#include <ao.h>
-struct ao_stm_usart {
- struct ao_fifo rx_fifo;
- struct ao_fifo tx_fifo;
- struct stm_usart *reg;
- uint8_t tx_started;
-};
-
void
ao_debug_out(char c)
{
}
static void
-ao_usart_tx_start(struct ao_stm_usart *usart)
+_ao_usart_tx_start(struct ao_stm_usart *usart)
{
if (!ao_fifo_empty(usart->tx_fifo) && !usart->tx_started)
{
}
if (sr & (1 << STM_USART_SR_TC)) {
usart->tx_started = 0;
- ao_usart_tx_start(usart);
+ _ao_usart_tx_start(usart);
ao_wakeup(&usart->tx_fifo);
}
}
+int
+_ao_usart_pollchar(struct ao_stm_usart *usart)
+{
+ int c;
+
+ if (ao_fifo_empty(usart->rx_fifo))
+ c = AO_READ_AGAIN;
+ else {
+ uint8_t u;
+ ao_fifo_remove(usart->rx_fifo,u);
+ c = u;
+ }
+ return c;
+}
+
char
ao_usart_getchar(struct ao_stm_usart *usart)
{
- char c;
- cli();
- while (ao_fifo_empty(usart->rx_fifo))
+ int c;
+ ao_arch_block_interrupts();
+ while ((c = _ao_usart_pollchar(usart)) == AO_READ_AGAIN)
ao_sleep(&usart->rx_fifo);
- ao_fifo_remove(usart->rx_fifo, c);
- sei();
- return c;
+ ao_arch_release_interrupts();
+ return (char) c;
}
-char
-ao_usart_pollchar(struct ao_stm_usart *usart)
+static inline uint8_t
+_ao_usart_sleep_for(struct ao_stm_usart *usart, uint16_t timeout)
{
- char c;
- cli();
- if (ao_fifo_empty(usart->rx_fifo)) {
- sei();
- return AO_READ_AGAIN;
- }
- ao_fifo_remove(usart->rx_fifo,c);
- sei();
- return c;
+ return ao_sleep_for(&usart->rx_fifo, timeout);
}
void
ao_usart_putchar(struct ao_stm_usart *usart, char c)
{
- cli();
+ ao_arch_block_interrupts();
while (ao_fifo_full(usart->tx_fifo))
ao_sleep(&usart->tx_fifo);
ao_fifo_insert(usart->tx_fifo, c);
- ao_usart_tx_start(usart);
- sei();
+ _ao_usart_tx_start(usart);
+ ao_arch_release_interrupts();
}
void
ao_usart_drain(struct ao_stm_usart *usart)
{
- cli();
+ ao_arch_block_interrupts();
while (!ao_fifo_empty(usart->tx_fifo))
ao_sleep(&usart->tx_fifo);
- sei();
+ ao_arch_release_interrupts();
}
static const struct {
uint32_t brr;
} ao_usart_speeds[] = {
[AO_SERIAL_SPEED_4800] = {
- STM_APB1 / 4800
+ AO_PCLK1 / 4800
},
[AO_SERIAL_SPEED_9600] = {
- STM_APB1 / 9600
+ AO_PCLK1 / 9600
},
[AO_SERIAL_SPEED_19200] = {
- STM_APB1 / 19200
+ AO_PCLK1 / 19200
},
[AO_SERIAL_SPEED_57600] = {
- STM_APB1 / 57600
+ AO_PCLK1 / 57600
+ },
+ [AO_SERIAL_SPEED_115200] = {
+ AO_PCLK1 / 115200
},
};
void
ao_usart_set_speed(struct ao_stm_usart *usart, uint8_t speed)
{
- if (speed > AO_SERIAL_SPEED_57600)
+ if (speed > AO_SERIAL_SPEED_115200)
return;
usart->reg->brr = ao_usart_speeds[speed].brr;
}
ao_usart_set_speed(usart, AO_SERIAL_SPEED_9600);
}
+void
+ao_usart_set_flow(struct ao_stm_usart *usart)
+{
+ usart->reg->cr3 |= ((1 << STM_USART_CR3_CTSE) |
+ (1 << STM_USART_CR3_RTSE));
+}
+
#if HAS_SERIAL_1
struct ao_stm_usart ao_stm_usart1;
ao_usart_putchar(&ao_stm_usart1, c);
}
-char
-ao_serial1_pollchar(void)
+int
+_ao_serial1_pollchar(void)
+{
+ return _ao_usart_pollchar(&ao_stm_usart1);
+}
+
+uint8_t
+_ao_serial1_sleep_for(uint16_t timeout)
+{
+ return _ao_usart_sleep_for(&ao_stm_usart1, timeout);
+}
+
+void
+ao_serial1_drain(void)
{
- return ao_usart_pollchar(&ao_stm_usart1);
+ ao_usart_drain(&ao_stm_usart1);
}
void
ao_usart_putchar(&ao_stm_usart2, c);
}
-char
-ao_serial2_pollchar(void)
+int
+_ao_serial2_pollchar(void)
+{
+ return _ao_usart_pollchar(&ao_stm_usart2);
+}
+
+uint8_t
+_ao_serial2_sleep_for(uint16_t timeout)
+{
+ return _ao_usart_sleep_for(&ao_stm_usart2, timeout);
+}
+
+void
+ao_serial2_drain(void)
{
- return ao_usart_pollchar(&ao_stm_usart2);
+ ao_usart_drain(&ao_stm_usart2);
}
void
struct ao_stm_usart ao_stm_usart3;
-void stm_usart3_isr(void) { ao_usart_isr(&ao_stm_usart3, USE_SERIAL_3_STDIN); }
+void stm_usart3_isr(void) { ao_usart_isr(&ao_stm_usart3, USE_SERIAL_2_STDIN); }
char
ao_serial3_getchar(void)
ao_usart_putchar(&ao_stm_usart3, c);
}
-char
-ao_serial3_pollchar(void)
+int
+_ao_serial3_pollchar(void)
{
- return ao_usart_pollchar(&ao_stm_usart3);
+ return _ao_usart_pollchar(&ao_stm_usart3);
+}
+
+uint8_t
+_ao_serial3_sleep_for(uint16_t timeout)
+{
+ return _ao_usart_sleep_for(&ao_stm_usart3, timeout);
}
void
stm_nvic_set_enable(STM_ISR_USART1_POS);
stm_nvic_set_priority(STM_ISR_USART1_POS, 4);
-#if USE_SERIAL_1_STDIN
- ao_add_stdio(ao_serial1_pollchar,
+#if USE_SERIAL_1_STDIN && !DELAY_SERIAL_1_STDIN
+ ao_add_stdio(_ao_serial1_pollchar,
ao_serial1_putchar,
NULL);
#endif
stm_afr_set(&stm_gpioa, 2, STM_AFR_AF7);
stm_afr_set(&stm_gpioa, 3, STM_AFR_AF7);
+#if USE_SERIAL_2_FLOW
+ stm_afr_set(&stm_gpioa, 0, STM_AFR_AF7);
+ stm_afr_set(&stm_gpioa, 1, STM_AFR_AF7);
+#endif
#else
#if SERIAL_2_PD5_PD6
stm_rcc.ahbenr |= (1 << STM_RCC_AHBENR_GPIODEN);
stm_afr_set(&stm_gpiod, 5, STM_AFR_AF7);
stm_afr_set(&stm_gpiod, 6, STM_AFR_AF7);
+#if USE_SERIAL_2_FLOW
+#error "Don't know how to set flowcontrol for serial 2 on PD"
+#endif
#else
#error "No SERIAL_2 port configuration specified"
-#endif
+#endif
#endif
/* Enable USART */
stm_rcc.apb1enr |= (1 << STM_RCC_APB1ENR_USART2EN);
ao_stm_usart2.reg = &stm_usart2;
ao_usart_init(&ao_stm_usart2);
+#if USE_SERIAL_2_FLOW
+ ao_usart_set_flow(&ao_stm_usart2);
+#endif
stm_nvic_set_enable(STM_ISR_USART2_POS);
stm_nvic_set_priority(STM_ISR_USART2_POS, 4);
-#if USE_SERIAL_2_STDIN
- ao_add_stdio(ao_serial2_pollchar,
+#if USE_SERIAL_2_STDIN && !DELAY_SERIAL_2_STDIN
+ ao_add_stdio(_ao_serial2_pollchar,
ao_serial2_putchar,
NULL);
#endif
stm_nvic_set_enable(STM_ISR_USART3_POS);
stm_nvic_set_priority(STM_ISR_USART3_POS, 4);
-#if USE_SERIAL_3_STDIN
- ao_add_stdio(ao_serial3_pollchar,
+#if USE_SERIAL_3_STDIN && !DELAY_SERIAL_3_STDIN
+ ao_add_stdio(_ao_serial3_pollchar,
ao_serial3_putchar,
NULL);
#endif
#endif
}
-
-