-/* SPDX-License-Identifier: GPL-2.0-or-later */
+// SPDX-License-Identifier: GPL-2.0-or-later
/***************************************************************************
* Copyright (C) 2018 by Liviu Ionescu *
* *
* Copyright (C) 2016 by Square, Inc. *
* Steven Stallion <stallion@squareup.com> *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program. If not, see <http://www.gnu.org/licenses/>. *
***************************************************************************/
/**
#include "config.h"
#endif
-#include "log.h"
+#include <helper/log.h>
#include "target/target.h"
-#include "target/semihosting_common.h"
#include "riscv.h"
static int riscv_semihosting_setup(struct target *target, int enable);
* @param retval Pointer to a location where the return code will be stored
* @return non-zero value if a request was processed or an error encountered
*/
-semihosting_result_t riscv_semihosting(struct target *target, int *retval)
+enum semihosting_result riscv_semihosting(struct target *target, int *retval)
{
struct semihosting *semihosting = target->semihosting;
if (!semihosting) {
LOG_DEBUG(" -> NONE (!semihosting)");
- return SEMI_NONE;
+ return SEMIHOSTING_NONE;
}
if (!semihosting->is_active) {
LOG_DEBUG(" -> NONE (!semihosting->is_active)");
- return SEMI_NONE;
+ return SEMIHOSTING_NONE;
}
riscv_reg_t pc;
int result = riscv_get_register(target, &pc, GDB_REGNO_PC);
if (result != ERROR_OK)
- return SEMI_ERROR;
+ return SEMIHOSTING_ERROR;
- uint8_t tmp[12];
+ uint8_t tmp_buf[12];
- /* Read the current instruction, including the bracketing */
- *retval = target_read_memory(target, pc - 4, 2, 6, tmp);
- if (*retval != ERROR_OK)
- return SEMI_ERROR;
+ /* Read three uncompressed instructions: The previous, the current one (pointed to by PC) and the next one */
+ for (int i = 0; i < 3; i++) {
+ /* Instruction memories may not support arbitrary read size. Use any size that will work. */
+ *retval = riscv_read_by_any_size(target, (pc - 4) + 4 * i, 4, tmp_buf + 4 * i);
+ if (*retval != ERROR_OK)
+ return SEMIHOSTING_ERROR;
+ }
/*
* The instructions that trigger a semihosting call,
* 00100073 ebreak
* 40705013 srai zero,zero,0x7
*/
- uint32_t pre = target_buffer_get_u32(target, tmp);
- uint32_t ebreak = target_buffer_get_u32(target, tmp + 4);
- uint32_t post = target_buffer_get_u32(target, tmp + 8);
+ uint32_t pre = target_buffer_get_u32(target, tmp_buf);
+ uint32_t ebreak = target_buffer_get_u32(target, tmp_buf + 4);
+ uint32_t post = target_buffer_get_u32(target, tmp_buf + 8);
LOG_DEBUG("check %08x %08x %08x from 0x%" PRIx64 "-4", pre, ebreak, post, pc);
if (pre != 0x01f01013 || ebreak != 0x00100073 || post != 0x40705013) {
/* Not the magic sequence defining semihosting. */
LOG_DEBUG(" -> NONE (no magic)");
- return SEMI_NONE;
+ return SEMIHOSTING_NONE;
}
/*
result = riscv_get_register(target, &r0, GDB_REGNO_A0);
if (result != ERROR_OK) {
LOG_DEBUG(" -> ERROR (couldn't read a0)");
- return SEMI_ERROR;
+ return SEMIHOSTING_ERROR;
}
result = riscv_get_register(target, &r1, GDB_REGNO_A1);
if (result != ERROR_OK) {
LOG_DEBUG(" -> ERROR (couldn't read a1)");
- return SEMI_ERROR;
+ return SEMIHOSTING_ERROR;
}
semihosting->op = r0;
semihosting->word_size_bytes = riscv_xlen(target) / 8;
/* Check for ARM operation numbers. */
- if (0 <= semihosting->op && semihosting->op <= 0x31) {
+ if ((semihosting->op >= 0 && semihosting->op <= 0x31) ||
+ (semihosting->op >= 0x100 && semihosting->op <= 0x107)) {
+
*retval = semihosting_common(target);
if (*retval != ERROR_OK) {
- LOG_ERROR("Failed semihosting operation");
- return SEMI_ERROR;
+ LOG_ERROR("Failed semihosting operation (0x%02X)", semihosting->op);
+ return SEMIHOSTING_ERROR;
}
} else {
/* Unknown operation number, not a semihosting call. */
LOG_DEBUG(" -> NONE (unknown operation number)");
- return SEMI_NONE;
+ return SEMIHOSTING_NONE;
}
}
/* Resume right after the EBREAK 4 bytes instruction. */
*retval = riscv_set_register(target, GDB_REGNO_PC, pc + 4);
if (*retval != ERROR_OK)
- return SEMI_ERROR;
+ return SEMIHOSTING_ERROR;
LOG_DEBUG(" -> HANDLED");
- return SEMI_HANDLED;
+ return SEMIHOSTING_HANDLED;
}
LOG_DEBUG(" -> WAITING");
- return SEMI_WAITING;
+ return SEMIHOSTING_WAITING;
}
/* -------------------------------------------------------------------------
projects / fw / openocd / blobdiff