/* enable breakpoint (physical address) */
aice_write_debug_reg(aice, NDS_EDM_SR_BPC0 + hbr_index, 0xA);
- LOG_DEBUG("Add hardware BP %d at %08" PRIx32, hbr_index,
+ LOG_DEBUG("Add hardware BP %" PRId32 " at %08" PRIx32, hbr_index,
bp->address);
hbr_index++;
else
return ERROR_FAIL;
- LOG_DEBUG("Remove hardware BP %d at %08" PRIx32, hbr_index,
+ LOG_DEBUG("Remove hardware BP %" PRId32 " at %08" PRIx32, hbr_index,
bp->address);
hbr_index++;
/* set value */
aice_write_debug_reg(aice, NDS_EDM_SR_BPV0 + wp_num, 0);
- LOG_DEBUG("Add hardware wathcpoint %d at %08" PRIx32 " mask %08" PRIx32, wp_num,
+ LOG_DEBUG("Add hardware wathcpoint %" PRId32 " at %08" PRIx32 " mask %08" PRIx32, wp_num,
wp->address, wp->mask);
}
/* disable watchpoint */
aice_write_debug_reg(aice, NDS_EDM_SR_BPC0 + wp_num, 0x0);
- LOG_DEBUG("Remove hardware wathcpoint %d at %08" PRIx32 " mask %08" PRIx32,
+ LOG_DEBUG("Remove hardware wathcpoint %" PRId32 " at %08" PRIx32 " mask %08" PRIx32,
wp_num, wp->address, wp->mask);
}
nds32->current_interrupt_level = (val_ir0 >> 1) & 0x3;
if (nds32_reach_max_interrupt_level(nds32)) {
- LOG_ERROR("<-- TARGET ERROR! Reaching the max interrupt stack level %d. -->",
+ LOG_ERROR("<-- TARGET ERROR! Reaching the max interrupt stack level %" PRIu32 ". -->",
nds32->current_interrupt_level);
/* decrease interrupt level */
return ERROR_OK;
}
-
/* There is a case that single step also trigger another interrupt,
then HSS bit in psw(ir0) will push to ipsw(ir1).
Then hit debug interrupt HSS bit in ipsw(ir1) will push to (p_ipsw)ir2
{
LOG_DEBUG("nds32_v2_debug_entry");
- jtag_poll_set_enabled(false);
-
if (nds32->virtual_hosting)
LOG_WARNING("<-- TARGET WARNING! Virtual hosting is not supported "
"under V1/V2 architecture. -->");
- struct nds32_v2_common *nds32_v2 = target_to_nds32_v2(nds32->target);
-
- CHECK_RETVAL(nds32_v2_deactivate_hardware_breakpoint(nds32->target));
-
- if (enable_watchpoint)
- CHECK_RETVAL(nds32_v2_deactivate_hardware_watchpoint(nds32->target));
-
+ enum target_state backup_state = nds32->target->state;
nds32->target->state = TARGET_HALTED;
- nds32_examine_debug_reason(nds32);
if (nds32->init_arch_info_after_halted == false) {
/* init architecture info according to config registers */
/* REVISIT entire cache should already be invalid !!! */
register_cache_invalidate(nds32->core_cache);
+ /* deactivate all hardware breakpoints */
+ CHECK_RETVAL(nds32_v2_deactivate_hardware_breakpoint(nds32->target));
+
+ if (enable_watchpoint)
+ CHECK_RETVAL(nds32_v2_deactivate_hardware_watchpoint(nds32->target));
+
+ if (ERROR_OK != nds32_examine_debug_reason(nds32)) {
+ nds32->target->state = backup_state;
+
+ /* re-activate all hardware breakpoints & watchpoints */
+ CHECK_RETVAL(nds32_v2_activate_hardware_breakpoint(nds32->target));
+
+ if (enable_watchpoint) {
+ /* activate all watchpoints */
+ CHECK_RETVAL(nds32_v2_activate_hardware_watchpoint(nds32->target));
+ }
+
+ return ERROR_FAIL;
+ }
+
/* check interrupt level before .full_context(), because
- * get_mapped_reg needs current_interrupt_level information */
+ * get_mapped_reg() in nds32_full_context() needs current_interrupt_level
+ * information */
+ struct nds32_v2_common *nds32_v2 = target_to_nds32_v2(nds32->target);
nds32_v2_check_interrupt_stack(nds32_v2);
/* Save registers. */
*/
static int nds32_v2_leave_debug_state(struct nds32 *nds32, bool enable_watchpoint)
{
- struct nds32_v2_common *nds32_v2 = target_to_nds32_v2(nds32->target);
+ LOG_DEBUG("nds32_v2_leave_debug_state");
+
+ struct target *target = nds32->target;
/* activate all hardware breakpoints */
CHECK_RETVAL(nds32_v2_activate_hardware_breakpoint(nds32->target));
}
/* restore interrupt stack */
+ struct nds32_v2_common *nds32_v2 = target_to_nds32_v2(nds32->target);
nds32_v2_restore_interrupt_stack(nds32_v2);
/* restore PSW, PC, and R0 ... after flushing any modified
* registers.
*/
- CHECK_RETVAL(nds32_restore_context(nds32->target));
+ CHECK_RETVAL(nds32_restore_context(target));
register_cache_invalidate(nds32->core_cache);
- jtag_poll_set_enabled(true);
-
- return ERROR_OK;
-}
-
-static int nds32_v2_soft_reset_halt(struct target *target)
-{
- /* TODO: test it */
- struct nds32 *nds32 = target_to_nds32(target);
- struct aice_port_s *aice = target_to_aice(target);
-
- aice_assert_srst(aice, AICE_SRST);
-
- /* halt core and set pc to 0x0 */
- int retval = target_halt(target);
- if (retval != ERROR_OK)
- return retval;
-
- /* start fetching from IVB */
- uint32_t value_ir3;
- nds32_get_mapped_reg(nds32, IR3, &value_ir3);
- nds32_set_mapped_reg(nds32, PC, value_ir3 & 0xFFFF0000);
-
return ERROR_OK;
}
retval = target_halt(target);
if (retval != ERROR_OK)
return retval;
- /* call target_poll() to avoid "Halt timed out" */
- CHECK_RETVAL(target_poll(target));
- } else {
- jtag_poll_set_enabled(false);
}
return ERROR_OK;
LOG_WARNING("<-- TARGET WARNING! Insert too many hardware "
"breakpoints/watchpoints! The limit of "
"combined hardware breakpoints/watchpoints "
- "is %d. -->", nds32_v2->n_hbr);
+ "is %" PRId32 ". -->", nds32_v2->n_hbr);
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
if (nds32_v2->n_hbr <= nds32_v2->next_hbr_index) {
LOG_WARNING("<-- TARGET WARNING! Insert too many hardware "
"breakpoints/watchpoints! The limit of "
- "combined hardware breakpoints/watchpoints is %d. -->", nds32_v2->n_hbr);
+ "combined hardware breakpoints/watchpoints is %" PRId32 ". -->", nds32_v2->n_hbr);
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
nds32_v2->next_hbr_index = 0;
- LOG_INFO("%s: total hardware breakpoint %d", target_name(target),
+ LOG_INFO("%s: total hardware breakpoint %" PRId32, target_name(target),
nds32_v2->n_hbr);
nds32->target->state = TARGET_RUNNING;
.assert_reset = nds32_assert_reset,
.deassert_reset = nds32_v2_deassert_reset,
- .soft_reset_halt = nds32_v2_soft_reset_halt,
/* register access */
.get_gdb_reg_list = nds32_get_gdb_reg_list,
projects / fw / openocd / blobdiff