#define STM32_CHIPID_F4 0x413
#define STM32_CHIPID_F4_HD 0x419
#define STM32_CHIPID_F4_LP 0x423
+#define STM32_CHIPID_F4_DE 0x433
#define STM32_CHIPID_F1_HIGH 0x414
#define STM32_CHIPID_L1_MEDIUM 0x416
#define STM32_CHIPID_L1_MEDIUM_PLUS 0x427
* 0x436 HIGH.
*/
#define STM32_CHIPID_L1_HIGH 0x436
+#define STM32_CHIPID_L152_RE 0x437
#define STM32_CHIPID_F1_CONN 0x418
#define STM32_CHIPID_F1_VL_MEDIUM 0x420
#define STM32_CHIPID_F1_VL_HIGH 0x428
#define STM32_CHIPID_F1_XL 0x430
#define STM32_CHIPID_F0 0x440
#define STM32_CHIPID_F0_SMALL 0x444
+#define STM32_CHIPID_F0_CAN 0x448
// Constant STM32 memory map figures
#define STM32_FLASH_BASE 0x08000000
.bootrom_base = 0x1fff0000,
.bootrom_size = 0x7800
},
+ {
+ .chip_id = STM32_CHIPID_F4_DE,
+ .description = "F4 device (Dynamic Efficency)",
+ .flash_size_reg = 0x1FFF7A22,
+ .flash_pagesize = 0x4000,
+ .sram_size = 0x18000,
+ .bootrom_base = 0x1fff0000,
+ .bootrom_size = 0x7800
+ },
{
.chip_id = STM32_CHIPID_F1_HIGH,
.description = "F1 High-density device",
.bootrom_base = 0x1ff00000,
.bootrom_size = 0x1000
},
-
+ {
+ .chip_id = STM32_CHIPID_L152_RE,
+ .description = "L152RE",
+ .flash_size_reg = 0x1ff800cc,
+ .flash_pagesize = 0x100,
+ .sram_size = 0x14000, /*Not completely clear if there are some with 32K*/
+ .bootrom_base = 0x1ff00000,
+ .bootrom_size = 0x1000
+ },
{
.chip_id = STM32_CHIPID_F1_CONN,
.description = "F1 Connectivity line device",
.bootrom_base = 0x1fffe000,
.bootrom_size = 0x1800
},
+ {
+ //Use this as an example for mapping future chips:
+ //RM0091 document was used to find these paramaters
+ .chip_id = STM32_CHIPID_F0_CAN,
+ .description = "F07x device",
+ .flash_size_reg = 0x1ffff7cc, // "Flash size data register" (pg735)
+ .flash_pagesize = 0x800, // Page sizes listed in Table 4
+ .sram_size = 0x4000, // "SRAM" byte size in hex from Table 2
+ .bootrom_base = 0x1fffC800, // "System memory" starting address from Table 2
+ .bootrom_size = 0x3000 // "System memory" byte size in hex from Table 2
+ },
{
//Use this as an example for mapping future chips:
//RM0091 document was used to find these paramaters