remove in_handler usage

[fw/openocd] / src / target / target / pic32mx.cfg

diff --git a/src/target/target/pic32mx.cfg b/src/target/target/pic32mx.cfg
index 25ef0294cbd5300e82ed96c28b56a2a593dc70c7..139f801f78b16397e253d87b8cc76ad67316925e 100644 (file)
--- a/src/target/target/pic32mx.cfg
+++ b/src/target/target/pic32mx.cfg
@@ -1,3 +1,23 @@
+
+if { [info exists CHIPNAME] } {        
+   set  _CHIPNAME $CHIPNAME    
+} else {        
+   set  _CHIPNAME pic32mx
+}
+
+if { [info exists ENDIAN] } {  
+   set  _ENDIAN $ENDIAN    
+} else {        
+   set  _ENDIAN little
+}
+
+if { [info exists CPUTAPID ] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+  # force an error till we get a good number
+   set _CPUTAPID 0x30938053
+}
+
 jtag_nsrst_delay 100
 jtag_ntrst_delay 100
 
@@ -6,17 +26,15 @@ reset_config srst_only
 
 #jtag scan chain
 #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 5 0x1 0x1 0x1e
+jtag newtap $_CHIPNAME cpu -irlen 5  -ircapture 0x1 -irmask 0x1f -expected-id $_CPUTAPID
 
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target mips_m4k little 0
-run_and_halt_time 0 30
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME mips_m4k -endian $_ENDIAN -chain-position $_TARGETNAME
 
-working_area 0 0xa0000000 16384 nobackup
+$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0xa0000000 -work-area-size 16384 -work-area-backup 0
 
-#flash bank str7x <base> <size> 0 0 <target#> <variant>
-#flash bank stm32x 0 0 0 0 0
+flash bank pic32mx 0xbd000000 0 0 0 0
+flash bank pic32mx 0xbfc00000 0 0 0 0
 
 # For more information about the configuration files, take a look at:
-# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
+# openocd.texi