- if (target->state != TARGET_HALTED)
- {
+ if (target->state != TARGET_HALTED) {
LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
/* current = 1: continue on current pc, otherwise continue at <address> */
if (!current)
- buf_set_u32(armv4_5->core_cache->reg_list[15].value, 0, 32, address);
+ buf_set_u32(arm->pc->value, 0, 32, address);
- current_pc = buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32);
+ current_pc = buf_get_u32(arm->pc->value, 0, 32);
/* if we're at the reset vector, we have to simulate the step */
- if (current_pc == 0x0)
- {
- if ((retval=arm_simulate_step(target, NULL))!=ERROR_OK)
+ if (current_pc == 0x0) {
+ retval = arm_simulate_step(target, NULL);
+ if (retval != ERROR_OK)
return retval;
- current_pc = buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32);
+ current_pc = buf_get_u32(arm->pc->value, 0, 32);
+ LOG_DEBUG("current pc %" PRIx32, current_pc);
target->debug_reason = DBG_REASON_SINGLESTEP;
target_call_event_callbacks(target, TARGET_EVENT_HALTED);
/* the front-end may request us not to handle breakpoints */
if (handle_breakpoints)
- if ((breakpoint = breakpoint_find(target, buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32))))
- {
- if ((retval=xscale_unset_breakpoint(target, breakpoint))!=ERROR_OK)
- return retval;
- }
+ breakpoint = breakpoint_find(target,
+ buf_get_u32(arm->pc->value, 0, 32));
+ if (breakpoint != NULL) {
+ retval = xscale_unset_breakpoint(target, breakpoint);
+ if (retval != ERROR_OK)
+ return retval;
+ }
retval = xscale_step_inner(target, current, address, handle_breakpoints);
+ if (retval != ERROR_OK)
+ return retval;
if (breakpoint)
- {
xscale_set_breakpoint(target, breakpoint);
- }
LOG_DEBUG("target stepped");
}
-int xscale_assert_reset(target_t *target)
+static int xscale_assert_reset(struct target *target)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
+ struct xscale_common *xscale = target_to_xscale(target);
LOG_DEBUG("target->state: %s",
- Jim_Nvp_value2name_simple( nvp_target_state, target->state )->name);
+ target_state_name(target));
+
+ /* assert reset */
+ jtag_add_reset(0, 1);
+
+ /* sleep 1ms, to be sure we fulfill any requirements */
+ jtag_add_sleep(1000);
+ jtag_execute_queue();
/* select DCSR instruction (set endstate to R-T-I to ensure we don't
* end up in T-L-R, which would reset JTAG
*/
- jtag_add_end_state(TAP_RTI);
- xscale_jtag_set_instr(xscale->jtag_info.chain_pos, xscale->jtag_info.dcsr);
+ xscale_jtag_set_instr(target->tap,
+ XSCALE_SELDCSR << xscale->xscale_variant,
+ TAP_IDLE);
/* set Hold reset, Halt mode and Trap Reset */
buf_set_u32(xscale->reg_cache->reg_list[XSCALE_DCSR].value, 30, 1, 0x1);
xscale_write_dcsr(target, 1, 0);
/* select BYPASS, because having DCSR selected caused problems on the PXA27x */
- xscale_jtag_set_instr(xscale->jtag_info.chain_pos, 0x7f);
- jtag_execute_queue();
-
- /* assert reset */
- jtag_add_reset(0, 1);
-
- /* sleep 1ms, to be sure we fulfill any requirements */
- jtag_add_sleep(1000);
+ xscale_jtag_set_instr(target->tap, ~0, TAP_IDLE);
jtag_execute_queue();
target->state = TARGET_RESET;
- if (target->reset_halt)
- {
- int retval;
- if ((retval = target_halt(target))!=ERROR_OK)
+ if (target->reset_halt) {
+ int retval = target_halt(target);
+ if (retval != ERROR_OK)
return retval;
- }
+ }
return ERROR_OK;
}
-int xscale_deassert_reset(target_t *target)
+static int xscale_deassert_reset(struct target *target)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
-
- fileio_t debug_handler;
- u32 address;
- u32 binary_size;
-
- u32 buf_cnt;
- int i;
- int retval;
-
- breakpoint_t *breakpoint = target->breakpoints;
+ struct xscale_common *xscale = target_to_xscale(target);
+ struct breakpoint *breakpoint = target->breakpoints;
LOG_DEBUG("-");
xscale->dbr1_used = 0;
/* mark all hardware breakpoints as unset */
- while (breakpoint)
- {
+ while (breakpoint) {
if (breakpoint->type == BKPT_HARD)
- {
breakpoint->set = 0;
- }
breakpoint = breakpoint->next;
}
- if (!xscale->handler_installed)
+ xscale->trace.mode = XSCALE_TRACE_DISABLED;
+ xscale_free_trace_data(xscale);
+
+ register_cache_invalidate(xscale->arm.core_cache);
+
+ /* FIXME mark hardware watchpoints got unset too. Also,
+ * at least some of the XScale registers are invalid...
+ */
+
+ /*
+ * REVISIT: *assumes* we had a SRST+TRST reset so the mini-icache
+ * contents got invalidated. Safer to force that, so writing new
+ * contents can't ever fail..
+ */
{
+ uint32_t address;
+ unsigned buf_cnt;
+ const uint8_t *buffer = xscale_debug_handler;
+ int retval;
+
/* release SRST */
jtag_add_reset(0, 0);
/* wait 300ms; 150 and 100ms were not enough */
jtag_add_sleep(300*1000);
- jtag_add_runtest(2030, TAP_RTI);
+ jtag_add_runtest(2030, TAP_IDLE);
jtag_execute_queue();
/* set Hold reset, Halt mode and Trap Reset */
buf_set_u32(xscale->reg_cache->reg_list[XSCALE_DCSR].value, 16, 1, 0x1);
xscale_write_dcsr(target, 1, 0);
- /* Load debug handler */
- if (fileio_open(&debug_handler, "xscale/debug_handler.bin", FILEIO_READ, FILEIO_BINARY) != ERROR_OK)
- {
- return ERROR_OK;
- }
-
- if ((binary_size = debug_handler.size) % 4)
- {
- LOG_ERROR("debug_handler.bin: size not a multiple of 4");
- exit(-1);
- }
-
- if (binary_size > 0x800)
- {
- LOG_ERROR("debug_handler.bin: larger than 2kb");
- exit(-1);
- }
-
- binary_size = CEIL(binary_size, 32) * 32;
-
+ /* Load the debug handler into the mini-icache. Since
+ * it's using halt mode (not monitor mode), it runs in
+ * "Special Debug State" for access to registers, memory,
+ * coprocessors, trace data, etc.
+ */
address = xscale->handler_address;
- while (binary_size > 0)
- {
- u32 cache_line[8];
- u8 buffer[32];
-
- if ((retval = fileio_read(&debug_handler, 32, buffer, &buf_cnt)) != ERROR_OK)
- {
-
- }
-
- for (i = 0; i < buf_cnt; i += 4)
- {
- /* convert LE buffer to host-endian u32 */
+ for (unsigned binary_size = sizeof xscale_debug_handler - 1;
+ binary_size > 0;
+ binary_size -= buf_cnt, buffer += buf_cnt) {
+ uint32_t cache_line[8];
+ unsigned i;
+
+ buf_cnt = binary_size;
+ if (buf_cnt > 32)
+ buf_cnt = 32;
+
+ for (i = 0; i < buf_cnt; i += 4) {
+ /* convert LE buffer to host-endian uint32_t */
cache_line[i / 4] = le_to_h_u32(&buffer[i]);
}
- for (; buf_cnt < 32; buf_cnt += 4)
- {
- cache_line[buf_cnt / 4] = 0xe1a08008;
- }
+ for (; i < 32; i += 4)
+ cache_line[i / 4] = 0xe1a08008;
/* only load addresses other than the reset vectors */
- if ((address % 0x400) != 0x0)
- {
- xscale_load_ic(target, 1, address, cache_line);
+ if ((address % 0x400) != 0x0) {
+ retval = xscale_load_ic(target, address,
+ cache_line);
+ if (retval != ERROR_OK)
+ return retval;
}
address += buf_cnt;
- binary_size -= buf_cnt;
- };
+ }
+ ;
- xscale_load_ic(target, 1, 0x0, xscale->low_vectors);
- xscale_load_ic(target, 1, 0xffff0000, xscale->high_vectors);
+ retval = xscale_load_ic(target, 0x0,
+ xscale->low_vectors);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = xscale_load_ic(target, 0xffff0000,
+ xscale->high_vectors);
+ if (retval != ERROR_OK)
+ return retval;
- jtag_add_runtest(30, TAP_RTI);
+ jtag_add_runtest(30, TAP_IDLE);
jtag_add_sleep(100000);
xscale_write_dcsr(target, 0, 1);
target->state = TARGET_RUNNING;
- if (!target->reset_halt)
- {
+ if (!target->reset_halt) {
jtag_add_sleep(10000);
/* we should have entered debug now */
/* resume the target */
xscale_resume(target, 1, 0x0, 1, 0);
}
-
- fileio_close(&debug_handler);
}
- else
- {
- jtag_add_reset(0, 0);
- }
-
-
- return ERROR_OK;
-}
-
-int xscale_soft_reset_halt(struct target_s *target)
-{
return ERROR_OK;
}
-int xscale_read_core_reg(struct target_s *target, int num, enum armv4_5_mode mode)
+static int xscale_read_core_reg(struct target *target, struct reg *r,
+ int num, enum arm_mode mode)
{
-
+ /** \todo add debug handler support for core register reads */
+ LOG_ERROR("not implemented");
return ERROR_OK;
}
-int xscale_write_core_reg(struct target_s *target, int num, enum armv4_5_mode mode, u32 value)
+static int xscale_write_core_reg(struct target *target, struct reg *r,
+ int num, enum arm_mode mode, uint32_t value)
{
-
+ /** \todo add debug handler support for core register writes */
+ LOG_ERROR("not implemented");
return ERROR_OK;
}
-int xscale_full_context(target_t *target)
+static int xscale_full_context(struct target *target)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
+ struct arm *arm = target_to_arm(target);
- u32 *buffer;
+ uint32_t *buffer;
int i, j;
LOG_DEBUG("-");
- if (target->state != TARGET_HALTED)
- {
+ if (target->state != TARGET_HALTED) {
LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
* we can't enter User mode on an XScale (unpredictable),
* but User shares registers with SYS
*/
- for(i = 1; i < 7; i++)
- {
- int valid = 1;
+ for (i = 1; i < 7; i++) {
+ enum arm_mode mode = armv4_5_number_to_mode(i);
+ bool valid = true;
+ struct reg *r;
+
+ if (mode == ARM_MODE_USR)
+ continue;
/* check if there are invalid registers in the current mode
*/
- for (j = 0; j <= 16; j++)
- {
- if (ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5_number_to_mode(i), j).valid == 0)
- valid = 0;
+ for (j = 0; valid && j <= 16; j++) {
+ if (!ARMV4_5_CORE_REG_MODE(arm->core_cache,
+ mode, j).valid)
+ valid = false;
}
+ if (valid)
+ continue;
+
+ /* request banked registers */
+ xscale_send_u32(target, 0x0);
- if (!valid)
- {
- u32 tmp_cpsr;
+ /* send CPSR for desired bank mode */
+ xscale_send_u32(target, mode | 0xc0 /* I/F bits */);
- /* request banked registers */
- xscale_send_u32(target, 0x0);
+ /* get banked registers: r8 to r14; and SPSR
+ * except in USR/SYS mode
+ */
+ if (mode != ARM_MODE_SYS) {
+ /* SPSR */
+ r = &ARMV4_5_CORE_REG_MODE(arm->core_cache,
+ mode, 16);
- tmp_cpsr = 0x0;
- tmp_cpsr |= armv4_5_number_to_mode(i);
- tmp_cpsr |= 0xc0; /* I/F bits */
+ xscale_receive(target, buffer, 8);
- /* send CPSR for desired mode */
- xscale_send_u32(target, tmp_cpsr);
+ buf_set_u32(r->value, 0, 32, buffer[7]);
+ r->dirty = false;
+ r->valid = true;
+ } else
+ xscale_receive(target, buffer, 7);
- /* get banked registers, r8 to r14, and spsr if not in USR/SYS mode */
- if ((armv4_5_number_to_mode(i) != ARMV4_5_MODE_USR) && (armv4_5_number_to_mode(i) != ARMV4_5_MODE_SYS))
- {
- xscale_receive(target, buffer, 8);
- buf_set_u32(ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 16).value, 0, 32, buffer[7]);
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5_number_to_mode(i), 16).dirty = 0;
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5_number_to_mode(i), 16).valid = 1;
- }
- else
- {
- xscale_receive(target, buffer, 7);
- }
+ /* move data from buffer to register cache */
+ for (j = 8; j <= 14; j++) {
+ r = &ARMV4_5_CORE_REG_MODE(arm->core_cache,
+ mode, j);
- /* move data from buffer to register cache */
- for (j = 8; j <= 14; j++)
- {
- buf_set_u32(ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5_number_to_mode(i), j).value, 0, 32, buffer[j - 8]);
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5_number_to_mode(i), j).dirty = 0;
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5_number_to_mode(i), j).valid = 1;
- }
+ buf_set_u32(r->value, 0, 32, buffer[j - 8]);
+ r->dirty = false;
+ r->valid = true;
}
}
return ERROR_OK;
}
-int xscale_restore_context(target_t *target)
+static int xscale_restore_banked(struct target *target)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
+ struct arm *arm = target_to_arm(target);
int i, j;
- LOG_DEBUG("-");
-
- if (target->state != TARGET_HALTED)
- {
+ if (target->state != TARGET_HALTED) {
LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
/* iterate through processor modes (FIQ, IRQ, SVC, ABT, UND and SYS)
- * we can't enter User mode on an XScale (unpredictable),
- * but User shares registers with SYS
- */
- for(i = 1; i < 7; i++)
- {
- int dirty = 0;
-
- /* check if there are invalid registers in the current mode
- */
- for (j = 8; j <= 14; j++)
- {
- if (ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5_number_to_mode(i), j).dirty == 1)
- dirty = 1;
+ * and check if any banked registers need to be written. Ignore
+ * USR mode (number 0) in favor of SYS; we can't enter User mode on
+ * an XScale (unpredictable), but they share all registers.
+ */
+ for (i = 1; i < 7; i++) {
+ enum arm_mode mode = armv4_5_number_to_mode(i);
+ struct reg *r;
+
+ if (mode == ARM_MODE_USR)
+ continue;
+
+ /* check if there are dirty registers in this mode */
+ for (j = 8; j <= 14; j++) {
+ if (ARMV4_5_CORE_REG_MODE(arm->core_cache,
+ mode, j).dirty)
+ goto dirty;
}
/* if not USR/SYS, check if the SPSR needs to be written */
- if ((armv4_5_number_to_mode(i) != ARMV4_5_MODE_USR) && (armv4_5_number_to_mode(i) != ARMV4_5_MODE_SYS))
- {
- if (ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5_number_to_mode(i), 16).dirty == 1)
- dirty = 1;
+ if (mode != ARM_MODE_SYS) {
+ if (ARMV4_5_CORE_REG_MODE(arm->core_cache,
+ mode, 16).dirty)
+ goto dirty;
}
- if (dirty)
- {
- u32 tmp_cpsr;
+ /* there's nothing to flush for this mode */
+ continue;
- /* send banked registers */
- xscale_send_u32(target, 0x1);
+dirty:
+ /* command 0x1: "send banked registers" */
+ xscale_send_u32(target, 0x1);
- tmp_cpsr = 0x0;
- tmp_cpsr |= armv4_5_number_to_mode(i);
- tmp_cpsr |= 0xc0; /* I/F bits */
+ /* send CPSR for desired mode */
+ xscale_send_u32(target, mode | 0xc0 /* I/F bits */);
- /* send CPSR for desired mode */
- xscale_send_u32(target, tmp_cpsr);
-
- /* send banked registers, r8 to r14, and spsr if not in USR/SYS mode */
- for (j = 8; j <= 14; j++)
- {
- xscale_send_u32(target, buf_get_u32(ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, j).value, 0, 32));
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5_number_to_mode(i), j).dirty = 0;
- }
+ /* send r8 to r14/lr ... only FIQ needs more than r13..r14,
+ * but this protocol doesn't understand that nuance.
+ */
+ for (j = 8; j <= 14; j++) {
+ r = &ARMV4_5_CORE_REG_MODE(arm->core_cache,
+ mode, j);
+ xscale_send_u32(target, buf_get_u32(r->value, 0, 32));
+ r->dirty = false;
+ }
- if ((armv4_5_number_to_mode(i) != ARMV4_5_MODE_USR) && (armv4_5_number_to_mode(i) != ARMV4_5_MODE_SYS))
- {
- xscale_send_u32(target, buf_get_u32(ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 16).value, 0, 32));
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5_number_to_mode(i), 16).dirty = 0;
- }
+ /* send spsr if not in USR/SYS mode */
+ if (mode != ARM_MODE_SYS) {
+ r = &ARMV4_5_CORE_REG_MODE(arm->core_cache,
+ mode, 16);
+ xscale_send_u32(target, buf_get_u32(r->value, 0, 32));
+ r->dirty = false;
}
}
return ERROR_OK;
}
-int xscale_read_memory(struct target_s *target, u32 address, u32 size, u32 count, u8 *buffer)
+static int xscale_read_memory(struct target *target, uint32_t address,
+ uint32_t size, uint32_t count, uint8_t *buffer)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
- u32 *buf32;
- int i;
+ struct xscale_common *xscale = target_to_xscale(target);
+ uint32_t *buf32;
+ uint32_t i;
int retval;
- LOG_DEBUG("address: 0x%8.8x, size: 0x%8.8x, count: 0x%8.8x", address, size, count);
+ LOG_DEBUG("address: 0x%8.8" PRIx32 ", size: 0x%8.8" PRIx32 ", count: 0x%8.8" PRIx32,
+ address,
+ size,
+ count);
- if (target->state != TARGET_HALTED)
- {
+ if (target->state != TARGET_HALTED) {
LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
/* sanitize arguments */
if (((size != 4) && (size != 2) && (size != 1)) || (count == 0) || !(buffer))
- return ERROR_INVALID_ARGUMENTS;
+ return ERROR_COMMAND_SYNTAX_ERROR;
if (((size == 4) && (address & 0x3u)) || ((size == 2) && (address & 0x1u)))
return ERROR_TARGET_UNALIGNED_ACCESS;
/* send memory read request (command 0x1n, n: access size) */
- if ((retval=xscale_send_u32(target, 0x10 | size))!=ERROR_OK)
+ retval = xscale_send_u32(target, 0x10 | size);
+ if (retval != ERROR_OK)
return retval;
/* send base address for read request */
- if ((retval=xscale_send_u32(target, address))!=ERROR_OK)
+ retval = xscale_send_u32(target, address);
+ if (retval != ERROR_OK)
return retval;
/* send number of requested data words */
- if ((retval=xscale_send_u32(target, count))!=ERROR_OK)
+ retval = xscale_send_u32(target, count);
+ if (retval != ERROR_OK)
return retval;
/* receive data from target (count times 32-bit words in host endianness) */
buf32 = malloc(4 * count);
- if ((retval=xscale_receive(target, buf32, count))!=ERROR_OK)
+ retval = xscale_receive(target, buf32, count);
+ if (retval != ERROR_OK) {
+ free(buf32);
return retval;
+ }
/* extract data from host-endian buffer into byte stream */
- for (i = 0; i < count; i++)
- {
- switch (size)
- {
+ for (i = 0; i < count; i++) {
+ switch (size) {
case 4:
target_buffer_set_u32(target, buffer, buf32[i]);
buffer += 4;
*buffer++ = buf32[i] & 0xff;
break;
default:
- LOG_ERROR("should never get here");
- exit(-1);
+ LOG_ERROR("invalid read size");
+ return ERROR_COMMAND_SYNTAX_ERROR;
}
}
free(buf32);
/* examine DCSR, to see if Sticky Abort (SA) got set */
- if ((retval=xscale_read_dcsr(target))!=ERROR_OK)
+ retval = xscale_read_dcsr(target);
+ if (retval != ERROR_OK)
return retval;
- if (buf_get_u32(xscale->reg_cache->reg_list[XSCALE_DCSR].value, 5, 1) == 1)
- {
+ if (buf_get_u32(xscale->reg_cache->reg_list[XSCALE_DCSR].value, 5, 1) == 1) {
/* clear SA bit */
- if ((retval=xscale_send_u32(target, 0x60))!=ERROR_OK)
+ retval = xscale_send_u32(target, 0x60);
+ if (retval != ERROR_OK)
return retval;
return ERROR_TARGET_DATA_ABORT;
return ERROR_OK;
}
-int xscale_write_memory(struct target_s *target, u32 address, u32 size, u32 count, u8 *buffer)
+static int xscale_read_phys_memory(struct target *target, uint32_t address,
+ uint32_t size, uint32_t count, uint8_t *buffer)
+{
+ struct xscale_common *xscale = target_to_xscale(target);
+
+ /* with MMU inactive, there are only physical addresses */
+ if (!xscale->armv4_5_mmu.mmu_enabled)
+ return xscale_read_memory(target, address, size, count, buffer);
+
+ /** \todo: provide a non-stub implementation of this routine. */
+ LOG_ERROR("%s: %s is not implemented. Disable MMU?",
+ target_name(target), __func__);
+ return ERROR_FAIL;
+}
+
+static int xscale_write_memory(struct target *target, uint32_t address,
+ uint32_t size, uint32_t count, const uint8_t *buffer)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
+ struct xscale_common *xscale = target_to_xscale(target);
int retval;
- LOG_DEBUG("address: 0x%8.8x, size: 0x%8.8x, count: 0x%8.8x", address, size, count);
+ LOG_DEBUG("address: 0x%8.8" PRIx32 ", size: 0x%8.8" PRIx32 ", count: 0x%8.8" PRIx32,
+ address,
+ size,
+ count);
- if (target->state != TARGET_HALTED)
- {
+ if (target->state != TARGET_HALTED) {
LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
/* sanitize arguments */
if (((size != 4) && (size != 2) && (size != 1)) || (count == 0) || !(buffer))
- return ERROR_INVALID_ARGUMENTS;
+ return ERROR_COMMAND_SYNTAX_ERROR;
if (((size == 4) && (address & 0x3u)) || ((size == 2) && (address & 0x1u)))
return ERROR_TARGET_UNALIGNED_ACCESS;
/* send memory write request (command 0x2n, n: access size) */
- if ((retval=xscale_send_u32(target, 0x20 | size))!=ERROR_OK)
+ retval = xscale_send_u32(target, 0x20 | size);
+ if (retval != ERROR_OK)
return retval;
/* send base address for read request */
- if ((retval=xscale_send_u32(target, address))!=ERROR_OK)
+ retval = xscale_send_u32(target, address);
+ if (retval != ERROR_OK)
return retval;
/* send number of requested data words to be written*/
- if ((retval=xscale_send_u32(target, count))!=ERROR_OK)
+ retval = xscale_send_u32(target, count);
+ if (retval != ERROR_OK)
return retval;
/* extract data from host-endian buffer into byte stream */
#if 0
- for (i = 0; i < count; i++)
- {
- switch (size)
- {
+ for (i = 0; i < count; i++) {
+ switch (size) {
case 4:
value = target_buffer_get_u32(target, buffer);
xscale_send_u32(target, value);
}
}
#endif
- if ((retval=xscale_send(target, buffer, count, size))!=ERROR_OK)
+ retval = xscale_send(target, buffer, count, size);
+ if (retval != ERROR_OK)
return retval;
/* examine DCSR, to see if Sticky Abort (SA) got set */
- if ((retval=xscale_read_dcsr(target))!=ERROR_OK)
+ retval = xscale_read_dcsr(target);
+ if (retval != ERROR_OK)
return retval;
- if (buf_get_u32(xscale->reg_cache->reg_list[XSCALE_DCSR].value, 5, 1) == 1)
- {
+ if (buf_get_u32(xscale->reg_cache->reg_list[XSCALE_DCSR].value, 5, 1) == 1) {
/* clear SA bit */
- if ((retval=xscale_send_u32(target, 0x60))!=ERROR_OK)
+ retval = xscale_send_u32(target, 0x60);
+ if (retval != ERROR_OK)
return retval;
+ LOG_ERROR("data abort writing memory");
return ERROR_TARGET_DATA_ABORT;
}
return ERROR_OK;
}
-int xscale_bulk_write_memory(target_t *target, u32 address, u32 count, u8 *buffer)
+static int xscale_write_phys_memory(struct target *target, uint32_t address,
+ uint32_t size, uint32_t count, const uint8_t *buffer)
{
- return xscale_write_memory(target, address, 4, count, buffer);
+ struct xscale_common *xscale = target_to_xscale(target);
+
+ /* with MMU inactive, there are only physical addresses */
+ if (!xscale->armv4_5_mmu.mmu_enabled)
+ return xscale_write_memory(target, address, size, count, buffer);
+
+ /** \todo: provide a non-stub implementation of this routine. */
+ LOG_ERROR("%s: %s is not implemented. Disable MMU?",
+ target_name(target), __func__);
+ return ERROR_FAIL;
}
-u32 xscale_get_ttb(target_t *target)
+static int xscale_get_ttb(struct target *target, uint32_t *result)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
- u32 ttb;
+ struct xscale_common *xscale = target_to_xscale(target);
+ uint32_t ttb;
+ int retval;
- xscale_get_reg(&xscale->reg_cache->reg_list[XSCALE_TTB]);
+ retval = xscale_get_reg(&xscale->reg_cache->reg_list[XSCALE_TTB]);
+ if (retval != ERROR_OK)
+ return retval;
ttb = buf_get_u32(xscale->reg_cache->reg_list[XSCALE_TTB].value, 0, 32);
- return ttb;
+ *result = ttb;
+
+ return ERROR_OK;
}
-void xscale_disable_mmu_caches(target_t *target, int mmu, int d_u_cache, int i_cache)
+static int xscale_disable_mmu_caches(struct target *target, int mmu,
+ int d_u_cache, int i_cache)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
- u32 cp15_control;
+ struct xscale_common *xscale = target_to_xscale(target);
+ uint32_t cp15_control;
+ int retval;
/* read cp15 control register */
- xscale_get_reg(&xscale->reg_cache->reg_list[XSCALE_CTRL]);
+ retval = xscale_get_reg(&xscale->reg_cache->reg_list[XSCALE_CTRL]);
+ if (retval != ERROR_OK)
+ return retval;
cp15_control = buf_get_u32(xscale->reg_cache->reg_list[XSCALE_CTRL].value, 0, 32);
if (mmu)
cp15_control &= ~0x1U;
- if (d_u_cache)
- {
+ if (d_u_cache) {
/* clean DCache */
- xscale_send_u32(target, 0x50);
- xscale_send_u32(target, xscale->cache_clean_address);
+ retval = xscale_send_u32(target, 0x50);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = xscale_send_u32(target, xscale->cache_clean_address);
+ if (retval != ERROR_OK)
+ return retval;
/* invalidate DCache */
- xscale_send_u32(target, 0x51);
+ retval = xscale_send_u32(target, 0x51);
+ if (retval != ERROR_OK)
+ return retval;
cp15_control &= ~0x4U;
}
- if (i_cache)
- {
+ if (i_cache) {
/* invalidate ICache */
- xscale_send_u32(target, 0x52);
+ retval = xscale_send_u32(target, 0x52);
+ if (retval != ERROR_OK)
+ return retval;
cp15_control &= ~0x1000U;
}
/* write new cp15 control register */
- xscale_set_reg_u32(&xscale->reg_cache->reg_list[XSCALE_CTRL], cp15_control);
+ retval = xscale_set_reg_u32(&xscale->reg_cache->reg_list[XSCALE_CTRL], cp15_control);
+ if (retval != ERROR_OK)
+ return retval;
/* execute cpwait to ensure outstanding operations complete */
- xscale_send_u32(target, 0x53);
+ retval = xscale_send_u32(target, 0x53);
+ return retval;
}
-void xscale_enable_mmu_caches(target_t *target, int mmu, int d_u_cache, int i_cache)
+static int xscale_enable_mmu_caches(struct target *target, int mmu,
+ int d_u_cache, int i_cache)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
- u32 cp15_control;
+ struct xscale_common *xscale = target_to_xscale(target);
+ uint32_t cp15_control;
+ int retval;
/* read cp15 control register */
- xscale_get_reg(&xscale->reg_cache->reg_list[XSCALE_CTRL]);
+ retval = xscale_get_reg(&xscale->reg_cache->reg_list[XSCALE_CTRL]);
+ if (retval != ERROR_OK)
+ return retval;
cp15_control = buf_get_u32(xscale->reg_cache->reg_list[XSCALE_CTRL].value, 0, 32);
if (mmu)
cp15_control |= 0x1000U;
/* write new cp15 control register */
- xscale_set_reg_u32(&xscale->reg_cache->reg_list[XSCALE_CTRL], cp15_control);
+ retval = xscale_set_reg_u32(&xscale->reg_cache->reg_list[XSCALE_CTRL], cp15_control);
+ if (retval != ERROR_OK)
+ return retval;
/* execute cpwait to ensure outstanding operations complete */
- xscale_send_u32(target, 0x53);
+ retval = xscale_send_u32(target, 0x53);
+ return retval;
}
-int xscale_set_breakpoint(struct target_s *target, breakpoint_t *breakpoint)
+static int xscale_set_breakpoint(struct target *target,
+ struct breakpoint *breakpoint)
{
int retval;
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
+ struct xscale_common *xscale = target_to_xscale(target);
- if (target->state != TARGET_HALTED)
- {
+ if (target->state != TARGET_HALTED) {
LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
- if (breakpoint->set)
- {
+ if (breakpoint->set) {
LOG_WARNING("breakpoint already set");
return ERROR_OK;
}
- if (breakpoint->type == BKPT_HARD)
- {
- u32 value = breakpoint->address | 1;
- if (!xscale->ibcr0_used)
- {
+ if (breakpoint->type == BKPT_HARD) {
+ uint32_t value = breakpoint->address | 1;
+ if (!xscale->ibcr0_used) {
xscale_set_reg_u32(&xscale->reg_cache->reg_list[XSCALE_IBCR0], value);
xscale->ibcr0_used = 1;
breakpoint->set = 1; /* breakpoint set on first breakpoint register */
- }
- else if (!xscale->ibcr1_used)
- {
+ } else if (!xscale->ibcr1_used) {
xscale_set_reg_u32(&xscale->reg_cache->reg_list[XSCALE_IBCR1], value);
xscale->ibcr1_used = 1;
breakpoint->set = 2; /* breakpoint set on second breakpoint register */
- }
- else
- {
+ } else {/* bug: availability previously verified in xscale_add_breakpoint() */
LOG_ERROR("BUG: no hardware comparator available");
- return ERROR_OK;
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
- }
- else if (breakpoint->type == BKPT_SOFT)
- {
- if (breakpoint->length == 4)
- {
+ } else if (breakpoint->type == BKPT_SOFT) {
+ if (breakpoint->length == 4) {
/* keep the original instruction in target endianness */
- if((retval = target->type->read_memory(target, breakpoint->address, 4, 1, breakpoint->orig_instr)) != ERROR_OK)
- {
+ retval = target_read_memory(target, breakpoint->address, 4, 1,
+ breakpoint->orig_instr);
+ if (retval != ERROR_OK)
return retval;
- }
- /* write the original instruction in target endianness (arm7_9->arm_bkpt is host endian) */
- if((retval = target_write_u32(target, breakpoint->address, xscale->arm_bkpt)) != ERROR_OK)
- {
+ /* write the bkpt instruction in target endianness
+ *(arm7_9->arm_bkpt is host endian) */
+ retval = target_write_u32(target, breakpoint->address,
+ xscale->arm_bkpt);
+ if (retval != ERROR_OK)
return retval;
- }
- }
- else
- {
+ } else {
/* keep the original instruction in target endianness */
- if((retval = target->type->read_memory(target, breakpoint->address, 2, 1, breakpoint->orig_instr)) != ERROR_OK)
- {
+ retval = target_read_memory(target, breakpoint->address, 2, 1,
+ breakpoint->orig_instr);
+ if (retval != ERROR_OK)
return retval;
- }
- /* write the original instruction in target endianness (arm7_9->arm_bkpt is host endian) */
- if((retval = target_write_u32(target, breakpoint->address, xscale->thumb_bkpt)) != ERROR_OK)
- {
+ /* write the bkpt instruction in target endianness
+ *(arm7_9->arm_bkpt is host endian) */
+ retval = target_write_u16(target, breakpoint->address,
+ xscale->thumb_bkpt);
+ if (retval != ERROR_OK)
return retval;
- }
}
breakpoint->set = 1;
+
+ xscale_send_u32(target, 0x50); /* clean dcache */
+ xscale_send_u32(target, xscale->cache_clean_address);
+ xscale_send_u32(target, 0x51); /* invalidate dcache */
+ xscale_send_u32(target, 0x52); /* invalidate icache and flush fetch buffers */
}
return ERROR_OK;
-
}
-int xscale_add_breakpoint(struct target_s *target, breakpoint_t *breakpoint)
+static int xscale_add_breakpoint(struct target *target,
+ struct breakpoint *breakpoint)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
-
- if (target->state != TARGET_HALTED)
- {
- LOG_WARNING("target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
+ struct xscale_common *xscale = target_to_xscale(target);
- if ((breakpoint->type == BKPT_HARD) && (xscale->ibcr_available < 1))
- {
- LOG_INFO("no breakpoint unit available for hardware breakpoint");
+ if ((breakpoint->type == BKPT_HARD) && (xscale->ibcr_available < 1)) {
+ LOG_ERROR("no breakpoint unit available for hardware breakpoint");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
- else
- {
- xscale->ibcr_available--;
- }
- if ((breakpoint->length != 2) && (breakpoint->length != 4))
- {
- LOG_INFO("only breakpoints of two (Thumb) or four (ARM) bytes length supported");
+ if ((breakpoint->length != 2) && (breakpoint->length != 4)) {
+ LOG_ERROR("only breakpoints of two (Thumb) or four (ARM) bytes length supported");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
- return ERROR_OK;
+ if (breakpoint->type == BKPT_HARD)
+ xscale->ibcr_available--;
+
+ return xscale_set_breakpoint(target, breakpoint);
}
-int xscale_unset_breakpoint(struct target_s *target, breakpoint_t *breakpoint)
+static int xscale_unset_breakpoint(struct target *target,
+ struct breakpoint *breakpoint)
{
int retval;
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
+ struct xscale_common *xscale = target_to_xscale(target);
- if (target->state != TARGET_HALTED)
- {
+ if (target->state != TARGET_HALTED) {
LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
- if (!breakpoint->set)
- {
+ if (!breakpoint->set) {
LOG_WARNING("breakpoint not set");
return ERROR_OK;
}
- if (breakpoint->type == BKPT_HARD)
- {
- if (breakpoint->set == 1)
- {
+ if (breakpoint->type == BKPT_HARD) {
+ if (breakpoint->set == 1) {
xscale_set_reg_u32(&xscale->reg_cache->reg_list[XSCALE_IBCR0], 0x0);
xscale->ibcr0_used = 0;
- }
- else if (breakpoint->set == 2)
- {
+ } else if (breakpoint->set == 2) {
xscale_set_reg_u32(&xscale->reg_cache->reg_list[XSCALE_IBCR1], 0x0);
xscale->ibcr1_used = 0;
}
breakpoint->set = 0;
- }
- else
- {
+ } else {
/* restore original instruction (kept in target endianness) */
- if (breakpoint->length == 4)
- {
- if((retval = target->type->write_memory(target, breakpoint->address, 4, 1, breakpoint->orig_instr)) != ERROR_OK)
- {
+ if (breakpoint->length == 4) {
+ retval = target_write_memory(target, breakpoint->address, 4, 1,
+ breakpoint->orig_instr);
+ if (retval != ERROR_OK)
return retval;
- }
- }
- else
- {
- if((retval = target->type->write_memory(target, breakpoint->address, 2, 1, breakpoint->orig_instr)) != ERROR_OK)
- {
+ } else {
+ retval = target_write_memory(target, breakpoint->address, 2, 1,
+ breakpoint->orig_instr);
+ if (retval != ERROR_OK)
return retval;
- }
}
breakpoint->set = 0;
+
+ xscale_send_u32(target, 0x50); /* clean dcache */
+ xscale_send_u32(target, xscale->cache_clean_address);
+ xscale_send_u32(target, 0x51); /* invalidate dcache */
+ xscale_send_u32(target, 0x52); /* invalidate icache and flush fetch buffers */
}
return ERROR_OK;
}
-int xscale_remove_breakpoint(struct target_s *target, breakpoint_t *breakpoint)
+static int xscale_remove_breakpoint(struct target *target, struct breakpoint *breakpoint)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
+ struct xscale_common *xscale = target_to_xscale(target);
- if (target->state != TARGET_HALTED)
- {
- LOG_WARNING("target not halted");
+ if (target->state != TARGET_HALTED) {
+ LOG_ERROR("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
if (breakpoint->set)
- {
xscale_unset_breakpoint(target, breakpoint);
- }
if (breakpoint->type == BKPT_HARD)
xscale->ibcr_available++;
return ERROR_OK;
}
-int xscale_set_watchpoint(struct target_s *target, watchpoint_t *watchpoint)
+static int xscale_set_watchpoint(struct target *target,
+ struct watchpoint *watchpoint)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
- u8 enable=0;
- reg_t *dbcon = &xscale->reg_cache->reg_list[XSCALE_DBCON];
- u32 dbcon_value = buf_get_u32(dbcon->value, 0, 32);
+ struct xscale_common *xscale = target_to_xscale(target);
+ uint32_t enable = 0;
+ struct reg *dbcon = &xscale->reg_cache->reg_list[XSCALE_DBCON];
+ uint32_t dbcon_value = buf_get_u32(dbcon->value, 0, 32);
- if (target->state != TARGET_HALTED)
- {
- LOG_WARNING("target not halted");
+ if (target->state != TARGET_HALTED) {
+ LOG_ERROR("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
- xscale_get_reg(dbcon);
-
- switch (watchpoint->rw)
- {
+ switch (watchpoint->rw) {
case WPT_READ:
enable = 0x3;
break;
LOG_ERROR("BUG: watchpoint->rw neither read, write nor access");
}
- if (!xscale->dbr0_used)
- {
+ /* For watchpoint across more than one word, both DBR registers must
+ be enlisted, with the second used as a mask. */
+ if (watchpoint->length > 4) {
+ if (xscale->dbr0_used || xscale->dbr1_used) {
+ LOG_ERROR("BUG: sufficient hardware comparators unavailable");
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ }
+
+ /* Write mask value to DBR1, based on the length argument.
+ * Address bits ignored by the comparator are those set in mask. */
+ xscale_set_reg_u32(&xscale->reg_cache->reg_list[XSCALE_DBR1],
+ watchpoint->length - 1);
+ xscale->dbr1_used = 1;
+ enable |= 0x100; /* DBCON[M] */
+ }
+
+ if (!xscale->dbr0_used) {
xscale_set_reg_u32(&xscale->reg_cache->reg_list[XSCALE_DBR0], watchpoint->address);
dbcon_value |= enable;
xscale_set_reg_u32(dbcon, dbcon_value);
watchpoint->set = 1;
xscale->dbr0_used = 1;
- }
- else if (!xscale->dbr1_used)
- {
+ } else if (!xscale->dbr1_used) {
xscale_set_reg_u32(&xscale->reg_cache->reg_list[XSCALE_DBR1], watchpoint->address);
dbcon_value |= enable << 2;
xscale_set_reg_u32(dbcon, dbcon_value);
watchpoint->set = 2;
xscale->dbr1_used = 1;
- }
- else
- {
+ } else {
LOG_ERROR("BUG: no hardware comparator available");
- return ERROR_OK;
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
return ERROR_OK;
}
-int xscale_add_watchpoint(struct target_s *target, watchpoint_t *watchpoint)
+static int xscale_add_watchpoint(struct target *target,
+ struct watchpoint *watchpoint)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
+ struct xscale_common *xscale = target_to_xscale(target);
- if (target->state != TARGET_HALTED)
- {
- LOG_WARNING("target not halted");
- return ERROR_TARGET_NOT_HALTED;
+ if (xscale->dbr_available < 1) {
+ LOG_ERROR("no more watchpoint registers available");
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
- if (xscale->dbr_available < 1)
- {
- return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ if (watchpoint->value)
+ LOG_WARNING("xscale does not support value, mask arguments; ignoring");
+
+ /* check that length is a power of two */
+ for (uint32_t len = watchpoint->length; len != 1; len /= 2) {
+ if (len % 2) {
+ LOG_ERROR("xscale requires that watchpoint length is a power of two");
+ return ERROR_COMMAND_ARGUMENT_INVALID;
+ }
}
- if ((watchpoint->length != 1) && (watchpoint->length != 2) && (watchpoint->length != 4))
- {
+ if (watchpoint->length == 4) { /* single word watchpoint */
+ xscale->dbr_available--;/* one DBR reg used */
+ return ERROR_OK;
+ }
+
+ /* watchpoints across multiple words require both DBR registers */
+ if (xscale->dbr_available < 2) {
+ LOG_ERROR("insufficient watchpoint registers available");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
- xscale->dbr_available--;
+ if (watchpoint->length > watchpoint->address) {
+ LOG_ERROR("xscale does not support watchpoints with length "
+ "greater than address");
+ return ERROR_COMMAND_ARGUMENT_INVALID;
+ }
+ xscale->dbr_available = 0;
return ERROR_OK;
}
-int xscale_unset_watchpoint(struct target_s *target, watchpoint_t *watchpoint)
+static int xscale_unset_watchpoint(struct target *target,
+ struct watchpoint *watchpoint)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
- reg_t *dbcon = &xscale->reg_cache->reg_list[XSCALE_DBCON];
- u32 dbcon_value = buf_get_u32(dbcon->value, 0, 32);
+ struct xscale_common *xscale = target_to_xscale(target);
+ struct reg *dbcon = &xscale->reg_cache->reg_list[XSCALE_DBCON];
+ uint32_t dbcon_value = buf_get_u32(dbcon->value, 0, 32);
- if (target->state != TARGET_HALTED)
- {
+ if (target->state != TARGET_HALTED) {
LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
- if (!watchpoint->set)
- {
+ if (!watchpoint->set) {
LOG_WARNING("breakpoint not set");
return ERROR_OK;
}
- if (watchpoint->set == 1)
- {
- dbcon_value &= ~0x3;
+ if (watchpoint->set == 1) {
+ if (watchpoint->length > 4) {
+ dbcon_value &= ~0x103; /* clear DBCON[M] as well */
+ xscale->dbr1_used = 0; /* DBR1 was used for mask */
+ } else
+ dbcon_value &= ~0x3;
+
xscale_set_reg_u32(dbcon, dbcon_value);
xscale->dbr0_used = 0;
- }
- else if (watchpoint->set == 2)
- {
+ } else if (watchpoint->set == 2) {
dbcon_value &= ~0xc;
xscale_set_reg_u32(dbcon, dbcon_value);
xscale->dbr1_used = 0;
return ERROR_OK;
}
-int xscale_remove_watchpoint(struct target_s *target, watchpoint_t *watchpoint)
+static int xscale_remove_watchpoint(struct target *target, struct watchpoint *watchpoint)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
+ struct xscale_common *xscale = target_to_xscale(target);
- if (target->state != TARGET_HALTED)
- {
- LOG_WARNING("target not halted");
+ if (target->state != TARGET_HALTED) {
+ LOG_ERROR("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
if (watchpoint->set)
- {
xscale_unset_watchpoint(target, watchpoint);
- }
+
+ if (watchpoint->length > 4)
+ xscale->dbr_available++;/* both DBR regs now available */
xscale->dbr_available++;
return ERROR_OK;
}
-void xscale_enable_watchpoints(struct target_s *target)
-{
- watchpoint_t *watchpoint = target->watchpoints;
-
- while (watchpoint)
- {
- if (watchpoint->set == 0)
- xscale_set_watchpoint(target, watchpoint);
- watchpoint = watchpoint->next;
- }
-}
-
-void xscale_enable_breakpoints(struct target_s *target)
-{
- breakpoint_t *breakpoint = target->breakpoints;
-
- /* set any pending breakpoints */
- while (breakpoint)
- {
- if (breakpoint->set == 0)
- xscale_set_breakpoint(target, breakpoint);
- breakpoint = breakpoint->next;
- }
-}
-
-int xscale_get_reg(reg_t *reg)
+static int xscale_get_reg(struct reg *reg)
{
- xscale_reg_t *arch_info = reg->arch_info;
- target_t *target = arch_info->target;
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
+ struct xscale_reg *arch_info = reg->arch_info;
+ struct target *target = arch_info->target;
+ struct xscale_common *xscale = target_to_xscale(target);
/* DCSR, TX and RX are accessible via JTAG */
if (strcmp(reg->name, "XSCALE_DCSR") == 0)
- {
return xscale_read_dcsr(arch_info->target);
- }
- else if (strcmp(reg->name, "XSCALE_TX") == 0)
- {
+ else if (strcmp(reg->name, "XSCALE_TX") == 0) {
/* 1 = consume register content */
return xscale_read_tx(arch_info->target, 1);
- }
- else if (strcmp(reg->name, "XSCALE_RX") == 0)
- {
+ } else if (strcmp(reg->name, "XSCALE_RX") == 0) {
/* can't read from RX register (host -> debug handler) */
return ERROR_OK;
- }
- else if (strcmp(reg->name, "XSCALE_TXRXCTRL") == 0)
- {
+ } else if (strcmp(reg->name, "XSCALE_TXRXCTRL") == 0) {
/* can't (explicitly) read from TXRXCTRL register */
return ERROR_OK;
- }
- else /* Other DBG registers have to be transfered by the debug handler */
- {
- /* send CP read request (command 0x40) */
+ } else {/* Other DBG registers have to be transfered by the debug handler
+ * send CP read request (command 0x40) */
xscale_send_u32(target, 0x40);
/* send CP register number */
return ERROR_OK;
}
-int xscale_set_reg(reg_t *reg, u8* buf)
+static int xscale_set_reg(struct reg *reg, uint8_t *buf)
{
- xscale_reg_t *arch_info = reg->arch_info;
- target_t *target = arch_info->target;
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
- u32 value = buf_get_u32(buf, 0, 32);
+ struct xscale_reg *arch_info = reg->arch_info;
+ struct target *target = arch_info->target;
+ struct xscale_common *xscale = target_to_xscale(target);
+ uint32_t value = buf_get_u32(buf, 0, 32);
/* DCSR, TX and RX are accessible via JTAG */
- if (strcmp(reg->name, "XSCALE_DCSR") == 0)
- {
+ if (strcmp(reg->name, "XSCALE_DCSR") == 0) {
buf_set_u32(xscale->reg_cache->reg_list[XSCALE_DCSR].value, 0, 32, value);
return xscale_write_dcsr(arch_info->target, -1, -1);
- }
- else if (strcmp(reg->name, "XSCALE_RX") == 0)
- {
+ } else if (strcmp(reg->name, "XSCALE_RX") == 0) {
buf_set_u32(xscale->reg_cache->reg_list[XSCALE_RX].value, 0, 32, value);
return xscale_write_rx(arch_info->target);
- }
- else if (strcmp(reg->name, "XSCALE_TX") == 0)
- {
+ } else if (strcmp(reg->name, "XSCALE_TX") == 0) {
/* can't write to TX register (debug-handler -> host) */
return ERROR_OK;
- }
- else if (strcmp(reg->name, "XSCALE_TXRXCTRL") == 0)
- {
+ } else if (strcmp(reg->name, "XSCALE_TXRXCTRL") == 0) {
/* can't (explicitly) write to TXRXCTRL register */
return ERROR_OK;
- }
- else /* Other DBG registers have to be transfered by the debug handler */
- {
- /* send CP write request (command 0x41) */
+ } else {/* Other DBG registers have to be transfered by the debug handler
+ * send CP write request (command 0x41) */
xscale_send_u32(target, 0x41);
/* send CP register number */
return ERROR_OK;
}
-/* convenience wrapper to access XScale specific registers */
-int xscale_set_reg_u32(reg_t *reg, u32 value)
+static int xscale_write_dcsr_sw(struct target *target, uint32_t value)
{
- u8 buf[4];
-
- buf_set_u32(buf, 0, 32, value);
-
- return xscale_set_reg(reg, buf);
-}
-
-int xscale_write_dcsr_sw(target_t *target, u32 value)
-{
- /* get pointers to arch-specific information */
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
- reg_t *dcsr = &xscale->reg_cache->reg_list[XSCALE_DCSR];
- xscale_reg_t *dcsr_arch_info = dcsr->arch_info;
+ struct xscale_common *xscale = target_to_xscale(target);
+ struct reg *dcsr = &xscale->reg_cache->reg_list[XSCALE_DCSR];
+ struct xscale_reg *dcsr_arch_info = dcsr->arch_info;
/* send CP write request (command 0x41) */
xscale_send_u32(target, 0x41);
return ERROR_OK;
}
-int xscale_read_trace(target_t *target)
+static int xscale_read_trace(struct target *target)
{
- /* get pointers to arch-specific information */
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
- xscale_trace_data_t **trace_data_p;
+ struct xscale_common *xscale = target_to_xscale(target);
+ struct arm *arm = &xscale->arm;
+ struct xscale_trace_data **trace_data_p;
/* 258 words from debug handler
* 256 trace buffer entries
* 2 checkpoint addresses
*/
- u32 trace_buffer[258];
+ uint32_t trace_buffer[258];
int is_address[256];
int i, j;
+ unsigned int num_checkpoints = 0;
- if (target->state != TARGET_HALTED)
- {
+ if (target->state != TARGET_HALTED) {
LOG_WARNING("target must be stopped to read trace data");
return ERROR_TARGET_NOT_HALTED;
}
xscale_receive(target, trace_buffer, 258);
/* parse buffer backwards to identify address entries */
- for (i = 255; i >= 0; i--)
- {
+ for (i = 255; i >= 0; i--) {
+ /* also count number of checkpointed entries */
+ if ((trace_buffer[i] & 0xe0) == 0xc0)
+ num_checkpoints++;
+
is_address[i] = 0;
if (((trace_buffer[i] & 0xf0) == 0x90) ||
- ((trace_buffer[i] & 0xf0) == 0xd0))
- {
- if (i >= 3)
+ ((trace_buffer[i] & 0xf0) == 0xd0)) {
+ if (i > 0)
is_address[--i] = 1;
- if (i >= 2)
+ if (i > 0)
is_address[--i] = 1;
- if (i >= 1)
+ if (i > 0)
is_address[--i] = 1;
- if (i >= 0)
+ if (i > 0)
is_address[--i] = 1;
}
}
- /* search first non-zero entry */
+ /* search first non-zero entry that is not part of an address */
for (j = 0; (j < 256) && (trace_buffer[j] == 0) && (!is_address[j]); j++)
;
- if (j == 256)
- {
+ if (j == 256) {
LOG_DEBUG("no trace data collected");
return ERROR_XSCALE_NO_TRACE_DATA;
}
- for (trace_data_p = &xscale->trace.data; *trace_data_p; trace_data_p = &(*trace_data_p)->next)
+ /* account for possible partial address at buffer start (wrap mode only) */
+ if (is_address[0]) { /* first entry is address; complete set of 4? */
+ i = 1;
+ while (i < 4)
+ if (!is_address[i++])
+ break;
+ if (i < 4)
+ j += i; /* partial address; can't use it */
+ }
+
+ /* if first valid entry is indirect branch, can't use that either (no address) */
+ if (((trace_buffer[j] & 0xf0) == 0x90) || ((trace_buffer[j] & 0xf0) == 0xd0))
+ j++;
+
+ /* walk linked list to terminating entry */
+ for (trace_data_p = &xscale->trace.data; *trace_data_p;
+ trace_data_p = &(*trace_data_p)->next)
;
- *trace_data_p = malloc(sizeof(xscale_trace_data_t));
+ *trace_data_p = malloc(sizeof(struct xscale_trace_data));
(*trace_data_p)->next = NULL;
(*trace_data_p)->chkpt0 = trace_buffer[256];
(*trace_data_p)->chkpt1 = trace_buffer[257];
- (*trace_data_p)->last_instruction = buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32);
- (*trace_data_p)->entries = malloc(sizeof(xscale_trace_entry_t) * (256 - j));
+ (*trace_data_p)->last_instruction = buf_get_u32(arm->pc->value, 0, 32);
+ (*trace_data_p)->entries = malloc(sizeof(struct xscale_trace_entry) * (256 - j));
(*trace_data_p)->depth = 256 - j;
+ (*trace_data_p)->num_checkpoints = num_checkpoints;
- for (i = j; i < 256; i++)
- {
+ for (i = j; i < 256; i++) {
(*trace_data_p)->entries[i - j].data = trace_buffer[i];
if (is_address[i])
(*trace_data_p)->entries[i - j].type = XSCALE_TRACE_ADDRESS;
return ERROR_OK;
}
-int xscale_read_instruction(target_t *target, arm_instruction_t *instruction)
+static int xscale_read_instruction(struct target *target, uint32_t pc,
+ struct arm_instruction *instruction)
{
- /* get pointers to arch-specific information */
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
+ struct xscale_common *const xscale = target_to_xscale(target);
int i;
int section = -1;
- u32 size_read;
- u32 opcode;
+ size_t size_read;
+ uint32_t opcode;
int retval;
if (!xscale->trace.image)
return ERROR_TRACE_IMAGE_UNAVAILABLE;
/* search for the section the current instruction belongs to */
- for (i = 0; i < xscale->trace.image->num_sections; i++)
- {
- if ((xscale->trace.image->sections[i].base_address <= xscale->trace.current_pc) &&
- (xscale->trace.image->sections[i].base_address + xscale->trace.image->sections[i].size > xscale->trace.current_pc))
- {
+ for (i = 0; i < xscale->trace.image->num_sections; i++) {
+ if ((xscale->trace.image->sections[i].base_address <= pc) &&
+ (xscale->trace.image->sections[i].base_address +
+ xscale->trace.image->sections[i].size > pc)) {
section = i;
break;
}
}
- if (section == -1)
- {
+ if (section == -1) {
/* current instruction couldn't be found in the image */
return ERROR_TRACE_INSTRUCTION_UNAVAILABLE;
}
- if (xscale->trace.core_state == ARMV4_5_STATE_ARM)
- {
- u8 buf[4];
- if ((retval = image_read_section(xscale->trace.image, section,
- xscale->trace.current_pc - xscale->trace.image->sections[section].base_address,
- 4, buf, &size_read)) != ERROR_OK)
- {
- LOG_ERROR("error while reading instruction: %i", retval);
+ if (xscale->trace.core_state == ARM_STATE_ARM) {
+ uint8_t buf[4];
+ retval = image_read_section(xscale->trace.image, section,
+ pc - xscale->trace.image->sections[section].base_address,
+ 4, buf, &size_read);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("error while reading instruction");
return ERROR_TRACE_INSTRUCTION_UNAVAILABLE;
}
opcode = target_buffer_get_u32(target, buf);
- arm_evaluate_opcode(opcode, xscale->trace.current_pc, instruction);
- }
- else if (xscale->trace.core_state == ARMV4_5_STATE_THUMB)
- {
- u8 buf[2];
- if ((retval = image_read_section(xscale->trace.image, section,
- xscale->trace.current_pc - xscale->trace.image->sections[section].base_address,
- 2, buf, &size_read)) != ERROR_OK)
- {
- LOG_ERROR("error while reading instruction: %i", retval);
+ arm_evaluate_opcode(opcode, pc, instruction);
+ } else if (xscale->trace.core_state == ARM_STATE_THUMB) {
+ uint8_t buf[2];
+ retval = image_read_section(xscale->trace.image, section,
+ pc - xscale->trace.image->sections[section].base_address,
+ 2, buf, &size_read);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("error while reading instruction");
return ERROR_TRACE_INSTRUCTION_UNAVAILABLE;
}
opcode = target_buffer_get_u16(target, buf);
- thumb_evaluate_opcode(opcode, xscale->trace.current_pc, instruction);
- }
- else
- {
+ thumb_evaluate_opcode(opcode, pc, instruction);
+ } else {
LOG_ERROR("BUG: unknown core state encountered");
exit(-1);
}
return ERROR_OK;
}
-int xscale_branch_address(xscale_trace_data_t *trace_data, int i, u32 *target)
+/* Extract address encoded into trace data.
+ * Write result to address referenced by argument 'target', or 0 if incomplete. */
+static inline void xscale_branch_address(struct xscale_trace_data *trace_data,
+ int i, uint32_t *target)
{
/* if there are less than four entries prior to the indirect branch message
* we can't extract the address */
if (i < 4)
- {
- return -1;
+ *target = 0;
+ else {
+ *target = (trace_data->entries[i-1].data) | (trace_data->entries[i-2].data << 8) |
+ (trace_data->entries[i-3].data << 16) | (trace_data->entries[i-4].data << 24);
}
+}
- *target = (trace_data->entries[i-1].data) | (trace_data->entries[i-2].data << 8) |
- (trace_data->entries[i-3].data << 16) | (trace_data->entries[i-4].data << 24);
-
- return 0;
+static inline void xscale_display_instruction(struct target *target, uint32_t pc,
+ struct arm_instruction *instruction,
+ struct command_context *cmd_ctx)
+{
+ int retval = xscale_read_instruction(target, pc, instruction);
+ if (retval == ERROR_OK)
+ command_print(cmd_ctx, "%s", instruction->text);
+ else
+ command_print(cmd_ctx, "0x%8.8" PRIx32 "\t<not found in image>", pc);
}
-int xscale_analyze_trace(target_t *target, command_context_t *cmd_ctx)
+static int xscale_analyze_trace(struct target *target, struct command_context *cmd_ctx)
{
- /* get pointers to arch-specific information */
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
- int next_pc_ok = 0;
- u32 next_pc = 0x0;
- xscale_trace_data_t *trace_data = xscale->trace.data;
- int retval;
+ struct xscale_common *xscale = target_to_xscale(target);
+ struct xscale_trace_data *trace_data = xscale->trace.data;
+ int i, retval;
+ uint32_t breakpoint_pc;
+ struct arm_instruction instruction;
+ uint32_t current_pc = 0;/* initialized when address determined */
- while (trace_data)
- {
- int i, chkpt;
- int rollover;
- int branch;
- int exception;
- xscale->trace.core_state = ARMV4_5_STATE_ARM;
+ if (!xscale->trace.image)
+ LOG_WARNING("No trace image loaded; use 'xscale trace_image'");
- chkpt = 0;
- rollover = 0;
+ /* loop for each trace buffer that was loaded from target */
+ while (trace_data) {
+ int chkpt = 0; /* incremented as checkpointed entries found */
+ int j;
- for (i = 0; i < trace_data->depth; i++)
- {
- next_pc_ok = 0;
- branch = 0;
- exception = 0;
+ /* FIXME: set this to correct mode when trace buffer is first enabled */
+ xscale->trace.core_state = ARM_STATE_ARM;
+
+ /* loop for each entry in this trace buffer */
+ for (i = 0; i < trace_data->depth; i++) {
+ int exception = 0;
+ uint32_t chkpt_reg = 0x0;
+ uint32_t branch_target = 0;
+ int count;
+ /* trace entry type is upper nybble of 'message byte' */
+ int trace_msg_type = (trace_data->entries[i].data & 0xf0) >> 4;
+
+ /* Target addresses of indirect branches are written into buffer
+ * before the message byte representing the branch. Skip past it */
if (trace_data->entries[i].type == XSCALE_TRACE_ADDRESS)
continue;
- switch ((trace_data->entries[i].data & 0xf0) >> 4)
- {
- case 0: /* Exceptions */
+ switch (trace_msg_type) {
+ case 0: /* Exceptions */
case 1:
case 2:
case 3:
case 6:
case 7:
exception = (trace_data->entries[i].data & 0x70) >> 4;
- next_pc_ok = 1;
- next_pc = (trace_data->entries[i].data & 0xf0) >> 2;
- command_print(cmd_ctx, "--- exception %i ---", (trace_data->entries[i].data & 0xf0) >> 4);
+
+ /* FIXME: vector table may be at ffff0000 */
+ branch_target = (trace_data->entries[i].data & 0xf0) >> 2;
break;
- case 8: /* Direct Branch */
- branch = 1;
+
+ case 8: /* Direct Branch */
break;
- case 9: /* Indirect Branch */
- branch = 1;
- if (xscale_branch_address(trace_data, i, &next_pc) == 0)
- {
- next_pc_ok = 1;
- }
+
+ case 9: /* Indirect Branch */
+ xscale_branch_address(trace_data, i, &branch_target);
break;
+
case 13: /* Checkpointed Indirect Branch */
- if (xscale_branch_address(trace_data, i, &next_pc) == 0)
- {
- next_pc_ok = 1;
- if (((chkpt == 0) && (next_pc != trace_data->chkpt0))
- || ((chkpt == 1) && (next_pc != trace_data->chkpt1)))
- LOG_WARNING("checkpointed indirect branch target address doesn't match checkpoint");
- }
- /* explicit fall-through */
+ xscale_branch_address(trace_data, i, &branch_target);
+ if ((trace_data->num_checkpoints == 2) && (chkpt == 0))
+ chkpt_reg = trace_data->chkpt1; /* 2 chkpts, this is
+ *oldest */
+ else
+ chkpt_reg = trace_data->chkpt0; /* 1 chkpt, or 2 and
+ *newest */
+
+ chkpt++;
+ break;
+
case 12: /* Checkpointed Direct Branch */
- branch = 1;
- if (chkpt == 0)
- {
- next_pc_ok = 1;
- next_pc = trace_data->chkpt0;
- chkpt++;
- }
- else if (chkpt == 1)
- {
- next_pc_ok = 1;
- next_pc = trace_data->chkpt0;
- chkpt++;
- }
+ if ((trace_data->num_checkpoints == 2) && (chkpt == 0))
+ chkpt_reg = trace_data->chkpt1; /* 2 chkpts, this is
+ *oldest */
else
- {
- LOG_WARNING("more than two checkpointed branches encountered");
- }
+ chkpt_reg = trace_data->chkpt0; /* 1 chkpt, or 2 and
+ *newest */
+
+ /* if no current_pc, checkpoint will be starting point */
+ if (current_pc == 0)
+ branch_target = chkpt_reg;
+
+ chkpt++;
break;
- case 15: /* Roll-over */
- rollover++;
+
+ case 15:/* Roll-over */
+ break;
+
+ default:/* Reserved */
+ LOG_WARNING("trace is suspect: invalid trace message byte");
continue;
- default: /* Reserved */
- command_print(cmd_ctx, "--- reserved trace message ---");
- LOG_ERROR("BUG: trace message %i is reserved", (trace_data->entries[i].data & 0xf0) >> 4);
- return ERROR_OK;
- }
- if (xscale->trace.pc_ok)
- {
- int executed = (trace_data->entries[i].data & 0xf) + rollover * 16;
- arm_instruction_t instruction;
+ }
- if ((exception == 6) || (exception == 7))
- {
- /* IRQ or FIQ exception, no instruction executed */
- executed -= 1;
- }
+ /* If we don't have the current_pc yet, but we did get the branch target
+ * (either from the trace buffer on indirect branch, or from a checkpoint reg),
+ * then we can start displaying instructions at the next iteration, with
+ * branch_target as the starting point.
+ */
+ if (current_pc == 0) {
+ current_pc = branch_target; /* remains 0 unless branch_target *obtained */
+ continue;
+ }
- while (executed-- >= 0)
- {
- if ((retval = xscale_read_instruction(target, &instruction)) != ERROR_OK)
- {
- /* can't continue tracing with no image available */
- if (retval == ERROR_TRACE_IMAGE_UNAVAILABLE)
- {
- return retval;
- }
- else if (retval == ERROR_TRACE_INSTRUCTION_UNAVAILABLE)
- {
- /* TODO: handle incomplete images */
- }
- }
-
- /* a precise abort on a load to the PC is included in the incremental
- * word count, other instructions causing data aborts are not included
- */
- if ((executed == 0) && (exception == 4)
- && ((instruction.type >= ARM_LDR) && (instruction.type <= ARM_LDM)))
- {
- if ((instruction.type == ARM_LDM)
- && ((instruction.info.load_store_multiple.register_list & 0x8000) == 0))
- {
- executed--;
- }
- else if (((instruction.type >= ARM_LDR) && (instruction.type <= ARM_LDRSH))
- && (instruction.info.load_store.Rd != 15))
- {
- executed--;
- }
- }
-
- /* only the last instruction executed
- * (the one that caused the control flow change)
- * could be a taken branch
- */
- if (((executed == -1) && (branch == 1)) &&
- (((instruction.type == ARM_B) ||
- (instruction.type == ARM_BL) ||
- (instruction.type == ARM_BLX)) &&
- (instruction.info.b_bl_bx_blx.target_address != -1)))
- {
- xscale->trace.current_pc = instruction.info.b_bl_bx_blx.target_address;
- }
- else
- {
- xscale->trace.current_pc += (xscale->trace.core_state == ARMV4_5_STATE_ARM) ? 4 : 2;
- }
- command_print(cmd_ctx, "%s", instruction.text);
- }
+ /* We have current_pc. Read and display the instructions from the image.
+ * First, display count instructions (lower nybble of message byte). */
+ count = trace_data->entries[i].data & 0x0f;
+ for (j = 0; j < count; j++) {
+ xscale_display_instruction(target, current_pc, &instruction,
+ cmd_ctx);
+ current_pc += xscale->trace.core_state == ARM_STATE_ARM ? 4 : 2;
+ }
- rollover = 0;
+ /* An additional instruction is implicitly added to count for
+ * rollover and some exceptions: undef, swi, prefetch abort. */
+ if ((trace_msg_type == 15) || (exception > 0 && exception < 4)) {
+ xscale_display_instruction(target, current_pc, &instruction,
+ cmd_ctx);
+ current_pc += xscale->trace.core_state == ARM_STATE_ARM ? 4 : 2;
}
- if (next_pc_ok)
- {
- xscale->trace.current_pc = next_pc;
- xscale->trace.pc_ok = 1;
+ if (trace_msg_type == 15) /* rollover */
+ continue;
+
+ if (exception) {
+ command_print(cmd_ctx, "--- exception %i ---", exception);
+ continue;
}
- }
- for (; xscale->trace.current_pc < trace_data->last_instruction; xscale->trace.current_pc += (xscale->trace.core_state == ARMV4_5_STATE_ARM) ? 4 : 2)
- {
- arm_instruction_t instruction;
- if ((retval = xscale_read_instruction(target, &instruction)) != ERROR_OK)
- {
- /* can't continue tracing with no image available */
- if (retval == ERROR_TRACE_IMAGE_UNAVAILABLE)
- {
- return retval;
- }
- else if (retval == ERROR_TRACE_INSTRUCTION_UNAVAILABLE)
- {
- /* TODO: handle incomplete images */
+ /* not exception or rollover; next instruction is a branch and is
+ * not included in the count */
+ xscale_display_instruction(target, current_pc, &instruction, cmd_ctx);
+
+ /* for direct branches, extract branch destination from instruction */
+ if ((trace_msg_type == 8) || (trace_msg_type == 12)) {
+ retval = xscale_read_instruction(target, current_pc, &instruction);
+ if (retval == ERROR_OK)
+ current_pc = instruction.info.b_bl_bx_blx.target_address;
+ else
+ current_pc = 0; /* branch destination unknown */
+
+ /* direct branch w/ checkpoint; can also get from checkpoint reg */
+ if (trace_msg_type == 12) {
+ if (current_pc == 0)
+ current_pc = chkpt_reg;
+ else if (current_pc != chkpt_reg) /* sanity check */
+ LOG_WARNING("trace is suspect: checkpoint register "
+ "inconsistent with adddress from image");
}
+
+ if (current_pc == 0)
+ command_print(cmd_ctx, "address unknown");
+
+ continue;
}
- command_print(cmd_ctx, "%s", instruction.text);
- }
+ /* indirect branch; the branch destination was read from trace buffer */
+ if ((trace_msg_type == 9) || (trace_msg_type == 13)) {
+ current_pc = branch_target;
+
+ /* sanity check (checkpoint reg is redundant) */
+ if ((trace_msg_type == 13) && (chkpt_reg != branch_target))
+ LOG_WARNING("trace is suspect: checkpoint register "
+ "inconsistent with address from trace buffer");
+ }
+
+ } /* END: for (i = 0; i < trace_data->depth; i++) */
+
+ breakpoint_pc = trace_data->last_instruction; /* used below */
trace_data = trace_data->next;
+
+ } /* END: while (trace_data) */
+
+ /* Finally... display all instructions up to the value of the pc when the
+ * debug break occurred (saved when trace data was collected from target).
+ * This is necessary because the trace only records execution branches and 16
+ * consecutive instructions (rollovers), so last few typically missed.
+ */
+ if (current_pc == 0)
+ return ERROR_OK;/* current_pc was never found */
+
+ /* how many instructions remaining? */
+ int gap_count = (breakpoint_pc - current_pc) /
+ (xscale->trace.core_state == ARM_STATE_ARM ? 4 : 2);
+
+ /* should never be negative or over 16, but verify */
+ if (gap_count < 0 || gap_count > 16) {
+ LOG_WARNING("trace is suspect: excessive gap at end of trace");
+ return ERROR_OK;/* bail; large number or negative value no good */
+ }
+
+ /* display remaining instructions */
+ for (i = 0; i < gap_count; i++) {
+ xscale_display_instruction(target, current_pc, &instruction, cmd_ctx);
+ current_pc += xscale->trace.core_state == ARM_STATE_ARM ? 4 : 2;
}
return ERROR_OK;
}
-void xscale_build_reg_cache(target_t *target)
-{
- /* get pointers to arch-specific information */
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
+static const struct reg_arch_type xscale_reg_type = {
+ .get = xscale_get_reg,
+ .set = xscale_set_reg,
+};
- reg_cache_t **cache_p = register_get_last_cache_p(&target->reg_cache);
- xscale_reg_t *arch_info = malloc(sizeof(xscale_reg_arch_info));
+static void xscale_build_reg_cache(struct target *target)
+{
+ struct xscale_common *xscale = target_to_xscale(target);
+ struct arm *arm = &xscale->arm;
+ struct reg_cache **cache_p = register_get_last_cache_p(&target->reg_cache);
+ struct xscale_reg *arch_info = malloc(sizeof(xscale_reg_arch_info));
int i;
- int num_regs = sizeof(xscale_reg_arch_info) / sizeof(xscale_reg_t);
+ int num_regs = ARRAY_SIZE(xscale_reg_arch_info);
- (*cache_p) = armv4_5_build_reg_cache(target, armv4_5);
- armv4_5->core_cache = (*cache_p);
+ (*cache_p) = arm_build_reg_cache(target, arm);
- /* register a register arch-type for XScale dbg registers only once */
- if (xscale_reg_arch_type == -1)
- xscale_reg_arch_type = register_reg_arch_type(xscale_get_reg, xscale_set_reg);
-
- (*cache_p)->next = malloc(sizeof(reg_cache_t));
+ (*cache_p)->next = malloc(sizeof(struct reg_cache));
cache_p = &(*cache_p)->next;
/* fill in values for the xscale reg cache */
(*cache_p)->name = "XScale registers";
(*cache_p)->next = NULL;
- (*cache_p)->reg_list = malloc(num_regs * sizeof(reg_t));
+ (*cache_p)->reg_list = malloc(num_regs * sizeof(struct reg));
(*cache_p)->num_regs = num_regs;
- for (i = 0; i < num_regs; i++)
- {
+ for (i = 0; i < num_regs; i++) {
(*cache_p)->reg_list[i].name = xscale_reg_list[i];
(*cache_p)->reg_list[i].value = calloc(4, 1);
(*cache_p)->reg_list[i].dirty = 0;
(*cache_p)->reg_list[i].valid = 0;
(*cache_p)->reg_list[i].size = 32;
- (*cache_p)->reg_list[i].bitfield_desc = NULL;
- (*cache_p)->reg_list[i].num_bitfields = 0;
(*cache_p)->reg_list[i].arch_info = &arch_info[i];
- (*cache_p)->reg_list[i].arch_type = xscale_reg_arch_type;
+ (*cache_p)->reg_list[i].type = &xscale_reg_type;
arch_info[i] = xscale_reg_arch_info[i];
arch_info[i].target = target;
}
xscale->reg_cache = (*cache_p);
}
-int xscale_init_target(struct command_context_s *cmd_ctx, struct target_s *target)
+static int xscale_init_target(struct command_context *cmd_ctx,
+ struct target *target)
{
+ xscale_build_reg_cache(target);
return ERROR_OK;
}
-int xscale_quit(void)
-{
-
- return ERROR_OK;
-}
-
-int xscale_init_arch_info(target_t *target, xscale_common_t *xscale, int chain_pos, const char *variant)
+static int xscale_init_arch_info(struct target *target,
+ struct xscale_common *xscale, struct jtag_tap *tap, const char *variant)
{
- armv4_5_common_t *armv4_5;
- u32 high_reset_branch, low_reset_branch;
+ struct arm *arm;
+ uint32_t high_reset_branch, low_reset_branch;
int i;
- armv4_5 = &xscale->armv4_5_common;
+ arm = &xscale->arm;
- /* store architecture specfic data (none so far) */
- xscale->arch_info = NULL;
+ /* store architecture specfic data */
xscale->common_magic = XSCALE_COMMON_MAGIC;
- /* remember the variant (PXA25x, PXA27x, IXP42x, ...) */
- xscale->variant = strdup(variant);
-
- /* prepare JTAG information for the new target */
- xscale->jtag_info.chain_pos = chain_pos;
-
- xscale->jtag_info.dbgrx = 0x02;
- xscale->jtag_info.dbgtx = 0x10;
- xscale->jtag_info.dcsr = 0x09;
- xscale->jtag_info.ldic = 0x07;
+ /* we don't really *need* a variant param ... */
+ if (variant) {
+ int ir_length = 0;
+
+ if (strcmp(variant, "pxa250") == 0
+ || strcmp(variant, "pxa255") == 0
+ || strcmp(variant, "pxa26x") == 0)
+ ir_length = 5;
+ else if (strcmp(variant, "pxa27x") == 0
+ || strcmp(variant, "ixp42x") == 0
+ || strcmp(variant, "ixp45x") == 0
+ || strcmp(variant, "ixp46x") == 0)
+ ir_length = 7;
+ else if (strcmp(variant, "pxa3xx") == 0)
+ ir_length = 11;
+ else
+ LOG_WARNING("%s: unrecognized variant %s",
+ tap->dotted_name, variant);
- if ((strcmp(xscale->variant, "pxa250") == 0) ||
- (strcmp(xscale->variant, "pxa255") == 0) ||
- (strcmp(xscale->variant, "pxa26x") == 0))
- {
- xscale->jtag_info.ir_length = 5;
- }
- else if ((strcmp(xscale->variant, "pxa27x") == 0) ||
- (strcmp(xscale->variant, "ixp42x") == 0) ||
- (strcmp(xscale->variant, "ixp45x") == 0) ||
- (strcmp(xscale->variant, "ixp46x") == 0))
- {
- xscale->jtag_info.ir_length = 7;
+ if (ir_length && ir_length != tap->ir_length) {
+ LOG_WARNING("%s: IR length for %s is %d; fixing",
+ tap->dotted_name, variant, ir_length);
+ tap->ir_length = ir_length;
+ }
}
+ /* PXA3xx shifts the JTAG instructions */
+ if (tap->ir_length == 11)
+ xscale->xscale_variant = XSCALE_PXA3XX;
+ else
+ xscale->xscale_variant = XSCALE_IXP4XX_PXA2XX;
+
/* the debug handler isn't installed (and thus not running) at this time */
- xscale->handler_installed = 0;
- xscale->handler_running = 0;
xscale->handler_address = 0xfe000800;
/* clear the vectors we keep locally for reference */
xscale->low_vectors[0] = ARMV4_5_B((low_reset_branch & 0xffffff), 0);
xscale->high_vectors[0] = ARMV4_5_B((high_reset_branch & 0xffffff), 0);
- for (i = 1; i <= 7; i++)
- {
+ for (i = 1; i <= 7; i++) {
xscale->low_vectors[i] = ARMV4_5_B(0xfffffe, 0);
xscale->high_vectors[i] = ARMV4_5_B(0xfffffe, 0);
}
xscale->dbr0_used = 0;
xscale->dbr1_used = 0;
+ LOG_INFO("%s: hardware has 2 breakpoints and 2 watchpoints",
+ target_name(target));
+
xscale->arm_bkpt = ARMV5_BKPT(0x0);
xscale->thumb_bkpt = ARMV5_T_BKPT(0x0) & 0xffff;
xscale->vector_catch = 0x1;
- xscale->trace.capture_status = TRACE_IDLE;
xscale->trace.data = NULL;
xscale->trace.image = NULL;
- xscale->trace.buffer_enabled = 0;
+ xscale->trace.mode = XSCALE_TRACE_DISABLED;
xscale->trace.buffer_fill = 0;
+ xscale->trace.fill_counter = 0;
/* prepare ARMv4/5 specific information */
- armv4_5->arch_info = xscale;
- armv4_5->read_core_reg = xscale_read_core_reg;
- armv4_5->write_core_reg = xscale_write_core_reg;
- armv4_5->full_context = xscale_full_context;
+ arm->arch_info = xscale;
+ arm->core_type = ARM_MODE_ANY;
+ arm->read_core_reg = xscale_read_core_reg;
+ arm->write_core_reg = xscale_write_core_reg;
+ arm->full_context = xscale_full_context;
- armv4_5_init_arch_info(target, armv4_5);
+ arm_init_arch_info(target, arm);
xscale->armv4_5_mmu.armv4_5_cache.ctype = -1;
xscale->armv4_5_mmu.get_ttb = xscale_get_ttb;
return ERROR_OK;
}
-/* target xscale <endianess> <startup_mode> <chain_pos> <variant> */
-int xscale_target_create(struct target_s *target, Jim_Interp *interp)
+static int xscale_target_create(struct target *target, Jim_Interp *interp)
{
- xscale_common_t *xscale = calloc(1,sizeof(xscale_common_t));
+ struct xscale_common *xscale;
- xscale_init_arch_info(target, xscale, target->chain_position, target->variant);
- xscale_build_reg_cache(target);
+ if (sizeof xscale_debug_handler - 1 > 0x800) {
+ LOG_ERROR("debug_handler.bin: larger than 2kb");
+ return ERROR_FAIL;
+ }
- return ERROR_OK;
+ xscale = calloc(1, sizeof(*xscale));
+ if (!xscale)
+ return ERROR_FAIL;
+
+ return xscale_init_arch_info(target, xscale, target->tap,
+ target->variant);
}
-int xscale_handle_debug_handler_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+COMMAND_HANDLER(xscale_handle_debug_handler_command)
{
- target_t *target = NULL;
- armv4_5_common_t *armv4_5;
- xscale_common_t *xscale;
-
- u32 handler_address;
+ struct target *target = NULL;
+ struct xscale_common *xscale;
+ int retval;
+ uint32_t handler_address;
- if (argc < 2)
- {
- LOG_ERROR("'xscale debug_handler <target#> <address>' command takes two required operands");
- return ERROR_OK;
- }
+ if (CMD_ARGC < 2)
+ return ERROR_COMMAND_SYNTAX_ERROR;
- if ((target = get_target_by_num(strtoul(args[0], NULL, 0))) == NULL)
- {
- LOG_ERROR("no target '%s' configured", args[0]);
+ target = get_target(CMD_ARGV[0]);
+ if (target == NULL) {
+ LOG_ERROR("target '%s' not defined", CMD_ARGV[0]);
return ERROR_FAIL;
}
- if (xscale_get_arch_pointers(target, &armv4_5, &xscale) != ERROR_OK)
- {
- return ERROR_FAIL;
- }
+ xscale = target_to_xscale(target);
+ retval = xscale_verify_pointer(CMD_CTX, xscale);
+ if (retval != ERROR_OK)
+ return retval;
- handler_address = strtoul(args[1], NULL, 0);
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], handler_address);
if (((handler_address >= 0x800) && (handler_address <= 0x1fef800)) ||
((handler_address >= 0xfe000800) && (handler_address <= 0xfffff800)))
- {
xscale->handler_address = handler_address;
- }
- else
- {
- LOG_ERROR("xscale debug_handler <address> must be between 0x800 and 0x1fef800 or between 0xfe000800 and 0xfffff800");
+ else {
+ LOG_ERROR(
+ "xscale debug_handler <address> must be between 0x800 and 0x1fef800 or between 0xfe000800 and 0xfffff800");
return ERROR_FAIL;
}
return ERROR_OK;
}
-int xscale_handle_cache_clean_address_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+COMMAND_HANDLER(xscale_handle_cache_clean_address_command)
{
- target_t *target = NULL;
- armv4_5_common_t *armv4_5;
- xscale_common_t *xscale;
-
- u32 cache_clean_address;
+ struct target *target = NULL;
+ struct xscale_common *xscale;
+ int retval;
+ uint32_t cache_clean_address;
- if (argc < 2)
- {
+ if (CMD_ARGC < 2)
return ERROR_COMMAND_SYNTAX_ERROR;
- }
-
- if ((target = get_target_by_num(strtoul(args[0], NULL, 0))) == NULL)
- {
- LOG_ERROR("no target '%s' configured", args[0]);
- return ERROR_FAIL;
- }
- if (xscale_get_arch_pointers(target, &armv4_5, &xscale) != ERROR_OK)
- {
+ target = get_target(CMD_ARGV[0]);
+ if (target == NULL) {
+ LOG_ERROR("target '%s' not defined", CMD_ARGV[0]);
return ERROR_FAIL;
}
+ xscale = target_to_xscale(target);
+ retval = xscale_verify_pointer(CMD_CTX, xscale);
+ if (retval != ERROR_OK)
+ return retval;
- cache_clean_address = strtoul(args[1], NULL, 0);
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], cache_clean_address);
if (cache_clean_address & 0xffff)
- {
LOG_ERROR("xscale cache_clean_address <address> must be 64kb aligned");
- }
else
- {
xscale->cache_clean_address = cache_clean_address;
- }
return ERROR_OK;
}
-int xscale_handle_cache_info_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+COMMAND_HANDLER(xscale_handle_cache_info_command)
{
- target_t *target = get_current_target(cmd_ctx);
- armv4_5_common_t *armv4_5;
- xscale_common_t *xscale;
+ struct target *target = get_current_target(CMD_CTX);
+ struct xscale_common *xscale = target_to_xscale(target);
+ int retval;
- if (xscale_get_arch_pointers(target, &armv4_5, &xscale) != ERROR_OK)
- {
- return ERROR_OK;
- }
+ retval = xscale_verify_pointer(CMD_CTX, xscale);
+ if (retval != ERROR_OK)
+ return retval;
- return armv4_5_handle_cache_info_command(cmd_ctx, &xscale->armv4_5_mmu.armv4_5_cache);
+ return armv4_5_handle_cache_info_command(CMD_CTX, &xscale->armv4_5_mmu.armv4_5_cache);
}
-static int xscale_virt2phys(struct target_s *target, u32 virtual, u32 *physical)
+static int xscale_virt2phys(struct target *target,
+ uint32_t virtual, uint32_t *physical)
{
- armv4_5_common_t *armv4_5;
- xscale_common_t *xscale;
- int retval;
- int type;
- u32 cb;
- int domain;
- u32 ap;
+ struct xscale_common *xscale = target_to_xscale(target);
+ uint32_t cb;
+ if (xscale->common_magic != XSCALE_COMMON_MAGIC) {
+ LOG_ERROR(xscale_not);
+ return ERROR_TARGET_INVALID;
+ }
- if ((retval = xscale_get_arch_pointers(target, &armv4_5, &xscale)) != ERROR_OK)
- {
+ uint32_t ret;
+ int retval = armv4_5_mmu_translate_va(target, &xscale->armv4_5_mmu,
+ virtual, &cb, &ret);
+ if (retval != ERROR_OK)
return retval;
- }
- u32 ret = armv4_5_mmu_translate_va(target, &xscale->armv4_5_mmu, virtual, &type, &cb, &domain, &ap);
- if (type == -1)
- {
- return ret;
- }
*physical = ret;
return ERROR_OK;
}
-static int xscale_mmu(struct target_s *target, int *enabled)
+static int xscale_mmu(struct target *target, int *enabled)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- xscale_common_t *xscale = armv4_5->arch_info;
+ struct xscale_common *xscale = target_to_xscale(target);
- if (target->state != TARGET_HALTED)
- {
+ if (target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_INVALID;
}
return ERROR_OK;
}
-
-int xscale_handle_mmu_command(command_context_t *cmd_ctx, char *cmd, char **args, int argc)
+COMMAND_HANDLER(xscale_handle_mmu_command)
{
- target_t *target = get_current_target(cmd_ctx);
- armv4_5_common_t *armv4_5;
- xscale_common_t *xscale;
+ struct target *target = get_current_target(CMD_CTX);
+ struct xscale_common *xscale = target_to_xscale(target);
+ int retval;
- if (xscale_get_arch_pointers(target, &armv4_5, &xscale) != ERROR_OK)
- {
- return ERROR_OK;
- }
+ retval = xscale_verify_pointer(CMD_CTX, xscale);
+ if (retval != ERROR_OK)
+ return retval;
- if (target->state != TARGET_HALTED)
- {
- command_print(cmd_ctx, "target must be stopped for \"%s\" command", cmd);
+ if (target->state != TARGET_HALTED) {
+ command_print(CMD_CTX, "target must be stopped for \"%s\" command", CMD_NAME);
return ERROR_OK;
}
- if (argc >= 1)
- {
- if (strcmp("enable", args[0]) == 0)
- {
+ if (CMD_ARGC >= 1) {
+ bool enable;
+ COMMAND_PARSE_ENABLE(CMD_ARGV[0], enable);
+ if (enable)
xscale_enable_mmu_caches(target, 1, 0, 0);
- xscale->armv4_5_mmu.mmu_enabled = 1;
- }
- else if (strcmp("disable", args[0]) == 0)
- {
+ else
xscale_disable_mmu_caches(target, 1, 0, 0);
- xscale->armv4_5_mmu.mmu_enabled = 0;
- }
+ xscale->armv4_5_mmu.mmu_enabled = enable;
}
- command_print(cmd_ctx, "mmu %s", (xscale->armv4_5_mmu.mmu_enabled) ? "enabled" : "disabled");
+ command_print(CMD_CTX, "mmu %s",
+ (xscale->armv4_5_mmu.mmu_enabled) ? "enabled" : "disabled");
return ERROR_OK;
}
-int xscale_handle_idcache_command(command_context_t *cmd_ctx, char *cmd, char **args, int argc)
+COMMAND_HANDLER(xscale_handle_idcache_command)
{
- target_t *target = get_current_target(cmd_ctx);
- armv4_5_common_t *armv4_5;
- xscale_common_t *xscale;
- int icache = 0, dcache = 0;
+ struct target *target = get_current_target(CMD_CTX);
+ struct xscale_common *xscale = target_to_xscale(target);
- if (xscale_get_arch_pointers(target, &armv4_5, &xscale) != ERROR_OK)
- {
+ int retval = xscale_verify_pointer(CMD_CTX, xscale);
+ if (retval != ERROR_OK)
+ return retval;
+
+ if (target->state != TARGET_HALTED) {
+ command_print(CMD_CTX, "target must be stopped for \"%s\" command", CMD_NAME);
return ERROR_OK;
}
- if (target->state != TARGET_HALTED)
- {
- command_print(cmd_ctx, "target must be stopped for \"%s\" command", cmd);
- return ERROR_OK;
+ bool icache = false;
+ if (strcmp(CMD_NAME, "icache") == 0)
+ icache = true;
+ if (CMD_ARGC >= 1) {
+ bool enable;
+ COMMAND_PARSE_ENABLE(CMD_ARGV[0], enable);
+ if (icache) {
+ xscale->armv4_5_mmu.armv4_5_cache.i_cache_enabled = enable;
+ if (enable)
+ xscale_enable_mmu_caches(target, 0, 0, 1);
+ else
+ xscale_disable_mmu_caches(target, 0, 0, 1);
+ } else {
+ xscale->armv4_5_mmu.armv4_5_cache.d_u_cache_enabled = enable;
+ if (enable)
+ xscale_enable_mmu_caches(target, 0, 1, 0);
+ else
+ xscale_disable_mmu_caches(target, 0, 1, 0);
+ }
}
- if (strcmp(cmd, "icache") == 0)
- icache = 1;
- else if (strcmp(cmd, "dcache") == 0)
- dcache = 1;
+ bool enabled = icache ?
+ xscale->armv4_5_mmu.armv4_5_cache.i_cache_enabled :
+ xscale->armv4_5_mmu.armv4_5_cache.d_u_cache_enabled;
+ const char *msg = enabled ? "enabled" : "disabled";
+ command_print(CMD_CTX, "%s %s", CMD_NAME, msg);
- if (argc >= 1)
- {
- if (strcmp("enable", args[0]) == 0)
- {
- xscale_enable_mmu_caches(target, 0, dcache, icache);
-
- if (icache)
- xscale->armv4_5_mmu.armv4_5_cache.i_cache_enabled = 1;
- else if (dcache)
- xscale->armv4_5_mmu.armv4_5_cache.d_u_cache_enabled = 1;
+ return ERROR_OK;
+}
+
+static const struct {
+ char name[15];
+ unsigned mask;
+} vec_ids[] = {
+ { "fiq", DCSR_TF, },
+ { "irq", DCSR_TI, },
+ { "dabt", DCSR_TD, },
+ { "pabt", DCSR_TA, },
+ { "swi", DCSR_TS, },
+ { "undef", DCSR_TU, },
+ { "reset", DCSR_TR, },
+};
+
+COMMAND_HANDLER(xscale_handle_vector_catch_command)
+{
+ struct target *target = get_current_target(CMD_CTX);
+ struct xscale_common *xscale = target_to_xscale(target);
+ int retval;
+ uint32_t dcsr_value;
+ uint32_t catch = 0;
+ struct reg *dcsr_reg = &xscale->reg_cache->reg_list[XSCALE_DCSR];
+
+ retval = xscale_verify_pointer(CMD_CTX, xscale);
+ if (retval != ERROR_OK)
+ return retval;
+
+ dcsr_value = buf_get_u32(dcsr_reg->value, 0, 32);
+ if (CMD_ARGC > 0) {
+ if (CMD_ARGC == 1) {
+ if (strcmp(CMD_ARGV[0], "all") == 0) {
+ catch = DCSR_TRAP_MASK;
+ CMD_ARGC--;
+ } else if (strcmp(CMD_ARGV[0], "none") == 0) {
+ catch = 0;
+ CMD_ARGC--;
+ }
}
- else if (strcmp("disable", args[0]) == 0)
- {
- xscale_disable_mmu_caches(target, 0, dcache, icache);
-
- if (icache)
- xscale->armv4_5_mmu.armv4_5_cache.i_cache_enabled = 0;
- else if (dcache)
- xscale->armv4_5_mmu.armv4_5_cache.d_u_cache_enabled = 0;
+ while (CMD_ARGC-- > 0) {
+ unsigned i;
+ for (i = 0; i < ARRAY_SIZE(vec_ids); i++) {
+ if (strcmp(CMD_ARGV[CMD_ARGC], vec_ids[i].name))
+ continue;
+ catch |= vec_ids[i].mask;
+ break;
+ }
+ if (i == ARRAY_SIZE(vec_ids)) {
+ LOG_ERROR("No vector '%s'", CMD_ARGV[CMD_ARGC]);
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
}
+ *(uint32_t *)(dcsr_reg->value) &= ~DCSR_TRAP_MASK;
+ *(uint32_t *)(dcsr_reg->value) |= catch;
+ xscale_write_dcsr(target, -1, -1);
}
- if (icache)
- command_print(cmd_ctx, "icache %s", (xscale->armv4_5_mmu.armv4_5_cache.i_cache_enabled) ? "enabled" : "disabled");
-
- if (dcache)
- command_print(cmd_ctx, "dcache %s", (xscale->armv4_5_mmu.armv4_5_cache.d_u_cache_enabled) ? "enabled" : "disabled");
+ dcsr_value = buf_get_u32(dcsr_reg->value, 0, 32);
+ for (unsigned i = 0; i < ARRAY_SIZE(vec_ids); i++) {
+ command_print(CMD_CTX, "%15s: %s", vec_ids[i].name,
+ (dcsr_value & vec_ids[i].mask) ? "catch" : "ignore");
+ }
return ERROR_OK;
}
-int xscale_handle_vector_catch_command(command_context_t *cmd_ctx, char *cmd, char **args, int argc)
+
+COMMAND_HANDLER(xscale_handle_vector_table_command)
{
- target_t *target = get_current_target(cmd_ctx);
- armv4_5_common_t *armv4_5;
- xscale_common_t *xscale;
+ struct target *target = get_current_target(CMD_CTX);
+ struct xscale_common *xscale = target_to_xscale(target);
+ int err = 0;
+ int retval;
- if (xscale_get_arch_pointers(target, &armv4_5, &xscale) != ERROR_OK)
- {
+ retval = xscale_verify_pointer(CMD_CTX, xscale);
+ if (retval != ERROR_OK)
+ return retval;
+
+ if (CMD_ARGC == 0) { /* print current settings */
+ int idx;
+
+ command_print(CMD_CTX, "active user-set static vectors:");
+ for (idx = 1; idx < 8; idx++)
+ if (xscale->static_low_vectors_set & (1 << idx))
+ command_print(CMD_CTX,
+ "low %d: 0x%" PRIx32,
+ idx,
+ xscale->static_low_vectors[idx]);
+ for (idx = 1; idx < 8; idx++)
+ if (xscale->static_high_vectors_set & (1 << idx))
+ command_print(CMD_CTX,
+ "high %d: 0x%" PRIx32,
+ idx,
+ xscale->static_high_vectors[idx]);
return ERROR_OK;
}
- if (argc < 1)
- {
- command_print(cmd_ctx, "usage: xscale vector_catch [mask]");
- }
- else
- {
- xscale->vector_catch = strtoul(args[0], NULL, 0);
- buf_set_u32(xscale->reg_cache->reg_list[XSCALE_DCSR].value, 16, 8, xscale->vector_catch);
- xscale_write_dcsr(target, -1, -1);
+ if (CMD_ARGC != 3)
+ err = 1;
+ else {
+ int idx;
+ COMMAND_PARSE_NUMBER(int, CMD_ARGV[1], idx);
+ uint32_t vec;
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], vec);
+
+ if (idx < 1 || idx >= 8)
+ err = 1;
+
+ if (!err && strcmp(CMD_ARGV[0], "low") == 0) {
+ xscale->static_low_vectors_set |= (1<<idx);
+ xscale->static_low_vectors[idx] = vec;
+ } else if (!err && (strcmp(CMD_ARGV[0], "high") == 0)) {
+ xscale->static_high_vectors_set |= (1<<idx);
+ xscale->static_high_vectors[idx] = vec;
+ } else
+ err = 1;
}
- command_print(cmd_ctx, "vector catch mask: 0x%2.2x", xscale->vector_catch);
+ if (err)
+ return ERROR_COMMAND_SYNTAX_ERROR;
return ERROR_OK;
}
-int xscale_handle_trace_buffer_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+COMMAND_HANDLER(xscale_handle_trace_buffer_command)
{
- target_t *target = get_current_target(cmd_ctx);
- armv4_5_common_t *armv4_5;
- xscale_common_t *xscale;
- u32 dcsr_value;
+ struct target *target = get_current_target(CMD_CTX);
+ struct xscale_common *xscale = target_to_xscale(target);
+ uint32_t dcsr_value;
+ int retval;
- if (xscale_get_arch_pointers(target, &armv4_5, &xscale) != ERROR_OK)
- {
- return ERROR_OK;
- }
+ retval = xscale_verify_pointer(CMD_CTX, xscale);
+ if (retval != ERROR_OK)
+ return retval;
- if (target->state != TARGET_HALTED)
- {
- command_print(cmd_ctx, "target must be stopped for \"%s\" command", cmd);
+ if (target->state != TARGET_HALTED) {
+ command_print(CMD_CTX, "target must be stopped for \"%s\" command", CMD_NAME);
return ERROR_OK;
}
- if ((argc >= 1) && (strcmp("enable", args[0]) == 0))
- {
- xscale_trace_data_t *td, *next_td;
- xscale->trace.buffer_enabled = 1;
-
- /* free old trace data */
- td = xscale->trace.data;
- while (td)
- {
- next_td = td->next;
-
- if (td->entries)
- free(td->entries);
- free(td);
- td = next_td;
- }
- xscale->trace.data = NULL;
- }
- else if ((argc >= 1) && (strcmp("disable", args[0]) == 0))
- {
- xscale->trace.buffer_enabled = 0;
- }
-
- if ((argc >= 2) && (strcmp("fill", args[1]) == 0))
- {
- if (argc >= 3)
- xscale->trace.buffer_fill = strtoul(args[2], NULL, 0);
+ if (CMD_ARGC >= 1) {
+ if (strcmp("enable", CMD_ARGV[0]) == 0)
+ xscale->trace.mode = XSCALE_TRACE_WRAP; /* default */
+ else if (strcmp("disable", CMD_ARGV[0]) == 0)
+ xscale->trace.mode = XSCALE_TRACE_DISABLED;
else
- xscale->trace.buffer_fill = 1;
- }
- else if ((argc >= 2) && (strcmp("wrap", args[1]) == 0))
- {
- xscale->trace.buffer_fill = -1;
- }
-
- if (xscale->trace.buffer_enabled)
- {
- /* if we enable the trace buffer in fill-once
- * mode we know the address of the first instruction */
- xscale->trace.pc_ok = 1;
- xscale->trace.current_pc = buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32);
- }
- else
- {
- /* otherwise the address is unknown, and we have no known good PC */
- xscale->trace.pc_ok = 0;
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ if (CMD_ARGC >= 2 && xscale->trace.mode != XSCALE_TRACE_DISABLED) {
+ if (strcmp("fill", CMD_ARGV[1]) == 0) {
+ int buffcount = 1; /* default */
+ if (CMD_ARGC >= 3)
+ COMMAND_PARSE_NUMBER(int, CMD_ARGV[2], buffcount);
+ if (buffcount < 1) { /* invalid */
+ command_print(CMD_CTX, "fill buffer count must be > 0");
+ xscale->trace.mode = XSCALE_TRACE_DISABLED;
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+ xscale->trace.buffer_fill = buffcount;
+ xscale->trace.mode = XSCALE_TRACE_FILL;
+ } else if (strcmp("wrap", CMD_ARGV[1]) == 0)
+ xscale->trace.mode = XSCALE_TRACE_WRAP;
+ else {
+ xscale->trace.mode = XSCALE_TRACE_DISABLED;
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
}
- command_print(cmd_ctx, "trace buffer %s (%s)",
- (xscale->trace.buffer_enabled) ? "enabled" : "disabled",
- (xscale->trace.buffer_fill > 0) ? "fill" : "wrap");
+ if (xscale->trace.mode != XSCALE_TRACE_DISABLED) {
+ char fill_string[12];
+ sprintf(fill_string, "fill %d", xscale->trace.buffer_fill);
+ command_print(CMD_CTX, "trace buffer enabled (%s)",
+ (xscale->trace.mode == XSCALE_TRACE_FILL)
+ ? fill_string : "wrap");
+ } else
+ command_print(CMD_CTX, "trace buffer disabled");
dcsr_value = buf_get_u32(xscale->reg_cache->reg_list[XSCALE_DCSR].value, 0, 32);
- if (xscale->trace.buffer_fill >= 0)
+ if (xscale->trace.mode == XSCALE_TRACE_FILL)
xscale_write_dcsr_sw(target, (dcsr_value & 0xfffffffc) | 2);
else
xscale_write_dcsr_sw(target, dcsr_value & 0xfffffffc);
return ERROR_OK;
}
-int xscale_handle_trace_image_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+COMMAND_HANDLER(xscale_handle_trace_image_command)
{
- target_t *target;
- armv4_5_common_t *armv4_5;
- xscale_common_t *xscale;
-
- if (argc < 1)
- {
- command_print(cmd_ctx, "usage: xscale trace_image <file> [base address] [type]");
- return ERROR_OK;
- }
+ struct target *target = get_current_target(CMD_CTX);
+ struct xscale_common *xscale = target_to_xscale(target);
+ int retval;
- target = get_current_target(cmd_ctx);
+ if (CMD_ARGC < 1)
+ return ERROR_COMMAND_SYNTAX_ERROR;
- if (xscale_get_arch_pointers(target, &armv4_5, &xscale) != ERROR_OK)
- {
- return ERROR_OK;
- }
+ retval = xscale_verify_pointer(CMD_CTX, xscale);
+ if (retval != ERROR_OK)
+ return retval;
- if (xscale->trace.image)
- {
+ if (xscale->trace.image) {
image_close(xscale->trace.image);
free(xscale->trace.image);
- command_print(cmd_ctx, "previously loaded image found and closed");
+ command_print(CMD_CTX, "previously loaded image found and closed");
}
- xscale->trace.image = malloc(sizeof(image_t));
+ xscale->trace.image = malloc(sizeof(struct image));
xscale->trace.image->base_address_set = 0;
xscale->trace.image->start_address_set = 0;
/* a base address isn't always necessary, default to 0x0 (i.e. don't relocate) */
- if (argc >= 2)
- {
+ if (CMD_ARGC >= 2) {
xscale->trace.image->base_address_set = 1;
- xscale->trace.image->base_address = strtoul(args[1], NULL, 0);
- }
- else
- {
+ COMMAND_PARSE_NUMBER(llong, CMD_ARGV[1], xscale->trace.image->base_address);
+ } else
xscale->trace.image->base_address_set = 0;
- }
- if (image_open(xscale->trace.image, args[0], (argc >= 3) ? args[2] : NULL) != ERROR_OK)
- {
+ if (image_open(xscale->trace.image, CMD_ARGV[0],
+ (CMD_ARGC >= 3) ? CMD_ARGV[2] : NULL) != ERROR_OK) {
free(xscale->trace.image);
xscale->trace.image = NULL;
return ERROR_OK;
return ERROR_OK;
}
-int xscale_handle_dump_trace_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+COMMAND_HANDLER(xscale_handle_dump_trace_command)
{
- target_t *target = get_current_target(cmd_ctx);
- armv4_5_common_t *armv4_5;
- xscale_common_t *xscale;
- xscale_trace_data_t *trace_data;
- fileio_t file;
+ struct target *target = get_current_target(CMD_CTX);
+ struct xscale_common *xscale = target_to_xscale(target);
+ struct xscale_trace_data *trace_data;
+ struct fileio file;
+ int retval;
- if (xscale_get_arch_pointers(target, &armv4_5, &xscale) != ERROR_OK)
- {
- return ERROR_OK;
- }
+ retval = xscale_verify_pointer(CMD_CTX, xscale);
+ if (retval != ERROR_OK)
+ return retval;
- if (target->state != TARGET_HALTED)
- {
- command_print(cmd_ctx, "target must be stopped for \"%s\" command", cmd);
+ if (target->state != TARGET_HALTED) {
+ command_print(CMD_CTX, "target must be stopped for \"%s\" command", CMD_NAME);
return ERROR_OK;
}
- if (argc < 1)
- {
- command_print(cmd_ctx, "usage: xscale dump_trace <file>");
- return ERROR_OK;
- }
+ if (CMD_ARGC < 1)
+ return ERROR_COMMAND_SYNTAX_ERROR;
trace_data = xscale->trace.data;
- if (!trace_data)
- {
- command_print(cmd_ctx, "no trace data collected");
+ if (!trace_data) {
+ command_print(CMD_CTX, "no trace data collected");
return ERROR_OK;
}
- if (fileio_open(&file, args[0], FILEIO_WRITE, FILEIO_BINARY) != ERROR_OK)
- {
+ if (fileio_open(&file, CMD_ARGV[0], FILEIO_WRITE, FILEIO_BINARY) != ERROR_OK)
return ERROR_OK;
- }
- while (trace_data)
- {
+ while (trace_data) {
int i;
fileio_write_u32(&file, trace_data->chkpt0);
fileio_write_u32(&file, trace_data->depth);
for (i = 0; i < trace_data->depth; i++)
- fileio_write_u32(&file, trace_data->entries[i].data | ((trace_data->entries[i].type & 0xffff) << 16));
+ fileio_write_u32(&file, trace_data->entries[i].data |
+ ((trace_data->entries[i].type & 0xffff) << 16));
trace_data = trace_data->next;
}
return ERROR_OK;
}
-int xscale_handle_analyze_trace_buffer_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+COMMAND_HANDLER(xscale_handle_analyze_trace_buffer_command)
{
- target_t *target = get_current_target(cmd_ctx);
- armv4_5_common_t *armv4_5;
- xscale_common_t *xscale;
+ struct target *target = get_current_target(CMD_CTX);
+ struct xscale_common *xscale = target_to_xscale(target);
+ int retval;
- if (xscale_get_arch_pointers(target, &armv4_5, &xscale) != ERROR_OK)
- {
- return ERROR_OK;
- }
+ retval = xscale_verify_pointer(CMD_CTX, xscale);
+ if (retval != ERROR_OK)
+ return retval;
- xscale_analyze_trace(target, cmd_ctx);
+ xscale_analyze_trace(target, CMD_CTX);
return ERROR_OK;
}
-int xscale_handle_cp15(command_context_t *cmd_ctx, char *cmd, char **args, int argc)
+COMMAND_HANDLER(xscale_handle_cp15)
{
- target_t *target = get_current_target(cmd_ctx);
- armv4_5_common_t *armv4_5;
- xscale_common_t *xscale;
+ struct target *target = get_current_target(CMD_CTX);
+ struct xscale_common *xscale = target_to_xscale(target);
+ int retval;
- if (xscale_get_arch_pointers(target, &armv4_5, &xscale) != ERROR_OK)
- {
- return ERROR_OK;
- }
+ retval = xscale_verify_pointer(CMD_CTX, xscale);
+ if (retval != ERROR_OK)
+ return retval;
- if (target->state != TARGET_HALTED)
- {
- command_print(cmd_ctx, "target must be stopped for \"%s\" command", cmd);
+ if (target->state != TARGET_HALTED) {
+ command_print(CMD_CTX, "target must be stopped for \"%s\" command", CMD_NAME);
return ERROR_OK;
}
- u32 reg_no = 0;
- reg_t *reg = NULL;
- if(argc > 0)
- {
- reg_no = strtoul(args[0], NULL, 0);
+ uint32_t reg_no = 0;
+ struct reg *reg = NULL;
+ if (CMD_ARGC > 0) {
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], reg_no);
/*translate from xscale cp15 register no to openocd register*/
- switch(reg_no)
- {
- case 0:
- reg_no = XSCALE_MAINID;
- break;
- case 1:
- reg_no = XSCALE_CTRL;
- break;
- case 2:
- reg_no = XSCALE_TTB;
- break;
- case 3:
- reg_no = XSCALE_DAC;
- break;
- case 5:
- reg_no = XSCALE_FSR;
- break;
- case 6:
- reg_no = XSCALE_FAR;
- break;
- case 13:
- reg_no = XSCALE_PID;
- break;
- case 15:
- reg_no = XSCALE_CPACCESS;
- break;
- default:
- command_print(cmd_ctx, "invalid register number");
- return ERROR_INVALID_ARGUMENTS;
+ switch (reg_no) {
+ case 0:
+ reg_no = XSCALE_MAINID;
+ break;
+ case 1:
+ reg_no = XSCALE_CTRL;
+ break;
+ case 2:
+ reg_no = XSCALE_TTB;
+ break;
+ case 3:
+ reg_no = XSCALE_DAC;
+ break;
+ case 5:
+ reg_no = XSCALE_FSR;
+ break;
+ case 6:
+ reg_no = XSCALE_FAR;
+ break;
+ case 13:
+ reg_no = XSCALE_PID;
+ break;
+ case 15:
+ reg_no = XSCALE_CPACCESS;
+ break;
+ default:
+ command_print(CMD_CTX, "invalid register number");
+ return ERROR_COMMAND_SYNTAX_ERROR;
}
reg = &xscale->reg_cache->reg_list[reg_no];
}
- if(argc == 1)
- {
- u32 value;
+ if (CMD_ARGC == 1) {
+ uint32_t value;
/* read cp15 control register */
xscale_get_reg(reg);
value = buf_get_u32(reg->value, 0, 32);
- command_print(cmd_ctx, "%s (/%i): 0x%x", reg->name, reg->size, value);
- }
- else if(argc == 2)
- {
-
- u32 value = strtoul(args[1], NULL, 0);
+ command_print(CMD_CTX, "%s (/%i): 0x%" PRIx32 "", reg->name, (int)(reg->size),
+ value);
+ } else if (CMD_ARGC == 2) {
+ uint32_t value;
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], value);
/* send CP write request (command 0x41) */
xscale_send_u32(target, 0x41);
/* execute cpwait to ensure outstanding operations complete */
xscale_send_u32(target, 0x53);
- }
- else
- {
- command_print(cmd_ctx, "usage: cp15 [register]<, [value]>");
- }
+ } else
+ return ERROR_COMMAND_SYNTAX_ERROR;
return ERROR_OK;
}
-int xscale_register_commands(struct command_context_s *cmd_ctx)
-{
- command_t *xscale_cmd;
+static const struct command_registration xscale_exec_command_handlers[] = {
+ {
+ .name = "cache_info",
+ .handler = xscale_handle_cache_info_command,
+ .mode = COMMAND_EXEC,
+ .help = "display information about CPU caches",
+ },
+ {
+ .name = "mmu",
+ .handler = xscale_handle_mmu_command,
+ .mode = COMMAND_EXEC,
+ .help = "enable or disable the MMU",
+ .usage = "['enable'|'disable']",
+ },
+ {
+ .name = "icache",
+ .handler = xscale_handle_idcache_command,
+ .mode = COMMAND_EXEC,
+ .help = "display ICache state, optionally enabling or "
+ "disabling it",
+ .usage = "['enable'|'disable']",
+ },
+ {
+ .name = "dcache",
+ .handler = xscale_handle_idcache_command,
+ .mode = COMMAND_EXEC,
+ .help = "display DCache state, optionally enabling or "
+ "disabling it",
+ .usage = "['enable'|'disable']",
+ },
+ {
+ .name = "vector_catch",
+ .handler = xscale_handle_vector_catch_command,
+ .mode = COMMAND_EXEC,
+ .help = "set or display mask of vectors "
+ "that should trigger debug entry",
+ .usage = "['all'|'none'|'fiq'|'irq'|'dabt'|'pabt'|'swi'|'undef'|'reset']",
+ },
+ {
+ .name = "vector_table",
+ .handler = xscale_handle_vector_table_command,
+ .mode = COMMAND_EXEC,
+ .help = "set vector table entry in mini-ICache, "
+ "or display current tables",
+ .usage = "[('high'|'low') index code]",
+ },
+ {
+ .name = "trace_buffer",
+ .handler = xscale_handle_trace_buffer_command,
+ .mode = COMMAND_EXEC,
+ .help = "display trace buffer status, enable or disable "
+ "tracing, and optionally reconfigure trace mode",
+ .usage = "['enable'|'disable' ['fill' [number]|'wrap']]",
+ },
+ {
+ .name = "dump_trace",
+ .handler = xscale_handle_dump_trace_command,
+ .mode = COMMAND_EXEC,
+ .help = "dump content of trace buffer to file",
+ .usage = "filename",
+ },
+ {
+ .name = "analyze_trace",
+ .handler = xscale_handle_analyze_trace_buffer_command,
+ .mode = COMMAND_EXEC,
+ .help = "analyze content of trace buffer",
+ .usage = "",
+ },
+ {
+ .name = "trace_image",
+ .handler = xscale_handle_trace_image_command,
+ .mode = COMMAND_EXEC,
+ .help = "load image from file to address (default 0)",
+ .usage = "filename [offset [filetype]]",
+ },
+ {
+ .name = "cp15",
+ .handler = xscale_handle_cp15,
+ .mode = COMMAND_EXEC,
+ .help = "Read or write coprocessor 15 register.",
+ .usage = "register [value]",
+ },
+ COMMAND_REGISTRATION_DONE
+};
+static const struct command_registration xscale_any_command_handlers[] = {
+ {
+ .name = "debug_handler",
+ .handler = xscale_handle_debug_handler_command,
+ .mode = COMMAND_ANY,
+ .help = "Change address used for debug handler.",
+ .usage = "<target> <address>",
+ },
+ {
+ .name = "cache_clean_address",
+ .handler = xscale_handle_cache_clean_address_command,
+ .mode = COMMAND_ANY,
+ .help = "Change address used for cleaning data cache.",
+ .usage = "address",
+ },
+ {
+ .chain = xscale_exec_command_handlers,
+ },
+ COMMAND_REGISTRATION_DONE
+};
+static const struct command_registration xscale_command_handlers[] = {
+ {
+ .chain = arm_command_handlers,
+ },
+ {
+ .name = "xscale",
+ .mode = COMMAND_ANY,
+ .help = "xscale command group",
+ .usage = "",
+ .chain = xscale_any_command_handlers,
+ },
+ COMMAND_REGISTRATION_DONE
+};
+
+struct target_type xscale_target = {
+ .name = "xscale",
+
+ .poll = xscale_poll,
+ .arch_state = xscale_arch_state,
- xscale_cmd = register_command(cmd_ctx, NULL, "xscale", NULL, COMMAND_ANY, "xscale specific commands");
+ .halt = xscale_halt,
+ .resume = xscale_resume,
+ .step = xscale_step,
- register_command(cmd_ctx, xscale_cmd, "debug_handler", xscale_handle_debug_handler_command, COMMAND_ANY, "'xscale debug_handler <target#> <address>' command takes two required operands");
- register_command(cmd_ctx, xscale_cmd, "cache_clean_address", xscale_handle_cache_clean_address_command, COMMAND_ANY, NULL);
+ .assert_reset = xscale_assert_reset,
+ .deassert_reset = xscale_deassert_reset,
- register_command(cmd_ctx, xscale_cmd, "cache_info", xscale_handle_cache_info_command, COMMAND_EXEC, NULL);
- register_command(cmd_ctx, xscale_cmd, "mmu", xscale_handle_mmu_command, COMMAND_EXEC, "['enable'|'disable'] the MMU");
- register_command(cmd_ctx, xscale_cmd, "icache", xscale_handle_idcache_command, COMMAND_EXEC, "['enable'|'disable'] the ICache");
- register_command(cmd_ctx, xscale_cmd, "dcache", xscale_handle_idcache_command, COMMAND_EXEC, "['enable'|'disable'] the DCache");
+ /* REVISIT on some cores, allow exporting iwmmxt registers ... */
+ .get_gdb_reg_list = arm_get_gdb_reg_list,
- register_command(cmd_ctx, xscale_cmd, "vector_catch", xscale_handle_idcache_command, COMMAND_EXEC, "<mask> of vectors that should be catched");
+ .read_memory = xscale_read_memory,
+ .read_phys_memory = xscale_read_phys_memory,
+ .write_memory = xscale_write_memory,
+ .write_phys_memory = xscale_write_phys_memory,
- register_command(cmd_ctx, xscale_cmd, "trace_buffer", xscale_handle_trace_buffer_command, COMMAND_EXEC, "<enable|disable> ['fill' [n]|'wrap']");
+ .checksum_memory = arm_checksum_memory,
+ .blank_check_memory = arm_blank_check_memory,
- register_command(cmd_ctx, xscale_cmd, "dump_trace", xscale_handle_dump_trace_command, COMMAND_EXEC, "dump content of trace buffer to <file>");
- register_command(cmd_ctx, xscale_cmd, "analyze_trace", xscale_handle_analyze_trace_buffer_command, COMMAND_EXEC, "analyze content of trace buffer");
- register_command(cmd_ctx, xscale_cmd, "trace_image", xscale_handle_trace_image_command,
- COMMAND_EXEC, "load image from <file> [base address]");
+ .run_algorithm = armv4_5_run_algorithm,
- register_command(cmd_ctx, xscale_cmd, "cp15", xscale_handle_cp15, COMMAND_EXEC, "access coproc 15 <register> [value]");
+ .add_breakpoint = xscale_add_breakpoint,
+ .remove_breakpoint = xscale_remove_breakpoint,
+ .add_watchpoint = xscale_add_watchpoint,
+ .remove_watchpoint = xscale_remove_watchpoint,
- armv4_5_register_commands(cmd_ctx);
+ .commands = xscale_command_handlers,
+ .target_create = xscale_target_create,
+ .init_target = xscale_init_target,
- return ERROR_OK;
-}
+ .virt2phys = xscale_virt2phys,
+ .mmu = xscale_mmu
+};