The stlink related constants kindly provided by Oliver Spencer (OpenOCD)
for use in a GPL compatible license.
- Code format ~ TAB = 8, K&R, linux kernel source, golang oriented
Tested compatibility: linux, gcc >= 4.3.3
The communication is based on standard USB mass storage device
CBW - Command Block Wrapper
CSW - Command Status Wrapper
RFU - Reserved for Future Use
- scsi_pt - SCSI pass-through
- sg - SCSI generic
- * usb-storage.quirks
+ Originally, this driver used scsi pass through commands, which required the
+ usb-storage module to be loaded, providing the /dev/sgX links. The USB mass
+ storage implementation on the STLinkv1 is however terribly broken, and it can
+ take many minutes for the kernel to give up.
+
+ However, in Nov 2011, the scsi pass through was replaced by raw libusb, so
+ instead of having to let usb-storage struggle with the device, and also greatly
+ limiting the portability of the driver, you can now tell usb-storage to simply
+ ignore this device completely.
+
+ usb-storage.quirks
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=blob_plain;f=Documentation/kernel-parameters.txt
Each entry has the form VID:PID:Flags where VID and PID are Vendor and Product
ID values (4-digit hex numbers) and Flags is a set of characters, each corresponding
Example: quirks=0419:aaf5:rl,0421:0433:rc
http://permalink.gmane.org/gmane.linux.usb.general/35053
+
+ For the stlinkv1, you just want the following
- modprobe -r usb-storage && modprobe usb-storage quirks=483:3744:l
+ modprobe -r usb-storage && modprobe usb-storage quirks=483:3744:i
Equivalently, you can add a line saying
- options usb-storage quirks=483:3744:l
+ options usb-storage quirks=483:3744:i
to your /etc/modprobe.conf or /etc/modprobe.d/local.conf (or add the "quirks=..."
part to an existing options line for usb-storage).
-
- https://wiki.kubuntu.org/Kernel/Debugging/USB explains the protocoll and
- would allow to replace the sg access to pure libusb access
*/
#define __USE_GNU
+#include <assert.h>
#include <stdio.h>
#include <string.h>
#include <stdarg.h>
#define WLOG(format, args...) ugly_log(UWARN, LOG_TAG, format, ## args)
#define fatal(format, args...) ugly_log(UFATAL, LOG_TAG, format, ## args)
-// Suspends execution of the calling process for
-// (at least) ms milliseconds.
-
-static void delay(int ms) {
- //fprintf(stderr, "*** wait %d ms\n", ms);
- usleep(1000 * ms);
-}
-
static void clear_cdb(struct stlink_libsg *sl) {
for (size_t i = 0; i < sizeof (sl->cdb_cmd_blk); i++)
sl->cdb_cmd_blk[i] = 0;
sl->q_data_dir = Q_DATA_IN;
}
-// E.g. make the valgrind happy.
-
-static void clear_buf(stlink_t *sl) {
- DLOG("*** clear_buf ***\n");
- for (size_t i = 0; i < sizeof (sl->q_buf); i++)
- sl->q_buf[i] = 0;
-
-}
-
-// close the device, free the allocated memory
-
-void _stlink_sg_close(stlink_t *sl) {
+/**
+ * Close and free any _backend_ related information...
+ * @param sl
+ */void _stlink_sg_close(stlink_t *sl) {
if (sl) {
-#if FINISHED_WITH_SG
struct stlink_libsg *slsg = sl->backend_data;
- scsi_pt_close_device(slsg->sg_fd);
+ libusb_close(slsg->usb_handle);
+ libusb_exit(slsg->libusb_ctx);
free(slsg);
-#endif
}
}
+static int get_usb_mass_storage_status(libusb_device_handle *handle, uint8_t endpoint, uint32_t *tag)
+{
+ unsigned char csw[13];
+ memset(csw, 0, sizeof(csw));
+ int transferred;
+ int ret;
+ int try = 0;
+ do {
+ ret = libusb_bulk_transfer(handle, endpoint, (unsigned char *)&csw, sizeof(csw),
+ &transferred, SG_TIMEOUT_MSEC);
+ if (ret == LIBUSB_ERROR_PIPE) {
+ libusb_clear_halt(handle, endpoint);
+ }
+ try++;
+ } while ((ret == LIBUSB_ERROR_PIPE) && (try < 3));
+ if (ret != LIBUSB_SUCCESS) {
+ WLOG("%s: receiving failed: %d\n", __func__, ret);
+ return -1;
+ }
+ if (transferred != sizeof(csw)) {
+ WLOG("%s: received unexpected amount: %d\n", __func__, transferred);
+ return -1;
+ }
-//TODO rewrite/cleanup, save the error in sl
+ uint32_t rsig = read_uint32(csw, 0);
+ uint32_t rtag = read_uint32(csw, 4);
+ /* uint32_t residue = read_uint32(csw, 8); */
+#define USB_CSW_SIGNATURE 0x53425355 // 'U' 'S' 'B' 'S' (reversed)
+ if (rsig != USB_CSW_SIGNATURE) {
+ WLOG("status signature was invalid: %#x\n", rsig);
+ return -1;
+ }
+ *tag = rtag;
+ uint8_t rstatus = csw[12];
+ return rstatus;
+}
-#if FINISHED_WITH_SG
-static void stlink_confirm_inq(stlink_t *stl, struct sg_pt_base *ptvp) {
- struct stlink_libsg *sl = stl->backend_data;
- const int e = sl->do_scsi_pt_err;
- if (e < 0) {
- fprintf(stderr, "scsi_pt error: pass through os error: %s\n",
- safe_strerror(-e));
- return;
- } else if (e == SCSI_PT_DO_BAD_PARAMS) {
- fprintf(stderr, "scsi_pt error: bad pass through setup\n");
- return;
- } else if (e == SCSI_PT_DO_TIMEOUT) {
- fprintf(stderr, " pass through timeout\n");
- return;
+static int dump_CDB_command(uint8_t *cdb, uint8_t cdb_len) {
+ char dbugblah[100];
+ char *dbugp = dbugblah;
+ dbugp += sprintf(dbugp, "Sending CDB [");
+ for (uint8_t i = 0; i < cdb_len; i++) {
+ dbugp += sprintf(dbugp, " %#02x", (unsigned int) cdb[i]);
}
- const int duration = get_scsi_pt_duration_ms(ptvp);
- if ((stl->verbose > 1) && (duration >= 0))
- DLOG(" duration=%d ms\n", duration);
+ sprintf(dbugp, "]\n");
+ DLOG(dbugblah);
+ return 0;
+}
- // XXX stlink fw sends broken residue, so ignore it and use the known q_len
- // "usb-storage quirks=483:3744:r"
- // forces residue to be ignored and calculated, but this causes aboard if
- // data_len = 0 and by some other data_len values.
+/**
+ * Wraps a CDB mass storage command in the appropriate gunk to get it down
+ * @param handle
+ * @param endpoint
+ * @param cdb
+ * @param cdb_length
+ * @param lun
+ * @param flags
+ * @param expected_rx_size
+ * @return
+ */
+int send_usb_mass_storage_command(libusb_device_handle *handle, uint8_t endpoint_out,
+ uint8_t *cdb, uint8_t cdb_length,
+ uint8_t lun, uint8_t flags, uint32_t expected_rx_size) {
+ DLOG("Sending usb m-s cmd: cdblen:%d, rxsize=%d\n", cdb_length, expected_rx_size);
+ dump_CDB_command(cdb, cdb_length);
+
+ static uint32_t tag;
+ if (tag == 0) {
+ tag = 1;
+ }
- const int resid = get_scsi_pt_resid(ptvp);
- const int dsize = stl->q_len - resid;
+ int try = 0;
+ int ret = 0;
+ int real_transferred;
+ int i = 0;
+
+ uint8_t c_buf[STLINK_SG_SIZE];
+ // tag is allegedly ignored... TODO - verify
+ c_buf[i++] = 'U';
+ c_buf[i++] = 'S';
+ c_buf[i++] = 'B';
+ c_buf[i++] = 'C';
+ write_uint32(&c_buf[i], tag);
+ uint32_t this_tag = tag++;
+ write_uint32(&c_buf[i+4], expected_rx_size);
+ i+= 8;
+ c_buf[i++] = flags;
+ c_buf[i++] = lun;
+
+ c_buf[i++] = cdb_length;
+
+ // Now the actual CDB request
+ assert(cdb_length <= CDB_SL);
+ memcpy(&(c_buf[i]), cdb, cdb_length);
+
+ int sending_length = STLINK_SG_SIZE;
+
+ // send....
+ do {
+ ret = libusb_bulk_transfer(handle, endpoint_out, c_buf, sending_length,
+ &real_transferred, SG_TIMEOUT_MSEC);
+ if (ret == LIBUSB_ERROR_PIPE) {
+ libusb_clear_halt(handle, endpoint_out);
+ }
+ try++;
+ } while ((ret == LIBUSB_ERROR_PIPE) && (try < 3));
+ if (ret != LIBUSB_SUCCESS) {
+ WLOG("sending failed: %d\n", ret);
+ return -1;
+ }
+ return this_tag;
+}
- const int cat = get_scsi_pt_result_category(ptvp);
- char buf[512];
- unsigned int slen;
- switch (cat) {
- case SCSI_PT_RESULT_GOOD:
- if (stl->verbose && (resid > 0))
- DLOG(" notice: requested %d bytes but "
- "got %d bytes, ignore [broken] residue = %d\n",
- stl->q_len, dsize, resid);
- break;
- case SCSI_PT_RESULT_STATUS:
- if (stl->verbose) {
- sg_get_scsi_status_str(
- get_scsi_pt_status_response(ptvp), sizeof (buf),
- buf);
- DLOG(" scsi status: %s\n", buf);
- }
- return;
- case SCSI_PT_RESULT_SENSE:
- slen = get_scsi_pt_sense_len(ptvp);
- if (stl->verbose) {
- sg_get_sense_str("", sl->sense_buf, slen, (stl->verbose
- > 1), sizeof (buf), buf);
- DLOG("%s", buf);
- }
- if (stl->verbose && (resid > 0)) {
- if ((stl->verbose) || (stl->q_len > 0))
- DLOG(" requested %d bytes but "
- "got %d bytes\n", stl->q_len, dsize);
- }
- return;
- case SCSI_PT_RESULT_TRANSPORT_ERR:
- if (stl->verbose) {
- get_scsi_pt_transport_err_str(ptvp, sizeof (buf), buf);
- // http://tldp.org/HOWTO/SCSI-Generic-HOWTO/x291.html
- // These codes potentially come from the firmware on a host adapter
- // or from one of several hosts that an adapter driver controls.
- // The 'host_status' field has the following values:
- // [0x07] Internal error detected in the host adapter.
- // This may not be fatal (and the command may have succeeded).
- DLOG(" transport: %s", buf);
- }
- return;
- case SCSI_PT_RESULT_OS_ERR:
- if (stl->verbose) {
- get_scsi_pt_os_err_str(ptvp, sizeof (buf), buf);
- DLOG(" os: %s", buf);
- }
- return;
- default:
- fprintf(stderr, " unknown pass through result "
- "category (%d)\n", cat);
+/**
+ * Straight from stm8 stlink code...
+ * @param handle
+ * @param endpoint_in
+ * @param endpoint_out
+ */
+static void
+get_sense(libusb_device_handle *handle, uint8_t endpoint_in, uint8_t endpoint_out)
+{
+ DLOG("Fetching sense...\n");
+ uint8_t cdb[16];
+ memset(cdb, 0, sizeof(cdb));
+#define REQUEST_SENSE 0x03
+#define REQUEST_SENSE_LENGTH 18
+ cdb[0] = REQUEST_SENSE;
+ cdb[4] = REQUEST_SENSE_LENGTH;
+ uint32_t tag = send_usb_mass_storage_command(handle, endpoint_out, cdb, sizeof(cdb), 0,
+ LIBUSB_ENDPOINT_IN, REQUEST_SENSE_LENGTH);
+ if (tag == 0) {
+ WLOG("refusing to send request sense with tag 0\n");
+ return;
+ }
+ unsigned char sense[REQUEST_SENSE_LENGTH];
+ int transferred;
+ int ret;
+ int try = 0;
+ do {
+ ret = libusb_bulk_transfer(handle, endpoint_in, sense, sizeof(sense),
+ &transferred, SG_TIMEOUT_MSEC);
+ if (ret == LIBUSB_ERROR_PIPE) {
+ libusb_clear_halt(handle, endpoint_in);
+ }
+ try++;
+ } while ((ret == LIBUSB_ERROR_PIPE) && (try < 3));
+ if (ret != LIBUSB_SUCCESS) {
+ WLOG("receiving sense failed: %d\n", ret);
+ return;
+ }
+ if (transferred != sizeof(sense)) {
+ WLOG("received unexpected amount of sense: %d != %d\n", transferred, sizeof(sense));
+ }
+ uint32_t received_tag;
+ int status = get_usb_mass_storage_status(handle, endpoint_in, &received_tag);
+ if (status != 0) {
+ WLOG("receiving sense failed with status: %02x\n", status);
+ return;
+ }
+ if (sense[0] != 0x70 && sense[0] != 0x71) {
+ WLOG("No sense data\n");
+ } else {
+ WLOG("Sense KCQ: %02X %02X %02X\n", sense[2] & 0x0f, sense[12], sense[13]);
}
}
-#endif
-void stlink_q(stlink_t *sl) {
-#if FINISHED_WITH_SG
- struct stlink_libsg* sg = sl->backend_data;
- DLOG("CDB[");
- for (int i = 0; i < CDB_SL; i++)
- DLOG(" 0x%02x", (unsigned int) sg->cdb_cmd_blk[i]);
- DLOG("]\n");
-
- // Get control command descriptor of scsi structure,
- // (one object per command!!)
- struct sg_pt_base *ptvp = construct_scsi_pt_obj();
- if (NULL == ptvp) {
- fprintf(stderr, "construct_scsi_pt_obj: out of memory\n");
- return;
+/**
+ * Just send a buffer on an endpoint, no questions asked.
+ * Handles repeats, and time outs. Also handles reading status reports and sense
+ * @param handle libusb device *
+ * @param endpoint_out sends
+ * @param endpoint_in used to read status reports back in
+ * @param cbuf what to send
+ * @param length how much to send
+ * @return number of bytes actually sent, or -1 for failures.
+ */
+int send_usb_data_only(libusb_device_handle *handle, unsigned char endpoint_out,
+ unsigned char endpoint_in, unsigned char *cbuf, unsigned int length) {
+ int ret;
+ int real_transferred;
+ int try = 0;
+ do {
+ ret = libusb_bulk_transfer(handle, endpoint_out, cbuf, length,
+ &real_transferred, SG_TIMEOUT_MSEC);
+ if (ret == LIBUSB_ERROR_PIPE) {
+ libusb_clear_halt(handle, endpoint_out);
+ }
+ try++;
+ } while ((ret == LIBUSB_ERROR_PIPE) && (try < 3));
+ if (ret != LIBUSB_SUCCESS) {
+ WLOG("sending failed: %d\n", ret);
+ return -1;
+ }
+
+ // now, swallow up the status, so that things behave nicely...
+ uint32_t received_tag;
+ // -ve is for my errors, 0 is good, +ve is libusb sense status bytes
+ int status = get_usb_mass_storage_status(handle, endpoint_in, &received_tag);
+ if (status < 0) {
+ WLOG("receiving status failed: %d\n", status);
+ return -1;
+ }
+ if (status != 0) {
+ WLOG("receiving status not passed :(: %02x\n", status);
+ }
+ if (status == 1) {
+ get_sense(handle, endpoint_in, endpoint_out);
+ return -1;
}
+
+ return real_transferred;
+}
- set_scsi_pt_cdb(ptvp, sg->cdb_cmd_blk, sizeof (sg->cdb_cmd_blk));
- // set buffer for sense (error information) data
- set_scsi_pt_sense(ptvp, sg->sense_buf, sizeof (sg->sense_buf));
+int stlink_q(stlink_t *sl) {
+ struct stlink_libsg* sg = sl->backend_data;
+ //uint8_t cdb_len = 6; // FIXME varies!!!
+ uint8_t cdb_len = 10; // FIXME varies!!!
+ uint8_t lun = 0; // always zero...
+ uint32_t tag = send_usb_mass_storage_command(sg->usb_handle, sg->ep_req,
+ sg->cdb_cmd_blk, cdb_len, lun, LIBUSB_ENDPOINT_IN, sl->q_len);
+
+
+ // now wait for our response...
+ // length copied from stlink-usb...
+ int rx_length = sl->q_len;
+ int try = 0;
+ int real_transferred;
+ int ret;
+ if (rx_length > 0) {
+ do {
+ ret = libusb_bulk_transfer(sg->usb_handle, sg->ep_rep, sl->q_buf, rx_length,
+ &real_transferred, SG_TIMEOUT_MSEC);
+ if (ret == LIBUSB_ERROR_PIPE) {
+ libusb_clear_halt(sg->usb_handle, sg->ep_req);
+ }
+ try++;
+ } while ((ret == LIBUSB_ERROR_PIPE) && (try < 3));
- // Set a buffer to be used for data transferred from device
- if (sg->q_data_dir == Q_DATA_IN) {
- //clear_buf(sl);
- set_scsi_pt_data_in(ptvp, sl->q_buf, sl->q_len);
- } else {
- set_scsi_pt_data_out(ptvp, sl->q_buf, sl->q_len);
+ if (ret != LIBUSB_SUCCESS) {
+ WLOG("Receiving failed: %d\n", ret);
+ return -1;
+ }
+
+ if (real_transferred != rx_length) {
+ WLOG("received unexpected amount: %d != %d\n", real_transferred, rx_length);
+ }
}
- // Executes SCSI command (or at least forwards it to lower layers).
- sg->do_scsi_pt_err = do_scsi_pt(ptvp, sg->sg_fd, SG_TIMEOUT_SEC,
- sl->verbose);
- // check for scsi errors
- stlink_confirm_inq(sl, ptvp);
- // TODO recycle: clear_scsi_pt_obj(struct sg_pt_base * objp);
- destruct_scsi_pt_obj(ptvp);
-#endif
+ uint32_t received_tag;
+ // -ve is for my errors, 0 is good, +ve is libusb sense status bytes
+ int status = get_usb_mass_storage_status(sg->usb_handle, sg->ep_rep, &received_tag);
+ if (status < 0) {
+ WLOG("receiving status failed: %d\n", status);
+ return -1;
+ }
+ if (status != 0) {
+ WLOG("receiving status not passed :(: %02x\n", status);
+ }
+ if (status == 1) {
+ get_sense(sg->usb_handle, sg->ep_rep, sg->ep_req);
+ return -1;
+ }
+ if (received_tag != tag) {
+ WLOG("received tag %d but expected %d\n", received_tag, tag);
+ //return -1;
+ }
+ if (rx_length > 0 && real_transferred != rx_length) {
+ return -1;
+ }
+ return 0;
}
// TODO thinking, cleanup
void _stlink_sg_version(stlink_t *stl) {
struct stlink_libsg *sl = stl->backend_data;
- DLOG("\n*** stlink_version ***\n");
clear_cdb(sl);
sl->cdb_cmd_blk[0] = STLINK_GET_VERSION;
stl->q_len = 6;
}
// XXX kernel driver performs reset, the device temporally disappears
-
+// Suspect this is no longer the case when we have ignore on? RECHECK
void _stlink_sg_exit_dfu_mode(stlink_t *sl) {
struct stlink_libsg *sg = sl->backend_data;
DLOG("\n*** stlink_exit_dfu_mode ***\n");
stlink_stat(sl, "core reset");
}
+// Arm-core reset -> halted state.
+
+void _stlink_sg_jtag_reset(stlink_t *sl, int value) {
+ struct stlink_libsg *sg = sl->backend_data;
+ clear_cdb(sg);
+ sg->cdb_cmd_blk[1] = STLINK_JTAG_DRIVE_NRST;
+ sg->cdb_cmd_blk[2] = (value)?0:1;
+ sl->q_len = 3;
+ sg->q_addr = 2;
+ stlink_q(sl);
+ stlink_stat(sl, "core reset");
+}
+
// Arm-core status: halted or running.
void _stlink_sg_status(stlink_t *sl) {
struct stlink_libsg *sg = sl->backend_data;
- DLOG("\n*** stlink_status ***\n");
clear_cdb(sg);
sg->cdb_cmd_blk[1] = STLINK_DEBUG_GETSTATUS;
sl->q_len = 2;
void _stlink_sg_force_debug(stlink_t *sl) {
struct stlink_libsg *sg = sl->backend_data;
- DLOG("\n*** stlink_force_debug ***\n");
clear_cdb(sg);
sg->cdb_cmd_blk[1] = STLINK_DEBUG_FORCEDEBUG;
sl->q_len = 2;
void _stlink_sg_read_all_regs(stlink_t *sl, reg *regp) {
struct stlink_libsg *sg = sl->backend_data;
- /* unused */
- regp = regp;
-
clear_cdb(sg);
sg->cdb_cmd_blk[1] = STLINK_DEBUG_READALLREGS;
sl->q_len = 84;
// 0-3 | 4-7 | ... | 60-63 | 64-67 | 68-71 | 72-75 | 76-79 | 80-83
// r0 | r1 | ... | r15 | xpsr | main_sp | process_sp | rw | rw2
for (int i = 0; i < 16; i++) {
- sg->reg.r[i] = read_uint32(sl->q_buf, 4 * i);
+ regp->r[i] = read_uint32(sl->q_buf, 4 * i);
if (sl->verbose > 1)
- DLOG("r%2d = 0x%08x\n", i, sg->reg.r[i]);
+ DLOG("r%2d = 0x%08x\n", i, regp->r[i]);
}
- sg->reg.xpsr = read_uint32(sl->q_buf, 64);
- sg->reg.main_sp = read_uint32(sl->q_buf, 68);
- sg->reg.process_sp = read_uint32(sl->q_buf, 72);
- sg->reg.rw = read_uint32(sl->q_buf, 76);
- sg->reg.rw2 = read_uint32(sl->q_buf, 80);
+ regp->xpsr = read_uint32(sl->q_buf, 64);
+ regp->main_sp = read_uint32(sl->q_buf, 68);
+ regp->process_sp = read_uint32(sl->q_buf, 72);
+ regp->rw = read_uint32(sl->q_buf, 76);
+ regp->rw2 = read_uint32(sl->q_buf, 80);
if (sl->verbose < 2)
return;
- DLOG("xpsr = 0x%08x\n", sg->reg.xpsr);
- DLOG("main_sp = 0x%08x\n", sg->reg.main_sp);
- DLOG("process_sp = 0x%08x\n", sg->reg.process_sp);
- DLOG("rw = 0x%08x\n", sg->reg.rw);
- DLOG("rw2 = 0x%08x\n", sg->reg.rw2);
+ DLOG("xpsr = 0x%08x\n", regp->xpsr);
+ DLOG("main_sp = 0x%08x\n", regp->main_sp);
+ DLOG("process_sp = 0x%08x\n", regp->process_sp);
+ DLOG("rw = 0x%08x\n", regp->rw);
+ DLOG("rw2 = 0x%08x\n", regp->rw2);
}
// Read an arm-core register, the index must be in the range 0..20.
void _stlink_sg_run(stlink_t *sl) {
struct stlink_libsg *sg = sl->backend_data;
- DLOG("\n*** stlink_run ***\n");
clear_cdb(sg);
sg->cdb_cmd_blk[1] = STLINK_DEBUG_RUNCORE;
sl->q_len = 2;
write_uint32(sg->cdb_cmd_blk + 2, addr);
write_uint16(sg->cdb_cmd_blk + 6, len);
- // data_out 0-len
- sl->q_len = len;
- sg->q_addr = addr;
- sg->q_data_dir = Q_DATA_OUT;
- stlink_q(sl);
+ // this sends the command...
+ send_usb_mass_storage_command(sg->usb_handle, sg->ep_req, sg->cdb_cmd_blk, CDB_SL, 0, 0, 0);
+ // This sends the data...
+ send_usb_data_only(sg->usb_handle, sg->ep_req, sg->ep_rep, sl->q_buf, len);
stlink_print_data(sl);
}
write_uint32(sg->cdb_cmd_blk + 2, addr);
write_uint16(sg->cdb_cmd_blk + 6, len);
- // data_out 0-0x40-...-len
- sl->q_len = len;
- sg->q_addr = addr;
- sg->q_data_dir = Q_DATA_OUT;
- stlink_q(sl);
+ // this sends the command...
+ send_usb_mass_storage_command(sg->usb_handle, sg->ep_req, sg->cdb_cmd_blk, CDB_SL, 0, 0, 0);
+ // This sends the data...
+ send_usb_data_only(sg->usb_handle, sg->ep_req, sg->ep_rep, sl->q_buf, len);
+
stlink_print_data(sl);
}
-#if 0 /* not working */
-
-static int write_flash_mem16
-(struct stlink* sl, uint32_t addr, uint16_t val) {
- /* half word writes */
- if (addr % 2) return -1;
+// Write one DWORD data to memory
- /* unlock if locked */
- unlock_flash_if(sl);
-
- /* set flash programming chosen bit */
- set_flash_cr_pg(sl);
-
- write_uint16(sl->q_buf, val);
- stlink_write_mem16(sl, addr, 2);
+void _stlink_sg_write_debug32(stlink_t *sl, uint32_t addr, uint32_t data) {
+ struct stlink_libsg *sg = sl->backend_data;
+ clear_cdb(sg);
+ sg->cdb_cmd_blk[1] = STLINK_JTAG_WRITEDEBUG_32BIT;
+ // 2-5: addr
+ write_uint32(sg->cdb_cmd_blk + 2, addr);
+ write_uint32(sg->cdb_cmd_blk + 6, data);
+ sl->q_len = 2;
+ stlink_q(sl);
- /* wait for non business */
- wait_flash_busy(sl);
+}
- lock_flash(sl);
+// Read one DWORD data from memory
- /* check the programmed value back */
- stlink_read_mem16(sl, addr, 2);
- if (*(const uint16_t*) sl->q_buf != val) {
- /* values differ at i * sizeof(uint16_t) */
- return -1;
- }
+uint32_t _stlink_sg_read_debug32(stlink_t *sl, uint32_t addr) {
+ struct stlink_libsg *sg = sl->backend_data;
+ clear_cdb(sg);
+ sg->cdb_cmd_blk[1] = STLINK_JTAG_READDEBUG_32BIT;
+ // 2-5: addr
+ write_uint32(sg->cdb_cmd_blk + 2, addr);
+ sl->q_len = 8;
+ stlink_q(sl);
- /* success */
- return 0;
+ return read_uint32(sl->q_buf, 4);
}
-#endif /* not working */
// Exit the jtag or swd mode and enter the mass mode.
_stlink_sg_exit_dfu_mode,
_stlink_sg_core_id,
_stlink_sg_reset,
+ _stlink_sg_jtag_reset,
_stlink_sg_run,
_stlink_sg_status,
_stlink_sg_version,
+ _stlink_sg_read_debug32,
_stlink_sg_read_mem32,
+ _stlink_sg_write_debug32,
_stlink_sg_write_mem32,
_stlink_sg_write_mem8,
_stlink_sg_read_all_regs,
_stlink_sg_force_debug
};
-#if using_stm8_stuff_XXXX
-stlink *stlink_open(libusb_context *usb_context)
-{
- stlink *stl = malloc(sizeof(stlink));
- stl->handle = libusb_open_device_with_vid_pid(usb_context, USB_VID_ST, USB_PID_STLINK);
- if (stl->handle == NULL) {
- free(stl);
- return NULL;
- }
-
- libusb_device *dev = libusb_get_device(stl->handle);
- struct libusb_config_descriptor *conf_desc;
- int ret = libusb_get_config_descriptor(dev, 0, &conf_desc);
- if (ret != LIBUSB_SUCCESS) {
- libusb_close(stl->handle);
- free(stl);
- return NULL;
- }
- for (int i = 0; i < conf_desc->bNumInterfaces; i++) {
- printf("interface %d\n", i);
- for (int j = 0; j < conf_desc->interface[i].num_altsetting; j++) {
- for (int k = 0; k < conf_desc->interface[i].altsetting[j].bNumEndpoints; k++) {
- const struct libusb_endpoint_descriptor *endpoint;
- endpoint = &conf_desc->interface[i].altsetting[j].endpoint[k];
- if (endpoint->bEndpointAddress & LIBUSB_ENDPOINT_IN) {
- stl->endpoint_in = endpoint->bEndpointAddress;
- printf("Found IN endpoint\n");
- } else {
- stl->endpoint_out = endpoint->bEndpointAddress;
- printf("Found OUT endpoint\n");
- }
- }
- }
- }
- libusb_free_config_descriptor(conf_desc);
-
- ret = libusb_kernel_driver_active(stl->handle, 0);
- if (ret == 1) {
- printf("kernel driver active\n");
- } else if (ret == 0) {
- //printf("kernel driver not active\n");
- } else {
- fprintf(stderr, "libusb_kernel_driver_active = %d\n", ret);
- }
- ret = libusb_claim_interface(stl->handle, 0);
- if (ret != LIBUSB_SUCCESS) {
- fprintf(stderr, "claiming interface failed: %d\n", ret);
- libusb_close(stl->handle);
- free(stl);
- return NULL;
- }
-
- return stl;
-}
-#endif
-
-
-static stlink_t* stlink_open(const char *dev_name, const int verbose) {
- fprintf(stderr, "\n*** stlink_open [%s] ***\n", dev_name);
+static stlink_t* stlink_open(const int verbose) {
stlink_t *sl = malloc(sizeof (stlink_t));
+ memset(sl, 0, sizeof(stlink_t));
struct stlink_libsg *slsg = malloc(sizeof (struct stlink_libsg));
if (sl == NULL || slsg == NULL) {
WLOG("Couldn't malloc stlink and stlink_sg structures out of memory!\n");
return NULL;
}
- slsg->handle = libusb_open_device_with_vid_pid(slsg->libusb_ctx, USB_ST_VID, USB_STLINK_PID);
- if (slsg->handle == NULL) {
+ libusb_set_debug(slsg->libusb_ctx, 3);
+
+ slsg->usb_handle = libusb_open_device_with_vid_pid(slsg->libusb_ctx, USB_ST_VID, USB_STLINK_PID);
+ if (slsg->usb_handle == NULL) {
WLOG("Failed to find an stlink v1 by VID:PID\n");
+ libusb_close(slsg->usb_handle);
+ libusb_exit(slsg->libusb_ctx);
free(sl);
free(slsg);
return NULL;
}
+ // TODO
+ // Could read the interface config descriptor, and assert lots of the assumptions
+
+ // assumption: numInterfaces is always 1...
+ if (libusb_kernel_driver_active(slsg->usb_handle, 0) == 1) {
+ int r = libusb_detach_kernel_driver(slsg->usb_handle, 0);
+ if (r < 0) {
+ WLOG("libusb_detach_kernel_driver(() error %s\n", strerror(-r));
+ libusb_close(slsg->usb_handle);
+ libusb_exit(slsg->libusb_ctx);
+ free(sl);
+ free(slsg);
+ return NULL;
+ }
+ DLOG("Kernel driver was successfully detached\n");
+ }
+
+ int config;
+ if (libusb_get_configuration(slsg->usb_handle, &config)) {
+ /* this may fail for a previous configured device */
+ WLOG("libusb_get_configuration()\n");
+ libusb_close(slsg->usb_handle);
+ libusb_exit(slsg->libusb_ctx);
+ free(sl);
+ free(slsg);
+ return NULL;
+
+ }
+
+ // assumption: bConfigurationValue is always 1
+ if (config != 1) {
+ WLOG("Your stlink got into a real weird configuration, trying to fix it!\n");
+ DLOG("setting new configuration (%d -> 1)\n", config);
+ if (libusb_set_configuration(slsg->usb_handle, 1)) {
+ /* this may fail for a previous configured device */
+ WLOG("libusb_set_configuration() failed\n");
+ libusb_close(slsg->usb_handle);
+ libusb_exit(slsg->libusb_ctx);
+ free(sl);
+ free(slsg);
+ return NULL;
+ }
+ }
+
+ if (libusb_claim_interface(slsg->usb_handle, 0)) {
+ WLOG("libusb_claim_interface() failed\n");
+ libusb_close(slsg->usb_handle);
+ libusb_exit(slsg->libusb_ctx);
+ free(sl);
+ free(slsg);
+ return NULL;
+ }
+
+ // assumption: endpoint config is fixed mang. really.
+ slsg->ep_rep = 1 /* ep rep */ | LIBUSB_ENDPOINT_IN;
+ slsg->ep_req = 2 /* ep req */ | LIBUSB_ENDPOINT_OUT;
+
DLOG("Successfully opened stlinkv1 by libusb :)\n");
sl->verbose = verbose;
sl->core_stat = STLINK_CORE_STAT_UNKNOWN;
slsg->q_addr = 0;
- clear_buf(sl);
-
- /* flash memory settings */
- sl->flash_base = STM32_FLASH_BASE;
- sl->flash_size = STM32_FLASH_SIZE;
- sl->flash_pgsz = STM32_FLASH_PGSZ;
-
- /* system memory */
- sl->sys_base = STM32_SYSTEM_BASE;
- sl->sys_size = STM32_SYSTEM_SIZE;
-
- /* sram memory settings */
- sl->sram_base = STM32_SRAM_BASE;
- sl->sram_size = STM32_SRAM_SIZE;
return sl;
}
-
-stlink_t* stlink_v1_open(const char *dev_name, const int verbose) {
+stlink_t* stlink_v1_open_inner(const int verbose) {
ugly_init(verbose);
- stlink_t *sl = stlink_open(dev_name, verbose);
+ stlink_t *sl = stlink_open(verbose);
if (sl == NULL) {
fputs("Error: could not open stlink device\n", stderr);
return NULL;
}
stlink_version(sl);
- struct stlink_libsg *sg = sl->backend_data;
-
if ((sl->version.st_vid != USB_ST_VID) || (sl->version.stlink_pid != USB_STLINK_PID)) {
- fprintf(stderr, "Error: the device %s is not a stlink\n",
- dev_name);
- fprintf(stderr, " VID: got %04x expect %04x \n",
- sl->version.st_vid, USB_ST_VID);
- fprintf(stderr, " PID: got %04x expect %04x \n",
- sl->version.stlink_pid, USB_STLINK_PID);
+ ugly_log(UERROR, LOG_TAG,
+ "WTF? successfully opened, but unable to read version details. BROKEN!\n");
return NULL;
}
- DLOG("\n*** stlink_force_open ***\n");
+ DLOG("Reading current mode...\n");
switch (stlink_current_mode(sl)) {
- case STLINK_DEV_MASS_MODE:
- return sl;
- case STLINK_DEV_DEBUG_MODE:
- // TODO go to mass?
+ case STLINK_DEV_MASS_MODE:
return sl;
+ case STLINK_DEV_DEBUG_MODE:
+ // TODO go to mass?
+ return sl;
+ default:
+ ILOG("Current mode unusable, trying to get back to a useful state...\n");
+ break;
}
- DLOG("\n*** switch the stlink to mass mode ***\n");
+
+ DLOG("Attempting to exit DFU mode\n");
_stlink_sg_exit_dfu_mode(sl);
- // exit the dfu mode -> the device is gone
- DLOG("\n*** reopen the stlink device ***\n");
- delay(1000);
- stlink_close(sl);
- delay(5000);
+
+ // re-query device info (and retest)
+ stlink_version(sl);
+ if ((sl->version.st_vid != USB_ST_VID) || (sl->version.stlink_pid != USB_STLINK_PID)) {
+ ugly_log(UERROR, LOG_TAG,
+ "WTF? successfully opened, but unable to read version details. BROKEN!\n");
+ return NULL;
+ }
- sl = stlink_open(dev_name, verbose);
+ return sl;
+}
+
+stlink_t* stlink_v1_open(const int verbose) {
+ stlink_t *sl = stlink_v1_open_inner(verbose);
if (sl == NULL) {
fputs("Error: could not open stlink device\n", stderr);
return NULL;
}
- // re-query device info
- stlink_version(sl);
+ // by now, it _must_ be fully open and in a useful mode....
+ stlink_enter_swd_mode(sl);
+ /* Now we are ready to read the parameters */
+ stlink_reset(sl);
+ stlink_load_device_params(sl);
+ ILOG("Successfully opened a stlink v1 debugger\n");
return sl;
}
-
-static void __attribute__((unused)) mark_buf(stlink_t *sl) {
- clear_buf(sl);
- sl->q_buf[0] = 0x12;
- sl->q_buf[1] = 0x34;
- sl->q_buf[2] = 0x56;
- sl->q_buf[3] = 0x78;
- sl->q_buf[4] = 0x90;
- sl->q_buf[15] = 0x42;
- sl->q_buf[16] = 0x43;
- sl->q_buf[63] = 0x42;
- sl->q_buf[64] = 0x43;
- sl->q_buf[1024 * 6 - 1] = 0x42; //6kB
- sl->q_buf[1024 * 8 - 1] = 0x42; //8kB
-}