* Copyright (C) 2005 by Dominic Rath *
* Dominic.Rath@gmx.de *
* *
+ * Copyright (C) 2007,2008 Øyvind Harboe *
+ * oyvind.harboe@zylin.com *
+ * *
+ * Copyright (C) 2008 by Spencer Oliver *
+ * spen@spen-soft.co.uk *
+ * *
+ * Copyright (C) 2008 by Hongtao Zheng *
+ * hontor@126.com *
+ * *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
#include "config.h"
#endif
-#include "replacements.h"
-
#include "embeddedice.h"
-#include "target.h"
#include "target_request.h"
-#include "armv4_5.h"
-#include "arm_jtag.h"
-#include "jtag.h"
-#include "log.h"
#include "arm7_9_common.h"
-#include "breakpoints.h"
-
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
+#include "time_support.h"
+#include "arm_simulator.h"
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/time.h>
-#include <errno.h>
int arm7_9_debug_entry(target_t *target);
int arm7_9_enable_sw_bkpts(struct target_s *target);
int handle_arm7_9_write_xpsr_im8_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
int handle_arm7_9_read_core_reg_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
int handle_arm7_9_write_core_reg_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int handle_arm7_9_sw_bkpts_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int handle_arm7_9_force_hw_bkpts_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
int handle_arm7_9_dbgrq_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
int handle_arm7_9_fast_memory_access_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
int handle_arm7_9_dcc_downloads_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
int handle_arm7_9_etm_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-int arm7_9_reinit_embeddedice(target_t *target)
+/**
+ * Clear watchpoints for an ARM7/9 target.
+ *
+ * @param arm7_9 Pointer to the common struct for an ARM7/9 target
+ * @return JTAG error status after executing queue
+ */
+static int arm7_9_clear_watchpoints(arm7_9_common_t *arm7_9)
{
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
-
- breakpoint_t *breakpoint = target->breakpoints;
-
- arm7_9->wp_available = 2;
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_VALUE], 0x0);
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_VALUE], 0x0);
+ arm7_9->sw_breakpoints_added = 0;
arm7_9->wp0_used = 0;
- arm7_9->wp1_used = 0;
-
- /* mark all hardware breakpoints as unset */
- while (breakpoint)
+ arm7_9->wp1_used = arm7_9->wp1_used_default;
+ arm7_9->wp_available = arm7_9->wp_available_max;
+
+ return jtag_execute_queue();
+}
+
+/**
+ * Assign a watchpoint to one of the two available hardware comparators in an
+ * ARM7 or ARM9 target.
+ *
+ * @param arm7_9 Pointer to the common struct for an ARM7/9 target
+ * @param breakpoint Pointer to the breakpoint to be used as a watchpoint
+ */
+static void arm7_9_assign_wp(arm7_9_common_t *arm7_9, breakpoint_t *breakpoint)
+{
+ if (!arm7_9->wp0_used)
{
- if (breakpoint->type == BKPT_HARD)
- {
- breakpoint->set = 0;
- }
- breakpoint = breakpoint->next;
+ arm7_9->wp0_used = 1;
+ breakpoint->set = 1;
+ arm7_9->wp_available--;
}
-
- if (arm7_9->sw_bkpts_enabled && arm7_9->sw_bkpts_use_wp)
+ else if (!arm7_9->wp1_used)
{
- arm7_9->sw_bkpts_enabled = 0;
- arm7_9_enable_sw_bkpts(target);
+ arm7_9->wp1_used = 1;
+ breakpoint->set = 2;
+ arm7_9->wp_available--;
+ }
+ else
+ {
+ LOG_ERROR("BUG: no hardware comparator available");
}
-
- return ERROR_OK;
}
-/* set things up after a reset / on startup */
+/**
+ * Setup an ARM7/9 target's embedded ICE registers for software breakpoints.
+ *
+ * @param arm7_9 Pointer to common struct for ARM7/9 targets
+ * @return Error codes if there is a problem finding a watchpoint or the result
+ * of executing the JTAG queue
+ */
+static int arm7_9_set_software_breakpoints(arm7_9_common_t *arm7_9)
+{
+ if (arm7_9->sw_breakpoints_added)
+ {
+ return ERROR_OK;
+ }
+ if (arm7_9->wp_available < 1)
+ {
+ LOG_WARNING("can't enable sw breakpoints with no watchpoint unit available");
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ }
+ arm7_9->wp_available--;
+
+ /* pick a breakpoint unit */
+ if (!arm7_9->wp0_used)
+ {
+ arm7_9->sw_breakpoints_added=1;
+ arm7_9->wp0_used = 3;
+ } else if (!arm7_9->wp1_used)
+ {
+ arm7_9->sw_breakpoints_added=2;
+ arm7_9->wp1_used = 3;
+ }
+ else
+ {
+ LOG_ERROR("BUG: both watchpoints used, but wp_available >= 1");
+ return ERROR_FAIL;
+ }
+
+ if (arm7_9->sw_breakpoints_added==1)
+ {
+ embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_DATA_VALUE], arm7_9->arm_bkpt);
+ embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_DATA_MASK], 0x0);
+ embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_ADDR_MASK], 0xffffffffu);
+ embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_MASK], ~EICE_W_CTRL_nOPC & 0xff);
+ embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_VALUE], EICE_W_CTRL_ENABLE);
+ }
+ else if (arm7_9->sw_breakpoints_added==2)
+ {
+ embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_DATA_VALUE], arm7_9->arm_bkpt);
+ embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_DATA_MASK], 0x0);
+ embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_ADDR_MASK], 0xffffffffu);
+ embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_MASK], ~EICE_W_CTRL_nOPC & 0xff);
+ embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_VALUE], EICE_W_CTRL_ENABLE);
+ }
+ else
+ {
+ LOG_ERROR("BUG: both watchpoints used, but wp_available >= 1");
+ return ERROR_FAIL;
+ }
+
+ return jtag_execute_queue();
+}
+
+/**
+ * Setup the common pieces for an ARM7/9 target after reset or on startup.
+ *
+ * @param target Pointer to an ARM7/9 target to setup
+ * @return Result of clearing the watchpoints on the target
+ */
int arm7_9_setup(target_t *target)
{
- /* a test-logic reset have occured
- * the EmbeddedICE registers have been reset
- * hardware breakpoints have been cleared
- */
- return arm7_9_reinit_embeddedice(target);
+ armv4_5_common_t *armv4_5 = target->arch_info;
+ arm7_9_common_t *arm7_9 = armv4_5->arch_info;
+
+ return arm7_9_clear_watchpoints(arm7_9);
}
+/**
+ * Retrieves the architecture information pointers for ARMv4/5 and ARM7/9
+ * targets. A return of ERROR_OK signifies that the target is a valid target
+ * and that the pointers have been set properly.
+ *
+ * @param target Pointer to the target device to get the pointers from
+ * @param armv4_5_p Pointer to be filled in with the common struct for ARMV4/5
+ * targets
+ * @param arm7_9_p Pointer to be filled in with the common struct for ARM7/9
+ * targets
+ * @return ERROR_OK if successful
+ */
int arm7_9_get_arch_pointers(target_t *target, armv4_5_common_t **armv4_5_p, arm7_9_common_t **arm7_9_p)
{
armv4_5_common_t *armv4_5 = target->arch_info;
arm7_9_common_t *arm7_9 = armv4_5->arch_info;
-
+
if (armv4_5->common_magic != ARMV4_5_COMMON_MAGIC)
{
return -1;
}
-
+
if (arm7_9->common_magic != ARM7_9_COMMON_MAGIC)
{
return -1;
}
-
+
*armv4_5_p = armv4_5;
*arm7_9_p = arm7_9;
-
+
return ERROR_OK;
}
+/**
+ * Set either a hardware or software breakpoint on an ARM7/9 target. The
+ * breakpoint is set up even if it is already set. Some actions, e.g. reset,
+ * might have erased the values in Embedded ICE.
+ *
+ * @param target Pointer to the target device to set the breakpoints on
+ * @param breakpoint Pointer to the breakpoint to be set
+ * @return For hardware breakpoints, this is the result of executing the JTAG
+ * queue. For software breakpoints, this will be the status of the
+ * required memory reads and writes
+ */
int arm7_9_set_breakpoint(struct target_s *target, breakpoint_t *breakpoint)
{
armv4_5_common_t *armv4_5 = target->arch_info;
arm7_9_common_t *arm7_9 = armv4_5->arch_info;
-
+ int retval=ERROR_OK;
+
if (target->state != TARGET_HALTED)
{
LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
-
- if (arm7_9->force_hw_bkpts)
- breakpoint->type = BKPT_HARD;
-
- if (breakpoint->set)
- {
- LOG_WARNING("breakpoint already set");
- return ERROR_OK;
- }
if (breakpoint->type == BKPT_HARD)
{
/* either an ARM (4 byte) or Thumb (2 byte) breakpoint */
- u32 mask = (breakpoint->length == 4) ? 0x3u : 0x1u;
- if (!arm7_9->wp0_used)
+ uint32_t mask = (breakpoint->length == 4) ? 0x3u : 0x1u;
+
+ /* reassign a hw breakpoint */
+ if (breakpoint->set==0)
+ {
+ arm7_9_assign_wp(arm7_9, breakpoint);
+ }
+
+ if (breakpoint->set==1)
{
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_ADDR_VALUE], breakpoint->address);
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_ADDR_MASK], mask);
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_DATA_MASK], 0xffffffffu);
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_MASK], ~EICE_W_CTRL_nOPC & 0xff);
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_VALUE], EICE_W_CTRL_ENABLE);
-
- jtag_execute_queue();
- arm7_9->wp0_used = 1;
- breakpoint->set = 1;
}
- else if (!arm7_9->wp1_used)
+ else if (breakpoint->set==2)
{
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_ADDR_VALUE], breakpoint->address);
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_ADDR_MASK], mask);
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_DATA_MASK], 0xffffffffu);
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_MASK], ~EICE_W_CTRL_nOPC & 0xff);
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_VALUE], EICE_W_CTRL_ENABLE);
-
- jtag_execute_queue();
- arm7_9->wp1_used = 1;
- breakpoint->set = 2;
}
else
{
LOG_ERROR("BUG: no hardware comparator available");
return ERROR_OK;
}
+
+ retval=jtag_execute_queue();
}
else if (breakpoint->type == BKPT_SOFT)
{
+ if ((retval=arm7_9_set_software_breakpoints(arm7_9))!=ERROR_OK)
+ return retval;
+
+ /* did we already set this breakpoint? */
+ if (breakpoint->set)
+ return ERROR_OK;
+
if (breakpoint->length == 4)
{
- u32 verify = 0xffffffff;
+ uint32_t verify = 0xffffffff;
/* keep the original instruction in target endianness */
- target->type->read_memory(target, breakpoint->address, 4, 1, breakpoint->orig_instr);
+ if ((retval = target_read_memory(target, breakpoint->address, 4, 1, breakpoint->orig_instr)) != ERROR_OK)
+ {
+ return retval;
+ }
/* write the breakpoint instruction in target endianness (arm7_9->arm_bkpt is host endian) */
- target_write_u32(target, breakpoint->address, arm7_9->arm_bkpt);
-
- target->type->read_memory(target, breakpoint->address, 4, 1, (u8 *)&verify);
+ if ((retval = target_write_u32(target, breakpoint->address, arm7_9->arm_bkpt)) != ERROR_OK)
+ {
+ return retval;
+ }
+
+ if ((retval = target_read_u32(target, breakpoint->address, &verify)) != ERROR_OK)
+ {
+ return retval;
+ }
if (verify != arm7_9->arm_bkpt)
{
- LOG_ERROR("Unable to set 32 bit software breakpoint at address %08x - check that memory is read/writable", breakpoint->address);
+ LOG_ERROR("Unable to set 32 bit software breakpoint at address %08" PRIx32 " - check that memory is read/writable", breakpoint->address);
return ERROR_OK;
}
}
else
{
- u16 verify = 0xffff;
+ uint16_t verify = 0xffff;
/* keep the original instruction in target endianness */
- target->type->read_memory(target, breakpoint->address, 2, 1, breakpoint->orig_instr);
+ if ((retval = target_read_memory(target, breakpoint->address, 2, 1, breakpoint->orig_instr)) != ERROR_OK)
+ {
+ return retval;
+ }
/* write the breakpoint instruction in target endianness (arm7_9->thumb_bkpt is host endian) */
- target_write_u16(target, breakpoint->address, arm7_9->thumb_bkpt);
-
- target->type->read_memory(target, breakpoint->address, 2, 1, (u8 *)&verify);
+ if ((retval = target_write_u16(target, breakpoint->address, arm7_9->thumb_bkpt)) != ERROR_OK)
+ {
+ return retval;
+ }
+
+ if ((retval = target_read_u16(target, breakpoint->address, &verify)) != ERROR_OK)
+ {
+ return retval;
+ }
if (verify != arm7_9->thumb_bkpt)
{
- LOG_ERROR("Unable to set thumb software breakpoint at address %08x - check that memory is read/writable", breakpoint->address);
+ LOG_ERROR("Unable to set thumb software breakpoint at address %08" PRIx32 " - check that memory is read/writable", breakpoint->address);
return ERROR_OK;
}
}
breakpoint->set = 1;
}
- return ERROR_OK;
-
+ return retval;
}
+/**
+ * Unsets an existing breakpoint on an ARM7/9 target. If it is a hardware
+ * breakpoint, the watchpoint used will be freed and the Embedded ICE registers
+ * will be updated. Otherwise, the software breakpoint will be restored to its
+ * original instruction if it hasn't already been modified.
+ *
+ * @param target Pointer to ARM7/9 target to unset the breakpoint from
+ * @param breakpoint Pointer to breakpoint to be unset
+ * @return For hardware breakpoints, this is the result of executing the JTAG
+ * queue. For software breakpoints, this will be the status of the
+ * required memory reads and writes
+ */
int arm7_9_unset_breakpoint(struct target_s *target, breakpoint_t *breakpoint)
{
+ int retval = ERROR_OK;
+
armv4_5_common_t *armv4_5 = target->arch_info;
arm7_9_common_t *arm7_9 = armv4_5->arch_info;
-
- if (target->state != TARGET_HALTED)
- {
- LOG_WARNING("target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
if (!breakpoint->set)
{
LOG_WARNING("breakpoint not set");
return ERROR_OK;
}
-
+
if (breakpoint->type == BKPT_HARD)
{
if (breakpoint->set == 1)
{
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_VALUE], 0x0);
- jtag_execute_queue();
arm7_9->wp0_used = 0;
+ arm7_9->wp_available++;
}
else if (breakpoint->set == 2)
{
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_VALUE], 0x0);
- jtag_execute_queue();
arm7_9->wp1_used = 0;
+ arm7_9->wp_available++;
}
+ retval = jtag_execute_queue();
breakpoint->set = 0;
}
else
/* restore original instruction (kept in target endianness) */
if (breakpoint->length == 4)
{
- u32 current_instr;
+ uint32_t current_instr;
/* check that user program as not modified breakpoint instruction */
- target->type->read_memory(target, breakpoint->address, 4, 1, (u8*)¤t_instr);
+ if ((retval = target_read_memory(target, breakpoint->address, 4, 1, (uint8_t*)¤t_instr)) != ERROR_OK)
+ {
+ return retval;
+ }
if (current_instr==arm7_9->arm_bkpt)
- target->type->write_memory(target, breakpoint->address, 4, 1, breakpoint->orig_instr);
+ if ((retval = target_write_memory(target, breakpoint->address, 4, 1, breakpoint->orig_instr)) != ERROR_OK)
+ {
+ return retval;
+ }
}
else
{
- u16 current_instr;
+ uint16_t current_instr;
/* check that user program as not modified breakpoint instruction */
- target->type->read_memory(target, breakpoint->address, 2, 1, (u8*)¤t_instr);
+ if ((retval = target_read_memory(target, breakpoint->address, 2, 1, (uint8_t*)¤t_instr)) != ERROR_OK)
+ {
+ return retval;
+ }
if (current_instr==arm7_9->thumb_bkpt)
- target->type->write_memory(target, breakpoint->address, 2, 1, breakpoint->orig_instr);
+ if ((retval = target_write_memory(target, breakpoint->address, 2, 1, breakpoint->orig_instr)) != ERROR_OK)
+ {
+ return retval;
+ }
}
breakpoint->set = 0;
}
- return ERROR_OK;
+ return retval;
}
+/**
+ * Add a breakpoint to an ARM7/9 target. This makes sure that there are no
+ * dangling breakpoints and that the desired breakpoint can be added.
+ *
+ * @param target Pointer to the target ARM7/9 device to add a breakpoint to
+ * @param breakpoint Pointer to the breakpoint to be added
+ * @return An error status if there is a problem adding the breakpoint or the
+ * result of setting the breakpoint
+ */
int arm7_9_add_breakpoint(struct target_s *target, breakpoint_t *breakpoint)
{
armv4_5_common_t *armv4_5 = target->arch_info;
arm7_9_common_t *arm7_9 = armv4_5->arch_info;
-
+
if (target->state != TARGET_HALTED)
{
LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
-
- if (arm7_9->force_hw_bkpts)
- {
- LOG_DEBUG("forcing use of hardware breakpoint at address 0x%8.8x", breakpoint->address);
- breakpoint->type = BKPT_HARD;
- }
-
- if ((breakpoint->type == BKPT_SOFT) && (arm7_9->sw_bkpts_enabled == 0))
+
+ if (arm7_9->breakpoint_count==0)
{
- LOG_INFO("sw breakpoint requested, but software breakpoints not enabled");
- return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ /* make sure we don't have any dangling breakpoints. This is vital upon
+ * GDB connect/disconnect
+ */
+ arm7_9_clear_watchpoints(arm7_9);
}
-
+
if ((breakpoint->type == BKPT_HARD) && (arm7_9->wp_available < 1))
{
LOG_INFO("no watchpoint unit available for hardware breakpoint");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
-
+
if ((breakpoint->length != 2) && (breakpoint->length != 4))
{
LOG_INFO("only breakpoints of two (Thumb) or four (ARM) bytes length supported");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
-
+
if (breakpoint->type == BKPT_HARD)
- arm7_9->wp_available--;
-
- return ERROR_OK;
+ {
+ arm7_9_assign_wp(arm7_9, breakpoint);
+ }
+
+ arm7_9->breakpoint_count++;
+
+ return arm7_9_set_breakpoint(target, breakpoint);
}
+/**
+ * Removes a breakpoint from an ARM7/9 target. This will make sure there are no
+ * dangling breakpoints and updates available watchpoints if it is a hardware
+ * breakpoint.
+ *
+ * @param target Pointer to the target to have a breakpoint removed
+ * @param breakpoint Pointer to the breakpoint to be removed
+ * @return Error status if there was a problem unsetting the breakpoint or the
+ * watchpoints could not be cleared
+ */
int arm7_9_remove_breakpoint(struct target_s *target, breakpoint_t *breakpoint)
{
+ int retval = ERROR_OK;
armv4_5_common_t *armv4_5 = target->arch_info;
arm7_9_common_t *arm7_9 = armv4_5->arch_info;
-
- if (target->state != TARGET_HALTED)
- {
- LOG_WARNING("target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
-
- if (breakpoint->set)
+
+ if ((retval = arm7_9_unset_breakpoint(target, breakpoint)) != ERROR_OK)
{
- arm7_9_unset_breakpoint(target, breakpoint);
+ return retval;
}
-
+
if (breakpoint->type == BKPT_HARD)
arm7_9->wp_available++;
-
+
+ arm7_9->breakpoint_count--;
+ if (arm7_9->breakpoint_count==0)
+ {
+ /* make sure we don't have any dangling breakpoints */
+ if ((retval = arm7_9_clear_watchpoints(arm7_9)) != ERROR_OK)
+ {
+ return retval;
+ }
+ }
+
return ERROR_OK;
}
+/**
+ * Sets a watchpoint for an ARM7/9 target in one of the watchpoint units. It is
+ * considered a bug to call this function when there are no available watchpoint
+ * units.
+ *
+ * @param target Pointer to an ARM7/9 target to set a watchpoint on
+ * @param watchpoint Pointer to the watchpoint to be set
+ * @return Error status if watchpoint set fails or the result of executing the
+ * JTAG queue
+ */
int arm7_9_set_watchpoint(struct target_s *target, watchpoint_t *watchpoint)
{
+ int retval = ERROR_OK;
armv4_5_common_t *armv4_5 = target->arch_info;
arm7_9_common_t *arm7_9 = armv4_5->arch_info;
int rw_mask = 1;
- u32 mask;
-
+ uint32_t mask;
+
mask = watchpoint->length - 1;
-
+
if (target->state != TARGET_HALTED)
{
LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
-
+
if (watchpoint->rw == WPT_ACCESS)
rw_mask = 0;
else
rw_mask = 1;
-
+
if (!arm7_9->wp0_used)
{
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_ADDR_VALUE], watchpoint->address);
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_ADDR_MASK], mask);
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_DATA_MASK], watchpoint->mask);
- if( watchpoint->mask != 0xffffffffu )
+ if ( watchpoint->mask != 0xffffffffu )
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_DATA_VALUE], watchpoint->value);
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_MASK], 0xff & ~EICE_W_CTRL_nOPC & ~rw_mask);
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_VALUE], EICE_W_CTRL_ENABLE | EICE_W_CTRL_nOPC | (watchpoint->rw & 1));
- jtag_execute_queue();
+ if ((retval = jtag_execute_queue()) != ERROR_OK)
+ {
+ return retval;
+ }
watchpoint->set = 1;
arm7_9->wp0_used = 2;
}
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_ADDR_VALUE], watchpoint->address);
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_ADDR_MASK], mask);
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_DATA_MASK], watchpoint->mask);
- if( watchpoint->mask != 0xffffffffu )
+ if ( watchpoint->mask != 0xffffffffu )
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_DATA_VALUE], watchpoint->value);
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_MASK], 0xff & ~EICE_W_CTRL_nOPC & ~rw_mask);
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_VALUE], EICE_W_CTRL_ENABLE | EICE_W_CTRL_nOPC | (watchpoint->rw & 1));
- jtag_execute_queue();
+ if ((retval = jtag_execute_queue()) != ERROR_OK)
+ {
+ return retval;
+ }
watchpoint->set = 2;
arm7_9->wp1_used = 2;
- }
+ }
else
{
LOG_ERROR("BUG: no hardware comparator available");
return ERROR_OK;
}
-
+
return ERROR_OK;
}
+/**
+ * Unset an existing watchpoint and clear the used watchpoint unit.
+ *
+ * @param target Pointer to the target to have the watchpoint removed
+ * @param watchpoint Pointer to the watchpoint to be removed
+ * @return Error status while trying to unset the watchpoint or the result of
+ * executing the JTAG queue
+ */
int arm7_9_unset_watchpoint(struct target_s *target, watchpoint_t *watchpoint)
{
+ int retval = ERROR_OK;
armv4_5_common_t *armv4_5 = target->arch_info;
arm7_9_common_t *arm7_9 = armv4_5->arch_info;
-
+
if (target->state != TARGET_HALTED)
{
LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
-
+
if (!watchpoint->set)
{
LOG_WARNING("breakpoint not set");
return ERROR_OK;
}
-
+
if (watchpoint->set == 1)
{
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_VALUE], 0x0);
- jtag_execute_queue();
+ if ((retval = jtag_execute_queue()) != ERROR_OK)
+ {
+ return retval;
+ }
arm7_9->wp0_used = 0;
}
else if (watchpoint->set == 2)
{
embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_VALUE], 0x0);
- jtag_execute_queue();
+ if ((retval = jtag_execute_queue()) != ERROR_OK)
+ {
+ return retval;
+ }
arm7_9->wp1_used = 0;
}
watchpoint->set = 0;
return ERROR_OK;
}
+/**
+ * Add a watchpoint to an ARM7/9 target. If there are no watchpoint units
+ * available, an error response is returned.
+ *
+ * @param target Pointer to the ARM7/9 target to add a watchpoint to
+ * @param watchpoint Pointer to the watchpoint to be added
+ * @return Error status while trying to add the watchpoint
+ */
int arm7_9_add_watchpoint(struct target_s *target, watchpoint_t *watchpoint)
{
armv4_5_common_t *armv4_5 = target->arch_info;
arm7_9_common_t *arm7_9 = armv4_5->arch_info;
-
+
if (target->state != TARGET_HALTED)
{
LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
-
+
if (arm7_9->wp_available < 1)
{
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
-
+
if ((watchpoint->length != 1) && (watchpoint->length != 2) && (watchpoint->length != 4))
{
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
-
+
arm7_9->wp_available--;
-
+
return ERROR_OK;
}
+/**
+ * Remove a watchpoint from an ARM7/9 target. The watchpoint will be unset and
+ * the used watchpoint unit will be reopened.
+ *
+ * @param target Pointer to the target to remove a watchpoint from
+ * @param watchpoint Pointer to the watchpoint to be removed
+ * @return Result of trying to unset the watchpoint
+ */
int arm7_9_remove_watchpoint(struct target_s *target, watchpoint_t *watchpoint)
{
+ int retval = ERROR_OK;
armv4_5_common_t *armv4_5 = target->arch_info;
arm7_9_common_t *arm7_9 = armv4_5->arch_info;
-
- if (target->state != TARGET_HALTED)
- {
- LOG_WARNING("target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
-
- if (watchpoint->set)
- {
- arm7_9_unset_watchpoint(target, watchpoint);
- }
-
- arm7_9->wp_available++;
-
- return ERROR_OK;
-}
-int arm7_9_enable_sw_bkpts(struct target_s *target)
-{
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
- int retval;
-
- if (arm7_9->sw_bkpts_enabled)
- return ERROR_OK;
-
- if (arm7_9->wp_available < 1)
- {
- LOG_WARNING("can't enable sw breakpoints with no watchpoint unit available");
- return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- }
- arm7_9->wp_available--;
-
- if (!arm7_9->wp0_used)
- {
- embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_DATA_VALUE], arm7_9->arm_bkpt);
- embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_DATA_MASK], 0x0);
- embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_ADDR_MASK], 0xffffffffu);
- embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_MASK], ~EICE_W_CTRL_nOPC & 0xff);
- embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_VALUE], EICE_W_CTRL_ENABLE);
- arm7_9->sw_bkpts_enabled = 1;
- arm7_9->wp0_used = 3;
- }
- else if (!arm7_9->wp1_used)
- {
- embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_DATA_VALUE], arm7_9->arm_bkpt);
- embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_DATA_MASK], 0x0);
- embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_ADDR_MASK], 0xffffffffu);
- embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_MASK], ~EICE_W_CTRL_nOPC & 0xff);
- embeddedice_set_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_VALUE], EICE_W_CTRL_ENABLE);
- arm7_9->sw_bkpts_enabled = 2;
- arm7_9->wp1_used = 3;
- }
- else
+ if (watchpoint->set)
{
- LOG_ERROR("BUG: both watchpoints used, but wp_available >= 1");
- return ERROR_FAIL;
+ if ((retval = arm7_9_unset_watchpoint(target, watchpoint)) != ERROR_OK)
+ {
+ return retval;
+ }
}
-
- if ((retval = jtag_execute_queue()) != ERROR_OK)
- {
- LOG_ERROR("error writing EmbeddedICE registers to enable sw breakpoints");
- return ERROR_FAIL;
- };
-
- return ERROR_OK;
-}
-int arm7_9_disable_sw_bkpts(struct target_s *target)
-{
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
-
- if (!arm7_9->sw_bkpts_enabled)
- return ERROR_OK;
-
- if (arm7_9->sw_bkpts_enabled == 1)
- {
- embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_VALUE], 0x0);
- arm7_9->sw_bkpts_enabled = 0;
- arm7_9->wp0_used = 0;
- arm7_9->wp_available++;
- }
- else if (arm7_9->sw_bkpts_enabled == 2)
- {
- embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_VALUE], 0x0);
- arm7_9->sw_bkpts_enabled = 0;
- arm7_9->wp1_used = 0;
- arm7_9->wp_available++;
- }
+ arm7_9->wp_available++;
return ERROR_OK;
}
+/**
+ * Restarts the target by sending a RESTART instruction and moving the JTAG
+ * state to IDLE. This includes a timeout waiting for DBGACK and SYSCOMP to be
+ * asserted by the processor.
+ *
+ * @param target Pointer to target to issue commands to
+ * @return Error status if there is a timeout or a problem while executing the
+ * JTAG queue
+ */
int arm7_9_execute_sys_speed(struct target_s *target)
{
- int timeout;
int retval;
-
+
armv4_5_common_t *armv4_5 = target->arch_info;
arm7_9_common_t *arm7_9 = armv4_5->arch_info;
arm_jtag_t *jtag_info = &arm7_9->jtag_info;
reg_t *dbg_stat = &arm7_9->eice_cache->reg_list[EICE_DBG_STAT];
-
+
/* set RESTART instruction */
- jtag_add_end_state(TAP_RTI);
+ jtag_set_end_state(TAP_IDLE);
if (arm7_9->need_bypass_before_restart) {
arm7_9->need_bypass_before_restart = 0;
arm_jtag_set_instr(jtag_info, 0xf, NULL);
}
arm_jtag_set_instr(jtag_info, 0x4, NULL);
-
- for (timeout=0; timeout<50; timeout++)
+
+ long long then=timeval_ms();
+ int timeout;
+ while (!(timeout=((timeval_ms()-then)>1000)))
{
/* read debug status register */
embeddedice_read_reg(dbg_stat);
if ((buf_get_u32(dbg_stat->value, EICE_DBG_STATUS_DBGACK, 1))
&& (buf_get_u32(dbg_stat->value, EICE_DBG_STATUS_SYSCOMP, 1)))
break;
- usleep(100000);
+ if (debug_level>=3)
+ {
+ alive_sleep(100);
+ } else
+ {
+ keep_alive();
+ }
}
- if (timeout == 50)
+ if (timeout)
{
- LOG_ERROR("timeout waiting for SYSCOMP & DBGACK, last DBG_STATUS: %x", buf_get_u32(dbg_stat->value, 0, dbg_stat->size));
+ LOG_ERROR("timeout waiting for SYSCOMP & DBGACK, last DBG_STATUS: %" PRIx32 "", buf_get_u32(dbg_stat->value, 0, dbg_stat->size));
return ERROR_TARGET_TIMEOUT;
}
-
+
return ERROR_OK;
}
+/**
+ * Restarts the target by sending a RESTART instruction and moving the JTAG
+ * state to IDLE. This validates that DBGACK and SYSCOMP are set without
+ * waiting until they are.
+ *
+ * @param target Pointer to the target to issue commands to
+ * @return Always ERROR_OK
+ */
int arm7_9_execute_fast_sys_speed(struct target_s *target)
{
static int set=0;
- static u8 check_value[4], check_mask[4];
-
+ static uint8_t check_value[4], check_mask[4];
+
armv4_5_common_t *armv4_5 = target->arch_info;
arm7_9_common_t *arm7_9 = armv4_5->arch_info;
arm_jtag_t *jtag_info = &arm7_9->jtag_info;
reg_t *dbg_stat = &arm7_9->eice_cache->reg_list[EICE_DBG_STAT];
-
+
/* set RESTART instruction */
- jtag_add_end_state(TAP_RTI);
+ jtag_set_end_state(TAP_IDLE);
if (arm7_9->need_bypass_before_restart) {
arm7_9->need_bypass_before_restart = 0;
arm_jtag_set_instr(jtag_info, 0xf, NULL);
}
arm_jtag_set_instr(jtag_info, 0x4, NULL);
-
+
if (!set)
{
/* check for DBGACK and SYSCOMP set (others don't care) */
-
+
/* NB! These are constants that must be available until after next jtag_execute() and
- we evaluate the values upon first execution in lieu of setting up these constants
- during early setup.
- */
+ * we evaluate the values upon first execution in lieu of setting up these constants
+ * during early setup.
+ * */
buf_set_u32(check_value, 0, 32, 0x9);
buf_set_u32(check_mask, 0, 32, 0x9);
set=1;
}
-
+
/* read debug status register */
- embeddedice_read_reg_w_check(dbg_stat, check_value, check_value);
+ embeddedice_read_reg_w_check(dbg_stat, check_value, check_mask);
return ERROR_OK;
}
-int arm7_9_target_request_data(target_t *target, u32 size, u8 *buffer)
+/**
+ * Get some data from the ARM7/9 target.
+ *
+ * @param target Pointer to the ARM7/9 target to read data from
+ * @param size The number of 32bit words to be read
+ * @param buffer Pointer to the buffer that will hold the data
+ * @return The result of receiving data from the Embedded ICE unit
+ */
+int arm7_9_target_request_data(target_t *target, uint32_t size, uint8_t *buffer)
{
armv4_5_common_t *armv4_5 = target->arch_info;
arm7_9_common_t *arm7_9 = armv4_5->arch_info;
arm_jtag_t *jtag_info = &arm7_9->jtag_info;
- u32 *data;
- int i;
-
- data = malloc(size * (sizeof(u32)));
-
- embeddedice_receive(jtag_info, data, size);
-
+ uint32_t *data;
+ int retval = ERROR_OK;
+ uint32_t i;
+
+ data = malloc(size * (sizeof(uint32_t)));
+
+ retval = embeddedice_receive(jtag_info, data, size);
+
+ /* return the 32-bit ints in the 8-bit array */
for (i = 0; i < size; i++)
{
h_u32_to_le(buffer + (i * 4), data[i]);
}
-
+
free(data);
-
- return ERROR_OK;
+
+ return retval;
}
+/**
+ * Handles requests to an ARM7/9 target. If debug messaging is enabled, the
+ * target is running and the DCC control register has the W bit high, this will
+ * execute the request on the target.
+ *
+ * @param priv Void pointer expected to be a target_t pointer
+ * @return ERROR_OK unless there are issues with the JTAG queue or when reading
+ * from the Embedded ICE unit
+ */
int arm7_9_handle_target_request(void *priv)
{
+ int retval = ERROR_OK;
target_t *target = priv;
- if (!target->type->examined)
+ if (!target_was_examined(target))
return ERROR_OK;
armv4_5_common_t *armv4_5 = target->arch_info;
arm7_9_common_t *arm7_9 = armv4_5->arch_info;
- arm_jtag_t *jtag_info = &arm7_9->jtag_info;
+ arm_jtag_t *jtag_info = &arm7_9->jtag_info;
reg_t *dcc_control = &arm7_9->eice_cache->reg_list[EICE_COMMS_CTRL];
-
-
+
if (!target->dbg_msg_enabled)
return ERROR_OK;
-
+
if (target->state == TARGET_RUNNING)
{
/* read DCC control register */
embeddedice_read_reg(dcc_control);
- jtag_execute_queue();
-
+ if ((retval = jtag_execute_queue()) != ERROR_OK)
+ {
+ return retval;
+ }
+
/* check W bit */
if (buf_get_u32(dcc_control->value, 1, 1) == 1)
{
- u32 request;
-
- embeddedice_receive(jtag_info, &request, 1);
- target_request(target, request);
+ uint32_t request;
+
+ if ((retval = embeddedice_receive(jtag_info, &request, 1)) != ERROR_OK)
+ {
+ return retval;
+ }
+ if ((retval = target_request(target, request)) != ERROR_OK)
+ {
+ return retval;
+ }
}
}
-
+
return ERROR_OK;
}
+/**
+ * Polls an ARM7/9 target for its current status. If DBGACK is set, the target
+ * is manipulated to the right halted state based on its current state. This is
+ * what happens:
+ *
+ * <table>
+ * <tr><th>State</th><th>Action</th></tr>
+ * <tr><td>TARGET_RUNNING | TARGET_RESET</td><td>Enters debug mode. If TARGET_RESET, pc may be checked</td></tr>
+ * <tr><td>TARGET_UNKNOWN</td><td>Warning is logged</td></tr>
+ * <tr><td>TARGET_DEBUG_RUNNING</td><td>Enters debug mode</td></tr>
+ * <tr><td>TARGET_HALTED</td><td>Nothing</td></tr>
+ * </table>
+ *
+ * If the target does not end up in the halted state, a warning is produced. If
+ * DBGACK is cleared, then the target is expected to either be running or
+ * running in debug.
+ *
+ * @param target Pointer to the ARM7/9 target to poll
+ * @return ERROR_OK or an error status if a command fails
+ */
int arm7_9_poll(target_t *target)
{
int retval;
{
return retval;
}
-
+
if (buf_get_u32(dbg_stat->value, EICE_DBG_STATUS_DBGACK, 1))
{
/* LOG_DEBUG("DBGACK set, dbg_state->value: 0x%x", buf_get_u32(dbg_stat->value, 0, 32));*/
int check_pc=0;
if (target->state == TARGET_RESET)
{
- if ((target->reset_mode == RESET_HALT) || (target->reset_mode == RESET_INIT))
+ if (target->reset_halt)
{
+ enum reset_types jtag_reset_config = jtag_get_reset_config();
if ((jtag_reset_config & RESET_SRST_PULLS_TRST)==0)
{
check_pc = 1;
}
}
}
-
+
target->state = TARGET_HALTED;
-
+
if ((retval = arm7_9_debug_entry(target)) != ERROR_OK)
return retval;
-
+
if (check_pc)
{
reg_t *reg = register_get_by_name(target->reg_cache, "pc", 1);
- u32 t=*((u32 *)reg->value);
+ uint32_t t=*((uint32_t *)reg->value);
if (t!=0)
{
LOG_ERROR("PC was not 0. Does this target need srst_pulls_trst?");
}
}
-
- target_call_event_callbacks(target, TARGET_EVENT_HALTED);
+
+ if ((retval = target_call_event_callbacks(target, TARGET_EVENT_HALTED)) != ERROR_OK)
+ {
+ return retval;
+ }
}
if (target->state == TARGET_DEBUG_RUNNING)
{
target->state = TARGET_HALTED;
if ((retval = arm7_9_debug_entry(target)) != ERROR_OK)
return retval;
-
- target_call_event_callbacks(target, TARGET_EVENT_DEBUG_HALTED);
+
+ if ((retval = target_call_event_callbacks(target, TARGET_EVENT_DEBUG_HALTED)) != ERROR_OK)
+ {
+ return retval;
+ }
}
if (target->state != TARGET_HALTED)
{
- LOG_WARNING("DBGACK set, but the target did not end up in the halted stated %d", target->state);
+ LOG_WARNING("DBGACK set, but the target did not end up in the halted state %d", target->state);
}
}
else
if (target->state != TARGET_DEBUG_RUNNING)
target->state = TARGET_RUNNING;
}
-
+
return ERROR_OK;
}
-/*
- Some -S targets (ARM966E-S in the STR912 isn't affected, ARM926EJ-S
- in the LPC3180 and AT91SAM9260 is affected) completely stop the JTAG clock
- while the core is held in reset(SRST). It isn't possible to program the halt
- condition once reset was asserted, hence a hook that allows the target to set
- up its reset-halt condition prior to asserting reset.
-*/
-
+/**
+ * Asserts the reset (SRST) on an ARM7/9 target. Some -S targets (ARM966E-S in
+ * the STR912 isn't affected, ARM926EJ-S in the LPC3180 and AT91SAM9260 is
+ * affected) completely stop the JTAG clock while the core is held in reset
+ * (SRST). It isn't possible to program the halt condition once reset is
+ * asserted, hence a hook that allows the target to set up its reset-halt
+ * condition is setup prior to asserting reset.
+ *
+ * @param target Pointer to an ARM7/9 target to assert reset on
+ * @return ERROR_FAIL if the JTAG device does not have SRST, otherwise ERROR_OK
+ */
int arm7_9_assert_reset(target_t *target)
{
armv4_5_common_t *armv4_5 = target->arch_info;
arm7_9_common_t *arm7_9 = armv4_5->arch_info;
- LOG_DEBUG("target->state: %s", target_state_strings[target->state]);
-
+ LOG_DEBUG("target->state: %s",
+ Jim_Nvp_value2name_simple( nvp_target_state,target->state)->name);
+
+ enum reset_types jtag_reset_config = jtag_get_reset_config();
if (!(jtag_reset_config & RESET_HAS_SRST))
{
LOG_ERROR("Can't assert SRST");
return ERROR_FAIL;
}
- if ((target->reset_mode == RESET_HALT) || (target->reset_mode == RESET_INIT))
+ if (target->reset_halt)
{
/*
* Some targets do not support communication while SRST is asserted. We need to
* set up the reset vector catch here.
- *
+ *
* If TRST is asserted, then these settings will be reset anyway, so setting them
- * here is harmless.
+ * here is harmless.
*/
if (arm7_9->has_vector_catch)
{
}
}
- /* here we should issue a srst only, but we may have to assert trst as well */
+ /* here we should issue an SRST only, but we may have to assert TRST as well */
if (jtag_reset_config & RESET_SRST_PULLS_TRST)
{
jtag_add_reset(1, 1);
{
jtag_add_reset(0, 1);
}
-
target->state = TARGET_RESET;
jtag_add_sleep(50000);
armv4_5_invalidate_core_regs(target);
- return ERROR_OK;
+ if ((target->reset_halt)&&((jtag_reset_config & RESET_SRST_PULLS_TRST)==0))
+ {
+ /* debug entry was already prepared in arm7_9_assert_reset() */
+ target->debug_reason = DBG_REASON_DBGRQ;
+ }
+ return ERROR_OK;
}
+/**
+ * Deassert the reset (SRST) signal on an ARM7/9 target. If SRST pulls TRST
+ * and the target is being reset into a halt, a warning will be triggered
+ * because it is not possible to reset into a halted mode in this case. The
+ * target is halted using the target's functions.
+ *
+ * @param target Pointer to the target to have the reset deasserted
+ * @return ERROR_OK or an error from polling or halting the target
+ */
int arm7_9_deassert_reset(target_t *target)
{
- LOG_DEBUG("target->state: %s", target_state_strings[target->state]);
-
+ int retval=ERROR_OK;
+ LOG_DEBUG("target->state: %s",
+ Jim_Nvp_value2name_simple( nvp_target_state,target->state)->name);
+
/* deassert reset lines */
jtag_add_reset(0, 0);
-
- return ERROR_OK;
+
+ enum reset_types jtag_reset_config = jtag_get_reset_config();
+ if (target->reset_halt&&(jtag_reset_config & RESET_SRST_PULLS_TRST)!=0)
+ {
+ LOG_WARNING("srst pulls trst - can not reset into halted mode. Issuing halt after reset.");
+ /* set up embedded ice registers again */
+ if ((retval = target_examine_one(target)) != ERROR_OK)
+ return retval;
+
+ if ((retval=target_poll(target))!=ERROR_OK)
+ {
+ return retval;
+ }
+
+ if ((retval=target_halt(target))!=ERROR_OK)
+ {
+ return retval;
+ }
+
+ }
+ return retval;
}
+/**
+ * Clears the halt condition for an ARM7/9 target. If it isn't coming out of
+ * reset and if DBGRQ is used, it is progammed to be deasserted. If the reset
+ * vector catch was used, it is restored. Otherwise, the control value is
+ * restored and the watchpoint unit is restored if it was in use.
+ *
+ * @param target Pointer to the ARM7/9 target to have halt cleared
+ * @return Always ERROR_OK
+ */
int arm7_9_clear_halt(target_t *target)
{
armv4_5_common_t *armv4_5 = target->arch_info;
arm7_9_common_t *arm7_9 = armv4_5->arch_info;
reg_t *dbg_ctrl = &arm7_9->eice_cache->reg_list[EICE_DBG_CTRL];
-
+
/* we used DBGRQ only if we didn't come out of reset */
if (!arm7_9->debug_entry_from_reset && arm7_9->use_dbgrq)
{
/* program EmbeddedICE Debug Control Register to deassert DBGRQ
*/
- buf_set_u32(dbg_ctrl->value, EICE_DBG_CONTROL_DBGRQ, 1, 0);
+ buf_set_u32(dbg_ctrl->value, EICE_DBG_CONTROL_DBGRQ, 1, 0);
embeddedice_store_reg(dbg_ctrl);
}
else
embeddedice_store_reg(&arm7_9->eice_cache->reg_list[EICE_W0_DATA_MASK]);
embeddedice_store_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_MASK]);
}
- /* control value always has to be restored, as it was either disabled,
+ /* control value always has to be restored, as it was either disabled,
* or enabled with possibly different bits
*/
embeddedice_store_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_VALUE]);
}
}
-
+
return ERROR_OK;
}
+/**
+ * Issue a software reset and halt to an ARM7/9 target. The target is halted
+ * and then there is a wait until the processor shows the halt. This wait can
+ * timeout and results in an error being returned. The software reset involves
+ * clearing the halt, updating the debug control register, changing to ARM mode,
+ * reset of the program counter, and reset of all of the registers.
+ *
+ * @param target Pointer to the ARM7/9 target to be reset and halted by software
+ * @return Error status if any of the commands fail, otherwise ERROR_OK
+ */
int arm7_9_soft_reset_halt(struct target_s *target)
{
armv4_5_common_t *armv4_5 = target->arch_info;
reg_t *dbg_ctrl = &arm7_9->eice_cache->reg_list[EICE_DBG_CTRL];
int i;
int retval;
-
+
if ((retval=target_halt(target))!=ERROR_OK)
return retval;
-
- for (i=0; i<10; i++)
+
+ long long then=timeval_ms();
+ int timeout;
+ while (!(timeout=((timeval_ms()-then)>1000)))
{
if (buf_get_u32(dbg_stat->value, EICE_DBG_STATUS_DBGACK, 1) != 0)
break;
embeddedice_read_reg(dbg_stat);
if ((retval=jtag_execute_queue())!=ERROR_OK)
return retval;
- /* do not eat all CPU, time out after 1 se*/
- usleep(100*1000);
-
+ if (debug_level>=3)
+ {
+ alive_sleep(100);
+ } else
+ {
+ keep_alive();
+ }
}
- if (i==10)
+ if (timeout)
{
LOG_ERROR("Failed to halt CPU after 1 sec");
return ERROR_TARGET_TIMEOUT;
}
target->state = TARGET_HALTED;
-
+
/* program EmbeddedICE Debug Control Register to assert DBGACK and INTDIS
* ensure that DBGRQ is cleared
*/
buf_set_u32(dbg_ctrl->value, EICE_DBG_CONTROL_DBGRQ, 1, 0);
buf_set_u32(dbg_ctrl->value, EICE_DBG_CONTROL_INTDIS, 1, 1);
embeddedice_store_reg(dbg_ctrl);
-
- arm7_9_clear_halt(target);
-
+
+ if ((retval = arm7_9_clear_halt(target)) != ERROR_OK)
+ {
+ return retval;
+ }
+
/* if the target is in Thumb state, change to ARM state */
if (buf_get_u32(dbg_stat->value, EICE_DBG_STATUS_ITBIT, 1))
{
- u32 r0_thumb, pc_thumb;
+ uint32_t r0_thumb, pc_thumb;
LOG_DEBUG("target entered debug from Thumb state, changing to ARM");
/* Entered debug from Thumb mode */
armv4_5->core_state = ARMV4_5_STATE_THUMB;
arm7_9->change_to_arm(target, &r0_thumb, &pc_thumb);
}
-
+
/* all register content is now invalid */
- armv4_5_invalidate_core_regs(target);
-
+ if ((retval = armv4_5_invalidate_core_regs(target)) != ERROR_OK)
+ {
+ return retval;
+ }
+
/* SVC, ARM state, IRQ and FIQ disabled */
buf_set_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 8, 0xd3);
armv4_5->core_cache->reg_list[ARMV4_5_CPSR].dirty = 1;
armv4_5->core_cache->reg_list[ARMV4_5_CPSR].valid = 1;
-
+
/* start fetching from 0x0 */
buf_set_u32(armv4_5->core_cache->reg_list[15].value, 0, 32, 0x0);
armv4_5->core_cache->reg_list[15].dirty = 1;
armv4_5->core_cache->reg_list[15].valid = 1;
-
+
armv4_5->core_mode = ARMV4_5_MODE_SVC;
armv4_5->core_state = ARMV4_5_STATE_ARM;
if (armv4_5_mode_to_number(armv4_5->core_mode)==-1)
return ERROR_FAIL;
-
+
/* reset registers */
for (i = 0; i <= 14; i++)
- {
+ {
buf_set_u32(ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, i).value, 0, 32, 0xffffffff);
ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, i).dirty = 1;
ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, i).valid = 1;
}
-
- target_call_event_callbacks(target, TARGET_EVENT_HALTED);
-
+
+ if ((retval = target_call_event_callbacks(target, TARGET_EVENT_HALTED)) != ERROR_OK)
+ {
+ return retval;
+ }
+
return ERROR_OK;
}
+/**
+ * Halt an ARM7/9 target. This is accomplished by either asserting the DBGRQ
+ * line or by programming a watchpoint to trigger on any address. It is
+ * considered a bug to call this function while the target is in the
+ * TARGET_RESET state.
+ *
+ * @param target Pointer to the ARM7/9 target to be halted
+ * @return Always ERROR_OK
+ */
int arm7_9_halt(target_t *target)
{
+ if (target->state==TARGET_RESET)
+ {
+ LOG_ERROR("BUG: arm7/9 does not support halt during reset. This is handled in arm7_9_assert_reset()");
+ return ERROR_OK;
+ }
+
armv4_5_common_t *armv4_5 = target->arch_info;
arm7_9_common_t *arm7_9 = armv4_5->arch_info;
reg_t *dbg_ctrl = &arm7_9->eice_cache->reg_list[EICE_DBG_CTRL];
-
- LOG_DEBUG("target->state: %s", target_state_strings[target->state]);
-
+
+ LOG_DEBUG("target->state: %s",
+ Jim_Nvp_value2name_simple( nvp_target_state,target->state)->name);
+
if (target->state == TARGET_HALTED)
{
LOG_DEBUG("target was already halted");
return ERROR_OK;
}
-
+
if (target->state == TARGET_UNKNOWN)
{
LOG_WARNING("target was in unknown state when halt was requested");
}
-
- if (target->state == TARGET_RESET)
- {
- if ((jtag_reset_config & RESET_SRST_PULLS_TRST) && jtag_srst)
- {
- LOG_ERROR("can't request a halt while in reset if nSRST pulls nTRST");
- return ERROR_TARGET_FAILURE;
- }
- else
- {
- /* we came here in a reset_halt or reset_init sequence
- * debug entry was already prepared in arm7_9_assert_reset()
- */
- target->debug_reason = DBG_REASON_DBGRQ;
-
- return ERROR_OK;
- }
- }
if (arm7_9->use_dbgrq)
{
if (arm7_9->set_special_dbgrq) {
arm7_9->set_special_dbgrq(target);
} else {
- buf_set_u32(dbg_ctrl->value, EICE_DBG_CONTROL_DBGRQ, 1, 1);
+ buf_set_u32(dbg_ctrl->value, EICE_DBG_CONTROL_DBGRQ, 1, 1);
embeddedice_store_reg(dbg_ctrl);
}
}
}
target->debug_reason = DBG_REASON_DBGRQ;
-
+
return ERROR_OK;
}
+/**
+ * Handle an ARM7/9 target's entry into debug mode. The halt is cleared on the
+ * ARM. The JTAG queue is then executed and the reason for debug entry is
+ * examined. Once done, the target is verified to be halted and the processor
+ * is forced into ARM mode. The core registers are saved for the current core
+ * mode and the program counter (register 15) is updated as needed. The core
+ * registers and CPSR and SPSR are saved for restoration later.
+ *
+ * @param target Pointer to target that is entering debug mode
+ * @return Error code if anything fails, otherwise ERROR_OK
+ */
int arm7_9_debug_entry(target_t *target)
{
int i;
- u32 context[16];
- u32* context_p[16];
- u32 r0_thumb, pc_thumb;
- u32 cpsr;
+ uint32_t context[16];
+ uint32_t* context_p[16];
+ uint32_t r0_thumb, pc_thumb;
+ uint32_t cpsr;
int retval;
/* get pointers to arch-specific information */
armv4_5_common_t *armv4_5 = target->arch_info;
buf_set_u32(dbg_ctrl->value, EICE_DBG_CONTROL_DBGRQ, 1, 0);
buf_set_u32(dbg_ctrl->value, EICE_DBG_CONTROL_INTDIS, 1, 1);
embeddedice_store_reg(dbg_ctrl);
-
- arm7_9_clear_halt(target);
-
+
+ if ((retval = arm7_9_clear_halt(target)) != ERROR_OK)
+ {
+ return retval;
+ }
+
if ((retval = jtag_execute_queue()) != ERROR_OK)
{
return retval;
LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
-
+
/* if the target is in Thumb state, change to ARM state */
if (buf_get_u32(dbg_stat->value, EICE_DBG_STATUS_ITBIT, 1))
{
/* Entered debug from Thumb mode */
armv4_5->core_state = ARMV4_5_STATE_THUMB;
arm7_9->change_to_arm(target, &r0_thumb, &pc_thumb);
- LOG_DEBUG("r0_thumb: 0x%8.8x, pc_thumb: 0x%8.8x", r0_thumb, pc_thumb);
+ LOG_DEBUG("r0_thumb: 0x%8.8" PRIx32 ", pc_thumb: 0x%8.8" PRIx32 "", r0_thumb, pc_thumb);
}
else
{
/* Entered debug from ARM mode */
armv4_5->core_state = ARMV4_5_STATE_ARM;
}
-
+
for (i = 0; i < 16; i++)
context_p[i] = &context[i];
/* save core registers (r0 - r15 of current core mode) */
arm7_9->read_core_regs(target, 0xffff, context_p);
arm7_9->read_xpsr(target, &cpsr, 0);
-
+
if ((retval = jtag_execute_queue()) != ERROR_OK)
return retval;
-
+
/* if the core has been executing in Thumb state, set the T bit */
if (armv4_5->core_state == ARMV4_5_STATE_THUMB)
- cpsr |= 0x20;
-
+ cpsr |= 0x20;
+
buf_set_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 32, cpsr);
armv4_5->core_cache->reg_list[ARMV4_5_CPSR].dirty = 0;
armv4_5->core_cache->reg_list[ARMV4_5_CPSR].valid = 1;
-
+
armv4_5->core_mode = cpsr & 0x1f;
-
+
if (armv4_5_mode_to_number(armv4_5->core_mode) == -1)
{
target->state = TARGET_UNKNOWN;
}
LOG_DEBUG("target entered debug state in %s mode", armv4_5_mode_strings[armv4_5_mode_to_number(armv4_5->core_mode)]);
-
+
if (armv4_5->core_state == ARMV4_5_STATE_THUMB)
{
LOG_DEBUG("thumb state, applying fixups");
if (armv4_5_mode_to_number(armv4_5->core_mode)==-1)
return ERROR_FAIL;
-
+
for (i=0; i<=15; i++)
{
- LOG_DEBUG("r%i: 0x%8.8x", i, context[i]);
+ LOG_DEBUG("r%i: 0x%8.8" PRIx32 "", i, context[i]);
buf_set_u32(ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, i).value, 0, 32, context[i]);
ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, i).dirty = 0;
ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, i).valid = 1;
}
-
- LOG_DEBUG("entered debug state at PC 0x%x", context[15]);
-
+
+ LOG_DEBUG("entered debug state at PC 0x%" PRIx32 "", context[15]);
+
if (armv4_5_mode_to_number(armv4_5->core_mode)==-1)
return ERROR_FAIL;
/* exceptions other than USR & SYS have a saved program status register */
if ((armv4_5->core_mode != ARMV4_5_MODE_USR) && (armv4_5->core_mode != ARMV4_5_MODE_SYS))
{
- u32 spsr;
+ uint32_t spsr;
arm7_9->read_xpsr(target, &spsr, 1);
- jtag_execute_queue();
+ if ((retval = jtag_execute_queue()) != ERROR_OK)
+ {
+ return retval;
+ }
buf_set_u32(ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 16).value, 0, 32, spsr);
ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 16).dirty = 0;
ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 16).valid = 1;
return ERROR_OK;
}
+/**
+ * Validate the full context for an ARM7/9 target in all processor modes. If
+ * there are any invalid registers for the target, they will all be read. This
+ * includes the PSR.
+ *
+ * @param target Pointer to the ARM7/9 target to capture the full context from
+ * @return Error if the target is not halted, has an invalid core mode, or if
+ * the JTAG queue fails to execute
+ */
int arm7_9_full_context(target_t *target)
{
int i;
arm7_9_common_t *arm7_9 = armv4_5->arch_info;
LOG_DEBUG("-");
-
+
if (target->state != TARGET_HALTED)
{
LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
-
+
if (armv4_5_mode_to_number(armv4_5->core_mode)==-1)
return ERROR_FAIL;
/* iterate through processor modes (User, FIQ, IRQ, SVC, ABT, UND)
* SYS shares registers with User, so we don't touch SYS
*/
- for(i = 0; i < 6; i++)
+ for (i = 0; i < 6; i++)
{
- u32 mask = 0;
- u32* reg_p[16];
+ uint32_t mask = 0;
+ uint32_t* reg_p[16];
int j;
int valid = 1;
-
- /* check if there are invalid registers in the current mode
+
+ /* check if there are invalid registers in the current mode
*/
for (j = 0; j <= 16; j++)
{
if (ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5_number_to_mode(i), j).valid == 0)
valid = 0;
}
-
+
if (!valid)
{
- u32 tmp_cpsr;
-
+ uint32_t tmp_cpsr;
+
/* change processor mode (and mask T bit) */
tmp_cpsr = buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 8) & 0xE0;
tmp_cpsr |= armv4_5_number_to_mode(i);
for (j = 0; j < 15; j++)
{
if (ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5_number_to_mode(i), j).valid == 0)
- {
- reg_p[j] = (u32*)ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5_number_to_mode(i), j).value;
+ {
+ reg_p[j] = (uint32_t*)ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5_number_to_mode(i), j).value;
mask |= 1 << j;
ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5_number_to_mode(i), j).valid = 1;
ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5_number_to_mode(i), j).dirty = 0;
}
}
-
+
/* if only the PSR is invalid, mask is all zeroes */
if (mask)
arm7_9->read_core_regs(target, mask, reg_p);
-
+
/* check if the PSR has to be read */
if (ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5_number_to_mode(i), 16).valid == 0)
{
- arm7_9->read_xpsr(target, (u32*)ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5_number_to_mode(i), 16).value, 1);
+ arm7_9->read_xpsr(target, (uint32_t*)ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5_number_to_mode(i), 16).value, 1);
ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5_number_to_mode(i), 16).valid = 1;
ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5_number_to_mode(i), 16).dirty = 0;
}
/* restore processor mode (mask T bit) */
arm7_9->write_xpsr_im8(target, buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 8) & ~0x20, 0, 0);
-
+
if ((retval = jtag_execute_queue()) != ERROR_OK)
{
return retval;
return ERROR_OK;
}
+/**
+ * Restore the processor context on an ARM7/9 target. The full processor
+ * context is analyzed to see if any of the registers are dirty on this end, but
+ * have a valid new value. If this is the case, the processor is changed to the
+ * appropriate mode and the new register values are written out to the
+ * processor. If there happens to be a dirty register with an invalid value, an
+ * error will be logged.
+ *
+ * @param target Pointer to the ARM7/9 target to have its context restored
+ * @return Error status if the target is not halted or the core mode in the
+ * armv4_5 struct is invalid.
+ */
int arm7_9_restore_context(target_t *target)
{
armv4_5_common_t *armv4_5 = target->arch_info;
arm7_9_common_t *arm7_9 = armv4_5->arch_info;
- reg_t *reg;
+ reg_t *reg;
armv4_5_core_reg_t *reg_arch_info;
enum armv4_5_mode current_mode = armv4_5->core_mode;
int i, j;
int dirty;
int mode_change;
-
+
LOG_DEBUG("-");
-
+
if (target->state != TARGET_HALTED)
{
LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
-
+
if (arm7_9->pre_restore_context)
arm7_9->pre_restore_context(target);
-
+
if (armv4_5_mode_to_number(armv4_5->core_mode)==-1)
return ERROR_FAIL;
-
+
/* iterate through processor modes (User, FIQ, IRQ, SVC, ABT, UND)
* SYS shares registers with User, so we don't touch SYS
*/
LOG_DEBUG("examining %s mode", armv4_5_mode_strings[i]);
dirty = 0;
mode_change = 0;
- /* check if there are dirty registers in the current mode
+ /* check if there are dirty registers in the current mode
*/
for (j = 0; j <= 16; j++)
{
LOG_DEBUG("examining dirty reg: %s", reg->name);
if ((reg_arch_info->mode != ARMV4_5_MODE_ANY)
&& (reg_arch_info->mode != current_mode)
- && !((reg_arch_info->mode == ARMV4_5_MODE_USR) && (armv4_5->core_mode == ARMV4_5_MODE_SYS))
+ && !((reg_arch_info->mode == ARMV4_5_MODE_USR) && (armv4_5->core_mode == ARMV4_5_MODE_SYS))
&& !((reg_arch_info->mode == ARMV4_5_MODE_SYS) && (armv4_5->core_mode == ARMV4_5_MODE_USR)))
{
mode_change = 1;
}
}
}
-
+
if (dirty)
{
- u32 mask = 0x0;
+ uint32_t mask = 0x0;
int num_regs = 0;
- u32 regs[16];
+ uint32_t regs[16];
if (mode_change)
{
- u32 tmp_cpsr;
-
+ uint32_t tmp_cpsr;
+
/* change processor mode (mask T bit) */
tmp_cpsr = buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 8) & 0xE0;
tmp_cpsr |= armv4_5_number_to_mode(i);
arm7_9->write_xpsr_im8(target, tmp_cpsr & 0xff, 0, 0);
current_mode = armv4_5_number_to_mode(i);
}
-
+
for (j = 0; j <= 14; j++)
{
reg = &ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5_number_to_mode(i), j);
reg_arch_info = reg->arch_info;
-
-
+
+
if (reg->dirty == 1)
{
regs[j] = buf_get_u32(reg->value, 0, 32);
num_regs++;
reg->dirty = 0;
reg->valid = 1;
- LOG_DEBUG("writing register %i of mode %s with value 0x%8.8x", j, armv4_5_mode_strings[i], regs[j]);
+ LOG_DEBUG("writing register %i of mode %s with value 0x%8.8" PRIx32 "", j, armv4_5_mode_strings[i], regs[j]);
}
}
-
+
if (mask)
{
arm7_9->write_core_regs(target, mask, regs);
}
-
+
reg = &ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5_number_to_mode(i), 16);
reg_arch_info = reg->arch_info;
if ((reg->dirty) && (reg_arch_info->mode != ARMV4_5_MODE_ANY))
{
- LOG_DEBUG("writing SPSR of mode %i with value 0x%8.8x", i, buf_get_u32(reg->value, 0, 32));
+ LOG_DEBUG("writing SPSR of mode %i with value 0x%8.8" PRIx32 "", i, buf_get_u32(reg->value, 0, 32));
arm7_9->write_xpsr(target, buf_get_u32(reg->value, 0, 32), 1);
}
}
}
-
+
if ((armv4_5->core_cache->reg_list[ARMV4_5_CPSR].dirty == 0) && (armv4_5->core_mode != current_mode))
{
/* restore processor mode (mask T bit) */
- u32 tmp_cpsr;
-
+ uint32_t tmp_cpsr;
+
tmp_cpsr = buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 8) & 0xE0;
tmp_cpsr |= armv4_5_number_to_mode(i);
tmp_cpsr &= ~0x20;
- LOG_DEBUG("writing lower 8 bit of cpsr with value 0x%2.2x", tmp_cpsr);
+ LOG_DEBUG("writing lower 8 bit of cpsr with value 0x%2.2x", (unsigned)(tmp_cpsr));
arm7_9->write_xpsr_im8(target, tmp_cpsr & 0xff, 0, 0);
}
else if (armv4_5->core_cache->reg_list[ARMV4_5_CPSR].dirty == 1)
{
/* CPSR has been changed, full restore necessary (mask T bit) */
- LOG_DEBUG("writing cpsr with value 0x%8.8x", buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 32));
+ LOG_DEBUG("writing cpsr with value 0x%8.8" PRIx32 "", buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 32));
arm7_9->write_xpsr(target, buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 32) & ~0x20, 0);
armv4_5->core_cache->reg_list[ARMV4_5_CPSR].dirty = 0;
armv4_5->core_cache->reg_list[ARMV4_5_CPSR].valid = 1;
}
-
+
/* restore PC */
- LOG_DEBUG("writing PC with value 0x%8.8x", buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32));
+ LOG_DEBUG("writing PC with value 0x%8.8" PRIx32 "", buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32));
arm7_9->write_pc(target, buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32));
armv4_5->core_cache->reg_list[15].dirty = 0;
-
+
if (arm7_9->post_restore_context)
arm7_9->post_restore_context(target);
return ERROR_OK;
}
+/**
+ * Restart the core of an ARM7/9 target. A RESTART command is sent to the
+ * instruction register and the JTAG state is set to TAP_IDLE causing a core
+ * restart.
+ *
+ * @param target Pointer to the ARM7/9 target to be restarted
+ * @return Result of executing the JTAG queue
+ */
int arm7_9_restart_core(struct target_s *target)
{
armv4_5_common_t *armv4_5 = target->arch_info;
arm7_9_common_t *arm7_9 = armv4_5->arch_info;
arm_jtag_t *jtag_info = &arm7_9->jtag_info;
-
+
/* set RESTART instruction */
- jtag_add_end_state(TAP_RTI);
+ jtag_set_end_state(TAP_IDLE);
if (arm7_9->need_bypass_before_restart) {
arm7_9->need_bypass_before_restart = 0;
arm_jtag_set_instr(jtag_info, 0xf, NULL);
}
arm_jtag_set_instr(jtag_info, 0x4, NULL);
-
- jtag_add_runtest(1, TAP_RTI);
+
+ jtag_add_runtest(1, jtag_set_end_state(TAP_IDLE));
return jtag_execute_queue();
}
+/**
+ * Enable the watchpoints on an ARM7/9 target. The target's watchpoints are
+ * iterated through and are set on the target if they aren't already set.
+ *
+ * @param target Pointer to the ARM7/9 target to enable watchpoints on
+ */
void arm7_9_enable_watchpoints(struct target_s *target)
{
watchpoint_t *watchpoint = target->watchpoints;
-
+
while (watchpoint)
{
if (watchpoint->set == 0)
}
}
+/**
+ * Enable the breakpoints on an ARM7/9 target. The target's breakpoints are
+ * iterated through and are set on the target.
+ *
+ * @param target Pointer to the ARM7/9 target to enable breakpoints on
+ */
void arm7_9_enable_breakpoints(struct target_s *target)
{
breakpoint_t *breakpoint = target->breakpoints;
-
- /* set any pending breakpoints */
- while (breakpoint)
- {
- if (breakpoint->set == 0)
- arm7_9_set_breakpoint(target, breakpoint);
- breakpoint = breakpoint->next;
- }
-}
-
-void arm7_9_disable_bkpts_and_wpts(struct target_s *target)
-{
- breakpoint_t *breakpoint = target->breakpoints;
- watchpoint_t *watchpoint = target->watchpoints;
/* set any pending breakpoints */
while (breakpoint)
{
- if (breakpoint->set != 0)
- arm7_9_unset_breakpoint(target, breakpoint);
+ arm7_9_set_breakpoint(target, breakpoint);
breakpoint = breakpoint->next;
}
-
- while (watchpoint)
- {
- if (watchpoint->set != 0)
- arm7_9_unset_watchpoint(target, watchpoint);
- watchpoint = watchpoint->next;
- }
}
-int arm7_9_resume(struct target_s *target, int current, u32 address, int handle_breakpoints, int debug_execution)
+int arm7_9_resume(struct target_s *target, int current, uint32_t address, int handle_breakpoints, int debug_execution)
{
armv4_5_common_t *armv4_5 = target->arch_info;
arm7_9_common_t *arm7_9 = armv4_5->arch_info;
breakpoint_t *breakpoint = target->breakpoints;
reg_t *dbg_ctrl = &arm7_9->eice_cache->reg_list[EICE_DBG_CTRL];
- int err;
-
+ int err, retval = ERROR_OK;
+
LOG_DEBUG("-");
-
+
if (target->state != TARGET_HALTED)
{
LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
-
+
if (!debug_execution)
{
target_free_all_working_areas(target);
}
-
+
/* current = 1: continue on current pc, otherwise continue at <address> */
if (!current)
buf_set_u32(armv4_5->core_cache->reg_list[15].value, 0, 32, address);
-
+
+ uint32_t current_pc;
+ current_pc = buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32);
+
/* the front-end may request us not to handle breakpoints */
if (handle_breakpoints)
{
if ((breakpoint = breakpoint_find(target, buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32))))
{
- LOG_DEBUG("unset breakpoint at 0x%8.8x", breakpoint->address);
- arm7_9_unset_breakpoint(target, breakpoint);
-
+ LOG_DEBUG("unset breakpoint at 0x%8.8" PRIx32 "", breakpoint->address);
+ if ((retval = arm7_9_unset_breakpoint(target, breakpoint)) != ERROR_OK)
+ {
+ return retval;
+ }
+
+ /* calculate PC of next instruction */
+ uint32_t next_pc;
+ if ((retval = arm_simulate_step(target, &next_pc)) != ERROR_OK)
+ {
+ uint32_t current_opcode;
+ target_read_u32(target, current_pc, ¤t_opcode);
+ LOG_ERROR("BUG: couldn't calculate PC of next instruction, current opcode was 0x%8.8" PRIx32 "", current_opcode);
+ return retval;
+ }
+
LOG_DEBUG("enable single-step");
- arm7_9->enable_single_step(target);
-
+ arm7_9->enable_single_step(target, next_pc);
+
target->debug_reason = DBG_REASON_SINGLESTEP;
- arm7_9_restore_context(target);
-
+ if ((retval = arm7_9_restore_context(target)) != ERROR_OK)
+ {
+ return retval;
+ }
+
if (armv4_5->core_state == ARMV4_5_STATE_ARM)
arm7_9->branch_resume(target);
else if (armv4_5->core_state == ARMV4_5_STATE_THUMB)
LOG_ERROR("unhandled core state");
return ERROR_FAIL;
}
-
+
buf_set_u32(dbg_ctrl->value, EICE_DBG_CONTROL_DBGACK, 1, 0);
embeddedice_write_reg(dbg_ctrl, buf_get_u32(dbg_ctrl->value, 0, dbg_ctrl->size));
err = arm7_9_execute_sys_speed(target);
-
+
LOG_DEBUG("disable single-step");
arm7_9->disable_single_step(target);
if (err != ERROR_OK)
{
- arm7_9_set_breakpoint(target, breakpoint);
+ if ((retval = arm7_9_set_breakpoint(target, breakpoint)) != ERROR_OK)
+ {
+ return retval;
+ }
target->state = TARGET_UNKNOWN;
return err;
}
arm7_9_debug_entry(target);
- LOG_DEBUG("new PC after step: 0x%8.8x", buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32));
+ LOG_DEBUG("new PC after step: 0x%8.8" PRIx32 "", buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32));
- LOG_DEBUG("set breakpoint at 0x%8.8x", breakpoint->address);
- arm7_9_set_breakpoint(target, breakpoint);
+ LOG_DEBUG("set breakpoint at 0x%8.8" PRIx32 "", breakpoint->address);
+ if ((retval = arm7_9_set_breakpoint(target, breakpoint)) != ERROR_OK)
+ {
+ return retval;
+ }
}
}
-
+
/* enable any pending breakpoints and watchpoints */
arm7_9_enable_breakpoints(target);
arm7_9_enable_watchpoints(target);
-
- arm7_9_restore_context(target);
-
+
+ if ((retval = arm7_9_restore_context(target)) != ERROR_OK)
+ {
+ return retval;
+ }
+
if (armv4_5->core_state == ARMV4_5_STATE_ARM)
{
arm7_9->branch_resume(target);
LOG_ERROR("unhandled core state");
return ERROR_FAIL;
}
-
+
/* deassert DBGACK and INTDIS */
buf_set_u32(dbg_ctrl->value, EICE_DBG_CONTROL_DBGACK, 1, 0);
/* INTDIS only when we really resume, not during debug execution */
if (!debug_execution)
buf_set_u32(dbg_ctrl->value, EICE_DBG_CONTROL_INTDIS, 1, 0);
embeddedice_write_reg(dbg_ctrl, buf_get_u32(dbg_ctrl->value, 0, dbg_ctrl->size));
-
- arm7_9_restart_core(target);
-
+
+ if ((retval = arm7_9_restart_core(target)) != ERROR_OK)
+ {
+ return retval;
+ }
+
target->debug_reason = DBG_REASON_NOTHALTED;
-
+
if (!debug_execution)
{
/* registers are now invalid */
armv4_5_invalidate_core_regs(target);
target->state = TARGET_RUNNING;
- target_call_event_callbacks(target, TARGET_EVENT_RESUMED);
+ if ((retval = target_call_event_callbacks(target, TARGET_EVENT_RESUMED)) != ERROR_OK)
+ {
+ return retval;
+ }
}
else
{
target->state = TARGET_DEBUG_RUNNING;
- target_call_event_callbacks(target, TARGET_EVENT_DEBUG_RESUMED);
+ if ((retval = target_call_event_callbacks(target, TARGET_EVENT_DEBUG_RESUMED)) != ERROR_OK)
+ {
+ return retval;
+ }
}
-
+
LOG_DEBUG("target resumed");
-
+
return ERROR_OK;
}
-void arm7_9_enable_eice_step(target_t *target)
+void arm7_9_enable_eice_step(target_t *target, uint32_t next_pc)
{
armv4_5_common_t *armv4_5 = target->arch_info;
arm7_9_common_t *arm7_9 = armv4_5->arch_info;
-
- /* setup an inverse breakpoint on the current PC
- * - comparator 1 matches the current address
- * - rangeout from comparator 1 is connected to comparator 0 rangein
- * - comparator 0 matches any address, as long as rangein is low */
- embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_ADDR_MASK], 0xffffffff);
- embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_DATA_MASK], 0xffffffff);
- embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_VALUE], EICE_W_CTRL_ENABLE);
- embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_MASK], ~(EICE_W_CTRL_RANGE|EICE_W_CTRL_nOPC) & 0xff);
- embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W1_ADDR_VALUE], buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32));
- embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W1_ADDR_MASK], 0);
- embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W1_DATA_MASK], 0xffffffff);
- embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_VALUE], 0x0);
- embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_MASK], ~EICE_W_CTRL_nOPC & 0xff);
+
+ uint32_t current_pc;
+ current_pc = buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32);
+
+ if (next_pc != current_pc)
+ {
+ /* setup an inverse breakpoint on the current PC
+ * - comparator 1 matches the current address
+ * - rangeout from comparator 1 is connected to comparator 0 rangein
+ * - comparator 0 matches any address, as long as rangein is low */
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_ADDR_MASK], 0xffffffff);
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_DATA_MASK], 0xffffffff);
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_VALUE], EICE_W_CTRL_ENABLE);
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_MASK], ~(EICE_W_CTRL_RANGE|EICE_W_CTRL_nOPC) & 0xff);
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W1_ADDR_VALUE], current_pc);
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W1_ADDR_MASK], 0);
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W1_DATA_MASK], 0xffffffff);
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_VALUE], 0x0);
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_MASK], ~EICE_W_CTRL_nOPC & 0xff);
+ }
+ else
+ {
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_ADDR_MASK], 0xffffffff);
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_DATA_MASK], 0xffffffff);
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_VALUE], 0x0);
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_MASK], 0xff);
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W1_ADDR_VALUE], next_pc);
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W1_ADDR_MASK], 0);
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W1_DATA_MASK], 0xffffffff);
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_VALUE], EICE_W_CTRL_ENABLE);
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_MASK], ~EICE_W_CTRL_nOPC & 0xff);
+ }
}
void arm7_9_disable_eice_step(target_t *target)
embeddedice_store_reg(&arm7_9->eice_cache->reg_list[EICE_W1_CONTROL_VALUE]);
}
-int arm7_9_step(struct target_s *target, int current, u32 address, int handle_breakpoints)
+int arm7_9_step(struct target_s *target, int current, uint32_t address, int handle_breakpoints)
{
armv4_5_common_t *armv4_5 = target->arch_info;
arm7_9_common_t *arm7_9 = armv4_5->arch_info;
breakpoint_t *breakpoint = NULL;
- int err;
+ int err, retval;
if (target->state != TARGET_HALTED)
{
LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
}
-
+
/* current = 1: continue on current pc, otherwise continue at <address> */
if (!current)
buf_set_u32(armv4_5->core_cache->reg_list[15].value, 0, 32, address);
-
+
+ uint32_t current_pc;
+ current_pc = buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32);
+
/* the front-end may request us not to handle breakpoints */
if (handle_breakpoints)
if ((breakpoint = breakpoint_find(target, buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32))))
- arm7_9_unset_breakpoint(target, breakpoint);
-
+ if ((retval = arm7_9_unset_breakpoint(target, breakpoint)) != ERROR_OK)
+ {
+ return retval;
+ }
+
target->debug_reason = DBG_REASON_SINGLESTEP;
- arm7_9_restore_context(target);
-
- arm7_9->enable_single_step(target);
-
+ /* calculate PC of next instruction */
+ uint32_t next_pc;
+ if ((retval = arm_simulate_step(target, &next_pc)) != ERROR_OK)
+ {
+ uint32_t current_opcode;
+ target_read_u32(target, current_pc, ¤t_opcode);
+ LOG_ERROR("BUG: couldn't calculate PC of next instruction, current opcode was 0x%8.8" PRIx32 "", current_opcode);
+ return retval;
+ }
+
+ if ((retval = arm7_9_restore_context(target)) != ERROR_OK)
+ {
+ return retval;
+ }
+
+ arm7_9->enable_single_step(target, next_pc);
+
if (armv4_5->core_state == ARMV4_5_STATE_ARM)
{
arm7_9->branch_resume(target);
LOG_ERROR("unhandled core state");
return ERROR_FAIL;
}
-
- target_call_event_callbacks(target, TARGET_EVENT_RESUMED);
+
+ if ((retval = target_call_event_callbacks(target, TARGET_EVENT_RESUMED)) != ERROR_OK)
+ {
+ return retval;
+ }
err = arm7_9_execute_sys_speed(target);
arm7_9->disable_single_step(target);
-
+
/* registers are now invalid */
armv4_5_invalidate_core_regs(target);
-
+
if (err != ERROR_OK)
{
target->state = TARGET_UNKNOWN;
} else {
arm7_9_debug_entry(target);
- target_call_event_callbacks(target, TARGET_EVENT_HALTED);
+ if ((retval = target_call_event_callbacks(target, TARGET_EVENT_HALTED)) != ERROR_OK)
+ {
+ return retval;
+ }
LOG_DEBUG("target stepped");
}
-
+
if (breakpoint)
- arm7_9_set_breakpoint(target, breakpoint);
-
- return err;
+ if ((retval = arm7_9_set_breakpoint(target, breakpoint)) != ERROR_OK)
+ {
+ return retval;
+ }
+ return err;
}
int arm7_9_read_core_reg(struct target_s *target, int num, enum armv4_5_mode mode)
{
- u32* reg_p[16];
- u32 value;
+ uint32_t* reg_p[16];
+ uint32_t value;
int retval;
armv4_5_common_t *armv4_5 = target->arch_info;
arm7_9_common_t *arm7_9 = armv4_5->arch_info;
-
+
if (armv4_5_mode_to_number(armv4_5->core_mode)==-1)
return ERROR_FAIL;
-
+
enum armv4_5_mode reg_mode = ((armv4_5_core_reg_t*)ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, mode, num).arch_info)->mode;
-
+
if ((num < 0) || (num > 16))
return ERROR_INVALID_ARGUMENTS;
-
+
if ((mode != ARMV4_5_MODE_ANY)
&& (mode != armv4_5->core_mode)
&& (reg_mode != ARMV4_5_MODE_ANY))
{
- u32 tmp_cpsr;
-
+ uint32_t tmp_cpsr;
+
/* change processor mode (mask T bit) */
tmp_cpsr = buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 8) & 0xE0;
tmp_cpsr |= mode;
tmp_cpsr &= ~0x20;
arm7_9->write_xpsr_im8(target, tmp_cpsr & 0xff, 0, 0);
}
-
+
if ((num >= 0) && (num <= 15))
{
/* read a normal core register */
reg_p[num] = &value;
-
+
arm7_9->read_core_regs(target, 1 << num, reg_p);
}
else
*/
armv4_5_core_reg_t *arch_info = ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, mode, num).arch_info;
int spsr = (arch_info->mode == ARMV4_5_MODE_ANY) ? 0 : 1;
-
+
arm7_9->read_xpsr(target, &value, spsr);
}
-
+
if ((retval = jtag_execute_queue()) != ERROR_OK)
{
return retval;
}
-
+
ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, mode, num).valid = 1;
ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, mode, num).dirty = 0;
buf_set_u32(ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, mode, num).value, 0, 32, value);
-
+
if ((mode != ARMV4_5_MODE_ANY)
&& (mode != armv4_5->core_mode)
&& (reg_mode != ARMV4_5_MODE_ANY)) {
/* restore processor mode (mask T bit) */
arm7_9->write_xpsr_im8(target, buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 8) & ~0x20, 0, 0);
}
-
+
return ERROR_OK;
-
}
-int arm7_9_write_core_reg(struct target_s *target, int num, enum armv4_5_mode mode, u32 value)
+int arm7_9_write_core_reg(struct target_s *target, int num, enum armv4_5_mode mode, uint32_t value)
{
- u32 reg[16];
+ uint32_t reg[16];
armv4_5_common_t *armv4_5 = target->arch_info;
arm7_9_common_t *arm7_9 = armv4_5->arch_info;
-
+
if (armv4_5_mode_to_number(armv4_5->core_mode)==-1)
return ERROR_FAIL;
-
+
enum armv4_5_mode reg_mode = ((armv4_5_core_reg_t*)ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, mode, num).arch_info)->mode;
if ((num < 0) || (num > 16))
return ERROR_INVALID_ARGUMENTS;
-
+
if ((mode != ARMV4_5_MODE_ANY)
&& (mode != armv4_5->core_mode)
&& (reg_mode != ARMV4_5_MODE_ANY)) {
- u32 tmp_cpsr;
-
+ uint32_t tmp_cpsr;
+
/* change processor mode (mask T bit) */
tmp_cpsr = buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 8) & 0xE0;
tmp_cpsr |= mode;
tmp_cpsr &= ~0x20;
arm7_9->write_xpsr_im8(target, tmp_cpsr & 0xff, 0, 0);
}
-
+
if ((num >= 0) && (num <= 15))
{
/* write a normal core register */
reg[num] = value;
-
+
arm7_9->write_core_regs(target, 1 << num, reg);
}
else
*/
armv4_5_core_reg_t *arch_info = ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, mode, num).arch_info;
int spsr = (arch_info->mode == ARMV4_5_MODE_ANY) ? 0 : 1;
-
+
/* if we're writing the CPSR, mask the T bit */
if (!spsr)
value &= ~0x20;
-
+
arm7_9->write_xpsr(target, value, spsr);
}
-
+
ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, mode, num).valid = 1;
ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, mode, num).dirty = 0;
-
+
if ((mode != ARMV4_5_MODE_ANY)
&& (mode != armv4_5->core_mode)
&& (reg_mode != ARMV4_5_MODE_ANY)) {
/* restore processor mode (mask T bit) */
arm7_9->write_xpsr_im8(target, buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 8) & ~0x20, 0, 0);
}
-
+
return jtag_execute_queue();
}
-int arm7_9_read_memory(struct target_s *target, u32 address, u32 size, u32 count, u8 *buffer)
+int arm7_9_read_memory(struct target_s *target, uint32_t address, uint32_t size, uint32_t count, uint8_t *buffer)
{
armv4_5_common_t *armv4_5 = target->arch_info;
arm7_9_common_t *arm7_9 = armv4_5->arch_info;
-
- u32 reg[16];
- int num_accesses = 0;
+
+ uint32_t reg[16];
+ uint32_t num_accesses = 0;
int thisrun_accesses;
int i;
- u32 cpsr;
+ uint32_t cpsr;
int retval;
int last_reg = 0;
-
- LOG_DEBUG("address: 0x%8.8x, size: 0x%8.8x, count: 0x%8.8x", address, size, count);
+
+ LOG_DEBUG("address: 0x%8.8" PRIx32 ", size: 0x%8.8" PRIx32 ", count: 0x%8.8" PRIx32 "", address, size, count);
if (target->state != TARGET_HALTED)
{
if (((size == 4) && (address & 0x3u)) || ((size == 2) && (address & 0x1u)))
return ERROR_TARGET_UNALIGNED_ACCESS;
-
+
/* load the base register with the address of the first word */
reg[0] = address;
arm7_9->write_core_regs(target, 0x1, reg);
-
+
+ int j=0;
+
switch (size)
{
case 4:
while (num_accesses < count)
{
- u32 reg_list;
+ uint32_t reg_list;
thisrun_accesses = ((count - num_accesses) >= 14) ? 14 : (count - num_accesses);
reg_list = (0xffff >> (15 - thisrun_accesses)) & 0xfffe;
-
+
if (last_reg <= thisrun_accesses)
last_reg = thisrun_accesses;
-
+
arm7_9->load_word_regs(target, reg_list);
-
+
/* fast memory reads are only safe when the target is running
* from a sufficiently high clock (32 kHz is usually too slow)
*/
if (arm7_9->fast_memory_access)
- arm7_9_execute_fast_sys_speed(target);
+ retval = arm7_9_execute_fast_sys_speed(target);
else
- arm7_9_execute_sys_speed(target);
-
+ retval = arm7_9_execute_sys_speed(target);
+ if (retval != ERROR_OK)
+ return retval;
+
arm7_9->read_core_regs_target_buffer(target, reg_list, buffer, 4);
-
+
/* advance buffer, count number of accesses */
buffer += thisrun_accesses * 4;
num_accesses += thisrun_accesses;
- }
+
+ if ((j++%1024)==0)
+ {
+ keep_alive();
+ }
+ }
break;
case 2:
while (num_accesses < count)
{
- u32 reg_list;
+ uint32_t reg_list;
thisrun_accesses = ((count - num_accesses) >= 14) ? 14 : (count - num_accesses);
reg_list = (0xffff >> (15 - thisrun_accesses)) & 0xfffe;
-
+
for (i = 1; i <= thisrun_accesses; i++)
{
if (i > last_reg)
* from a sufficiently high clock (32 kHz is usually too slow)
*/
if (arm7_9->fast_memory_access)
- arm7_9_execute_fast_sys_speed(target);
+ retval = arm7_9_execute_fast_sys_speed(target);
else
- arm7_9_execute_sys_speed(target);
+ retval = arm7_9_execute_sys_speed(target);
+ if (retval != ERROR_OK)
+ {
+ return retval;
+ }
+
}
-
+
arm7_9->read_core_regs_target_buffer(target, reg_list, buffer, 2);
-
+
/* advance buffer, count number of accesses */
buffer += thisrun_accesses * 2;
num_accesses += thisrun_accesses;
- }
+
+ if ((j++%1024)==0)
+ {
+ keep_alive();
+ }
+ }
break;
case 1:
while (num_accesses < count)
{
- u32 reg_list;
+ uint32_t reg_list;
thisrun_accesses = ((count - num_accesses) >= 14) ? 14 : (count - num_accesses);
reg_list = (0xffff >> (15 - thisrun_accesses)) & 0xfffe;
-
+
for (i = 1; i <= thisrun_accesses; i++)
{
if (i > last_reg)
* from a sufficiently high clock (32 kHz is usually too slow)
*/
if (arm7_9->fast_memory_access)
- arm7_9_execute_fast_sys_speed(target);
+ retval = arm7_9_execute_fast_sys_speed(target);
else
- arm7_9_execute_sys_speed(target);
+ retval = arm7_9_execute_sys_speed(target);
+ if (retval != ERROR_OK)
+ {
+ return retval;
+ }
}
-
+
arm7_9->read_core_regs_target_buffer(target, reg_list, buffer, 1);
-
+
/* advance buffer, count number of accesses */
buffer += thisrun_accesses * 1;
num_accesses += thisrun_accesses;
- }
+
+ if ((j++%1024)==0)
+ {
+ keep_alive();
+ }
+ }
break;
default:
LOG_ERROR("BUG: we shouldn't get here");
exit(-1);
break;
}
-
+
if (armv4_5_mode_to_number(armv4_5->core_mode)==-1)
return ERROR_FAIL;
if (((cpsr & 0x1f) == ARMV4_5_MODE_ABT) && (armv4_5->core_mode != ARMV4_5_MODE_ABT))
{
- LOG_WARNING("memory read caused data abort (address: 0x%8.8x, size: 0x%x, count: 0x%x)", address, size, count);
+ LOG_WARNING("memory read caused data abort (address: 0x%8.8" PRIx32 ", size: 0x%" PRIx32 ", count: 0x%" PRIx32 ")", address, size, count);
arm7_9->write_xpsr_im8(target, buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 8) & ~0x20, 0, 0);
return ERROR_TARGET_DATA_ABORT;
}
-
+
return ERROR_OK;
}
-int arm7_9_write_memory(struct target_s *target, u32 address, u32 size, u32 count, u8 *buffer)
+int arm7_9_write_memory(struct target_s *target, uint32_t address, uint32_t size, uint32_t count, uint8_t *buffer)
{
armv4_5_common_t *armv4_5 = target->arch_info;
arm7_9_common_t *arm7_9 = armv4_5->arch_info;
reg_t *dbg_ctrl = &arm7_9->eice_cache->reg_list[EICE_DBG_CTRL];
-
- u32 reg[16];
- int num_accesses = 0;
+
+ uint32_t reg[16];
+ uint32_t num_accesses = 0;
int thisrun_accesses;
int i;
- u32 cpsr;
+ uint32_t cpsr;
int retval;
int last_reg = 0;
if (((size == 4) && (address & 0x3u)) || ((size == 2) && (address & 0x1u)))
return ERROR_TARGET_UNALIGNED_ACCESS;
-
+
/* load the base register with the address of the first word */
reg[0] = address;
arm7_9->write_core_regs(target, 0x1, reg);
-
+
/* Clear DBGACK, to make sure memory fetches work as expected */
buf_set_u32(dbg_ctrl->value, EICE_DBG_CONTROL_DBGACK, 1, 0);
embeddedice_store_reg(dbg_ctrl);
-
+
switch (size)
{
case 4:
while (num_accesses < count)
{
- u32 reg_list;
+ uint32_t reg_list;
thisrun_accesses = ((count - num_accesses) >= 14) ? 14 : (count - num_accesses);
reg_list = (0xffff >> (15 - thisrun_accesses)) & 0xfffe;
-
+
for (i = 1; i <= thisrun_accesses; i++)
{
if (i > last_reg)
reg[i] = target_buffer_get_u32(target, buffer);
buffer += 4;
}
-
+
arm7_9->write_core_regs(target, reg_list, reg);
-
+
arm7_9->store_word_regs(target, reg_list);
-
+
/* fast memory writes are only safe when the target is running
* from a sufficiently high clock (32 kHz is usually too slow)
*/
if (arm7_9->fast_memory_access)
- arm7_9_execute_fast_sys_speed(target);
+ retval = arm7_9_execute_fast_sys_speed(target);
else
- arm7_9_execute_sys_speed(target);
-
+ retval = arm7_9_execute_sys_speed(target);
+ if (retval != ERROR_OK)
+ {
+ return retval;
+ }
+
num_accesses += thisrun_accesses;
- }
+ }
break;
case 2:
while (num_accesses < count)
{
- u32 reg_list;
+ uint32_t reg_list;
thisrun_accesses = ((count - num_accesses) >= 14) ? 14 : (count - num_accesses);
reg_list = (0xffff >> (15 - thisrun_accesses)) & 0xfffe;
-
+
for (i = 1; i <= thisrun_accesses; i++)
{
if (i > last_reg)
reg[i] = target_buffer_get_u16(target, buffer) & 0xffff;
buffer += 2;
}
-
+
arm7_9->write_core_regs(target, reg_list, reg);
-
+
for (i = 1; i <= thisrun_accesses; i++)
{
arm7_9->store_hword_reg(target, i);
-
+
/* fast memory writes are only safe when the target is running
* from a sufficiently high clock (32 kHz is usually too slow)
*/
if (arm7_9->fast_memory_access)
- arm7_9_execute_fast_sys_speed(target);
+ retval = arm7_9_execute_fast_sys_speed(target);
else
- arm7_9_execute_sys_speed(target);
+ retval = arm7_9_execute_sys_speed(target);
+ if (retval != ERROR_OK)
+ {
+ return retval;
+ }
}
-
+
num_accesses += thisrun_accesses;
- }
+ }
break;
case 1:
while (num_accesses < count)
{
- u32 reg_list;
+ uint32_t reg_list;
thisrun_accesses = ((count - num_accesses) >= 14) ? 14 : (count - num_accesses);
reg_list = (0xffff >> (15 - thisrun_accesses)) & 0xfffe;
-
+
for (i = 1; i <= thisrun_accesses; i++)
{
if (i > last_reg)
last_reg = i;
reg[i] = *buffer++ & 0xff;
}
-
+
arm7_9->write_core_regs(target, reg_list, reg);
-
+
for (i = 1; i <= thisrun_accesses; i++)
{
arm7_9->store_byte_reg(target, i);
* from a sufficiently high clock (32 kHz is usually too slow)
*/
if (arm7_9->fast_memory_access)
- arm7_9_execute_fast_sys_speed(target);
+ retval = arm7_9_execute_fast_sys_speed(target);
else
- arm7_9_execute_sys_speed(target);
+ retval = arm7_9_execute_sys_speed(target);
+ if (retval != ERROR_OK)
+ {
+ return retval;
+ }
+
}
-
+
num_accesses += thisrun_accesses;
- }
+ }
break;
default:
LOG_ERROR("BUG: we shouldn't get here");
exit(-1);
break;
}
-
+
/* Re-Set DBGACK */
buf_set_u32(dbg_ctrl->value, EICE_DBG_CONTROL_DBGACK, 1, 1);
embeddedice_store_reg(dbg_ctrl);
-
+
if (armv4_5_mode_to_number(armv4_5->core_mode)==-1)
return ERROR_FAIL;
if (((cpsr & 0x1f) == ARMV4_5_MODE_ABT) && (armv4_5->core_mode != ARMV4_5_MODE_ABT))
{
- LOG_WARNING("memory write caused data abort (address: 0x%8.8x, size: 0x%x, count: 0x%x)", address, size, count);
+ LOG_WARNING("memory write caused data abort (address: 0x%8.8" PRIx32 ", size: 0x%" PRIx32 ", count: 0x%" PRIx32 ")", address, size, count);
arm7_9->write_xpsr_im8(target, buf_get_u32(armv4_5->core_cache->reg_list[ARMV4_5_CPSR].value, 0, 8) & ~0x20, 0, 0);
return ERROR_TARGET_DATA_ABORT;
}
-
+
return ERROR_OK;
}
-static const u32 dcc_code[] =
+static int dcc_count;
+static uint8_t *dcc_buffer;
+
+static int arm7_9_dcc_completion(struct target_s *target, uint32_t exit_point, int timeout_ms, void *arch_info)
+{
+ int retval = ERROR_OK;
+ armv4_5_common_t *armv4_5 = target->arch_info;
+ arm7_9_common_t *arm7_9 = armv4_5->arch_info;
+
+ if ((retval=target_wait_state(target, TARGET_DEBUG_RUNNING, 500))!=ERROR_OK)
+ return retval;
+
+ int little=target->endianness==TARGET_LITTLE_ENDIAN;
+ int count=dcc_count;
+ uint8_t *buffer=dcc_buffer;
+ if (count>2)
+ {
+ /* Handle first & last using standard embeddedice_write_reg and the middle ones w/the
+ * core function repeated. */
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_COMMS_DATA], fast_target_buffer_get_u32(buffer, little));
+ buffer+=4;
+
+ embeddedice_reg_t *ice_reg = arm7_9->eice_cache->reg_list[EICE_COMMS_DATA].arch_info;
+ uint8_t reg_addr = ice_reg->addr & 0x1f;
+ jtag_tap_t *tap;
+ tap = ice_reg->jtag_info->tap;
+
+ embeddedice_write_dcc(tap, reg_addr, buffer, little, count-2);
+ buffer += (count-2)*4;
+
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_COMMS_DATA], fast_target_buffer_get_u32(buffer, little));
+ } else
+ {
+ int i;
+ for (i = 0; i < count; i++)
+ {
+ embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_COMMS_DATA], fast_target_buffer_get_u32(buffer, little));
+ buffer += 4;
+ }
+ }
+
+ if ((retval = target_halt(target))!= ERROR_OK)
+ {
+ return retval;
+ }
+ return target_wait_state(target, TARGET_HALTED, 500);
+}
+
+static const uint32_t dcc_code[] =
{
/* MRC TST BNE MRC STR B */
0xee101e10, 0xe3110001, 0x0afffffc, 0xee111e10, 0xe4801004, 0xeafffff9
};
-int arm7_9_bulk_write_memory(target_t *target, u32 address, u32 count, u8 *buffer)
+int armv4_5_run_algorithm_inner(struct target_s *target, int num_mem_params, mem_param_t *mem_params, int num_reg_params, reg_param_t *reg_params, uint32_t entry_point, uint32_t exit_point, int timeout_ms, void *arch_info, int (*run_it)(struct target_s *target, uint32_t exit_point, int timeout_ms, void *arch_info));
+
+int arm7_9_bulk_write_memory(target_t *target, uint32_t address, uint32_t count, uint8_t *buffer)
{
+ int retval;
armv4_5_common_t *armv4_5 = target->arch_info;
arm7_9_common_t *arm7_9 = armv4_5->arch_info;
- enum armv4_5_state core_state = armv4_5->core_state;
- u32 r0 = buf_get_u32(armv4_5->core_cache->reg_list[0].value, 0, 32);
- u32 r1 = buf_get_u32(armv4_5->core_cache->reg_list[1].value, 0, 32);
- u32 pc = buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32);
int i;
-
+
if (!arm7_9->dcc_downloads)
- return target->type->write_memory(target, address, 4, count, buffer);
+ return target_write_memory(target, address, 4, count, buffer);
/* regrab previously allocated working_area, or allocate a new one */
if (!arm7_9->dcc_working_area)
{
- u8 dcc_code_buf[6 * 4];
-
+ uint8_t dcc_code_buf[6 * 4];
+
/* make sure we have a working area */
if (target_alloc_working_area(target, 24, &arm7_9->dcc_working_area) != ERROR_OK)
{
LOG_INFO("no working area available, falling back to memory writes");
- return target->type->write_memory(target, address, 4, count, buffer);
+ return target_write_memory(target, address, 4, count, buffer);
}
-
+
/* copy target instructions to target endianness */
for (i = 0; i < 6; i++)
{
target_buffer_set_u32(target, dcc_code_buf + i*4, dcc_code[i]);
}
-
- /* write DCC code to working area */
- target->type->write_memory(target, arm7_9->dcc_working_area->address, 4, 6, dcc_code_buf);
- }
-
- buf_set_u32(armv4_5->core_cache->reg_list[0].value, 0, 32, address);
- armv4_5->core_cache->reg_list[0].valid = 1;
- armv4_5->core_cache->reg_list[0].dirty = 1;
- armv4_5->core_state = ARMV4_5_STATE_ARM;
- arm7_9_resume(target, 0, arm7_9->dcc_working_area->address, 1, 1);
-
- int little=target->endianness==TARGET_LITTLE_ENDIAN;
- if (count>2)
- {
- /* Handle first & last using standard embeddedice_write_reg and the middle ones w/the
- core function repeated.
- */
- embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_COMMS_DATA], fast_target_buffer_get_u32(buffer, little));
- buffer+=4;
-
- embeddedice_reg_t *ice_reg = arm7_9->eice_cache->reg_list[EICE_COMMS_DATA].arch_info;
- u8 reg_addr = ice_reg->addr & 0x1f;
- int chain_pos = ice_reg->jtag_info->chain_pos;
- /* we want the compiler to duplicate the code, which it does not
- * do automatically.
- */
- if (little)
- {
- for (i = 1; i < count - 1; i++)
- {
- embeddedice_write_reg_inner(chain_pos, reg_addr, fast_target_buffer_get_u32(buffer, little));
- buffer += 4;
- }
- } else
+ /* write DCC code to working area */
+ if ((retval = target_write_memory(target, arm7_9->dcc_working_area->address, 4, 6, dcc_code_buf)) != ERROR_OK)
{
- for (i = 1; i < count - 1; i++)
- {
- embeddedice_write_reg_inner(chain_pos, reg_addr, fast_target_buffer_get_u32(buffer, little));
- buffer += 4;
- }
+ return retval;
}
- embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_COMMS_DATA], fast_target_buffer_get_u32(buffer, little));
- } else
+ }
+
+ armv4_5_algorithm_t armv4_5_info;
+ reg_param_t reg_params[1];
+
+ armv4_5_info.common_magic = ARMV4_5_COMMON_MAGIC;
+ armv4_5_info.core_mode = ARMV4_5_MODE_SVC;
+ armv4_5_info.core_state = ARMV4_5_STATE_ARM;
+
+ init_reg_param(®_params[0], "r0", 32, PARAM_IN_OUT);
+
+ buf_set_u32(reg_params[0].value, 0, 32, address);
+
+ dcc_count=count;
+ dcc_buffer=buffer;
+ retval = armv4_5_run_algorithm_inner(target, 0, NULL, 1, reg_params,
+ arm7_9->dcc_working_area->address, arm7_9->dcc_working_area->address+6*4, 20*1000, &armv4_5_info, arm7_9_dcc_completion);
+
+ if (retval==ERROR_OK)
{
- for (i = 0; i < count; i++)
+ uint32_t endaddress=buf_get_u32(reg_params[0].value, 0, 32);
+ if (endaddress!=(address+count*4))
{
- embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_COMMS_DATA], fast_target_buffer_get_u32(buffer, little));
- buffer += 4;
+ LOG_ERROR("DCC write failed, expected end address 0x%08" PRIx32 " got 0x%0" PRIx32 "", (address+count*4), endaddress);
+ retval=ERROR_FAIL;
}
}
-
- target_halt(target);
-
- for (i=0; i<100; i++)
- {
- target_poll(target);
- if (target->state == TARGET_HALTED)
- break;
- usleep(1000); /* sleep 1ms */
- }
- if (i == 100)
- {
- LOG_ERROR("bulk write timed out, target not halted");
- return ERROR_TARGET_TIMEOUT;
- }
-
- /* restore target state */
- buf_set_u32(armv4_5->core_cache->reg_list[0].value, 0, 32, r0);
- armv4_5->core_cache->reg_list[0].valid = 1;
- armv4_5->core_cache->reg_list[0].dirty = 1;
- buf_set_u32(armv4_5->core_cache->reg_list[1].value, 0, 32, r1);
- armv4_5->core_cache->reg_list[1].valid = 1;
- armv4_5->core_cache->reg_list[1].dirty = 1;
- buf_set_u32(armv4_5->core_cache->reg_list[15].value, 0, 32, pc);
- armv4_5->core_cache->reg_list[15].valid = 1;
- armv4_5->core_cache->reg_list[15].dirty = 1;
- armv4_5->core_state = core_state;
-
- return ERROR_OK;
+
+ destroy_reg_param(®_params[0]);
+
+ return retval;
}
-int arm7_9_checksum_memory(struct target_s *target, u32 address, u32 count, u32* checksum)
+int arm7_9_checksum_memory(struct target_s *target, uint32_t address, uint32_t count, uint32_t* checksum)
{
working_area_t *crc_algorithm;
armv4_5_algorithm_t armv4_5_info;
reg_param_t reg_params[2];
int retval;
-
- u32 arm7_9_crc_code[] = {
+
+ uint32_t arm7_9_crc_code[] = {
0xE1A02000, /* mov r2, r0 */
0xE3E00000, /* mov r0, #0xffffffff */
0xE1A03001, /* mov r3, r1 */
0xEAFFFFFE, /* b end */
0x04C11DB7 /* CRC32XOR: .word 0x04C11DB7 */
};
-
- int i;
-
+
+ uint32_t i;
+
if (target_alloc_working_area(target, sizeof(arm7_9_crc_code), &crc_algorithm) != ERROR_OK)
{
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
-
+
/* convert flash writing code into a buffer in target endianness */
- for (i = 0; i < (sizeof(arm7_9_crc_code)/sizeof(u32)); i++)
- target_write_u32(target, crc_algorithm->address + i*sizeof(u32), arm7_9_crc_code[i]);
-
+ for (i = 0; i < (sizeof(arm7_9_crc_code)/sizeof(uint32_t)); i++)
+ {
+ if ((retval=target_write_u32(target, crc_algorithm->address + i*sizeof(uint32_t), arm7_9_crc_code[i]))!=ERROR_OK)
+ {
+ return retval;
+ }
+ }
+
armv4_5_info.common_magic = ARMV4_5_COMMON_MAGIC;
armv4_5_info.core_mode = ARMV4_5_MODE_SVC;
armv4_5_info.core_state = ARMV4_5_STATE_ARM;
-
+
init_reg_param(®_params[0], "r0", 32, PARAM_IN_OUT);
init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
-
+
buf_set_u32(reg_params[0].value, 0, 32, address);
buf_set_u32(reg_params[1].value, 0, 32, count);
-
- if ((retval = target->type->run_algorithm(target, 0, NULL, 2, reg_params,
+
+ if ((retval = target_run_algorithm(target, 0, NULL, 2, reg_params,
crc_algorithm->address, crc_algorithm->address + (sizeof(arm7_9_crc_code) - 8), 20000, &armv4_5_info)) != ERROR_OK)
{
LOG_ERROR("error executing arm7_9 crc algorithm");
target_free_working_area(target, crc_algorithm);
return retval;
}
-
+
*checksum = buf_get_u32(reg_params[0].value, 0, 32);
-
+
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
-
+
target_free_working_area(target, crc_algorithm);
-
+
return ERROR_OK;
}
-int arm7_9_blank_check_memory(struct target_s *target, u32 address, u32 count, u32* blank)
+int arm7_9_blank_check_memory(struct target_s *target, uint32_t address, uint32_t count, uint32_t* blank)
{
working_area_t *erase_check_algorithm;
reg_param_t reg_params[3];
armv4_5_algorithm_t armv4_5_info;
int retval;
- int i;
-
- u32 erase_check_code[] =
+ uint32_t i;
+
+ uint32_t erase_check_code[] =
{
/* loop: */
0xe4d03001, /* ldrb r3, [r0], #1 */
{
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
-
+
/* convert flash writing code into a buffer in target endianness */
- for (i = 0; i < (sizeof(erase_check_code)/sizeof(u32)); i++)
- target_write_u32(target, erase_check_algorithm->address + i*sizeof(u32), erase_check_code[i]);
-
+ for (i = 0; i < (sizeof(erase_check_code)/sizeof(uint32_t)); i++)
+ if ((retval = target_write_u32(target, erase_check_algorithm->address + i*sizeof(uint32_t), erase_check_code[i])) != ERROR_OK)
+ {
+ return retval;
+ }
+
armv4_5_info.common_magic = ARMV4_5_COMMON_MAGIC;
armv4_5_info.core_mode = ARMV4_5_MODE_SVC;
armv4_5_info.core_state = ARMV4_5_STATE_ARM;
init_reg_param(®_params[2], "r2", 32, PARAM_IN_OUT);
buf_set_u32(reg_params[2].value, 0, 32, 0xff);
-
- if ((retval = target->type->run_algorithm(target, 0, NULL, 3, reg_params,
+
+ if ((retval = target_run_algorithm(target, 0, NULL, 3, reg_params,
erase_check_algorithm->address, erase_check_algorithm->address + (sizeof(erase_check_code) - 4), 10000, &armv4_5_info)) != ERROR_OK)
{
destroy_reg_param(®_params[0]);
target_free_working_area(target, erase_check_algorithm);
return 0;
}
-
+
*blank = buf_get_u32(reg_params[2].value, 0, 32);
-
+
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
destroy_reg_param(®_params[2]);
-
+
target_free_working_area(target, erase_check_algorithm);
-
+
return ERROR_OK;
}
int arm7_9_register_commands(struct command_context_s *cmd_ctx)
{
command_t *arm7_9_cmd;
-
+
arm7_9_cmd = register_command(cmd_ctx, NULL, "arm7_9", NULL, COMMAND_ANY, "arm7/9 specific commands");
register_command(cmd_ctx, arm7_9_cmd, "write_xpsr", handle_arm7_9_write_xpsr_command, COMMAND_EXEC, "write program status register <value> <not cpsr|spsr>");
register_command(cmd_ctx, arm7_9_cmd, "write_xpsr_im8", handle_arm7_9_write_xpsr_im8_command, COMMAND_EXEC, "write program status register <8bit immediate> <rotate> <not cpsr|spsr>");
-
- register_command(cmd_ctx, arm7_9_cmd, "write_core_reg", handle_arm7_9_write_core_reg_command, COMMAND_EXEC, "write core register <num> <mode> <value>");
-
- register_command(cmd_ctx, arm7_9_cmd, "sw_bkpts", handle_arm7_9_sw_bkpts_command, COMMAND_EXEC, "support for software breakpoints <enable|disable>");
- register_command(cmd_ctx, arm7_9_cmd, "force_hw_bkpts", handle_arm7_9_force_hw_bkpts_command, COMMAND_EXEC, "use hardware breakpoints for all breakpoints (disables sw breakpoint support) <enable|disable>");
+
+ register_command(cmd_ctx, arm7_9_cmd, "write_core_reg", handle_arm7_9_write_core_reg_command, COMMAND_EXEC, "write core register <num> <mode> <value>");
+
register_command(cmd_ctx, arm7_9_cmd, "dbgrq", handle_arm7_9_dbgrq_command,
COMMAND_ANY, "use EmbeddedICE dbgrq instead of breakpoint for target halt requests <enable|disable>");
- register_command(cmd_ctx, arm7_9_cmd, "fast_writes", handle_arm7_9_fast_memory_access_command,
- COMMAND_ANY, "(deprecated, see: arm7_9 fast_memory_access)");
register_command(cmd_ctx, arm7_9_cmd, "fast_memory_access", handle_arm7_9_fast_memory_access_command,
- COMMAND_ANY, "use fast memory accesses instead of slower but potentially unsafe slow accesses <enable|disable>");
+ COMMAND_ANY, "use fast memory accesses instead of slower but potentially safer accesses <enable|disable>");
register_command(cmd_ctx, arm7_9_cmd, "dcc_downloads", handle_arm7_9_dcc_downloads_command,
COMMAND_ANY, "use DCC downloads for larger memory writes <enable|disable>");
armv4_5_register_commands(cmd_ctx);
-
+
etm_register_commands(cmd_ctx);
-
+
return ERROR_OK;
}
int handle_arm7_9_write_xpsr_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
{
- u32 value;
+ uint32_t value;
int spsr;
int retval;
target_t *target = get_current_target(cmd_ctx);
command_print(cmd_ctx, "current target isn't an ARM7/ARM9 target");
return ERROR_OK;
}
-
+
if (target->state != TARGET_HALTED)
{
command_print(cmd_ctx, "can't write registers while running");
return ERROR_OK;
}
-
+
if (argc < 2)
{
command_print(cmd_ctx, "usage: write_xpsr <value> <not cpsr|spsr>");
return ERROR_OK;
}
-
+
value = strtoul(args[0], NULL, 0);
spsr = strtol(args[1], NULL, 0);
-
+
/* if we're writing the CPSR, mask the T bit */
if (!spsr)
value &= ~0x20;
-
+
arm7_9->write_xpsr(target, value, spsr);
if ((retval = jtag_execute_queue()) != ERROR_OK)
{
LOG_ERROR("JTAG error while writing to xpsr");
return retval;
}
-
+
return ERROR_OK;
}
int handle_arm7_9_write_xpsr_im8_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
{
- u32 value;
+ uint32_t value;
int rotate;
int spsr;
int retval;
command_print(cmd_ctx, "current target isn't an ARM7/ARM9 target");
return ERROR_OK;
}
-
+
if (target->state != TARGET_HALTED)
{
command_print(cmd_ctx, "can't write registers while running");
return ERROR_OK;
}
-
+
if (argc < 3)
{
command_print(cmd_ctx, "usage: write_xpsr_im8 <im8> <rotate> <not cpsr|spsr>");
return ERROR_OK;
}
-
+
value = strtoul(args[0], NULL, 0);
rotate = strtol(args[1], NULL, 0);
spsr = strtol(args[2], NULL, 0);
-
+
arm7_9->write_xpsr_im8(target, value, rotate, spsr);
if ((retval = jtag_execute_queue()) != ERROR_OK)
{
LOG_ERROR("JTAG error while writing 8-bit immediate to xpsr");
return retval;
}
-
+
return ERROR_OK;
}
int handle_arm7_9_write_core_reg_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
{
- u32 value;
- u32 mode;
+ uint32_t value;
+ uint32_t mode;
int num;
target_t *target = get_current_target(cmd_ctx);
armv4_5_common_t *armv4_5;
arm7_9_common_t *arm7_9;
-
+
if (arm7_9_get_arch_pointers(target, &armv4_5, &arm7_9) != ERROR_OK)
{
command_print(cmd_ctx, "current target isn't an ARM7/ARM9 target");
return ERROR_OK;
}
-
+
if (target->state != TARGET_HALTED)
{
command_print(cmd_ctx, "can't write registers while running");
return ERROR_OK;
}
-
+
if (argc < 3)
{
command_print(cmd_ctx, "usage: write_core_reg <num> <mode> <value>");
return ERROR_OK;
}
-
+
num = strtol(args[0], NULL, 0);
mode = strtoul(args[1], NULL, 0);
value = strtoul(args[2], NULL, 0);
-
- arm7_9_write_core_reg(target, num, mode, value);
-
- return ERROR_OK;
-}
-
-int handle_arm7_9_sw_bkpts_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- target_t *target = get_current_target(cmd_ctx);
- armv4_5_common_t *armv4_5;
- arm7_9_common_t *arm7_9;
-
- if (target->state != TARGET_HALTED)
- {
- LOG_ERROR("target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
-
- if (arm7_9_get_arch_pointers(target, &armv4_5, &arm7_9) != ERROR_OK)
- {
- command_print(cmd_ctx, "current target isn't an ARM7/ARM9 target");
- return ERROR_OK;
- }
-
- if (argc == 0)
- {
- command_print(cmd_ctx, "software breakpoints %s", (arm7_9->sw_bkpts_enabled) ? "enabled" : "disabled");
- return ERROR_OK;
- }
-
- if (strcmp("enable", args[0]) == 0)
- {
- if (arm7_9->sw_bkpts_use_wp)
- {
- arm7_9_enable_sw_bkpts(target);
- }
- else
- {
- arm7_9->sw_bkpts_enabled = 1;
- }
- }
- else if (strcmp("disable", args[0]) == 0)
- {
- if (arm7_9->sw_bkpts_use_wp)
- {
- arm7_9_disable_sw_bkpts(target);
- }
- else
- {
- arm7_9->sw_bkpts_enabled = 0;
- }
- }
- else
- {
- command_print(cmd_ctx, "usage: arm7_9 sw_bkpts <enable|disable>");
- }
-
- command_print(cmd_ctx, "software breakpoints %s", (arm7_9->sw_bkpts_enabled) ? "enabled" : "disabled");
-
- return ERROR_OK;
-}
-
-int handle_arm7_9_force_hw_bkpts_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- target_t *target = get_current_target(cmd_ctx);
- armv4_5_common_t *armv4_5;
- arm7_9_common_t *arm7_9;
-
- if (arm7_9_get_arch_pointers(target, &armv4_5, &arm7_9) != ERROR_OK)
- {
- command_print(cmd_ctx, "current target isn't an ARM7/ARM9 target");
- return ERROR_OK;
- }
-
- if ((argc >= 1) && (strcmp("enable", args[0]) == 0))
- {
- arm7_9->force_hw_bkpts = 1;
- if (arm7_9->sw_bkpts_use_wp)
- {
- arm7_9_disable_sw_bkpts(target);
- }
- }
- else if ((argc >= 1) && (strcmp("disable", args[0]) == 0))
- {
- arm7_9->force_hw_bkpts = 0;
- }
- else
- {
- command_print(cmd_ctx, "usage: arm7_9 force_hw_bkpts <enable|disable>");
- }
-
- command_print(cmd_ctx, "force hardware breakpoints %s", (arm7_9->force_hw_bkpts) ? "enabled" : "disabled");
- return ERROR_OK;
+ return arm7_9_write_core_reg(target, num, mode, value);
}
int handle_arm7_9_dbgrq_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
target_t *target = get_current_target(cmd_ctx);
armv4_5_common_t *armv4_5;
arm7_9_common_t *arm7_9;
-
+
if (arm7_9_get_arch_pointers(target, &armv4_5, &arm7_9) != ERROR_OK)
{
command_print(cmd_ctx, "current target isn't an ARM7/ARM9 target");
return ERROR_OK;
}
-
+
if (argc > 0)
{
if (strcmp("enable", args[0]) == 0)
command_print(cmd_ctx, "usage: arm7_9 dbgrq <enable|disable>");
}
}
-
+
command_print(cmd_ctx, "use of EmbeddedICE dbgrq instead of breakpoint for target halt %s", (arm7_9->use_dbgrq) ? "enabled" : "disabled");
return ERROR_OK;
target_t *target = get_current_target(cmd_ctx);
armv4_5_common_t *armv4_5;
arm7_9_common_t *arm7_9;
-
+
if (arm7_9_get_arch_pointers(target, &armv4_5, &arm7_9) != ERROR_OK)
{
command_print(cmd_ctx, "current target isn't an ARM7/ARM9 target");
return ERROR_OK;
}
-
+
if (argc > 0)
{
if (strcmp("enable", args[0]) == 0)
command_print(cmd_ctx, "usage: arm7_9 fast_memory_access <enable|disable>");
}
}
-
+
command_print(cmd_ctx, "fast memory access is %s", (arm7_9->fast_memory_access) ? "enabled" : "disabled");
return ERROR_OK;
target_t *target = get_current_target(cmd_ctx);
armv4_5_common_t *armv4_5;
arm7_9_common_t *arm7_9;
-
+
if (arm7_9_get_arch_pointers(target, &armv4_5, &arm7_9) != ERROR_OK)
{
command_print(cmd_ctx, "current target isn't an ARM7/ARM9 target");
return ERROR_OK;
}
-
+
if (argc > 0)
{
if (strcmp("enable", args[0]) == 0)
command_print(cmd_ctx, "usage: arm7_9 dcc_downloads <enable|disable>");
}
}
-
+
command_print(cmd_ctx, "dcc downloads are %s", (arm7_9->dcc_downloads) ? "enabled" : "disabled");
return ERROR_OK;
int arm7_9_init_arch_info(target_t *target, arm7_9_common_t *arm7_9)
{
+ int retval = ERROR_OK;
armv4_5_common_t *armv4_5 = &arm7_9->armv4_5_common;
-
+
arm7_9->common_magic = ARM7_9_COMMON_MAGIC;
-
- arm_jtag_setup_connection(&arm7_9->jtag_info);
- arm7_9->wp_available = 2;
+
+ if ((retval = arm_jtag_setup_connection(&arm7_9->jtag_info)) != ERROR_OK)
+ {
+ return retval;
+ }
+
+ arm7_9->wp_available = 0; /* this is set up in arm7_9_clear_watchpoints() */
+ arm7_9->wp_available_max = 2;
+ arm7_9->sw_breakpoints_added = 0;
+ arm7_9->breakpoint_count = 0;
arm7_9->wp0_used = 0;
arm7_9->wp1_used = 0;
- arm7_9->force_hw_bkpts = 0;
+ arm7_9->wp1_used_default = 0;
arm7_9->use_dbgrq = 0;
-
+
arm7_9->etm_ctx = NULL;
arm7_9->has_single_step = 0;
arm7_9->has_monitor_mode = 0;
arm7_9->has_vector_catch = 0;
-
+
arm7_9->debug_entry_from_reset = 0;
-
+
arm7_9->dcc_working_area = NULL;
-
+
arm7_9->fast_memory_access = fast_and_dangerous;
arm7_9->dcc_downloads = fast_and_dangerous;
-
+
arm7_9->need_bypass_before_restart = 0;
-
+
armv4_5->arch_info = arm7_9;
armv4_5->read_core_reg = arm7_9_read_core_reg;
armv4_5->write_core_reg = arm7_9_write_core_reg;
armv4_5->full_context = arm7_9_full_context;
-
- armv4_5_init_arch_info(target, armv4_5);
-
- target_register_timer_callback(arm7_9_handle_target_request, 1, 1, target);
-
+
+ if ((retval = armv4_5_init_arch_info(target, armv4_5)) != ERROR_OK)
+ {
+ return retval;
+ }
+
+ if ((retval = target_register_timer_callback(arm7_9_handle_target_request, 1, 1, target)) != ERROR_OK)
+ {
+ return retval;
+ }
+
return ERROR_OK;
}
projects / fw / openocd / blobdiff