add missing reset script

[fw/openocd] / src / target / target / lpc2148.cfg

diff --git a/src/target/target/lpc2148.cfg b/src/target/target/lpc2148.cfg
index c357662fd798fd39638c096873dd98d3f0fa87ec..32ccebaf8df5ca474b81e0d74bdb35d8a67e1541 100644 (file)
--- a/src/target/target/lpc2148.cfg
+++ b/src/target/target/lpc2148.cfg
@@ -5,19 +5,25 @@ jtag_ntrst_delay 200
 #use combined on interfaces or targets that can't set TRST/SRST separately
 reset_config trst_and_srst srst_pulls_trst
 
+#LPCs need reset pulled while RTCK is low. 0 to activate JTAG, power-on reset is not enough
+jtag_reset 1 1
+jtag_reset 0 0
+
 #jtag scan chain
 #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
 jtag_device 4 0x1 0xf 0xe
 
 #target <type> <startup mode>
 #target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4
+target arm7tdmi little run_and_init 0 arm7tdmi-s_r4
 run_and_halt_time 0 30
 
+target_script 0 reset event/lpc2148_reset.script
+
 working_area 0 0x40000000 0x4000 nobackup
 
 #flash bank lpc2000 <base> <size> 0 0 <target#> <variant>
-flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765 calc_checksum
+flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765
 
 # For more information about the configuration files, take a look at:
 # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger