*/
#ifndef STLINK_COMMON_H
-#define STLINK_COMMON_H
+#define STLINK_COMMON_H
#ifdef __cplusplus
extern "C" {
#define STLINK_JTAG_DRIVE_NRST 0x3c
#define STLINK_JTAG_DRIVE_NRST 0x3c
-// cortex m3 technical reference manual
+ // cortex m3 technical reference manual
#define CM3_REG_CPUID 0xE000ED00
#define CM3_REG_FP_CTRL 0xE0002000
#define CM3_REG_FP_COMP0 0xE0002008
-/* cortex core ids */
+ /* cortex core ids */
// TODO clean this up...
#define STM32VL_CORE_ID 0x1ba01477
#define STM32L_CORE_ID 0x2ba01477
#define CORE_M3_R2 0x4BA00477
#define CORE_M4_R0 0x2BA01477
-/*
- * Chip IDs are explained in the appropriate programming manual for the
- * DBGMCU_IDCODE register (0xE0042000)
- */
-// stm32 chipids, only lower 12 bits..
-#define STM32_CHIPID_F1_MEDIUM 0x410
-#define STM32_CHIPID_F2 0x411
-#define STM32_CHIPID_F1_LOW 0x412
-#define STM32_CHIPID_F3 0x422
-#define STM32_CHIPID_F37x 0x432
-#define STM32_CHIPID_F4 0x413
-#define STM32_CHIPID_F4_HD 0x419
-#define STM32_CHIPID_F4_LP 0x423
-#define STM32_CHIPID_F4_DE 0x433
-#define STM32_CHIPID_F1_HIGH 0x414
-#define STM32_CHIPID_L1_MEDIUM 0x416
+ /*
+ * Chip IDs are explained in the appropriate programming manual for the
+ * DBGMCU_IDCODE register (0xE0042000)
+ */
+ // stm32 chipids, only lower 12 bits..
+#define STM32_CHIPID_F1_MEDIUM 0x410
+#define STM32_CHIPID_F2 0x411
+#define STM32_CHIPID_F1_LOW 0x412
+#define STM32_CHIPID_F4 0x413
+#define STM32_CHIPID_F1_HIGH 0x414
+
+#define STM32_CHIPID_L1_MEDIUM 0x416
+#define STM32_CHIPID_L0 0x417
+#define STM32_CHIPID_F1_CONN 0x418
+#define STM32_CHIPID_F4_HD 0x419
+#define STM32_CHIPID_F1_VL_MEDIUM_LOW 0x420
+
+#define STM32_CHIPID_F3 0x422
+#define STM32_CHIPID_F4_LP 0x423
+
+#define STM32_CHIPID_F411RE 0x431
+
#define STM32_CHIPID_L1_MEDIUM_PLUS 0x427
-/*
- * 0x436 is actually assigned to some L1 chips that are called "Medium-Plus"
- * and some that are called "High". 0x427 is assigned to the other "Medium-
- * plus" chips. To make it a bit simpler we just call 427 MEDIUM_PLUS and
- * 0x436 HIGH.
- */
-#define STM32_CHIPID_L1_HIGH 0x436
-#define STM32_CHIPID_L152_RE 0x437
-#define STM32_CHIPID_F1_CONN 0x418
-#define STM32_CHIPID_F1_VL_MEDIUM 0x420
-#define STM32_CHIPID_F1_VL_HIGH 0x428
-#define STM32_CHIPID_F1_XL 0x430
-#define STM32_CHIPID_F0 0x440
-#define STM32_CHIPID_F0_SMALL 0x444
-#define STM32_CHIPID_F0_CAN 0x448
-
-// Constant STM32 memory map figures
+#define STM32_CHIPID_F1_VL_HIGH 0x428
+
+#define STM32_CHIPID_F1_XL 0x430
+
+#define STM32_CHIPID_F37x 0x432
+#define STM32_CHIPID_F4_DE 0x433
+
+#define STM32_CHIPID_L1_HIGH 0x436
+#define STM32_CHIPID_L152_RE 0x437
+#define STM32_CHIPID_F334 0x438
+
+#define STM32_CHIPID_F3_SMALL 0x439
+#define STM32_CHIPID_F0 0x440
+
+#define STM32_CHIPID_F0_SMALL 0x444
+
+#define STM32_CHIPID_F04 0x445
+
+#define STM32_CHIPID_F0_CAN 0x448
+
+ /*
+ * 0x436 is actually assigned to some L1 chips that are called "Medium-Plus"
+ * and some that are called "High". 0x427 is assigned to the other "Medium-
+ * plus" chips. To make it a bit simpler we just call 427 MEDIUM_PLUS and
+ * 0x436 HIGH.
+ */
+
+ // Constant STM32 memory map figures
#define STM32_FLASH_BASE 0x08000000
#define STM32_SRAM_BASE 0x20000000
-/* Cortex™-M3 Technical Reference Manual */
-/* Debug Halting Control and Status Register */
+ /* Cortex™-M3 Technical Reference Manual */
+ /* Debug Halting Control and Status Register */
#define DHCSR 0xe000edf0
#define DCRSR 0xe000edf4
#define DCRDR 0xe000edf8
#define DBGKEY 0xa05f0000
-/* Enough space to hold both a V2 command or a V1 command packaged as generic scsi*/
+ /* Enough space to hold both a V2 command or a V1 command packaged as generic scsi*/
#define C_BUF_LEN 32
typedef struct chip_params_ {
- uint32_t chip_id;
- char* description;
+ uint32_t chip_id;
+ char* description;
uint32_t flash_size_reg;
- uint32_t flash_pagesize;
- uint32_t sram_size;
- uint32_t bootrom_base, bootrom_size;
+ uint32_t flash_pagesize;
+ uint32_t sram_size;
+ uint32_t bootrom_base, bootrom_size;
} chip_params_t;
-// These maps are from a combination of the Programming Manuals, and
-// also the Reference manuals. (flash size reg is normally in ref man)
-static const chip_params_t devices[] = {
+ // These maps are from a combination of the Programming Manuals, and
+ // also the Reference manuals. (flash size reg is normally in ref man)
+ static const chip_params_t devices[] = {
{ // table 2, PM0063
.chip_id = STM32_CHIPID_F1_MEDIUM,
.description = "F1 Medium-density device",
.flash_size_reg = 0x1ffff7e0,
- .flash_pagesize = 0x400,
- .sram_size = 0x5000,
- .bootrom_base = 0x1ffff000,
- .bootrom_size = 0x800
+ .flash_pagesize = 0x400,
+ .sram_size = 0x5000,
+ .bootrom_base = 0x1ffff000,
+ .bootrom_size = 0x800
},
{ // table 1, PM0059
.chip_id = STM32_CHIPID_F2,
- .description = "F2 device",
- .flash_size_reg = 0x1fff7a22, /* As in RM0033 Rev 5*/
- .flash_pagesize = 0x20000,
- .sram_size = 0x20000,
- .bootrom_base = 0x1fff0000,
- .bootrom_size = 0x7800
+ .description = "F2 device",
+ .flash_size_reg = 0x1fff7a22, /* As in RM0033 Rev 5*/
+ .flash_pagesize = 0x20000,
+ .sram_size = 0x20000,
+ .bootrom_base = 0x1fff0000,
+ .bootrom_size = 0x7800
},
{ // PM0063
.chip_id = STM32_CHIPID_F1_LOW,
- .description = "F1 Low-density device",
- .flash_size_reg = 0x1ffff7e0,
- .flash_pagesize = 0x400,
- .sram_size = 0x2800,
- .bootrom_base = 0x1ffff000,
- .bootrom_size = 0x800
+ .description = "F1 Low-density device",
+ .flash_size_reg = 0x1ffff7e0,
+ .flash_pagesize = 0x400,
+ .sram_size = 0x2800,
+ .bootrom_base = 0x1ffff000,
+ .bootrom_size = 0x800
},
{
.chip_id = STM32_CHIPID_F4,
- .description = "F4 device",
- .flash_size_reg = 0x1FFF7A22, /* As in rm0090 since Rev 2*/
- .flash_pagesize = 0x4000,
- .sram_size = 0x30000,
- .bootrom_base = 0x1fff0000,
- .bootrom_size = 0x7800
+ .description = "F4 device",
+ .flash_size_reg = 0x1FFF7A22, /* As in rm0090 since Rev 2*/
+ .flash_pagesize = 0x4000,
+ .sram_size = 0x30000,
+ .bootrom_base = 0x1fff0000,
+ .bootrom_size = 0x7800
},
{
.chip_id = STM32_CHIPID_F4_HD,
- .description = "F42x and F43x device",
- .flash_size_reg = 0x1FFF7A22, /* As in rm0090 since Rev 2*/
- .flash_pagesize = 0x4000,
- .sram_size = 0x30000,
- .bootrom_base = 0x1fff0000,
- .bootrom_size = 0x7800
+ .description = "F42x and F43x device",
+ .flash_size_reg = 0x1FFF7A22, /* As in rm0090 since Rev 2*/
+ .flash_pagesize = 0x4000,
+ .sram_size = 0x40000,
+ .bootrom_base = 0x1fff0000,
+ .bootrom_size = 0x7800
},
{
.chip_id = STM32_CHIPID_F4_LP,
- .description = "F4 device (low power)",
- .flash_size_reg = 0x1FFF7A22,
- .flash_pagesize = 0x4000,
- .sram_size = 0x10000,
- .bootrom_base = 0x1fff0000,
- .bootrom_size = 0x7800
+ .description = "F4 device (low power)",
+ .flash_size_reg = 0x1FFF7A22,
+ .flash_pagesize = 0x4000,
+ .sram_size = 0x10000,
+ .bootrom_base = 0x1fff0000,
+ .bootrom_size = 0x7800
+ },
+ {
+ .chip_id = STM32_CHIPID_F411RE,
+ .description = "F4 device (low power) - stm32f411re",
+ .flash_size_reg = 0x1FFF7A22,
+ .flash_pagesize = 0x4000,
+ .sram_size = 0x20000,
+ .bootrom_base = 0x1fff0000,
+ .bootrom_size = 0x7800
},
{
.chip_id = STM32_CHIPID_F4_DE,
- .description = "F4 device (Dynamic Efficency)",
- .flash_size_reg = 0x1FFF7A22,
- .flash_pagesize = 0x4000,
- .sram_size = 0x18000,
- .bootrom_base = 0x1fff0000,
- .bootrom_size = 0x7800
+ .description = "F4 device (Dynamic Efficency)",
+ .flash_size_reg = 0x1FFF7A22,
+ .flash_pagesize = 0x4000,
+ .sram_size = 0x18000,
+ .bootrom_base = 0x1fff0000,
+ .bootrom_size = 0x7800
},
{
.chip_id = STM32_CHIPID_F1_HIGH,
- .description = "F1 High-density device",
- .flash_size_reg = 0x1ffff7e0,
- .flash_pagesize = 0x800,
- .sram_size = 0x10000,
- .bootrom_base = 0x1ffff000,
- .bootrom_size = 0x800
+ .description = "F1 High-density device",
+ .flash_size_reg = 0x1ffff7e0,
+ .flash_pagesize = 0x800,
+ .sram_size = 0x10000,
+ .bootrom_base = 0x1ffff000,
+ .bootrom_size = 0x800
},
{
- // This ignores the EEPROM! (and uses the page erase size,
- // not the sector write protection...)
+ // This ignores the EEPROM! (and uses the page erase size,
+ // not the sector write protection...)
.chip_id = STM32_CHIPID_L1_MEDIUM,
- .description = "L1 Med-density device",
- .flash_size_reg = 0x1ff8004c,
- .flash_pagesize = 0x100,
- .sram_size = 0x4000,
- .bootrom_base = 0x1ff00000,
- .bootrom_size = 0x1000
+ .description = "L1 Med-density device",
+ .flash_size_reg = 0x1ff8004c,
+ .flash_pagesize = 0x100,
+ .sram_size = 0x4000,
+ .bootrom_base = 0x1ff00000,
+ .bootrom_size = 0x1000
},
{
.chip_id = STM32_CHIPID_L1_MEDIUM_PLUS,
- .description = "L1 Medium-Plus-density device",
- .flash_size_reg = 0x1ff800cc,
- .flash_pagesize = 0x100,
- .sram_size = 0x8000,/*Not completely clear if there are some with 48K*/
- .bootrom_base = 0x1ff00000,
- .bootrom_size = 0x1000
+ .description = "L1 Medium-Plus-density device",
+ .flash_size_reg = 0x1ff800cc,
+ .flash_pagesize = 0x100,
+ .sram_size = 0x8000,/*Not completely clear if there are some with 48K*/
+ .bootrom_base = 0x1ff00000,
+ .bootrom_size = 0x1000
},
{
.chip_id = STM32_CHIPID_L1_HIGH,
- .description = "L1 High-density device",
- .flash_size_reg = 0x1ff800cc,
- .flash_pagesize = 0x100,
- .sram_size = 0xC000, /*Not completely clear if there are some with 32K*/
- .bootrom_base = 0x1ff00000,
- .bootrom_size = 0x1000
+ .description = "L1 High-density device",
+ .flash_size_reg = 0x1ff800cc,
+ .flash_pagesize = 0x100,
+ .sram_size = 0xC000, /*Not completely clear if there are some with 32K*/
+ .bootrom_base = 0x1ff00000,
+ .bootrom_size = 0x1000
},
{
.chip_id = STM32_CHIPID_L152_RE,
- .description = "L152RE",
- .flash_size_reg = 0x1ff800cc,
- .flash_pagesize = 0x100,
- .sram_size = 0x14000, /*Not completely clear if there are some with 32K*/
- .bootrom_base = 0x1ff00000,
- .bootrom_size = 0x1000
+ .description = "L152RE",
+ .flash_size_reg = 0x1ff800cc,
+ .flash_pagesize = 0x100,
+ .sram_size = 0x14000, /*Not completely clear if there are some with 32K*/
+ .bootrom_base = 0x1ff00000,
+ .bootrom_size = 0x1000
},
{
.chip_id = STM32_CHIPID_F1_CONN,
- .description = "F1 Connectivity line device",
- .flash_size_reg = 0x1ffff7e0,
- .flash_pagesize = 0x800,
- .sram_size = 0x10000,
- .bootrom_base = 0x1fffb000,
- .bootrom_size = 0x4800
+ .description = "F1 Connectivity line device",
+ .flash_size_reg = 0x1ffff7e0,
+ .flash_pagesize = 0x800,
+ .sram_size = 0x10000,
+ .bootrom_base = 0x1fffb000,
+ .bootrom_size = 0x4800
},
- {
- .chip_id = STM32_CHIPID_F1_VL_MEDIUM,
- .description = "F1 Medium-density Value Line device",
- .flash_size_reg = 0x1ffff7e0,
- .flash_pagesize = 0x400,
- .sram_size = 0x2000,
- .bootrom_base = 0x1ffff000,
- .bootrom_size = 0x800
+ {//Low and Medium density VL have same chipid. RM0041 25.6.1
+ .chip_id = STM32_CHIPID_F1_VL_MEDIUM_LOW,
+ .description = "F1 Medium/Low-density Value Line device",
+ .flash_size_reg = 0x1ffff7e0,
+ .flash_pagesize = 0x400,
+ .sram_size = 0x2000,//0x1000 for low density devices
+ .bootrom_base = 0x1ffff000,
+ .bootrom_size = 0x800
},
{
- // This is STK32F303VCT6 device from STM32 F3 Discovery board.
- // Support based on DM00043574.pdf (RM0316) document.
+ // This is STK32F303VCT6 device from STM32 F3 Discovery board.
+ // Support based on DM00043574.pdf (RM0316) document.
.chip_id = STM32_CHIPID_F3,
- .description = "F3 device",
- .flash_size_reg = 0x1ffff7cc,
- .flash_pagesize = 0x800,
- .sram_size = 0xa000,
- .bootrom_base = 0x1ffff000,
- .bootrom_size = 0x800
+ .description = "F3 device",
+ .flash_size_reg = 0x1ffff7cc,
+ .flash_pagesize = 0x800,
+ .sram_size = 0xa000,
+ .bootrom_base = 0x1ffff000,
+ .bootrom_size = 0x800
},
{
- // This is STK32F373VCT6 device from STM32 F373 eval board
- // Support based on 303 above (37x and 30x have same memory map)
+ // This is STK32F373VCT6 device from STM32 F373 eval board
+ // Support based on 303 above (37x and 30x have same memory map)
.chip_id = STM32_CHIPID_F37x,
- .description = "F3 device",
- .flash_size_reg = 0x1ffff7cc,
- .flash_pagesize = 0x800,
- .sram_size = 0xa000,
- .bootrom_base = 0x1ffff000,
- .bootrom_size = 0x800
+ .description = "F3 device",
+ .flash_size_reg = 0x1ffff7cc,
+ .flash_pagesize = 0x800,
+ .sram_size = 0xa000,
+ .bootrom_base = 0x1ffff000,
+ .bootrom_size = 0x800
},
{
.chip_id = STM32_CHIPID_F1_VL_HIGH,
- .description = "F1 High-density value line device",
- .flash_size_reg = 0x1ffff7e0,
- .flash_pagesize = 0x800,
- .sram_size = 0x8000,
- .bootrom_base = 0x1ffff000,
- .bootrom_size = 0x800
+ .description = "F1 High-density value line device",
+ .flash_size_reg = 0x1ffff7e0,
+ .flash_pagesize = 0x800,
+ .sram_size = 0x8000,
+ .bootrom_base = 0x1ffff000,
+ .bootrom_size = 0x800
},
{
.chip_id = STM32_CHIPID_F1_XL,
- .description = "F1 XL-density device",
- .flash_size_reg = 0x1ffff7e0,
- .flash_pagesize = 0x800,
- .sram_size = 0x18000,
- .bootrom_base = 0x1fffe000,
- .bootrom_size = 0x1800
+ .description = "F1 XL-density device",
+ .flash_size_reg = 0x1ffff7e0,
+ .flash_pagesize = 0x800,
+ .sram_size = 0x18000,
+ .bootrom_base = 0x1fffe000,
+ .bootrom_size = 0x1800
},
- {
- //Use this as an example for mapping future chips:
- //RM0091 document was used to find these paramaters
+ {
+ //Use this as an example for mapping future chips:
+ //RM0091 document was used to find these paramaters
.chip_id = STM32_CHIPID_F0_CAN,
- .description = "F07x device",
- .flash_size_reg = 0x1ffff7cc, // "Flash size data register" (pg735)
- .flash_pagesize = 0x800, // Page sizes listed in Table 4
- .sram_size = 0x4000, // "SRAM" byte size in hex from Table 2
- .bootrom_base = 0x1fffC800, // "System memory" starting address from Table 2
- .bootrom_size = 0x3000 // "System memory" byte size in hex from Table 2
+ .description = "F07x device",
+ .flash_size_reg = 0x1ffff7cc, // "Flash size data register" (pg735)
+ .flash_pagesize = 0x800, // Page sizes listed in Table 4
+ .sram_size = 0x4000, // "SRAM" byte size in hex from Table 2
+ .bootrom_base = 0x1fffC800, // "System memory" starting address from Table 2
+ .bootrom_size = 0x3000 // "System memory" byte size in hex from Table 2
},
{
//Use this as an example for mapping future chips:
//RM0091 document was used to find these paramaters
.chip_id = STM32_CHIPID_F0,
- .description = "F0 device",
- .flash_size_reg = 0x1ffff7cc, // "Flash size data register" (pg735)
- .flash_pagesize = 0x400, // Page sizes listed in Table 4
- .sram_size = 0x2000, // "SRAM" byte size in hex from Table 2
- .bootrom_base = 0x1fffec00, // "System memory" starting address from Table 2
- .bootrom_size = 0xC00 // "System memory" byte size in hex from Table 2
+ .description = "F0 device",
+ .flash_size_reg = 0x1ffff7cc, // "Flash size data register" (pg735)
+ .flash_pagesize = 0x400, // Page sizes listed in Table 4
+ .sram_size = 0x2000, // "SRAM" byte size in hex from Table 2
+ .bootrom_base = 0x1fffec00, // "System memory" starting address from Table 2
+ .bootrom_size = 0xC00 // "System memory" byte size in hex from Table 2
+ },
+ {
+ //Use this as an example for mapping future chips:
+ //RM0091 document was used to find these paramaters
+ .chip_id = STM32_CHIPID_F04,
+ .description = "F04x device",
+ .flash_size_reg = 0x1ffff7cc, // "Flash size data register" (pg735)
+ .flash_pagesize = 0x400, // Page sizes listed in Table 4
+ .sram_size = 0x1000, // "SRAM" byte size in hex from Table 2
+ .bootrom_base = 0x1fffec00, // "System memory" starting address from Table 2
+ .bootrom_size = 0xC00 // "System memory" byte size in hex from Table 2
},
{
//Use this as an example for mapping future chips:
//RM0091 document was used to find these paramaters
.chip_id = STM32_CHIPID_F0_SMALL,
- .description = "F0 small device",
- .flash_size_reg = 0x1ffff7cc, // "Flash size data register" (pg735)
- .flash_pagesize = 0x400, // Page sizes listed in Table 4
- .sram_size = 0x1000, // "SRAM" byte size in hex from Table 2
- .bootrom_base = 0x1fffec00, // "System memory" starting address from Table 2
- .bootrom_size = 0xC00 // "System memory" byte size in hex from Table 2
+ .description = "F0 small device",
+ .flash_size_reg = 0x1ffff7cc, // "Flash size data register" (pg735)
+ .flash_pagesize = 0x400, // Page sizes listed in Table 4
+ .sram_size = 0x1000, // "SRAM" byte size in hex from Table 2
+ .bootrom_base = 0x1fffec00, // "System memory" starting address from Table 2
+ .bootrom_size = 0xC00 // "System memory" byte size in hex from Table 2
+ },
+ {
+ // STM32F30x
+ .chip_id = STM32_CHIPID_F3_SMALL,
+ .description = "F3 small device",
+ .flash_size_reg = 0x1ffff7cc,
+ .flash_pagesize = 0x800,
+ .sram_size = 0xa000,
+ .bootrom_base = 0x1fffd800,
+ .bootrom_size = 0x2000
+ },
+ {
+ // STM32L0x
+ // RM0367,RM0377 documents was used to find these parameters
+ .chip_id = STM32_CHIPID_L0,
+ .description = "L0x3 device",
+ .flash_size_reg = 0x1ff8007c,
+ .flash_pagesize = 0x80,
+ .sram_size = 0x2000,
+ .bootrom_base = 0x1ff0000,
+ .bootrom_size = 0x1000
+ },
+ {
+ // STM32F334
+ // RM0364 document was used to find these parameters
+ .chip_id = STM32_CHIPID_F334,
+ .description = "F334 device",
+ .flash_size_reg = 0x1ffff7cc,
+ .flash_pagesize = 0x800,
+ .sram_size = 0x3000,
+ .bootrom_base = 0x1fffd800,
+ .bootrom_size = 0x2000
},
+
};
#endif
#endif /* STLINK_COMMON_H */
-