-/* SPDX-License-Identifier: GPL-2.0-or-later */
+// SPDX-License-Identifier: GPL-2.0-or-later
/**
* @file
struct arm_tpiu_swo_object {
struct list_head lh;
struct adiv5_mem_ap_spot spot;
+ struct adiv5_ap *ap;
char *name;
struct arm_tpiu_swo_event_action *event_action;
/* record enable before init */
if (obj->out_filename && obj->out_filename[0] == ':')
list_for_each_entry(c, &obj->connections, lh)
if (connection_write(c->connection, buf, size) != (int)size)
- retval = ERROR_FAIL;
+ LOG_ERROR("Error writing to connection"); /* FIXME: which connection? */
return ERROR_OK;
}
ea = next;
}
+ if (obj->ap)
+ dap_put_ap(obj->ap);
+
free(obj->name);
free(obj->out_filename);
free(obj);
static int arm_tpiu_swo_configure(struct jim_getopt_info *goi, struct arm_tpiu_swo_object *obj)
{
- assert(obj != NULL);
+ assert(obj);
if (goi->isconfigure && obj->enabled) {
Jim_SetResultFormatted(goi->interp, "Cannot configure TPIU/SWO; %s is enabled!", obj->name);
return mem_ap_read_atomic_u32(tpiu_ap, address, value);
}
+static const struct service_driver arm_tpiu_swo_service_driver = {
+ .name = "tpiu_swo_trace",
+ .new_connection_during_keep_alive_handler = NULL,
+ .new_connection_handler = arm_tpiu_swo_service_new_connection,
+ .input_handler = arm_tpiu_swo_service_input,
+ .connection_closed_handler = arm_tpiu_swo_service_connection_closed,
+ .keep_client_alive_handler = NULL,
+};
+
static int jim_arm_tpiu_swo_enable(Jim_Interp *interp, int argc, Jim_Obj *const *argv)
{
struct command *c = jim_to_command(interp);
struct arm_tpiu_swo_object *obj = c->jim_handler_data;
struct command_context *cmd_ctx = current_command_context(interp);
- struct adiv5_ap *tpiu_ap = dap_ap(obj->spot.dap, obj->spot.ap_num);
uint32_t value;
int retval;
if (obj->enabled)
return JIM_OK;
- if (transport_is_hla() && obj->spot.ap_num > 0) {
- LOG_ERROR("Invalid access port %d. Only AP#0 allowed with hla transport", obj->spot.ap_num);
+ if (transport_is_hla() && obj->spot.ap_num != 0) {
+ LOG_ERROR("Invalid access port 0x%" PRIx64 ". Only AP#0 allowed with hla transport", obj->spot.ap_num);
return JIM_ERR;
}
}
if (obj->pin_protocol == TPIU_SPPR_PROTOCOL_MANCHESTER || obj->pin_protocol == TPIU_SPPR_PROTOCOL_UART)
- if (!obj->swo_pin_freq) {
- LOG_ERROR("SWO pin frequency not set");
- return JIM_ERR;
- }
+ if (!obj->swo_pin_freq)
+ LOG_DEBUG("SWO pin frequency not set, will be autodetected by the adapter");
struct target *target = get_current_target(cmd_ctx);
struct cortex_m_common *cm = target_to_cm(target);
obj->recheck_ap_cur_target = false;
obj->spot.ap_num = cm->armv7m.debug_ap->ap_num;
- tpiu_ap = dap_ap(obj->spot.dap, obj->spot.ap_num);
if (obj->spot.ap_num == 0)
LOG_INFO(MSG "Confirmed TPIU %s is on AP 0", obj->name);
else
- LOG_INFO(MSG "Target %s is on AP %d. Revised command is "
- "\'tpiu create %s -dap %s -ap-num %d\'",
+ LOG_INFO(MSG "Target %s is on AP#0x%" PRIx64 ". Revised command is "
+ "\'tpiu create %s -dap %s -ap-num 0x%" PRIx64 "\'",
target_name(target), obj->spot.ap_num,
obj->name, adiv5_dap_name(obj->spot.dap), obj->spot.ap_num);
}
/* END_DEPRECATED_TPIU */
+ if (!obj->ap) {
+ obj->ap = dap_get_ap(obj->spot.dap, obj->spot.ap_num);
+ if (!obj->ap) {
+ LOG_ERROR("Cannot get AP");
+ return JIM_ERR;
+ }
+ }
+
/* trigger the event before any attempt to R/W in the TPIU/SWO */
arm_tpiu_swo_handle_event(obj, TPIU_SWO_EVENT_PRE_ENABLE);
- retval = wrap_read_u32(target, tpiu_ap, obj->spot.base + TPIU_DEVID_OFFSET, &value);
+ retval = wrap_read_u32(target, obj->ap, obj->spot.base + TPIU_DEVID_OFFSET, &value);
if (retval != ERROR_OK) {
LOG_ERROR("Unable to read %s", obj->name);
return JIM_ERR;
}
if (obj->pin_protocol == TPIU_SPPR_PROTOCOL_SYNC) {
- retval = wrap_read_u32(target, tpiu_ap, obj->spot.base + TPIU_SSPSR_OFFSET, &value);
+ retval = wrap_read_u32(target, obj->ap, obj->spot.base + TPIU_SSPSR_OFFSET, &value);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("Cannot read TPIU register SSPSR");
+ return JIM_ERR;
+ }
if (!(value & BIT(obj->port_width - 1))) {
LOG_ERROR("TPIU does not support port-width of %d bits", obj->port_width);
return JIM_ERR;
}
priv->obj = obj;
LOG_INFO("starting trace server for %s on %s", obj->name, &obj->out_filename[1]);
- retval = add_service("tpiu_swo_trace", &obj->out_filename[1],
- CONNECTION_LIMIT_UNLIMITED, arm_tpiu_swo_service_new_connection,
- arm_tpiu_swo_service_input, arm_tpiu_swo_service_connection_closed,
- priv);
+ retval = add_service(&arm_tpiu_swo_service_driver, &obj->out_filename[1],
+ CONNECTION_LIMIT_UNLIMITED, priv);
if (retval != ERROR_OK) {
LOG_ERROR("Can't configure trace TCP port %s", &obj->out_filename[1]);
return JIM_ERR;
return JIM_ERR;
}
+ if (obj->pin_protocol == TPIU_SPPR_PROTOCOL_MANCHESTER || obj->pin_protocol == TPIU_SPPR_PROTOCOL_UART)
+ if (!swo_pin_freq) {
+ if (obj->swo_pin_freq)
+ LOG_ERROR("Adapter rejected SWO pin frequency %d Hz", obj->swo_pin_freq);
+ else
+ LOG_ERROR("Adapter does not support auto-detection of SWO pin frequency nor a default value");
+
+ arm_tpiu_swo_close_output(obj);
+ return JIM_ERR;
+ }
+
if (obj->swo_pin_freq != swo_pin_freq)
LOG_INFO("SWO pin data rate adjusted by adapter to %d Hz", swo_pin_freq);
obj->swo_pin_freq = swo_pin_freq;
obj->swo_pin_freq = swo_pin_freq;
}
- retval = wrap_write_u32(target, tpiu_ap, obj->spot.base + TPIU_CSPSR_OFFSET, BIT(obj->port_width - 1));
+ retval = wrap_write_u32(target, obj->ap, obj->spot.base + TPIU_CSPSR_OFFSET, BIT(obj->port_width - 1));
if (retval != ERROR_OK)
goto error_exit;
- retval = wrap_write_u32(target, tpiu_ap, obj->spot.base + TPIU_ACPR_OFFSET, prescaler - 1);
+ retval = wrap_write_u32(target, obj->ap, obj->spot.base + TPIU_ACPR_OFFSET, prescaler - 1);
if (retval != ERROR_OK)
goto error_exit;
- retval = wrap_write_u32(target, tpiu_ap, obj->spot.base + TPIU_SPPR_OFFSET, obj->pin_protocol);
+ retval = wrap_write_u32(target, obj->ap, obj->spot.base + TPIU_SPPR_OFFSET, obj->pin_protocol);
if (retval != ERROR_OK)
goto error_exit;
- retval = wrap_read_u32(target, tpiu_ap, obj->spot.base + TPIU_FFCR_OFFSET, &value);
+ retval = wrap_read_u32(target, obj->ap, obj->spot.base + TPIU_FFCR_OFFSET, &value);
if (retval != ERROR_OK)
goto error_exit;
if (obj->en_formatter)
value |= BIT(1);
else
value &= ~BIT(1);
- retval = wrap_write_u32(target, tpiu_ap, obj->spot.base + TPIU_FFCR_OFFSET, value);
+ retval = wrap_write_u32(target, obj->ap, obj->spot.base + TPIU_FFCR_OFFSET, value);
if (retval != ERROR_OK)
goto error_exit;
arm_tpiu_swo_handle_event(obj, TPIU_SWO_EVENT_POST_ENABLE);
+ /* START_DEPRECATED_TPIU */
+ target_handle_event(target, TARGET_EVENT_TRACE_CONFIG);
+ /* END_DEPRECATED_TPIU */
+
obj->enabled = true;
return JIM_OK;
}
arm_tpiu_swo_handle_event(obj, TPIU_SWO_EVENT_POST_DISABLE);
+
+ /* START_DEPRECATED_TPIU */
+ struct command_context *cmd_ctx = current_command_context(interp);
+ struct target *target = get_current_target(cmd_ctx);
+ target_handle_event(target, TARGET_EVENT_TRACE_CONFIG);
+ /* END_DEPRECATED_TPIU */
+
return JIM_OK;
}
int e;
cmd_ctx = current_command_context(interp);
- assert(cmd_ctx != NULL);
+ assert(cmd_ctx);
/* does this command exist? */
- cmd = Jim_GetCommand(interp, Jim_NewStringObj(interp, obj->name, -1), JIM_ERRMSG);
+ cmd = Jim_GetCommand(interp, Jim_NewStringObj(interp, obj->name, -1), JIM_NONE);
if (cmd) {
- Jim_SetResultFormatted(interp, "Command: %s Exists", obj->name);
+ Jim_SetResultFormatted(interp, "cannot create TPIU object because a command with name '%s' already exists",
+ obj->name);
return JIM_ERR;
}
struct jim_getopt_info goi;
jim_getopt_setup(&goi, interp, argc - 1, argv + 1);
if (goi.argc < 1) {
- Jim_WrongNumArgs(goi.interp, 1, goi.argv, "?name? ..options...");
+ Jim_WrongNumArgs(interp, 1, argv, "name ?option option ...?");
return JIM_ERR;
}
struct cortex_m_common *cm = target_to_cm(target);
struct adiv5_private_config *pc = target->private_config;
struct adiv5_dap *dap = pc->dap;
- int ap_num = pc->ap_num;
+ uint64_t ap_num = pc->ap_num;
bool set_recheck_ap_cur_target = false;
LOG_INFO(MSG "Adding a TPIU \'%s.tpiu\' in the configuration", target_name(target));
set_recheck_ap_cur_target = true;
}
- LOG_INFO(MSG "Running: \'tpiu create %s.tpiu -dap %s -ap-num %d\'",
+ LOG_INFO(MSG "Running: \'tpiu create %s.tpiu -dap %s -ap-num 0x%" PRIx64 "\'",
target_name(target), adiv5_dap_name(dap), ap_num);
- retval = command_run_linef(CMD_CTX, "tpiu create %s.tpiu -dap %s -ap-num %d",
+ retval = command_run_linef(CMD_CTX, "tpiu create %s.tpiu -dap %s -ap-num 0x%" PRIx64,
target_name(target), adiv5_dap_name(dap), ap_num);
if (retval != ERROR_OK)
return retval;
if (retval != ERROR_OK)
return retval;
- target_handle_event(target, TARGET_EVENT_TRACE_CONFIG);
return ERROR_OK;
}
.name = "create",
.mode = COMMAND_ANY,
.jim_handler = jim_arm_tpiu_swo_create,
- .usage = "name [-dap dap] [-ap-num num] [-address baseaddr]",
+ .usage = "name [-dap dap] [-ap-num num] [-baseaddr baseaddr]",
.help = "Creates a new TPIU or SWO object",
},
{
projects / fw / openocd / blobdiff