jtag newtap change & huge manual update

[fw/openocd] / src / target / target / str9comstick.cfg

diff --git a/src/target/target/str9comstick.cfg b/src/target/target/str9comstick.cfg
index b601a6534b1082a3ed0ad505b2c668e29d1a4a91..0696c1213c00c3195569bb140e2c52a01f2115a6 100644 (file)
--- a/src/target/target/str9comstick.cfg
+++ b/src/target/target/str9comstick.cfg
@@ -5,15 +5,38 @@ jtag_khz 3000
 
 jtag_nsrst_delay 100
 jtag_ntrst_delay 100
-#use combined on interfaces or targets that can\92t set TRST/SRST separately
+#use combined on interfaces or targets that can't set TRST/SRST separately
 reset_config trst_and_srst
 #jtag scan chain
 #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 8 0x1 0x1 0xfe
-jtag_device 4 0x1 0xf 0xe
-jtag_device 5 0x1 0x1 0x1e
-target arm966e little 1 arm966e
-run_and_halt_time 0 30
-working_area 0 0x50000000 16384 nobackup
+
+
+if { [info exists FLASHTAPID ] } {
+   set _FLASHTAPID $FLASHTAPID
+} else {
+   set _FLASHTAPID 0xFFFFFFFF
+}
+jtag newtap $_CHIPNAME flash -irlen 8 -ircapture 0x1 -irmask 0x1 -expected-id $_FLASHTAPID
+
+if { [info exists CPUTAPID ] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+   set _CPUTAPID 0x25966041
+}
+jtag newtap $_CHIPNAME cpu   -irlen 4 -ircapture 0xf -irmask 0xe -expected-id $_CPUTAPID
+
+
+if { [info exists BSTAPID ] } {
+   set _BSTAPID $BSTAPID
+} else {
+   set _BSTAPID 0xFFFFFFFF
+}
+jtag newtap $_CHIPNAME bs    -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID
+
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e
+
+$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0
+
 #flash bank <driver> <base> <size> <chip_width> <bus_width>
 flash bank str9x 0x00000000 0x00080000 0 0 0