#define STLINK_GET_VERSION 0xf1
#define STLINK_GET_CURRENT_MODE 0xf5
+#define STLINK_GET_TARGET_VOLTAGE 0xF7
#define STLINK_DEBUG_COMMAND 0xF2
#define STLINK_DFU_COMMAND 0xF3
#define STM32_CHIPID_F3 0x422
#define STM32_CHIPID_F37x 0x432
#define STM32_CHIPID_F4 0x413
+#define STM32_CHIPID_F4_HD 0x419
+#define STM32_CHIPID_F4_LP 0x423
#define STM32_CHIPID_F1_HIGH 0x414
#define STM32_CHIPID_L1_MEDIUM 0x416
+#define STM32_CHIPID_L1_MEDIUM_PLUS 0x427
+/*
+ * 0x436 is actually assigned to some L1 chips that are called "Medium-Plus"
+ * and some that are called "High". 0x427 is assigned to the other "Medium-
+ * plus" chips. To make it a bit simpler we just call 427 MEDIUM_PLUS and
+ * 0x436 HIGH.
+ */
+#define STM32_CHIPID_L1_HIGH 0x436
#define STM32_CHIPID_F1_CONN 0x418
#define STM32_CHIPID_F1_VL_MEDIUM 0x420
#define STM32_CHIPID_F1_VL_HIGH 0x428
#define STM32_CHIPID_F1_XL 0x430
#define STM32_CHIPID_F0 0x440
+#define STM32_CHIPID_F0_SMALL 0x444
// Constant STM32 memory map figures
#define STM32_FLASH_BASE 0x08000000
// also the Reference manuals. (flash size reg is normally in ref man)
static const chip_params_t devices[] = {
{ // table 2, PM0063
- .chip_id = 0x410,
+ .chip_id = STM32_CHIPID_F1_MEDIUM,
.description = "F1 Medium-density device",
.flash_size_reg = 0x1ffff7e0,
.flash_pagesize = 0x400,
.bootrom_size = 0x800
},
{ // table 1, PM0059
- .chip_id = 0x411,
+ .chip_id = STM32_CHIPID_F2,
.description = "F2 device",
- .flash_size_reg = 0, /* no flash size reg found in the docs! */
+ .flash_size_reg = 0x1ff7a22, /* RM0033 sind Rev 4*/
.flash_pagesize = 0x20000,
.sram_size = 0x20000,
.bootrom_base = 0x1fff0000,
.bootrom_size = 0x7800
},
{ // PM0063
- .chip_id = 0x412,
+ .chip_id = STM32_CHIPID_F1_LOW,
.description = "F1 Low-density device",
.flash_size_reg = 0x1ffff7e0,
.flash_pagesize = 0x400,
.bootrom_size = 0x800
},
{
- .chip_id = 0x413,
+ .chip_id = STM32_CHIPID_F4,
.description = "F4 device",
- .flash_size_reg = 0x1FFF7A10, //RM0090 error same as unique ID
+ .flash_size_reg = 0x1FFF7A22, /* As in rm0090 since Rev 2*/
.flash_pagesize = 0x4000,
.sram_size = 0x30000,
.bootrom_base = 0x1fff0000,
.bootrom_size = 0x7800
},
{
- .chip_id = 0x414,
+ .chip_id = STM32_CHIPID_F4_HD,
+ .description = "F42x and F43x device",
+ .flash_size_reg = 0x1FFF7A22, /* As in rm0090 since Rev 2*/
+ .flash_pagesize = 0x4000,
+ .sram_size = 0x30000,
+ .bootrom_base = 0x1fff0000,
+ .bootrom_size = 0x7800
+ },
+ {
+ .chip_id = STM32_CHIPID_F4_LP,
+ .description = "F4 device (low power)",
+ .flash_size_reg = 0x1FFF7A22,
+ .flash_pagesize = 0x4000,
+ .sram_size = 0x10000,
+ .bootrom_base = 0x1fff0000,
+ .bootrom_size = 0x7800
+ },
+ {
+ .chip_id = STM32_CHIPID_F1_HIGH,
.description = "F1 High-density device",
.flash_size_reg = 0x1ffff7e0,
.flash_pagesize = 0x800,
{
// This ignores the EEPROM! (and uses the page erase size,
// not the sector write protection...)
- .chip_id = 0x416,
+ .chip_id = STM32_CHIPID_L1_MEDIUM,
.description = "L1 Med-density device",
.flash_size_reg = 0x1ff8004c,
.flash_pagesize = 0x100,
.bootrom_size = 0x1000
},
{
- .chip_id = 0x418,
+ .chip_id = STM32_CHIPID_L1_MEDIUM_PLUS,
+ .description = "L1 Medium-Plus-density device",
+ .flash_size_reg = 0x1ff800cc,
+ .flash_pagesize = 0x100,
+ .sram_size = 0x8000,/*Not completely clear if there are some with 48K*/
+ .bootrom_base = 0x1ff00000,
+ .bootrom_size = 0x1000
+ },
+ {
+ .chip_id = STM32_CHIPID_L1_HIGH,
+ .description = "L1 High-density device",
+ .flash_size_reg = 0x1ff800cc,
+ .flash_pagesize = 0x100,
+ .sram_size = 0xC000, /*Not completely clear if there are some with 32K*/
+ .bootrom_base = 0x1ff00000,
+ .bootrom_size = 0x1000
+ },
+
+ {
+ .chip_id = STM32_CHIPID_F1_CONN,
.description = "F1 Connectivity line device",
.flash_size_reg = 0x1ffff7e0,
.flash_pagesize = 0x800,
.bootrom_size = 0x4800
},
{
- .chip_id = 0x420,
+ .chip_id = STM32_CHIPID_F1_VL_MEDIUM,
.description = "F1 Medium-density Value Line device",
.flash_size_reg = 0x1ffff7e0,
.flash_pagesize = 0x400,
{
// This is STK32F303VCT6 device from STM32 F3 Discovery board.
// Support based on DM00043574.pdf (RM0316) document.
- .chip_id = 0x422,
+ .chip_id = STM32_CHIPID_F3,
.description = "F3 device",
.flash_size_reg = 0x1ffff7cc,
.flash_pagesize = 0x800,
{
// This is STK32F373VCT6 device from STM32 F373 eval board
// Support based on 303 above (37x and 30x have same memory map)
- .chip_id = 0x432,
+ .chip_id = STM32_CHIPID_F37x,
.description = "F3 device",
.flash_size_reg = 0x1ffff7cc,
.flash_pagesize = 0x800,
.bootrom_size = 0x800
},
{
- .chip_id = 0x428,
+ .chip_id = STM32_CHIPID_F1_VL_HIGH,
.description = "F1 High-density value line device",
.flash_size_reg = 0x1ffff7e0,
.flash_pagesize = 0x800,
.bootrom_size = 0x800
},
{
- .chip_id = 0x430,
+ .chip_id = STM32_CHIPID_F1_XL,
.description = "F1 XL-density device",
.flash_size_reg = 0x1ffff7e0,
.flash_pagesize = 0x800,
{
//Use this as an example for mapping future chips:
//RM0091 document was used to find these paramaters
- .chip_id = 0x440,
+ .chip_id = STM32_CHIPID_F0,
.description = "F0 device",
.flash_size_reg = 0x1ffff7cc, // "Flash size data register" (pg735)
.flash_pagesize = 0x400, // Page sizes listed in Table 4
.sram_size = 0x2000, // "SRAM" byte size in hex from Table 2
.bootrom_base = 0x1fffec00, // "System memory" starting address from Table 2
.bootrom_size = 0xC00 // "System memory" byte size in hex from Table 2
- }
+ },
+ {
+ //Use this as an example for mapping future chips:
+ //RM0091 document was used to find these paramaters
+ .chip_id = STM32_CHIPID_F0_SMALL,
+ .description = "F0 small device",
+ .flash_size_reg = 0x1ffff7cc, // "Flash size data register" (pg735)
+ .flash_pagesize = 0x400, // Page sizes listed in Table 4
+ .sram_size = 0x1000, // "SRAM" byte size in hex from Table 2
+ .bootrom_base = 0x1fffec00, // "System memory" starting address from Table 2
+ .bootrom_size = 0xC00 // "System memory" byte size in hex from Table 2
+ },
};
void (*step) (stlink_t * stl);
int (*current_mode) (stlink_t * stl);
void (*force_debug) (stlink_t *sl);
+ int32_t (*target_voltage) (stlink_t *sl);
} stlink_backend_t;
struct _stlink {
void stlink_step(stlink_t *sl);
int stlink_current_mode(stlink_t *sl);
void stlink_force_debug(stlink_t *sl);
+ int stlink_target_voltage(stlink_t *sl);
// unprocessed
int stlink_erase_flash_mass(stlink_t* sl);
- int stlink_write_flash(stlink_t* sl, stm32_addr_t address, uint8_t* data, unsigned length);
+ int stlink_write_flash(stlink_t* sl, stm32_addr_t address, uint8_t* data, uint32_t length);
int stlink_fwrite_flash(stlink_t *sl, const char* path, stm32_addr_t addr);
int stlink_fwrite_sram(stlink_t *sl, const char* path, stm32_addr_t addr);
- int stlink_verify_write_flash(stlink_t *sl, stm32_addr_t address, uint8_t *data, unsigned length);
+ int stlink_verify_write_flash(stlink_t *sl, stm32_addr_t address, uint8_t *data, uint32_t length);
// PUBLIC
uint32_t stlink_chip_id(stlink_t *sl);