#include <ao.h>
-__xdata struct ao_fifo ao_usart1_rx_fifo;
-__xdata struct ao_fifo ao_usart1_tx_fifo;
+struct ao_stm_usart {
+ struct ao_fifo rx_fifo;
+ struct ao_fifo tx_fifo;
+ struct stm_usart *reg;
+ uint8_t tx_started;
+};
void
ao_debug_out(char c)
stm_usart1.dr = c;
}
-void
-outbyte(char c)
-{
- putchar(c);
-}
-
-static __xdata uint8_t ao_serial_tx1_started;
-
static void
-ao_serial_tx1_start(void)
+ao_usart_tx_start(struct ao_stm_usart *usart)
{
- if (!ao_fifo_empty(ao_usart1_tx_fifo) &&
- !ao_serial_tx1_started)
+ if (!ao_fifo_empty(usart->tx_fifo) && !usart->tx_started)
{
- ao_serial_tx1_started = 1;
- ao_fifo_remove(ao_usart1_tx_fifo, stm_usart1.dr);
+ usart->tx_started = 1;
+ ao_fifo_remove(usart->tx_fifo, usart->reg->dr);
}
}
-void stm_usart1_isr(void)
+static void
+ao_usart_isr(struct ao_stm_usart *usart, int stdin)
{
uint32_t sr;
- cli();
- sr = stm_usart1.sr;
- stm_usart1.sr = 0;
- sei();
+
+ sr = usart->reg->sr;
+ usart->reg->sr = 0;
+
if (sr & (1 << STM_USART_SR_RXNE)) {
- if (!ao_fifo_full(ao_usart1_rx_fifo))
- ao_fifo_insert(ao_usart1_rx_fifo, stm_usart1.dr);
- ao_wakeup(&ao_usart1_rx_fifo);
-#if USE_SERIAL_STDIN
- ao_wakeup(&ao_stdin_ready);
-#endif
+ char c = usart->reg->dr;
+ if (!ao_fifo_full(usart->rx_fifo))
+ ao_fifo_insert(usart->rx_fifo, c);
+ ao_wakeup(&usart->rx_fifo);
+ if (stdin)
+ ao_wakeup(&ao_stdin_ready);
}
- if (sr & (1 << STM_USART_SR_TXE)) {
- ao_serial_tx1_started = 0;
- ao_serial_tx1_start();
- ao_wakeup(&ao_usart1_tx_fifo);
+ if (sr & (1 << STM_USART_SR_TC)) {
+ usart->tx_started = 0;
+ ao_usart_tx_start(usart);
+ ao_wakeup(&usart->tx_fifo);
}
}
char
-ao_serial_getchar(void) __critical
+ao_usart_getchar(struct ao_stm_usart *usart)
{
- char c;
+ char c;
cli();
- while (ao_fifo_empty(ao_usart1_rx_fifo))
- ao_sleep(&ao_usart1_rx_fifo);
- ao_fifo_remove(ao_usart1_rx_fifo, c);
+ while (ao_fifo_empty(usart->rx_fifo))
+ ao_sleep(&usart->rx_fifo);
+ ao_fifo_remove(usart->rx_fifo, c);
sei();
return c;
}
-#if USE_SERIAL_STDIN
char
-ao_serial_pollchar(void) __critical
+ao_usart_pollchar(struct ao_stm_usart *usart)
{
char c;
cli();
- if (ao_fifo_empty(ao_usart1_rx_fifo)) {
+ if (ao_fifo_empty(usart->rx_fifo)) {
sei();
return AO_READ_AGAIN;
}
- ao_fifo_remove(ao_usart1_rx_fifo,c);
+ ao_fifo_remove(usart->rx_fifo,c);
sei();
return c;
}
-#endif
void
-ao_serial_putchar(char c) __critical
+ao_usart_putchar(struct ao_stm_usart *usart, char c)
{
cli();
- while (ao_fifo_full(ao_usart1_tx_fifo))
- ao_sleep(&ao_usart1_tx_fifo);
- ao_fifo_insert(ao_usart1_tx_fifo, c);
- ao_serial_tx1_start();
+ while (ao_fifo_full(usart->tx_fifo))
+ ao_sleep(&usart->tx_fifo);
+ ao_fifo_insert(usart->tx_fifo, c);
+ ao_usart_tx_start(usart);
sei();
}
void
-ao_serial_drain(void) __critical
+ao_usart_drain(struct ao_stm_usart *usart)
{
cli();
- while (!ao_fifo_empty(ao_usart1_tx_fifo))
- ao_sleep(&ao_usart1_tx_fifo);
+ while (!ao_fifo_empty(usart->tx_fifo))
+ ao_sleep(&usart->tx_fifo);
sei();
}
-int _write(int file, char *ptr, int len)
-{
- int l = len;
- while (l--)
- ao_debug_out(*ptr++);
- return len;
-}
-
static const struct {
uint32_t brr;
-} ao_serial_speeds[] = {
+} ao_usart_speeds[] = {
[AO_SERIAL_SPEED_4800] = {
STM_APB1 / 4800
},
};
void
-ao_serial_set_speed(uint8_t speed)
+ao_usart_set_speed(struct ao_stm_usart *usart, uint8_t speed)
{
-#if 0
- ao_serial_drain();
-#endif
if (speed > AO_SERIAL_SPEED_57600)
return;
- stm_usart1.brr = ao_serial_speeds[speed].brr;
+ stm_usart1.brr = ao_usart_speeds[speed].brr;
}
void
-ao_serial_init(void)
+ao_usart_init(struct ao_stm_usart *usart)
{
- stm_rcc.ahbenr |= (1 << STM_RCC_AHBENR_GPIOAEN);
-
- stm_moder_set(&stm_gpioa, 9, STM_MODER_ALTERNATE);
- stm_moder_set(&stm_gpioa, 10, STM_MODER_ALTERNATE);
- stm_afr_set(&stm_gpioa, 9, STM_AFR_AF7);
- stm_afr_set(&stm_gpioa, 10, STM_AFR_AF7);
-
- /* Enable USART1 */
- stm_rcc.apb2enr |= (1 << STM_RCC_APB2ENR_USART1EN);
-
- stm_usart1.cr1 = ((0 << STM_USART_CR1_OVER8) |
+ usart->reg->cr1 = ((0 << STM_USART_CR1_OVER8) |
(1 << STM_USART_CR1_UE) |
(0 << STM_USART_CR1_M) |
(0 << STM_USART_CR1_WAKE) |
(0 << STM_USART_CR1_PCE) |
(0 << STM_USART_CR1_PS) |
(0 << STM_USART_CR1_PEIE) |
- (1 << STM_USART_CR1_TXEIE) |
- (0 << STM_USART_CR1_TCIE) |
+ (0 << STM_USART_CR1_TXEIE) |
+ (1 << STM_USART_CR1_TCIE) |
(1 << STM_USART_CR1_RXNEIE) |
(0 << STM_USART_CR1_IDLEIE) |
(1 << STM_USART_CR1_TE) |
(0 << STM_USART_CR1_RWU) |
(0 << STM_USART_CR1_SBK));
- stm_usart1.cr2 = ((0 << STM_USART_CR2_LINEN) |
+ usart->reg->cr2 = ((0 << STM_USART_CR2_LINEN) |
(STM_USART_CR2_STOP_1 << STM_USART_CR2_STOP) |
(0 << STM_USART_CR2_CLKEN) |
(0 << STM_USART_CR2_CPOL) |
(0 << STM_USART_CR2_LBDL) |
(0 << STM_USART_CR2_ADD));
- stm_usart1.cr3 = ((0 << STM_USART_CR3_ONEBITE) |
+ usart->reg->cr3 = ((0 << STM_USART_CR3_ONEBITE) |
(0 << STM_USART_CR3_CTSIE) |
(0 << STM_USART_CR3_CTSE) |
(0 << STM_USART_CR3_RTSE) |
(0 << STM_USART_CR3_EIE));
/* Pick a 9600 baud rate */
- ao_serial_set_speed(AO_SERIAL_SPEED_9600);
+ ao_usart_set_speed(usart, AO_SERIAL_SPEED_9600);
+}
+
+#if HAS_SERIAL_1
+struct ao_stm_usart ao_stm_usart1;
+void stm_usart1_isr(void) { ao_usart_isr(&ao_stm_usart1, USE_SERIAL_STDIN); }
+#endif
+#if HAS_SERIAL_2
+struct ao_stm_usart ao_stm_usart2;
+void stm_usart2_isr(void) { ao_usart_isr(&ao_stm_usart2, 0); }
+#endif
+#if HAS_SERIAL_3
+struct ao_stm_usart ao_stm_usart3;
+void stm_usart3_isr(void) { ao_usart_isr(&ao_stm_usart3, 0); }
+#endif
+
+void
+ao_serial_init(void)
+{
+#ifdef HAS_SERIAL_1
+ /*
+ * TX RX
+ * PA9 PA10
+ * PB6 PB7
+ */
+
+ stm_rcc.ahbenr |= (1 << STM_RCC_AHBENR_GPIOAEN);
- printf ("serial initialized\n");
-#if 0
+ stm_moder_set(&stm_gpioa, 9, STM_MODER_ALTERNATE);
+ stm_moder_set(&stm_gpioa, 10, STM_MODER_ALTERNATE);
+ stm_afr_set(&stm_gpioa, 9, STM_AFR_AF7);
+ stm_afr_set(&stm_gpioa, 10, STM_AFR_AF7);
+
+ /* Enable USART */
+ stm_rcc.apb2enr |= (1 << STM_RCC_APB2ENR_USART1EN);
+
+ ao_stm_usart1.reg = &stm_usart1;
+
+ stm_nvic_set_enable(STM_ISR_USART1_POS);
+ stm_nvic_set_priority(STM_ISR_USART1_POS, 4);
#if USE_SERIAL_STDIN
ao_add_stdio(ao_serial_pollchar,
ao_serial_putchar,
#endif
#endif
- stm_nvic_set_enable(STM_ISR_USART1_POS);
- stm_nvic_set_priority(STM_ISR_USART1_POS, 4);
+#if HAS_SERIAL_2
+ /*
+ * TX RX
+ * PA2 PA3
+ * PD5 PD6
+ */
+
+ stm_rcc.ahbenr |= (1 << STM_RCC_AHBENR_GPIOAEN);
+
+ stm_moder_set(&stm_gpioa, 2, STM_MODER_ALTERNATE);
+ stm_moder_set(&stm_gpioa, 3, STM_MODER_ALTERNATE);
+ stm_afr_set(&stm_gpioa, 2, STM_AFR_AF7);
+ stm_afr_set(&stm_gpioa, 3, STM_AFR_AF7);
+
+ /* Enable USART */
+ stm_rcc.apb1enr |= (1 << STM_RCC_APB1ENR_USART2EN);
+
+ ao_stm_usart2.reg = &stm_usart2;
+
+ stm_nvic_set_enable(STM_ISR_USART2_POS);
+ stm_nvic_set_priority(STM_ISR_USART2_POS, 4);
+#endif
+
+#if HAS_SERIAL_3
+ /*
+ * TX RX
+ * PB10 PB11
+ * PC10 PC11
+ * PD8 PD9
+ */
+ stm_rcc.ahbenr |= (1 << STM_RCC_AHBENR_GPIOBEN);
+
+ stm_moder_set(&stm_gpiob, 10, STM_MODER_ALTERNATE);
+ stm_moder_set(&stm_gpiob, 11, STM_MODER_ALTERNATE);
+ stm_afr_set(&stm_gpiob, 10, STM_AFR_AF7);
+ stm_afr_set(&stm_gpiob, 11, STM_AFR_AF7);
+
+ /* Enable USART */
+ stm_rcc.apb1enr |= (1 << STM_RCC_APB1ENR_USART3EN);
+
+ ao_stm_usart3.reg = &stm_usart3;
+
+ stm_nvic_set_enable(STM_ISR_USART3_POS);
+ stm_nvic_set_priority(STM_ISR_USART3_POS, 4);
+#endif
+}
+
+#if HAS_SERIAL_1
+char
+ao_serial_getchar(void)
+{
+ return ao_usart_getchar(&ao_stm_usart1);
+}
+
+#if USE_SERIAL_STDIN
+char
+ao_serial_pollchar(void)
+{
+ return ao_usart_pollchar(&ao_stm_usart1);
+}
+#endif
+
+void
+ao_serial_putchar(char c)
+{
+ ao_usart_putchar(&ao_stm_usart1, c);
}
+#endif /* HAS_SERIAL_1 */
+
+