LOG_DEBUG("entered debug state at PC 0x%" PRIx32 ", target->state: %s",
*(uint32_t*)(mips32->core_cache->reg_list[MIPS32_PC].value),
- Jim_Nvp_value2name_simple( nvp_target_state, target->state )->name);
+ target_state_name(target));
return ERROR_OK;
}
target->state = TARGET_RUNNING;
}
-// LOG_DEBUG("ctrl=0x%08X", ejtag_ctrl);
+// LOG_DEBUG("ctrl = 0x%08X", ejtag_ctrl);
return ERROR_OK;
}
mips_ejtag_t *ejtag_info = &mips32->ejtag_info;
LOG_DEBUG("target->state: %s",
- Jim_Nvp_value2name_simple( nvp_target_state, target->state )->name);
+ target_state_name(target));
if (target->state == TARGET_HALTED)
{
mips_ejtag_t *ejtag_info = &mips32->ejtag_info;
LOG_DEBUG("target->state: %s",
- Jim_Nvp_value2name_simple( nvp_target_state, target->state )->name);
+ target_state_name(target));
enum reset_types jtag_reset_config = jtag_get_reset_config();
if (!(jtag_reset_config & RESET_HAS_SRST))
if (target->reset_halt)
{
int retval;
- if ((retval = target_halt(target))!=ERROR_OK)
+ if ((retval = target_halt(target)) != ERROR_OK)
return retval;
}
int mips_m4k_deassert_reset(target_t *target)
{
LOG_DEBUG("target->state: %s",
- Jim_Nvp_value2name_simple( nvp_target_state, target->state )->name);
+ target_state_name(target));
/* deassert reset lines */
jtag_add_reset(0, 0);
/* disable interrupts while stepping */
mips32_enable_interrupts(target, 0);
-
+
/* exit debug mode */
mips_ejtag_exit_debug(ejtag_info);
/* enable interrupts if we are running */
mips32_enable_interrupts(target, !debug_execution);
-
+
/* exit debug mode */
mips_ejtag_exit_debug(ejtag_info);
target->debug_reason = DBG_REASON_NOTHALTED;
/* disable interrupts while stepping */
mips32_enable_interrupts(target, 0);
-
+
/* exit debug mode */
mips_ejtag_exit_debug(ejtag_info);
mips32_common_t *mips32 = target->arch_info;
mips32_comparator_t * comparator_list = mips32->inst_break_list;
int retval;
-
+
if (breakpoint->set)
{
LOG_WARNING("breakpoint already set");
{
int bp_num = 0;
- while(comparator_list[bp_num].used && (bp_num < mips32->num_inst_bpoints))
+ while (comparator_list[bp_num].used && (bp_num < mips32->num_inst_bpoints))
bp_num++;
if (bp_num >= mips32->num_inst_bpoints)
{
- LOG_DEBUG("ERROR Can not find free FP Comparator");
+ LOG_DEBUG("ERROR Can not find free FP Comparator(bpid: %d)",
+ breakpoint->unique_id );
LOG_WARNING("ERROR Can not find free FP Comparator");
exit(-1);
}
target_write_u32(target, comparator_list[bp_num].reg_address, comparator_list[bp_num].bp_value);
target_write_u32(target, comparator_list[bp_num].reg_address + 0x08, 0x00000000);
target_write_u32(target, comparator_list[bp_num].reg_address + 0x18, 1);
- LOG_DEBUG("bp_num %i bp_value 0x%" PRIx32 "", bp_num, comparator_list[bp_num].bp_value);
+ LOG_DEBUG("bpid: %d, bp_num %i bp_value 0x%" PRIx32 "",
+ breakpoint->unique_id,
+ bp_num, comparator_list[bp_num].bp_value);
}
else if (breakpoint->type == BKPT_SOFT)
{
+ LOG_DEBUG("bpid: %d", breakpoint->unique_id );
if (breakpoint->length == 4)
{
uint32_t verify = 0xffffffff;
-
+
if ((retval = target_read_memory(target, breakpoint->address, breakpoint->length, 1, breakpoint->orig_instr)) != ERROR_OK)
{
return retval;
{
return retval;
}
-
+
if ((retval = target_read_u32(target, breakpoint->address, &verify)) != ERROR_OK)
{
return retval;
else
{
uint16_t verify = 0xffff;
-
+
if ((retval = target_read_memory(target, breakpoint->address, breakpoint->length, 1, breakpoint->orig_instr)) != ERROR_OK)
{
return retval;
{
return retval;
}
-
+
if ((retval = target_read_u16(target, breakpoint->address, &verify)) != ERROR_OK)
{
return retval;
return ERROR_OK;
}
}
-
+
breakpoint->set = 20; /* Any nice value but 0 */
}
mips32_common_t *mips32 = target->arch_info;
mips32_comparator_t * comparator_list = mips32->inst_break_list;
int retval;
-
+
if (!breakpoint->set)
{
LOG_WARNING("breakpoint not set");
int bp_num = breakpoint->set - 1;
if ((bp_num < 0) || (bp_num >= mips32->num_inst_bpoints))
{
- LOG_DEBUG("Invalid FP Comparator number in breakpoint");
+ LOG_DEBUG("Invalid FP Comparator number in breakpoint (bpid: %d)",
+ breakpoint->unique_id);
return ERROR_OK;
}
+ LOG_DEBUG("bpid: %d - releasing hw: %d",
+ breakpoint->unique_id,
+ bp_num );
comparator_list[bp_num].used = 0;
comparator_list[bp_num].bp_value = 0;
target_write_u32(target, comparator_list[bp_num].reg_address + 0x18, 0);
+
}
else
{
/* restore original instruction (kept in target endianness) */
+ LOG_DEBUG("bpid: %d", breakpoint->unique_id);
if (breakpoint->length == 4)
{
uint32_t current_instr;
-
+
/* check that user program has not modified breakpoint instruction */
if ((retval = target_read_memory(target, breakpoint->address, 4, 1, (uint8_t*)¤t_instr)) != ERROR_OK)
{
else
{
uint16_t current_instr;
-
+
/* check that user program has not modified breakpoint instruction */
if ((retval = target_read_memory(target, breakpoint->address, 2, 1, (uint8_t*)¤t_instr)) != ERROR_OK)
{
return retval;
}
-
+
if (current_instr == MIPS16_SDBBP)
{
if ((retval = target_write_memory(target, breakpoint->address, 2, 1, breakpoint->orig_instr)) != ERROR_OK)
LOG_INFO("no hardware breakpoint available");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
-
+
mips32->num_inst_bpoints_avail--;
- }
+ }
mips_m4k_set_breakpoint(target, breakpoint);
int mips_m4k_set_watchpoint(struct target_s *target, watchpoint_t *watchpoint)
{
- /* TODO */
+ mips32_common_t *mips32 = target->arch_info;
+ mips32_comparator_t * comparator_list = mips32->data_break_list;
+ int wp_num = 0;
+ /*
+ * watchpoint enabled, ignore all byte lanes in value register
+ * and exclude both load and store accesses from watchpoint
+ * condition evaluation
+ */
+ int enable = EJTAG_DBCn_NOSB | EJTAG_DBCn_NOLB | EJTAG_DBCn_BE |
+ (0xff << EJTAG_DBCn_BLM_SHIFT);
+
+ if (watchpoint->set)
+ {
+ LOG_WARNING("watchpoint already set");
+ return ERROR_OK;
+ }
+
+ while(comparator_list[wp_num].used && (wp_num < mips32->num_data_bpoints))
+ wp_num++;
+ if (wp_num >= mips32->num_data_bpoints)
+ {
+ LOG_DEBUG("ERROR Can not find free FP Comparator");
+ LOG_WARNING("ERROR Can not find free FP Comparator");
+ exit(-1);
+ }
+
+ if (watchpoint->length != 4)
+ {
+ LOG_ERROR("Only watchpoints of length 4 are supported");
+ return ERROR_TARGET_UNALIGNED_ACCESS;
+ }
+
+ if (watchpoint->address % 4)
+ {
+ LOG_ERROR("Watchpoints address should be word aligned");
+ return ERROR_TARGET_UNALIGNED_ACCESS;
+ }
+
+ switch (watchpoint->rw)
+ {
+ case WPT_READ:
+ enable &= ~EJTAG_DBCn_NOLB;
+ break;
+ case WPT_WRITE:
+ enable &= ~EJTAG_DBCn_NOSB;
+ break;
+ case WPT_ACCESS:
+ enable &= ~(EJTAG_DBCn_NOLB | EJTAG_DBCn_NOSB);
+ break;
+ default:
+ LOG_ERROR("BUG: watchpoint->rw neither read, write nor access");
+ }
+
+ watchpoint->set = wp_num + 1;
+ comparator_list[wp_num].used = 1;
+ comparator_list[wp_num].bp_value = watchpoint->address;
+ target_write_u32(target, comparator_list[wp_num].reg_address, comparator_list[wp_num].bp_value);
+ target_write_u32(target, comparator_list[wp_num].reg_address + 0x08, 0x00000000);
+ target_write_u32(target, comparator_list[wp_num].reg_address + 0x10, 0x00000000);
+ target_write_u32(target, comparator_list[wp_num].reg_address + 0x18, enable);
+ target_write_u32(target, comparator_list[wp_num].reg_address + 0x20, 0);
+ LOG_DEBUG("wp_num %i bp_value 0x%" PRIx32 "", wp_num, comparator_list[wp_num].bp_value);
+
return ERROR_OK;
}
int mips_m4k_unset_watchpoint(struct target_s *target, watchpoint_t *watchpoint)
{
- /* TODO */
+ /* get pointers to arch-specific information */
+ mips32_common_t *mips32 = target->arch_info;
+ mips32_comparator_t * comparator_list = mips32->data_break_list;
+
+ if (!watchpoint->set)
+ {
+ LOG_WARNING("watchpoint not set");
+ return ERROR_OK;
+ }
+
+ int wp_num = watchpoint->set - 1;
+ if ((wp_num < 0) || (wp_num >= mips32->num_data_bpoints))
+ {
+ LOG_DEBUG("Invalid FP Comparator number in watchpoint");
+ return ERROR_OK;
+ }
+ comparator_list[wp_num].used = 0;
+ comparator_list[wp_num].bp_value = 0;
+ target_write_u32(target, comparator_list[wp_num].reg_address + 0x18, 0);
+ watchpoint->set = 0;
+
return ERROR_OK;
}
int mips_m4k_add_watchpoint(struct target_s *target, watchpoint_t *watchpoint)
{
- /* TODO */
+ mips32_common_t *mips32 = target->arch_info;
+
+ if (mips32->num_data_bpoints_avail < 1)
+ {
+ LOG_INFO("no hardware watchpoints available");
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ }
+
+ mips32->num_data_bpoints_avail--;
+
+ mips_m4k_set_watchpoint(target, watchpoint);
return ERROR_OK;
}
int mips_m4k_remove_watchpoint(struct target_s *target, watchpoint_t *watchpoint)
{
- /* TODO */
+ /* get pointers to arch-specific information */
+ mips32_common_t *mips32 = target->arch_info;
+
+ if (target->state != TARGET_HALTED)
+ {
+ LOG_WARNING("target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ if (watchpoint->set)
+ {
+ mips_m4k_unset_watchpoint(target, watchpoint);
+ }
+
+ mips32->num_data_bpoints_avail++;
+
return ERROR_OK;
}
if (ERROR_OK != retval)
return retval;
- /* TAP data register is loaded LSB first (little endian) */
- if (target->endianness == TARGET_BIG_ENDIAN)
- {
- uint32_t i, t32;
- uint16_t t16;
-
- for(i = 0; i < (count*size); i += size)
- {
- switch(size)
- {
- case 4:
- t32 = le_to_h_u32(&buffer[i]);
- h_u32_to_be(&buffer[i], t32);
- break;
- case 2:
- t16 = le_to_h_u16(&buffer[i]);
- h_u16_to_be(&buffer[i], t16);
- break;
- }
- }
- }
-
return ERROR_OK;
}
if (((size == 4) && (address & 0x3u)) || ((size == 2) && (address & 0x1u)))
return ERROR_TARGET_UNALIGNED_ACCESS;
- /* TAP data register is loaded LSB first (little endian) */
- if (target->endianness == TARGET_BIG_ENDIAN)
- {
- uint32_t i, t32;
- uint16_t t16;
-
- for(i = 0; i < (count*size); i += size)
- {
- switch(size)
- {
- case 4:
- t32 = be_to_h_u32(&buffer[i]);
- h_u32_to_le(&buffer[i], t32);
- break;
- case 2:
- t16 = be_to_h_u16(&buffer[i]);
- h_u16_to_le(&buffer[i], t16);
- break;
- }
- }
- }
-
/* if noDMA off, use DMAACC mode for memory write */
if (ejtag_info->impcode & EJTAG_IMP_NODMA)
return mips32_pracc_write_mem(ejtag_info, address, size, count, (void *)buffer);
{
mips_ejtag_get_idcode(ejtag_info, &idcode);
ejtag_info->idcode = idcode;
-
+
if (((idcode >> 1) & 0x7FF) == 0x29)
{
/* we are using a pic32mx so select ejtag port