Fix getting error message when successfully using stlinkV2

[fw/stlink] / src / stlink-common.h

diff --git a/src/stlink-common.h b/src/stlink-common.h
index aeeaa85a4778e3eb7cc57e15a0a00bfbc6793b2f..04a1081017806e3601e8a79ac38e4d519ab6d31c 100644 (file)
--- a/src/stlink-common.h
+++ b/src/stlink-common.h
@@ -129,7 +129,7 @@ extern "C" {
 
 #define STM32_CHIPID_F3_SMALL       0x439
 #define STM32_CHIPID_F0             0x440
-
+#define STM32_CHIPID_F09X           0x442
 #define STM32_CHIPID_F0_SMALL       0x444
 
 #define STM32_CHIPID_F04            0x445
@@ -369,6 +369,15 @@ extern "C" {
             .bootrom_base = 0x1fffec00,                // "System memory" starting address from Table 2
             .bootrom_size = 0xC00              // "System memory" byte size in hex from Table 2
         },
+       {
+            .chip_id = STM32_CHIPID_F09X,
+            .description = "F09X device",
+            .flash_size_reg = 0x1ffff7cc,      // "Flash size data register" (pg735)
+            .flash_pagesize = 0x800,           // Page sizes listed in Table 4 (pg 56)
+            .sram_size = 0x8000,               // "SRAM" byte size in hex from Table 2 (pg 50)
+            .bootrom_base = 0x1fffd800,                // "System memory" starting address from Table 2
+            .bootrom_size = 0x2000             // "System memory" byte size in hex from Table 2
+        },
         {
             //Use this as an example for mapping future chips:
             //RM0091 document was used to find these paramaters