+# SPDX-License-Identifier: GPL-2.0-or-later
+
# Defines basic Tcl procs for OpenOCD target module
proc new_target_name { } {
- return [target number [expr [target count] - 1 ]]
+ return [target number [expr {[target count] - 1}]]
}
global in_process_reset
}
set in_process_reset 1
- set success [expr [catch {ocd_process_reset_inner $MODE} result]==0]
+ set success [expr {[catch {ocd_process_reset_inner $MODE} result] == 0}]
set in_process_reset 0
if {$success} {
set targets [target names]
# If this target must be halted...
- set halt -1
- if { 0 == [string compare $MODE halt] } {
- set halt 1
- }
- if { 0 == [string compare $MODE init] } {
- set halt 1;
- }
- if { 0 == [string compare $MODE run ] } {
- set halt 0;
- }
- if { $halt < 0 } {
- return -code error "Invalid mode: $MODE, must be one of: halt, init, or run";
+ switch $MODE {
+ halt -
+ init {
+ set halt 1
+ }
+ run {
+ set halt 0
+ }
+ default {
+ return -code error "Invalid mode: $MODE, must be one of: halt, init, or run";
+ }
}
# Target event handlers *might* change which TAPs are enabled
continue
}
- # Wait upto 1 second for target to halt. Why 1sec? Cause
+ # Wait up to 1 second for target to halt. Why 1sec? Cause
# the JTAG tap reset signal might be hooked to a slow
# resistor/capacitor circuit - and it might take a while
# to charge
# Did we succeed?
set s [$t curstate]
- if { 0 != [string compare $s "halted" ] } {
+ if { $s != "halted" } {
return -code error [format "TARGET: %s - Not halted" $t]
}
}
}
#Pass 2 - if needed "init"
- if { 0 == [string compare init $MODE] } {
+ if { $MODE == "init" } {
foreach t $targets {
if {[using_jtag] && ![jtag tapisenabled [$t cget -chain-position]]} {
continue
#########
-# Temporary migration aid. May be removed starting in January 2011.
-proc armv4_5 params {
- echo "DEPRECATED! use 'arm $params' not 'armv4_5 $params'"
- arm $params
-}
-
# Target/chain configuration scripts can either execute commands directly
# or define a procedure which is executed once all configuration
# scripts have completed.
foreach t $targets {
set_default_target_event $t gdb-flash-erase-start "reset init"
set_default_target_event $t gdb-flash-write-end "reset halt"
- set_default_target_event $t gdb-attach "halt"
+ set_default_target_event $t gdb-attach "halt 1000"
}
}
proc init_board {} {
}
-# deprecated target name cmds
-proc cortex_m3 args {
- echo "DEPRECATED! use 'cortex_m' not 'cortex_m3'"
- eval cortex_m $args
+proc mem2array {arrayname bitwidth address count {phys ""}} {
+ echo "DEPRECATED! use 'read_memory' not 'mem2array'"
+
+ upvar $arrayname $arrayname
+ set $arrayname ""
+ set i 0
+
+ foreach elem [read_memory $address $bitwidth $count {*}$phys] {
+ set ${arrayname}($i) $elem
+ incr i
+ }
+}
+
+proc array2mem {arrayname bitwidth address count {phys ""}} {
+ echo "DEPRECATED! use 'write_memory' not 'array2mem'"
+
+ upvar $arrayname $arrayname
+ set data ""
+
+ for {set i 0} {$i < $count} {incr i} {
+ lappend data [expr $${arrayname}($i)]
+ }
+
+ write_memory $address $bitwidth $data {*}$phys
+}
+
+# smp_on/smp_off were already DEPRECATED in v0.11.0 through http://openocd.zylin.com/4615
+lappend _telnet_autocomplete_skip "aarch64 smp_on"
+proc "aarch64 smp_on" {args} {
+ echo "DEPRECATED! use 'aarch64 smp on' not 'aarch64 smp_on'"
+ eval aarch64 smp on $args
+}
+
+lappend _telnet_autocomplete_skip "aarch64 smp_off"
+proc "aarch64 smp_off" {args} {
+ echo "DEPRECATED! use 'aarch64 smp off' not 'aarch64 smp_off'"
+ eval aarch64 smp off $args
+}
+
+lappend _telnet_autocomplete_skip "cortex_a smp_on"
+proc "cortex_a smp_on" {args} {
+ echo "DEPRECATED! use 'cortex_a smp on' not 'cortex_a smp_on'"
+ eval cortex_a smp on $args
+}
+
+lappend _telnet_autocomplete_skip "cortex_a smp_off"
+proc "cortex_a smp_off" {args} {
+ echo "DEPRECATED! use 'cortex_a smp off' not 'cortex_a smp_off'"
+ eval cortex_a smp off $args
+}
+
+lappend _telnet_autocomplete_skip "mips_m4k smp_on"
+proc "mips_m4k smp_on" {args} {
+ echo "DEPRECATED! use 'mips_m4k smp on' not 'mips_m4k smp_on'"
+ eval mips_m4k smp on $args
}
-proc cortex_a8 args {
- echo "DEPRECATED! use 'cortex_a' not 'cortex_a8'"
- eval cortex_a $args
+lappend _telnet_autocomplete_skip "mips_m4k smp_off"
+proc "mips_m4k smp_off" {args} {
+ echo "DEPRECATED! use 'mips_m4k smp off' not 'mips_m4k smp_off'"
+ eval mips_m4k smp off $args
}