+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
/***************************************************************************
* Copyright (C) 2006 by Magnus Lundin *
* lundin@mlu.mine.nu *
* *
* Copyright (C) 2009-2010 by David Brownell *
* *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
+ * Copyright (C) 2013 by Andreas Fritiofson *
+ * andreas.fritiofson@gmail.com *
* *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ * Copyright (C) 2019-2021, Ampere Computing LLC *
***************************************************************************/
/**
* This file implements support for the ARM Debug Interface version 5 (ADIv5)
* debugging architecture. Compared with previous versions, this includes
* a low pin-count Serial Wire Debug (SWD) alternative to JTAG for message
- * transport, and focusses on memory mapped resources as defined by the
+ * transport, and focuses on memory mapped resources as defined by the
* CoreSight architecture.
*
* A key concept in ADIv5 is the Debug Access Port, or DAP. A DAP has two
* is set in the DP_CTRL_STAT register, the SSTICKYORUN status is set and
* further AP operations will fail. There are two basic methods to avoid
* such overrun errors. One involves polling for status instead of using
- * transaction piplining. The other involves adding delays to ensure the
+ * transaction pipelining. The other involves adding delays to ensure the
* AP has enough time to complete one operation before starting the next
* one. (For JTAG these delays are controlled by memaccess_tck.)
*/
/*
* Relevant specifications from ARM include:
*
- * ARM(tm) Debug Interface v5 Architecture Specification ARM IHI 0031A
+ * ARM(tm) Debug Interface v5 Architecture Specification ARM IHI 0031E
* CoreSight(tm) v1.0 Architecture Specification ARM IHI 0029B
*
* CoreSight(tm) DAP-Lite TRM, ARM DDI 0316D
#include "config.h"
#endif
+#include "jtag/interface.h"
#include "arm.h"
#include "arm_adi_v5.h"
+#include "arm_coresight.h"
+#include "jtag/swd.h"
+#include "transport/transport.h"
+#include <helper/align.h>
+#include <helper/jep106.h>
#include <helper/time_support.h>
-
+#include <helper/list.h>
+#include <helper/jim-nvp.h>
/* ARM ADI Specification requires at least 10 bits used for TAR autoincrement */
uint32_t tar_block_size(uint32_t address)
Return the largest block starting at address that does not cross a tar block size alignment boundary
*/
-static uint32_t max_tar_block_size(uint32_t tar_autoincr_block, uint32_t address)
+static uint32_t max_tar_block_size(uint32_t tar_autoincr_block, target_addr_t address)
{
- return (tar_autoincr_block - ((tar_autoincr_block - 1) & address)) >> 2;
+ return tar_autoincr_block - ((tar_autoincr_block - 1) & address);
}
/***************************************************************************
* *
***************************************************************************/
-/**
- * Select one of the APs connected to the specified DAP. The
- * selection is implicitly used with future AP transactions.
- * This is a NOP if the specified AP is already selected.
- *
- * @param dap The DAP
- * @param apsel Number of the AP to (implicitly) use with further
- * transactions. This normally identifies a MEM-AP.
- */
-void dap_ap_select(struct adiv5_dap *dap,uint8_t ap)
+static int mem_ap_setup_csw(struct adiv5_ap *ap, uint32_t csw)
{
- uint32_t new_ap = (ap << 24) & 0xFF000000;
+ csw |= ap->csw_default;
- if (new_ap != dap->ap_current)
- {
- dap->ap_current = new_ap;
- /* Switching AP invalidates cached values.
- * Values MUST BE UPDATED BEFORE AP ACCESS.
- */
- dap->ap_bank_value = -1;
- dap->ap_csw_value = -1;
- dap->ap_tar_value = -1;
+ if (csw != ap->csw_value) {
+ /* LOG_DEBUG("DAP: Set CSW %x",csw); */
+ int retval = dap_queue_ap_write(ap, MEM_AP_REG_CSW(ap->dap), csw);
+ if (retval != ERROR_OK) {
+ ap->csw_value = 0;
+ return retval;
+ }
+ ap->csw_value = csw;
+ }
+ return ERROR_OK;
+}
+
+static int mem_ap_setup_tar(struct adiv5_ap *ap, target_addr_t tar)
+{
+ if (!ap->tar_valid || tar != ap->tar_value) {
+ /* LOG_DEBUG("DAP: Set TAR %x",tar); */
+ int retval = dap_queue_ap_write(ap, MEM_AP_REG_TAR(ap->dap), (uint32_t)(tar & 0xffffffffUL));
+ if (retval == ERROR_OK && is_64bit_ap(ap)) {
+ /* See if bits 63:32 of tar is different from last setting */
+ if ((ap->tar_value >> 32) != (tar >> 32))
+ retval = dap_queue_ap_write(ap, MEM_AP_REG_TAR64(ap->dap), (uint32_t)(tar >> 32));
+ }
+ if (retval != ERROR_OK) {
+ ap->tar_valid = false;
+ return retval;
+ }
+ ap->tar_value = tar;
+ ap->tar_valid = true;
+ }
+ return ERROR_OK;
+}
+
+static int mem_ap_read_tar(struct adiv5_ap *ap, target_addr_t *tar)
+{
+ uint32_t lower;
+ uint32_t upper = 0;
+
+ int retval = dap_queue_ap_read(ap, MEM_AP_REG_TAR(ap->dap), &lower);
+ if (retval == ERROR_OK && is_64bit_ap(ap))
+ retval = dap_queue_ap_read(ap, MEM_AP_REG_TAR64(ap->dap), &upper);
+
+ if (retval != ERROR_OK) {
+ ap->tar_valid = false;
+ return retval;
+ }
+
+ retval = dap_run(ap->dap);
+ if (retval != ERROR_OK) {
+ ap->tar_valid = false;
+ return retval;
+ }
+
+ *tar = (((target_addr_t)upper) << 32) | (target_addr_t)lower;
+
+ ap->tar_value = *tar;
+ ap->tar_valid = true;
+ return ERROR_OK;
+}
+
+static uint32_t mem_ap_get_tar_increment(struct adiv5_ap *ap)
+{
+ switch (ap->csw_value & CSW_ADDRINC_MASK) {
+ case CSW_ADDRINC_SINGLE:
+ switch (ap->csw_value & CSW_SIZE_MASK) {
+ case CSW_8BIT:
+ return 1;
+ case CSW_16BIT:
+ return 2;
+ case CSW_32BIT:
+ return 4;
+ default:
+ return 0;
+ }
+ case CSW_ADDRINC_PACKED:
+ return 4;
}
+ return 0;
+}
+
+/* mem_ap_update_tar_cache is called after an access to MEM_AP_REG_DRW
+ */
+static void mem_ap_update_tar_cache(struct adiv5_ap *ap)
+{
+ if (!ap->tar_valid)
+ return;
+
+ uint32_t inc = mem_ap_get_tar_increment(ap);
+ if (inc >= max_tar_block_size(ap->tar_autoincr_block, ap->tar_value))
+ ap->tar_valid = false;
+ else
+ ap->tar_value += inc;
}
/**
* Queue transactions setting up transfer parameters for the
* currently selected MEM-AP.
*
- * Subsequent transfers using registers like AP_REG_DRW or AP_REG_BD2
+ * Subsequent transfers using registers like MEM_AP_REG_DRW or MEM_AP_REG_BD2
* initiate data reads or writes using memory or peripheral addresses.
* If the CSW is configured for it, the TAR may be automatically
* incremented after each transfer.
*
- * @todo Rename to reflect it being specifically a MEM-AP function.
- *
- * @param dap The DAP connected to the MEM-AP.
+ * @param ap The MEM-AP.
* @param csw MEM-AP Control/Status Word (CSW) register to assign. If this
* matches the cached value, the register is not changed.
* @param tar MEM-AP Transfer Address Register (TAR) to assign. If this
*
* @return ERROR_OK if the transaction was properly queued, else a fault code.
*/
-int dap_setup_accessport(struct adiv5_dap *dap, uint32_t csw, uint32_t tar)
+static int mem_ap_setup_transfer(struct adiv5_ap *ap, uint32_t csw, target_addr_t tar)
{
int retval;
-
- csw = csw | CSW_DBGSWENABLE | CSW_MASTER_DEBUG | CSW_HPROT;
- if (csw != dap->ap_csw_value)
- {
- /* LOG_DEBUG("DAP: Set CSW %x",csw); */
- retval = dap_queue_ap_write(dap, AP_REG_CSW, csw);
- if (retval != ERROR_OK)
- return retval;
- dap->ap_csw_value = csw;
- }
- if (tar != dap->ap_tar_value)
- {
- /* LOG_DEBUG("DAP: Set TAR %x",tar); */
- retval = dap_queue_ap_write(dap, AP_REG_TAR, tar);
- if (retval != ERROR_OK)
- return retval;
- dap->ap_tar_value = tar;
- }
- /* Disable TAR cache when autoincrementing */
- if (csw & CSW_ADDRINC_MASK)
- dap->ap_tar_value = -1;
+ retval = mem_ap_setup_csw(ap, csw);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = mem_ap_setup_tar(ap, tar);
+ if (retval != ERROR_OK)
+ return retval;
return ERROR_OK;
}
/**
* Asynchronous (queued) read of a word from memory or a system register.
*
- * @param dap The DAP connected to the MEM-AP performing the read.
+ * @param ap The MEM-AP to access.
* @param address Address of the 32-bit word to read; it must be
* readable by the currently selected MEM-AP.
* @param value points to where the word will be stored when the
*
* @return ERROR_OK for success. Otherwise a fault code.
*/
-int mem_ap_read_u32(struct adiv5_dap *dap, uint32_t address,
+int mem_ap_read_u32(struct adiv5_ap *ap, target_addr_t address,
uint32_t *value)
{
int retval;
/* Use banked addressing (REG_BDx) to avoid some link traffic
* (updating TAR) when reading several consecutive addresses.
*/
- retval = dap_setup_accessport(dap, CSW_32BIT | CSW_ADDRINC_OFF,
- address & 0xFFFFFFF0);
+ retval = mem_ap_setup_transfer(ap,
+ CSW_32BIT | (ap->csw_value & CSW_ADDRINC_MASK),
+ address & 0xFFFFFFFFFFFFFFF0ull);
if (retval != ERROR_OK)
return retval;
- return dap_queue_ap_read(dap, AP_REG_BD0 | (address & 0xC), value);
+ return dap_queue_ap_read(ap, MEM_AP_REG_BD0(ap->dap) | (address & 0xC), value);
}
/**
* Synchronous read of a word from memory or a system register.
* As a side effect, this flushes any queued transactions.
*
- * @param dap The DAP connected to the MEM-AP performing the read.
+ * @param ap The MEM-AP to access.
* @param address Address of the 32-bit word to read; it must be
* readable by the currently selected MEM-AP.
* @param value points to where the result will be stored.
* @return ERROR_OK for success; *value holds the result.
* Otherwise a fault code.
*/
-int mem_ap_read_atomic_u32(struct adiv5_dap *dap, uint32_t address,
+int mem_ap_read_atomic_u32(struct adiv5_ap *ap, target_addr_t address,
uint32_t *value)
{
int retval;
- retval = mem_ap_read_u32(dap, address, value);
+ retval = mem_ap_read_u32(ap, address, value);
if (retval != ERROR_OK)
return retval;
- return dap_run(dap);
+ return dap_run(ap->dap);
}
/**
* Asynchronous (queued) write of a word to memory or a system register.
*
- * @param dap The DAP connected to the MEM-AP.
+ * @param ap The MEM-AP to access.
* @param address Address to be written; it must be writable by
* the currently selected MEM-AP.
* @param value Word that will be written to the address when transaction
*
* @return ERROR_OK for success. Otherwise a fault code.
*/
-int mem_ap_write_u32(struct adiv5_dap *dap, uint32_t address,
+int mem_ap_write_u32(struct adiv5_ap *ap, target_addr_t address,
uint32_t value)
{
int retval;
/* Use banked addressing (REG_BDx) to avoid some link traffic
* (updating TAR) when writing several consecutive addresses.
*/
- retval = dap_setup_accessport(dap, CSW_32BIT | CSW_ADDRINC_OFF,
- address & 0xFFFFFFF0);
+ retval = mem_ap_setup_transfer(ap,
+ CSW_32BIT | (ap->csw_value & CSW_ADDRINC_MASK),
+ address & 0xFFFFFFFFFFFFFFF0ull);
if (retval != ERROR_OK)
return retval;
- return dap_queue_ap_write(dap, AP_REG_BD0 | (address & 0xC),
+ return dap_queue_ap_write(ap, MEM_AP_REG_BD0(ap->dap) | (address & 0xC),
value);
}
* Synchronous write of a word to memory or a system register.
* As a side effect, this flushes any queued transactions.
*
- * @param dap The DAP connected to the MEM-AP.
+ * @param ap The MEM-AP to access.
* @param address Address to be written; it must be writable by
* the currently selected MEM-AP.
* @param value Word that will be written.
*
* @return ERROR_OK for success; the data was written. Otherwise a fault code.
*/
-int mem_ap_write_atomic_u32(struct adiv5_dap *dap, uint32_t address,
+int mem_ap_write_atomic_u32(struct adiv5_ap *ap, target_addr_t address,
uint32_t value)
{
- int retval = mem_ap_write_u32(dap, address, value);
+ int retval = mem_ap_write_u32(ap, address, value);
if (retval != ERROR_OK)
return retval;
- return dap_run(dap);
+ return dap_run(ap->dap);
}
-/*****************************************************************************
-* *
-* mem_ap_write_buf(struct adiv5_dap *dap, uint8_t *buffer, int count, uint32_t address) *
-* *
-* Write a buffer in target order (little endian) *
-* *
-*****************************************************************************/
-int mem_ap_write_buf_u32(struct adiv5_dap *dap, const uint8_t *buffer, int count, uint32_t address)
+/**
+ * Synchronous write of a block of memory, using a specific access size.
+ *
+ * @param ap The MEM-AP to access.
+ * @param buffer The data buffer to write. No particular alignment is assumed.
+ * @param size Which access size to use, in bytes. 1, 2 or 4.
+ * @param count The number of writes to do (in size units, not bytes).
+ * @param address Address to be written; it must be writable by the currently selected MEM-AP.
+ * @param addrinc Whether the target address should be increased for each write or not. This
+ * should normally be true, except when writing to e.g. a FIFO.
+ * @return ERROR_OK on success, otherwise an error code.
+ */
+static int mem_ap_write(struct adiv5_ap *ap, const uint8_t *buffer, uint32_t size, uint32_t count,
+ target_addr_t address, bool addrinc)
{
- int wcount, blocksize, writecount, errorcount = 0, retval = ERROR_OK;
- uint32_t adr = address;
- const uint8_t* pBuffer = buffer;
-
- count >>= 2;
- wcount = count;
+ struct adiv5_dap *dap = ap->dap;
+ size_t nbytes = size * count;
+ const uint32_t csw_addrincr = addrinc ? CSW_ADDRINC_SINGLE : CSW_ADDRINC_OFF;
+ uint32_t csw_size;
+ target_addr_t addr_xor;
+ int retval = ERROR_OK;
- /* if we have an unaligned access - reorder data */
- if (adr & 0x3u)
- {
- for (writecount = 0; writecount < count; writecount++)
- {
- int i;
- uint32_t outvalue;
- memcpy(&outvalue, pBuffer, sizeof(uint32_t));
-
- for (i = 0; i < 4; i++)
- {
- *((uint8_t*)pBuffer + (adr & 0x3)) = outvalue;
- outvalue >>= 8;
- adr++;
- }
- pBuffer += sizeof(uint32_t);
- }
+ /* TI BE-32 Quirks mode:
+ * Writes on big-endian TMS570 behave very strangely. Observed behavior:
+ * size write address bytes written in order
+ * 4 TAR ^ 0 (val >> 24), (val >> 16), (val >> 8), (val)
+ * 2 TAR ^ 2 (val >> 8), (val)
+ * 1 TAR ^ 3 (val)
+ * For example, if you attempt to write a single byte to address 0, the processor
+ * will actually write a byte to address 3.
+ *
+ * To make writes of size < 4 work as expected, we xor a value with the address before
+ * setting the TAP, and we set the TAP after every transfer rather then relying on
+ * address increment. */
+
+ if (size == 4) {
+ csw_size = CSW_32BIT;
+ addr_xor = 0;
+ } else if (size == 2) {
+ csw_size = CSW_16BIT;
+ addr_xor = dap->ti_be_32_quirks ? 2 : 0;
+ } else if (size == 1) {
+ csw_size = CSW_8BIT;
+ addr_xor = dap->ti_be_32_quirks ? 3 : 0;
+ } else {
+ return ERROR_TARGET_UNALIGNED_ACCESS;
}
- while (wcount > 0)
- {
- /* Adjust to write blocks within boundaries aligned to the TAR autoincremnent size*/
- blocksize = max_tar_block_size(dap->tar_autoincr_block, address);
- if (wcount < blocksize)
- blocksize = wcount;
-
- /* handle unaligned data at 4k boundary */
- if (blocksize == 0)
- blocksize = 1;
+ if (ap->unaligned_access_bad && (address % size != 0))
+ return ERROR_TARGET_UNALIGNED_ACCESS;
- retval = dap_setup_accessport(dap, CSW_32BIT | CSW_ADDRINC_SINGLE, address);
- if (retval != ERROR_OK)
- return retval;
+ while (nbytes > 0) {
+ uint32_t this_size = size;
- for (writecount = 0; writecount < blocksize; writecount++)
- {
- retval = dap_queue_ap_write(dap, AP_REG_DRW,
- *(uint32_t *) ((void *) (buffer + 4 * writecount)));
- if (retval != ERROR_OK)
- break;
+ /* Select packed transfer if possible */
+ if (addrinc && ap->packed_transfers && nbytes >= 4
+ && max_tar_block_size(ap->tar_autoincr_block, address) >= 4) {
+ this_size = 4;
+ retval = mem_ap_setup_csw(ap, csw_size | CSW_ADDRINC_PACKED);
+ } else {
+ retval = mem_ap_setup_csw(ap, csw_size | csw_addrincr);
}
- if ((retval = dap_run(dap)) == ERROR_OK)
- {
- wcount = wcount - blocksize;
- address = address + 4 * blocksize;
- buffer = buffer + 4 * blocksize;
- }
- else
- {
- errorcount++;
- }
+ if (retval != ERROR_OK)
+ break;
- if (errorcount > 1)
- {
- LOG_WARNING("Block write error address 0x%" PRIx32 ", wcount 0x%x", address, wcount);
+ retval = mem_ap_setup_tar(ap, address ^ addr_xor);
+ if (retval != ERROR_OK)
return retval;
- }
- }
-
- return retval;
-}
-
-static int mem_ap_write_buf_packed_u16(struct adiv5_dap *dap,
- const uint8_t *buffer, int count, uint32_t address)
-{
- int retval = ERROR_OK;
- int wcount, blocksize, writecount, i;
-
- wcount = count >> 1;
-
- while (wcount > 0)
- {
- int nbytes;
- /* Adjust to write blocks within boundaries aligned to the TAR autoincremnent size*/
- blocksize = max_tar_block_size(dap->tar_autoincr_block, address);
-
- if (wcount < blocksize)
- blocksize = wcount;
+ /* How many source bytes each transfer will consume, and their location in the DRW,
+ * depends on the type of transfer and alignment. See ARM document IHI0031C. */
+ uint32_t outvalue = 0;
+ uint32_t drw_byte_idx = address;
+ if (dap->ti_be_32_quirks) {
+ switch (this_size) {
+ case 4:
+ outvalue |= (uint32_t)*buffer++ << 8 * (3 ^ (drw_byte_idx++ & 3) ^ addr_xor);
+ outvalue |= (uint32_t)*buffer++ << 8 * (3 ^ (drw_byte_idx++ & 3) ^ addr_xor);
+ outvalue |= (uint32_t)*buffer++ << 8 * (3 ^ (drw_byte_idx++ & 3) ^ addr_xor);
+ outvalue |= (uint32_t)*buffer++ << 8 * (3 ^ (drw_byte_idx & 3) ^ addr_xor);
+ break;
+ case 2:
+ outvalue |= (uint32_t)*buffer++ << 8 * (1 ^ (drw_byte_idx++ & 3) ^ addr_xor);
+ outvalue |= (uint32_t)*buffer++ << 8 * (1 ^ (drw_byte_idx & 3) ^ addr_xor);
+ break;
+ case 1:
+ outvalue |= (uint32_t)*buffer++ << 8 * (0 ^ (drw_byte_idx & 3) ^ addr_xor);
+ break;
+ }
+ } else {
+ switch (this_size) {
+ case 4:
+ outvalue |= (uint32_t)*buffer++ << 8 * (drw_byte_idx++ & 3);
+ outvalue |= (uint32_t)*buffer++ << 8 * (drw_byte_idx++ & 3);
+ /* fallthrough */
+ case 2:
+ outvalue |= (uint32_t)*buffer++ << 8 * (drw_byte_idx++ & 3);
+ /* fallthrough */
+ case 1:
+ outvalue |= (uint32_t)*buffer++ << 8 * (drw_byte_idx & 3);
+ }
+ }
- /* handle unaligned data at 4k boundary */
- if (blocksize == 0)
- blocksize = 1;
+ nbytes -= this_size;
- retval = dap_setup_accessport(dap, CSW_16BIT | CSW_ADDRINC_PACKED, address);
+ retval = dap_queue_ap_write(ap, MEM_AP_REG_DRW(dap), outvalue);
if (retval != ERROR_OK)
- return retval;
- writecount = blocksize;
-
- do
- {
- nbytes = MIN((writecount << 1), 4);
-
- if (nbytes < 4)
- {
- retval = mem_ap_write_buf_u16(dap, buffer,
- nbytes, address);
- if (retval != ERROR_OK)
- {
- LOG_WARNING("Block write error address "
- "0x%" PRIx32 ", count 0x%x",
- address, count);
- return retval;
- }
-
- address += nbytes >> 1;
- }
- else
- {
- uint32_t outvalue;
- memcpy(&outvalue, buffer, sizeof(uint32_t));
-
- for (i = 0; i < nbytes; i++)
- {
- *((uint8_t*)buffer + (address & 0x3)) = outvalue;
- outvalue >>= 8;
- address++;
- }
-
- memcpy(&outvalue, buffer, sizeof(uint32_t));
- retval = dap_queue_ap_write(dap,
- AP_REG_DRW, outvalue);
- if (retval != ERROR_OK)
- break;
-
- if ((retval = dap_run(dap)) != ERROR_OK)
- {
- LOG_WARNING("Block write error address "
- "0x%" PRIx32 ", count 0x%x",
- address, count);
- return retval;
- }
- }
+ break;
- buffer += nbytes >> 1;
- writecount -= nbytes >> 1;
+ mem_ap_update_tar_cache(ap);
+ if (addrinc)
+ address += this_size;
+ }
+
+ /* REVISIT: Might want to have a queued version of this function that does not run. */
+ if (retval == ERROR_OK)
+ retval = dap_run(dap);
- } while (writecount);
- wcount -= blocksize;
+ if (retval != ERROR_OK) {
+ target_addr_t tar;
+ if (mem_ap_read_tar(ap, &tar) == ERROR_OK)
+ LOG_ERROR("Failed to write memory at " TARGET_ADDR_FMT, tar);
+ else
+ LOG_ERROR("Failed to write memory and, additionally, failed to find out where");
}
return retval;
}
-int mem_ap_write_buf_u16(struct adiv5_dap *dap, const uint8_t *buffer, int count, uint32_t address)
+/**
+ * Synchronous read of a block of memory, using a specific access size.
+ *
+ * @param ap The MEM-AP to access.
+ * @param buffer The data buffer to receive the data. No particular alignment is assumed.
+ * @param size Which access size to use, in bytes. 1, 2 or 4.
+ * @param count The number of reads to do (in size units, not bytes).
+ * @param adr Address to be read; it must be readable by the currently selected MEM-AP.
+ * @param addrinc Whether the target address should be increased after each read or not. This
+ * should normally be true, except when reading from e.g. a FIFO.
+ * @return ERROR_OK on success, otherwise an error code.
+ */
+static int mem_ap_read(struct adiv5_ap *ap, uint8_t *buffer, uint32_t size, uint32_t count,
+ target_addr_t adr, bool addrinc)
{
+ struct adiv5_dap *dap = ap->dap;
+ size_t nbytes = size * count;
+ const uint32_t csw_addrincr = addrinc ? CSW_ADDRINC_SINGLE : CSW_ADDRINC_OFF;
+ uint32_t csw_size;
+ target_addr_t address = adr;
int retval = ERROR_OK;
- if (count >= 4)
- return mem_ap_write_buf_packed_u16(dap, buffer, count, address);
+ /* TI BE-32 Quirks mode:
+ * Reads on big-endian TMS570 behave strangely differently than writes.
+ * They read from the physical address requested, but with DRW byte-reversed.
+ * For example, a byte read from address 0 will place the result in the high bytes of DRW.
+ * Also, packed 8-bit and 16-bit transfers seem to sometimes return garbage in some bytes,
+ * so avoid them. */
+
+ if (size == 4)
+ csw_size = CSW_32BIT;
+ else if (size == 2)
+ csw_size = CSW_16BIT;
+ else if (size == 1)
+ csw_size = CSW_8BIT;
+ else
+ return ERROR_TARGET_UNALIGNED_ACCESS;
+
+ if (ap->unaligned_access_bad && (adr % size != 0))
+ return ERROR_TARGET_UNALIGNED_ACCESS;
+
+ /* Allocate buffer to hold the sequence of DRW reads that will be made. This is a significant
+ * over-allocation if packed transfers are going to be used, but determining the real need at
+ * this point would be messy. */
+ uint32_t *read_buf = calloc(count, sizeof(uint32_t));
+ /* Multiplication count * sizeof(uint32_t) may overflow, calloc() is safe */
+ uint32_t *read_ptr = read_buf;
+ if (!read_buf) {
+ LOG_ERROR("Failed to allocate read buffer");
+ return ERROR_FAIL;
+ }
- while (count > 0)
- {
- retval = dap_setup_accessport(dap, CSW_16BIT | CSW_ADDRINC_SINGLE, address);
- if (retval != ERROR_OK)
- return retval;
- uint16_t svalue;
- memcpy(&svalue, buffer, sizeof(uint16_t));
- uint32_t outvalue = (uint32_t)svalue << 8 * (address & 0x3);
- retval = dap_queue_ap_write(dap, AP_REG_DRW, outvalue);
+ /* Queue up all reads. Each read will store the entire DRW word in the read buffer. How many
+ * useful bytes it contains, and their location in the word, depends on the type of transfer
+ * and alignment. */
+ while (nbytes > 0) {
+ uint32_t this_size = size;
+
+ /* Select packed transfer if possible */
+ if (addrinc && ap->packed_transfers && nbytes >= 4
+ && max_tar_block_size(ap->tar_autoincr_block, address) >= 4) {
+ this_size = 4;
+ retval = mem_ap_setup_csw(ap, csw_size | CSW_ADDRINC_PACKED);
+ } else {
+ retval = mem_ap_setup_csw(ap, csw_size | csw_addrincr);
+ }
if (retval != ERROR_OK)
break;
- retval = dap_run(dap);
+ retval = mem_ap_setup_tar(ap, address);
if (retval != ERROR_OK)
break;
- count -= 2;
- address += 2;
- buffer += 2;
- }
+ retval = dap_queue_ap_read(ap, MEM_AP_REG_DRW(dap), read_ptr++);
+ if (retval != ERROR_OK)
+ break;
- return retval;
-}
+ nbytes -= this_size;
+ if (addrinc)
+ address += this_size;
-static int mem_ap_write_buf_packed_u8(struct adiv5_dap *dap,
- const uint8_t *buffer, int count, uint32_t address)
-{
- int retval = ERROR_OK;
- int wcount, blocksize, writecount, i;
+ mem_ap_update_tar_cache(ap);
+ }
- wcount = count;
+ if (retval == ERROR_OK)
+ retval = dap_run(dap);
- while (wcount > 0)
- {
- int nbytes;
+ /* Restore state */
+ address = adr;
+ nbytes = size * count;
+ read_ptr = read_buf;
+
+ /* If something failed, read TAR to find out how much data was successfully read, so we can
+ * at least give the caller what we have. */
+ if (retval != ERROR_OK) {
+ target_addr_t tar;
+ if (mem_ap_read_tar(ap, &tar) == ERROR_OK) {
+ /* TAR is incremented after failed transfer on some devices (eg Cortex-M4) */
+ LOG_ERROR("Failed to read memory at " TARGET_ADDR_FMT, tar);
+ if (nbytes > tar - address)
+ nbytes = tar - address;
+ } else {
+ LOG_ERROR("Failed to read memory and, additionally, failed to find out where");
+ nbytes = 0;
+ }
+ }
- /* Adjust to write blocks within boundaries aligned to the TAR autoincremnent size*/
- blocksize = max_tar_block_size(dap->tar_autoincr_block, address);
+ /* Replay loop to populate caller's buffer from the correct word and byte lane */
+ while (nbytes > 0) {
+ uint32_t this_size = size;
- if (wcount < blocksize)
- blocksize = wcount;
+ if (addrinc && ap->packed_transfers && nbytes >= 4
+ && max_tar_block_size(ap->tar_autoincr_block, address) >= 4) {
+ this_size = 4;
+ }
- retval = dap_setup_accessport(dap, CSW_8BIT | CSW_ADDRINC_PACKED, address);
- if (retval != ERROR_OK)
- return retval;
- writecount = blocksize;
-
- do
- {
- nbytes = MIN(writecount, 4);
-
- if (nbytes < 4)
- {
- retval = mem_ap_write_buf_u8(dap, buffer, nbytes, address);
- if (retval != ERROR_OK)
- {
- LOG_WARNING("Block write error address "
- "0x%" PRIx32 ", count 0x%x",
- address, count);
- return retval;
- }
-
- address += nbytes;
+ if (dap->ti_be_32_quirks) {
+ switch (this_size) {
+ case 4:
+ *buffer++ = *read_ptr >> 8 * (3 - (address++ & 3));
+ *buffer++ = *read_ptr >> 8 * (3 - (address++ & 3));
+ /* fallthrough */
+ case 2:
+ *buffer++ = *read_ptr >> 8 * (3 - (address++ & 3));
+ /* fallthrough */
+ case 1:
+ *buffer++ = *read_ptr >> 8 * (3 - (address++ & 3));
}
- else
- {
- uint32_t outvalue;
- memcpy(&outvalue, buffer, sizeof(uint32_t));
-
- for (i = 0; i < nbytes; i++)
- {
- *((uint8_t*)buffer + (address & 0x3)) = outvalue;
- outvalue >>= 8;
- address++;
- }
-
- memcpy(&outvalue, buffer, sizeof(uint32_t));
- retval = dap_queue_ap_write(dap,
- AP_REG_DRW, outvalue);
- if (retval != ERROR_OK)
- break;
-
- if ((retval = dap_run(dap)) != ERROR_OK)
- {
- LOG_WARNING("Block write error address "
- "0x%" PRIx32 ", count 0x%x",
- address, count);
- return retval;
- }
+ } else {
+ switch (this_size) {
+ case 4:
+ *buffer++ = *read_ptr >> 8 * (address++ & 3);
+ *buffer++ = *read_ptr >> 8 * (address++ & 3);
+ /* fallthrough */
+ case 2:
+ *buffer++ = *read_ptr >> 8 * (address++ & 3);
+ /* fallthrough */
+ case 1:
+ *buffer++ = *read_ptr >> 8 * (address++ & 3);
}
+ }
- buffer += nbytes;
- writecount -= nbytes;
-
- } while (writecount);
- wcount -= blocksize;
+ read_ptr++;
+ nbytes -= this_size;
}
+ free(read_buf);
return retval;
}
-int mem_ap_write_buf_u8(struct adiv5_dap *dap, const uint8_t *buffer, int count, uint32_t address)
+int mem_ap_read_buf(struct adiv5_ap *ap,
+ uint8_t *buffer, uint32_t size, uint32_t count, target_addr_t address)
{
- int retval = ERROR_OK;
+ return mem_ap_read(ap, buffer, size, count, address, true);
+}
- if (count >= 4)
- return mem_ap_write_buf_packed_u8(dap, buffer, count, address);
+int mem_ap_write_buf(struct adiv5_ap *ap,
+ const uint8_t *buffer, uint32_t size, uint32_t count, target_addr_t address)
+{
+ return mem_ap_write(ap, buffer, size, count, address, true);
+}
- while (count > 0)
- {
- retval = dap_setup_accessport(dap, CSW_8BIT | CSW_ADDRINC_SINGLE, address);
- if (retval != ERROR_OK)
- return retval;
- uint32_t outvalue = (uint32_t)*buffer << 8 * (address & 0x3);
- retval = dap_queue_ap_write(dap, AP_REG_DRW, outvalue);
- if (retval != ERROR_OK)
- break;
+int mem_ap_read_buf_noincr(struct adiv5_ap *ap,
+ uint8_t *buffer, uint32_t size, uint32_t count, target_addr_t address)
+{
+ return mem_ap_read(ap, buffer, size, count, address, false);
+}
- retval = dap_run(dap);
- if (retval != ERROR_OK)
- break;
+int mem_ap_write_buf_noincr(struct adiv5_ap *ap,
+ const uint8_t *buffer, uint32_t size, uint32_t count, target_addr_t address)
+{
+ return mem_ap_write(ap, buffer, size, count, address, false);
+}
- count--;
- address++;
- buffer++;
- }
+/*--------------------------------------------------------------------------*/
- return retval;
-}
-/* FIXME don't import ... this is a temporary workaround for the
- * mem_ap_read_buf_u32() mess, until it's no longer JTAG-specific.
+#define DAP_POWER_DOMAIN_TIMEOUT (10)
+
+/*--------------------------------------------------------------------------*/
+
+/**
+ * Invalidate cached DP select and cached TAR and CSW of all APs
*/
-extern int adi_jtag_dp_scan(struct adiv5_dap *dap,
- uint8_t instr, uint8_t reg_addr, uint8_t RnW,
- uint8_t *outvalue, uint8_t *invalue, uint8_t *ack);
+void dap_invalidate_cache(struct adiv5_dap *dap)
+{
+ dap->select = DP_SELECT_INVALID;
+ dap->last_read = NULL;
+
+ int i;
+ for (i = 0; i <= DP_APSEL_MAX; i++) {
+ /* force csw and tar write on the next mem-ap access */
+ dap->ap[i].tar_valid = false;
+ dap->ap[i].csw_value = 0;
+ }
+}
/**
- * Synchronously read a block of 32-bit words into a buffer
- * @param dap The DAP connected to the MEM-AP.
- * @param buffer where the words will be stored (in host byte order).
- * @param count How many words to read.
- * @param address Memory address from which to read words; all the
- * words must be readable by the currently selected MEM-AP.
+ * Initialize a DAP. This sets up the power domains, prepares the DP
+ * for further use and activates overrun checking.
+ *
+ * @param dap The DAP being initialized.
*/
-int mem_ap_read_buf_u32(struct adiv5_dap *dap, uint8_t *buffer,
- int count, uint32_t address)
+int dap_dp_init(struct adiv5_dap *dap)
{
- int wcount, blocksize, readcount, errorcount = 0, retval = ERROR_OK;
- uint32_t adr = address;
- uint8_t* pBuffer = buffer;
+ int retval;
- count >>= 2;
- wcount = count;
+ LOG_DEBUG("%s", adiv5_dap_name(dap));
- while (wcount > 0)
- {
- /* Adjust to read blocks within boundaries aligned to the
- * TAR autoincrement size (at least 2^10). Autoincrement
- * mode avoids an extra per-word roundtrip to update TAR.
- */
- blocksize = max_tar_block_size(dap->tar_autoincr_block,
- address);
- if (wcount < blocksize)
- blocksize = wcount;
+ dap->do_reconnect = false;
+ dap_invalidate_cache(dap);
- /* handle unaligned data at 4k boundary */
- if (blocksize == 0)
- blocksize = 1;
+ /*
+ * Early initialize dap->dp_ctrl_stat.
+ * In jtag mode only, if the following queue run (in dap_dp_poll_register)
+ * fails and sets the sticky error, it will trigger the clearing
+ * of the sticky. Without this initialization system and debug power
+ * would be disabled while clearing the sticky error bit.
+ */
+ dap->dp_ctrl_stat = CDBGPWRUPREQ | CSYSPWRUPREQ;
- retval = dap_setup_accessport(dap, CSW_32BIT | CSW_ADDRINC_SINGLE,
- address);
- if (retval != ERROR_OK)
- return retval;
+ /*
+ * This write operation clears the sticky error bit in jtag mode only and
+ * is ignored in swd mode. It also powers-up system and debug domains in
+ * both jtag and swd modes, if not done before.
+ */
+ retval = dap_queue_dp_write(dap, DP_CTRL_STAT, dap->dp_ctrl_stat | SSTICKYERR);
+ if (retval != ERROR_OK)
+ return retval;
- /* FIXME remove these three calls to adi_jtag_dp_scan(),
- * so this routine becomes transport-neutral. Be careful
- * not to cause performance problems with JTAG; would it
- * suffice to loop over dap_queue_ap_read(), or would that
- * be slower when JTAG is the chosen transport?
- */
+ retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
+ if (retval != ERROR_OK)
+ return retval;
- /* Scan out first read */
- retval = adi_jtag_dp_scan(dap, JTAG_DP_APACC, AP_REG_DRW,
- DPAP_READ, 0, NULL, NULL);
- if (retval != ERROR_OK)
- return retval;
- for (readcount = 0; readcount < blocksize - 1; readcount++)
- {
- /* Scan out next read; scan in posted value for the
- * previous one. Assumes read is acked "OK/FAULT",
- * and CTRL_STAT says that meant "OK".
- */
- retval = adi_jtag_dp_scan(dap, JTAG_DP_APACC, AP_REG_DRW,
- DPAP_READ, 0, buffer + 4 * readcount,
- &dap->ack);
- if (retval != ERROR_OK)
- return retval;
- }
+ retval = dap_queue_dp_write(dap, DP_CTRL_STAT, dap->dp_ctrl_stat);
+ if (retval != ERROR_OK)
+ return retval;
- /* Scan in last posted value; RDBUFF has no other effect,
- * assuming ack is OK/FAULT and CTRL_STAT says "OK".
- */
- retval = adi_jtag_dp_scan(dap, JTAG_DP_DPACC, DP_RDBUFF,
- DPAP_READ, 0, buffer + 4 * readcount,
- &dap->ack);
- if (retval != ERROR_OK)
- return retval;
+ /* Check that we have debug power domains activated */
+ LOG_DEBUG("DAP: wait CDBGPWRUPACK");
+ retval = dap_dp_poll_register(dap, DP_CTRL_STAT,
+ CDBGPWRUPACK, CDBGPWRUPACK,
+ DAP_POWER_DOMAIN_TIMEOUT);
+ if (retval != ERROR_OK)
+ return retval;
- retval = dap_run(dap);
+ if (!dap->ignore_syspwrupack) {
+ LOG_DEBUG("DAP: wait CSYSPWRUPACK");
+ retval = dap_dp_poll_register(dap, DP_CTRL_STAT,
+ CSYSPWRUPACK, CSYSPWRUPACK,
+ DAP_POWER_DOMAIN_TIMEOUT);
if (retval != ERROR_OK)
- {
- errorcount++;
- if (errorcount <= 1)
- {
- /* try again */
- continue;
- }
- LOG_WARNING("Block read error address 0x%" PRIx32, address);
return retval;
- }
- wcount = wcount - blocksize;
- address += 4 * blocksize;
- buffer += 4 * blocksize;
}
- /* if we have an unaligned access - reorder data */
- if (adr & 0x3u)
- {
- for (readcount = 0; readcount < count; readcount++)
- {
- int i;
- uint32_t data;
- memcpy(&data, pBuffer, sizeof(uint32_t));
-
- for (i = 0; i < 4; i++)
- {
- *((uint8_t*)pBuffer) =
- (data >> 8 * (adr & 0x3));
- pBuffer++;
- adr++;
- }
- }
- }
+ retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
+ if (retval != ERROR_OK)
+ return retval;
+
+ /* With debug power on we can activate OVERRUN checking */
+ dap->dp_ctrl_stat = CDBGPWRUPREQ | CSYSPWRUPREQ | CORUNDETECT;
+ retval = dap_queue_dp_write(dap, DP_CTRL_STAT, dap->dp_ctrl_stat);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = dap_run(dap);
+ if (retval != ERROR_OK)
+ return retval;
return retval;
}
-static int mem_ap_read_buf_packed_u16(struct adiv5_dap *dap,
- uint8_t *buffer, int count, uint32_t address)
+/**
+ * Initialize a DAP or do reconnect if DAP is not accessible.
+ *
+ * @param dap The DAP being initialized.
+ */
+int dap_dp_init_or_reconnect(struct adiv5_dap *dap)
{
- uint32_t invalue;
- int retval = ERROR_OK;
- int wcount, blocksize, readcount, i;
-
- wcount = count >> 1;
-
- while (wcount > 0)
- {
- int nbytes;
-
- /* Adjust to read blocks within boundaries aligned to the TAR autoincremnent size*/
- blocksize = max_tar_block_size(dap->tar_autoincr_block, address);
- if (wcount < blocksize)
- blocksize = wcount;
-
- retval = dap_setup_accessport(dap, CSW_16BIT | CSW_ADDRINC_PACKED, address);
- if (retval != ERROR_OK)
- return retval;
-
- /* handle unaligned data at 4k boundary */
- if (blocksize == 0)
- blocksize = 1;
- readcount = blocksize;
-
- do
- {
- retval = dap_queue_ap_read(dap, AP_REG_DRW, &invalue);
- if (retval != ERROR_OK)
- return retval;
- if ((retval = dap_run(dap)) != ERROR_OK)
- {
- LOG_WARNING("Block read error address 0x%" PRIx32 ", count 0x%x", address, count);
- return retval;
- }
-
- nbytes = MIN((readcount << 1), 4);
+ LOG_DEBUG("%s", adiv5_dap_name(dap));
+
+ /*
+ * Early initialize dap->dp_ctrl_stat.
+ * In jtag mode only, if the following atomic reads fail and set the
+ * sticky error, it will trigger the clearing of the sticky. Without this
+ * initialization system and debug power would be disabled while clearing
+ * the sticky error bit.
+ */
+ dap->dp_ctrl_stat = CDBGPWRUPREQ | CSYSPWRUPREQ;
- for (i = 0; i < nbytes; i++)
- {
- *((uint8_t*)buffer) = (invalue >> 8 * (address & 0x3));
- buffer++;
- address++;
- }
+ dap->do_reconnect = false;
- readcount -= (nbytes >> 1);
- } while (readcount);
- wcount -= blocksize;
+ dap_dp_read_atomic(dap, DP_CTRL_STAT, NULL);
+ if (dap->do_reconnect) {
+ /* dap connect calls dap_dp_init() after transport dependent initialization */
+ return dap->ops->connect(dap);
+ } else {
+ return dap_dp_init(dap);
}
-
- return retval;
}
/**
- * Synchronously read a block of 16-bit halfwords into a buffer
- * @param dap The DAP connected to the MEM-AP.
- * @param buffer where the halfwords will be stored (in host byte order).
- * @param count How many halfwords to read.
- * @param address Memory address from which to read words; all the
- * words must be readable by the currently selected MEM-AP.
+ * Initialize a DAP. This sets up the power domains, prepares the DP
+ * for further use, and arranges to use AP #0 for all AP operations
+ * until dap_ap-select() changes that policy.
+ *
+ * @param ap The MEM-AP being initialized.
*/
-int mem_ap_read_buf_u16(struct adiv5_dap *dap, uint8_t *buffer,
- int count, uint32_t address)
+int mem_ap_init(struct adiv5_ap *ap)
{
- uint32_t invalue, i;
- int retval = ERROR_OK;
+ /* check that we support packed transfers */
+ uint32_t csw, cfg;
+ int retval;
+ struct adiv5_dap *dap = ap->dap;
- if (count >= 4)
- return mem_ap_read_buf_packed_u16(dap, buffer, count, address);
+ /* Set ap->cfg_reg before calling mem_ap_setup_transfer(). */
+ /* mem_ap_setup_transfer() needs to know if the MEM_AP supports LPAE. */
+ retval = dap_queue_ap_read(ap, MEM_AP_REG_CFG(dap), &cfg);
+ if (retval != ERROR_OK)
+ return retval;
- while (count > 0)
- {
- retval = dap_setup_accessport(dap, CSW_16BIT | CSW_ADDRINC_SINGLE, address);
- if (retval != ERROR_OK)
- return retval;
- retval = dap_queue_ap_read(dap, AP_REG_DRW, &invalue);
- if (retval != ERROR_OK)
- break;
+ retval = dap_run(dap);
+ if (retval != ERROR_OK)
+ return retval;
- retval = dap_run(dap);
- if (retval != ERROR_OK)
- break;
+ ap->cfg_reg = cfg;
+ ap->tar_valid = false;
+ ap->csw_value = 0; /* force csw and tar write */
+ retval = mem_ap_setup_transfer(ap, CSW_8BIT | CSW_ADDRINC_PACKED, 0);
+ if (retval != ERROR_OK)
+ return retval;
- if (address & 0x1)
- {
- for (i = 0; i < 2; i++)
- {
- *((uint8_t*)buffer) = (invalue >> 8 * (address & 0x3));
- buffer++;
- address++;
- }
- }
- else
- {
- uint16_t svalue = (invalue >> 8 * (address & 0x3));
- memcpy(buffer, &svalue, sizeof(uint16_t));
- address += 2;
- buffer += 2;
- }
- count -= 2;
- }
+ retval = dap_queue_ap_read(ap, MEM_AP_REG_CSW(dap), &csw);
+ if (retval != ERROR_OK)
+ return retval;
- return retval;
+ retval = dap_run(dap);
+ if (retval != ERROR_OK)
+ return retval;
+
+ if (csw & CSW_ADDRINC_PACKED)
+ ap->packed_transfers = true;
+ else
+ ap->packed_transfers = false;
+
+ /* Packed transfers on TI BE-32 processors do not work correctly in
+ * many cases. */
+ if (dap->ti_be_32_quirks)
+ ap->packed_transfers = false;
+
+ LOG_DEBUG("MEM_AP Packed Transfers: %s",
+ ap->packed_transfers ? "enabled" : "disabled");
+
+ /* The ARM ADI spec leaves implementation-defined whether unaligned
+ * memory accesses work, only work partially, or cause a sticky error.
+ * On TI BE-32 processors, reads seem to return garbage in some bytes
+ * and unaligned writes seem to cause a sticky error.
+ * TODO: it would be nice to have a way to detect whether unaligned
+ * operations are supported on other processors. */
+ ap->unaligned_access_bad = dap->ti_be_32_quirks;
+
+ LOG_DEBUG("MEM_AP CFG: large data %d, long address %d, big-endian %d",
+ !!(cfg & MEM_AP_REG_CFG_LD), !!(cfg & MEM_AP_REG_CFG_LA), !!(cfg & MEM_AP_REG_CFG_BE));
+
+ return ERROR_OK;
}
-/* FIX!!! is this a potential performance bottleneck w.r.t. requiring too many
- * roundtrips when jtag_execute_queue() has a large overhead(e.g. for USB)s?
+/**
+ * Put the debug link into SWD mode, if the target supports it.
+ * The link's initial mode may be either JTAG (for example,
+ * with SWJ-DP after reset) or SWD.
+ *
+ * Note that targets using the JTAG-DP do not support SWD, and that
+ * some targets which could otherwise support it may have been
+ * configured to disable SWD signaling
*
- * The solution is to arrange for a large out/in scan in this loop and
- * and convert data afterwards.
+ * @param dap The DAP used
+ * @return ERROR_OK or else a fault code.
*/
-static int mem_ap_read_buf_packed_u8(struct adiv5_dap *dap,
- uint8_t *buffer, int count, uint32_t address)
+int dap_to_swd(struct adiv5_dap *dap)
{
- uint32_t invalue;
- int retval = ERROR_OK;
- int wcount, blocksize, readcount, i;
+ LOG_DEBUG("Enter SWD mode");
- wcount = count;
+ return dap_send_sequence(dap, JTAG_TO_SWD);
+}
- while (wcount > 0)
- {
- int nbytes;
+/**
+ * Put the debug link into JTAG mode, if the target supports it.
+ * The link's initial mode may be either SWD or JTAG.
+ *
+ * Note that targets implemented with SW-DP do not support JTAG, and
+ * that some targets which could otherwise support it may have been
+ * configured to disable JTAG signaling
+ *
+ * @param dap The DAP used
+ * @return ERROR_OK or else a fault code.
+ */
+int dap_to_jtag(struct adiv5_dap *dap)
+{
+ LOG_DEBUG("Enter JTAG mode");
- /* Adjust to read blocks within boundaries aligned to the TAR autoincremnent size*/
- blocksize = max_tar_block_size(dap->tar_autoincr_block, address);
+ return dap_send_sequence(dap, SWD_TO_JTAG);
+}
- if (wcount < blocksize)
- blocksize = wcount;
+/* CID interpretation -- see ARM IHI 0029E table B2-7
+ * and ARM IHI 0031E table D1-2.
+ *
+ * From 2009/11/25 commit 21378f58b604:
+ * "OptimoDE DESS" is ARM's semicustom DSPish stuff.
+ * Let's keep it as is, for the time being
+ */
+static const char *class_description[16] = {
+ [0x0] = "Generic verification component",
+ [0x1] = "ROM table",
+ [0x2] = "Reserved",
+ [0x3] = "Reserved",
+ [0x4] = "Reserved",
+ [0x5] = "Reserved",
+ [0x6] = "Reserved",
+ [0x7] = "Reserved",
+ [0x8] = "Reserved",
+ [0x9] = "CoreSight component",
+ [0xA] = "Reserved",
+ [0xB] = "Peripheral Test Block",
+ [0xC] = "Reserved",
+ [0xD] = "OptimoDE DESS", /* see above */
+ [0xE] = "Generic IP component",
+ [0xF] = "CoreLink, PrimeCell or System component",
+};
- retval = dap_setup_accessport(dap, CSW_8BIT | CSW_ADDRINC_PACKED, address);
- if (retval != ERROR_OK)
- return retval;
- readcount = blocksize;
+#define ARCH_ID(architect, archid) ( \
+ (((architect) << ARM_CS_C9_DEVARCH_ARCHITECT_SHIFT) & ARM_CS_C9_DEVARCH_ARCHITECT_MASK) | \
+ (((archid) << ARM_CS_C9_DEVARCH_ARCHID_SHIFT) & ARM_CS_C9_DEVARCH_ARCHID_MASK) \
+)
+
+static const struct {
+ uint32_t arch_id;
+ const char *description;
+} class0x9_devarch[] = {
+ /* keep same unsorted order as in ARM IHI0029E */
+ { ARCH_ID(ARM_ID, 0x0A00), "RAS architecture" },
+ { ARCH_ID(ARM_ID, 0x1A01), "Instrumentation Trace Macrocell (ITM) architecture" },
+ { ARCH_ID(ARM_ID, 0x1A02), "DWT architecture" },
+ { ARCH_ID(ARM_ID, 0x1A03), "Flash Patch and Breakpoint unit (FPB) architecture" },
+ { ARCH_ID(ARM_ID, 0x2A04), "Processor debug architecture (ARMv8-M)" },
+ { ARCH_ID(ARM_ID, 0x6A05), "Processor debug architecture (ARMv8-R)" },
+ { ARCH_ID(ARM_ID, 0x0A10), "PC sample-based profiling" },
+ { ARCH_ID(ARM_ID, 0x4A13), "Embedded Trace Macrocell (ETM) architecture" },
+ { ARCH_ID(ARM_ID, 0x1A14), "Cross Trigger Interface (CTI) architecture" },
+ { ARCH_ID(ARM_ID, 0x6A15), "Processor debug architecture (v8.0-A)" },
+ { ARCH_ID(ARM_ID, 0x7A15), "Processor debug architecture (v8.1-A)" },
+ { ARCH_ID(ARM_ID, 0x8A15), "Processor debug architecture (v8.2-A)" },
+ { ARCH_ID(ARM_ID, 0x2A16), "Processor Performance Monitor (PMU) architecture" },
+ { ARCH_ID(ARM_ID, 0x0A17), "Memory Access Port v2 architecture" },
+ { ARCH_ID(ARM_ID, 0x0A27), "JTAG Access Port v2 architecture" },
+ { ARCH_ID(ARM_ID, 0x0A31), "Basic trace router" },
+ { ARCH_ID(ARM_ID, 0x0A37), "Power requestor" },
+ { ARCH_ID(ARM_ID, 0x0A47), "Unknown Access Port v2 architecture" },
+ { ARCH_ID(ARM_ID, 0x0A50), "HSSTP architecture" },
+ { ARCH_ID(ARM_ID, 0x0A63), "System Trace Macrocell (STM) architecture" },
+ { ARCH_ID(ARM_ID, 0x0A75), "CoreSight ELA architecture" },
+ { ARCH_ID(ARM_ID, 0x0AF7), "CoreSight ROM architecture" },
+};
- do
- {
- retval = dap_queue_ap_read(dap, AP_REG_DRW, &invalue);
- if (retval != ERROR_OK)
- return retval;
- if ((retval = dap_run(dap)) != ERROR_OK)
- {
- LOG_WARNING("Block read error address 0x%" PRIx32 ", count 0x%x", address, count);
- return retval;
- }
+#define DEVARCH_ID_MASK (ARM_CS_C9_DEVARCH_ARCHITECT_MASK | ARM_CS_C9_DEVARCH_ARCHID_MASK)
+#define DEVARCH_MEM_AP ARCH_ID(ARM_ID, 0x0A17)
+#define DEVARCH_ROM_C_0X9 ARCH_ID(ARM_ID, 0x0AF7)
+#define DEVARCH_UNKNOWN_V2 ARCH_ID(ARM_ID, 0x0A47)
- nbytes = MIN(readcount, 4);
+static const char *class0x9_devarch_description(uint32_t devarch)
+{
+ if (!(devarch & ARM_CS_C9_DEVARCH_PRESENT))
+ return "not present";
- for (i = 0; i < nbytes; i++)
- {
- *((uint8_t*)buffer) = (invalue >> 8 * (address & 0x3));
- buffer++;
- address++;
- }
+ for (unsigned int i = 0; i < ARRAY_SIZE(class0x9_devarch); i++)
+ if ((devarch & DEVARCH_ID_MASK) == class0x9_devarch[i].arch_id)
+ return class0x9_devarch[i].description;
+
+ return "unknown";
+}
+
+static const struct {
+ enum ap_type type;
+ const char *description;
+} ap_types[] = {
+ { AP_TYPE_JTAG_AP, "JTAG-AP" },
+ { AP_TYPE_COM_AP, "COM-AP" },
+ { AP_TYPE_AHB3_AP, "MEM-AP AHB3" },
+ { AP_TYPE_APB_AP, "MEM-AP APB2 or APB3" },
+ { AP_TYPE_AXI_AP, "MEM-AP AXI3 or AXI4" },
+ { AP_TYPE_AHB5_AP, "MEM-AP AHB5" },
+ { AP_TYPE_APB4_AP, "MEM-AP APB4" },
+ { AP_TYPE_AXI5_AP, "MEM-AP AXI5" },
+ { AP_TYPE_AHB5H_AP, "MEM-AP AHB5 with enhanced HPROT" },
+};
+
+static const char *ap_type_to_description(enum ap_type type)
+{
+ for (unsigned int i = 0; i < ARRAY_SIZE(ap_types); i++)
+ if (type == ap_types[i].type)
+ return ap_types[i].description;
+
+ return "Unknown";
+}
- readcount -= nbytes;
- } while (readcount);
- wcount -= blocksize;
+bool is_ap_num_valid(struct adiv5_dap *dap, uint64_t ap_num)
+{
+ if (!dap)
+ return false;
+
+ /* no autodetection, by now, so uninitialized is equivalent to ADIv5 for
+ * backward compatibility */
+ if (!is_adiv6(dap)) {
+ if (ap_num > DP_APSEL_MAX)
+ return false;
+ return true;
}
- return retval;
+ if (is_adiv6(dap)) {
+ if (ap_num & 0x0fffULL)
+ return false;
+ if (dap->asize != 0)
+ if (ap_num & ((~0ULL) << dap->asize))
+ return false;
+ return true;
+ }
+
+ return false;
}
-/**
- * Synchronously read a block of bytes into a buffer
- * @param dap The DAP connected to the MEM-AP.
- * @param buffer where the bytes will be stored.
- * @param count How many bytes to read.
- * @param address Memory address from which to read data; all the
- * data must be readable by the currently selected MEM-AP.
+/*
+ * This function checks the ID for each access port to find the requested Access Port type
+ * It also calls dap_get_ap() to increment the AP refcount
*/
-int mem_ap_read_buf_u8(struct adiv5_dap *dap, uint8_t *buffer,
- int count, uint32_t address)
+int dap_find_get_ap(struct adiv5_dap *dap, enum ap_type type_to_find, struct adiv5_ap **ap_out)
{
- uint32_t invalue;
- int retval = ERROR_OK;
+ if (is_adiv6(dap)) {
+ /* TODO: scan the ROM table and detect the AP available */
+ LOG_DEBUG("On ADIv6 we cannot scan all the possible AP");
+ return ERROR_FAIL;
+ }
- if (count >= 4)
- return mem_ap_read_buf_packed_u8(dap, buffer, count, address);
+ /* Maximum AP number is 255 since the SELECT register is 8 bits */
+ for (unsigned int ap_num = 0; ap_num <= DP_APSEL_MAX; ap_num++) {
+ struct adiv5_ap *ap = dap_get_ap(dap, ap_num);
+ if (!ap)
+ continue;
- while (count > 0)
- {
- retval = dap_setup_accessport(dap, CSW_8BIT | CSW_ADDRINC_SINGLE, address);
- if (retval != ERROR_OK)
- return retval;
- retval = dap_queue_ap_read(dap, AP_REG_DRW, &invalue);
- if (retval != ERROR_OK)
+ /* read the IDR register of the Access Port */
+ uint32_t id_val = 0;
+
+ int retval = dap_queue_ap_read(ap, AP_REG_IDR(dap), &id_val);
+ if (retval != ERROR_OK) {
+ dap_put_ap(ap);
return retval;
+ }
+
retval = dap_run(dap);
- if (retval != ERROR_OK)
- break;
- *((uint8_t*)buffer) = (invalue >> 8 * (address & 0x3));
- count--;
- address++;
- buffer++;
+ /* Reading register for a non-existent AP should not cause an error,
+ * but just to be sure, try to continue searching if an error does happen.
+ */
+ if (retval == ERROR_OK && (id_val & AP_TYPE_MASK) == type_to_find) {
+ LOG_DEBUG("Found %s at AP index: %d (IDR=0x%08" PRIX32 ")",
+ ap_type_to_description(type_to_find),
+ ap_num, id_val);
+
+ *ap_out = ap;
+ return ERROR_OK;
+ }
+ dap_put_ap(ap);
}
- return retval;
+ LOG_DEBUG("No %s found", ap_type_to_description(type_to_find));
+ return ERROR_FAIL;
}
-/*--------------------------------------------------------------------*/
-/* Wrapping function with selection of AP */
-/*--------------------------------------------------------------------*/
-int mem_ap_sel_read_u32(struct adiv5_dap *swjdp, uint8_t ap,
- uint32_t address, uint32_t *value)
+static inline bool is_ap_in_use(struct adiv5_ap *ap)
{
- dap_ap_select(swjdp, ap);
- return mem_ap_read_u32(swjdp, address, value);
+ return ap->refcount > 0 || ap->config_ap_never_release;
}
-int mem_ap_sel_write_u32(struct adiv5_dap *swjdp, uint8_t ap,
- uint32_t address, uint32_t value)
+static struct adiv5_ap *_dap_get_ap(struct adiv5_dap *dap, uint64_t ap_num)
{
- dap_ap_select(swjdp, ap);
- return mem_ap_write_u32(swjdp, address, value);
+ if (!is_ap_num_valid(dap, ap_num)) {
+ LOG_ERROR("Invalid AP#0x%" PRIx64, ap_num);
+ return NULL;
+ }
+ if (is_adiv6(dap)) {
+ for (unsigned int i = 0; i <= DP_APSEL_MAX; i++) {
+ struct adiv5_ap *ap = &dap->ap[i];
+ if (is_ap_in_use(ap) && ap->ap_num == ap_num) {
+ ++ap->refcount;
+ return ap;
+ }
+ }
+ for (unsigned int i = 0; i <= DP_APSEL_MAX; i++) {
+ struct adiv5_ap *ap = &dap->ap[i];
+ if (!is_ap_in_use(ap)) {
+ ap->ap_num = ap_num;
+ ++ap->refcount;
+ return ap;
+ }
+ }
+ LOG_ERROR("No more AP available!");
+ return NULL;
+ }
+
+ /* ADIv5 */
+ struct adiv5_ap *ap = &dap->ap[ap_num];
+ ap->ap_num = ap_num;
+ ++ap->refcount;
+ return ap;
}
-int mem_ap_sel_read_atomic_u32(struct adiv5_dap *swjdp, uint8_t ap,
- uint32_t address, uint32_t *value)
+/* Return AP with specified ap_num. Increment AP refcount */
+struct adiv5_ap *dap_get_ap(struct adiv5_dap *dap, uint64_t ap_num)
{
- dap_ap_select(swjdp, ap);
- return mem_ap_read_atomic_u32(swjdp, address, value);
+ struct adiv5_ap *ap = _dap_get_ap(dap, ap_num);
+ if (ap)
+ LOG_DEBUG("refcount AP#0x%" PRIx64 " get %u", ap_num, ap->refcount);
+ return ap;
}
-int mem_ap_sel_write_atomic_u32(struct adiv5_dap *swjdp, uint8_t ap,
- uint32_t address, uint32_t value)
+/* Return AP with specified ap_num. Increment AP refcount and keep it non-zero */
+struct adiv5_ap *dap_get_config_ap(struct adiv5_dap *dap, uint64_t ap_num)
{
- dap_ap_select(swjdp, ap);
- return mem_ap_write_atomic_u32(swjdp, address, value);
+ struct adiv5_ap *ap = _dap_get_ap(dap, ap_num);
+ if (ap) {
+ ap->config_ap_never_release = true;
+ LOG_DEBUG("refcount AP#0x%" PRIx64 " get_config %u", ap_num, ap->refcount);
+ }
+ return ap;
}
-int mem_ap_sel_read_buf_u8(struct adiv5_dap *swjdp, uint8_t ap,
- uint8_t *buffer, int count, uint32_t address)
+/* Decrement AP refcount and release the AP when refcount reaches zero */
+int dap_put_ap(struct adiv5_ap *ap)
{
- dap_ap_select(swjdp, ap);
- return mem_ap_read_buf_u8(swjdp, buffer, count, address);
+ if (ap->refcount == 0) {
+ LOG_ERROR("BUG: refcount AP#0x%" PRIx64 " put underflow", ap->ap_num);
+ return ERROR_FAIL;
+ }
+
+ --ap->refcount;
+
+ LOG_DEBUG("refcount AP#0x%" PRIx64 " put %u", ap->ap_num, ap->refcount);
+ if (!is_ap_in_use(ap)) {
+ /* defaults from dap_instance_init() */
+ ap->ap_num = DP_APSEL_INVALID;
+ ap->memaccess_tck = 255;
+ ap->tar_autoincr_block = (1 << 10);
+ ap->csw_default = CSW_AHB_DEFAULT;
+ ap->cfg_reg = MEM_AP_REG_CFG_INVALID;
+ }
+ return ERROR_OK;
}
-int mem_ap_sel_read_buf_u16(struct adiv5_dap *swjdp, uint8_t ap,
- uint8_t *buffer, int count, uint32_t address)
+static int dap_get_debugbase(struct adiv5_ap *ap,
+ target_addr_t *dbgbase, uint32_t *apid)
{
- dap_ap_select(swjdp, ap);
- return mem_ap_read_buf_u16(swjdp, buffer, count, address);
+ struct adiv5_dap *dap = ap->dap;
+ int retval;
+ uint32_t baseptr_upper, baseptr_lower;
+
+ if (ap->cfg_reg == MEM_AP_REG_CFG_INVALID) {
+ retval = dap_queue_ap_read(ap, MEM_AP_REG_CFG(dap), &ap->cfg_reg);
+ if (retval != ERROR_OK)
+ return retval;
+ }
+ retval = dap_queue_ap_read(ap, MEM_AP_REG_BASE(dap), &baseptr_lower);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = dap_queue_ap_read(ap, AP_REG_IDR(dap), apid);
+ if (retval != ERROR_OK)
+ return retval;
+ /* MEM_AP_REG_BASE64 is defined as 'RES0'; can be read and then ignored on 32 bits AP */
+ if (ap->cfg_reg == MEM_AP_REG_CFG_INVALID || is_64bit_ap(ap)) {
+ retval = dap_queue_ap_read(ap, MEM_AP_REG_BASE64(dap), &baseptr_upper);
+ if (retval != ERROR_OK)
+ return retval;
+ }
+
+ retval = dap_run(dap);
+ if (retval != ERROR_OK)
+ return retval;
+
+ if (!is_64bit_ap(ap))
+ baseptr_upper = 0;
+ *dbgbase = (((target_addr_t)baseptr_upper) << 32) | baseptr_lower;
+
+ return ERROR_OK;
+}
+
+int adiv6_dap_read_baseptr(struct command_invocation *cmd, struct adiv5_dap *dap, uint64_t *baseptr)
+{
+ uint32_t baseptr_lower, baseptr_upper = 0;
+ int retval;
+
+ if (dap->asize > 32) {
+ retval = dap_queue_dp_read(dap, DP_BASEPTR1, &baseptr_upper);
+ if (retval != ERROR_OK)
+ return retval;
+ }
+
+ retval = dap_dp_read_atomic(dap, DP_BASEPTR0, &baseptr_lower);
+ if (retval != ERROR_OK)
+ return retval;
+
+ if ((baseptr_lower & DP_BASEPTR0_VALID) != DP_BASEPTR0_VALID) {
+ command_print(cmd, "System root table not present");
+ return ERROR_FAIL;
+ }
+
+ baseptr_lower &= ~0x0fff;
+ *baseptr = (((uint64_t)baseptr_upper) << 32) | baseptr_lower;
+
+ return ERROR_OK;
}
-int mem_ap_sel_read_buf_u32(struct adiv5_dap *swjdp, uint8_t ap,
- uint8_t *buffer, int count, uint32_t address)
+/**
+ * Method to access the CoreSight component.
+ * On ADIv5, CoreSight components are on the bus behind a MEM-AP.
+ * On ADIv6, CoreSight components can either be on the bus behind a MEM-AP
+ * or directly in the AP.
+ */
+enum coresight_access_mode {
+ CS_ACCESS_AP,
+ CS_ACCESS_MEM_AP,
+};
+
+/** Holds registers and coordinates of a CoreSight component */
+struct cs_component_vals {
+ struct adiv5_ap *ap;
+ target_addr_t component_base;
+ uint64_t pid;
+ uint32_t cid;
+ uint32_t devarch;
+ uint32_t devid;
+ uint32_t devtype_memtype;
+ enum coresight_access_mode mode;
+};
+
+/**
+ * Helper to read CoreSight component's registers, either on the bus
+ * behind a MEM-AP or directly in the AP.
+ *
+ * @param mode Method to access the component (AP or MEM-AP).
+ * @param ap Pointer to AP containing the component.
+ * @param component_base On MEM-AP access method, base address of the component.
+ * @param reg Offset of the component's register to read.
+ * @param value Pointer to the store the read value.
+ *
+ * @return ERROR_OK on success, else a fault code.
+ */
+static int dap_queue_read_reg(enum coresight_access_mode mode, struct adiv5_ap *ap,
+ uint64_t component_base, unsigned int reg, uint32_t *value)
{
- dap_ap_select(swjdp, ap);
- return mem_ap_read_buf_u32(swjdp, buffer, count, address);
+ if (mode == CS_ACCESS_AP)
+ return dap_queue_ap_read(ap, reg, value);
+
+ /* mode == CS_ACCESS_MEM_AP */
+ return mem_ap_read_u32(ap, component_base + reg, value);
}
-int mem_ap_sel_write_buf_u8(struct adiv5_dap *swjdp, uint8_t ap,
- const uint8_t *buffer, int count, uint32_t address)
+/**
+ * Read the CoreSight registers needed during ROM Table Parsing (RTP).
+ *
+ * @param mode Method to access the component (AP or MEM-AP).
+ * @param ap Pointer to AP containing the component.
+ * @param component_base On MEM-AP access method, base address of the component.
+ * @param v Pointer to the struct holding the value of registers.
+ *
+ * @return ERROR_OK on success, else a fault code.
+ */
+static int rtp_read_cs_regs(enum coresight_access_mode mode, struct adiv5_ap *ap,
+ target_addr_t component_base, struct cs_component_vals *v)
{
- dap_ap_select(swjdp, ap);
- return mem_ap_write_buf_u8(swjdp, buffer, count, address);
+ assert(IS_ALIGNED(component_base, ARM_CS_ALIGN));
+ assert(ap && v);
+
+ uint32_t cid0, cid1, cid2, cid3;
+ uint32_t pid0, pid1, pid2, pid3, pid4;
+ int retval = ERROR_OK;
+
+ v->ap = ap;
+ v->component_base = component_base;
+ v->mode = mode;
+
+ /* sort by offset to gain speed */
+
+ /*
+ * Registers DEVARCH, DEVID and DEVTYPE are valid on Class 0x9 devices
+ * only, but are at offset above 0xf00, so can be read on any device
+ * without triggering error. Read them for eventual use on Class 0x9.
+ */
+ if (retval == ERROR_OK)
+ retval = dap_queue_read_reg(mode, ap, component_base, ARM_CS_C9_DEVARCH, &v->devarch);
+
+ if (retval == ERROR_OK)
+ retval = dap_queue_read_reg(mode, ap, component_base, ARM_CS_C9_DEVID, &v->devid);
+
+ /* Same address as ARM_CS_C1_MEMTYPE */
+ if (retval == ERROR_OK)
+ retval = dap_queue_read_reg(mode, ap, component_base, ARM_CS_C9_DEVTYPE, &v->devtype_memtype);
+
+ if (retval == ERROR_OK)
+ retval = dap_queue_read_reg(mode, ap, component_base, ARM_CS_PIDR4, &pid4);
+
+ if (retval == ERROR_OK)
+ retval = dap_queue_read_reg(mode, ap, component_base, ARM_CS_PIDR0, &pid0);
+ if (retval == ERROR_OK)
+ retval = dap_queue_read_reg(mode, ap, component_base, ARM_CS_PIDR1, &pid1);
+ if (retval == ERROR_OK)
+ retval = dap_queue_read_reg(mode, ap, component_base, ARM_CS_PIDR2, &pid2);
+ if (retval == ERROR_OK)
+ retval = dap_queue_read_reg(mode, ap, component_base, ARM_CS_PIDR3, &pid3);
+
+ if (retval == ERROR_OK)
+ retval = dap_queue_read_reg(mode, ap, component_base, ARM_CS_CIDR0, &cid0);
+ if (retval == ERROR_OK)
+ retval = dap_queue_read_reg(mode, ap, component_base, ARM_CS_CIDR1, &cid1);
+ if (retval == ERROR_OK)
+ retval = dap_queue_read_reg(mode, ap, component_base, ARM_CS_CIDR2, &cid2);
+ if (retval == ERROR_OK)
+ retval = dap_queue_read_reg(mode, ap, component_base, ARM_CS_CIDR3, &cid3);
+
+ if (retval == ERROR_OK)
+ retval = dap_run(ap->dap);
+ if (retval != ERROR_OK) {
+ LOG_DEBUG("Failed read CoreSight registers");
+ return retval;
+ }
+
+ v->cid = (cid3 & 0xff) << 24
+ | (cid2 & 0xff) << 16
+ | (cid1 & 0xff) << 8
+ | (cid0 & 0xff);
+ v->pid = (uint64_t)(pid4 & 0xff) << 32
+ | (pid3 & 0xff) << 24
+ | (pid2 & 0xff) << 16
+ | (pid1 & 0xff) << 8
+ | (pid0 & 0xff);
+
+ return ERROR_OK;
}
-int mem_ap_sel_write_buf_u16(struct adiv5_dap *swjdp, uint8_t ap,
- const uint8_t *buffer, int count, uint32_t address)
+/* Part number interpretations are from Cortex
+ * core specs, the CoreSight components TRM
+ * (ARM DDI 0314H), CoreSight System Design
+ * Guide (ARM DGI 0012D) and ETM specs; also
+ * from chip observation (e.g. TI SDTI).
+ */
+
+static const struct dap_part_nums {
+ uint16_t designer_id;
+ uint16_t part_num;
+ const char *type;
+ const char *full;
+} dap_part_nums[] = {
+ { ARM_ID, 0x000, "Cortex-M3 SCS", "(System Control Space)", },
+ { ARM_ID, 0x001, "Cortex-M3 ITM", "(Instrumentation Trace Module)", },
+ { ARM_ID, 0x002, "Cortex-M3 DWT", "(Data Watchpoint and Trace)", },
+ { ARM_ID, 0x003, "Cortex-M3 FPB", "(Flash Patch and Breakpoint)", },
+ { ARM_ID, 0x008, "Cortex-M0 SCS", "(System Control Space)", },
+ { ARM_ID, 0x00a, "Cortex-M0 DWT", "(Data Watchpoint and Trace)", },
+ { ARM_ID, 0x00b, "Cortex-M0 BPU", "(Breakpoint Unit)", },
+ { ARM_ID, 0x00c, "Cortex-M4 SCS", "(System Control Space)", },
+ { ARM_ID, 0x00d, "CoreSight ETM11", "(Embedded Trace)", },
+ { ARM_ID, 0x00e, "Cortex-M7 FPB", "(Flash Patch and Breakpoint)", },
+ { ARM_ID, 0x193, "SoC-600 TSGEN", "(Timestamp Generator)", },
+ { ARM_ID, 0x470, "Cortex-M1 ROM", "(ROM Table)", },
+ { ARM_ID, 0x471, "Cortex-M0 ROM", "(ROM Table)", },
+ { ARM_ID, 0x490, "Cortex-A15 GIC", "(Generic Interrupt Controller)", },
+ { ARM_ID, 0x492, "Cortex-R52 GICD", "(Distributor)", },
+ { ARM_ID, 0x493, "Cortex-R52 GICR", "(Redistributor)", },
+ { ARM_ID, 0x4a1, "Cortex-A53 ROM", "(v8 Memory Map ROM Table)", },
+ { ARM_ID, 0x4a2, "Cortex-A57 ROM", "(ROM Table)", },
+ { ARM_ID, 0x4a3, "Cortex-A53 ROM", "(v7 Memory Map ROM Table)", },
+ { ARM_ID, 0x4a4, "Cortex-A72 ROM", "(ROM Table)", },
+ { ARM_ID, 0x4a9, "Cortex-A9 ROM", "(ROM Table)", },
+ { ARM_ID, 0x4aa, "Cortex-A35 ROM", "(v8 Memory Map ROM Table)", },
+ { ARM_ID, 0x4af, "Cortex-A15 ROM", "(ROM Table)", },
+ { ARM_ID, 0x4b5, "Cortex-R5 ROM", "(ROM Table)", },
+ { ARM_ID, 0x4b8, "Cortex-R52 ROM", "(ROM Table)", },
+ { ARM_ID, 0x4c0, "Cortex-M0+ ROM", "(ROM Table)", },
+ { ARM_ID, 0x4c3, "Cortex-M3 ROM", "(ROM Table)", },
+ { ARM_ID, 0x4c4, "Cortex-M4 ROM", "(ROM Table)", },
+ { ARM_ID, 0x4c7, "Cortex-M7 PPB ROM", "(Private Peripheral Bus ROM Table)", },
+ { ARM_ID, 0x4c8, "Cortex-M7 ROM", "(ROM Table)", },
+ { ARM_ID, 0x4e0, "Cortex-A35 ROM", "(v7 Memory Map ROM Table)", },
+ { ARM_ID, 0x4e4, "Cortex-A76 ROM", "(ROM Table)", },
+ { ARM_ID, 0x906, "CoreSight CTI", "(Cross Trigger)", },
+ { ARM_ID, 0x907, "CoreSight ETB", "(Trace Buffer)", },
+ { ARM_ID, 0x908, "CoreSight CSTF", "(Trace Funnel)", },
+ { ARM_ID, 0x909, "CoreSight ATBR", "(Advanced Trace Bus Replicator)", },
+ { ARM_ID, 0x910, "CoreSight ETM9", "(Embedded Trace)", },
+ { ARM_ID, 0x912, "CoreSight TPIU", "(Trace Port Interface Unit)", },
+ { ARM_ID, 0x913, "CoreSight ITM", "(Instrumentation Trace Macrocell)", },
+ { ARM_ID, 0x914, "CoreSight SWO", "(Single Wire Output)", },
+ { ARM_ID, 0x917, "CoreSight HTM", "(AHB Trace Macrocell)", },
+ { ARM_ID, 0x920, "CoreSight ETM11", "(Embedded Trace)", },
+ { ARM_ID, 0x921, "Cortex-A8 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x922, "Cortex-A8 CTI", "(Cross Trigger)", },
+ { ARM_ID, 0x923, "Cortex-M3 TPIU", "(Trace Port Interface Unit)", },
+ { ARM_ID, 0x924, "Cortex-M3 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x925, "Cortex-M4 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x930, "Cortex-R4 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x931, "Cortex-R5 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x932, "CoreSight MTB-M0+", "(Micro Trace Buffer)", },
+ { ARM_ID, 0x941, "CoreSight TPIU-Lite", "(Trace Port Interface Unit)", },
+ { ARM_ID, 0x950, "Cortex-A9 PTM", "(Program Trace Macrocell)", },
+ { ARM_ID, 0x955, "Cortex-A5 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x95a, "Cortex-A72 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x95b, "Cortex-A17 PTM", "(Program Trace Macrocell)", },
+ { ARM_ID, 0x95d, "Cortex-A53 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x95e, "Cortex-A57 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x95f, "Cortex-A15 PTM", "(Program Trace Macrocell)", },
+ { ARM_ID, 0x961, "CoreSight TMC", "(Trace Memory Controller)", },
+ { ARM_ID, 0x962, "CoreSight STM", "(System Trace Macrocell)", },
+ { ARM_ID, 0x975, "Cortex-M7 ETM", "(Embedded Trace)", },
+ { ARM_ID, 0x9a0, "CoreSight PMU", "(Performance Monitoring Unit)", },
+ { ARM_ID, 0x9a1, "Cortex-M4 TPIU", "(Trace Port Interface Unit)", },
+ { ARM_ID, 0x9a4, "CoreSight GPR", "(Granular Power Requester)", },
+ { ARM_ID, 0x9a5, "Cortex-A5 PMU", "(Performance Monitor Unit)", },
+ { ARM_ID, 0x9a7, "Cortex-A7 PMU", "(Performance Monitor Unit)", },
+ { ARM_ID, 0x9a8, "Cortex-A53 CTI", "(Cross Trigger)", },
+ { ARM_ID, 0x9a9, "Cortex-M7 TPIU", "(Trace Port Interface Unit)", },
+ { ARM_ID, 0x9ae, "Cortex-A17 PMU", "(Performance Monitor Unit)", },
+ { ARM_ID, 0x9af, "Cortex-A15 PMU", "(Performance Monitor Unit)", },
+ { ARM_ID, 0x9b6, "Cortex-R52 PMU/CTI/ETM", "(Performance Monitor Unit/Cross Trigger/ETM)", },
+ { ARM_ID, 0x9b7, "Cortex-R7 PMU", "(Performance Monitor Unit)", },
+ { ARM_ID, 0x9d3, "Cortex-A53 PMU", "(Performance Monitor Unit)", },
+ { ARM_ID, 0x9d7, "Cortex-A57 PMU", "(Performance Monitor Unit)", },
+ { ARM_ID, 0x9d8, "Cortex-A72 PMU", "(Performance Monitor Unit)", },
+ { ARM_ID, 0x9da, "Cortex-A35 PMU/CTI/ETM", "(Performance Monitor Unit/Cross Trigger/ETM)", },
+ { ARM_ID, 0x9e2, "SoC-600 APB-AP", "(APB4 Memory Access Port)", },
+ { ARM_ID, 0x9e3, "SoC-600 AHB-AP", "(AHB5 Memory Access Port)", },
+ { ARM_ID, 0x9e4, "SoC-600 AXI-AP", "(AXI Memory Access Port)", },
+ { ARM_ID, 0x9e5, "SoC-600 APv1 Adapter", "(Access Port v1 Adapter)", },
+ { ARM_ID, 0x9e6, "SoC-600 JTAG-AP", "(JTAG Access Port)", },
+ { ARM_ID, 0x9e7, "SoC-600 TPIU", "(Trace Port Interface Unit)", },
+ { ARM_ID, 0x9e8, "SoC-600 TMC ETR/ETS", "(Embedded Trace Router/Streamer)", },
+ { ARM_ID, 0x9e9, "SoC-600 TMC ETB", "(Embedded Trace Buffer)", },
+ { ARM_ID, 0x9ea, "SoC-600 TMC ETF", "(Embedded Trace FIFO)", },
+ { ARM_ID, 0x9eb, "SoC-600 ATB Funnel", "(Trace Funnel)", },
+ { ARM_ID, 0x9ec, "SoC-600 ATB Replicator", "(Trace Replicator)", },
+ { ARM_ID, 0x9ed, "SoC-600 CTI", "(Cross Trigger)", },
+ { ARM_ID, 0x9ee, "SoC-600 CATU", "(Address Translation Unit)", },
+ { ARM_ID, 0xc05, "Cortex-A5 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xc07, "Cortex-A7 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xc08, "Cortex-A8 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xc09, "Cortex-A9 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xc0e, "Cortex-A17 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xc0f, "Cortex-A15 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xc14, "Cortex-R4 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xc15, "Cortex-R5 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xc17, "Cortex-R7 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xd03, "Cortex-A53 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xd04, "Cortex-A35 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xd07, "Cortex-A57 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xd08, "Cortex-A72 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xd0b, "Cortex-A76 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xd0c, "Neoverse N1", "(Debug Unit)", },
+ { ARM_ID, 0xd13, "Cortex-R52 Debug", "(Debug Unit)", },
+ { ARM_ID, 0xd49, "Neoverse N2", "(Debug Unit)", },
+ { 0x017, 0x120, "TI SDTI", "(System Debug Trace Interface)", }, /* from OMAP3 memmap */
+ { 0x017, 0x343, "TI DAPCTL", "", }, /* from OMAP3 memmap */
+ { 0x017, 0x9af, "MSP432 ROM", "(ROM Table)" },
+ { 0x01f, 0xcd0, "Atmel CPU with DSU", "(CPU)" },
+ { 0x041, 0x1db, "XMC4500 ROM", "(ROM Table)" },
+ { 0x041, 0x1df, "XMC4700/4800 ROM", "(ROM Table)" },
+ { 0x041, 0x1ed, "XMC1000 ROM", "(ROM Table)" },
+ { 0x065, 0x000, "SHARC+/Blackfin+", "", },
+ { 0x070, 0x440, "Qualcomm QDSS Component v1", "(Qualcomm Designed CoreSight Component v1)", },
+ { 0x0bf, 0x100, "Brahma-B53 Debug", "(Debug Unit)", },
+ { 0x0bf, 0x9d3, "Brahma-B53 PMU", "(Performance Monitor Unit)", },
+ { 0x0bf, 0x4a1, "Brahma-B53 ROM", "(ROM Table)", },
+ { 0x0bf, 0x721, "Brahma-B53 ROM", "(ROM Table)", },
+ { 0x1eb, 0x181, "Tegra 186 ROM", "(ROM Table)", },
+ { 0x1eb, 0x202, "Denver ETM", "(Denver Embedded Trace)", },
+ { 0x1eb, 0x211, "Tegra 210 ROM", "(ROM Table)", },
+ { 0x1eb, 0x302, "Denver Debug", "(Debug Unit)", },
+ { 0x1eb, 0x402, "Denver PMU", "(Performance Monitor Unit)", },
+};
+
+static const struct dap_part_nums *pidr_to_part_num(unsigned int designer_id, unsigned int part_num)
{
- dap_ap_select(swjdp, ap);
- return mem_ap_write_buf_u16(swjdp, buffer, count, address);
+ static const struct dap_part_nums unknown = {
+ .type = "Unrecognized",
+ .full = "",
+ };
+
+ for (unsigned int i = 0; i < ARRAY_SIZE(dap_part_nums); i++)
+ if (dap_part_nums[i].designer_id == designer_id && dap_part_nums[i].part_num == part_num)
+ return &dap_part_nums[i];
+
+ return &unknown;
}
-int mem_ap_sel_write_buf_u32(struct adiv5_dap *swjdp, uint8_t ap,
- const uint8_t *buffer, int count, uint32_t address)
+static int dap_devtype_display(struct command_invocation *cmd, uint32_t devtype)
{
- dap_ap_select(swjdp, ap);
- return mem_ap_write_buf_u32(swjdp, buffer, count, address);
+ const char *major = "Reserved", *subtype = "Reserved";
+ const unsigned int minor = (devtype & ARM_CS_C9_DEVTYPE_SUB_MASK) >> ARM_CS_C9_DEVTYPE_SUB_SHIFT;
+ const unsigned int devtype_major = (devtype & ARM_CS_C9_DEVTYPE_MAJOR_MASK) >> ARM_CS_C9_DEVTYPE_MAJOR_SHIFT;
+ switch (devtype_major) {
+ case 0:
+ major = "Miscellaneous";
+ switch (minor) {
+ case 0:
+ subtype = "other";
+ break;
+ case 4:
+ subtype = "Validation component";
+ break;
+ }
+ break;
+ case 1:
+ major = "Trace Sink";
+ switch (minor) {
+ case 0:
+ subtype = "other";
+ break;
+ case 1:
+ subtype = "Port";
+ break;
+ case 2:
+ subtype = "Buffer";
+ break;
+ case 3:
+ subtype = "Router";
+ break;
+ }
+ break;
+ case 2:
+ major = "Trace Link";
+ switch (minor) {
+ case 0:
+ subtype = "other";
+ break;
+ case 1:
+ subtype = "Funnel, router";
+ break;
+ case 2:
+ subtype = "Filter";
+ break;
+ case 3:
+ subtype = "FIFO, buffer";
+ break;
+ }
+ break;
+ case 3:
+ major = "Trace Source";
+ switch (minor) {
+ case 0:
+ subtype = "other";
+ break;
+ case 1:
+ subtype = "Processor";
+ break;
+ case 2:
+ subtype = "DSP";
+ break;
+ case 3:
+ subtype = "Engine/Coprocessor";
+ break;
+ case 4:
+ subtype = "Bus";
+ break;
+ case 6:
+ subtype = "Software";
+ break;
+ }
+ break;
+ case 4:
+ major = "Debug Control";
+ switch (minor) {
+ case 0:
+ subtype = "other";
+ break;
+ case 1:
+ subtype = "Trigger Matrix";
+ break;
+ case 2:
+ subtype = "Debug Auth";
+ break;
+ case 3:
+ subtype = "Power Requestor";
+ break;
+ }
+ break;
+ case 5:
+ major = "Debug Logic";
+ switch (minor) {
+ case 0:
+ subtype = "other";
+ break;
+ case 1:
+ subtype = "Processor";
+ break;
+ case 2:
+ subtype = "DSP";
+ break;
+ case 3:
+ subtype = "Engine/Coprocessor";
+ break;
+ case 4:
+ subtype = "Bus";
+ break;
+ case 5:
+ subtype = "Memory";
+ break;
+ }
+ break;
+ case 6:
+ major = "Performance Monitor";
+ switch (minor) {
+ case 0:
+ subtype = "other";
+ break;
+ case 1:
+ subtype = "Processor";
+ break;
+ case 2:
+ subtype = "DSP";
+ break;
+ case 3:
+ subtype = "Engine/Coprocessor";
+ break;
+ case 4:
+ subtype = "Bus";
+ break;
+ case 5:
+ subtype = "Memory";
+ break;
+ }
+ break;
+ }
+ command_print(cmd, "\t\tType is 0x%02x, %s, %s",
+ devtype & ARM_CS_C9_DEVTYPE_MASK,
+ major, subtype);
+ return ERROR_OK;
}
-#define MDM_REG_STAT 0x00
-#define MDM_REG_CTRL 0x04
-#define MDM_REG_ID 0xfc
+/**
+ * Actions/operations to be executed while parsing ROM tables.
+ */
+struct rtp_ops {
+ /**
+ * Executed at the start of a new AP, typically to print the AP header.
+ * @param ap Pointer to AP.
+ * @param depth The current depth level of ROM table.
+ * @param priv Pointer to private data.
+ * @return ERROR_OK on success, else a fault code.
+ */
+ int (*ap_header)(struct adiv5_ap *ap, int depth, void *priv);
+ /**
+ * Executed at the start of a new MEM-AP, typically to print the MEM-AP header.
+ * @param retval Error encountered while reading AP.
+ * @param ap Pointer to AP.
+ * @param dbgbase Value of MEM-AP Debug Base Address register.
+ * @param apid Value of MEM-AP IDR Identification Register.
+ * @param depth The current depth level of ROM table.
+ * @param priv Pointer to private data.
+ * @return ERROR_OK on success, else a fault code.
+ */
+ int (*mem_ap_header)(int retval, struct adiv5_ap *ap, uint64_t dbgbase,
+ uint32_t apid, int depth, void *priv);
+ /**
+ * Executed when a CoreSight component is parsed, typically to print
+ * information on the component.
+ * @param retval Error encountered while reading component's registers.
+ * @param v Pointer to a container of the component's registers.
+ * @param depth The current depth level of ROM table.
+ * @param priv Pointer to private data.
+ * @return ERROR_OK on success, else a fault code.
+ */
+ int (*cs_component)(int retval, struct cs_component_vals *v, int depth, void *priv);
+ /**
+ * Executed for each entry of a ROM table, typically to print the entry
+ * and information about validity or end-of-table mark.
+ * @param retval Error encountered while reading the ROM table entry.
+ * @param depth The current depth level of ROM table.
+ * @param offset The offset of the entry in the ROM table.
+ * @param romentry The value of the ROM table entry.
+ * @param priv Pointer to private data.
+ * @return ERROR_OK on success, else a fault code.
+ */
+ int (*rom_table_entry)(int retval, int depth, unsigned int offset, uint64_t romentry,
+ void *priv);
+ /**
+ * Private data
+ */
+ void *priv;
+};
-#define MDM_STAT_FMEACK (1<<0)
-#define MDM_STAT_FREADY (1<<1)
-#define MDM_STAT_SYSSEC (1<<2)
-#define MDM_STAT_SYSRES (1<<3)
-#define MDM_STAT_FMEEN (1<<5)
-#define MDM_STAT_BACKDOOREN (1<<6)
-#define MDM_STAT_LPEN (1<<7)
-#define MDM_STAT_VLPEN (1<<8)
-#define MDM_STAT_LLSMODEXIT (1<<9)
-#define MDM_STAT_VLLSXMODEXIT (1<<10)
-#define MDM_STAT_CORE_HALTED (1<<16)
-#define MDM_STAT_CORE_SLEEPDEEP (1<<17)
-#define MDM_STAT_CORESLEEPING (1<<18)
+/**
+ * Wrapper around struct rtp_ops::ap_header.
+ */
+static int rtp_ops_ap_header(const struct rtp_ops *ops,
+ struct adiv5_ap *ap, int depth)
+{
+ if (ops->ap_header)
+ return ops->ap_header(ap, depth, ops->priv);
-#define MEM_CTRL_FMEIP (1<<0)
-#define MEM_CTRL_DBG_DIS (1<<1)
-#define MEM_CTRL_DBG_REQ (1<<2)
-#define MEM_CTRL_SYS_RES_REQ (1<<3)
-#define MEM_CTRL_CORE_HOLD_RES (1<<4)
-#define MEM_CTRL_VLLSX_DBG_REQ (1<<5)
-#define MEM_CTRL_VLLSX_DBG_ACK (1<<6)
-#define MEM_CTRL_VLLSX_STAT_ACK (1<<7)
+ return ERROR_OK;
+}
/**
- *
+ * Wrapper around struct rtp_ops::mem_ap_header.
+ * Input parameter @a retval is propagated.
*/
-int dap_syssec_kinetis_mdmap(struct adiv5_dap *dap)
+static int rtp_ops_mem_ap_header(const struct rtp_ops *ops,
+ int retval, struct adiv5_ap *ap, uint64_t dbgbase, uint32_t apid, int depth)
{
- uint32_t val;
- int retval;
- enum reset_types jtag_reset_config = jtag_get_reset_config();
+ if (!ops->mem_ap_header)
+ return retval;
- dap_ap_select(dap, 1);
+ int retval1 = ops->mem_ap_header(retval, ap, dbgbase, apid, depth, ops->priv);
+ if (retval != ERROR_OK)
+ return retval;
+ return retval1;
+}
- /* first check mdm-ap id register */
- retval = dap_queue_ap_read(dap, MDM_REG_ID, &val);
+/**
+ * Wrapper around struct rtp_ops::cs_component.
+ * Input parameter @a retval is propagated.
+ */
+static int rtp_ops_cs_component(const struct rtp_ops *ops,
+ int retval, struct cs_component_vals *v, int depth)
+{
+ if (!ops->cs_component)
+ return retval;
+
+ int retval1 = ops->cs_component(retval, v, depth, ops->priv);
if (retval != ERROR_OK)
return retval;
- dap_run(dap);
+ return retval1;
+}
- if ( val != 0x001C0000 )
- {
- LOG_DEBUG("id doesn't match %08X != 0x001C0000",val);
- dap_ap_select(dap, 0);
- return ERROR_FAIL;
- }
+/**
+ * Wrapper around struct rtp_ops::rom_table_entry.
+ * Input parameter @a retval is propagated.
+ */
+static int rtp_ops_rom_table_entry(const struct rtp_ops *ops,
+ int retval, int depth, unsigned int offset, uint64_t romentry)
+{
+ if (!ops->rom_table_entry)
+ return retval;
- /* read and parse status register
- * it's important that the device is out of
- * reset here
- */
- retval = dap_queue_ap_read(dap, MDM_REG_STAT, &val);
+ int retval1 = ops->rom_table_entry(retval, depth, offset, romentry, ops->priv);
if (retval != ERROR_OK)
return retval;
- dap_run(dap);
+ return retval1;
+}
- LOG_DEBUG("MDM_REG_STAT %08X",val);
+/* Broken ROM tables can have circular references. Stop after a while */
+#define ROM_TABLE_MAX_DEPTH (16)
- if ( (val & (MDM_STAT_SYSSEC|MDM_STAT_FREADY)) != (MDM_STAT_FREADY) )
- {
- LOG_DEBUG("MDMAP: system is secured, masserase needed");
+/**
+ * Value used only during lookup of a CoreSight component in ROM table.
+ * Return CORESIGHT_COMPONENT_FOUND when component is found.
+ * Return ERROR_OK when component is not found yet.
+ * Return any other ERROR_* in case of error.
+ */
+#define CORESIGHT_COMPONENT_FOUND (1)
+
+static int rtp_ap(const struct rtp_ops *ops, struct adiv5_ap *ap, int depth);
+static int rtp_cs_component(enum coresight_access_mode mode, const struct rtp_ops *ops,
+ struct adiv5_ap *ap, target_addr_t dbgbase, bool *is_mem_ap, int depth);
- if ( !(val & MDM_STAT_FMEEN) )
- {
- LOG_DEBUG("MDMAP: masserase is disabled");
+static int rtp_rom_loop(enum coresight_access_mode mode, const struct rtp_ops *ops,
+ struct adiv5_ap *ap, target_addr_t base_address, int depth,
+ unsigned int width, unsigned int max_entries)
+{
+ /* ADIv6 AP ROM table provide offset from current AP */
+ if (mode == CS_ACCESS_AP)
+ base_address = ap->ap_num;
+
+ assert(IS_ALIGNED(base_address, ARM_CS_ALIGN));
+
+ unsigned int offset = 0;
+ while (max_entries--) {
+ uint64_t romentry;
+ uint32_t romentry_low, romentry_high;
+ target_addr_t component_base;
+ unsigned int saved_offset = offset;
+
+ int retval = dap_queue_read_reg(mode, ap, base_address, offset, &romentry_low);
+ offset += 4;
+ if (retval == ERROR_OK && width == 64) {
+ retval = dap_queue_read_reg(mode, ap, base_address, offset, &romentry_high);
+ offset += 4;
+ }
+ if (retval == ERROR_OK)
+ retval = dap_run(ap->dap);
+ if (retval != ERROR_OK) {
+ LOG_DEBUG("Failed read ROM table entry");
+ return retval;
}
- else
- {
- /* we need to assert reset */
- if ( jtag_reset_config & RESET_HAS_SRST )
- {
- /* default to asserting srst */
- if (jtag_reset_config & RESET_SRST_PULLS_TRST)
- {
- jtag_add_reset(1, 1);
- }
- else
- {
- jtag_add_reset(0, 1);
- }
- }
- else
- {
- LOG_DEBUG("SRST not configured");
- dap_ap_select(dap, 0);
- return ERROR_FAIL;
- }
- while(1)
- {
- retval = dap_queue_ap_write(dap, MDM_REG_CTRL, MEM_CTRL_FMEIP);
- if (retval != ERROR_OK)
- return retval;
- dap_run(dap);
- /* read status register and wait for ready */
- retval = dap_queue_ap_read(dap, MDM_REG_STAT, &val);
- if (retval != ERROR_OK)
- return retval;
- dap_run(dap);
- LOG_DEBUG("MDM_REG_STAT %08X",val);
-
- if ( (val&1))
- break;
- }
+ if (width == 64) {
+ romentry = (((uint64_t)romentry_high) << 32) | romentry_low;
+ component_base = base_address +
+ ((((uint64_t)romentry_high) << 32) | (romentry_low & ARM_CS_ROMENTRY_OFFSET_MASK));
+ } else {
+ romentry = romentry_low;
+ /* "romentry" is signed */
+ component_base = base_address + (int32_t)(romentry_low & ARM_CS_ROMENTRY_OFFSET_MASK);
+ if (!is_64bit_ap(ap))
+ component_base = (uint32_t)component_base;
+ }
+ retval = rtp_ops_rom_table_entry(ops, retval, depth, saved_offset, romentry);
+ if (retval != ERROR_OK)
+ return retval;
+
+ if (romentry == 0) {
+ /* End of ROM table */
+ break;
+ }
+
+ if (!(romentry & ARM_CS_ROMENTRY_PRESENT))
+ continue;
- while(1)
- {
- retval = dap_queue_ap_write(dap, MDM_REG_CTRL, 0);
- if (retval != ERROR_OK)
- return retval;
- dap_run(dap);
- /* read status register */
- retval = dap_queue_ap_read(dap, MDM_REG_STAT, &val);
- if (retval != ERROR_OK)
- return retval;
- dap_run(dap);
- LOG_DEBUG("MDM_REG_STAT %08X",val);
- /* read control register and wait for ready */
- retval = dap_queue_ap_read(dap, MDM_REG_CTRL, &val);
- if (retval != ERROR_OK)
- return retval;
- dap_run(dap);
- LOG_DEBUG("MDM_REG_CTRL %08X",val);
-
- if ( val == 0x00 )
- break;
+ /* Recurse */
+ if (mode == CS_ACCESS_AP) {
+ struct adiv5_ap *next_ap = dap_get_ap(ap->dap, component_base);
+ if (!next_ap) {
+ LOG_DEBUG("Wrong AP # 0x%" PRIx64, component_base);
+ continue;
}
+ retval = rtp_ap(ops, next_ap, depth + 1);
+ dap_put_ap(next_ap);
+ } else {
+ /* mode == CS_ACCESS_MEM_AP */
+ retval = rtp_cs_component(mode, ops, ap, component_base, NULL, depth + 1);
+ }
+ if (retval == CORESIGHT_COMPONENT_FOUND)
+ return CORESIGHT_COMPONENT_FOUND;
+ if (retval != ERROR_OK) {
+ /* TODO: do we need to send an ABORT before continuing? */
+ LOG_DEBUG("Ignore error parsing CoreSight component");
+ continue;
}
}
- dap_ap_select(dap, 0);
-
return ERROR_OK;
}
-/** */
-struct dap_syssec_filter {
- /** */
- uint32_t idcode;
- /** */
- int (*dap_init)(struct adiv5_dap *dap);
-};
+static int rtp_cs_component(enum coresight_access_mode mode, const struct rtp_ops *ops,
+ struct adiv5_ap *ap, target_addr_t base_address, bool *is_mem_ap, int depth)
+{
+ struct cs_component_vals v;
+ int retval;
-/** */
-static struct dap_syssec_filter dap_syssec_filter_data[] = {
- { 0x4BA00477, dap_syssec_kinetis_mdmap }
-};
+ assert(IS_ALIGNED(base_address, ARM_CS_ALIGN));
+ if (is_mem_ap)
+ *is_mem_ap = false;
-/**
- *
- */
-int dap_syssec(struct adiv5_dap *dap)
+ if (depth > ROM_TABLE_MAX_DEPTH)
+ retval = ERROR_FAIL;
+ else
+ retval = rtp_read_cs_regs(mode, ap, base_address, &v);
+
+ retval = rtp_ops_cs_component(ops, retval, &v, depth);
+ if (retval == CORESIGHT_COMPONENT_FOUND)
+ return CORESIGHT_COMPONENT_FOUND;
+ if (retval != ERROR_OK)
+ return ERROR_OK; /* Don't abort recursion */
+
+ if (!is_valid_arm_cs_cidr(v.cid))
+ return ERROR_OK; /* Don't abort recursion */
+
+ const unsigned int class = ARM_CS_CIDR_CLASS(v.cid);
+
+ if (class == ARM_CS_CLASS_0X1_ROM_TABLE)
+ return rtp_rom_loop(mode, ops, ap, base_address, depth, 32, 960);
+
+ if (class == ARM_CS_CLASS_0X9_CS_COMPONENT) {
+ if ((v.devarch & ARM_CS_C9_DEVARCH_PRESENT) == 0)
+ return ERROR_OK;
+
+ if (is_mem_ap) {
+ if ((v.devarch & DEVARCH_ID_MASK) == DEVARCH_MEM_AP)
+ *is_mem_ap = true;
+
+ /* SoC-600 APv1 Adapter */
+ if ((v.devarch & DEVARCH_ID_MASK) == DEVARCH_UNKNOWN_V2 &&
+ ARM_CS_PIDR_DESIGNER(v.pid) == ARM_ID &&
+ ARM_CS_PIDR_PART(v.pid) == 0x9e5)
+ *is_mem_ap = true;
+ }
+
+ /* quit if not ROM table */
+ if ((v.devarch & DEVARCH_ID_MASK) != DEVARCH_ROM_C_0X9)
+ return ERROR_OK;
+
+ if ((v.devid & ARM_CS_C9_DEVID_FORMAT_MASK) == ARM_CS_C9_DEVID_FORMAT_64BIT)
+ return rtp_rom_loop(mode, ops, ap, base_address, depth, 64, 256);
+ else
+ return rtp_rom_loop(mode, ops, ap, base_address, depth, 32, 512);
+ }
+
+ /* Class other than 0x1 and 0x9 */
+ return ERROR_OK;
+}
+
+static int rtp_ap(const struct rtp_ops *ops, struct adiv5_ap *ap, int depth)
{
- unsigned int i;
- struct jtag_tap *tap;
+ uint32_t apid;
+ target_addr_t dbgbase, invalid_entry;
+
+ int retval = rtp_ops_ap_header(ops, ap, depth);
+ if (retval != ERROR_OK || depth > ROM_TABLE_MAX_DEPTH)
+ return ERROR_OK; /* Don't abort recursion */
+
+ if (is_adiv6(ap->dap)) {
+ bool is_mem_ap;
+ retval = rtp_cs_component(CS_ACCESS_AP, ops, ap, 0, &is_mem_ap, depth);
+ if (retval == CORESIGHT_COMPONENT_FOUND)
+ return CORESIGHT_COMPONENT_FOUND;
+ if (retval != ERROR_OK)
+ return ERROR_OK; /* Don't abort recursion */
- for(i=0;i<sizeof(dap_syssec_filter_data);i++)
- {
- tap = dap->jtag_info->tap;
-
- while (tap != NULL)
- {
- if ( tap->hasidcode && (dap_syssec_filter_data[i].idcode == tap->idcode) )
- {
- LOG_DEBUG("DAP: mdmap_init for idcode: %08x",tap->idcode);
- dap_syssec_filter_data[i].dap_init(dap);
- }
- tap = tap->next_tap;
+ if (!is_mem_ap)
+ return ERROR_OK;
+ /* Continue for an ADIv6 MEM-AP or SoC-600 APv1 Adapter */
+ }
+
+ /* Now we read ROM table ID registers, ref. ARM IHI 0029B sec */
+ retval = dap_get_debugbase(ap, &dbgbase, &apid);
+ if (retval != ERROR_OK)
+ return retval;
+ retval = rtp_ops_mem_ap_header(ops, retval, ap, dbgbase, apid, depth);
+ if (retval != ERROR_OK)
+ return retval;
+
+ if (apid == 0)
+ return ERROR_FAIL;
+
+ /* NOTE: a MEM-AP may have a single CoreSight component that's
+ * not a ROM table ... or have no such components at all.
+ */
+ const unsigned int class = (apid & AP_REG_IDR_CLASS_MASK) >> AP_REG_IDR_CLASS_SHIFT;
+
+ if (class == AP_REG_IDR_CLASS_MEM_AP) {
+ if (is_64bit_ap(ap))
+ invalid_entry = 0xFFFFFFFFFFFFFFFFull;
+ else
+ invalid_entry = 0xFFFFFFFFul;
+
+ if (dbgbase != invalid_entry && (dbgbase & 0x3) != 0x2) {
+ retval = rtp_cs_component(CS_ACCESS_MEM_AP, ops, ap,
+ dbgbase & 0xFFFFFFFFFFFFF000ull, NULL, depth);
+ if (retval == CORESIGHT_COMPONENT_FOUND)
+ return CORESIGHT_COMPONENT_FOUND;
}
}
return ERROR_OK;
}
-/*--------------------------------------------------------------------------*/
+/* Actions for command "dap info" */
+static int dap_info_ap_header(struct adiv5_ap *ap, int depth, void *priv)
+{
+ struct command_invocation *cmd = priv;
-/* FIXME don't import ... just initialize as
- * part of DAP transport setup
-*/
-extern const struct dap_ops jtag_dp_ops;
+ if (depth > ROM_TABLE_MAX_DEPTH) {
+ command_print(cmd, "\tTables too deep");
+ return ERROR_FAIL;
+ }
-/*--------------------------------------------------------------------------*/
+ command_print(cmd, "%sAP # 0x%" PRIx64, (depth) ? "\t\t" : "", ap->ap_num);
+ return ERROR_OK;
+}
-/**
- * Initialize a DAP. This sets up the power domains, prepares the DP
- * for further use, and arranges to use AP #0 for all AP operations
- * until dap_ap-select() changes that policy.
- *
- * @param dap The DAP being initialized.
- *
- * @todo Rename this. We also need an initialization scheme which account
- * for SWD transports not just JTAG; that will need to address differences
- * in layering. (JTAG is useful without any debug target; but not SWD.)
- * And this may not even use an AHB-AP ... e.g. DAP-Lite uses an APB-AP.
- */
-int ahbap_debugport_init(struct adiv5_dap *dap)
+static int dap_info_mem_ap_header(int retval, struct adiv5_ap *ap,
+ target_addr_t dbgbase, uint32_t apid, int depth, void *priv)
{
- uint32_t ctrlstat;
- int cnt = 0;
- int retval;
+ struct command_invocation *cmd = priv;
+ target_addr_t invalid_entry;
+ char tabs[17] = "";
- LOG_DEBUG(" ");
+ if (retval != ERROR_OK) {
+ command_print(cmd, "\t\tCan't read MEM-AP, the corresponding core might be turned off");
+ return retval;
+ }
- /* JTAG-DP or SWJ-DP, in JTAG mode
- * ... for SWD mode this is patched as part
- * of link switchover
- */
- if (!dap->ops)
- dap->ops = &jtag_dp_ops;
+ if (depth > ROM_TABLE_MAX_DEPTH) {
+ command_print(cmd, "\tTables too deep");
+ return ERROR_FAIL;
+ }
- /* Default MEM-AP setup.
- *
- * REVISIT AP #0 may be an inappropriate default for this.
- * Should we probe, or take a hint from the caller?
- * Presumably we can ignore the possibility of multiple APs.
+ if (depth)
+ snprintf(tabs, sizeof(tabs), "\t[L%02d] ", depth);
+
+ command_print(cmd, "\t\tAP ID register 0x%8.8" PRIx32, apid);
+ if (apid == 0) {
+ command_print(cmd, "\t\tNo AP found at this AP#0x%" PRIx64, ap->ap_num);
+ return ERROR_FAIL;
+ }
+
+ command_print(cmd, "\t\tType is %s", ap_type_to_description(apid & AP_TYPE_MASK));
+
+ /* NOTE: a MEM-AP may have a single CoreSight component that's
+ * not a ROM table ... or have no such components at all.
*/
- dap->ap_current = !0;
- dap_ap_select(dap, 0);
+ const unsigned int class = (apid & AP_REG_IDR_CLASS_MASK) >> AP_REG_IDR_CLASS_SHIFT;
- /* DP initialization */
+ if (class == AP_REG_IDR_CLASS_MEM_AP) {
+ if (is_64bit_ap(ap))
+ invalid_entry = 0xFFFFFFFFFFFFFFFFull;
+ else
+ invalid_entry = 0xFFFFFFFFul;
- retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
- if (retval != ERROR_OK)
- return retval;
+ command_print(cmd, "%sMEM-AP BASE " TARGET_ADDR_FMT, tabs, dbgbase);
- retval = dap_queue_dp_write(dap, DP_CTRL_STAT, SSTICKYERR);
- if (retval != ERROR_OK)
- return retval;
+ if (dbgbase == invalid_entry || (dbgbase & 0x3) == 0x2) {
+ command_print(cmd, "\t\tNo ROM table present");
+ } else {
+ if (dbgbase & 0x01)
+ command_print(cmd, "\t\tValid ROM table present");
+ else
+ command_print(cmd, "\t\tROM table in legacy format");
+ }
+ }
- retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
- if (retval != ERROR_OK)
- return retval;
+ return ERROR_OK;
+}
- dap->dp_ctrl_stat = CDBGPWRUPREQ | CSYSPWRUPREQ;
- retval = dap_queue_dp_write(dap, DP_CTRL_STAT, dap->dp_ctrl_stat);
- if (retval != ERROR_OK)
- return retval;
+static int dap_info_cs_component(int retval, struct cs_component_vals *v, int depth, void *priv)
+{
+ struct command_invocation *cmd = priv;
- retval = dap_queue_dp_read(dap, DP_CTRL_STAT, &ctrlstat);
- if (retval != ERROR_OK)
- return retval;
- if ((retval = dap_run(dap)) != ERROR_OK)
+ if (depth > ROM_TABLE_MAX_DEPTH) {
+ command_print(cmd, "\tTables too deep");
+ return ERROR_FAIL;
+ }
+
+ if (v->mode == CS_ACCESS_MEM_AP)
+ command_print(cmd, "\t\tComponent base address " TARGET_ADDR_FMT, v->component_base);
+
+ if (retval != ERROR_OK) {
+ command_print(cmd, "\t\tCan't read component, the corresponding core might be turned off");
return retval;
+ }
- /* Check that we have debug power domains activated */
- while (!(ctrlstat & CDBGPWRUPACK) && (cnt++ < 10))
- {
- LOG_DEBUG("DAP: wait CDBGPWRUPACK");
- retval = dap_queue_dp_read(dap, DP_CTRL_STAT, &ctrlstat);
- if (retval != ERROR_OK)
- return retval;
- if ((retval = dap_run(dap)) != ERROR_OK)
- return retval;
- alive_sleep(10);
+ if (!is_valid_arm_cs_cidr(v->cid)) {
+ command_print(cmd, "\t\tInvalid CID 0x%08" PRIx32, v->cid);
+ return ERROR_OK; /* Don't abort recursion */
+ }
+
+ /* component may take multiple 4K pages */
+ uint32_t size = ARM_CS_PIDR_SIZE(v->pid);
+ if (size > 0)
+ command_print(cmd, "\t\tStart address " TARGET_ADDR_FMT, v->component_base - 0x1000 * size);
+
+ command_print(cmd, "\t\tPeripheral ID 0x%010" PRIx64, v->pid);
+
+ const unsigned int part_num = ARM_CS_PIDR_PART(v->pid);
+ unsigned int designer_id = ARM_CS_PIDR_DESIGNER(v->pid);
+
+ if (v->pid & ARM_CS_PIDR_JEDEC) {
+ /* JEP106 code */
+ command_print(cmd, "\t\tDesigner is 0x%03x, %s",
+ designer_id, jep106_manufacturer(designer_id));
+ } else {
+ /* Legacy ASCII ID, clear invalid bits */
+ designer_id &= 0x7f;
+ command_print(cmd, "\t\tDesigner ASCII code 0x%02x, %s",
+ designer_id, designer_id == 0x41 ? "ARM" : "<unknown>");
+ }
+
+ const struct dap_part_nums *partnum = pidr_to_part_num(designer_id, part_num);
+ command_print(cmd, "\t\tPart is 0x%03x, %s %s", part_num, partnum->type, partnum->full);
+
+ const unsigned int class = ARM_CS_CIDR_CLASS(v->cid);
+ command_print(cmd, "\t\tComponent class is 0x%x, %s", class, class_description[class]);
+
+ if (class == ARM_CS_CLASS_0X1_ROM_TABLE) {
+ if (v->devtype_memtype & ARM_CS_C1_MEMTYPE_SYSMEM_MASK)
+ command_print(cmd, "\t\tMEMTYPE system memory present on bus");
+ else
+ command_print(cmd, "\t\tMEMTYPE system memory not present: dedicated debug bus");
+ return ERROR_OK;
+ }
+
+ if (class == ARM_CS_CLASS_0X9_CS_COMPONENT) {
+ dap_devtype_display(cmd, v->devtype_memtype);
+
+ /* REVISIT also show ARM_CS_C9_DEVID */
+
+ if ((v->devarch & ARM_CS_C9_DEVARCH_PRESENT) == 0)
+ return ERROR_OK;
+
+ unsigned int architect_id = ARM_CS_C9_DEVARCH_ARCHITECT(v->devarch);
+ unsigned int revision = ARM_CS_C9_DEVARCH_REVISION(v->devarch);
+ command_print(cmd, "\t\tDev Arch is 0x%08" PRIx32 ", %s \"%s\" rev.%u", v->devarch,
+ jep106_manufacturer(architect_id), class0x9_devarch_description(v->devarch),
+ revision);
+
+ if ((v->devarch & DEVARCH_ID_MASK) == DEVARCH_ROM_C_0X9) {
+ command_print(cmd, "\t\tType is ROM table");
+
+ if (v->devid & ARM_CS_C9_DEVID_SYSMEM_MASK)
+ command_print(cmd, "\t\tMEMTYPE system memory present on bus");
+ else
+ command_print(cmd, "\t\tMEMTYPE system memory not present: dedicated debug bus");
+ }
+ return ERROR_OK;
+ }
+
+ /* Class other than 0x1 and 0x9 */
+ return ERROR_OK;
+}
+
+static int dap_info_rom_table_entry(int retval, int depth,
+ unsigned int offset, uint64_t romentry, void *priv)
+{
+ struct command_invocation *cmd = priv;
+ char tabs[16] = "";
+
+ if (depth)
+ snprintf(tabs, sizeof(tabs), "[L%02d] ", depth);
+
+ if (retval != ERROR_OK) {
+ command_print(cmd, "\t%sROMTABLE[0x%x] Read error", tabs, offset);
+ command_print(cmd, "\t\tUnable to continue");
+ command_print(cmd, "\t%s\tStop parsing of ROM table", tabs);
+ return retval;
}
- while (!(ctrlstat & CSYSPWRUPACK) && (cnt++ < 10))
- {
- LOG_DEBUG("DAP: wait CSYSPWRUPACK");
- retval = dap_queue_dp_read(dap, DP_CTRL_STAT, &ctrlstat);
- if (retval != ERROR_OK)
- return retval;
- if ((retval = dap_run(dap)) != ERROR_OK)
- return retval;
- alive_sleep(10);
- }
+ command_print(cmd, "\t%sROMTABLE[0x%x] = 0x%08" PRIx64,
+ tabs, offset, romentry);
- retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
- if (retval != ERROR_OK)
- return retval;
- /* With debug power on we can activate OVERRUN checking */
- dap->dp_ctrl_stat = CDBGPWRUPREQ | CSYSPWRUPREQ | CORUNDETECT;
- retval = dap_queue_dp_write(dap, DP_CTRL_STAT, dap->dp_ctrl_stat);
- if (retval != ERROR_OK)
- return retval;
- retval = dap_queue_dp_read(dap, DP_CTRL_STAT, NULL);
- if (retval != ERROR_OK)
- return retval;
+ if (romentry == 0) {
+ command_print(cmd, "\t%s\tEnd of ROM table", tabs);
+ return ERROR_OK;
+ }
- dap_syssec(dap);
+ if (!(romentry & ARM_CS_ROMENTRY_PRESENT)) {
+ command_print(cmd, "\t\tComponent not present");
+ return ERROR_OK;
+ }
return ERROR_OK;
}
-/* CID interpretation -- see ARM IHI 0029B section 3
- * and ARM IHI 0031A table 13-3.
- */
-static const char *class_description[16] ={
- "Reserved", "ROM table", "Reserved", "Reserved",
- "Reserved", "Reserved", "Reserved", "Reserved",
- "Reserved", "CoreSight component", "Reserved", "Peripheral Test Block",
- "Reserved", "OptimoDE DESS",
- "Generic IP component", "PrimeCell or System component"
-};
-
-static bool
-is_dap_cid_ok(uint32_t cid3, uint32_t cid2, uint32_t cid1, uint32_t cid0)
+int dap_info_command(struct command_invocation *cmd, struct adiv5_ap *ap)
{
- return cid3 == 0xb1 && cid2 == 0x05
- && ((cid1 & 0x0f) == 0) && cid0 == 0x0d;
+ struct rtp_ops dap_info_ops = {
+ .ap_header = dap_info_ap_header,
+ .mem_ap_header = dap_info_mem_ap_header,
+ .cs_component = dap_info_cs_component,
+ .rom_table_entry = dap_info_rom_table_entry,
+ .priv = cmd,
+ };
+
+ return rtp_ap(&dap_info_ops, ap, 0);
}
-int dap_get_debugbase(struct adiv5_dap *dap, int ap,
- uint32_t *out_dbgbase, uint32_t *out_apid)
-{
- uint32_t ap_old;
- int retval;
- uint32_t dbgbase, apid;
+/* Actions for dap_lookup_cs_component() */
- /* AP address is in bits 31:24 of DP_SELECT */
- if (ap >= 256)
- return ERROR_COMMAND_SYNTAX_ERROR;
+struct dap_lookup_data {
+ /* input */
+ unsigned int idx;
+ unsigned int type;
+ /* output */
+ uint64_t component_base;
+ uint64_t ap_num;
+};
- ap_old = dap->ap_current;
- dap_ap_select(dap, ap);
+static int dap_lookup_cs_component_cs_component(int retval,
+ struct cs_component_vals *v, int depth, void *priv)
+{
+ struct dap_lookup_data *lookup = priv;
- retval = dap_queue_ap_read(dap, AP_REG_BASE, &dbgbase);
- if (retval != ERROR_OK)
- return retval;
- retval = dap_queue_ap_read(dap, AP_REG_IDR, &apid);
- if (retval != ERROR_OK)
- return retval;
- retval = dap_run(dap);
if (retval != ERROR_OK)
return retval;
- /* Excavate the device ID code */
- struct jtag_tap *tap = dap->jtag_info->tap;
- while (tap != NULL) {
- if (tap->hasidcode)
- break;
- tap = tap->next_tap;
- }
- if (tap == NULL || !tap->hasidcode)
+ if (!is_valid_arm_cs_cidr(v->cid))
return ERROR_OK;
- dap_ap_select(dap, ap_old);
+ const unsigned int class = ARM_CS_CIDR_CLASS(v->cid);
+ if (class != ARM_CS_CLASS_0X9_CS_COMPONENT)
+ return ERROR_OK;
- /* The asignment happens only here to prevent modification of these
- * values before they are certain. */
- *out_dbgbase = dbgbase;
- *out_apid = apid;
+ if ((v->devtype_memtype & ARM_CS_C9_DEVTYPE_MASK) != lookup->type)
+ return ERROR_OK;
- return ERROR_OK;
+ if (lookup->idx) {
+ /* search for next one */
+ --lookup->idx;
+ return ERROR_OK;
+ }
+
+ /* Found! */
+ lookup->component_base = v->component_base;
+ lookup->ap_num = v->ap->ap_num;
+ return CORESIGHT_COMPONENT_FOUND;
}
-int dap_lookup_cs_component(struct adiv5_dap *dap, int ap,
- uint32_t dbgbase, uint8_t type, uint32_t *addr)
+int dap_lookup_cs_component(struct adiv5_ap *ap, uint8_t type,
+ target_addr_t *addr, int32_t core_id)
{
- uint32_t ap_old;
- uint32_t romentry, entry_offset = 0, component_base, devtype;
- int retval = ERROR_FAIL;
-
- if (ap >= 256)
- return ERROR_COMMAND_SYNTAX_ERROR;
+ struct dap_lookup_data lookup = {
+ .type = type,
+ .idx = core_id,
+ };
+ struct rtp_ops dap_lookup_cs_component_ops = {
+ .ap_header = NULL,
+ .mem_ap_header = NULL,
+ .cs_component = dap_lookup_cs_component_cs_component,
+ .rom_table_entry = NULL,
+ .priv = &lookup,
+ };
+
+ int retval = rtp_ap(&dap_lookup_cs_component_ops, ap, 0);
+ if (retval == CORESIGHT_COMPONENT_FOUND) {
+ if (lookup.ap_num != ap->ap_num) {
+ /* TODO: handle search from root ROM table */
+ LOG_DEBUG("CS lookup ended in AP # 0x%" PRIx64 ". Ignore it", lookup.ap_num);
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ }
+ LOG_DEBUG("CS lookup found at 0x%" PRIx64, lookup.component_base);
+ *addr = lookup.component_base;
+ return ERROR_OK;
+ }
+ if (retval != ERROR_OK) {
+ LOG_DEBUG("CS lookup error %d", retval);
+ return retval;
+ }
+ LOG_DEBUG("CS lookup not found");
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+}
- ap_old = dap->ap_current;
- dap_ap_select(dap, ap);
+enum adiv5_cfg_param {
+ CFG_DAP,
+ CFG_AP_NUM,
+ CFG_BASEADDR,
+ CFG_CTIBASE, /* DEPRECATED */
+};
- do
- {
- retval = mem_ap_read_atomic_u32(dap, (dbgbase&0xFFFFF000) |
- entry_offset, &romentry);
- if (retval != ERROR_OK)
- return retval;
+static const struct jim_nvp nvp_config_opts[] = {
+ { .name = "-dap", .value = CFG_DAP },
+ { .name = "-ap-num", .value = CFG_AP_NUM },
+ { .name = "-baseaddr", .value = CFG_BASEADDR },
+ { .name = "-ctibase", .value = CFG_CTIBASE }, /* DEPRECATED */
+ { .name = NULL, .value = -1 }
+};
- component_base = (dbgbase & 0xFFFFF000)
- + (romentry & 0xFFFFF000);
+static int adiv5_jim_spot_configure(struct jim_getopt_info *goi,
+ struct adiv5_dap **dap_p, uint64_t *ap_num_p, uint32_t *base_p)
+{
+ assert(dap_p && ap_num_p);
+
+ if (!goi->argc)
+ return JIM_OK;
+
+ Jim_SetEmptyResult(goi->interp);
+
+ struct jim_nvp *n;
+ int e = jim_nvp_name2value_obj(goi->interp, nvp_config_opts,
+ goi->argv[0], &n);
+ if (e != JIM_OK)
+ return JIM_CONTINUE;
+
+ /* base_p can be NULL, then '-baseaddr' option is treated as unknown */
+ if (!base_p && (n->value == CFG_BASEADDR || n->value == CFG_CTIBASE))
+ return JIM_CONTINUE;
+
+ e = jim_getopt_obj(goi, NULL);
+ if (e != JIM_OK)
+ return e;
+
+ switch (n->value) {
+ case CFG_DAP:
+ if (goi->isconfigure) {
+ Jim_Obj *o_t;
+ struct adiv5_dap *dap;
+ e = jim_getopt_obj(goi, &o_t);
+ if (e != JIM_OK)
+ return e;
+ dap = dap_instance_by_jim_obj(goi->interp, o_t);
+ if (!dap) {
+ Jim_SetResultString(goi->interp, "DAP name invalid!", -1);
+ return JIM_ERR;
+ }
+ if (*dap_p && *dap_p != dap) {
+ Jim_SetResultString(goi->interp,
+ "DAP assignment cannot be changed!", -1);
+ return JIM_ERR;
+ }
+ *dap_p = dap;
+ } else {
+ if (goi->argc)
+ goto err_no_param;
+ if (!*dap_p) {
+ Jim_SetResultString(goi->interp, "DAP not configured", -1);
+ return JIM_ERR;
+ }
+ Jim_SetResultString(goi->interp, adiv5_dap_name(*dap_p), -1);
+ }
+ break;
- if (romentry & 0x1) {
- retval = mem_ap_read_atomic_u32(dap,
- (component_base & 0xfffff000) | 0xfcc,
- &devtype);
- if ((devtype & 0xff) == type) {
- *addr = component_base;
- retval = ERROR_OK;
- break;
+ case CFG_AP_NUM:
+ if (goi->isconfigure) {
+ /* jim_wide is a signed 64 bits int, ap_num is unsigned with max 52 bits */
+ jim_wide ap_num;
+ e = jim_getopt_wide(goi, &ap_num);
+ if (e != JIM_OK)
+ return e;
+ /* we still don't know dap->adi_version */
+ if (ap_num < 0 || (ap_num > DP_APSEL_MAX && (ap_num & 0xfff))) {
+ Jim_SetResultString(goi->interp, "Invalid AP number!", -1);
+ return JIM_ERR;
}
+ *ap_num_p = ap_num;
+ } else {
+ if (goi->argc)
+ goto err_no_param;
+ if (*ap_num_p == DP_APSEL_INVALID) {
+ Jim_SetResultString(goi->interp, "AP number not configured", -1);
+ return JIM_ERR;
+ }
+ Jim_SetResult(goi->interp, Jim_NewIntObj(goi->interp, *ap_num_p));
+ }
+ break;
+
+ case CFG_CTIBASE:
+ LOG_WARNING("DEPRECATED! use \'-baseaddr' not \'-ctibase\'");
+ /* fall through */
+ case CFG_BASEADDR:
+ if (goi->isconfigure) {
+ jim_wide base;
+ e = jim_getopt_wide(goi, &base);
+ if (e != JIM_OK)
+ return e;
+ *base_p = (uint32_t)base;
+ } else {
+ if (goi->argc)
+ goto err_no_param;
+ Jim_SetResult(goi->interp, Jim_NewIntObj(goi->interp, *base_p));
}
- entry_offset += 4;
- } while (romentry > 0);
+ break;
+ };
- dap_ap_select(dap, ap_old);
+ return JIM_OK;
- return retval;
+err_no_param:
+ Jim_WrongNumArgs(goi->interp, goi->argc, goi->argv, "NO PARAMS");
+ return JIM_ERR;
}
-static int dap_info_command(struct command_context *cmd_ctx,
- struct adiv5_dap *dap, int ap)
+int adiv5_jim_configure(struct target *target, struct jim_getopt_info *goi)
{
- int retval;
- uint32_t dbgbase = 0, apid = 0; /* Silence gcc by initializing */
- int romtable_present = 0;
- uint8_t mem_ap;
- uint32_t ap_old;
+ struct adiv5_private_config *pc;
+ int e;
+
+ pc = (struct adiv5_private_config *)target->private_config;
+ if (!pc) {
+ pc = calloc(1, sizeof(struct adiv5_private_config));
+ if (!pc) {
+ LOG_ERROR("Out of memory");
+ return JIM_ERR;
+ }
+ pc->ap_num = DP_APSEL_INVALID;
+ target->private_config = pc;
+ }
- retval = dap_get_debugbase(dap, ap, &dbgbase, &apid);
- if (retval != ERROR_OK)
- return retval;
+ target->has_dap = true;
- ap_old = dap->ap_current;
- dap_ap_select(dap, ap);
+ e = adiv5_jim_spot_configure(goi, &pc->dap, &pc->ap_num, NULL);
+ if (e != JIM_OK)
+ return e;
- /* Now we read ROM table ID registers, ref. ARM IHI 0029B sec */
- mem_ap = ((apid&0x10000) && ((apid&0x0F) != 0));
- command_print(cmd_ctx, "AP ID register 0x%8.8" PRIx32, apid);
- if (apid)
- {
- switch (apid&0x0F)
- {
- case 0:
- command_print(cmd_ctx, "\tType is JTAG-AP");
- break;
- case 1:
- command_print(cmd_ctx, "\tType is MEM-AP AHB");
- break;
- case 2:
- command_print(cmd_ctx, "\tType is MEM-AP APB");
- break;
- default:
- command_print(cmd_ctx, "\tUnknown AP type");
- break;
+ if (pc->dap && !target->dap_configured) {
+ if (target->tap_configured) {
+ pc->dap = NULL;
+ Jim_SetResultString(goi->interp,
+ "-chain-position and -dap configparams are mutually exclusive!", -1);
+ return JIM_ERR;
}
-
- /* NOTE: a MEM-AP may have a single CoreSight component that's
- * not a ROM table ... or have no such components at all.
- */
- if (mem_ap)
- command_print(cmd_ctx, "AP BASE 0x%8.8" PRIx32,
- dbgbase);
- }
- else
- {
- command_print(cmd_ctx, "No AP found at this ap 0x%x", ap);
+ target->tap = pc->dap->tap;
+ target->dap_configured = true;
}
- romtable_present = ((mem_ap) && (dbgbase != 0xFFFFFFFF));
- if (romtable_present)
- {
- uint32_t cid0,cid1,cid2,cid3,memtype,romentry;
- uint16_t entry_offset;
+ return JIM_OK;
+}
- /* bit 16 of apid indicates a memory access port */
- if (dbgbase & 0x02)
- command_print(cmd_ctx, "\tValid ROM table present");
- else
- command_print(cmd_ctx, "\tROM table in legacy format");
+int adiv5_verify_config(struct adiv5_private_config *pc)
+{
+ if (!pc)
+ return ERROR_FAIL;
- /* Now we read ROM table ID registers, ref. ARM IHI 0029B sec */
- retval = mem_ap_read_u32(dap, (dbgbase&0xFFFFF000) | 0xFF0, &cid0);
- if (retval != ERROR_OK)
- return retval;
- retval = mem_ap_read_u32(dap, (dbgbase&0xFFFFF000) | 0xFF4, &cid1);
- if (retval != ERROR_OK)
- return retval;
- retval = mem_ap_read_u32(dap, (dbgbase&0xFFFFF000) | 0xFF8, &cid2);
- if (retval != ERROR_OK)
- return retval;
- retval = mem_ap_read_u32(dap, (dbgbase&0xFFFFF000) | 0xFFC, &cid3);
- if (retval != ERROR_OK)
- return retval;
- retval = mem_ap_read_u32(dap, (dbgbase&0xFFFFF000) | 0xFCC, &memtype);
- if (retval != ERROR_OK)
- return retval;
- retval = dap_run(dap);
- if (retval != ERROR_OK)
- return retval;
+ if (!pc->dap)
+ return ERROR_FAIL;
- if (!is_dap_cid_ok(cid3, cid2, cid1, cid0))
- command_print(cmd_ctx, "\tCID3 0x%2.2x"
- ", CID2 0x%2.2x"
- ", CID1 0x%2.2x"
- ", CID0 0x%2.2x",
- (unsigned) cid3, (unsigned)cid2,
- (unsigned) cid1, (unsigned) cid0);
- if (memtype & 0x01)
- command_print(cmd_ctx, "\tMEMTYPE system memory present on bus");
- else
- command_print(cmd_ctx, "\tMEMTYPE System memory not present. "
- "Dedicated debug bus.");
-
- /* Now we read ROM table entries from dbgbase&0xFFFFF000) | 0x000 until we get 0x00000000 */
- entry_offset = 0;
- do
- {
- retval = mem_ap_read_atomic_u32(dap, (dbgbase&0xFFFFF000) | entry_offset, &romentry);
- if (retval != ERROR_OK)
- return retval;
- command_print(cmd_ctx, "\tROMTABLE[0x%x] = 0x%" PRIx32 "",entry_offset,romentry);
- if (romentry&0x01)
- {
- uint32_t c_cid0, c_cid1, c_cid2, c_cid3;
- uint32_t c_pid0, c_pid1, c_pid2, c_pid3, c_pid4;
- uint32_t component_base;
- unsigned part_num;
- char *type, *full;
-
- component_base = (dbgbase & 0xFFFFF000)
- + (romentry & 0xFFFFF000);
-
- /* IDs are in last 4K section */
-
-
- retval = mem_ap_read_atomic_u32(dap,
- component_base + 0xFE0, &c_pid0);
- if (retval != ERROR_OK)
- return retval;
- c_pid0 &= 0xff;
- retval = mem_ap_read_atomic_u32(dap,
- component_base + 0xFE4, &c_pid1);
- if (retval != ERROR_OK)
- return retval;
- c_pid1 &= 0xff;
- retval = mem_ap_read_atomic_u32(dap,
- component_base + 0xFE8, &c_pid2);
- if (retval != ERROR_OK)
- return retval;
- c_pid2 &= 0xff;
- retval = mem_ap_read_atomic_u32(dap,
- component_base + 0xFEC, &c_pid3);
- if (retval != ERROR_OK)
- return retval;
- c_pid3 &= 0xff;
- retval = mem_ap_read_atomic_u32(dap,
- component_base + 0xFD0, &c_pid4);
- if (retval != ERROR_OK)
- return retval;
- c_pid4 &= 0xff;
-
- retval = mem_ap_read_atomic_u32(dap,
- component_base + 0xFF0, &c_cid0);
- if (retval != ERROR_OK)
- return retval;
- c_cid0 &= 0xff;
- retval = mem_ap_read_atomic_u32(dap,
- component_base + 0xFF4, &c_cid1);
- if (retval != ERROR_OK)
- return retval;
- c_cid1 &= 0xff;
- retval = mem_ap_read_atomic_u32(dap,
- component_base + 0xFF8, &c_cid2);
- if (retval != ERROR_OK)
- return retval;
- c_cid2 &= 0xff;
- retval = mem_ap_read_atomic_u32(dap,
- component_base + 0xFFC, &c_cid3);
- if (retval != ERROR_OK)
- return retval;
- c_cid3 &= 0xff;
-
-
- command_print(cmd_ctx,
- "\t\tComponent base address 0x%" PRIx32
- ", start address 0x%" PRIx32,
- component_base,
- /* component may take multiple 4K pages */
- component_base - 0x1000*(c_pid4 >> 4));
- command_print(cmd_ctx, "\t\tComponent class is 0x%x, %s",
- (int) (c_cid1 >> 4) & 0xf,
- /* See ARM IHI 0029B Table 3-3 */
- class_description[(c_cid1 >> 4) & 0xf]);
-
- /* CoreSight component? */
- if (((c_cid1 >> 4) & 0x0f) == 9) {
- uint32_t devtype;
- unsigned minor;
- char *major = "Reserved", *subtype = "Reserved";
-
- retval = mem_ap_read_atomic_u32(dap,
- (component_base & 0xfffff000) | 0xfcc,
- &devtype);
- if (retval != ERROR_OK)
- return retval;
- minor = (devtype >> 4) & 0x0f;
- switch (devtype & 0x0f) {
- case 0:
- major = "Miscellaneous";
- switch (minor) {
- case 0:
- subtype = "other";
- break;
- case 4:
- subtype = "Validation component";
- break;
- }
- break;
- case 1:
- major = "Trace Sink";
- switch (minor) {
- case 0:
- subtype = "other";
- break;
- case 1:
- subtype = "Port";
- break;
- case 2:
- subtype = "Buffer";
- break;
- }
- break;
- case 2:
- major = "Trace Link";
- switch (minor) {
- case 0:
- subtype = "other";
- break;
- case 1:
- subtype = "Funnel, router";
- break;
- case 2:
- subtype = "Filter";
- break;
- case 3:
- subtype = "FIFO, buffer";
- break;
- }
- break;
- case 3:
- major = "Trace Source";
- switch (minor) {
- case 0:
- subtype = "other";
- break;
- case 1:
- subtype = "Processor";
- break;
- case 2:
- subtype = "DSP";
- break;
- case 3:
- subtype = "Engine/Coprocessor";
- break;
- case 4:
- subtype = "Bus";
- break;
- }
- break;
- case 4:
- major = "Debug Control";
- switch (minor) {
- case 0:
- subtype = "other";
- break;
- case 1:
- subtype = "Trigger Matrix";
- break;
- case 2:
- subtype = "Debug Auth";
- break;
- }
- break;
- case 5:
- major = "Debug Logic";
- switch (minor) {
- case 0:
- subtype = "other";
- break;
- case 1:
- subtype = "Processor";
- break;
- case 2:
- subtype = "DSP";
- break;
- case 3:
- subtype = "Engine/Coprocessor";
- break;
- }
- break;
- }
- command_print(cmd_ctx, "\t\tType is 0x%2.2x, %s, %s",
- (unsigned) (devtype & 0xff),
- major, subtype);
- /* REVISIT also show 0xfc8 DevId */
- }
-
- if (!is_dap_cid_ok(cid3, cid2, cid1, cid0))
- command_print(cmd_ctx,
- "\t\tCID3 0%2.2x"
- ", CID2 0%2.2x"
- ", CID1 0%2.2x"
- ", CID0 0%2.2x",
- (int) c_cid3,
- (int) c_cid2,
- (int)c_cid1,
- (int)c_cid0);
- command_print(cmd_ctx,
- "\t\tPeripheral ID[4..0] = hex "
- "%2.2x %2.2x %2.2x %2.2x %2.2x",
- (int) c_pid4, (int) c_pid3, (int) c_pid2,
- (int) c_pid1, (int) c_pid0);
-
- /* Part number interpretations are from Cortex
- * core specs, the CoreSight components TRM
- * (ARM DDI 0314H), CoreSight System Design
- * Guide (ARM DGI 0012D) and ETM specs; also
- * from chip observation (e.g. TI SDTI).
- */
- part_num = (c_pid0 & 0xff);
- part_num |= (c_pid1 & 0x0f) << 8;
- switch (part_num) {
- case 0x000:
- type = "Cortex-M3 NVIC";
- full = "(Interrupt Controller)";
- break;
- case 0x001:
- type = "Cortex-M3 ITM";
- full = "(Instrumentation Trace Module)";
- break;
- case 0x002:
- type = "Cortex-M3 DWT";
- full = "(Data Watchpoint and Trace)";
- break;
- case 0x003:
- type = "Cortex-M3 FBP";
- full = "(Flash Patch and Breakpoint)";
- break;
- case 0x00d:
- type = "CoreSight ETM11";
- full = "(Embedded Trace)";
- break;
- // case 0x113: what?
- case 0x120: /* from OMAP3 memmap */
- type = "TI SDTI";
- full = "(System Debug Trace Interface)";
- break;
- case 0x343: /* from OMAP3 memmap */
- type = "TI DAPCTL";
- full = "";
- break;
- case 0x906:
- type = "Coresight CTI";
- full = "(Cross Trigger)";
- break;
- case 0x907:
- type = "Coresight ETB";
- full = "(Trace Buffer)";
- break;
- case 0x908:
- type = "Coresight CSTF";
- full = "(Trace Funnel)";
- break;
- case 0x910:
- type = "CoreSight ETM9";
- full = "(Embedded Trace)";
- break;
- case 0x912:
- type = "Coresight TPIU";
- full = "(Trace Port Interface Unit)";
- break;
- case 0x921:
- type = "Cortex-A8 ETM";
- full = "(Embedded Trace)";
- break;
- case 0x922:
- type = "Cortex-A8 CTI";
- full = "(Cross Trigger)";
- break;
- case 0x923:
- type = "Cortex-M3 TPIU";
- full = "(Trace Port Interface Unit)";
- break;
- case 0x924:
- type = "Cortex-M3 ETM";
- full = "(Embedded Trace)";
- break;
- case 0x930:
- type = "Cortex-R4 ETM";
- full = "(Embedded Trace)";
- break;
- case 0xc08:
- type = "Cortex-A8 Debug";
- full = "(Debug Unit)";
- break;
- default:
- type = "-*- unrecognized -*-";
- full = "";
- break;
- }
- command_print(cmd_ctx, "\t\tPart is %s %s",
- type, full);
- }
- else
- {
- if (romentry)
- command_print(cmd_ctx, "\t\tComponent not present");
- else
- command_print(cmd_ctx, "\t\tEnd of ROM table");
- }
- entry_offset += 4;
- } while (romentry > 0);
- }
- else
- {
- command_print(cmd_ctx, "\tNo ROM table present");
- }
- dap_ap_select(dap, ap_old);
+ return ERROR_OK;
+}
+int adiv5_jim_mem_ap_spot_configure(struct adiv5_mem_ap_spot *cfg,
+ struct jim_getopt_info *goi)
+{
+ return adiv5_jim_spot_configure(goi, &cfg->dap, &cfg->ap_num, &cfg->base);
+}
+
+int adiv5_mem_ap_spot_init(struct adiv5_mem_ap_spot *p)
+{
+ p->dap = NULL;
+ p->ap_num = DP_APSEL_INVALID;
+ p->base = 0;
return ERROR_OK;
}
COMMAND_HANDLER(handle_dap_info_command)
{
- struct target *target = get_current_target(CMD_CTX);
- struct arm *arm = target_to_arm(target);
- struct adiv5_dap *dap = arm->dap;
- uint32_t apsel;
+ struct adiv5_dap *dap = adiv5_get_dap(CMD_DATA);
+ uint64_t apsel;
switch (CMD_ARGC) {
case 0:
apsel = dap->apsel;
break;
case 1:
- COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], apsel);
+ if (!strcmp(CMD_ARGV[0], "root")) {
+ if (!is_adiv6(dap)) {
+ command_print(CMD, "Option \"root\" not allowed with ADIv5 DAP");
+ return ERROR_COMMAND_ARGUMENT_INVALID;
+ }
+ int retval = adiv6_dap_read_baseptr(CMD, dap, &apsel);
+ if (retval != ERROR_OK) {
+ command_print(CMD, "Failed reading DAP baseptr");
+ return retval;
+ }
+ break;
+ }
+ COMMAND_PARSE_NUMBER(u64, CMD_ARGV[0], apsel);
+ if (!is_ap_num_valid(dap, apsel)) {
+ command_print(CMD, "Invalid AP number");
+ return ERROR_COMMAND_ARGUMENT_INVALID;
+ }
break;
default:
return ERROR_COMMAND_SYNTAX_ERROR;
}
- return dap_info_command(CMD_CTX, dap, apsel);
+ struct adiv5_ap *ap = dap_get_ap(dap, apsel);
+ if (!ap) {
+ command_print(CMD, "Cannot get AP");
+ return ERROR_FAIL;
+ }
+
+ int retval = dap_info_command(CMD, ap);
+ dap_put_ap(ap);
+ return retval;
}
COMMAND_HANDLER(dap_baseaddr_command)
{
- struct target *target = get_current_target(CMD_CTX);
- struct arm *arm = target_to_arm(target);
- struct adiv5_dap *dap = arm->dap;
-
- uint32_t apsel, baseaddr;
+ struct adiv5_dap *dap = adiv5_get_dap(CMD_DATA);
+ uint64_t apsel;
+ uint32_t baseaddr_lower, baseaddr_upper;
+ struct adiv5_ap *ap;
+ target_addr_t baseaddr;
int retval;
+ baseaddr_upper = 0;
+
switch (CMD_ARGC) {
case 0:
apsel = dap->apsel;
break;
case 1:
- COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], apsel);
- /* AP address is in bits 31:24 of DP_SELECT */
- if (apsel >= 256)
- return ERROR_COMMAND_SYNTAX_ERROR;
+ COMMAND_PARSE_NUMBER(u64, CMD_ARGV[0], apsel);
+ if (!is_ap_num_valid(dap, apsel)) {
+ command_print(CMD, "Invalid AP number");
+ return ERROR_COMMAND_ARGUMENT_INVALID;
+ }
break;
default:
return ERROR_COMMAND_SYNTAX_ERROR;
}
- dap_ap_select(dap, apsel);
-
/* NOTE: assumes we're talking to a MEM-AP, which
* has a base address. There are other kinds of AP,
* though they're not common for now. This should
* use the ID register to verify it's a MEM-AP.
*/
- retval = dap_queue_ap_read(dap, AP_REG_BASE, &baseaddr);
- if (retval != ERROR_OK)
- return retval;
- retval = dap_run(dap);
+
+ ap = dap_get_ap(dap, apsel);
+ if (!ap) {
+ command_print(CMD, "Cannot get AP");
+ return ERROR_FAIL;
+ }
+
+ retval = dap_queue_ap_read(ap, MEM_AP_REG_BASE(dap), &baseaddr_lower);
+
+ if (retval == ERROR_OK && ap->cfg_reg == MEM_AP_REG_CFG_INVALID)
+ retval = dap_queue_ap_read(ap, MEM_AP_REG_CFG(dap), &ap->cfg_reg);
+
+ if (retval == ERROR_OK && (ap->cfg_reg == MEM_AP_REG_CFG_INVALID || is_64bit_ap(ap))) {
+ /* MEM_AP_REG_BASE64 is defined as 'RES0'; can be read and then ignored on 32 bits AP */
+ retval = dap_queue_ap_read(ap, MEM_AP_REG_BASE64(dap), &baseaddr_upper);
+ }
+
+ if (retval == ERROR_OK)
+ retval = dap_run(dap);
+ dap_put_ap(ap);
if (retval != ERROR_OK)
return retval;
- command_print(CMD_CTX, "0x%8.8" PRIx32, baseaddr);
+ if (is_64bit_ap(ap)) {
+ baseaddr = (((target_addr_t)baseaddr_upper) << 32) | baseaddr_lower;
+ command_print(CMD, "0x%016" PRIx64, baseaddr);
+ } else
+ command_print(CMD, "0x%08" PRIx32, baseaddr_lower);
- return retval;
+ return ERROR_OK;
}
COMMAND_HANDLER(dap_memaccess_command)
{
- struct target *target = get_current_target(CMD_CTX);
- struct arm *arm = target_to_arm(target);
- struct adiv5_dap *dap = arm->dap;
-
+ struct adiv5_dap *dap = adiv5_get_dap(CMD_DATA);
+ struct adiv5_ap *ap;
uint32_t memaccess_tck;
switch (CMD_ARGC) {
case 0:
- memaccess_tck = dap->memaccess_tck;
+ ap = dap_get_ap(dap, dap->apsel);
+ if (!ap) {
+ command_print(CMD, "Cannot get AP");
+ return ERROR_FAIL;
+ }
+ memaccess_tck = ap->memaccess_tck;
break;
case 1:
+ ap = dap_get_config_ap(dap, dap->apsel);
+ if (!ap) {
+ command_print(CMD, "Cannot get AP");
+ return ERROR_FAIL;
+ }
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], memaccess_tck);
+ ap->memaccess_tck = memaccess_tck;
break;
default:
return ERROR_COMMAND_SYNTAX_ERROR;
}
- dap->memaccess_tck = memaccess_tck;
- command_print(CMD_CTX, "memory bus access delay set to %" PRIi32 " tck",
- dap->memaccess_tck);
+ dap_put_ap(ap);
+
+ command_print(CMD, "memory bus access delay set to %" PRIu32 " tck",
+ memaccess_tck);
return ERROR_OK;
}
COMMAND_HANDLER(dap_apsel_command)
{
- struct target *target = get_current_target(CMD_CTX);
- struct arm *arm = target_to_arm(target);
- struct adiv5_dap *dap = arm->dap;
-
- uint32_t apsel, apid;
- int retval;
+ struct adiv5_dap *dap = adiv5_get_dap(CMD_DATA);
+ uint64_t apsel;
switch (CMD_ARGC) {
case 0:
- apsel = 0;
- break;
+ command_print(CMD, "0x%" PRIx64, dap->apsel);
+ return ERROR_OK;
case 1:
- COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], apsel);
- /* AP address is in bits 31:24 of DP_SELECT */
- if (apsel >= 256)
- return ERROR_COMMAND_SYNTAX_ERROR;
+ COMMAND_PARSE_NUMBER(u64, CMD_ARGV[0], apsel);
+ if (!is_ap_num_valid(dap, apsel)) {
+ command_print(CMD, "Invalid AP number");
+ return ERROR_COMMAND_ARGUMENT_INVALID;
+ }
break;
default:
return ERROR_COMMAND_SYNTAX_ERROR;
}
dap->apsel = apsel;
- dap_ap_select(dap, apsel);
+ return ERROR_OK;
+}
- retval = dap_queue_ap_read(dap, AP_REG_IDR, &apid);
- if (retval != ERROR_OK)
- return retval;
- retval = dap_run(dap);
- if (retval != ERROR_OK)
- return retval;
+COMMAND_HANDLER(dap_apcsw_command)
+{
+ struct adiv5_dap *dap = adiv5_get_dap(CMD_DATA);
+ struct adiv5_ap *ap;
+ uint32_t csw_val, csw_mask;
- command_print(CMD_CTX, "ap %" PRIi32 " selected, identification register 0x%8.8" PRIx32,
- apsel, apid);
+ switch (CMD_ARGC) {
+ case 0:
+ ap = dap_get_ap(dap, dap->apsel);
+ if (!ap) {
+ command_print(CMD, "Cannot get AP");
+ return ERROR_FAIL;
+ }
+ command_print(CMD, "AP#0x%" PRIx64 " selected, csw 0x%8.8" PRIx32,
+ dap->apsel, ap->csw_default);
+ break;
+ case 1:
+ if (strcmp(CMD_ARGV[0], "default") == 0)
+ csw_val = CSW_AHB_DEFAULT;
+ else
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], csw_val);
- return retval;
+ if (csw_val & (CSW_SIZE_MASK | CSW_ADDRINC_MASK)) {
+ LOG_ERROR("CSW value cannot include 'Size' and 'AddrInc' bit-fields");
+ return ERROR_COMMAND_ARGUMENT_INVALID;
+ }
+ ap = dap_get_config_ap(dap, dap->apsel);
+ if (!ap) {
+ command_print(CMD, "Cannot get AP");
+ return ERROR_FAIL;
+ }
+ ap->csw_default = csw_val;
+ break;
+ case 2:
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], csw_val);
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], csw_mask);
+ if (csw_mask & (CSW_SIZE_MASK | CSW_ADDRINC_MASK)) {
+ LOG_ERROR("CSW mask cannot include 'Size' and 'AddrInc' bit-fields");
+ return ERROR_COMMAND_ARGUMENT_INVALID;
+ }
+ ap = dap_get_config_ap(dap, dap->apsel);
+ if (!ap) {
+ command_print(CMD, "Cannot get AP");
+ return ERROR_FAIL;
+ }
+ ap->csw_default = (ap->csw_default & ~csw_mask) | (csw_val & csw_mask);
+ break;
+ default:
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+ dap_put_ap(ap);
+
+ return ERROR_OK;
}
+
+
COMMAND_HANDLER(dap_apid_command)
{
- struct target *target = get_current_target(CMD_CTX);
- struct arm *arm = target_to_arm(target);
- struct adiv5_dap *dap = arm->dap;
-
- uint32_t apsel, apid;
+ struct adiv5_dap *dap = adiv5_get_dap(CMD_DATA);
+ uint64_t apsel;
+ uint32_t apid;
int retval;
switch (CMD_ARGC) {
apsel = dap->apsel;
break;
case 1:
- COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], apsel);
- /* AP address is in bits 31:24 of DP_SELECT */
- if (apsel >= 256)
- return ERROR_COMMAND_SYNTAX_ERROR;
+ COMMAND_PARSE_NUMBER(u64, CMD_ARGV[0], apsel);
+ if (!is_ap_num_valid(dap, apsel)) {
+ command_print(CMD, "Invalid AP number");
+ return ERROR_COMMAND_ARGUMENT_INVALID;
+ }
break;
default:
return ERROR_COMMAND_SYNTAX_ERROR;
}
- dap_ap_select(dap, apsel);
+ struct adiv5_ap *ap = dap_get_ap(dap, apsel);
+ if (!ap) {
+ command_print(CMD, "Cannot get AP");
+ return ERROR_FAIL;
+ }
+ retval = dap_queue_ap_read(ap, AP_REG_IDR(dap), &apid);
+ if (retval != ERROR_OK) {
+ dap_put_ap(ap);
+ return retval;
+ }
+ retval = dap_run(dap);
+ dap_put_ap(ap);
+ if (retval != ERROR_OK)
+ return retval;
+
+ command_print(CMD, "0x%8.8" PRIx32, apid);
+
+ return retval;
+}
+
+COMMAND_HANDLER(dap_apreg_command)
+{
+ struct adiv5_dap *dap = adiv5_get_dap(CMD_DATA);
+ uint64_t apsel;
+ uint32_t reg, value;
+ int retval;
+
+ if (CMD_ARGC < 2 || CMD_ARGC > 3)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ COMMAND_PARSE_NUMBER(u64, CMD_ARGV[0], apsel);
+ if (!is_ap_num_valid(dap, apsel)) {
+ command_print(CMD, "Invalid AP number");
+ return ERROR_COMMAND_ARGUMENT_INVALID;
+ }
+
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], reg);
+ if (is_adiv6(dap)) {
+ if (reg >= 4096 || (reg & 3)) {
+ command_print(CMD, "Invalid reg value (should be less than 4096 and 4 bytes aligned)");
+ return ERROR_COMMAND_ARGUMENT_INVALID;
+ }
+ } else { /* ADI version 5 */
+ if (reg >= 256 || (reg & 3)) {
+ command_print(CMD, "Invalid reg value (should be less than 256 and 4 bytes aligned)");
+ return ERROR_COMMAND_ARGUMENT_INVALID;
+ }
+ }
+
+ struct adiv5_ap *ap = dap_get_ap(dap, apsel);
+ if (!ap) {
+ command_print(CMD, "Cannot get AP");
+ return ERROR_FAIL;
+ }
+
+ if (CMD_ARGC == 3) {
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], value);
+ /* see if user supplied register address is a match for the CSW or TAR register */
+ if (reg == MEM_AP_REG_CSW(dap)) {
+ ap->csw_value = 0; /* invalid, in case write fails */
+ retval = dap_queue_ap_write(ap, reg, value);
+ if (retval == ERROR_OK)
+ ap->csw_value = value;
+ } else if (reg == MEM_AP_REG_TAR(dap)) {
+ retval = dap_queue_ap_write(ap, reg, value);
+ if (retval == ERROR_OK)
+ ap->tar_value = (ap->tar_value & ~0xFFFFFFFFull) | value;
+ else {
+ /* To track independent writes to TAR and TAR64, two tar_valid flags */
+ /* should be used. To keep it simple, tar_valid is only invalidated on a */
+ /* write fail. This approach causes a later re-write of the TAR and TAR64 */
+ /* if tar_valid is false. */
+ ap->tar_valid = false;
+ }
+ } else if (reg == MEM_AP_REG_TAR64(dap)) {
+ retval = dap_queue_ap_write(ap, reg, value);
+ if (retval == ERROR_OK)
+ ap->tar_value = (ap->tar_value & 0xFFFFFFFFull) | (((target_addr_t)value) << 32);
+ else {
+ /* See above comment for the MEM_AP_REG_TAR failed write case */
+ ap->tar_valid = false;
+ }
+ } else {
+ retval = dap_queue_ap_write(ap, reg, value);
+ }
+ } else {
+ retval = dap_queue_ap_read(ap, reg, &value);
+ }
+ if (retval == ERROR_OK)
+ retval = dap_run(dap);
+
+ dap_put_ap(ap);
- retval = dap_queue_ap_read(dap, AP_REG_IDR, &apid);
if (retval != ERROR_OK)
return retval;
- retval = dap_run(dap);
+
+ if (CMD_ARGC == 2)
+ command_print(CMD, "0x%08" PRIx32, value);
+
+ return retval;
+}
+
+COMMAND_HANDLER(dap_dpreg_command)
+{
+ struct adiv5_dap *dap = adiv5_get_dap(CMD_DATA);
+ uint32_t reg, value;
+ int retval;
+
+ if (CMD_ARGC < 1 || CMD_ARGC > 2)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], reg);
+ if (reg >= 256 || (reg & 3)) {
+ command_print(CMD, "Invalid reg value (should be less than 256 and 4 bytes aligned)");
+ return ERROR_COMMAND_ARGUMENT_INVALID;
+ }
+
+ if (CMD_ARGC == 2) {
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], value);
+ retval = dap_queue_dp_write(dap, reg, value);
+ } else {
+ retval = dap_queue_dp_read(dap, reg, &value);
+ }
+ if (retval == ERROR_OK)
+ retval = dap_run(dap);
+
if (retval != ERROR_OK)
return retval;
- command_print(CMD_CTX, "0x%8.8" PRIx32, apid);
+ if (CMD_ARGC == 1)
+ command_print(CMD, "0x%08" PRIx32, value);
return retval;
}
-static const struct command_registration dap_commands[] = {
+COMMAND_HANDLER(dap_ti_be_32_quirks_command)
+{
+ struct adiv5_dap *dap = adiv5_get_dap(CMD_DATA);
+ return CALL_COMMAND_HANDLER(handle_command_parse_bool, &dap->ti_be_32_quirks,
+ "TI BE-32 quirks mode");
+}
+
+const struct command_registration dap_instance_commands[] = {
{
.name = "info",
.handler = handle_dap_info_command,
.mode = COMMAND_EXEC,
- .help = "display ROM table for MEM-AP "
- "(default currently selected AP)",
- .usage = "[ap_num]",
+ .help = "display ROM table for specified MEM-AP (default currently selected AP) "
+ "or the ADIv6 root ROM table",
+ .usage = "[ap_num | 'root']",
},
{
.name = "apsel",
.handler = dap_apsel_command,
- .mode = COMMAND_EXEC,
+ .mode = COMMAND_ANY,
.help = "Set the currently selected AP (default 0) "
"and display the result",
.usage = "[ap_num]",
},
+ {
+ .name = "apcsw",
+ .handler = dap_apcsw_command,
+ .mode = COMMAND_ANY,
+ .help = "Set CSW default bits",
+ .usage = "[value [mask]]",
+ },
+
{
.name = "apid",
.handler = dap_apid_command,
"(default currently selected AP)",
.usage = "[ap_num]",
},
+ {
+ .name = "apreg",
+ .handler = dap_apreg_command,
+ .mode = COMMAND_EXEC,
+ .help = "read/write a register from AP "
+ "(reg is byte address of a word register, like 0 4 8...)",
+ .usage = "ap_num reg [value]",
+ },
+ {
+ .name = "dpreg",
+ .handler = dap_dpreg_command,
+ .mode = COMMAND_EXEC,
+ .help = "read/write a register from DP "
+ "(reg is byte address (bank << 4 | reg) of a word register, like 0 4 8...)",
+ .usage = "reg [value]",
+ },
{
.name = "baseaddr",
.handler = dap_baseaddr_command,
"bus access [0-255]",
.usage = "[cycles]",
},
- COMMAND_REGISTRATION_DONE
-};
-
-const struct command_registration dap_command_handlers[] = {
{
- .name = "dap",
- .mode = COMMAND_EXEC,
- .help = "DAP command group",
- .chain = dap_commands,
+ .name = "ti_be_32_quirks",
+ .handler = dap_ti_be_32_quirks_command,
+ .mode = COMMAND_CONFIG,
+ .help = "set/get quirks mode for TI TMS450/TMS570 processors",
+ .usage = "[enable]",
},
COMMAND_REGISTRATION_DONE
};
-
-
projects / fw / openocd / blobdiff