#include <helper/time_support.h>
#include "register.h"
#include "image.h"
+#include "arm_opcodes.h"
+#include "armv4_5.h"
/*
return ERROR_OK;
}
-static int xscale_jtag_set_instr(struct jtag_tap *tap, uint32_t new_instr)
+static int xscale_jtag_set_instr(struct jtag_tap *tap, uint32_t new_instr, tap_state_t end_state)
{
if (tap == NULL)
return ERROR_FAIL;
uint8_t scratch[4];
memset(&field, 0, sizeof field);
- field.tap = tap;
field.num_bits = tap->ir_length;
field.out_value = scratch;
- buf_set_u32(field.out_value, 0, field.num_bits, new_instr);
+ buf_set_u32(scratch, 0, field.num_bits, new_instr);
- jtag_add_ir_scan(1, &field, jtag_get_end_state());
+ jtag_add_ir_scan(tap, &field, end_state);
}
return ERROR_OK;
uint8_t field2_check_value = 0x0;
uint8_t field2_check_mask = 0x1;
- jtag_set_end_state(TAP_DRPAUSE);
xscale_jtag_set_instr(target->tap,
- XSCALE_SELDCSR << xscale->xscale_variant);
+ XSCALE_SELDCSR << xscale->xscale_variant,
+ TAP_DRPAUSE);
buf_set_u32(&field0, 1, 1, xscale->hold_rst);
buf_set_u32(&field0, 2, 1, xscale->external_debug_break);
memset(&fields, 0, sizeof fields);
- fields[0].tap = target->tap;
fields[0].num_bits = 3;
fields[0].out_value = &field0;
uint8_t tmp;
fields[0].in_value = &tmp;
- fields[1].tap = target->tap;
fields[1].num_bits = 32;
fields[1].in_value = xscale->reg_cache->reg_list[XSCALE_DCSR].value;
- fields[2].tap = target->tap;
fields[2].num_bits = 1;
fields[2].out_value = &field2;
uint8_t tmp2;
fields[2].in_value = &tmp2;
- jtag_add_dr_scan(3, fields, jtag_get_end_state());
+ jtag_add_dr_scan(target->tap, 3, fields, TAP_DRPAUSE);
jtag_check_value_mask(fields + 0, &field0_check_value, &field0_check_mask);
jtag_check_value_mask(fields + 2, &field2_check_value, &field2_check_mask);
fields[1].out_value = xscale->reg_cache->reg_list[XSCALE_DCSR].value;
fields[1].in_value = NULL;
- jtag_set_end_state(TAP_IDLE);
-
- jtag_add_dr_scan(3, fields, jtag_get_end_state());
+ jtag_add_dr_scan(target->tap, 3, fields, TAP_DRPAUSE);
/* DANGER!!! this must be here. It will make sure that the arguments
* to jtag_set_check_value() does not go out of scope! */
memset(&fields, 0, sizeof fields);
- fields[0].tap = target->tap;
fields[0].num_bits = 3;
fields[0].check_value = &field0_check_value;
fields[0].check_mask = &field0_check_mask;
- fields[1].tap = target->tap;
fields[1].num_bits = 32;
- fields[2].tap = target->tap;
fields[2].num_bits = 1;
fields[2].check_value = &field2_check_value;
fields[2].check_mask = &field2_check_mask;
- jtag_set_end_state(TAP_IDLE);
xscale_jtag_set_instr(target->tap,
- XSCALE_DBGTX << xscale->xscale_variant);
- jtag_add_runtest(1, jtag_get_end_state()); /* ensures that we're in the TAP_IDLE state as the above could be a no-op */
+ XSCALE_DBGTX << xscale->xscale_variant,
+ TAP_IDLE);
+ jtag_add_runtest(1, TAP_IDLE); /* ensures that we're in the TAP_IDLE state as the above could be a no-op */
/* repeat until all words have been collected */
int attempts = 0;
fields[1].in_value = (uint8_t *)(field1 + i);
- jtag_add_dr_scan_check(3, fields, jtag_set_end_state(TAP_IDLE));
+ jtag_add_dr_scan_check(target->tap, 3, fields, TAP_IDLE);
jtag_add_callback(xscale_getbuf, (jtag_callback_data_t)(field1 + i));
uint8_t field2_check_value = 0x0;
uint8_t field2_check_mask = 0x1;
- jtag_set_end_state(TAP_IDLE);
-
xscale_jtag_set_instr(target->tap,
- XSCALE_DBGTX << xscale->xscale_variant);
+ XSCALE_DBGTX << xscale->xscale_variant,
+ TAP_IDLE);
path[0] = TAP_DRSELECT;
path[1] = TAP_DRCAPTURE;
memset(&fields, 0, sizeof fields);
- fields[0].tap = target->tap;
fields[0].num_bits = 3;
fields[0].in_value = &field0_in;
- fields[1].tap = target->tap;
fields[1].num_bits = 32;
fields[1].in_value = xscale->reg_cache->reg_list[XSCALE_TX].value;
- fields[2].tap = target->tap;
fields[2].num_bits = 1;
uint8_t tmp;
fields[2].in_value = &tmp;
jtag_add_pathmove(ARRAY_SIZE(noconsume_path), noconsume_path);
}
- jtag_add_dr_scan(3, fields, jtag_set_end_state(TAP_IDLE));
+ jtag_add_dr_scan(target->tap, 3, fields, TAP_IDLE);
jtag_check_value_mask(fields + 0, &field0_check_value, &field0_check_mask);
jtag_check_value_mask(fields + 2, &field2_check_value, &field2_check_mask);
uint8_t field2_check_value = 0x0;
uint8_t field2_check_mask = 0x1;
- jtag_set_end_state(TAP_IDLE);
-
xscale_jtag_set_instr(target->tap,
- XSCALE_DBGRX << xscale->xscale_variant);
+ XSCALE_DBGRX << xscale->xscale_variant,
+ TAP_IDLE);
memset(&fields, 0, sizeof fields);
- fields[0].tap = target->tap;
fields[0].num_bits = 3;
fields[0].out_value = &field0_out;
fields[0].in_value = &field0_in;
- fields[1].tap = target->tap;
fields[1].num_bits = 32;
fields[1].out_value = xscale->reg_cache->reg_list[XSCALE_RX].value;
- fields[2].tap = target->tap;
fields[2].num_bits = 1;
fields[2].out_value = &field2;
uint8_t tmp;
LOG_DEBUG("polling RX");
for (;;)
{
- jtag_add_dr_scan(3, fields, jtag_set_end_state(TAP_IDLE));
+ jtag_add_dr_scan(target->tap, 3, fields, TAP_IDLE);
jtag_check_value_mask(fields + 0, &field0_check_value, &field0_check_mask);
jtag_check_value_mask(fields + 2, &field2_check_value, &field2_check_mask);
/* set rx_valid */
field2 = 0x1;
- jtag_add_dr_scan(3, fields, jtag_set_end_state(TAP_IDLE));
+ jtag_add_dr_scan(target->tap, 3, fields, TAP_IDLE);
if ((retval = jtag_execute_queue()) != ERROR_OK)
{
int retval;
int done_count = 0;
- jtag_set_end_state(TAP_IDLE);
-
xscale_jtag_set_instr(target->tap,
- XSCALE_DBGRX << xscale->xscale_variant);
+ XSCALE_DBGRX << xscale->xscale_variant,
+ TAP_IDLE);
bits[0]=3;
t[0]=0;
3,
bits,
t,
- jtag_set_end_state(TAP_IDLE));
+ TAP_IDLE);
buffer += size;
}
if (ext_dbg_brk != -1)
xscale->external_debug_break = ext_dbg_brk;
- jtag_set_end_state(TAP_IDLE);
xscale_jtag_set_instr(target->tap,
- XSCALE_SELDCSR << xscale->xscale_variant);
+ XSCALE_SELDCSR << xscale->xscale_variant,
+ TAP_IDLE);
buf_set_u32(&field0, 1, 1, xscale->hold_rst);
buf_set_u32(&field0, 2, 1, xscale->external_debug_break);
memset(&fields, 0, sizeof fields);
- fields[0].tap = target->tap;
fields[0].num_bits = 3;
fields[0].out_value = &field0;
uint8_t tmp;
fields[0].in_value = &tmp;
- fields[1].tap = target->tap;
fields[1].num_bits = 32;
fields[1].out_value = xscale->reg_cache->reg_list[XSCALE_DCSR].value;
- fields[2].tap = target->tap;
fields[2].num_bits = 1;
fields[2].out_value = &field2;
uint8_t tmp2;
fields[2].in_value = &tmp2;
- jtag_add_dr_scan(3, fields, jtag_get_end_state());
+ jtag_add_dr_scan(target->tap, 3, fields, TAP_IDLE);
jtag_check_value_mask(fields + 0, &field0_check_value, &field0_check_mask);
jtag_check_value_mask(fields + 2, &field2_check_value, &field2_check_mask);
LOG_DEBUG("loading miniIC at 0x%8.8" PRIx32 "", va);
/* LDIC into IR */
- jtag_set_end_state(TAP_IDLE);
xscale_jtag_set_instr(target->tap,
- XSCALE_LDIC << xscale->xscale_variant);
+ XSCALE_LDIC << xscale->xscale_variant,
+ TAP_IDLE);
/* CMD is b011 to load a cacheline into the Mini ICache.
* Loading into the main ICache is deprecated, and unused.
memset(&fields, 0, sizeof fields);
- fields[0].tap = target->tap;
fields[0].num_bits = 6;
fields[0].out_value = &cmd;
- fields[1].tap = target->tap;
fields[1].num_bits = 27;
fields[1].out_value = packet;
- jtag_add_dr_scan(2, fields, jtag_get_end_state());
+ jtag_add_dr_scan(target->tap, 2, fields, TAP_IDLE);
/* rest of packet is a cacheline: 8 instructions, with parity */
fields[0].num_bits = 32;
memcpy(&value, packet, sizeof(uint32_t));
cmd = parity(value);
- jtag_add_dr_scan(2, fields, jtag_get_end_state());
+ jtag_add_dr_scan(target->tap, 2, fields, TAP_IDLE);
}
return jtag_execute_queue();
uint8_t cmd;
struct scan_field fields[2];
- jtag_set_end_state(TAP_IDLE);
xscale_jtag_set_instr(target->tap,
- XSCALE_LDIC << xscale->xscale_variant);
+ XSCALE_LDIC << xscale->xscale_variant,
+ TAP_IDLE);
/* CMD for invalidate IC line b000, bits [6:4] b000 */
buf_set_u32(&cmd, 0, 6, 0x0);
memset(&fields, 0, sizeof fields);
- fields[0].tap = target->tap;
fields[0].num_bits = 6;
fields[0].out_value = &cmd;
- fields[1].tap = target->tap;
fields[1].num_bits = 27;
fields[1].out_value = packet;
- jtag_add_dr_scan(2, fields, jtag_get_end_state());
+ jtag_add_dr_scan(target->tap, 2, fields, TAP_IDLE);
return ERROR_OK;
}
"", "\n(processor reset)", "\n(trace buffer full)"
};
- if (armv4_5->common_magic != ARMV4_5_COMMON_MAGIC)
+ if (armv4_5->common_magic != ARM_COMMON_MAGIC)
{
LOG_ERROR("BUG: called for a non-ARMv4/5 target");
return ERROR_INVALID_ARGUMENTS;
}
- LOG_USER("target halted in %s state due to %s, current mode: %s\n"
- "cpsr: 0x%8.8" PRIx32 " pc: 0x%8.8" PRIx32 "\n"
- "MMU: %s, D-Cache: %s, I-Cache: %s"
- "%s",
- arm_state_strings[armv4_5->core_state],
- Jim_Nvp_value2name_simple(nvp_target_debug_reason, target->debug_reason)->name ,
- arm_mode_name(armv4_5->core_mode),
- buf_get_u32(armv4_5->cpsr->value, 0, 32),
- buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32),
+ arm_arch_state(target);
+ LOG_USER("MMU: %s, D-Cache: %s, I-Cache: %s%s",
state[xscale->armv4_5_mmu.mmu_enabled],
state[xscale->armv4_5_mmu.armv4_5_cache.d_u_cache_enabled],
state[xscale->armv4_5_mmu.armv4_5_cache.i_cache_enabled],
LOG_DEBUG("r0: 0x%8.8" PRIx32 "", buffer[0]);
/* move pc from buffer to register cache */
- buf_set_u32(armv4_5->core_cache->reg_list[15].value, 0, 32, buffer[1]);
- armv4_5->core_cache->reg_list[15].dirty = 1;
- armv4_5->core_cache->reg_list[15].valid = 1;
+ buf_set_u32(armv4_5->pc->value, 0, 32, buffer[1]);
+ armv4_5->pc->dirty = 1;
+ armv4_5->pc->valid = 1;
LOG_DEBUG("pc: 0x%8.8" PRIx32 "", buffer[1]);
/* move data from buffer to register cache */
moe = buf_get_u32(xscale->reg_cache->reg_list[XSCALE_DCSR].value, 2, 3);
/* stored PC (for calculating fixup) */
- pc = buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32);
+ pc = buf_get_u32(armv4_5->pc->value, 0, 32);
switch (moe)
{
}
/* apply PC fixup */
- buf_set_u32(armv4_5->core_cache->reg_list[15].value, 0, 32, pc);
+ buf_set_u32(armv4_5->pc->value, 0, 32, pc);
/* on the first debug entry, identify cache type */
if (xscale->armv4_5_mmu.armv4_5_cache.ctype == -1)
/* current = 1: continue on current pc, otherwise continue at <address> */
if (!current)
- buf_set_u32(armv4_5->core_cache->reg_list[15].value, 0, 32, address);
+ buf_set_u32(armv4_5->pc->value, 0, 32, address);
- current_pc = buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32);
+ current_pc = buf_get_u32(armv4_5->pc->value, 0, 32);
/* if we're at the reset vector, we have to simulate the branch */
if (current_pc == 0x0)
{
arm_simulate_step(target, NULL);
- current_pc = buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32);
+ current_pc = buf_get_u32(armv4_5->pc->value, 0, 32);
}
/* the front-end may request us not to handle breakpoints */
if (handle_breakpoints)
{
- if ((breakpoint = breakpoint_find(target, buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32))))
+ breakpoint = breakpoint_find(target,
+ buf_get_u32(armv4_5->pc->value, 0, 32));
+ if (breakpoint != NULL)
{
uint32_t next_pc;
+ int saved_trace_buffer_enabled;
/* there's a breakpoint at the current PC, we have to step over it */
LOG_DEBUG("unset breakpoint at 0x%8.8" PRIx32 "", breakpoint->address);
/* restore banked registers */
retval = xscale_restore_banked(target);
- /* send resume request (command 0x30 or 0x31)
- * clean the trace buffer if it is to be enabled (0x62) */
- if (xscale->trace.buffer_enabled)
- {
- xscale_send_u32(target, 0x62);
- xscale_send_u32(target, 0x31);
- }
- else
- xscale_send_u32(target, 0x30);
+ /* send resume request */
+ xscale_send_u32(target, 0x30);
/* send CPSR */
xscale_send_u32(target,
}
/* send PC */
- xscale_send_u32(target, buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32));
- LOG_DEBUG("writing PC with value 0x%8.8" PRIx32 "", buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32));
+ xscale_send_u32(target,
+ buf_get_u32(armv4_5->pc->value, 0, 32));
+ LOG_DEBUG("writing PC with value 0x%8.8" PRIx32,
+ buf_get_u32(armv4_5->pc->value, 0, 32));
+
+ /* disable trace data collection in xscale_debug_entry() */
+ saved_trace_buffer_enabled = xscale->trace.buffer_enabled;
+ xscale->trace.buffer_enabled = 0;
/* wait for and process debug entry */
xscale_debug_entry(target);
+ /* re-enable trace buffer, if enabled previously */
+ xscale->trace.buffer_enabled = saved_trace_buffer_enabled;
+
LOG_DEBUG("disable single-step");
xscale_disable_single_step(target);
* clean the trace buffer if it is to be enabled (0x62) */
if (xscale->trace.buffer_enabled)
{
+ /* if trace buffer is set to 'fill' mode, save starting pc */
+ if (xscale->trace.buffer_fill > 0)
+ {
+ xscale->trace.pc_ok = 1;
+ xscale->trace.current_pc = buf_get_u32(armv4_5->pc->value, 0, 32);
+ }
xscale_send_u32(target, 0x62);
xscale_send_u32(target, 0x31);
}
}
/* send PC */
- xscale_send_u32(target, buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32));
- LOG_DEBUG("writing PC with value 0x%8.8" PRIx32 "", buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32));
+ xscale_send_u32(target, buf_get_u32(armv4_5->pc->value, 0, 32));
+ LOG_DEBUG("wrote PC with value 0x%8.8" PRIx32,
+ buf_get_u32(armv4_5->pc->value, 0, 32));
target->debug_reason = DBG_REASON_NOTHALTED;
if ((retval = arm_simulate_step(target, &next_pc)) != ERROR_OK)
{
uint32_t current_opcode, current_pc;
- current_pc = buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32);
+ current_pc = buf_get_u32(armv4_5->pc->value, 0, 32);
target_read_u32(target, current_pc, ¤t_opcode);
LOG_ERROR("BUG: couldn't calculate PC of next instruction, current opcode was 0x%8.8" PRIx32 "", current_opcode);
}
/* send PC */
- if ((retval = xscale_send_u32(target, buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32))) != ERROR_OK)
+ retval = xscale_send_u32(target,
+ buf_get_u32(armv4_5->pc->value, 0, 32));
+ if (retval != ERROR_OK)
return retval;
- LOG_DEBUG("writing PC with value 0x%8.8" PRIx32, buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32));
+ LOG_DEBUG("wrote PC with value 0x%8.8" PRIx32,
+ buf_get_u32(armv4_5->pc->value, 0, 32));
target_call_event_callbacks(target, TARGET_EVENT_RESUMED);
uint32_t address, int handle_breakpoints)
{
struct arm *armv4_5 = target_to_arm(target);
- struct breakpoint *breakpoint = target->breakpoints;
+ struct breakpoint *breakpoint = NULL;
uint32_t current_pc;
int retval;
/* current = 1: continue on current pc, otherwise continue at <address> */
if (!current)
- buf_set_u32(armv4_5->core_cache->reg_list[15].value, 0, 32, address);
+ buf_set_u32(armv4_5->pc->value, 0, 32, address);
- current_pc = buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32);
+ current_pc = buf_get_u32(armv4_5->pc->value, 0, 32);
/* if we're at the reset vector, we have to simulate the step */
if (current_pc == 0x0)
{
if ((retval = arm_simulate_step(target, NULL)) != ERROR_OK)
return retval;
- current_pc = buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32);
+ current_pc = buf_get_u32(armv4_5->pc->value, 0, 32);
target->debug_reason = DBG_REASON_SINGLESTEP;
target_call_event_callbacks(target, TARGET_EVENT_HALTED);
/* the front-end may request us not to handle breakpoints */
if (handle_breakpoints)
- if ((breakpoint = breakpoint_find(target, buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32))))
- {
- if ((retval = xscale_unset_breakpoint(target, breakpoint)) != ERROR_OK)
- return retval;
- }
+ breakpoint = breakpoint_find(target,
+ buf_get_u32(armv4_5->pc->value, 0, 32));
+ if (breakpoint != NULL) {
+ retval = xscale_unset_breakpoint(target, breakpoint);
+ if (retval != ERROR_OK)
+ return retval;
+ }
retval = xscale_step_inner(target, current, address, handle_breakpoints);
/* select DCSR instruction (set endstate to R-T-I to ensure we don't
* end up in T-L-R, which would reset JTAG
*/
- jtag_set_end_state(TAP_IDLE);
xscale_jtag_set_instr(target->tap,
- XSCALE_SELDCSR << xscale->xscale_variant);
+ XSCALE_SELDCSR << xscale->xscale_variant,
+ TAP_IDLE);
/* set Hold reset, Halt mode and Trap Reset */
buf_set_u32(xscale->reg_cache->reg_list[XSCALE_DCSR].value, 30, 1, 0x1);
xscale_write_dcsr(target, 1, 0);
/* select BYPASS, because having DCSR selected caused problems on the PXA27x */
- xscale_jtag_set_instr(target->tap, 0x7f);
+ xscale_jtag_set_instr(target->tap, ~0, TAP_IDLE);
jtag_execute_queue();
/* assert reset */
/* wait 300ms; 150 and 100ms were not enough */
jtag_add_sleep(300*1000);
- jtag_add_runtest(2030, jtag_set_end_state(TAP_IDLE));
+ jtag_add_runtest(2030, TAP_IDLE);
jtag_execute_queue();
/* set Hold reset, Halt mode and Trap Reset */
if (retval != ERROR_OK)
return retval;
- jtag_add_runtest(30, jtag_set_end_state(TAP_IDLE));
+ jtag_add_runtest(30, TAP_IDLE);
jtag_add_sleep(100000);
static int xscale_read_phys_memory(struct target *target, uint32_t address,
uint32_t size, uint32_t count, uint8_t *buffer)
{
- /** \todo: provide a non-stub implementtion of this routine. */
+ struct xscale_common *xscale = target_to_xscale(target);
+
+ /* with MMU inactive, there are only physical addresses */
+ if (!xscale->armv4_5_mmu.mmu_enabled)
+ return xscale_read_memory(target, address, size, count, buffer);
+
+ /** \todo: provide a non-stub implementation of this routine. */
LOG_ERROR("%s: %s is not implemented. Disable MMU?",
target_name(target), __func__);
return ERROR_FAIL;
static int xscale_write_phys_memory(struct target *target, uint32_t address,
uint32_t size, uint32_t count, uint8_t *buffer)
{
- /** \todo: provide a non-stub implementtion of this routine. */
+ struct xscale_common *xscale = target_to_xscale(target);
+
+ /* with MMU inactive, there are only physical addresses */
+ if (!xscale->armv4_5_mmu.mmu_enabled)
+ return xscale_read_memory(target, address, size, count, buffer);
+
+ /** \todo: provide a non-stub implementation of this routine. */
LOG_ERROR("%s: %s is not implemented. Disable MMU?",
target_name(target), __func__);
return ERROR_FAIL;
{
return retval;
}
- /* write the original instruction in target endianness (arm7_9->arm_bkpt is host endian) */
+ /* write the bkpt instruction in target endianness (arm7_9->arm_bkpt is host endian) */
if ((retval = target_write_u32(target, breakpoint->address, xscale->arm_bkpt)) != ERROR_OK)
{
return retval;
{
return retval;
}
- /* write the original instruction in target endianness (arm7_9->arm_bkpt is host endian) */
+ /* write the bkpt instruction in target endianness (arm7_9->arm_bkpt is host endian) */
if ((retval = target_write_u32(target, breakpoint->address, xscale->thumb_bkpt)) != ERROR_OK)
{
return retval;
}
}
breakpoint->set = 1;
+
+ xscale_send_u32(target, 0x50); /* clean dcache */
+ xscale_send_u32(target, xscale->cache_clean_address);
+ xscale_send_u32(target, 0x51); /* invalidate dcache */
+ xscale_send_u32(target, 0x52); /* invalidate icache and flush fetch buffers */
}
return ERROR_OK;
}
}
breakpoint->set = 0;
+
+ xscale_send_u32(target, 0x50); /* clean dcache */
+ xscale_send_u32(target, xscale->cache_clean_address);
+ xscale_send_u32(target, 0x51); /* invalidate dcache */
+ xscale_send_u32(target, 0x52); /* invalidate icache and flush fetch buffers */
}
return ERROR_OK;
(*trace_data_p)->next = NULL;
(*trace_data_p)->chkpt0 = trace_buffer[256];
(*trace_data_p)->chkpt1 = trace_buffer[257];
- (*trace_data_p)->last_instruction = buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32);
+ (*trace_data_p)->last_instruction =
+ buf_get_u32(armv4_5->pc->value, 0, 32);
(*trace_data_p)->entries = malloc(sizeof(struct xscale_trace_entry) * (256 - j));
(*trace_data_p)->depth = 256 - j;
int i;
int num_regs = ARRAY_SIZE(xscale_reg_arch_info);
- (*cache_p) = armv4_5_build_reg_cache(target, armv4_5);
+ (*cache_p) = arm_build_reg_cache(target, armv4_5);
(*cache_p)->next = malloc(sizeof(struct reg_cache));
cache_p = &(*cache_p)->next;
xscale->dbr0_used = 0;
xscale->dbr1_used = 0;
+ LOG_INFO("%s: hardware has 2 breakpoints and 2 watchpoints",
+ target_name(target));
+
xscale->arm_bkpt = ARMV5_BKPT(0x0);
xscale->thumb_bkpt = ARMV5_T_BKPT(0x0) & 0xffff;
armv4_5->write_core_reg = xscale_write_core_reg;
armv4_5->full_context = xscale_full_context;
- armv4_5_init_arch_info(target, armv4_5);
+ arm_init_arch_info(target, armv4_5);
xscale->armv4_5_mmu.armv4_5_cache.ctype = -1;
xscale->armv4_5_mmu.get_ttb = xscale_get_ttb;
return ERROR_OK;
}
- bool icache;
- COMMAND_PARSE_BOOL(CMD_NAME, icache, "icache", "dcache");
-
+ bool icache = false;
+ if (strcmp(CMD_NAME, "icache") == 0)
+ icache = true;
if (CMD_ARGC >= 1)
{
bool enable;
COMMAND_PARSE_ENABLE(CMD_ARGV[0], enable);
- if (enable)
- xscale_enable_mmu_caches(target, 1, 0, 0);
- else
- xscale_disable_mmu_caches(target, 1, 0, 0);
- if (icache)
+ if (icache) {
xscale->armv4_5_mmu.armv4_5_cache.i_cache_enabled = enable;
- else
+ if (enable)
+ xscale_enable_mmu_caches(target, 0, 0, 1);
+ else
+ xscale_disable_mmu_caches(target, 0, 0, 1);
+ } else {
xscale->armv4_5_mmu.armv4_5_cache.d_u_cache_enabled = enable;
+ if (enable)
+ xscale_enable_mmu_caches(target, 0, 1, 0);
+ else
+ xscale_disable_mmu_caches(target, 0, 1, 0);
+ }
}
bool enabled = icache ?
/* if we enable the trace buffer in fill-once
* mode we know the address of the first instruction */
xscale->trace.pc_ok = 1;
- xscale->trace.current_pc = buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32);
+ xscale->trace.current_pc =
+ buf_get_u32(armv4_5->pc->value, 0, 32);
}
else
{
if (CMD_ARGC >= 2)
{
xscale->trace.image->base_address_set = 1;
- COMMAND_PARSE_NUMBER(int, CMD_ARGV[1], xscale->trace.image->base_address);
+ COMMAND_PARSE_NUMBER(llong, CMD_ARGV[1], xscale->trace.image->base_address);
}
else
{
static const struct command_registration xscale_exec_command_handlers[] = {
{
.name = "cache_info",
- .handler = &xscale_handle_cache_info_command,
- .mode = COMMAND_EXEC, NULL,
+ .handler = xscale_handle_cache_info_command,
+ .mode = COMMAND_EXEC,
+ .help = "display information about CPU caches",
},
-
{
.name = "mmu",
- .handler = &xscale_handle_mmu_command,
+ .handler = xscale_handle_mmu_command,
.mode = COMMAND_EXEC,
- .usage = "[enable|disable]",
.help = "enable or disable the MMU",
+ .usage = "['enable'|'disable']",
},
{
.name = "icache",
- .handler = &xscale_handle_idcache_command,
+ .handler = xscale_handle_idcache_command,
.mode = COMMAND_EXEC,
- .usage = "[enable|disable]",
- .help = "enable or disable the ICache",
+ .help = "display ICache state, optionally enabling or "
+ "disabling it",
+ .usage = "['enable'|'disable']",
},
{
.name = "dcache",
- .handler = &xscale_handle_idcache_command,
+ .handler = xscale_handle_idcache_command,
.mode = COMMAND_EXEC,
- .usage = "[enable|disable]",
- .help = "enable or disable the DCache",
+ .help = "display DCache state, optionally enabling or "
+ "disabling it",
+ .usage = "['enable'|'disable']",
},
-
{
.name = "vector_catch",
- .handler = &xscale_handle_vector_catch_command,
+ .handler = xscale_handle_vector_catch_command,
.mode = COMMAND_EXEC,
- .help = "mask of vectors that should be caught",
- .usage = "[<mask>]",
+ .help = "set or display 8-bit mask of vectors "
+ "that should trigger debug entry",
+ .usage = "[mask]",
},
{
.name = "vector_table",
- .handler = &xscale_handle_vector_table_command,
+ .handler = xscale_handle_vector_table_command,
.mode = COMMAND_EXEC,
- .usage = "<high|low> <index> <code>",
- .help = "set static code for exception handler entry",
+ .help = "set vector table entry in mini-ICache, "
+ "or display current tables",
+ .usage = "[('high'|'low') index code]",
},
-
{
.name = "trace_buffer",
- .handler = &xscale_handle_trace_buffer_command,
+ .handler = xscale_handle_trace_buffer_command,
.mode = COMMAND_EXEC,
- .usage = "<enable | disable> [fill [n]|wrap]",
+ .help = "display trace buffer status, enable or disable "
+ "tracing, and optionally reconfigure trace mode",
+ .usage = "['enable'|'disable' ['fill' number|'wrap']]",
},
{
.name = "dump_trace",
- .handler = &xscale_handle_dump_trace_command,
+ .handler = xscale_handle_dump_trace_command,
.mode = COMMAND_EXEC,
- .help = "dump content of trace buffer to <file>",
- .usage = "<file>",
+ .help = "dump content of trace buffer to file",
+ .usage = "filename",
},
{
.name = "analyze_trace",
- .handler = &xscale_handle_analyze_trace_buffer_command,
+ .handler = xscale_handle_analyze_trace_buffer_command,
.mode = COMMAND_EXEC,
.help = "analyze content of trace buffer",
+ .usage = "",
},
{
.name = "trace_image",
- .handler = &xscale_handle_trace_image_command,
- COMMAND_EXEC,
- .help = "load image from <file> [base address]",
- .usage = "<file> [address] [type]",
+ .handler = xscale_handle_trace_image_command,
+ .mode = COMMAND_EXEC,
+ .help = "load image from file to address (default 0)",
+ .usage = "filename [offset [filetype]]",
},
-
{
.name = "cp15",
- .handler = &xscale_handle_cp15,
+ .handler = xscale_handle_cp15,
.mode = COMMAND_EXEC,
- .help = "access coproc 15",
- .usage = "<register> [value]",
+ .help = "Read or write coprocessor 15 register.",
+ .usage = "register [value]",
},
COMMAND_REGISTRATION_DONE
};
static const struct command_registration xscale_any_command_handlers[] = {
{
.name = "debug_handler",
- .handler = &xscale_handle_debug_handler_command,
+ .handler = xscale_handle_debug_handler_command,
.mode = COMMAND_ANY,
- .usage = "<target#> <address>",
+ .help = "Change address used for debug handler.",
+ .usage = "target address",
},
{
.name = "cache_clean_address",
- .handler = &xscale_handle_cache_clean_address_command,
+ .handler = xscale_handle_cache_clean_address_command,
.mode = COMMAND_ANY,
+ .help = "Change address used for cleaning data cache.",
+ .usage = "address",
},
{
.chain = xscale_exec_command_handlers,
.deassert_reset = xscale_deassert_reset,
.soft_reset_halt = NULL,
- .get_gdb_reg_list = armv4_5_get_gdb_reg_list,
+ /* REVISIT on some cores, allow exporting iwmmxt registers ... */
+ .get_gdb_reg_list = arm_get_gdb_reg_list,
.read_memory = xscale_read_memory,
.read_phys_memory = xscale_read_phys_memory,
projects / fw / openocd / blobdiff