/**
* @file
* This file implements JTAG transport support for cores implementing
- the ARM Debug Interface version 5 (ADIv5).
+ the ARM Debug Interface version 5 (ADIv5) and version 6 (ADIv6).
*/
#ifdef HAVE_CONFIG_H
#define JTAG_DP_IDCODE 0xFE
/* three-bit ACK values for DPACC and APACC reads */
-#define JTAG_ACK_OK_FAULT 0x2
-#define JTAG_ACK_WAIT 0x1
+#define JTAG_ACK_WAIT 0x1 /* ADIv5 and ADIv6 */
+#define JTAG_ACK_OK_FAULT 0x2 /* ADIv5 */
+#define JTAG_ACK_FAULT 0x2 /* ADIv6 */
+#define JTAG_ACK_OK 0x4 /* ADIV6 */
static int jtag_ap_q_abort(struct adiv5_dap *dap, uint8_t *ack);
uint8_t *invalue;
uint8_t ack;
uint32_t memaccess_tck;
- uint32_t dp_select;
+ uint64_t dp_select;
struct scan_field fields[2];
uint8_t out_addr_buf;
static void log_dap_cmd(struct adiv5_dap *dap, const char *header, struct dap_cmd *el)
{
#ifdef DEBUG_WAIT
+ const char *ack;
+ switch (el->ack) {
+ case JTAG_ACK_WAIT: /* ADIv5 and ADIv6 */
+ ack = "WAIT";
+ break;
+ case JTAG_ACK_OK_FAULT: /* ADIv5, same value as JTAG_ACK_FAULT */
+ /* case JTAG_ACK_FAULT: */ /* ADIv6 */
+ if (is_adiv6(dap))
+ ack = "FAULT";
+ else
+ ack = "OK";
+ break;
+ case JTAG_ACK_OK: /* ADIv6 */
+ if (is_adiv6(dap)) {
+ ack = "OK";
+ break;
+ }
+ /* fall-through */
+ default:
+ ack = "INVAL";
+ break;
+ }
LOG_DEBUG("%s: %2s %6s %5s 0x%08x 0x%08x %2s", header,
el->instr == JTAG_DP_APACC ? "AP" : "DP",
dap_reg_name(dap, el->instr, el->reg_addr),
el->rnw == DPAP_READ ? "READ" : "WRITE",
buf_get_u32(el->outvalue_buf, 0, 32),
buf_get_u32(el->invalue, 0, 32),
- el->ack == JTAG_ACK_OK_FAULT ? "OK" :
- (el->ack == JTAG_ACK_WAIT ? "WAIT" : "INVAL"));
+ ack);
#endif
}
/* Add specified number of tck clocks after starting memory bus
* access, giving the hardware time to complete the access.
* They provide more time for the (MEM) AP to complete the read ...
- * See "Minimum Response Time" for JTAG-DP, in the ADIv5 spec.
+ * See "Minimum Response Time" for JTAG-DP, in the ADIv5/ADIv6 spec.
*/
if (cmd->instr == JTAG_DP_APACC) {
if ((cmd->reg_addr == MEM_AP_REG_DRW(dap) ||
/**
* Scan DPACC or APACC using target ordered uint8_t buffers. No endianness
- * conversions are performed. See section 4.4.3 of the ADIv5 spec, which
+ * conversions are performed. See section 4.4.3 of the ADIv5/ADIv6 spec, which
* discusses operations which access these registers.
*
* Note that only one scan is performed. If rnw is set, a separate scan
* must be different).
*/
static int adi_jtag_dp_scan_u32(struct adiv5_dap *dap,
- uint8_t instr, uint8_t reg_addr, uint8_t rnw,
+ uint8_t instr, uint16_t reg_addr, uint8_t rnw,
uint32_t outvalue, uint32_t *invalue,
uint32_t memaccess_tck, uint8_t *ack)
{
uint8_t out_value_buf[4];
int retval;
-
+ uint64_t sel = (reg_addr >> 4) & 0xf;
+
+ /* No need to change SELECT or RDBUFF as they are not banked */
+ if (instr == JTAG_DP_DPACC && reg_addr != DP_SELECT && reg_addr != DP_RDBUFF &&
+ sel != (dap->select & 0xf)) {
+ if (dap->select != DP_SELECT_INVALID)
+ sel |= dap->select & ~0xfull;
+ dap->select = sel;
+ LOG_DEBUG("DP BANKSEL: %x", (uint32_t)sel);
+ buf_set_u32(out_value_buf, 0, 32, (uint32_t)sel);
+ retval = adi_jtag_dp_scan(dap, JTAG_DP_DPACC,
+ DP_SELECT, DPAP_WRITE, out_value_buf, NULL, 0, NULL);
+ if (retval != ERROR_OK)
+ return retval;
+ }
buf_set_u32(out_value_buf, 0, 32, outvalue);
retval = adi_jtag_dp_scan(dap, instr, reg_addr, rnw,
/* skip all completed transactions up to the first WAIT */
list_for_each_entry(el, &dap->cmd_journal, lh) {
- if (el->ack == JTAG_ACK_OK_FAULT) {
+ /*
+ * JTAG_ACK_OK_FAULT (ADIv5) and JTAG_ACK_FAULT (ADIv6) are equal so
+ * the following statement is checking to see if an acknowledgment of
+ * OK or FAULT is generated for ADIv5 or ADIv6
+ */
+ if (el->ack == JTAG_ACK_OK_FAULT || (is_adiv6(dap) && el->ack == JTAG_ACK_OK)) {
log_dap_cmd(dap, "LOG", el);
} else if (el->ack == JTAG_ACK_WAIT) {
found_wait = 1;
* the result of the previous READ */
tmp = el;
list_for_each_entry_from(tmp, &dap->cmd_journal, lh) {
- if (tmp->ack == JTAG_ACK_OK_FAULT) {
+ /* The following check covers OK and FAULT ACKs for both ADIv5 and ADIv6 */
+ if (tmp->ack == JTAG_ACK_OK_FAULT || (is_adiv6(dap) && tmp->ack == JTAG_ACK_OK)) {
/* recover the read value */
log_dap_cmd(dap, "FND", tmp);
if (el->invalue != el->invalue_buf) {
retval = adi_jtag_dp_scan_cmd_sync(dap, tmp, NULL);
if (retval != ERROR_OK)
break;
- if (tmp->ack == JTAG_ACK_OK_FAULT) {
+ /* The following check covers OK and FAULT ACKs for both ADIv5 and ADIv6 */
+ if (tmp->ack == JTAG_ACK_OK_FAULT || (is_adiv6(dap) && tmp->ack == JTAG_ACK_OK)) {
log_dap_cmd(dap, "FND", tmp);
if (el->invalue != el->invalue_buf) {
uint32_t invalue = le_to_h_u32(tmp->invalue);
if (retval == ERROR_OK) {
/* timeout happened */
- if (tmp->ack != JTAG_ACK_OK_FAULT) {
+ if (tmp->ack == JTAG_ACK_WAIT) {
LOG_ERROR("Timeout during WAIT recovery");
dap->select = DP_SELECT_INVALID;
jtag_ap_q_abort(dap, NULL);
if (retval != ERROR_OK)
break;
log_dap_cmd(dap, "REC", el);
- if (el->ack == JTAG_ACK_OK_FAULT) {
+ if (el->ack == JTAG_ACK_OK_FAULT || (is_adiv6(dap) && el->ack == JTAG_ACK_OK)) {
if (el->invalue != el->invalue_buf) {
uint32_t invalue = le_to_h_u32(el->invalue);
memcpy(el->invalue, &invalue, sizeof(uint32_t));
} while (timeval_ms() - time_now < 1000);
if (retval == ERROR_OK) {
- if (el->ack != JTAG_ACK_OK_FAULT) {
+ if (el->ack == JTAG_ACK_WAIT) {
LOG_ERROR("Timeout during WAIT recovery");
dap->select = DP_SELECT_INVALID;
jtag_ap_q_abort(dap, NULL);
/** Select the AP register bank matching bits 7:4 of reg. */
static int jtag_ap_q_bankselect(struct adiv5_ap *ap, unsigned reg)
{
+ int retval;
struct adiv5_dap *dap = ap->dap;
- uint32_t sel = ((uint32_t)ap->ap_num << 24) | (reg & 0x000000F0);
+ uint64_t sel;
+
+ if (is_adiv6(dap)) {
+ sel = ap->ap_num | (reg & 0x00000FF0);
+ if (sel == (dap->select & ~0xfull))
+ return ERROR_OK;
+
+ if (dap->select != DP_SELECT_INVALID)
+ sel |= dap->select & 0xf;
+ dap->select = sel;
+ LOG_DEBUG("AP BANKSEL: %" PRIx64, sel);
+
+ retval = jtag_dp_q_write(dap, DP_SELECT, (uint32_t)sel);
+ if (retval != ERROR_OK)
+ return retval;
+
+ if (dap->asize > 32)
+ return jtag_dp_q_write(dap, DP_SELECT1, (uint32_t)(sel >> 32));
+ return ERROR_OK;
+ }
+
+ /* ADIv5 */
+ sel = (ap->ap_num << 24) | (reg & 0x000000F0);
if (sel == dap->select)
return ERROR_OK;
dap->select = sel;
- return jtag_dp_q_write(dap, DP_SELECT, sel);
+ return jtag_dp_q_write(dap, DP_SELECT, (uint32_t)sel);
}
static int jtag_ap_q_read(struct adiv5_ap *ap, unsigned reg,