struct gdb_fileio_info *fileio_info);
static int target_gdb_fileio_end_default(struct target *target, int retcode,
int fileio_errno, bool ctrl_c);
-static int target_profiling_default(struct target *target, uint32_t *samples,
- uint32_t max_num_samples, uint32_t *num_samples, uint32_t seconds);
/* targets */
extern struct target_type arm7tdmi_target;
extern struct target_type arm11_target;
extern struct target_type ls1_sap_target;
extern struct target_type mips_m4k_target;
+extern struct target_type mips_mips64_target;
extern struct target_type avr_target;
extern struct target_type dsp563xx_target;
extern struct target_type dsp5680xx_target;
extern struct target_type riscv_target;
extern struct target_type mem_ap_target;
extern struct target_type esirisc_target;
+extern struct target_type arcv2_target;
static struct target_type *target_types[] = {
&arm7tdmi_target,
&riscv_target,
&mem_ap_target,
&esirisc_target,
-#if BUILD_TARGET64
+ &arcv2_target,
&aarch64_target,
-#endif
+ &mips_mips64_target,
NULL,
};
struct target *all_targets;
static struct target_event_callback *target_event_callbacks;
static struct target_timer_callback *target_timer_callbacks;
-LIST_HEAD(target_reset_callback_list);
-LIST_HEAD(target_trace_callback_list);
+static LIST_HEAD(target_reset_callback_list);
+static LIST_HEAD(target_trace_callback_list);
static const int polling_interval = 100;
static const Jim_Nvp nvp_assert[] = {
{ .value = ERROR_TARGET_TIMEOUT, .name = "err-timeout" },
{ .value = ERROR_TARGET_NOT_HALTED, .name = "err-not-halted" },
{ .value = ERROR_TARGET_FAILURE, .name = "err-failure" },
- { .value = ERROR_TARGET_UNALIGNED_ACCESS , .name = "err-unaligned-access" },
- { .value = ERROR_TARGET_DATA_ABORT , .name = "err-data-abort" },
- { .value = ERROR_TARGET_RESOURCE_NOT_AVAILABLE , .name = "err-resource-not-available" },
- { .value = ERROR_TARGET_TRANSLATION_FAULT , .name = "err-translation-fault" },
+ { .value = ERROR_TARGET_UNALIGNED_ACCESS, .name = "err-unaligned-access" },
+ { .value = ERROR_TARGET_DATA_ABORT, .name = "err-data-abort" },
+ { .value = ERROR_TARGET_RESOURCE_NOT_AVAILABLE, .name = "err-resource-not-available" },
+ { .value = ERROR_TARGET_TRANSLATION_FAULT, .name = "err-translation-fault" },
{ .value = ERROR_TARGET_NOT_RUNNING, .name = "err-not-running" },
{ .value = ERROR_TARGET_NOT_EXAMINED, .name = "err-not-examined" },
{ .value = -1, .name = NULL }
{ .value = TARGET_EVENT_RESUMED, .name = "resumed" },
{ .value = TARGET_EVENT_RESUME_START, .name = "resume-start" },
{ .value = TARGET_EVENT_RESUME_END, .name = "resume-end" },
+ { .value = TARGET_EVENT_STEP_START, .name = "step-start" },
+ { .value = TARGET_EVENT_STEP_END, .name = "step-end" },
{ .name = "gdb-start", .value = TARGET_EVENT_GDB_START },
{ .name = "gdb-end", .value = TARGET_EVENT_GDB_END },
{ .value = TARGET_EVENT_RESET_END, .name = "reset-end" },
{ .value = TARGET_EVENT_EXAMINE_START, .name = "examine-start" },
+ { .value = TARGET_EVENT_EXAMINE_FAIL, .name = "examine-fail" },
{ .value = TARGET_EVENT_EXAMINE_END, .name = "examine-end" },
{ .value = TARGET_EVENT_DEBUG_HALTED, .name = "debug-halted" },
{ .value = TARGET_EVENT_GDB_DETACH, .name = "gdb-detach" },
{ .value = TARGET_EVENT_GDB_FLASH_WRITE_START, .name = "gdb-flash-write-start" },
- { .value = TARGET_EVENT_GDB_FLASH_WRITE_END , .name = "gdb-flash-write-end" },
+ { .value = TARGET_EVENT_GDB_FLASH_WRITE_END, .name = "gdb-flash-write-end" },
{ .value = TARGET_EVENT_GDB_FLASH_ERASE_START, .name = "gdb-flash-erase-start" },
- { .value = TARGET_EVENT_GDB_FLASH_ERASE_END , .name = "gdb-flash-erase-end" },
+ { .value = TARGET_EVENT_GDB_FLASH_ERASE_END, .name = "gdb-flash-erase-end" },
{ .value = TARGET_EVENT_TRACE_CONFIG, .name = "trace-config" },
};
static const Jim_Nvp nvp_target_debug_reason[] = {
- { .name = "debug-request" , .value = DBG_REASON_DBGRQ },
- { .name = "breakpoint" , .value = DBG_REASON_BREAKPOINT },
- { .name = "watchpoint" , .value = DBG_REASON_WATCHPOINT },
+ { .name = "debug-request", .value = DBG_REASON_DBGRQ },
+ { .name = "breakpoint", .value = DBG_REASON_BREAKPOINT },
+ { .name = "watchpoint", .value = DBG_REASON_WATCHPOINT },
{ .name = "watchpoint-and-breakpoint", .value = DBG_REASON_WPTANDBKPT },
- { .name = "single-step" , .value = DBG_REASON_SINGLESTEP },
- { .name = "target-not-halted" , .value = DBG_REASON_NOTHALTED },
- { .name = "program-exit" , .value = DBG_REASON_EXIT },
- { .name = "undefined" , .value = DBG_REASON_UNDEFINED },
+ { .name = "single-step", .value = DBG_REASON_SINGLESTEP },
+ { .name = "target-not-halted", .value = DBG_REASON_NOTHALTED },
+ { .name = "program-exit", .value = DBG_REASON_EXIT },
+ { .name = "exception-catch", .value = DBG_REASON_EXC_CATCH },
+ { .name = "undefined", .value = DBG_REASON_UNDEFINED },
{ .name = NULL, .value = -1 },
};
static const Jim_Nvp nvp_reset_modes[] = {
{ .name = "unknown", .value = RESET_UNKNOWN },
- { .name = "run" , .value = RESET_RUN },
- { .name = "halt" , .value = RESET_HALT },
- { .name = "init" , .value = RESET_INIT },
- { .name = NULL , .value = -1 },
+ { .name = "run", .value = RESET_RUN },
+ { .name = "halt", .value = RESET_HALT },
+ { .name = "init", .value = RESET_INIT },
+ { .name = NULL, .value = -1 },
};
const char *debug_reason_name(struct target *t)
return x + 1;
}
+static void append_to_list_all_targets(struct target *target)
+{
+ struct target **t = &all_targets;
+
+ while (*t)
+ t = &((*t)->next);
+ *t = target;
+}
+
/* read a uint64_t from a buffer in target memory endianness */
uint64_t target_buffer_get_u64(struct target *target, const uint8_t *buffer)
{
return be_to_h_u16(buffer);
}
-/* read a uint8_t from a buffer in target memory endianness */
-static uint8_t target_buffer_get_u8(struct target *target, const uint8_t *buffer)
-{
- return *buffer & 0x0ff;
-}
-
/* write a uint64_t to a buffer in target memory endianness */
void target_buffer_set_u64(struct target *target, uint8_t *buffer, uint64_t value)
{
* @param address Optionally used as the program counter.
* @param handle_breakpoints True iff breakpoints at the resumption PC
* should be skipped. (For example, maybe execution was stopped by
- * such a breakpoint, in which case it would be counterprodutive to
+ * such a breakpoint, in which case it would be counterproductive to
* let it re-trigger.
* @param debug_execution False if all working areas allocated by OpenOCD
* should be released and/or restored to their original contents.
return retval;
}
-static int target_process_reset(struct command_context *cmd_ctx, enum target_reset_mode reset_mode)
+static int target_process_reset(struct command_invocation *cmd, enum target_reset_mode reset_mode)
{
char buf[100];
int retval;
jtag_poll_set_enabled(false);
sprintf(buf, "ocd_process_reset %s", n->name);
- retval = Jim_Eval(cmd_ctx->interp, buf);
+ retval = Jim_Eval(cmd->ctx->interp, buf);
jtag_poll_set_enabled(save_poll);
if (retval != JIM_OK) {
- Jim_MakeErrorMessage(cmd_ctx->interp);
- command_print(NULL, "%s\n", Jim_GetString(Jim_GetResult(cmd_ctx->interp), NULL));
+ Jim_MakeErrorMessage(cmd->ctx->interp);
+ command_print(cmd, "%s", Jim_GetString(Jim_GetResult(cmd->ctx->interp), NULL));
return ERROR_FAIL;
}
return ERROR_OK;
}
+/* Equivalent Tcl code arp_examine_one is in src/target/startup.tcl
+ * Keep in sync */
int target_examine_one(struct target *target)
{
target_call_event_callbacks(target, TARGET_EVENT_EXAMINE_START);
int retval = target->type->examine(target);
- if (retval != ERROR_OK)
+ if (retval != ERROR_OK) {
+ target_call_event_callbacks(target, TARGET_EVENT_EXAMINE_FAIL);
return retval;
+ }
target_call_event_callbacks(target, TARGET_EVENT_EXAMINE_END);
if (target->defer_examine)
continue;
- retval = target_examine_one(target);
- if (retval != ERROR_OK)
- return retval;
+ int retval2 = target_examine_one(target);
+ if (retval2 != ERROR_OK) {
+ LOG_WARNING("target %s examination failed", target_name(target));
+ retval = retval2;
+ }
}
return retval;
}
* programming. The exact delay shouldn't matter as long as it's
* less than buffer size / flash speed. This is very unlikely to
* run when using high latency connections such as USB. */
- alive_sleep(10);
+ alive_sleep(2);
/* to stop an infinite loop on some targets check and increment a timeout
* this issue was observed on a stellaris using the new ICDI interface */
- if (timeout++ >= 500) {
+ if (timeout++ >= 2500) {
LOG_ERROR("timeout waiting for algorithm, a target reset is recommended");
return ERROR_FLASH_OPERATION_FAILED;
}
if (thisrun_bytes > count * block_size)
thisrun_bytes = count * block_size;
+ /* Force end of large blocks to be word aligned */
+ if (thisrun_bytes >= 16)
+ thisrun_bytes -= (rp + thisrun_bytes) & 0x03;
+
/* Write data to fifo */
retval = target_write_buffer(target, wp, thisrun_bytes, buffer);
if (retval != ERROR_OK)
return retval;
}
+int target_run_read_async_algorithm(struct target *target,
+ uint8_t *buffer, uint32_t count, int block_size,
+ int num_mem_params, struct mem_param *mem_params,
+ int num_reg_params, struct reg_param *reg_params,
+ uint32_t buffer_start, uint32_t buffer_size,
+ uint32_t entry_point, uint32_t exit_point, void *arch_info)
+{
+ int retval;
+ int timeout = 0;
+
+ const uint8_t *buffer_orig = buffer;
+
+ /* Set up working area. First word is write pointer, second word is read pointer,
+ * rest is fifo data area. */
+ uint32_t wp_addr = buffer_start;
+ uint32_t rp_addr = buffer_start + 4;
+ uint32_t fifo_start_addr = buffer_start + 8;
+ uint32_t fifo_end_addr = buffer_start + buffer_size;
+
+ uint32_t wp = fifo_start_addr;
+ uint32_t rp = fifo_start_addr;
+
+ /* validate block_size is 2^n */
+ assert(!block_size || !(block_size & (block_size - 1)));
+
+ retval = target_write_u32(target, wp_addr, wp);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = target_write_u32(target, rp_addr, rp);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* Start up algorithm on target */
+ retval = target_start_algorithm(target, num_mem_params, mem_params,
+ num_reg_params, reg_params,
+ entry_point,
+ exit_point,
+ arch_info);
+
+ if (retval != ERROR_OK) {
+ LOG_ERROR("error starting target flash read algorithm");
+ return retval;
+ }
+
+ while (count > 0) {
+ retval = target_read_u32(target, wp_addr, &wp);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("failed to get write pointer");
+ break;
+ }
+
+ LOG_DEBUG("offs 0x%zx count 0x%" PRIx32 " wp 0x%" PRIx32 " rp 0x%" PRIx32,
+ (size_t) (buffer - buffer_orig), count, wp, rp);
+
+ if (wp == 0) {
+ LOG_ERROR("flash read algorithm aborted by target");
+ retval = ERROR_FLASH_OPERATION_FAILED;
+ break;
+ }
+
+ if (((wp - fifo_start_addr) & (block_size - 1)) || wp < fifo_start_addr || wp >= fifo_end_addr) {
+ LOG_ERROR("corrupted fifo write pointer 0x%" PRIx32, wp);
+ break;
+ }
+
+ /* Count the number of bytes available in the fifo without
+ * crossing the wrap around. */
+ uint32_t thisrun_bytes;
+ if (wp >= rp)
+ thisrun_bytes = wp - rp;
+ else
+ thisrun_bytes = fifo_end_addr - rp;
+
+ if (thisrun_bytes == 0) {
+ /* Throttle polling a bit if transfer is (much) faster than flash
+ * reading. The exact delay shouldn't matter as long as it's
+ * less than buffer size / flash speed. This is very unlikely to
+ * run when using high latency connections such as USB. */
+ alive_sleep(2);
+
+ /* to stop an infinite loop on some targets check and increment a timeout
+ * this issue was observed on a stellaris using the new ICDI interface */
+ if (timeout++ >= 2500) {
+ LOG_ERROR("timeout waiting for algorithm, a target reset is recommended");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+ continue;
+ }
+
+ /* Reset our timeout */
+ timeout = 0;
+
+ /* Limit to the amount of data we actually want to read */
+ if (thisrun_bytes > count * block_size)
+ thisrun_bytes = count * block_size;
+
+ /* Force end of large blocks to be word aligned */
+ if (thisrun_bytes >= 16)
+ thisrun_bytes -= (rp + thisrun_bytes) & 0x03;
+
+ /* Read data from fifo */
+ retval = target_read_buffer(target, rp, thisrun_bytes, buffer);
+ if (retval != ERROR_OK)
+ break;
+
+ /* Update counters and wrap write pointer */
+ buffer += thisrun_bytes;
+ count -= thisrun_bytes / block_size;
+ rp += thisrun_bytes;
+ if (rp >= fifo_end_addr)
+ rp = fifo_start_addr;
+
+ /* Store updated write pointer to target */
+ retval = target_write_u32(target, rp_addr, rp);
+ if (retval != ERROR_OK)
+ break;
+
+ /* Avoid GDB timeouts */
+ keep_alive();
+
+ }
+
+ if (retval != ERROR_OK) {
+ /* abort flash write algorithm on target */
+ target_write_u32(target, rp_addr, 0);
+ }
+
+ int retval2 = target_wait_algorithm(target, num_mem_params, mem_params,
+ num_reg_params, reg_params,
+ exit_point,
+ 10000,
+ arch_info);
+
+ if (retval2 != ERROR_OK) {
+ LOG_ERROR("error waiting for target flash write algorithm");
+ retval = retval2;
+ }
+
+ if (retval == ERROR_OK) {
+ /* check if algorithm set wp = 0 after fifo writer loop finished */
+ retval = target_read_u32(target, wp_addr, &wp);
+ if (retval == ERROR_OK && wp == 0) {
+ LOG_ERROR("flash read algorithm aborted by target");
+ retval = ERROR_FLASH_OPERATION_FAILED;
+ }
+ }
+
+ return retval;
+}
+
int target_read_memory(struct target *target,
target_addr_t address, uint32_t size, uint32_t count, uint8_t *buffer)
{
struct reg **reg_list[], int *reg_list_size,
enum target_register_class reg_class)
{
- return target->type->get_gdb_reg_list(target, reg_list, reg_list_size, reg_class);
+ int result = ERROR_FAIL;
+
+ if (!target_was_examined(target)) {
+ LOG_ERROR("Target not examined yet");
+ goto done;
+ }
+
+ result = target->type->get_gdb_reg_list(target, reg_list,
+ reg_list_size, reg_class);
+
+done:
+ if (result != ERROR_OK) {
+ *reg_list = NULL;
+ *reg_list_size = 0;
+ }
+ return result;
+}
+
+int target_get_gdb_reg_list_noread(struct target *target,
+ struct reg **reg_list[], int *reg_list_size,
+ enum target_register_class reg_class)
+{
+ if (target->type->get_gdb_reg_list_noread &&
+ target->type->get_gdb_reg_list_noread(target, reg_list,
+ reg_list_size, reg_class) == ERROR_OK)
+ return ERROR_OK;
+ return target_get_gdb_reg_list(target, reg_list, reg_list_size, reg_class);
}
bool target_supports_gdb_connection(struct target *target)
{
/*
- * based on current code, we can simply exclude all the targets that
- * don't provide get_gdb_reg_list; this could change with new targets.
+ * exclude all the targets that don't provide get_gdb_reg_list
+ * or that have explicit gdb_max_connection == 0
*/
- return !!target->type->get_gdb_reg_list;
+ return !!target->type->get_gdb_reg_list && !!target->gdb_max_connections;
}
int target_step(struct target *target,
int current, target_addr_t address, int handle_breakpoints)
{
- return target->type->step(target, current, address, handle_breakpoints);
+ int retval;
+
+ target_call_event_callbacks(target, TARGET_EVENT_STEP_START);
+
+ retval = target->type->step(target, current, address, handle_breakpoints);
+ if (retval != ERROR_OK)
+ return retval;
+
+ target_call_event_callbacks(target, TARGET_EVENT_STEP_END);
+
+ return retval;
}
int target_get_gdb_fileio_info(struct target *target, struct gdb_fileio_info *fileio_info)
return target->type->gdb_fileio_end(target, retcode, fileio_errno, ctrl_c);
}
-int target_profiling(struct target *target, uint32_t *samples,
+target_addr_t target_address_max(struct target *target)
+{
+ unsigned bits = target_address_bits(target);
+ if (sizeof(target_addr_t) * 8 == bits)
+ return (target_addr_t) -1;
+ else
+ return (((target_addr_t) 1) << bits) - 1;
+}
+
+unsigned target_address_bits(struct target *target)
+{
+ if (target->type->address_bits)
+ return target->type->address_bits(target);
+ return 32;
+}
+
+static int target_profiling(struct target *target, uint32_t *samples,
uint32_t max_num_samples, uint32_t *num_samples, uint32_t seconds)
{
- if (target->state != TARGET_HALTED) {
- LOG_WARNING("target %s is not halted (profiling)", target->cmd_name);
- return ERROR_TARGET_NOT_HALTED;
- }
return target->type->profiling(target, samples, max_num_samples,
num_samples, seconds);
}
target_call_event_callbacks(target, TARGET_EVENT_GDB_HALT);
}
- LOG_DEBUG("target event %i (%s)", event,
- Jim_Nvp_value2name_simple(nvp_target_event, event)->name);
+ LOG_DEBUG("target event %i (%s) for core %s", event,
+ Jim_Nvp_value2name_simple(nvp_target_event, event)->name,
+ target_name(target));
target_handle_event(target, event);
* next item; initially, that's a standalone "root of the
* list" variable. */
struct target_timer_callback **callback = &target_timer_callbacks;
- while (*callback) {
+ while (callback && *callback) {
if ((*callback)->removed) {
struct target_timer_callback *p = *callback;
*callback = (*callback)->next;
/* If backup memory was allocated to this area, it has the wrong size
* now so free it and it will be reallocated if/when needed */
- if (area->backup) {
- free(area->backup);
- area->backup = NULL;
- }
+ free(area->backup);
+ area->backup = NULL;
}
}
/* Remove the last */
struct working_area *to_be_freed = c->next;
c->next = c->next->next;
- if (to_be_freed->backup)
- free(to_be_freed->backup);
+ free(to_be_freed->backup);
free(to_be_freed);
/* If backup memory was allocated to the remaining area, it's has
* the wrong size now */
- if (c->backup) {
- free(c->backup);
- c->backup = NULL;
- }
+ free(c->backup);
+ c->backup = NULL;
} else {
c = c->next;
}
if (target->type->deinit_target)
target->type->deinit_target(target);
- if (target->semihosting)
- free(target->semihosting);
+ free(target->semihosting);
jtag_unregister_event_callback(jtag_enable_callback, target);
target->smp = 0;
}
+ rtos_destroy(target);
+
free(target->gdb_port_override);
free(target->type);
free(target->trace_info);
return ERROR_OK;
}
-static int target_profiling_default(struct target *target, uint32_t *samples,
+int target_profiling_default(struct target *target, uint32_t *samples,
uint32_t max_num_samples, uint32_t *num_samples, uint32_t seconds)
{
struct timeval timeout, now;
*/
int target_write_buffer(struct target *target, target_addr_t address, uint32_t size, const uint8_t *buffer)
{
- LOG_DEBUG("writing buffer of %" PRIi32 " byte at " TARGET_ADDR_FMT,
+ LOG_DEBUG("writing buffer of %" PRIu32 " byte at " TARGET_ADDR_FMT,
size, address);
if (!target_was_examined(target)) {
*/
int target_read_buffer(struct target *target, target_addr_t address, uint32_t size, uint8_t *buffer)
{
- LOG_DEBUG("reading buffer of %" PRIi32 " byte at " TARGET_ADDR_FMT,
+ LOG_DEBUG("reading buffer of %" PRIu32 " byte at " TARGET_ADDR_FMT,
size, address);
if (!target_was_examined(target)) {
return ERROR_OK;
}
-int target_checksum_memory(struct target *target, target_addr_t address, uint32_t size, uint32_t* crc)
+int target_checksum_memory(struct target *target, target_addr_t address, uint32_t size, uint32_t *crc)
{
uint8_t *buffer;
int retval;
if (retval != ERROR_OK) {
buffer = malloc(size);
if (buffer == NULL) {
- LOG_ERROR("error allocating buffer for section (%" PRId32 " bytes)", size);
+ LOG_ERROR("error allocating buffer for section (%" PRIu32 " bytes)", size);
return ERROR_COMMAND_SYNTAX_ERROR;
}
retval = target_read_buffer(target, address, size, buffer);
return retval;
}
-static int find_target(struct command_context *cmd_ctx, const char *name)
+static int find_target(struct command_invocation *cmd, const char *name)
{
struct target *target = get_target(name);
if (target == NULL) {
- LOG_ERROR("Target: %s is unknown, try one of:\n", name);
+ command_print(cmd, "Target: %s is unknown, try one of:\n", name);
return ERROR_FAIL;
}
if (!target->tap->enabled) {
- LOG_USER("Target: TAP %s is disabled, "
+ command_print(cmd, "Target: TAP %s is disabled, "
"can't be the current target\n",
target->tap->dotted_name);
return ERROR_FAIL;
}
- cmd_ctx->current_target = target;
- if (cmd_ctx->current_target_override)
- cmd_ctx->current_target_override = target;
+ cmd->ctx->current_target = target;
+ if (cmd->ctx->current_target_override)
+ cmd->ctx->current_target_override = target;
return ERROR_OK;
}
{
int retval = ERROR_OK;
if (CMD_ARGC == 1) {
- retval = find_target(CMD_CTX, CMD_ARGV[0]);
+ retval = find_target(CMD, CMD_ARGV[0]);
if (retval == ERROR_OK) {
/* we're done! */
return retval;
}
struct target *target = all_targets;
- command_print(CMD_CTX, " TargetName Type Endian TapName State ");
- command_print(CMD_CTX, "-- ------------------ ---------- ------ ------------------ ------------");
+ command_print(CMD, " TargetName Type Endian TapName State ");
+ command_print(CMD, "-- ------------------ ---------- ------ ------------------ ------------");
while (target) {
const char *state;
char marker = ' ';
marker = '*';
/* keep columns lined up to match the headers above */
- command_print(CMD_CTX,
+ command_print(CMD,
"%2d%c %-18s %-10s %-6s %-18s %s",
target->target_number,
marker,
while (cache) {
unsigned i;
- command_print(CMD_CTX, "===== %s", cache->name);
+ command_print(CMD, "===== %s", cache->name);
for (i = 0, reg = cache->reg_list;
i < cache->num_regs;
continue;
/* only print cached values if they are valid */
if (reg->valid) {
- value = buf_to_str(reg->value,
- reg->size, 16);
- command_print(CMD_CTX,
+ value = buf_to_hex_str(reg->value,
+ reg->size);
+ command_print(CMD,
"(%i) %s (/%" PRIu32 "): 0x%s%s",
count, reg->name,
reg->size, value,
: "");
free(value);
} else {
- command_print(CMD_CTX, "(%i) %s (/%" PRIu32 ")",
+ command_print(CMD, "(%i) %s (/%" PRIu32 ")",
count, reg->name,
- reg->size) ;
+ reg->size);
}
}
cache = cache->next;
}
if (!reg) {
- command_print(CMD_CTX, "%i is out of bounds, the current target "
+ command_print(CMD, "%i is out of bounds, the current target "
"has only %i registers (0 - %i)", num, count, count - 1);
return ERROR_OK;
}
if (reg->valid == 0)
reg->type->get(reg);
- value = buf_to_str(reg->value, reg->size, 16);
- command_print(CMD_CTX, "%s (/%i): 0x%s", reg->name, (int)(reg->size), value);
+ value = buf_to_hex_str(reg->value, reg->size);
+ command_print(CMD, "%s (/%i): 0x%s", reg->name, (int)(reg->size), value);
free(value);
return ERROR_OK;
}
reg->type->set(reg, buf);
- value = buf_to_str(reg->value, reg->size, 16);
- command_print(CMD_CTX, "%s (/%i): 0x%s", reg->name, (int)(reg->size), value);
+ value = buf_to_hex_str(reg->value, reg->size);
+ command_print(CMD, "%s (/%i): 0x%s", reg->name, (int)(reg->size), value);
free(value);
free(buf);
return ERROR_COMMAND_SYNTAX_ERROR;
not_found:
- command_print(CMD_CTX, "register %s not found in current target", CMD_ARGV[0]);
+ command_print(CMD, "register %s not found in current target", CMD_ARGV[0]);
return ERROR_OK;
}
struct target *target = get_current_target(CMD_CTX);
if (CMD_ARGC == 0) {
- command_print(CMD_CTX, "background polling: %s",
+ command_print(CMD, "background polling: %s",
jtag_poll_get_enabled() ? "on" : "off");
- command_print(CMD_CTX, "TAP: %s (%s)",
+ command_print(CMD, "TAP: %s (%s)",
target->tap->dotted_name,
target->tap->enabled ? "enabled" : "disabled");
if (!target->tap->enabled)
}
/* reset *all* targets */
- return target_process_reset(CMD_CTX, reset_mode);
+ return target_process_reset(CMD, reset_mode);
}
struct target *target = get_current_target(CMD_CTX);
- return target->type->step(target, current_pc, addr, 1);
+ return target_step(target, current_pc, addr, 1);
}
-static void handle_md_output(struct command_context *cmd_ctx,
+void target_handle_md_output(struct command_invocation *cmd,
struct target *target, target_addr_t address, unsigned size,
unsigned count, const uint8_t *buffer)
{
value_fmt, value);
if ((i % line_modulo == line_modulo - 1) || (i == count - 1)) {
- command_print(cmd_ctx, "%s", output);
+ command_print(cmd, "%s", output);
output_len = 0;
}
}
struct target *target = get_current_target(CMD_CTX);
int retval = fn(target, address, size, count, buffer);
if (ERROR_OK == retval)
- handle_md_output(CMD_CTX, target, address, size, count, buffer);
+ target_handle_md_output(CMD, target, address, size, count, buffer);
free(buffer);
target_addr_t address;
COMMAND_PARSE_ADDRESS(CMD_ARGV[0], address);
- target_addr_t value;
- COMMAND_PARSE_ADDRESS(CMD_ARGV[1], value);
+ uint64_t value;
+ COMMAND_PARSE_NUMBER(u64, CMD_ARGV[1], value);
unsigned count = 1;
if (CMD_ARGC == 3)
target_addr_t addr;
COMMAND_PARSE_ADDRESS(CMD_ARGV[1], addr);
image->base_address = addr;
- image->base_address_set = 1;
+ image->base_address_set = true;
} else
- image->base_address_set = 0;
+ image->base_address_set = false;
- image->start_address_set = 0;
+ image->start_address_set = false;
if (CMD_ARGC >= 4)
COMMAND_PARSE_ADDRESS(CMD_ARGV[3], *min_address);
uint32_t image_size;
target_addr_t min_address = 0;
target_addr_t max_address = -1;
- int i;
struct image image;
int retval = CALL_COMMAND_HANDLER(parse_load_image_command_CMD_ARGV,
image_size = 0x0;
retval = ERROR_OK;
- for (i = 0; i < image.num_sections; i++) {
+ for (unsigned int i = 0; i < image.num_sections; i++) {
buffer = malloc(image.sections[i].size);
if (buffer == NULL) {
- command_print(CMD_CTX,
+ command_print(CMD,
"error allocating buffer for section (%d bytes)",
(int)(image.sections[i].size));
retval = ERROR_FAIL;
uint32_t offset = 0;
uint32_t length = buf_cnt;
- /* DANGER!!! beware of unsigned comparision here!!! */
+ /* DANGER!!! beware of unsigned comparison here!!! */
if ((image.sections[i].base_address + buf_cnt >= min_address) &&
(image.sections[i].base_address < max_address)) {
break;
}
image_size += length;
- command_print(CMD_CTX, "%u bytes written at address " TARGET_ADDR_FMT "",
+ command_print(CMD, "%u bytes written at address " TARGET_ADDR_FMT "",
(unsigned int)length,
image.sections[i].base_address + offset);
}
}
if ((ERROR_OK == retval) && (duration_measure(&bench) == ERROR_OK)) {
- command_print(CMD_CTX, "downloaded %" PRIu32 " bytes "
+ command_print(CMD, "downloaded %" PRIu32 " bytes "
"in %fs (%0.3f KiB/s)", image_size,
duration_elapsed(&bench), duration_kbps(&bench, image_size));
}
retval = fileio_size(fileio, &filesize);
if (retval != ERROR_OK)
return retval;
- command_print(CMD_CTX,
+ command_print(CMD,
"dumped %zu bytes in %fs (%0.3f KiB/s)", filesize,
duration_elapsed(&bench), duration_kbps(&bench, filesize));
}
uint8_t *buffer;
size_t buf_cnt;
uint32_t image_size;
- int i;
int retval;
uint32_t checksum = 0;
uint32_t mem_checksum = 0;
target_addr_t addr;
COMMAND_PARSE_ADDRESS(CMD_ARGV[1], addr);
image.base_address = addr;
- image.base_address_set = 1;
+ image.base_address_set = true;
} else {
- image.base_address_set = 0;
+ image.base_address_set = false;
image.base_address = 0x0;
}
- image.start_address_set = 0;
+ image.start_address_set = false;
retval = image_open(&image, CMD_ARGV[0], (CMD_ARGC == 3) ? CMD_ARGV[2] : NULL);
if (retval != ERROR_OK)
image_size = 0x0;
int diffs = 0;
retval = ERROR_OK;
- for (i = 0; i < image.num_sections; i++) {
+ for (unsigned int i = 0; i < image.num_sections; i++) {
buffer = malloc(image.sections[i].size);
if (buffer == NULL) {
- command_print(CMD_CTX,
- "error allocating buffer for section (%d bytes)",
- (int)(image.sections[i].size));
+ command_print(CMD,
+ "error allocating buffer for section (%" PRIu32 " bytes)",
+ image.sections[i].size);
break;
}
retval = image_read_section(&image, i, 0x0, image.sections[i].size, buffer, &buf_cnt);
data = malloc(buf_cnt);
- /* Can we use 32bit word accesses? */
- int size = 1;
- int count = buf_cnt;
- if ((count % 4) == 0) {
- size *= 4;
- count /= 4;
- }
- retval = target_read_memory(target, image.sections[i].base_address, size, count, data);
+ retval = target_read_buffer(target, image.sections[i].base_address, buf_cnt, data);
if (retval == ERROR_OK) {
uint32_t t;
for (t = 0; t < buf_cnt; t++) {
if (data[t] != buffer[t]) {
- command_print(CMD_CTX,
+ command_print(CMD,
"diff %d address 0x%08x. Was 0x%02x instead of 0x%02x",
diffs,
(unsigned)(t + image.sections[i].base_address),
data[t],
buffer[t]);
if (diffs++ >= 127) {
- command_print(CMD_CTX, "More than 128 errors, the rest are not printed.");
+ command_print(CMD, "More than 128 errors, the rest are not printed.");
free(data);
free(buffer);
goto done;
free(data);
}
} else {
- command_print(CMD_CTX, "address " TARGET_ADDR_FMT " length 0x%08zx",
+ command_print(CMD, "address " TARGET_ADDR_FMT " length 0x%08zx",
image.sections[i].base_address,
buf_cnt);
}
image_size += buf_cnt;
}
if (diffs > 0)
- command_print(CMD_CTX, "No more differences found.");
+ command_print(CMD, "No more differences found.");
done:
if (diffs > 0)
retval = ERROR_FAIL;
if ((ERROR_OK == retval) && (duration_measure(&bench) == ERROR_OK)) {
- command_print(CMD_CTX, "verified %" PRIu32 " bytes "
+ command_print(CMD, "verified %" PRIu32 " bytes "
"in %fs (%0.3f KiB/s)", image_size,
duration_elapsed(&bench), duration_kbps(&bench, image_size));
}
return CALL_COMMAND_HANDLER(handle_verify_image_command_internal, IMAGE_TEST);
}
-static int handle_bp_command_list(struct command_context *cmd_ctx)
+static int handle_bp_command_list(struct command_invocation *cmd)
{
- struct target *target = get_current_target(cmd_ctx);
+ struct target *target = get_current_target(cmd->ctx);
struct breakpoint *breakpoint = target->breakpoints;
while (breakpoint) {
if (breakpoint->type == BKPT_SOFT) {
- char *buf = buf_to_str(breakpoint->orig_instr,
- breakpoint->length, 16);
- command_print(cmd_ctx, "IVA breakpoint: " TARGET_ADDR_FMT ", 0x%x, %i, 0x%s",
+ char *buf = buf_to_hex_str(breakpoint->orig_instr,
+ breakpoint->length);
+ command_print(cmd, "IVA breakpoint: " TARGET_ADDR_FMT ", 0x%x, %i, 0x%s",
breakpoint->address,
breakpoint->length,
breakpoint->set, buf);
free(buf);
} else {
if ((breakpoint->address == 0) && (breakpoint->asid != 0))
- command_print(cmd_ctx, "Context breakpoint: 0x%8.8" PRIx32 ", 0x%x, %i",
+ command_print(cmd, "Context breakpoint: 0x%8.8" PRIx32 ", 0x%x, %i",
breakpoint->asid,
breakpoint->length, breakpoint->set);
else if ((breakpoint->address != 0) && (breakpoint->asid != 0)) {
- command_print(cmd_ctx, "Hybrid breakpoint(IVA): " TARGET_ADDR_FMT ", 0x%x, %i",
+ command_print(cmd, "Hybrid breakpoint(IVA): " TARGET_ADDR_FMT ", 0x%x, %i",
breakpoint->address,
breakpoint->length, breakpoint->set);
- command_print(cmd_ctx, "\t|--->linked with ContextID: 0x%8.8" PRIx32,
+ command_print(cmd, "\t|--->linked with ContextID: 0x%8.8" PRIx32,
breakpoint->asid);
} else
- command_print(cmd_ctx, "Breakpoint(IVA): " TARGET_ADDR_FMT ", 0x%x, %i",
+ command_print(cmd, "Breakpoint(IVA): " TARGET_ADDR_FMT ", 0x%x, %i",
breakpoint->address,
breakpoint->length, breakpoint->set);
}
return ERROR_OK;
}
-static int handle_bp_command_set(struct command_context *cmd_ctx,
+static int handle_bp_command_set(struct command_invocation *cmd,
target_addr_t addr, uint32_t asid, uint32_t length, int hw)
{
- struct target *target = get_current_target(cmd_ctx);
+ struct target *target = get_current_target(cmd->ctx);
int retval;
if (asid == 0) {
retval = breakpoint_add(target, addr, length, hw);
/* error is always logged in breakpoint_add(), do not print it again */
if (ERROR_OK == retval)
- command_print(cmd_ctx, "breakpoint set at " TARGET_ADDR_FMT "", addr);
+ command_print(cmd, "breakpoint set at " TARGET_ADDR_FMT "", addr);
} else if (addr == 0) {
if (target->type->add_context_breakpoint == NULL) {
retval = context_breakpoint_add(target, asid, length, hw);
/* error is always logged in context_breakpoint_add(), do not print it again */
if (ERROR_OK == retval)
- command_print(cmd_ctx, "Context breakpoint set at 0x%8.8" PRIx32 "", asid);
+ command_print(cmd, "Context breakpoint set at 0x%8.8" PRIx32 "", asid);
} else {
if (target->type->add_hybrid_breakpoint == NULL) {
retval = hybrid_breakpoint_add(target, addr, asid, length, hw);
/* error is always logged in hybrid_breakpoint_add(), do not print it again */
if (ERROR_OK == retval)
- command_print(cmd_ctx, "Hybrid breakpoint set at 0x%8.8" PRIx32 "", asid);
+ command_print(cmd, "Hybrid breakpoint set at 0x%8.8" PRIx32 "", asid);
}
return retval;
}
switch (CMD_ARGC) {
case 0:
- return handle_bp_command_list(CMD_CTX);
+ return handle_bp_command_list(CMD);
case 2:
asid = 0;
COMMAND_PARSE_ADDRESS(CMD_ARGV[0], addr);
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], length);
- return handle_bp_command_set(CMD_CTX, addr, asid, length, hw);
+ return handle_bp_command_set(CMD, addr, asid, length, hw);
case 3:
if (strcmp(CMD_ARGV[2], "hw") == 0) {
COMMAND_PARSE_ADDRESS(CMD_ARGV[0], addr);
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], length);
asid = 0;
- return handle_bp_command_set(CMD_CTX, addr, asid, length, hw);
+ return handle_bp_command_set(CMD, addr, asid, length, hw);
} else if (strcmp(CMD_ARGV[2], "hw_ctx") == 0) {
hw = BKPT_HARD;
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], asid);
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], length);
addr = 0;
- return handle_bp_command_set(CMD_CTX, addr, asid, length, hw);
+ return handle_bp_command_set(CMD, addr, asid, length, hw);
}
/* fallthrough */
case 4:
COMMAND_PARSE_ADDRESS(CMD_ARGV[0], addr);
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], asid);
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], length);
- return handle_bp_command_set(CMD_CTX, addr, asid, length, hw);
+ return handle_bp_command_set(CMD, addr, asid, length, hw);
default:
return ERROR_COMMAND_SYNTAX_ERROR;
if (CMD_ARGC != 1)
return ERROR_COMMAND_SYNTAX_ERROR;
- target_addr_t addr;
- COMMAND_PARSE_ADDRESS(CMD_ARGV[0], addr);
-
struct target *target = get_current_target(CMD_CTX);
- breakpoint_remove(target, addr);
+
+ if (!strcmp(CMD_ARGV[0], "all")) {
+ breakpoint_remove_all(target);
+ } else {
+ target_addr_t addr;
+ COMMAND_PARSE_ADDRESS(CMD_ARGV[0], addr);
+
+ breakpoint_remove(target, addr);
+ }
return ERROR_OK;
}
struct watchpoint *watchpoint = target->watchpoints;
while (watchpoint) {
- command_print(CMD_CTX, "address: " TARGET_ADDR_FMT
+ command_print(CMD, "address: " TARGET_ADDR_FMT
", len: 0x%8.8" PRIx32
", r/w/a: %i, value: 0x%8.8" PRIx32
", mask: 0x%8.8" PRIx32,
struct target *target = get_current_target(CMD_CTX);
int retval = target->type->virt2phys(target, va, &pa);
if (retval == ERROR_OK)
- command_print(CMD_CTX, "Physical address " TARGET_ADDR_FMT "", pa);
+ command_print(CMD, "Physical address " TARGET_ADDR_FMT "", pa);
return retval;
}
uint32_t offset;
uint32_t num_of_samples;
int retval = ERROR_OK;
+ bool halted_before_profiling = target->state == TARGET_HALTED;
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], offset);
free(samples);
return retval;
}
- if (target->state == TARGET_RUNNING) {
+
+ if (target->state == TARGET_RUNNING && halted_before_profiling) {
+ /* The target was halted before we started and is running now. Halt it,
+ * for consistency. */
retval = target_halt(target);
if (retval != ERROR_OK) {
free(samples);
return retval;
}
+ } else if (target->state == TARGET_HALTED && !halted_before_profiling) {
+ /* The target was running before we started and is halted now. Resume
+ * it, for consistency. */
+ retval = target_resume(target, 1, 0, 0, 0);
+ if (retval != ERROR_OK) {
+ free(samples);
+ return retval;
+ }
}
retval = target_poll(target);
write_gmon(samples, num_of_samples, CMD_ARGV[1],
with_range, start_address, end_address, target, duration_ms);
- command_print(CMD_CTX, "Wrote %s", CMD_ARGV[1]);
+ command_print(CMD, "Wrote %s", CMD_ARGV[1]);
free(samples);
return retval;
} else {
char buf[100];
Jim_SetResult(interp, Jim_NewEmptyStringObj(interp));
- sprintf(buf, "mem2array address: 0x%08" PRIx32 " is not aligned for %" PRId32 " byte reads",
+ sprintf(buf, "mem2array address: 0x%08" PRIx32 " is not aligned for %" PRIu32 " byte reads",
addr,
width);
Jim_AppendStrings(interp, Jim_GetResult(interp), buf, NULL);
retval = target_read_memory(target, addr, width, count, buffer);
if (retval != ERROR_OK) {
/* BOO !*/
- LOG_ERROR("mem2array: Read @ 0x%08" PRIx32 ", w=%" PRId32 ", cnt=%" PRId32 ", failed",
+ LOG_ERROR("mem2array: Read @ 0x%08" PRIx32 ", w=%" PRIu32 ", cnt=%" PRIu32 ", failed",
addr,
width,
count);
} else {
char buf[100];
Jim_SetResult(interp, Jim_NewEmptyStringObj(interp));
- sprintf(buf, "array2mem address: 0x%08" PRIx32 " is not aligned for %" PRId32 " byte reads",
+ sprintf(buf, "array2mem address: 0x%08" PRIx32 " is not aligned for %" PRIu32 " byte reads",
addr,
width);
Jim_AppendStrings(interp, Jim_GetResult(interp), buf, NULL);
retval = target_write_memory(target, addr, width, count, buffer);
if (retval != ERROR_OK) {
/* BOO !*/
- LOG_ERROR("array2mem: Write @ 0x%08" PRIx32 ", w=%" PRId32 ", cnt=%" PRId32 ", failed",
+ LOG_ERROR("array2mem: Write @ 0x%08" PRIx32 ", w=%" PRIu32 ", cnt=%" PRIu32 ", failed",
addr,
width,
count);
void target_handle_event(struct target *target, enum target_event e)
{
struct target_event_action *teap;
+ int retval;
for (teap = target->event_action; teap != NULL; teap = teap->next) {
if (teap->event == e) {
struct target *saved_target_override = cmd_ctx->current_target_override;
cmd_ctx->current_target_override = target;
- if (Jim_EvalObj(teap->interp, teap->body) != JIM_OK) {
- Jim_MakeErrorMessage(teap->interp);
- command_print(NULL, "%s\n", Jim_GetString(Jim_GetResult(teap->interp), NULL));
- }
+ retval = Jim_EvalObj(teap->interp, teap->body);
cmd_ctx->current_target_override = saved_target_override;
+
+ if (retval == ERROR_COMMAND_CLOSE_CONNECTION)
+ return;
+
+ if (retval == JIM_RETURN)
+ retval = teap->interp->returnCode;
+
+ if (retval != JIM_OK) {
+ Jim_MakeErrorMessage(teap->interp);
+ LOG_USER("Error executing event %s on target %s:\n%s",
+ Jim_Nvp_value2name_simple(nvp_target_event, e)->name,
+ target_name(target),
+ Jim_GetString(Jim_GetResult(teap->interp), NULL));
+ /* clean both error code and stacktrace before return */
+ Jim_Eval(teap->interp, "error \"\" \"\"");
+ }
}
}
}
TCFG_RTOS,
TCFG_DEFER_EXAMINE,
TCFG_GDB_PORT,
+ TCFG_GDB_MAX_CONNECTIONS,
};
static Jim_Nvp nvp_config_opts[] = {
{ .name = "-work-area-phys", .value = TCFG_WORK_AREA_PHYS },
{ .name = "-work-area-size", .value = TCFG_WORK_AREA_SIZE },
{ .name = "-work-area-backup", .value = TCFG_WORK_AREA_BACKUP },
- { .name = "-endian" , .value = TCFG_ENDIAN },
+ { .name = "-endian", .value = TCFG_ENDIAN },
{ .name = "-coreid", .value = TCFG_COREID },
{ .name = "-chain-position", .value = TCFG_CHAIN_POSITION },
{ .name = "-dbgbase", .value = TCFG_DBGBASE },
{ .name = "-rtos", .value = TCFG_RTOS },
{ .name = "-defer-examine", .value = TCFG_DEFER_EXAMINE },
{ .name = "-gdb-port", .value = TCFG_GDB_PORT },
+ { .name = "-gdb-max-connections", .value = TCFG_GDB_MAX_CONNECTIONS },
{ .name = NULL, .value = -1 }
};
}
switch (n->value) {
case TCFG_TYPE:
- /* not setable */
+ /* not settable */
if (goi->isconfigure) {
Jim_SetResultFormatted(goi->interp,
"not settable: %s", n->name);
if (goi->argc != 0)
goto no_params;
}
- Jim_SetResult(goi->interp, Jim_NewIntObj(goi->interp, target->working_area_size));
+ Jim_SetResult(goi->interp, Jim_NewIntObj(goi->interp, target->coreid));
/* loop for more */
break;
case TCFG_GDB_PORT:
if (goi->isconfigure) {
+ struct command_context *cmd_ctx = current_command_context(goi->interp);
+ if (cmd_ctx->mode != COMMAND_CONFIG) {
+ Jim_SetResultString(goi->interp, "-gdb-port must be configured before 'init'", -1);
+ return JIM_ERR;
+ }
+
const char *s;
e = Jim_GetOpt_String(goi, &s, NULL);
if (e != JIM_OK)
Jim_SetResultString(goi->interp, target->gdb_port_override ? : "undefined", -1);
/* loop for more */
break;
+
+ case TCFG_GDB_MAX_CONNECTIONS:
+ if (goi->isconfigure) {
+ struct command_context *cmd_ctx = current_command_context(goi->interp);
+ if (cmd_ctx->mode != COMMAND_CONFIG) {
+ Jim_SetResultString(goi->interp, "-gdb-max-conenctions must be configured before 'init'", -1);
+ return JIM_ERR;
+ }
+
+ e = Jim_GetOpt_Wide(goi, &w);
+ if (e != JIM_OK)
+ return e;
+ target->gdb_max_connections = (w < 0) ? CONNECTION_LIMIT_UNLIMITED : (int)w;
+ } else {
+ if (goi->argc != 0)
+ goto no_params;
+ }
+ Jim_SetResult(goi->interp, Jim_NewIntObj(goi->interp, target->gdb_max_connections));
+ break;
}
} /* while (goi->argc) */
return target_configure(&goi, target);
}
-static int jim_target_mw(Jim_Interp *interp, int argc, Jim_Obj *const *argv)
-{
- const char *cmd_name = Jim_GetString(argv[0], NULL);
-
- Jim_GetOptInfo goi;
- Jim_GetOpt_Setup(&goi, interp, argc - 1, argv + 1);
-
- if (goi.argc < 2 || goi.argc > 4) {
- Jim_SetResultFormatted(goi.interp,
- "usage: %s [phys] <address> <data> [<count>]", cmd_name);
- return JIM_ERR;
- }
-
- target_write_fn fn;
- fn = target_write_memory;
-
- int e;
- if (strcmp(Jim_GetString(argv[1], NULL), "phys") == 0) {
- /* consume it */
- struct Jim_Obj *obj;
- e = Jim_GetOpt_Obj(&goi, &obj);
- if (e != JIM_OK)
- return e;
-
- fn = target_write_phys_memory;
- }
-
- jim_wide a;
- e = Jim_GetOpt_Wide(&goi, &a);
- if (e != JIM_OK)
- return e;
-
- jim_wide b;
- e = Jim_GetOpt_Wide(&goi, &b);
- if (e != JIM_OK)
- return e;
-
- jim_wide c = 1;
- if (goi.argc == 1) {
- e = Jim_GetOpt_Wide(&goi, &c);
- if (e != JIM_OK)
- return e;
- }
-
- /* all args must be consumed */
- if (goi.argc != 0)
- return JIM_ERR;
-
- struct target *target = Jim_CmdPrivData(goi.interp);
- unsigned data_size;
- if (strcasecmp(cmd_name, "mww") == 0)
- data_size = 4;
- else if (strcasecmp(cmd_name, "mwh") == 0)
- data_size = 2;
- else if (strcasecmp(cmd_name, "mwb") == 0)
- data_size = 1;
- else {
- LOG_ERROR("command '%s' unknown: ", cmd_name);
- return JIM_ERR;
- }
-
- return (target_fill_mem(target, a, fn, data_size, b, c) == ERROR_OK) ? JIM_OK : JIM_ERR;
-}
-
-/**
-* @brief Reads an array of words/halfwords/bytes from target memory starting at specified address.
-*
-* Usage: mdw [phys] <address> [<count>] - for 32 bit reads
-* mdh [phys] <address> [<count>] - for 16 bit reads
-* mdb [phys] <address> [<count>] - for 8 bit reads
-*
-* Count defaults to 1.
-*
-* Calls target_read_memory or target_read_phys_memory depending on
-* the presence of the "phys" argument
-* Reads the target memory in blocks of max. 32 bytes, and returns an array of ints formatted
-* to int representation in base16.
-* Also outputs read data in a human readable form using command_print
-*
-* @param phys if present target_read_phys_memory will be used instead of target_read_memory
-* @param address address where to start the read. May be specified in decimal or hex using the standard "0x" prefix
-* @param count optional count parameter to read an array of values. If not specified, defaults to 1.
-* @returns: JIM_ERR on error or JIM_OK on success and sets the result string to an array of ascii formatted numbers
-* on success, with [<count>] number of elements.
-*
-* In case of little endian target:
-* Example1: "mdw 0x00000000" returns "10123456"
-* Exmaple2: "mdh 0x00000000 1" returns "3456"
-* Example3: "mdb 0x00000000" returns "56"
-* Example4: "mdh 0x00000000 2" returns "3456 1012"
-* Example5: "mdb 0x00000000 3" returns "56 34 12"
-**/
-static int jim_target_md(Jim_Interp *interp, int argc, Jim_Obj *const *argv)
-{
- const char *cmd_name = Jim_GetString(argv[0], NULL);
-
- Jim_GetOptInfo goi;
- Jim_GetOpt_Setup(&goi, interp, argc - 1, argv + 1);
-
- if ((goi.argc < 1) || (goi.argc > 3)) {
- Jim_SetResultFormatted(goi.interp,
- "usage: %s [phys] <address> [<count>]", cmd_name);
- return JIM_ERR;
- }
-
- int (*fn)(struct target *target,
- target_addr_t address, uint32_t size, uint32_t count, uint8_t *buffer);
- fn = target_read_memory;
-
- int e;
- if (strcmp(Jim_GetString(argv[1], NULL), "phys") == 0) {
- /* consume it */
- struct Jim_Obj *obj;
- e = Jim_GetOpt_Obj(&goi, &obj);
- if (e != JIM_OK)
- return e;
-
- fn = target_read_phys_memory;
- }
-
- /* Read address parameter */
- jim_wide addr;
- e = Jim_GetOpt_Wide(&goi, &addr);
- if (e != JIM_OK)
- return JIM_ERR;
-
- /* If next parameter exists, read it out as the count parameter, if not, set it to 1 (default) */
- jim_wide count;
- if (goi.argc == 1) {
- e = Jim_GetOpt_Wide(&goi, &count);
- if (e != JIM_OK)
- return JIM_ERR;
- } else
- count = 1;
-
- /* all args must be consumed */
- if (goi.argc != 0)
- return JIM_ERR;
-
- jim_wide dwidth = 1; /* shut up gcc */
- if (strcasecmp(cmd_name, "mdw") == 0)
- dwidth = 4;
- else if (strcasecmp(cmd_name, "mdh") == 0)
- dwidth = 2;
- else if (strcasecmp(cmd_name, "mdb") == 0)
- dwidth = 1;
- else {
- LOG_ERROR("command '%s' unknown: ", cmd_name);
- return JIM_ERR;
- }
-
- /* convert count to "bytes" */
- int bytes = count * dwidth;
-
- struct target *target = Jim_CmdPrivData(goi.interp);
- uint8_t target_buf[32];
- jim_wide x, y, z;
- while (bytes > 0) {
- y = (bytes < 16) ? bytes : 16; /* y = min(bytes, 16); */
-
- /* Try to read out next block */
- e = fn(target, addr, dwidth, y / dwidth, target_buf);
-
- if (e != ERROR_OK) {
- Jim_SetResultFormatted(interp, "error reading target @ 0x%08lx", (long)addr);
- return JIM_ERR;
- }
-
- command_print_sameline(NULL, "0x%08x ", (int)(addr));
- switch (dwidth) {
- case 4:
- for (x = 0; x < 16 && x < y; x += 4) {
- z = target_buffer_get_u32(target, &(target_buf[x]));
- command_print_sameline(NULL, "%08x ", (int)(z));
- }
- for (; (x < 16) ; x += 4)
- command_print_sameline(NULL, " ");
- break;
- case 2:
- for (x = 0; x < 16 && x < y; x += 2) {
- z = target_buffer_get_u16(target, &(target_buf[x]));
- command_print_sameline(NULL, "%04x ", (int)(z));
- }
- for (; (x < 16) ; x += 2)
- command_print_sameline(NULL, " ");
- break;
- case 1:
- default:
- for (x = 0 ; (x < 16) && (x < y) ; x += 1) {
- z = target_buffer_get_u8(target, &(target_buf[x]));
- command_print_sameline(NULL, "%02x ", (int)(z));
- }
- for (; (x < 16) ; x += 1)
- command_print_sameline(NULL, " ");
- break;
- }
- /* ascii-ify the bytes */
- for (x = 0 ; x < y ; x++) {
- if ((target_buf[x] >= 0x20) &&
- (target_buf[x] <= 0x7e)) {
- /* good */
- } else {
- /* smack it */
- target_buf[x] = '.';
- }
- }
- /* space pad */
- while (x < 16) {
- target_buf[x] = ' ';
- x++;
- }
- /* terminate */
- target_buf[16] = 0;
- /* print - with a newline */
- command_print_sameline(NULL, "%s\n", target_buf);
- /* NEXT... */
- bytes -= 16;
- addr += 16;
- }
- return JIM_OK;
-}
-
static int jim_target_mem2array(Jim_Interp *interp,
int argc, Jim_Obj *const *argv)
{
if (goi.argc > 0 &&
strcmp(Jim_GetString(argv[1], NULL), "allow-defer") == 0) {
/* consume it */
- struct Jim_Obj *obj;
+ Jim_Obj *obj;
int e = Jim_GetOpt_Obj(&goi, &obj);
if (e != JIM_OK)
return e;
"target: %s wait %s fails (%#s) %s",
target_name(target), n->name,
eObj, target_strerror_safe(e));
- Jim_FreeNewObj(interp, eObj);
return JIM_ERR;
}
return JIM_OK;
/* List for human, Events defined for this target.
* scripts/programs should use 'name cget -event NAME'
*/
-static int jim_target_event_list(Jim_Interp *interp, int argc, Jim_Obj *const *argv)
+COMMAND_HANDLER(handle_target_event_list)
{
- struct command_context *cmd_ctx = current_command_context(interp);
- assert(cmd_ctx != NULL);
-
- struct target *target = Jim_CmdPrivData(interp);
+ struct target *target = get_current_target(CMD_CTX);
struct target_event_action *teap = target->event_action;
- command_print(cmd_ctx, "Event actions for target (%d) %s\n",
+
+ command_print(CMD, "Event actions for target (%d) %s\n",
target->target_number,
target_name(target));
- command_print(cmd_ctx, "%-25s | Body", "Event");
- command_print(cmd_ctx, "------------------------- | "
+ command_print(CMD, "%-25s | Body", "Event");
+ command_print(CMD, "------------------------- | "
"----------------------------------------");
while (teap) {
Jim_Nvp *opt = Jim_Nvp_value2name_simple(nvp_target_event, teap->event);
- command_print(cmd_ctx, "%-25s | %s",
+ command_print(CMD, "%-25s | %s",
opt->name, Jim_GetString(teap->body, NULL));
teap = teap->next;
}
- command_print(cmd_ctx, "***END***");
- return JIM_OK;
+ command_print(CMD, "***END***");
+ return ERROR_OK;
}
static int jim_target_current_state(Jim_Interp *interp, int argc, Jim_Obj *const *argv)
{
static const struct command_registration target_instance_command_handlers[] = {
{
.name = "configure",
- .mode = COMMAND_CONFIG,
+ .mode = COMMAND_ANY,
.jim_handler = jim_target_configure,
.help = "configure a new target for use",
.usage = "[target_attribute ...]",
.help = "returns the specified target attribute",
.usage = "target_attribute",
},
+ {
+ .name = "mwd",
+ .handler = handle_mw_command,
+ .mode = COMMAND_EXEC,
+ .help = "Write 64-bit word(s) to target memory",
+ .usage = "address data [count]",
+ },
{
.name = "mww",
+ .handler = handle_mw_command,
.mode = COMMAND_EXEC,
- .jim_handler = jim_target_mw,
.help = "Write 32-bit word(s) to target memory",
.usage = "address data [count]",
},
{
.name = "mwh",
+ .handler = handle_mw_command,
.mode = COMMAND_EXEC,
- .jim_handler = jim_target_mw,
.help = "Write 16-bit half-word(s) to target memory",
.usage = "address data [count]",
},
{
.name = "mwb",
+ .handler = handle_mw_command,
.mode = COMMAND_EXEC,
- .jim_handler = jim_target_mw,
.help = "Write byte(s) to target memory",
.usage = "address data [count]",
},
+ {
+ .name = "mdd",
+ .handler = handle_md_command,
+ .mode = COMMAND_EXEC,
+ .help = "Display target memory as 64-bit words",
+ .usage = "address [count]",
+ },
{
.name = "mdw",
+ .handler = handle_md_command,
.mode = COMMAND_EXEC,
- .jim_handler = jim_target_md,
.help = "Display target memory as 32-bit words",
.usage = "address [count]",
},
{
.name = "mdh",
+ .handler = handle_md_command,
.mode = COMMAND_EXEC,
- .jim_handler = jim_target_md,
.help = "Display target memory as 16-bit half-words",
.usage = "address [count]",
},
{
.name = "mdb",
+ .handler = handle_md_command,
.mode = COMMAND_EXEC,
- .jim_handler = jim_target_md,
.help = "Display target memory as 8-bit bytes",
.usage = "address [count]",
},
},
{
.name = "eventlist",
+ .handler = handle_target_event_list,
.mode = COMMAND_EXEC,
- .jim_handler = jim_target_event_list,
.help = "displays a table of events defined for this target",
+ .usage = "",
},
{
.name = "curstate",
/* Create it */
target = calloc(1, sizeof(struct target));
+ if (!target) {
+ LOG_ERROR("Out of memory");
+ return JIM_ERR;
+ }
+
/* set target number */
target->target_number = new_target_number();
- cmd_ctx->current_target = target;
/* allocate memory for each unique target type */
- target->type = calloc(1, sizeof(struct target_type));
+ target->type = malloc(sizeof(struct target_type));
+ if (!target->type) {
+ LOG_ERROR("Out of memory");
+ free(target);
+ return JIM_ERR;
+ }
memcpy(target->type, target_types[x], sizeof(struct target_type));
/* initialize trace information */
target->trace_info = calloc(1, sizeof(struct trace));
+ if (!target->trace_info) {
+ LOG_ERROR("Out of memory");
+ free(target->type);
+ free(target);
+ return JIM_ERR;
+ }
target->dbgmsg = NULL;
target->dbg_msg_enabled = 0;
target->rtos_auto_detect = false;
target->gdb_port_override = NULL;
+ target->gdb_max_connections = 1;
/* Do the rest as "configure" options */
goi->isconfigure = 1;
}
if (e != JIM_OK) {
+ rtos_destroy(target);
free(target->gdb_port_override);
+ free(target->trace_info);
free(target->type);
free(target);
return e;
cp = Jim_GetString(new_cmd, NULL);
target->cmd_name = strdup(cp);
+ if (!target->cmd_name) {
+ LOG_ERROR("Out of memory");
+ rtos_destroy(target);
+ free(target->gdb_port_override);
+ free(target->trace_info);
+ free(target->type);
+ free(target);
+ return JIM_ERR;
+ }
if (target->type->target_create) {
e = (*(target->type->target_create))(target, goi->interp);
if (e != ERROR_OK) {
LOG_DEBUG("target_create failed");
+ free(target->cmd_name);
+ rtos_destroy(target);
free(target->gdb_port_override);
+ free(target->trace_info);
free(target->type);
- free(target->cmd_name);
free(target);
return JIM_ERR;
}
LOG_ERROR("unable to register '%s' commands", cp);
}
- /* append to end of list */
- {
- struct target **tpp;
- tpp = &(all_targets);
- while (*tpp)
- tpp = &((*tpp)->next);
- *tpp = target;
- }
-
/* now - create the new target name command */
const struct command_registration target_subcommands[] = {
{
COMMAND_REGISTRATION_DONE
};
e = register_commands(cmd_ctx, NULL, target_commands);
- if (ERROR_OK != e)
+ if (e != ERROR_OK) {
+ if (target->type->deinit_target)
+ target->type->deinit_target(target);
+ free(target->cmd_name);
+ rtos_destroy(target);
+ free(target->gdb_port_override);
+ free(target->trace_info);
+ free(target->type);
+ free(target);
return JIM_ERR;
+ }
struct command *c = command_find_in_context(cmd_ctx, cp);
assert(c);
command_set_handler_data(c, target);
- return (ERROR_OK == e) ? JIM_OK : JIM_ERR;
+ /* append to end of list */
+ append_to_list_all_targets(target);
+
+ cmd_ctx->current_target = target;
+ return JIM_OK;
}
static int jim_target_current(Jim_Interp *interp, int argc, Jim_Obj *const *argv)
struct command_context *cmd_ctx = current_command_context(interp);
assert(cmd_ctx != NULL);
- Jim_SetResultString(interp, target_name(get_current_target(cmd_ctx)), -1);
+ struct target *target = get_current_target_or_null(cmd_ctx);
+ if (target)
+ Jim_SetResultString(interp, target_name(target), -1);
return JIM_OK;
}
retval = 0;
LOG_DEBUG("%d", argc);
/* argv[1] = target to associate in smp
- * argv[2] = target to assoicate in smp
+ * argv[2] = target to associate in smp
* argv[3] ...
*/
.mode = COMMAND_CONFIG,
.handler = handle_target_init_command,
.help = "initialize targets",
+ .usage = "",
},
{
.name = "create",
static void free_fastload(void)
{
if (fastload != NULL) {
- int i;
- for (i = 0; i < fastload_num; i++) {
- if (fastload[i].data)
- free(fastload[i].data);
- }
+ for (int i = 0; i < fastload_num; i++)
+ free(fastload[i].data);
free(fastload);
fastload = NULL;
}
uint32_t image_size;
target_addr_t min_address = 0;
target_addr_t max_address = -1;
- int i;
struct image image;
fastload_num = image.num_sections;
fastload = malloc(sizeof(struct FastLoad)*image.num_sections);
if (fastload == NULL) {
- command_print(CMD_CTX, "out of memory");
+ command_print(CMD, "out of memory");
image_close(&image);
return ERROR_FAIL;
}
memset(fastload, 0, sizeof(struct FastLoad)*image.num_sections);
- for (i = 0; i < image.num_sections; i++) {
+ for (unsigned int i = 0; i < image.num_sections; i++) {
buffer = malloc(image.sections[i].size);
if (buffer == NULL) {
- command_print(CMD_CTX, "error allocating buffer for section (%d bytes)",
+ command_print(CMD, "error allocating buffer for section (%d bytes)",
(int)(image.sections[i].size));
retval = ERROR_FAIL;
break;
uint32_t offset = 0;
uint32_t length = buf_cnt;
- /* DANGER!!! beware of unsigned comparision here!!! */
+ /* DANGER!!! beware of unsigned comparison here!!! */
if ((image.sections[i].base_address + buf_cnt >= min_address) &&
(image.sections[i].base_address < max_address)) {
fastload[i].data = malloc(length);
if (fastload[i].data == NULL) {
free(buffer);
- command_print(CMD_CTX, "error allocating buffer for section (%" PRIu32 " bytes)",
+ command_print(CMD, "error allocating buffer for section (%" PRIu32 " bytes)",
length);
retval = ERROR_FAIL;
break;
fastload[i].length = length;
image_size += length;
- command_print(CMD_CTX, "%u bytes written at address 0x%8.8x",
+ command_print(CMD, "%u bytes written at address 0x%8.8x",
(unsigned int)length,
((unsigned int)(image.sections[i].base_address + offset)));
}
}
if ((ERROR_OK == retval) && (duration_measure(&bench) == ERROR_OK)) {
- command_print(CMD_CTX, "Loaded %" PRIu32 " bytes "
+ command_print(CMD, "Loaded %" PRIu32 " bytes "
"in %fs (%0.3f KiB/s)", image_size,
duration_elapsed(&bench), duration_kbps(&bench, image_size));
- command_print(CMD_CTX,
+ command_print(CMD,
"WARNING: image has not been loaded to target!"
"You can issue a 'fast_load' to finish loading.");
}
int retval = ERROR_OK;
for (i = 0; i < fastload_num; i++) {
struct target *target = get_current_target(CMD_CTX);
- command_print(CMD_CTX, "Write to 0x%08x, length 0x%08x",
+ command_print(CMD, "Write to 0x%08x, length 0x%08x",
(unsigned int)(fastload[i].address),
(unsigned int)(fastload[i].length));
retval = target_write_buffer(target, fastload[i].address, fastload[i].length, fastload[i].data);
}
if (retval == ERROR_OK) {
int64_t after = timeval_ms();
- command_print(CMD_CTX, "Loaded image %f kBytes/s", (float)(size/1024.0)/((float)(after-ms)/1000.0));
+ command_print(CMD, "Loaded image %f kBytes/s", (float)(size/1024.0)/((float)(after-ms)/1000.0));
}
return retval;
}
.name = "target",
.mode = COMMAND_CONFIG,
.help = "configure target",
-
.chain = target_subcommand_handlers,
+ .usage = "",
},
COMMAND_REGISTRATION_DONE
};
if ((target->rtos) && (target->rtos->type)
&& (target->rtos->type->ps_command)) {
display = target->rtos->type->ps_command(target);
- command_print(CMD_CTX, "%s", display);
+ command_print(CMD, "%s", display);
free(display);
return ERROR_OK;
} else {
}
}
-static void binprint(struct command_context *cmd_ctx, const char *text, const uint8_t *buf, int size)
+static void binprint(struct command_invocation *cmd, const char *text, const uint8_t *buf, int size)
{
if (text != NULL)
- command_print_sameline(cmd_ctx, "%s", text);
+ command_print_sameline(cmd, "%s", text);
for (int i = 0; i < size; i++)
- command_print_sameline(cmd_ctx, " %02x", buf[i]);
- command_print(cmd_ctx, " ");
+ command_print_sameline(cmd, " %02x", buf[i]);
+ command_print(cmd, " ");
}
COMMAND_HANDLER(handle_test_mem_access_command)
read_ref[i] = rand();
read_buf[i] = read_ref[i];
}
- command_print_sameline(CMD_CTX,
+ command_print_sameline(CMD,
"Test read %" PRIu32 " x %d @ %d to %saligned buffer: ", count,
size, offset, host_offset ? "un" : "");
duration_measure(&bench);
if (retval == ERROR_TARGET_UNALIGNED_ACCESS) {
- command_print(CMD_CTX, "Unsupported alignment");
+ command_print(CMD, "Unsupported alignment");
goto next;
} else if (retval != ERROR_OK) {
- command_print(CMD_CTX, "Memory read failed");
+ command_print(CMD, "Memory read failed");
goto next;
}
/* check result */
int result = memcmp(read_ref, read_buf, host_bufsiz);
if (result == 0) {
- command_print(CMD_CTX, "Pass in %fs (%0.3f KiB/s)",
+ command_print(CMD, "Pass in %fs (%0.3f KiB/s)",
duration_elapsed(&bench),
duration_kbps(&bench, count * size));
} else {
- command_print(CMD_CTX, "Compare failed");
- binprint(CMD_CTX, "ref:", read_ref, host_bufsiz);
- binprint(CMD_CTX, "buf:", read_buf, host_bufsiz);
+ command_print(CMD, "Compare failed");
+ binprint(CMD, "ref:", read_ref, host_bufsiz);
+ binprint(CMD, "buf:", read_buf, host_bufsiz);
}
next:
free(read_ref);
for (size_t i = 0; i < host_bufsiz; i++)
write_buf[i] = rand();
- command_print_sameline(CMD_CTX,
+ command_print_sameline(CMD,
"Test write %" PRIu32 " x %d @ %d from %saligned buffer: ", count,
size, offset, host_offset ? "un" : "");
retval = target_write_memory(target, wa->address, 1, num_bytes, test_pattern);
if (retval != ERROR_OK) {
- command_print(CMD_CTX, "Test pattern write failed");
+ command_print(CMD, "Test pattern write failed");
goto nextw;
}
duration_measure(&bench);
if (retval == ERROR_TARGET_UNALIGNED_ACCESS) {
- command_print(CMD_CTX, "Unsupported alignment");
+ command_print(CMD, "Unsupported alignment");
goto nextw;
} else if (retval != ERROR_OK) {
- command_print(CMD_CTX, "Memory write failed");
+ command_print(CMD, "Memory write failed");
goto nextw;
}
/* read back */
retval = target_read_memory(target, wa->address, 1, num_bytes, read_buf);
if (retval != ERROR_OK) {
- command_print(CMD_CTX, "Test pattern write failed");
+ command_print(CMD, "Test pattern write failed");
goto nextw;
}
/* check result */
int result = memcmp(read_ref, read_buf, num_bytes);
if (result == 0) {
- command_print(CMD_CTX, "Pass in %fs (%0.3f KiB/s)",
+ command_print(CMD, "Pass in %fs (%0.3f KiB/s)",
duration_elapsed(&bench),
duration_kbps(&bench, count * size));
} else {
- command_print(CMD_CTX, "Compare failed");
- binprint(CMD_CTX, "ref:", read_ref, num_bytes);
- binprint(CMD_CTX, "buf:", read_buf, num_bytes);
+ command_print(CMD, "Compare failed");
+ binprint(CMD, "ref:", read_ref, num_bytes);
+ binprint(CMD, "buf:", read_buf, num_bytes);
}
nextw:
free(read_ref);
.name = "halt",
.handler = handle_halt_command,
.mode = COMMAND_EXEC,
- .help = "request target to halt, then wait up to the specified"
+ .help = "request target to halt, then wait up to the specified "
"number of milliseconds (default 5000) for it to complete",
.usage = "[milliseconds]",
},
.handler = handle_reset_command,
.mode = COMMAND_EXEC,
.usage = "[run|halt|init]",
- .help = "Reset all targets into the specified mode."
+ .help = "Reset all targets into the specified mode. "
"Default reset mode is run, if not given.",
},
{
.name = "mdd",
.handler = handle_md_command,
.mode = COMMAND_EXEC,
- .help = "display memory words",
+ .help = "display memory double-words",
.usage = "['phys'] address [count]",
},
{
.name = "mwd",
.handler = handle_mw_command,
.mode = COMMAND_EXEC,
- .help = "write memory word",
+ .help = "write memory double-word",
.usage = "['phys'] address value [count]",
},
{
.handler = handle_bp_command,
.mode = COMMAND_EXEC,
.help = "list or set hardware or software breakpoint",
- .usage = "<address> [<asid>] <length> ['hw'|'hw_ctx']",
+ .usage = "[<address> [<asid>] <length> ['hw'|'hw_ctx']]",
},
{
.name = "rbp",
.handler = handle_rbp_command,
.mode = COMMAND_EXEC,
.help = "remove breakpoint",
- .usage = "address",
+ .usage = "'all' | address",
},
{
.name = "wp",