target_addr_t virt, target_addr_t *phys);
static int aarch64_read_apb_ap_memory(struct target *target,
uint64_t address, uint32_t size, uint32_t count, uint8_t *buffer);
-static int aarch64_instr_write_data_r0(struct arm_dpm *dpm,
- uint32_t opcode, uint32_t data);
static int aarch64_restore_system_control_reg(struct target *target)
{
return aarch64_poll(target);
}
-/* To reduce needless round-trips, pass in a pointer to the current
- * DSCR value. Initialize it to zero if you just need to know the
- * value on return from this function; or DSCR_ITE if you
- * happen to know that no instruction is pending.
- */
-static int aarch64_exec_opcode(struct target *target,
- uint32_t opcode, uint32_t *dscr_p)
-{
- uint32_t dscr;
- int retval;
- struct armv8_common *armv8 = target_to_armv8(target);
- dscr = dscr_p ? *dscr_p : 0;
-
- LOG_DEBUG("exec opcode 0x%08" PRIx32, opcode);
-
- /* Wait for InstrCompl bit to be set */
- long long then = timeval_ms();
- while ((dscr & DSCR_ITE) == 0) {
- retval = mem_ap_read_atomic_u32(armv8->debug_ap,
- armv8->debug_base + CPUV8_DBG_DSCR, &dscr);
- if (retval != ERROR_OK) {
- LOG_ERROR("Could not read DSCR register, opcode = 0x%08" PRIx32, opcode);
- return retval;
- }
- if (timeval_ms() > then + 1000) {
- LOG_ERROR("Timeout waiting for aarch64_exec_opcode");
- return ERROR_FAIL;
- }
- }
-
- retval = mem_ap_write_u32(armv8->debug_ap,
- armv8->debug_base + CPUV8_DBG_ITR, opcode);
- if (retval != ERROR_OK)
- return retval;
-
- then = timeval_ms();
- do {
- retval = mem_ap_read_atomic_u32(armv8->debug_ap,
- armv8->debug_base + CPUV8_DBG_DSCR, &dscr);
- if (retval != ERROR_OK) {
- LOG_ERROR("Could not read DSCR register");
- return retval;
- }
- if (timeval_ms() > then + 1000) {
- LOG_ERROR("Timeout waiting for aarch64_exec_opcode");
- return ERROR_FAIL;
- }
- } while ((dscr & DSCR_ITE) == 0); /* Wait for InstrCompl bit to be set */
-
- if (dscr_p)
- *dscr_p = dscr;
-
- return retval;
-}
-
/* Write to memory mapped registers directly with no cache or mmu handling */
static int aarch64_dap_write_memap_register_u32(struct target *target,
uint32_t address,
return retval;
}
-/*
- * AARCH64 implementation of Debug Programmer's Model
- *
- * NOTE the invariant: these routines return with DSCR_ITE set,
- * so there's no need to poll for it before executing an instruction.
- *
- * NOTE that in several of these cases the "stall" mode might be useful.
- * It'd let us queue a few operations together... prepare/finish might
- * be the places to enable/disable that mode.
- */
-
-static inline struct aarch64_common *dpm_to_a8(struct arm_dpm *dpm)
-{
- return container_of(dpm, struct aarch64_common, armv8_common.dpm);
-}
-
-static int aarch64_write_dcc(struct armv8_common *armv8, uint32_t data)
-{
- LOG_DEBUG("write DCC 0x%08" PRIx32, data);
- return mem_ap_write_u32(armv8->debug_ap,
- armv8->debug_base + CPUV8_DBG_DTRRX, data);
-}
-
-static int aarch64_write_dcc_64(struct armv8_common *armv8, uint64_t data)
-{
- int ret;
- LOG_DEBUG("write DCC Low word0x%08" PRIx32, (unsigned)data);
- LOG_DEBUG("write DCC High word 0x%08" PRIx32, (unsigned)(data >> 32));
- ret = mem_ap_write_u32(armv8->debug_ap,
- armv8->debug_base + CPUV8_DBG_DTRRX, data);
- ret += mem_ap_write_u32(armv8->debug_ap,
- armv8->debug_base + CPUV8_DBG_DTRTX, data >> 32);
- return ret;
-}
-
-static int aarch64_read_dcc(struct armv8_common *armv8, uint32_t *data,
- uint32_t *dscr_p)
-{
- uint32_t dscr = DSCR_ITE;
- int retval;
-
- if (dscr_p)
- dscr = *dscr_p;
-
- /* Wait for DTRRXfull */
- long long then = timeval_ms();
- while ((dscr & DSCR_DTR_TX_FULL) == 0) {
- retval = mem_ap_read_atomic_u32(armv8->debug_ap,
- armv8->debug_base + CPUV8_DBG_DSCR,
- &dscr);
- if (retval != ERROR_OK)
- return retval;
- if (timeval_ms() > then + 1000) {
- LOG_ERROR("Timeout waiting for read dcc");
- return ERROR_FAIL;
- }
- }
-
- retval = mem_ap_read_atomic_u32(armv8->debug_ap,
- armv8->debug_base + CPUV8_DBG_DTRTX,
- data);
- if (retval != ERROR_OK)
- return retval;
- LOG_DEBUG("read DCC 0x%08" PRIx32, *data);
-
- if (dscr_p)
- *dscr_p = dscr;
-
- return retval;
-}
-
-static int aarch64_read_dcc_64(struct armv8_common *armv8, uint64_t *data,
- uint32_t *dscr_p)
-{
- uint32_t dscr = DSCR_ITE;
- uint32_t higher;
- int retval;
-
- if (dscr_p)
- dscr = *dscr_p;
-
- /* Wait for DTRRXfull */
- long long then = timeval_ms();
- while ((dscr & DSCR_DTR_TX_FULL) == 0) {
- retval = mem_ap_read_atomic_u32(armv8->debug_ap,
- armv8->debug_base + CPUV8_DBG_DSCR,
- &dscr);
- if (retval != ERROR_OK)
- return retval;
- if (timeval_ms() > then + 1000) {
- LOG_ERROR("Timeout waiting for read dcc");
- return ERROR_FAIL;
- }
- }
-
- retval = mem_ap_read_atomic_u32(armv8->debug_ap,
- armv8->debug_base + CPUV8_DBG_DTRTX,
- (uint32_t *)data);
- if (retval != ERROR_OK)
- return retval;
-
- retval = mem_ap_read_atomic_u32(armv8->debug_ap,
- armv8->debug_base + CPUV8_DBG_DTRRX,
- &higher);
- if (retval != ERROR_OK)
- return retval;
-
- *data = *(uint32_t *)data | (uint64_t)higher << 32;
- LOG_DEBUG("read DCC 0x%16.16" PRIx64, *data);
-
- if (dscr_p)
- *dscr_p = dscr;
-
- return retval;
-}
-
-static int aarch64_dpm_prepare(struct arm_dpm *dpm)
-{
- struct aarch64_common *a8 = dpm_to_a8(dpm);
- uint32_t dscr;
- int retval;
-
- /* set up invariant: INSTR_COMP is set after ever DPM operation */
- long long then = timeval_ms();
- for (;; ) {
- retval = mem_ap_read_atomic_u32(a8->armv8_common.debug_ap,
- a8->armv8_common.debug_base + CPUV8_DBG_DSCR,
- &dscr);
- if (retval != ERROR_OK)
- return retval;
- if ((dscr & DSCR_ITE) != 0)
- break;
- if (timeval_ms() > then + 1000) {
- LOG_ERROR("Timeout waiting for dpm prepare");
- return ERROR_FAIL;
- }
- }
-
- /* this "should never happen" ... */
- if (dscr & DSCR_DTR_RX_FULL) {
- LOG_ERROR("DSCR_DTR_RX_FULL, dscr 0x%08" PRIx32, dscr);
- /* Clear DCCRX */
- retval = mem_ap_read_u32(a8->armv8_common.debug_ap,
- a8->armv8_common.debug_base + CPUV8_DBG_DTRRX, &dscr);
- if (retval != ERROR_OK)
- return retval;
-
- /* Clear sticky error */
- retval = mem_ap_write_u32(a8->armv8_common.debug_ap,
- a8->armv8_common.debug_base + CPUV8_DBG_DRCR, DRCR_CSE);
- if (retval != ERROR_OK)
- return retval;
- }
-
- return retval;
-}
-
-static int aarch64_dpm_finish(struct arm_dpm *dpm)
-{
- /* REVISIT what could be done here? */
- return ERROR_OK;
-}
-
-static int aarch64_instr_execute(struct arm_dpm *dpm,
- uint32_t opcode)
-{
- struct aarch64_common *a8 = dpm_to_a8(dpm);
- uint32_t dscr = DSCR_ITE;
-
- return aarch64_exec_opcode(
- a8->armv8_common.arm.target,
- opcode,
- &dscr);
-}
-
-static int aarch64_instr_write_data_dcc(struct arm_dpm *dpm,
- uint32_t opcode, uint32_t data)
-{
- struct aarch64_common *a8 = dpm_to_a8(dpm);
- int retval;
- uint32_t dscr = DSCR_ITE;
-
- retval = aarch64_write_dcc(&a8->armv8_common, data);
- if (retval != ERROR_OK)
- return retval;
-
- return aarch64_exec_opcode(
- a8->armv8_common.arm.target,
- opcode,
- &dscr);
-}
-
-static int aarch64_instr_write_data_dcc_64(struct arm_dpm *dpm,
- uint32_t opcode, uint64_t data)
-{
- struct aarch64_common *a8 = dpm_to_a8(dpm);
- int retval;
- uint32_t dscr = DSCR_ITE;
-
- retval = aarch64_write_dcc_64(&a8->armv8_common, data);
- if (retval != ERROR_OK)
- return retval;
-
- return aarch64_exec_opcode(
- a8->armv8_common.arm.target,
- opcode,
- &dscr);
-}
-
-static int aarch64_instr_write_data_r0(struct arm_dpm *dpm,
- uint32_t opcode, uint32_t data)
-{
- struct aarch64_common *a8 = dpm_to_a8(dpm);
-
- uint32_t dscr = DSCR_ITE;
- int retval;
-
- retval = aarch64_write_dcc(&a8->armv8_common, data);
- if (retval != ERROR_OK)
- return retval;
-
- retval = aarch64_exec_opcode(
- a8->armv8_common.arm.target, armv8_opcode(&a8->armv8_common, READ_REG_DTRRX), &dscr);
- if (retval != ERROR_OK)
- return retval;
-
- /* then the opcode, taking data from R0 */
- retval = aarch64_exec_opcode(
- a8->armv8_common.arm.target,
- opcode,
- &dscr);
-
- return retval;
-}
-
-static int aarch64_instr_write_data_r0_64(struct arm_dpm *dpm,
- uint32_t opcode, uint64_t data)
+static int aarch64_dpm_setup(struct aarch64_common *a8, uint64_t debug)
{
- struct aarch64_common *a8 = dpm_to_a8(dpm);
- uint32_t dscr = DSCR_ITE;
+ struct arm_dpm *dpm = &a8->armv8_common.dpm;
int retval;
- retval = aarch64_write_dcc_64(&a8->armv8_common, data);
- if (retval != ERROR_OK)
- return retval;
-
- retval = aarch64_exec_opcode(
- a8->armv8_common.arm.target,
- ARMV8_MRS(SYSTEM_DBG_DBGDTR_EL0, 0),
- &dscr);
- if (retval != ERROR_OK)
- return retval;
+ dpm->arm = &a8->armv8_common.arm;
+ dpm->didr = debug;
- /* then the opcode, taking data from R0 */
- retval = aarch64_exec_opcode(
- a8->armv8_common.arm.target,
- opcode,
- &dscr);
+ retval = armv8_dpm_setup(dpm);
+ if (retval == ERROR_OK)
+ retval = armv8_dpm_initialize(dpm);
return retval;
}
-static int aarch64_instr_cpsr_sync(struct arm_dpm *dpm)
+static int aarch64_set_dscr_bits(struct target *target, unsigned long bit_mask, unsigned long value)
{
- struct target *target = dpm->arm->target;
struct armv8_common *armv8 = target_to_armv8(target);
- uint32_t dscr = DSCR_ITE;
-
- /* "Prefetch flush" after modifying execution status in CPSR */
- return aarch64_exec_opcode(target, armv8_opcode(armv8, ARMV8_OPC_DSB_SY), &dscr);
-}
-
-static int aarch64_instr_read_data_dcc(struct arm_dpm *dpm,
- uint32_t opcode, uint32_t *data)
-{
- struct aarch64_common *a8 = dpm_to_a8(dpm);
- int retval;
- uint32_t dscr = DSCR_ITE;
-
- /* the opcode, writing data to DCC */
- retval = aarch64_exec_opcode(
- a8->armv8_common.arm.target,
- opcode,
- &dscr);
- if (retval != ERROR_OK)
- return retval;
-
- return aarch64_read_dcc(&a8->armv8_common, data, &dscr);
-}
-
-static int aarch64_instr_read_data_dcc_64(struct arm_dpm *dpm,
- uint32_t opcode, uint64_t *data)
-{
- struct aarch64_common *a8 = dpm_to_a8(dpm);
- int retval;
- uint32_t dscr = DSCR_ITE;
-
- /* the opcode, writing data to DCC */
- retval = aarch64_exec_opcode(
- a8->armv8_common.arm.target,
- opcode,
- &dscr);
- if (retval != ERROR_OK)
- return retval;
-
- return aarch64_read_dcc_64(&a8->armv8_common, data, &dscr);
-}
-
-static int aarch64_instr_read_data_r0(struct arm_dpm *dpm,
- uint32_t opcode, uint32_t *data)
-{
- struct aarch64_common *a8 = dpm_to_a8(dpm);
- uint32_t dscr = DSCR_ITE;
- int retval;
-
- /* the opcode, writing data to R0 */
- retval = aarch64_exec_opcode(
- a8->armv8_common.arm.target,
- opcode,
- &dscr);
- if (retval != ERROR_OK)
- return retval;
-
- /* write R0 to DCC */
- retval = aarch64_exec_opcode(
- a8->armv8_common.arm.target, armv8_opcode(&a8->armv8_common, WRITE_REG_DTRTX), &dscr);
- if (retval != ERROR_OK)
- return retval;
-
- return aarch64_read_dcc(&a8->armv8_common, data, &dscr);
-}
-
-static int aarch64_instr_read_data_r0_64(struct arm_dpm *dpm,
- uint32_t opcode, uint64_t *data)
-{
- struct aarch64_common *a8 = dpm_to_a8(dpm);
- uint32_t dscr = DSCR_ITE;
- int retval;
-
- /* the opcode, writing data to R0 */
- retval = aarch64_exec_opcode(
- a8->armv8_common.arm.target,
- opcode,
- &dscr);
- if (retval != ERROR_OK)
- return retval;
+ uint32_t dscr;
- /* write R0 to DCC */
- retval = aarch64_exec_opcode(
- a8->armv8_common.arm.target,
- ARMV8_MSR_GP(SYSTEM_DBG_DBGDTR_EL0, 0), /* msr dbgdtr_el0, x0 */
- &dscr);
- if (retval != ERROR_OK)
+ /* Read DSCR */
+ int retval = mem_ap_read_atomic_u32(armv8->debug_ap,
+ armv8->debug_base + CPUV8_DBG_DSCR, &dscr);
+ if (ERROR_OK != retval)
return retval;
- return aarch64_read_dcc_64(&a8->armv8_common, data, &dscr);
-}
-
-static int aarch64_bpwp_enable(struct arm_dpm *dpm, unsigned index_t,
- uint32_t addr, uint32_t control)
-{
- struct aarch64_common *a8 = dpm_to_a8(dpm);
- uint32_t vr = a8->armv8_common.debug_base;
- uint32_t cr = a8->armv8_common.debug_base;
- int retval;
-
- switch (index_t) {
- case 0 ... 15: /* breakpoints */
- vr += CPUV8_DBG_BVR_BASE;
- cr += CPUV8_DBG_BCR_BASE;
- break;
- case 16 ... 31: /* watchpoints */
- vr += CPUV8_DBG_WVR_BASE;
- cr += CPUV8_DBG_WCR_BASE;
- index_t -= 16;
- break;
- default:
- return ERROR_FAIL;
- }
- vr += 16 * index_t;
- cr += 16 * index_t;
-
- LOG_DEBUG("A8: bpwp enable, vr %08x cr %08x",
- (unsigned) vr, (unsigned) cr);
+ /* clear bitfield */
+ dscr &= ~bit_mask;
+ /* put new value */
+ dscr |= value & bit_mask;
- retval = aarch64_dap_write_memap_register_u32(dpm->arm->target,
- vr, addr);
- if (retval != ERROR_OK)
- return retval;
- retval = aarch64_dap_write_memap_register_u32(dpm->arm->target,
- cr, control);
+ /* write new DSCR */
+ retval = mem_ap_write_atomic_u32(armv8->debug_ap,
+ armv8->debug_base + CPUV8_DBG_DSCR, dscr);
return retval;
}
-static int aarch64_bpwp_disable(struct arm_dpm *dpm, unsigned index_t)
-{
- struct aarch64_common *a = dpm_to_a8(dpm);
- uint32_t cr;
-
- switch (index_t) {
- case 0 ... 15:
- cr = a->armv8_common.debug_base + CPUV8_DBG_BCR_BASE;
- break;
- case 16 ... 31:
- cr = a->armv8_common.debug_base + CPUV8_DBG_WCR_BASE;
- index_t -= 16;
- break;
- default:
- return ERROR_FAIL;
- }
- cr += 16 * index_t;
-
- LOG_DEBUG("A: bpwp disable, cr %08x", (unsigned) cr);
-
- /* clear control register */
- return aarch64_dap_write_memap_register_u32(dpm->arm->target, cr, 0);
-
-}
-
-static int aarch64_dpm_setup(struct aarch64_common *a8, uint64_t debug)
-{
- struct arm_dpm *dpm = &a8->armv8_common.dpm;
- int retval;
-
- dpm->arm = &a8->armv8_common.arm;
- dpm->didr = debug;
-
- dpm->prepare = aarch64_dpm_prepare;
- dpm->finish = aarch64_dpm_finish;
-
- dpm->instr_execute = aarch64_instr_execute;
- dpm->instr_write_data_dcc = aarch64_instr_write_data_dcc;
- dpm->instr_write_data_dcc_64 = aarch64_instr_write_data_dcc_64;
- dpm->instr_write_data_r0 = aarch64_instr_write_data_r0;
- dpm->instr_write_data_r0_64 = aarch64_instr_write_data_r0_64;
- dpm->instr_cpsr_sync = aarch64_instr_cpsr_sync;
-
- dpm->instr_read_data_dcc = aarch64_instr_read_data_dcc;
- dpm->instr_read_data_dcc_64 = aarch64_instr_read_data_dcc_64;
- dpm->instr_read_data_r0 = aarch64_instr_read_data_r0;
- dpm->instr_read_data_r0_64 = aarch64_instr_read_data_r0_64;
-
- dpm->arm_reg_current = armv8_reg_current;
-
- dpm->bpwp_enable = aarch64_bpwp_enable;
- dpm->bpwp_disable = aarch64_bpwp_disable;
-
- retval = armv8_dpm_setup(dpm);
- if (retval == ERROR_OK)
- retval = armv8_dpm_initialize(dpm);
-
- return retval;
-}
static struct target *get_aarch64(struct target *target, int32_t coreid)
{
struct target_list *head;
struct armv8_common *armv8 = target_to_armv8(curr);
/* open the gate for channel 0 to let HALT requests pass to the CTM */
- if (curr->smp)
+ if (curr->smp) {
retval = mem_ap_write_atomic_u32(armv8->debug_ap,
armv8->cti_base + CTI_GATE, CTI_CHNL(0));
+ if (retval == ERROR_OK)
+ retval = aarch64_set_dscr_bits(curr, DSCR_HDE, DSCR_HDE);
+ }
if (retval != ERROR_OK)
break;
if (DSCR_RUN_MODE(dscr) == 0x3) {
if (prev_target_state != TARGET_HALTED) {
/* We have a halting debug event */
- LOG_DEBUG("Target halted");
+ LOG_DEBUG("Target %s halted", target_name(target));
target->state = TARGET_HALTED;
if ((prev_target_state == TARGET_RUNNING)
|| (prev_target_state == TARGET_UNKNOWN)
/*
* add HDE in halting debug mode
*/
- retval = mem_ap_read_atomic_u32(armv8->debug_ap,
- armv8->debug_base + CPUV8_DBG_DSCR, &dscr);
- if (retval == ERROR_OK)
- retval = mem_ap_write_atomic_u32(armv8->debug_ap,
- armv8->debug_base + CPUV8_DBG_DSCR, dscr | DSCR_HDE);
+ retval = aarch64_set_dscr_bits(target, DSCR_HDE, DSCR_HDE);
if (retval != ERROR_OK)
return retval;
LOG_ERROR("How do I resume into Jazelle state??");
return ERROR_FAIL;
}
- LOG_DEBUG("resume pc = 0x%16" PRIx64, resume_pc);
+ LOG_DEBUG("resume pc = 0x%016" PRIx64, resume_pc);
buf_set_u64(arm->pc->value, 0, 64, resume_pc);
arm->pc->dirty = 1;
arm->pc->valid = 1;
- dpmv8_modeswitch(&armv8->dpm, ARM_MODE_ANY);
/* called it now before restoring context because it uses cpu
* register r0 for restoring system control register */
retval = aarch64_restore_system_control_reg(target);
- if (retval != ERROR_OK)
- return retval;
- retval = aarch64_restore_context(target, handle_breakpoints);
- if (retval != ERROR_OK)
- return retval;
- target->debug_reason = DBG_REASON_NOTHALTED;
- target->state = TARGET_RUNNING;
-
- /* registers are now invalid */
- register_cache_invalidate(arm->core_cache);
+ if (retval == ERROR_OK)
+ retval = aarch64_restore_context(target, handle_breakpoints);
return retval;
}
return retval;
if ((dscr & DSCR_ITE) == 0)
- LOG_ERROR("DSCR InstrCompl must be set before leaving debug!");
+ LOG_ERROR("DSCR.ITE must be set before leaving debug!");
+ if ((dscr & DSCR_ERR) != 0)
+ LOG_ERROR("DSCR.ERR must be cleared before leaving debug!");
/* make sure to acknowledge the halt event before resuming */
retval = mem_ap_write_atomic_u32(armv8->debug_ap,
/* registers are now invalid */
register_cache_invalidate(arm->core_cache);
+ register_cache_invalidate(arm->core_cache->next);
return ERROR_OK;
}
int retval = ERROR_OK;
struct aarch64_common *aarch64 = target_to_aarch64(target);
struct armv8_common *armv8 = target_to_armv8(target);
+ struct arm_dpm *dpm = &armv8->dpm;
+ enum arm_state core_state;
- LOG_DEBUG("dscr = 0x%08" PRIx32, aarch64->cpudbg_dscr);
+ LOG_DEBUG("%s dscr = 0x%08" PRIx32, target_name(target), aarch64->cpudbg_dscr);
- /* REVISIT see A8 TRM 12.11.4 steps 2..3 -- make sure that any
- * imprecise data aborts get discarded by issuing a Data
- * Synchronization Barrier: ARMV4_5_MCR(15, 0, 0, 7, 10, 4).
- */
+ dpm->dscr = aarch64->cpudbg_dscr;
+ core_state = armv8_dpm_get_core_state(dpm);
+ armv8_select_opcodes(armv8, core_state == ARM_STATE_AARCH64);
+ armv8_select_reg_access(armv8, core_state == ARM_STATE_AARCH64);
/* make sure to clear all sticky errors */
retval = mem_ap_write_atomic_u32(armv8->debug_ap,
armv8->debug_base + CPUV8_DBG_DRCR, DRCR_CSE);
+
+ /* discard async exceptions */
+ if (retval == ERROR_OK)
+ retval = dpm->instr_cpsr_sync(dpm);
+
if (retval != ERROR_OK)
return retval;
/* Examine debug reason */
- armv8_dpm_report_dscr(&armv8->dpm, aarch64->cpudbg_dscr);
+ armv8_dpm_report_dscr(dpm, aarch64->cpudbg_dscr);
/* save address of instruction that triggered the watchpoint? */
if (target->debug_reason == DBG_REASON_WATCHPOINT) {
retval = armv8_dpm_read_current_registers(&armv8->dpm);
- if (armv8->post_debug_entry) {
+ if (retval == ERROR_OK && armv8->post_debug_entry)
retval = armv8->post_debug_entry(target);
- if (retval != ERROR_OK)
- return retval;
- }
return retval;
}
struct armv8_common *armv8 = &aarch64->armv8_common;
int retval;
- /* clear sticky errors */
- mem_ap_write_atomic_u32(armv8->debug_ap,
- armv8->debug_base + CPUV8_DBG_DRCR, DRCR_CSE);
-
switch (armv8->arm.core_mode) {
case ARMV8_64_EL0T:
+ armv8_dpm_modeswitch(&armv8->dpm, ARMV8_64_EL1H);
+ /* fall through */
case ARMV8_64_EL1T:
case ARMV8_64_EL1H:
retval = armv8->arm.mrs(target, 3, /*op 0*/
if (retval != ERROR_OK)
return retval;
break;
- default:
+
+ case ARM_MODE_SVC:
retval = armv8->arm.mrc(target, 15, 0, 0, 1, 0, &aarch64->system_control_reg);
if (retval != ERROR_OK)
return retval;
break;
+
+ default:
+ LOG_INFO("cannot read system control register in this mode");
+ break;
}
+ armv8_dpm_modeswitch(&armv8->dpm, ARM_MODE_ANY);
+
LOG_DEBUG("System_register: %8.8" PRIx32, aarch64->system_control_reg);
aarch64->system_control_reg_curr = aarch64->system_control_reg;
- if (armv8->armv8_mmu.armv8_cache.ctype == -1)
- armv8_identify_cache(target);
+ if (armv8->armv8_mmu.armv8_cache.info == -1) {
+ armv8_identify_cache(armv8);
+ armv8_read_mpidr(armv8);
+ }
armv8->armv8_mmu.mmu_enabled =
(aarch64->system_control_reg & 0x1U) ? 1 : 0;
return ERROR_OK;
}
-static int aarch64_set_dscr_bits(struct target *target, unsigned long bit_mask, unsigned long value)
-{
- struct armv8_common *armv8 = target_to_armv8(target);
- uint32_t dscr;
-
- /* Read DSCR */
- int retval = mem_ap_read_atomic_u32(armv8->debug_ap,
- armv8->debug_base + CPUV8_DBG_DSCR, &dscr);
- if (ERROR_OK != retval)
- return retval;
-
- /* clear bitfield */
- dscr &= ~bit_mask;
- /* put new value */
- dscr |= value & bit_mask;
-
- /* write new DSCR */
- retval = mem_ap_write_atomic_u32(armv8->debug_ap,
- armv8->debug_base + CPUV8_DBG_DSCR, dscr);
- return retval;
-}
-
static int aarch64_step(struct target *target, int current, target_addr_t address,
int handle_breakpoints)
{
{
struct armv8_common *armv8 = target_to_armv8(target);
- LOG_DEBUG(" ");
+ LOG_DEBUG("%s", target_name(target));
if (armv8->pre_restore_context)
armv8->pre_restore_context(target);
return armv8_dpm_write_dirty_registers(&armv8->dpm, bpwp);
-
}
/*
struct aarch64_common *aarch64 = target_to_aarch64(target);
struct armv8_common *armv8 = &aarch64->armv8_common;
struct aarch64_brp *brp_list = aarch64->brp_list;
- uint32_t dscr;
if (breakpoint->set) {
LOG_WARNING("breakpoint already set");
breakpoint->set = 0x11; /* Any nice value but 0 */
}
- retval = mem_ap_read_atomic_u32(armv8->debug_ap,
- armv8->debug_base + CPUV8_DBG_DSCR, &dscr);
/* Ensure that halting debug mode is enable */
- dscr = dscr | DSCR_HDE;
- retval = mem_ap_write_atomic_u32(armv8->debug_ap,
- armv8->debug_base + CPUV8_DBG_DSCR, dscr);
+ retval = aarch64_set_dscr_bits(target, DSCR_HDE, DSCR_HDE);
if (retval != ERROR_OK) {
LOG_DEBUG("Failed to set DSCR.HDE");
return retval;
/* write memory through APB-AP */
int retval = ERROR_COMMAND_SYNTAX_ERROR;
struct armv8_common *armv8 = target_to_armv8(target);
+ struct arm_dpm *dpm = &armv8->dpm;
struct arm *arm = &armv8->arm;
int total_bytes = count * size;
int total_u32;
uint32_t dscr;
uint8_t *tmp_buff = NULL;
- LOG_DEBUG("Writing APB-AP memory address 0x%" PRIx64 " size %" PRIu32 " count%" PRIu32,
+ LOG_DEBUG("Writing APB-AP memory address 0x%" PRIx64 " size %" PRIu32 " count %" PRIu32,
address, size, count);
+
if (target->state != TARGET_HALTED) {
LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
reg = armv8_reg_current(arm, 0);
reg->dirty = true;
- /* clear any abort */
- retval = mem_ap_write_atomic_u32(armv8->debug_ap,
- armv8->debug_base + CPUV8_DBG_DRCR, DRCR_CSE);
- if (retval != ERROR_OK)
- return retval;
-
-
/* This algorithm comes from DDI0487A.g, chapter J9.1 */
/* The algorithm only copies 32 bit words, so the buffer
if (arm->core_state == ARM_STATE_AARCH64) {
/* Write X0 with value 'address' using write procedure */
/* Step 1.a+b - Write the address for read access into DBGDTR_EL0 */
- retval += aarch64_write_dcc_64(armv8, address & ~0x3ULL);
/* Step 1.c - Copy value from DTR to R0 using instruction mrs DBGDTR_EL0, x0 */
- retval += aarch64_exec_opcode(target,
- ARMV8_MRS(SYSTEM_DBG_DBGDTR_EL0, 0), &dscr);
+ retval = dpm->instr_write_data_dcc_64(dpm,
+ ARMV8_MRS(SYSTEM_DBG_DBGDTR_EL0, 0), address & ~0x3ULL);
} else {
/* Write R0 with value 'address' using write procedure */
/* Step 1.a+b - Write the address for read access into DBGDTRRX */
- retval += aarch64_write_dcc(armv8, address & ~0x3ULL);
/* Step 1.c - Copy value from DTR to R0 using instruction mrc DBGDTRTXint, r0 */
- retval += aarch64_exec_opcode(target,
- T32_FMTITR(ARMV4_5_MRC(14, 0, 0, 0, 5, 0)), &dscr);
+ dpm->instr_write_data_dcc(dpm,
+ ARMV4_5_MRC(14, 0, 0, 0, 5, 0), address & ~0x3ULL);
}
/* Step 1.d - Change DCC to memory mode */
armv8->debug_base + CPUV8_DBG_DSCR, &dscr);
if (retval != ERROR_OK)
goto error_free_buff_w;
+
+ dpm->dscr = dscr;
if (dscr & (DSCR_ERR | DSCR_SYS_ERROR_PEND)) {
/* Abort occurred - clear it and exit */
LOG_ERROR("abort occurred - dscr = 0x%08" PRIx32, dscr);
- mem_ap_write_atomic_u32(armv8->debug_ap,
- armv8->debug_base + CPUV8_DBG_DRCR, 1<<2);
+ armv8_dpm_handle_exception(dpm);
goto error_free_buff_w;
}
/* read memory through APB-AP */
int retval = ERROR_COMMAND_SYNTAX_ERROR;
struct armv8_common *armv8 = target_to_armv8(target);
+ struct arm_dpm *dpm = &armv8->dpm;
struct arm *arm = &armv8->arm;
int total_bytes = count * size;
int total_u32;
uint8_t *u8buf_ptr;
uint32_t value;
- LOG_DEBUG("Reading APB-AP memory address 0x%" TARGET_PRIxADDR " size %" PRIu32 " count%" PRIu32,
+ LOG_DEBUG("Reading APB-AP memory address 0x%" TARGET_PRIxADDR " size %" PRIu32 " count %" PRIu32,
address, size, count);
+
if (target->state != TARGET_HALTED) {
LOG_WARNING("target not halted");
return ERROR_TARGET_NOT_HALTED;
reg = armv8_reg_current(arm, 0);
reg->dirty = true;
- /* clear any abort */
- retval = mem_ap_write_atomic_u32(armv8->debug_ap,
- armv8->debug_base + CPUV8_DBG_DRCR, DRCR_CSE);
- if (retval != ERROR_OK)
- goto error_free_buff_r;
-
/* Read DSCR */
retval = mem_ap_read_atomic_u32(armv8->debug_ap,
armv8->debug_base + CPUV8_DBG_DSCR, &dscr);
if (arm->core_state == ARM_STATE_AARCH64) {
/* Write X0 with value 'address' using write procedure */
/* Step 1.a+b - Write the address for read access into DBGDTR_EL0 */
- retval += aarch64_write_dcc_64(armv8, address & ~0x3ULL);
/* Step 1.c - Copy value from DTR to R0 using instruction mrs DBGDTR_EL0, x0 */
- retval += aarch64_exec_opcode(target, ARMV8_MRS(SYSTEM_DBG_DBGDTR_EL0, 0), &dscr);
+ retval += dpm->instr_write_data_dcc_64(dpm,
+ ARMV8_MRS(SYSTEM_DBG_DBGDTR_EL0, 0), address & ~0x3ULL);
/* Step 1.d - Dummy operation to ensure EDSCR.Txfull == 1 */
- retval += aarch64_exec_opcode(target, ARMV8_MSR_GP(SYSTEM_DBG_DBGDTR_EL0, 0), &dscr);
+ retval += dpm->instr_execute(dpm, ARMV8_MSR_GP(SYSTEM_DBG_DBGDTR_EL0, 0));
/* Step 1.e - Change DCC to memory mode */
dscr = dscr | DSCR_MA;
retval += mem_ap_write_atomic_u32(armv8->debug_ap,
} else {
/* Write R0 with value 'address' using write procedure */
/* Step 1.a+b - Write the address for read access into DBGDTRRXint */
- retval += aarch64_write_dcc(armv8, address & ~0x3ULL);
/* Step 1.c - Copy value from DTR to R0 using instruction mrc DBGDTRTXint, r0 */
- retval += aarch64_exec_opcode(target,
- T32_FMTITR(ARMV4_5_MRC(14, 0, 0, 0, 5, 0)), &dscr);
+ retval += dpm->instr_write_data_dcc(dpm,
+ ARMV4_5_MRC(14, 0, 0, 0, 5, 0), address & ~0x3ULL);
/* Step 1.d - Dummy operation to ensure EDSCR.Txfull == 1 */
- retval += aarch64_exec_opcode(target,
- T32_FMTITR(ARMV4_5_MCR(14, 0, 0, 0, 5, 0)), &dscr);
+ retval += dpm->instr_execute(dpm, ARMV4_5_MCR(14, 0, 0, 0, 5, 0));
/* Step 1.e - Change DCC to memory mode */
dscr = dscr | DSCR_MA;
retval += mem_ap_write_atomic_u32(armv8->debug_ap,
armv8->debug_base + CPUV8_DBG_DSCR, &dscr);
if (retval != ERROR_OK)
goto error_free_buff_r;
+
+ dpm->dscr = dscr;
+
if (dscr & (DSCR_ERR | DSCR_SYS_ERROR_PEND)) {
/* Abort occurred - clear it and exit */
LOG_ERROR("abort occurred - dscr = 0x%08" PRIx32, dscr);
- mem_ap_write_atomic_u32(armv8->debug_ap,
- armv8->debug_base + CPUV8_DBG_DRCR, DRCR_CSE);
+ armv8_dpm_handle_exception(dpm);
goto error_free_buff_r;
}
static int aarch64_virt2phys(struct target *target, target_addr_t virt,
target_addr_t *phys)
{
- return armv8_mmu_translate_va(target, virt, phys);
+ return armv8_mmu_translate_va_pa(target, virt, phys, 1);
}
COMMAND_HANDLER(aarch64_handle_cache_info_command)
projects / fw / openocd / blobdiff