Merge pull request #320 from pavel-kirienko/master

[fw/stlink] / src / stlink-common.h

diff --git a/src/stlink-common.h b/src/stlink-common.h
index aeeaa85a4778e3eb7cc57e15a0a00bfbc6793b2f..c3ac48d03ec4384cc0a8a6e9776119effb77878c 100644 (file)
--- a/src/stlink-common.h
+++ b/src/stlink-common.h
@@ -110,6 +110,7 @@ extern "C" {
 #define STM32_CHIPID_F4_HD          0x419
 #define STM32_CHIPID_F1_VL_MEDIUM_LOW 0x420
 
+#define STM32_CHIPID_F446           0x421
 #define STM32_CHIPID_F3             0x422
 #define STM32_CHIPID_F4_LP          0x423
 
@@ -117,6 +118,7 @@ extern "C" {
 
 #define STM32_CHIPID_L1_MEDIUM_PLUS 0x427
 #define STM32_CHIPID_F1_VL_HIGH     0x428
+#define STM32_CHIPID_L1_CAT2        0x429
 
 #define STM32_CHIPID_F1_XL          0x430
 
@@ -129,11 +131,13 @@ extern "C" {
 
 #define STM32_CHIPID_F3_SMALL       0x439
 #define STM32_CHIPID_F0             0x440
-
+#define STM32_CHIPID_F09X           0x442
 #define STM32_CHIPID_F0_SMALL       0x444
 
 #define STM32_CHIPID_F04            0x445
 
+#define STM32_CHIPID_F303_HIGH      0x446
+
 #define STM32_CHIPID_F0_CAN         0x448
 
     /*
@@ -262,6 +266,15 @@ extern "C" {
             .bootrom_base = 0x1ff00000,
             .bootrom_size = 0x1000
         },
+        {
+            .chip_id = STM32_CHIPID_L1_CAT2,
+            .description = "L1 Cat.2 device",
+            .flash_size_reg = 0x1ff8004c,
+            .flash_pagesize = 0x100,
+            .sram_size = 0x8000,
+            .bootrom_base = 0x1ff00000,
+            .bootrom_size = 0x1000
+        },
         {
             .chip_id = STM32_CHIPID_L1_MEDIUM_PLUS,
             .description = "L1 Medium-Plus-density device",
@@ -307,6 +320,16 @@ extern "C" {
             .bootrom_base = 0x1ffff000,
             .bootrom_size = 0x800
         },
+        {
+            // STM32F446x family. Support based on DM00135183.pdf (RM0390) document.
+            .chip_id = STM32_CHIPID_F446,
+            .description = "F446 device",
+            .flash_size_reg = 0x1fff7a22,
+            .flash_pagesize = 0x20000,
+            .sram_size = 0x20000,
+            .bootrom_base = 0x1fff0000,
+            .bootrom_size = 0x7800
+        },
         {
             // This is STK32F303VCT6 device from STM32 F3 Discovery board.
             // Support based on DM00043574.pdf (RM0316) document.
@@ -369,6 +392,15 @@ extern "C" {
             .bootrom_base = 0x1fffec00,                // "System memory" starting address from Table 2
             .bootrom_size = 0xC00              // "System memory" byte size in hex from Table 2
         },
+       {
+            .chip_id = STM32_CHIPID_F09X,
+            .description = "F09X device",
+            .flash_size_reg = 0x1ffff7cc,      // "Flash size data register" (pg735)
+            .flash_pagesize = 0x800,           // Page sizes listed in Table 4 (pg 56)
+            .sram_size = 0x8000,               // "SRAM" byte size in hex from Table 2 (pg 50)
+            .bootrom_base = 0x1fffd800,                // "System memory" starting address from Table 2
+            .bootrom_size = 0x2000             // "System memory" byte size in hex from Table 2
+        },
         {
             //Use this as an example for mapping future chips:
             //RM0091 document was used to find these paramaters
@@ -376,7 +408,7 @@ extern "C" {
             .description = "F04x device",
             .flash_size_reg = 0x1ffff7cc,      // "Flash size data register" (pg735)
             .flash_pagesize = 0x400,           // Page sizes listed in Table 4
-            .sram_size = 0x1000,               // "SRAM" byte size in hex from Table 2
+            .sram_size = 0x1800,               // "SRAM" byte size in hex from Table 2
             .bootrom_base = 0x1fffec00,                // "System memory" starting address from Table 2
             .bootrom_size = 0xC00              // "System memory" byte size in hex from Table 2
         },
@@ -423,6 +455,17 @@ extern "C" {
             .bootrom_base = 0x1fffd800,
             .bootrom_size = 0x2000
         },
+        {
+            // This is STK32F303RET6 device from STM32 F3 Nucelo board.
+            // Support based on DM00043574.pdf (RM0316) document rev 5.
+            .chip_id = STM32_CHIPID_F303_HIGH,
+            .description = "F303 high density device",
+            .flash_size_reg = 0x1ffff7cc,    // 34.2.1 Flash size data register
+            .flash_pagesize = 0x800,         // 4.2.1 Flash memory organization
+            .sram_size = 0x10000,            // 3.3 Embedded SRAM
+            .bootrom_base = 0x1fffd800,      // 3.3.2 / Table 4 System Memory
+            .bootrom_size = 0x2000
+        },
 
  };