struct stm_i2c *stm_i2c;
};
+#define I2C_FAST 1
+
#define I2C_TIMEOUT 100
#define I2C_IDLE 0
static uint16_t ao_i2c_addr[STM_NUM_I2C];
uint8_t ao_i2c_mutex[STM_NUM_I2C];
+# define I2C_HIGH_SLOW 5000 /* ns, 100kHz clock */
+#ifdef TELEMEGA
+# define I2C_HIGH_FAST 2000 /* ns, 167kHz clock */
+#else
+# define I2C_HIGH_FAST 1000 /* ns, 333kHz clock */
+#endif
+
+# define I2C_RISE_SLOW 500 /* ns */
+# define I2C_RISE_FAST 100 /* ns */
+
+/* Clock period in ns */
+#define CYCLES(period) (((period) * (AO_PCLK1 / 1000)) / 1000000)
+
+#define max(a,b) ((a) > (b) ? (a) : (b))
+#define I2C_CCR_HIGH_SLOW max(4,CYCLES(I2C_HIGH_SLOW))
+#define I2C_CCR_HIGH_FAST max(4,CYCLES(I2C_HIGH_FAST))
+#define I2C_TRISE_SLOW (CYCLES(I2C_RISE_SLOW) + 1)
+#define I2C_TRISE_FAST (CYCLES(I2C_RISE_FAST) + 1)
+
+#if I2C_FAST
+#define I2C_TRISE I2C_TRISE_FAST
+#define I2C_CCR_HIGH I2C_CCR_HIGH_FAST
+#else
+#define I2C_TRISE I2C_TRISE_SLOW
+#define I2C_CCR_HIGH I2C_CCR_HIGH_SLOW
+#endif
+
+#if AO_PCLK1 == 2000000
+# define AO_STM_I2C_CR2_FREQ STM_I2C_CR2_FREQ_2_MHZ
+#endif
+#if AO_PCLK1 == 4000000
+# define AO_STM_I2C_CR2_FREQ STM_I2C_CR2_FREQ_4_MHZ
+#endif
+#if AO_PCLK1 == 8000000
+# define AO_STM_I2C_CR2_FREQ STM_I2C_CR2_FREQ_8_MHZ
+#endif
+#if AO_PCLK1 == 16000000
+# define AO_STM_I2C_CR2_FREQ STM_I2C_CR2_FREQ_16_MHZ
+#endif
+#if AO_PCLK1 == 32000000
+# define AO_STM_I2C_CR2_FREQ STM_I2C_CR2_FREQ_32_MHZ
+#endif
+
#define AO_STM_I2C_CR1 ((0 << STM_I2C_CR1_SWRST) | \
(0 << STM_I2C_CR1_ALERT) | \
(0 << STM_I2C_CR1_PEC) | \
(0 << STM_I2C_CR2_ITBUFEN) | \
(0 << STM_I2C_CR2_ITEVTEN) | \
(0 << STM_I2C_CR2_ITERREN) | \
- (STM_I2C_CR2_FREQ_16_MHZ << STM_I2C_CR2_FREQ))
+ (AO_STM_I2C_CR2_FREQ << STM_I2C_CR2_FREQ))
static const struct ao_i2c_stm_info ao_i2c_stm_info[STM_NUM_I2C] = {
{
stm_i2c->cr2 &= ~(1 << STM_I2C_CR2_ITEVTEN);
ao_wakeup(&ao_i2c_state[index]);
}
-#if 0
if (sr1 & (1 << STM_I2C_SR1_RXNE)) {
if (ao_i2c_recv_len[index]) {
- switch (--ao_i2c_recv_len[index]) {
- case 0:
- ao_wakeup(&ao_i2c_recv_len[index]);
- break;
- case 1:
- stm_i2c->cr1 &= ~(1 << STM_I2C_CR1_ACK);
- break;
- }
*(ao_i2c_recv_data[index]++) = stm_i2c->dr;
+ if (!--ao_i2c_recv_len[index])
+ ao_wakeup(&ao_i2c_recv_len[index]);
}
}
-#endif
}
void stm_i2c1_ev_isr(void) { ao_i2c_ev_isr(0); }
ao_mutex_put(&ao_i2c_mutex[index]);
}
-static inline uint32_t in_sr1(char *where, struct stm_i2c *stm_i2c) {
- uint32_t sr1 = stm_i2c->sr1;
- printf("%s: sr1: %x\n", where, sr1); flush();
- return sr1;
-}
-
-static inline uint32_t in_sr2(char *where, struct stm_i2c *stm_i2c) {
- uint32_t sr2 = stm_i2c->sr2;
- printf("%s: sr2: %x\n", where, sr2); flush();
- return sr2;
-}
-
-static inline void out_cr1(char *where, struct stm_i2c *stm_i2c, uint32_t cr1) {
- printf("%s: cr1: %x\n", where, cr1); flush();
- stm_i2c->cr1 = cr1;
-}
-
-static inline uint32_t in_cr1(char *where, struct stm_i2c *stm_i2c) {
- uint32_t cr1 = stm_i2c->cr1;
- printf("%s: cr1: %x\n", where, cr1); flush();
- return cr1;
-}
-
-static inline void out_cr2(char *where, struct stm_i2c *stm_i2c, uint32_t cr2) {
- printf("%s: cr2: %x\n", where, cr2); flush();
- stm_i2c->cr2 = cr2;
-}
-
-static inline uint32_t in_dr(char *where, struct stm_i2c *stm_i2c) {
- uint32_t dr = stm_i2c->dr;
- printf("%s: dr: %x\n", where, dr); flush();
- return dr;
-}
-
-static inline void out_dr(char *where, struct stm_i2c *stm_i2c, uint32_t dr) {
- printf("%s: dr: %x\n", where, dr); flush();
- stm_i2c->dr = dr;
-}
-
-uint8_t
-ao_i2c_check_status(char *where, uint8_t index, uint32_t sr1_want, uint32_t sr2_want)
-{
- struct stm_i2c *stm_i2c = ao_i2c_stm_info[index].stm_i2c;
- uint32_t sr1_got, sr2_got;
-
- if (sr1_want) {
- sr1_got = in_sr1(where, stm_i2c);
- if ((sr1_got & sr1_want) != sr1_want) {
- printf ("%s: sr1 wanted %x got %x\n", where, sr1_want, sr1_got);
- return FALSE;
- }
- }
- if (sr2_want) {
- sr2_got = in_sr2(where, stm_i2c);
- if ((sr2_got & sr2_want) != sr2_want) {
- printf ("%s: sr1 wanted %x got %x\n",
- where, sr2_want, sr2_got);
- return FALSE;
- }
- }
- printf ("%s: got sr1 %x and sr2 %x\n", where, sr1_want, sr2_want);
- return TRUE;
-}
-
-static uint8_t
-ao_i2c_check_idle(uint8_t index)
-{
- struct stm_i2c *stm_i2c = ao_i2c_stm_info[index].stm_i2c;
- uint32_t s = 0;
- int t;
-
- for (t = 0; t < I2C_TIMEOUT; t++) {
- if (!ao_i2c_check_status("check idle", index,
- 0,
- (1 << STM_I2C_SR2_BUSY)))
- {
- break;
- }
- ao_yield();
- }
- if (t == I2C_TIMEOUT)
- return FALSE;
- return TRUE;
-}
-
uint8_t
ao_i2c_start(uint8_t index, uint16_t addr)
{
struct stm_i2c *stm_i2c = ao_i2c_stm_info[index].stm_i2c;
- uint32_t sr1, sr2;
int t;
-#if 0
- if (!ao_i2c_check_idle(index)) {
- printf ("i2c busy\n");
- return FALSE;
- }
-#endif
-
ao_i2c_state[index] = I2C_IDLE;
ao_i2c_addr[index] = addr;
-#if 0
- out_cr2("start", stm_i2c, AO_STM_I2C_CR2);
- out_cr1("start", stm_i2c, AO_STM_I2C_CR1 | (1 << STM_I2C_CR1_START));
- for (t = 0; t < I2C_TIMEOUT; t++) {
- if (ao_i2c_check_status("waiting for start",
- index,
- (1 << STM_I2C_SR1_SB),
- (1 << STM_I2C_SR2_BUSY) |
- (1 << STM_I2C_SR2_MSL)))
- break;
- ao_yield();
- }
- if (t == I2C_TIMEOUT) {
- printf ("No start mode\n");
- return FALSE;
- }
- out_dr("address", stm_i2c, addr);
- if (addr & 1) {
- sr1 = (1 << STM_I2C_SR1_ADDR);
- sr2 = (1 << STM_I2C_SR2_BUSY) | (1 << STM_I2C_SR2_MSL);
- } else {
- sr1 = (1 << STM_I2C_SR1_TXE) | (1 << STM_I2C_SR1_ADDR);
- sr2 = (1 << STM_I2C_SR2_TRA) | (1 << STM_I2C_SR2_BUSY) | (1 << STM_I2C_SR2_MSL);
- }
-
+ stm_i2c->cr2 = AO_STM_I2C_CR2;
+ stm_i2c->cr1 = AO_STM_I2C_CR1 | (1 << STM_I2C_CR1_START);
for (t = 0; t < I2C_TIMEOUT; t++) {
- if (ao_i2c_check_status("waiting for addr",
- index,
- sr1, sr2))
+ if (!(stm_i2c->cr1 & (1 << STM_I2C_CR1_START)))
break;
- ao_yield();
- }
- if (t == I2C_TIMEOUT) {
- printf ("Set addr failed\n");
- return FALSE;
}
- ao_i2c_state[index] = I2C_RUNNING;
-#else
- out_cr2("start", stm_i2c, AO_STM_I2C_CR2);
- out_cr1("start", stm_i2c,
- AO_STM_I2C_CR1 | (1 << STM_I2C_CR1_START));
- out_cr2("start", stm_i2c,
- AO_STM_I2C_CR2 | (1 << STM_I2C_CR2_ITEVTEN) | (1 << STM_I2C_CR2_ITERREN));
- ao_alarm(1);
- cli();
+ ao_alarm(AO_MS_TO_TICKS(250));
+ ao_arch_block_interrupts();
+ stm_i2c->cr2 = AO_STM_I2C_CR2 | (1 << STM_I2C_CR2_ITEVTEN) | (1 << STM_I2C_CR2_ITERREN);
+ ao_i2c_ev_isr(index);
while (ao_i2c_state[index] == I2C_IDLE)
if (ao_sleep(&ao_i2c_state[index]))
break;
- sei();
+ ao_arch_release_interrupts();
ao_clear_alarm();
-#endif
return ao_i2c_state[index] == I2C_RUNNING;
}
static void
-ao_i2c_stop(uint8_t index)
+ao_i2c_wait_stop(uint8_t index)
{
struct stm_i2c *stm_i2c = ao_i2c_stm_info[index].stm_i2c;
-
- ao_i2c_state[index] = I2C_IDLE;
- out_cr2("enable isr", stm_i2c,
- AO_STM_I2C_CR2 | (1 << STM_I2C_CR2_ITEVTEN) | (1 << STM_I2C_CR2_ITERREN));
- ev_count = 0;
- out_cr1("stop", stm_i2c, AO_STM_I2C_CR1 | (1 << STM_I2C_CR1_STOP));
+ int t;
- /* XXX check to see if there is an interrupt here */
- while (in_cr1("stop", stm_i2c) & (1 << STM_I2C_CR1_STOP))
+ for (t = 0; t < I2C_TIMEOUT; t++) {
+ if (!(stm_i2c->cr1 & (1 << STM_I2C_CR1_STOP)))
+ break;
ao_yield();
- printf ("ev_count in stop: %d\n", ev_count);
+ }
+ ao_i2c_state[index] = I2C_IDLE;
+}
+
+static void
+ao_i2c_wait_addr(uint8_t index)
+{
+ struct stm_i2c *stm_i2c = ao_i2c_stm_info[index].stm_i2c;
+ int t;
+
+ for (t = 0; t < I2C_TIMEOUT; t++)
+ if (!(stm_i2c->sr1 & (1 << STM_I2C_SR1_ADDR)))
+ break;
+ if (t)
+ printf ("wait_addr %d\n", t);
}
uint8_t
ao_i2c_send(void *block, uint16_t len, uint8_t index, uint8_t stop)
{
struct stm_i2c *stm_i2c = ao_i2c_stm_info[index].stm_i2c;
- uint8_t *b = block;
- uint32_t sr1;
- int t;
-
-#if 0
- while (len--) {
- for (t = 0; t < I2C_TIMEOUT; t++) {
- if (ao_i2c_check_status("send", index,
- (1 << STM_I2C_SR1_TXE),
- 0))
- break;
- ao_yield();
- }
- if (t == I2C_TIMEOUT)
- return FALSE;
- out_dr("send", stm_i2c, *b++);
- }
-#else
uint8_t tx_dma_index = ao_i2c_stm_info[index].tx_dma_index;
/* Clear any pending ADDR bit */
- in_sr2("send clear addr", stm_i2c);
- out_cr2("send", stm_i2c, AO_STM_I2C_CR2 | (1 << STM_I2C_CR2_DMAEN));
+ (void) stm_i2c->sr2;
+ ao_i2c_wait_addr(index);
+ stm_i2c->cr2 = AO_STM_I2C_CR2 | (1 << STM_I2C_CR2_DMAEN);
ao_dma_set_transfer(tx_dma_index,
&stm_i2c->dr,
block,
ao_dma_start(tx_dma_index);
ao_alarm(1 + len);
- cli();
+ ao_arch_block_interrupts();
while (!ao_dma_done[tx_dma_index])
- if (ao_sleep(&ao_dma_done[tx_dma_index])) {
- printf ("send timeout\n");
+ if (ao_sleep(&ao_dma_done[tx_dma_index]))
break;
- }
+ ao_clear_alarm();
ao_dma_done_transfer(tx_dma_index);
- out_cr2("send enable isr", stm_i2c,
- AO_STM_I2C_CR2 | (1 << STM_I2C_CR2_ITEVTEN) | (1 << STM_I2C_CR2_ITERREN));
- while ((in_sr1("send_btf", stm_i2c) & (1 << STM_I2C_SR1_BTF)) == 0)
+ stm_i2c->cr2 = AO_STM_I2C_CR2 | (1 << STM_I2C_CR2_ITEVTEN) | (1 << STM_I2C_CR2_ITERREN);
+ while ((stm_i2c->sr1 & (1 << STM_I2C_SR1_BTF)) == 0)
if (ao_sleep(&ao_i2c_state[index]))
break;
- out_cr2("send disable isr", stm_i2c, AO_STM_I2C_CR2);
- sei();
-#endif
- if (stop)
- ao_i2c_stop(index);
+ stm_i2c->cr2 = AO_STM_I2C_CR2;
+ ao_arch_release_interrupts();
+ if (stop) {
+ stm_i2c->cr1 = AO_STM_I2C_CR1 | (1 << STM_I2C_CR1_STOP);
+ ao_i2c_wait_stop(index);
+ }
return TRUE;
}
ao_i2c_recv(void *block, uint16_t len, uint8_t index, uint8_t stop)
{
struct stm_i2c *stm_i2c = ao_i2c_stm_info[index].stm_i2c;
- uint8_t *b = block;
- int t;
+ uint8_t ret = TRUE;
- switch (len) {
- case 0:
+ if (len == 0)
return TRUE;
- case 1:
- out_cr1("setup recv 1", stm_i2c, AO_STM_I2C_CR1);
- /* Clear any pending ADDR bit */
- in_sr2("clear addr", stm_i2c);
- out_cr1("setup recv 1", stm_i2c, AO_STM_I2C_CR1 | (1 << STM_I2C_CR1_STOP));
- break;
- case 2:
- /* Clear any pending ADDR bit */
- out_cr1("setup recv 2", stm_i2c, AO_STM_I2C_CR1 | (1 << STM_I2C_CR1_POS));
- if (in_sr1("clear addr", stm_i2c) & (1 << STM_I2C_SR1_ADDR))
- in_sr2("clear addr", stm_i2c);
- out_cr1("setup recv 1", stm_i2c, AO_STM_I2C_CR1 | (1 << STM_I2C_CR1_STOP));
- break;
- default:
-// out_cr1("setup recv 2", stm_i2c, AO_STM_I2C_CR1 | (1 << STM_I2C_CR1_ACK) | (1 << STM_I2C_CR1_POS));
- out_cr1("setup recv 2", stm_i2c, AO_STM_I2C_CR1 | (1 << STM_I2C_CR1_ACK));
- /* Clear any pending ADDR bit */
- if (in_sr1("clear addr", stm_i2c) & (1 << STM_I2C_SR1_ADDR))
- in_sr2("clear addr", stm_i2c);
- break;
- }
+ if (len == 1) {
+ ao_i2c_recv_data[index] = block;
+ ao_i2c_recv_len[index] = 1;
+ stm_i2c->cr1 = AO_STM_I2C_CR1;
- while (len--) {
- for (t = 0; t < I2C_TIMEOUT; t++) {
- if (in_sr1("recv", stm_i2c) & (1 << STM_I2C_SR1_RXNE))
- break;
- ao_yield();
- }
- if (t == I2C_TIMEOUT)
- return FALSE;
- *b++ = in_dr("recv", stm_i2c);
- if (len == 2 && stop) {
- out_cr1("clear ack", stm_i2c,
-// AO_STM_I2C_CR1 | (1 << STM_I2C_CR1_STOP) | (1 << STM_I2C_CR1_POS));
- AO_STM_I2C_CR1 | (1 << STM_I2C_CR1_STOP));
- }
- }
- if (stop) {
- for (t = 0; t < I2C_TIMEOUT; t++) {
- if (!(in_cr1("recv stop", stm_i2c) & (1 << STM_I2C_CR1_STOP)))
+ /* Clear any pending ADDR bit */
+ stm_i2c->sr2;
+ ao_i2c_wait_addr(index);
+
+ /* Enable interrupts to transfer the byte */
+ stm_i2c->cr2 = (AO_STM_I2C_CR2 |
+ (1 << STM_I2C_CR2_ITEVTEN) |
+ (1 << STM_I2C_CR2_ITERREN) |
+ (1 << STM_I2C_CR2_ITBUFEN));
+ if (stop)
+ stm_i2c->cr1 = AO_STM_I2C_CR1 | (1 << STM_I2C_CR1_STOP);
+
+ ao_alarm(1);
+ ao_arch_block_interrupts();
+ while (ao_i2c_recv_len[index])
+ if (ao_sleep(&ao_i2c_recv_len[index]))
break;
- ao_yield();
- }
- if (t == I2C_TIMEOUT)
- return FALSE;
- }
-
-#if 0
- uint8_t rx_dma_index = ao_i2c_stm_info[index].rx_dma_index;
- ao_dma_set_transfer(rx_dma_index,
- &stm_i2c->dr,
- block,
- len,
- (0 << STM_DMA_CCR_MEM2MEM) |
- (STM_DMA_CCR_PL_MEDIUM << STM_DMA_CCR_PL) |
- (STM_DMA_CCR_MSIZE_8 << STM_DMA_CCR_MSIZE) |
- (STM_DMA_CCR_PSIZE_8 << STM_DMA_CCR_PSIZE) |
- (1 << STM_DMA_CCR_MINC) |
- (0 << STM_DMA_CCR_PINC) |
- (0 << STM_DMA_CCR_CIRC) |
- (STM_DMA_CCR_DIR_PER_TO_MEM << STM_DMA_CCR_DIR));
- if (len >= 2) {
- stm_i2c->cr1 = AO_STM_I2C_CR1 | (1 << STM_I2C_CR1_ACK) | (1 << STM_I2C_CR1_POS);
- stm_i2c->cr2 = AO_STM_I2C_CR2;
+ ao_arch_release_interrupts();
+ ret = ao_i2c_recv_len[index] == 0;
+ ao_clear_alarm();
} else {
- stm_i2c->cr1 = AO_STM_I2C_CR1;
- stm_i2c->cr2 = AO_STM_I2C_CR2 | (1 << STM_I2C_CR2_LAST);
+ uint8_t rx_dma_index = ao_i2c_stm_info[index].rx_dma_index;
+ ao_dma_set_transfer(rx_dma_index,
+ &stm_i2c->dr,
+ block,
+ len,
+ (0 << STM_DMA_CCR_MEM2MEM) |
+ (STM_DMA_CCR_PL_MEDIUM << STM_DMA_CCR_PL) |
+ (STM_DMA_CCR_MSIZE_8 << STM_DMA_CCR_MSIZE) |
+ (STM_DMA_CCR_PSIZE_8 << STM_DMA_CCR_PSIZE) |
+ (1 << STM_DMA_CCR_MINC) |
+ (0 << STM_DMA_CCR_PINC) |
+ (0 << STM_DMA_CCR_CIRC) |
+ (STM_DMA_CCR_DIR_PER_TO_MEM << STM_DMA_CCR_DIR));
+ stm_i2c->cr1 = AO_STM_I2C_CR1 | (1 << STM_I2C_CR1_ACK);
+ stm_i2c->cr2 = AO_STM_I2C_CR2 |
+ (1 << STM_I2C_CR2_DMAEN) | (1 << STM_I2C_CR2_LAST);
+ /* Clear any pending ADDR bit */
+ (void) stm_i2c->sr2;
+ ao_i2c_wait_addr(index);
+
+ ao_dma_start(rx_dma_index);
+ ao_alarm(len);
+ ao_arch_block_interrupts();
+ while (!ao_dma_done[rx_dma_index])
+ if (ao_sleep(&ao_dma_done[rx_dma_index]))
+ break;
+ ao_arch_release_interrupts();
+ ao_clear_alarm();
+ ret = ao_dma_done[rx_dma_index];
+ ao_dma_done_transfer(rx_dma_index);
+ stm_i2c->cr1 = AO_STM_I2C_CR1 | (1 << STM_I2C_CR1_STOP);
}
-
- ao_dma_start(rx_dma_index);
- cli();
- while (!ao_dma_done[rx_dma_index])
- ao_sleep(&ao_dma_done[rx_dma_index]);
- sei();
- ao_dma_done_transfer(rx_dma_index);
-#endif
+ if (stop)
+ ao_i2c_wait_stop(index);
+ return ret;
}
void
ao_i2c_channel_init(uint8_t index)
{
struct stm_i2c *stm_i2c = ao_i2c_stm_info[index].stm_i2c;
+ int i;
/* Turn I2C off while configuring */
+ stm_i2c->cr1 = (1 << STM_I2C_CR1_SWRST);
+ for (i = 0; i < 100; i++)
+ asm("nop");
stm_i2c->cr1 = 0;
stm_i2c->cr2 = AO_STM_I2C_CR2;
stm_i2c->sr1 = 0;
stm_i2c->sr2 = 0;
- stm_i2c->ccr = ((1 << STM_I2C_CCR_FS) |
+ stm_i2c->ccr = ((I2C_FAST << STM_I2C_CCR_FS) |
(0 << STM_I2C_CCR_DUTY) |
- (20 << STM_I2C_CCR_CCR));
-
+ (I2C_CCR_HIGH << STM_I2C_CCR_CCR));
+
+ stm_i2c->trise = I2C_TRISE;
stm_i2c->cr1 = AO_STM_I2C_CR1;
}
+static inline void
+i2c_pin_set(struct stm_gpio *gpio, int pin)
+{
+ stm_afr_set(gpio, pin, STM_AFR_AF4);
+ stm_ospeedr_set(gpio, pin, STM_OSPEEDR_400kHz);
+ stm_pupdr_set(gpio, pin, STM_PUPDR_PULL_UP);
+}
+
void
ao_i2c_init(void)
{
stm_rcc.ahbenr |= (1 << STM_RCC_AHBENR_GPIOBEN);
#if HAS_I2C_1
# if I2C_1_PB6_PB7
- stm_afr_set(&stm_gpiob, 6, STM_AFR_AF4);
- stm_afr_set(&stm_gpiob, 7, STM_AFR_AF4);
+ i2c_pin_set(&stm_gpiob, 6);
+ i2c_pin_set(&stm_gpiob, 7);
# else
# if I2C_1_PB8_PB9
- stm_afr_set(&stm_gpiob, 8, STM_AFR_AF4);
- stm_afr_set(&stm_gpiob, 9, STM_AFR_AF4);
+ i2c_pin_set(&stm_gpiob, 8);
+ i2c_pin_set(&stm_gpiob, 9);
# else
# error "No I2C_1 port configuration specified"
# endif
ao_i2c_channel_init(0);
stm_nvic_set_enable(STM_ISR_I2C1_EV_POS);
- stm_nvic_set_priority(STM_ISR_I2C1_EV_POS, 3);
+ stm_nvic_set_priority(STM_ISR_I2C1_EV_POS, AO_STM_NVIC_MED_PRIORITY);
stm_nvic_set_enable(STM_ISR_I2C1_ER_POS);
- stm_nvic_set_priority(STM_ISR_I2C1_ER_POS, 3);
+ stm_nvic_set_priority(STM_ISR_I2C1_ER_POS, AO_STM_NVIC_MED_PRIORITY);
#endif
#if HAS_I2C_2
# if I2C_2_PB10_PB11
- stm_afr_set(&stm_gpiob, 10, STM_AFR_AF4);
- stm_afr_set(&stm_gpiob, 11, STM_AFR_AF4);
+ i2c_pin_set(&stm_gpiob, 10);
+ i2c_pin_set(&stm_gpiob, 11);
# else
# error "No I2C_2 port configuration specified"
# endif
ao_i2c_channel_init(1);
stm_nvic_set_enable(STM_ISR_I2C2_EV_POS);
- stm_nvic_set_priority(STM_ISR_I2C2_EV_POS, 3);
+ stm_nvic_set_priority(STM_ISR_I2C2_EV_POS, AO_STM_NVIC_MED_PRIORITY);
stm_nvic_set_enable(STM_ISR_I2C2_ER_POS);
- stm_nvic_set_priority(STM_ISR_I2C2_ER_POS, 3);
+ stm_nvic_set_priority(STM_ISR_I2C2_ER_POS, AO_STM_NVIC_MED_PRIORITY);
#endif
}
-