target: use proper format with uint32_t

[fw/openocd] / src / target / arm_adi_v5.c

diff --git a/src/target/arm_adi_v5.c b/src/target/arm_adi_v5.c
index 11bf185496233a16324b469d9aa1a803b9b41fe8..a09e2698a78eb8fc0de3e51990c4e2f431562193 100644 (file)
--- a/src/target/arm_adi_v5.c
+++ b/src/target/arm_adi_v5.c
@@ -51,7 +51,7 @@
  * is set in the DP_CTRL_STAT register, the SSTICKYORUN status is set and
  * further AP operations will fail.  There are two basic methods to avoid
  * such overrun errors.  One involves polling for status instead of using
- * transaction piplining.  The other involves adding delays to ensure the
+ * transaction pipelining.  The other involves adding delays to ensure the
  * AP has enough time to complete one operation before starting the next
  * one.  (For JTAG these delays are controlled by memaccess_tck.)
  */
@@ -872,7 +872,7 @@ int dap_find_ap(struct adiv5_dap *dap, enum ap_type type_to_find, struct adiv5_a
                 *  3-0  : AP Type (0=JTAG-AP 1=AHB-AP 2=APB-AP 4=AXI-AP)
                 */
 
-               /* Reading register for a non-existant AP should not cause an error,
+               /* Reading register for a non-existent AP should not cause an error,
                 * but just to be sure, try to continue searching if an error does happen.
                 */
                if ((retval == ERROR_OK) &&                  /* Register read success */
@@ -1682,7 +1682,7 @@ COMMAND_HANDLER(dap_memaccess_command)
        }
        dap->ap[dap->apsel].memaccess_tck = memaccess_tck;
 
-       command_print(CMD, "memory bus access delay set to %" PRIi32 " tck",
+       command_print(CMD, "memory bus access delay set to %" PRIu32 " tck",
                        dap->ap[dap->apsel].memaccess_tck);
 
        return ERROR_OK;
@@ -1695,7 +1695,7 @@ COMMAND_HANDLER(dap_apsel_command)
 
        switch (CMD_ARGC) {
        case 0:
-               command_print(CMD, "%" PRIi32, dap->apsel);
+               command_print(CMD, "%" PRIu32, dap->apsel);
                return ERROR_OK;
        case 1:
                COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], apsel);
@@ -1721,7 +1721,7 @@ COMMAND_HANDLER(dap_apcsw_command)
 
        switch (CMD_ARGC) {
        case 0:
-               command_print(CMD, "ap %" PRIi32 " selected, csw 0x%8.8" PRIx32,
+               command_print(CMD, "ap %" PRIu32 " selected, csw 0x%8.8" PRIx32,
                        dap->apsel, apcsw);
                return ERROR_OK;
        case 1: