* programming. The exact delay shouldn't matter as long as it's
* less than buffer size / flash speed. This is very unlikely to
* run when using high latency connections such as USB. */
- alive_sleep(10);
+ alive_sleep(2);
/* to stop an infinite loop on some targets check and increment a timeout
* this issue was observed on a stellaris using the new ICDI interface */
- if (timeout++ >= 500) {
+ if (timeout++ >= 2500) {
LOG_ERROR("timeout waiting for algorithm, a target reset is recommended");
return ERROR_FLASH_OPERATION_FAILED;
}
if (thisrun_bytes > count * block_size)
thisrun_bytes = count * block_size;
+ /* Force end of large blocks to be word aligned */
+ if (thisrun_bytes >= 16)
+ thisrun_bytes -= (rp + thisrun_bytes) & 0x03;
+
/* Write data to fifo */
retval = target_write_buffer(target, wp, thisrun_bytes, buffer);
if (retval != ERROR_OK)
return retval;
}
+int target_run_read_async_algorithm(struct target *target,
+ uint8_t *buffer, uint32_t count, int block_size,
+ int num_mem_params, struct mem_param *mem_params,
+ int num_reg_params, struct reg_param *reg_params,
+ uint32_t buffer_start, uint32_t buffer_size,
+ uint32_t entry_point, uint32_t exit_point, void *arch_info)
+{
+ int retval;
+ int timeout = 0;
+
+ const uint8_t *buffer_orig = buffer;
+
+ /* Set up working area. First word is write pointer, second word is read pointer,
+ * rest is fifo data area. */
+ uint32_t wp_addr = buffer_start;
+ uint32_t rp_addr = buffer_start + 4;
+ uint32_t fifo_start_addr = buffer_start + 8;
+ uint32_t fifo_end_addr = buffer_start + buffer_size;
+
+ uint32_t wp = fifo_start_addr;
+ uint32_t rp = fifo_start_addr;
+
+ /* validate block_size is 2^n */
+ assert(!block_size || !(block_size & (block_size - 1)));
+
+ retval = target_write_u32(target, wp_addr, wp);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = target_write_u32(target, rp_addr, rp);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* Start up algorithm on target */
+ retval = target_start_algorithm(target, num_mem_params, mem_params,
+ num_reg_params, reg_params,
+ entry_point,
+ exit_point,
+ arch_info);
+
+ if (retval != ERROR_OK) {
+ LOG_ERROR("error starting target flash read algorithm");
+ return retval;
+ }
+
+ while (count > 0) {
+ retval = target_read_u32(target, wp_addr, &wp);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("failed to get write pointer");
+ break;
+ }
+
+ LOG_DEBUG("offs 0x%zx count 0x%" PRIx32 " wp 0x%" PRIx32 " rp 0x%" PRIx32,
+ (size_t) (buffer - buffer_orig), count, wp, rp);
+
+ if (wp == 0) {
+ LOG_ERROR("flash read algorithm aborted by target");
+ retval = ERROR_FLASH_OPERATION_FAILED;
+ break;
+ }
+
+ if (((wp - fifo_start_addr) & (block_size - 1)) || wp < fifo_start_addr || wp >= fifo_end_addr) {
+ LOG_ERROR("corrupted fifo write pointer 0x%" PRIx32, wp);
+ break;
+ }
+
+ /* Count the number of bytes available in the fifo without
+ * crossing the wrap around. */
+ uint32_t thisrun_bytes;
+ if (wp >= rp)
+ thisrun_bytes = wp - rp;
+ else
+ thisrun_bytes = fifo_end_addr - rp;
+
+ if (thisrun_bytes == 0) {
+ /* Throttle polling a bit if transfer is (much) faster than flash
+ * reading. The exact delay shouldn't matter as long as it's
+ * less than buffer size / flash speed. This is very unlikely to
+ * run when using high latency connections such as USB. */
+ alive_sleep(2);
+
+ /* to stop an infinite loop on some targets check and increment a timeout
+ * this issue was observed on a stellaris using the new ICDI interface */
+ if (timeout++ >= 2500) {
+ LOG_ERROR("timeout waiting for algorithm, a target reset is recommended");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+ continue;
+ }
+
+ /* Reset our timeout */
+ timeout = 0;
+
+ /* Limit to the amount of data we actually want to read */
+ if (thisrun_bytes > count * block_size)
+ thisrun_bytes = count * block_size;
+
+ /* Force end of large blocks to be word aligned */
+ if (thisrun_bytes >= 16)
+ thisrun_bytes -= (rp + thisrun_bytes) & 0x03;
+
+ /* Read data from fifo */
+ retval = target_read_buffer(target, rp, thisrun_bytes, buffer);
+ if (retval != ERROR_OK)
+ break;
+
+ /* Update counters and wrap write pointer */
+ buffer += thisrun_bytes;
+ count -= thisrun_bytes / block_size;
+ rp += thisrun_bytes;
+ if (rp >= fifo_end_addr)
+ rp = fifo_start_addr;
+
+ /* Store updated write pointer to target */
+ retval = target_write_u32(target, rp_addr, rp);
+ if (retval != ERROR_OK)
+ break;
+
+ /* Avoid GDB timeouts */
+ keep_alive();
+
+ }
+
+ if (retval != ERROR_OK) {
+ /* abort flash write algorithm on target */
+ target_write_u32(target, rp_addr, 0);
+ }
+
+ int retval2 = target_wait_algorithm(target, num_mem_params, mem_params,
+ num_reg_params, reg_params,
+ exit_point,
+ 10000,
+ arch_info);
+
+ if (retval2 != ERROR_OK) {
+ LOG_ERROR("error waiting for target flash write algorithm");
+ retval = retval2;
+ }
+
+ if (retval == ERROR_OK) {
+ /* check if algorithm set wp = 0 after fifo writer loop finished */
+ retval = target_read_u32(target, wp_addr, &wp);
+ if (retval == ERROR_OK && wp == 0) {
+ LOG_ERROR("flash read algorithm aborted by target");
+ retval = ERROR_FLASH_OPERATION_FAILED;
+ }
+ }
+
+ return retval;
+}
+
int target_read_memory(struct target *target,
target_addr_t address, uint32_t size, uint32_t count, uint8_t *buffer)
{
projects / fw / openocd / blobdiff