Add warning to generated Doxyfile to edit Doxyfile.in.
[fw/openocd] / src / target / target / lpc2129.cfg
index 908b2512c3429701db724e394c3e39a7637f6cc7..b224c044321e3b81d41fe340985f74462eeefd4a 100644 (file)
@@ -1,15 +1,41 @@
-#LPC-2129 CPU\r
-#use combined on interfaces or targets that can\92t set TRST/SRST separately\r
-reset_config trst_and_srst srst_pulls_trst\r
-#jtag scan chain\r
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)\r
-jtag_device 4 0x1 0xf 0xe\r
-#target configuration\r
-daemon_startup reset\r
-#target <type> <startup mode>\r
-#target arm7tdmi <endianness> <reset mode> <chainpos> <variant>\r
-target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4\r
-run_and_halt_time 0 30\r
-working_area 0 0x40000000 0x4000 nobackup\r
-#flash bank <driver> <base> <size> <chip_width> <bus_width>\r
-flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14765 calc_checksum\r
+#LPC-2129 CPU
+
+
+if { [info exists CHIPNAME] } {        
+   set  _CHIPNAME $CHIPNAME    
+} else {        
+   set  _CHIPNAME lpc2129
+}
+
+if { [info exists ENDIAN] } {  
+   set  _ENDIAN $ENDIAN    
+} else {        
+   set  _ENDIAN little
+}
+
+if { [info exists CPUTAPID ] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+  # force an error till we get a good number
+   set _CPUTAPID 0xffffffff
+}
+
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config trst_and_srst srst_pulls_trst
+
+# reset delays
+jtag_nsrst_delay 100
+jtag_ntrst_delay 100
+
+#jtag scan chain
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+
+
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
+
+$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
+
+#flash bank <driver> <base> <size> <chip_width> <bus_width>
+flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14765 calc_checksum