* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
+ * along with this program. If not, see <http://www.gnu.org/licenses/>. *
***************************************************************************/
-#ifndef ARM_ADI_V5_H
-#define ARM_ADI_V5_H
+#ifndef OPENOCD_TARGET_ARM_ADI_V5_H
+#define OPENOCD_TARGET_ARM_ADI_V5_H
/**
* @file
* resources accessed through a MEM-AP.
*/
+#include <helper/list.h>
#include "arm_jtag.h"
-/* FIXME remove these JTAG-specific decls when mem_ap_read_buf_u32()
- * is no longer JTAG-specific
- */
-#define JTAG_DP_DPACC 0xA
-#define JTAG_DP_APACC 0xB
-
/* three-bit ACK values for SWD access (sent LSB first) */
#define SWD_ACK_OK 0x1
#define SWD_ACK_WAIT 0x2
/* A[3:0] for DP registers; A[1:0] are always zero.
* - JTAG accesses all of these via JTAG_DP_DPACC, except for
* IDCODE (JTAG_DP_IDCODE) and ABORT (JTAG_DP_ABORT).
- * - SWD accesses these directly, sometimes needing SELECT.CTRLSEL
+ * - SWD accesses these directly, sometimes needing SELECT.DPBANKSEL
*/
-#define DP_IDCODE BANK_REG(0x0, 0x0) /* SWD: read */
-#define DP_ABORT BANK_REG(0x0, 0x0) /* SWD: write */
-#define DP_CTRL_STAT BANK_REG(0x0, 0x4) /* r/w */
-#define DP_RESEND BANK_REG(0x0, 0x8) /* SWD: read */
-#define DP_SELECT BANK_REG(0x0, 0x8) /* JTAG: r/w; SWD: write */
-#define DP_RDBUFF BANK_REG(0x0, 0xC) /* read-only */
-#define DP_WCR BANK_REG(0x1, 0x4) /* SWD: r/w */
-
-#define WCR_TO_TRN(wcr) ((uint32_t)(1 + (3 & ((wcr)) >> 8))) /* 1..4 clocks */
-#define WCR_TO_PRESCALE(wcr) ((uint32_t)(7 & ((wcr)))) /* impl defined */
+#define DP_DPIDR BANK_REG(0x0, 0x0) /* DPv1+: ro */
+#define DP_ABORT BANK_REG(0x0, 0x0) /* DPv1+: SWD: wo */
+#define DP_CTRL_STAT BANK_REG(0x0, 0x4) /* DPv0+: rw */
+#define DP_DLCR BANK_REG(0x1, 0x4) /* DPv1+: SWD: rw */
+#define DP_TARGETID BANK_REG(0x2, 0x4) /* DPv2: ro */
+#define DP_DLPIDR BANK_REG(0x3, 0x4) /* DPv2: ro */
+#define DP_EVENTSTAT BANK_REG(0x4, 0x4) /* DPv2: ro */
+#define DP_RESEND BANK_REG(0x0, 0x8) /* DPv1+: SWD: ro */
+#define DP_SELECT BANK_REG(0x0, 0x8) /* DPv0+: JTAG: rw; SWD: wo */
+#define DP_RDBUFF BANK_REG(0x0, 0xC) /* DPv0+: ro */
+#define DP_TARGETSEL BANK_REG(0x0, 0xC) /* DPv2: SWD: wo */
+
+#define DLCR_TO_TRN(dlcr) ((uint32_t)(1 + ((3 & (dlcr)) >> 8))) /* 1..4 clocks */
/* Fields of the DP's AP ABORT register */
#define DAPABORT (1UL << 0)
#define IDR_JEP106_ARM 0x04760000
+#define DP_SELECT_APSEL 0xFF000000
+#define DP_SELECT_APBANK 0x000000F0
+#define DP_SELECT_DPBANK 0x0000000F
+#define DP_SELECT_INVALID 0x00FFFF00 /* Reserved bits one */
+
/**
* This represents an ARM Debug Interface (v5) Access Port (AP).
* Most common is a MEM-AP, for memory access.
struct adiv5_dap {
const struct dap_ops *ops;
+ /* dap transaction list for WAIT support */
+ struct list_head cmd_journal;
+
struct jtag_tap *tap;
/* Control config */
uint32_t dp_ctrl_stat;
uint32_t apsel;
/**
- * Cache for DP_SELECT bits identifying the current AP. A DAP may
- * connect to multiple APs, such as one MEM-AP for general access,
- * another reserved for accessing debug modules, and a JTAG-DP.
- * "-1" indicates no cached value.
- */
- uint32_t ap_current;
-
- /**
- * Cache for DP_SELECT bits identifying the current four-word AP
- * register bank. This caches AP register addresss bits 7:4; JTAG
- * and SWD access primitves pass address bits 3:2; bits 1:0 are zero.
- * "-1" indicates no cached value.
- */
- uint32_t ap_bank_value;
-
- /**
- * Cache for DP_SELECT bits identifying the current four-word DP
- * register bank. This caches DP register addresss bits 7:4; JTAG
- * and SWD access primitves pass address bits 3:2; bits 1:0 are zero.
+ * Cache for DP_SELECT register. A value of DP_SELECT_INVALID
+ * indicates no cached value and forces rewrite of the register.
*/
- uint32_t dp_bank_value;
+ uint32_t select;
/* information about current pending SWjDP-AHBAP transaction */
uint8_t ack;
uint32_t data);
/** AP register read. */
- int (*queue_ap_read)(struct adiv5_dap *dap, unsigned reg,
+ int (*queue_ap_read)(struct adiv5_ap *ap, unsigned reg,
uint32_t *data);
/** AP register write. */
- int (*queue_ap_write)(struct adiv5_dap *dap, unsigned reg,
+ int (*queue_ap_write)(struct adiv5_ap *ap, unsigned reg,
uint32_t data);
/** AP operation abort. */
/** Executes all queued DAP operations. */
int (*run)(struct adiv5_dap *dap);
+
+ /** Executes all queued DAP operations but doesn't check
+ * sticky error conditions */
+ int (*sync)(struct adiv5_dap *dap);
};
/*
AP_TYPE_AXI_AP = 0x4, /* AXI Memory-AP */
};
-/* AP selection applies to future AP transactions */
-void dap_ap_select(struct adiv5_dap *dap, uint8_t ap);
-
/**
* Queue a DP register read.
* Note that not all DP registers are readable; also, that JTAG and SWD
unsigned reg, uint32_t *data)
{
assert(ap->dap->ops != NULL);
- dap_ap_select(ap->dap, ap->ap_num);
- return ap->dap->ops->queue_ap_read(ap->dap, reg, data);
+ return ap->dap->ops->queue_ap_read(ap, reg, data);
}
/**
unsigned reg, uint32_t data)
{
assert(ap->dap->ops != NULL);
- dap_ap_select(ap->dap, ap->ap_num);
- return ap->dap->ops->queue_ap_write(ap->dap, reg, data);
+ return ap->dap->ops->queue_ap_write(ap, reg, data);
}
/**
return dap->ops->run(dap);
}
+static inline int dap_sync(struct adiv5_dap *dap)
+{
+ assert(dap->ops != NULL);
+ if (dap->ops->sync)
+ return dap->ops->sync(dap);
+ return ERROR_OK;
+}
+
static inline int dap_dp_read_atomic(struct adiv5_dap *dap, unsigned reg,
uint32_t *value)
{
}
}
-/** Accessor for currently selected DAP-AP number (0..255) */
-static inline uint8_t dap_ap_get_select(struct adiv5_dap *swjdp)
-{
- return (uint8_t)(swjdp->ap_current >> 24);
-}
-
/* Queued MEM-AP memory mapped single word transfers. */
int mem_ap_read_u32(struct adiv5_ap *ap,
uint32_t address, uint32_t *value);
extern const struct command_registration dap_command_handlers[];
-#endif
+#endif /* OPENOCD_TARGET_ARM_ADI_V5_H */
projects / fw / openocd / blobdiff