return retval;
}
-int jtagdp_transaction_endcheck(struct swjdp_common *swjdp)
+static int jtagdp_transaction_endcheck(struct swjdp_common *swjdp)
{
int retval;
uint32_t ctrlstat;
adi_jtag_scan_inout_check_u32(swjdp, JTAG_DP_DPACC,
DP_CTRL_STAT, DPAP_READ, 0, &ctrlstat);
- if ((retval = jtag_execute_queue()) != ERROR_OK)
+ if ((retval = dap_run(swjdp)) != ERROR_OK)
return retval;
swjdp->ack = swjdp->ack & 0x7;
}
| SSTICKYERR, NULL);
adi_jtag_scan_inout_check_u32(swjdp, JTAG_DP_DPACC,
DP_CTRL_STAT, DPAP_READ, 0, &ctrlstat);
- if ((retval = jtag_execute_queue()) != ERROR_OK)
+ if ((retval = dap_run(swjdp)) != ERROR_OK)
return retval;
LOG_DEBUG("jtag-dp: CTRL/STAT 0x%" PRIx32, ctrlstat);
- dap_ap_read_reg_u32(swjdp, AP_REG_CSW, &mem_ap_csw);
- dap_ap_read_reg_u32(swjdp, AP_REG_TAR, &mem_ap_tar);
- if ((retval = jtag_execute_queue()) != ERROR_OK)
+ retval = dap_queue_ap_read(swjdp,
+ AP_REG_CSW, &mem_ap_csw);
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = dap_queue_ap_read(swjdp,
+ AP_REG_TAR, &mem_ap_tar);
+ if (retval != ERROR_OK)
+ return retval;
+
+ if ((retval = dap_run(swjdp)) != ERROR_OK)
return retval;
LOG_ERROR("MEM_AP_CSW 0x%" PRIx32 ", MEM_AP_TAR 0x%"
PRIx32, mem_ap_csw, mem_ap_tar);
}
- if ((retval = jtag_execute_queue()) != ERROR_OK)
+ if ((retval = dap_run(swjdp)) != ERROR_OK)
return retval;
return ERROR_JTAG_DEVICE_ERROR;
}
* *
***************************************************************************/
-static int dap_dp_write_reg(struct swjdp_common *swjdp,
- uint32_t value, uint8_t reg_addr)
-{
- return adi_jtag_scan_inout_check_u32(swjdp, JTAG_DP_DPACC,
- reg_addr, DPAP_WRITE, value, NULL);
-}
-
-static int dap_dp_read_reg(struct swjdp_common *swjdp,
- uint32_t *value, uint8_t reg_addr)
-{
- return adi_jtag_scan_inout_check_u32(swjdp, JTAG_DP_DPACC,
- reg_addr, DPAP_READ, 0, value);
-}
-
/**
* Select one of the APs connected to the specified DAP. The
* selection is implicitly used with future AP transactions.
}
}
-/** Select the AP register bank matching bits 7:4 of ap_reg. */
-static int dap_ap_bankselect(struct swjdp_common *swjdp, uint32_t ap_reg)
-{
- uint32_t select = (ap_reg & 0x000000F0);
-
- if (select != swjdp->ap_bank_value)
- {
- swjdp->ap_bank_value = select;
- select |= swjdp->apsel;
- return dap_dp_write_reg(swjdp, select, DP_SELECT);
- } else
- return ERROR_OK;
-}
-
-static int dap_ap_write_reg(struct swjdp_common *swjdp,
- uint32_t reg_addr, uint8_t *out_value_buf)
-{
- int retval;
-
- retval = dap_ap_bankselect(swjdp, reg_addr);
- if (retval != ERROR_OK)
- return retval;
-
- return adi_jtag_ap_write_check(swjdp, reg_addr, out_value_buf);
-}
-
-/**
- * Asynchronous (queued) AP register write.
- *
- * @param swjdp The DAP whose currently selected AP will be written.
- * @param reg_addr Eight bit AP register address.
- * @param value Word to be written at reg_addr
- *
- * @return ERROR_OK if the transaction was properly queued, else a fault code.
- */
-int dap_ap_write_reg_u32(struct swjdp_common *swjdp,
- uint32_t reg_addr, uint32_t value)
-{
- uint8_t out_value_buf[4];
-
- buf_set_u32(out_value_buf, 0, 32, value);
- return dap_ap_write_reg(swjdp,
- reg_addr, out_value_buf);
-}
-
-/**
- * Asynchronous (queued) AP register eread.
- *
- * @param swjdp The DAP whose currently selected AP will be read.
- * @param reg_addr Eight bit AP register address.
- * @param value Points to where the 32-bit (little-endian) word will be stored.
- *
- * @return ERROR_OK if the transaction was properly queued, else a fault code.
- */
-int dap_ap_read_reg_u32(struct swjdp_common *swjdp,
- uint32_t reg_addr, uint32_t *value)
-{
- int retval;
-
- retval = dap_ap_bankselect(swjdp, reg_addr);
- if (retval != ERROR_OK)
- return retval;
-
- return adi_jtag_scan_inout_check_u32(swjdp, JTAG_DP_APACC, reg_addr,
- DPAP_READ, 0, value);
-}
-
/**
* Queue transactions setting up transfer parameters for the
* currently selected MEM-AP.
if (csw != swjdp->ap_csw_value)
{
/* LOG_DEBUG("DAP: Set CSW %x",csw); */
- retval = dap_ap_write_reg_u32(swjdp, AP_REG_CSW, csw);
+ retval = dap_queue_ap_write(swjdp, AP_REG_CSW, csw);
if (retval != ERROR_OK)
return retval;
swjdp->ap_csw_value = csw;
if (tar != swjdp->ap_tar_value)
{
/* LOG_DEBUG("DAP: Set TAR %x",tar); */
- retval = dap_ap_write_reg_u32(swjdp, AP_REG_TAR, tar);
+ retval = dap_queue_ap_write(swjdp, AP_REG_TAR, tar);
if (retval != ERROR_OK)
return retval;
swjdp->ap_tar_value = tar;
if (retval != ERROR_OK)
return retval;
- return dap_ap_read_reg_u32(swjdp, AP_REG_BD0 | (address & 0xC), value);
+ return dap_queue_ap_read(swjdp, AP_REG_BD0 | (address & 0xC), value);
}
/**
if (retval != ERROR_OK)
return retval;
- return jtagdp_transaction_endcheck(swjdp);
+ return dap_run(swjdp);
}
/**
if (retval != ERROR_OK)
return retval;
- return dap_ap_write_reg_u32(swjdp, AP_REG_BD0 | (address & 0xC),
+ return dap_queue_ap_write(swjdp, AP_REG_BD0 | (address & 0xC),
value);
}
if (retval != ERROR_OK)
return retval;
- return jtagdp_transaction_endcheck(swjdp);
+ return dap_run(swjdp);
}
/*****************************************************************************
for (writecount = 0; writecount < blocksize; writecount++)
{
- dap_ap_write_reg(swjdp, AP_REG_DRW, buffer + 4 * writecount);
+ retval = dap_queue_ap_write(swjdp, AP_REG_DRW,
+ *(uint32_t *) (buffer + 4 * writecount));
+ if (retval != ERROR_OK)
+ break;
}
- if (jtagdp_transaction_endcheck(swjdp) == ERROR_OK)
+ if (dap_run(swjdp) == ERROR_OK)
{
wcount = wcount - blocksize;
address = address + 4 * blocksize;
if (errorcount > 1)
{
LOG_WARNING("Block write error address 0x%" PRIx32 ", wcount 0x%x", address, wcount);
+ /* REVISIT return the *actual* fault code */
return ERROR_JTAG_DEVICE_ERROR;
}
}
}
memcpy(&outvalue, buffer, sizeof(uint32_t));
- dap_ap_write_reg_u32(swjdp, AP_REG_DRW, outvalue);
- if (jtagdp_transaction_endcheck(swjdp) != ERROR_OK)
+ retval = dap_queue_ap_write(swjdp,
+ AP_REG_DRW, outvalue);
+ if (retval != ERROR_OK)
+ break;
+
+ if (dap_run(swjdp) != ERROR_OK)
{
LOG_WARNING("Block write error address "
"0x%" PRIx32 ", count 0x%x",
address, count);
+ /* REVISIT return *actual* fault code */
return ERROR_JTAG_DEVICE_ERROR;
}
}
uint16_t svalue;
memcpy(&svalue, buffer, sizeof(uint16_t));
uint32_t outvalue = (uint32_t)svalue << 8 * (address & 0x3);
- dap_ap_write_reg_u32(swjdp, AP_REG_DRW, outvalue);
- retval = jtagdp_transaction_endcheck(swjdp);
+ retval = dap_queue_ap_write(swjdp, AP_REG_DRW, outvalue);
+ if (retval != ERROR_OK)
+ break;
+
+ retval = dap_run(swjdp);
+ if (retval != ERROR_OK)
+ break;
+
count -= 2;
address += 2;
buffer += 2;
}
memcpy(&outvalue, buffer, sizeof(uint32_t));
- dap_ap_write_reg_u32(swjdp, AP_REG_DRW, outvalue);
- if (jtagdp_transaction_endcheck(swjdp) != ERROR_OK)
+ retval = dap_queue_ap_write(swjdp,
+ AP_REG_DRW, outvalue);
+ if (retval != ERROR_OK)
+ break;
+
+ if (dap_run(swjdp) != ERROR_OK)
{
LOG_WARNING("Block write error address "
"0x%" PRIx32 ", count 0x%x",
address, count);
+ /* REVISIT return *actual* fault code */
return ERROR_JTAG_DEVICE_ERROR;
}
}
{
dap_setup_accessport(swjdp, CSW_8BIT | CSW_ADDRINC_SINGLE, address);
uint32_t outvalue = (uint32_t)*buffer << 8 * (address & 0x3);
- dap_ap_write_reg_u32(swjdp, AP_REG_DRW, outvalue);
- retval = jtagdp_transaction_endcheck(swjdp);
+ retval = dap_queue_ap_write(swjdp, AP_REG_DRW, outvalue);
+ if (retval != ERROR_OK)
+ break;
+
+ retval = dap_run(swjdp);
+ if (retval != ERROR_OK)
+ break;
+
count--;
address++;
buffer++;
dap_setup_accessport(swjdp, CSW_32BIT | CSW_ADDRINC_SINGLE,
address);
+ /* FIXME remove these three calls to adi_jtag_dp_scan(),
+ * so this routine becomes transport-neutral. Be careful
+ * not to cause performance problems with JTAG; would it
+ * suffice to loop over dap_queue_ap_read(), or would that
+ * be slower when JTAG is the chosen transport?
+ */
+
/* Scan out first read */
adi_jtag_dp_scan(swjdp, JTAG_DP_APACC, AP_REG_DRW,
DPAP_READ, 0, NULL, NULL);
adi_jtag_dp_scan(swjdp, JTAG_DP_DPACC, DP_RDBUFF,
DPAP_READ, 0, buffer + 4 * readcount,
&swjdp->ack);
- if (jtagdp_transaction_endcheck(swjdp) == ERROR_OK)
+ if (dap_run(swjdp) == ERROR_OK)
{
wcount = wcount - blocksize;
address += 4 * blocksize;
{
LOG_WARNING("Block read error address 0x%" PRIx32
", count 0x%x", address, count);
+ /* REVISIT return the *actual* fault code */
return ERROR_JTAG_DEVICE_ERROR;
}
}
do
{
- dap_ap_read_reg_u32(swjdp, AP_REG_DRW, &invalue);
- if (jtagdp_transaction_endcheck(swjdp) != ERROR_OK)
+ retval = dap_queue_ap_read(swjdp, AP_REG_DRW, &invalue);
+ if (dap_run(swjdp) != ERROR_OK)
{
LOG_WARNING("Block read error address 0x%" PRIx32 ", count 0x%x", address, count);
+ /* REVISIT return the *actual* fault code */
return ERROR_JTAG_DEVICE_ERROR;
}
while (count > 0)
{
dap_setup_accessport(swjdp, CSW_16BIT | CSW_ADDRINC_SINGLE, address);
- dap_ap_read_reg_u32(swjdp, AP_REG_DRW, &invalue);
- retval = jtagdp_transaction_endcheck(swjdp);
+ retval = dap_queue_ap_read(swjdp, AP_REG_DRW, &invalue);
+ if (retval != ERROR_OK)
+ break;
+
+ retval = dap_run(swjdp);
+ if (retval != ERROR_OK)
+ break;
+
if (address & 0x1)
{
for (i = 0; i < 2; i++)
do
{
- dap_ap_read_reg_u32(swjdp, AP_REG_DRW, &invalue);
- if (jtagdp_transaction_endcheck(swjdp) != ERROR_OK)
+ retval = dap_queue_ap_read(swjdp, AP_REG_DRW, &invalue);
+ if (dap_run(swjdp) != ERROR_OK)
{
LOG_WARNING("Block read error address 0x%" PRIx32 ", count 0x%x", address, count);
+ /* REVISIT return the *actual* fault code */
return ERROR_JTAG_DEVICE_ERROR;
}
while (count > 0)
{
dap_setup_accessport(swjdp, CSW_8BIT | CSW_ADDRINC_SINGLE, address);
- dap_ap_read_reg_u32(swjdp, AP_REG_DRW, &invalue);
- retval = jtagdp_transaction_endcheck(swjdp);
+ retval = dap_queue_ap_read(swjdp, AP_REG_DRW, &invalue);
+ retval = dap_run(swjdp);
+ if (retval != ERROR_OK)
+ break;
+
*((uint8_t*)buffer) = (invalue >> 8 * (address & 0x3));
count--;
address++;
return retval;
}
+/*--------------------------------------------------------------------------*/
+
+static int jtag_idcode_q_read(struct swjdp_common *dap,
+ uint8_t *ack, uint32_t *data)
+{
+ struct arm_jtag *jtag_info = dap->jtag_info;
+ int retval;
+ struct scan_field fields[1];
+
+ jtag_set_end_state(TAP_IDLE);
+
+ /* This is a standard JTAG operation -- no DAP tweakage */
+ retval = arm_jtag_set_instr(jtag_info, JTAG_DP_IDCODE, NULL);
+ if (retval != ERROR_OK)
+ return retval;
+
+ fields[0].tap = jtag_info->tap;
+ fields[0].num_bits = 32;
+ fields[0].out_value = NULL;
+ fields[0].in_value = (void *) data;
+
+ jtag_add_dr_scan(1, fields, jtag_get_end_state());
+ retval = jtag_get_error();
+ if (retval != ERROR_OK)
+ return retval;
+
+ jtag_add_callback(arm_le_to_h_u32,
+ (jtag_callback_data_t) data);
+
+ return retval;
+}
+
+static int jtag_dp_q_read(struct swjdp_common *dap, unsigned reg,
+ uint32_t *data)
+{
+ return adi_jtag_scan_inout_check_u32(dap, JTAG_DP_DPACC,
+ reg, DPAP_READ, 0, data);
+}
+
+static int jtag_dp_q_write(struct swjdp_common *dap, unsigned reg,
+ uint32_t data)
+{
+ return adi_jtag_scan_inout_check_u32(dap, JTAG_DP_DPACC,
+ reg, DPAP_WRITE, data, NULL);
+}
+
+/** Select the AP register bank matching bits 7:4 of reg. */
+static int jtag_ap_q_bankselect(struct swjdp_common *dap, unsigned reg)
+{
+ uint32_t select = reg & 0x000000F0;
+
+ if (select == dap->ap_bank_value)
+ return ERROR_OK;
+ dap->ap_bank_value = select;
+
+ select |= dap->apsel;
+
+ return jtag_dp_q_write(dap, DP_SELECT, select);
+}
+
+static int jtag_ap_q_read(struct swjdp_common *dap, unsigned reg,
+ uint32_t *data)
+{
+ int retval = jtag_ap_q_bankselect(dap, reg);
+
+ if (retval != ERROR_OK)
+ return retval;
+
+ return adi_jtag_scan_inout_check_u32(dap, JTAG_DP_APACC, reg,
+ DPAP_READ, 0, data);
+}
+
+static int jtag_ap_q_write(struct swjdp_common *dap, unsigned reg,
+ uint32_t data)
+{
+ uint8_t out_value_buf[4];
+
+ int retval = jtag_ap_q_bankselect(dap, reg);
+ if (retval != ERROR_OK)
+ return retval;
+
+ buf_set_u32(out_value_buf, 0, 32, data);
+
+ return adi_jtag_ap_write_check(dap, reg, out_value_buf);
+}
+
+static int jtag_ap_q_abort(struct swjdp_common *dap, uint8_t *ack)
+{
+ /* for JTAG, this is the only valid ABORT register operation */
+ return adi_jtag_dp_scan_u32(dap, JTAG_DP_ABORT,
+ 0, DPAP_WRITE, 1, NULL, ack);
+}
+
+static int jtag_dp_run(struct swjdp_common *dap)
+{
+ return jtagdp_transaction_endcheck(dap);
+}
+
+static const struct dap_ops jtag_dp_ops = {
+ .queue_idcode_read = jtag_idcode_q_read,
+ .queue_dp_read = jtag_dp_q_read,
+ .queue_dp_write = jtag_dp_q_write,
+ .queue_ap_read = jtag_ap_q_read,
+ .queue_ap_write = jtag_ap_q_write,
+ .queue_ap_abort = jtag_ap_q_abort,
+ .run = jtag_dp_run,
+};
+
+/*--------------------------------------------------------------------------*/
+
/**
* Initialize a DAP. This sets up the power domains, prepares the DP
* for further use, and arranges to use AP #0 for all AP operations
LOG_DEBUG(" ");
+ /* JTAG-DP or SWJ-DP, in JTAG mode */
+ swjdp->ops = &jtag_dp_ops;
+
/* Default MEM-AP setup.
*
* REVISIT AP #0 may be an inappropriate default for this.
dap_ap_select(swjdp, 0);
/* DP initialization */
- dap_dp_read_reg(swjdp, &dummy, DP_CTRL_STAT);
- dap_dp_write_reg(swjdp, SSTICKYERR, DP_CTRL_STAT);
- dap_dp_read_reg(swjdp, &dummy, DP_CTRL_STAT);
+
+ retval = dap_queue_dp_read(swjdp, DP_CTRL_STAT, &dummy);
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = dap_queue_dp_write(swjdp, DP_CTRL_STAT, SSTICKYERR);
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = dap_queue_dp_read(swjdp, DP_CTRL_STAT, &dummy);
+ if (retval != ERROR_OK)
+ return retval;
swjdp->dp_ctrl_stat = CDBGPWRUPREQ | CSYSPWRUPREQ;
+ retval = dap_queue_dp_write(swjdp, DP_CTRL_STAT, swjdp->dp_ctrl_stat);
+ if (retval != ERROR_OK)
+ return retval;
- dap_dp_write_reg(swjdp, swjdp->dp_ctrl_stat, DP_CTRL_STAT);
- dap_dp_read_reg(swjdp, &ctrlstat, DP_CTRL_STAT);
- if ((retval = jtag_execute_queue()) != ERROR_OK)
+ retval = dap_queue_dp_read(swjdp, DP_CTRL_STAT, &ctrlstat);
+ if (retval != ERROR_OK)
+ return retval;
+ if ((retval = dap_run(swjdp)) != ERROR_OK)
return retval;
/* Check that we have debug power domains activated */
while (!(ctrlstat & CDBGPWRUPACK) && (cnt++ < 10))
{
LOG_DEBUG("DAP: wait CDBGPWRUPACK");
- dap_dp_read_reg(swjdp, &ctrlstat, DP_CTRL_STAT);
- if ((retval = jtag_execute_queue()) != ERROR_OK)
+ retval = dap_queue_dp_read(swjdp, DP_CTRL_STAT, &ctrlstat);
+ if (retval != ERROR_OK)
+ return retval;
+ if ((retval = dap_run(swjdp)) != ERROR_OK)
return retval;
alive_sleep(10);
}
while (!(ctrlstat & CSYSPWRUPACK) && (cnt++ < 10))
{
LOG_DEBUG("DAP: wait CSYSPWRUPACK");
- dap_dp_read_reg(swjdp, &ctrlstat, DP_CTRL_STAT);
- if ((retval = jtag_execute_queue()) != ERROR_OK)
+ retval = dap_queue_dp_read(swjdp, DP_CTRL_STAT, &ctrlstat);
+ if (retval != ERROR_OK)
+ return retval;
+ if ((retval = dap_run(swjdp)) != ERROR_OK)
return retval;
alive_sleep(10);
}
- dap_dp_read_reg(swjdp, &dummy, DP_CTRL_STAT);
+ retval = dap_queue_dp_read(swjdp, DP_CTRL_STAT, &dummy);
+ if (retval != ERROR_OK)
+ return retval;
/* With debug power on we can activate OVERRUN checking */
swjdp->dp_ctrl_stat = CDBGPWRUPREQ | CSYSPWRUPREQ | CORUNDETECT;
- dap_dp_write_reg(swjdp, swjdp->dp_ctrl_stat, DP_CTRL_STAT);
- dap_dp_read_reg(swjdp, &dummy, DP_CTRL_STAT);
+ retval = dap_queue_dp_write(swjdp, DP_CTRL_STAT, swjdp->dp_ctrl_stat);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = dap_queue_dp_read(swjdp, DP_CTRL_STAT, &dummy);
+ if (retval != ERROR_OK)
+ return retval;
/*
* REVISIT this isn't actually *initializing* anything in an AP,
* Should it? If the ROM address is valid, is this the right
* place to scan the table and do any topology detection?
*/
- dap_ap_read_reg_u32(swjdp, AP_REG_IDR, &idreg);
- dap_ap_read_reg_u32(swjdp, AP_REG_BASE, &romaddr);
+ retval = dap_queue_ap_read(swjdp, AP_REG_IDR, &idreg);
+ retval = dap_queue_ap_read(swjdp, AP_REG_BASE, &romaddr);
LOG_DEBUG("MEM-AP #%d ID Register 0x%" PRIx32
", Debug ROM Address 0x%" PRIx32,
int dap_info_command(struct command_context *cmd_ctx,
struct swjdp_common *swjdp, int apsel)
{
-
+ int retval;
uint32_t dbgbase, apid;
int romtable_present = 0;
uint8_t mem_ap;
apselold = swjdp->apsel;
dap_ap_select(swjdp, apsel);
- dap_ap_read_reg_u32(swjdp, AP_REG_BASE, &dbgbase);
- dap_ap_read_reg_u32(swjdp, AP_REG_IDR, &apid);
- jtagdp_transaction_endcheck(swjdp);
+ retval = dap_queue_ap_read(swjdp, AP_REG_BASE, &dbgbase);
+ retval = dap_queue_ap_read(swjdp, AP_REG_IDR, &apid);
+ retval = dap_run(swjdp);
+ if (retval != ERROR_OK)
+ return retval;
+
/* Now we read ROM table ID registers, ref. ARM IHI 0029B sec */
mem_ap = ((apid&0x10000) && ((apid&0x0F) != 0));
command_print(cmd_ctx, "AP ID register 0x%8.8" PRIx32, apid);
mem_ap_read_u32(swjdp, (dbgbase&0xFFFFF000) | 0xFF8, &cid2);
mem_ap_read_u32(swjdp, (dbgbase&0xFFFFF000) | 0xFFC, &cid3);
mem_ap_read_u32(swjdp, (dbgbase&0xFFFFF000) | 0xFCC, &memtype);
- jtagdp_transaction_endcheck(swjdp);
+ retval = dap_run(swjdp);
+ if (retval != ERROR_OK)
+ return retval;
+
if (!is_dap_cid_ok(cid3, cid2, cid1, cid0))
command_print(cmd_ctx, "\tCID3 0x%2.2" PRIx32
", CID2 0x%2.2" PRIx32
* though they're not common for now. This should
* use the ID register to verify it's a MEM-AP.
*/
- dap_ap_read_reg_u32(swjdp, AP_REG_BASE, &baseaddr);
- retval = jtagdp_transaction_endcheck(swjdp);
+ retval = dap_queue_ap_read(swjdp, AP_REG_BASE, &baseaddr);
+ retval = dap_run(swjdp);
+ if (retval != ERROR_OK)
+ return retval;
+
command_print(CMD_CTX, "0x%8.8" PRIx32, baseaddr);
if (apselsave != apsel)
}
dap_ap_select(swjdp, apsel);
- dap_ap_read_reg_u32(swjdp, AP_REG_IDR, &apid);
- retval = jtagdp_transaction_endcheck(swjdp);
+ retval = dap_queue_ap_read(swjdp, AP_REG_IDR, &apid);
+ retval = dap_run(swjdp);
+ if (retval != ERROR_OK)
+ return retval;
+
command_print(CMD_CTX, "ap %" PRIi32 " selected, identification register 0x%8.8" PRIx32,
apsel, apid);
if (apselsave != apsel)
dap_ap_select(swjdp, apsel);
- dap_ap_read_reg_u32(swjdp, AP_REG_IDR, &apid);
- retval = jtagdp_transaction_endcheck(swjdp);
+ retval = dap_queue_ap_read(swjdp, AP_REG_IDR, &apid);
+ retval = dap_run(swjdp);
+ if (retval != ERROR_OK)
+ return retval;
+
command_print(CMD_CTX, "0x%8.8" PRIx32, apid);
if (apselsave != apsel)
dap_ap_select(swjdp, apselsave);
projects / fw / openocd / blobdiff