#define WLOG(format, args...) ugly_log(UWARN, LOG_TAG, format, ## args)
#define fatal(format, args...) ugly_log(UFATAL, LOG_TAG, format, ## args)
+/* todo: stm32l15xxx flash memory, pm0062 manual */
-/* FPEC flash controller interface, pm0063 manual
- */
-
+/* stm32f FPEC flash controller interface, pm0063 manual */
+// TODO - all of this needs to be abstracted out....
#define FLASH_REGS_ADDR 0x40022000
#define FLASH_REGS_SIZE 0x28
char *p = (char *) &ui;
if (!is_bigendian()) { // le -> le (don't swap)
- p[0] = c[pt];
+ p[0] = c[pt + 0];
p[1] = c[pt + 1];
p[2] = c[pt + 2];
p[3] = c[pt + 3];
p[0] = c[pt + 3];
p[1] = c[pt + 2];
p[2] = c[pt + 1];
- p[3] = c[pt];
+ p[3] = c[pt + 0];
}
return ui;
}
if (is_flash_locked(sl)) {
unlock_flash(sl);
- if (is_flash_locked(sl))
+ if (is_flash_locked(sl)) {
+ WLOG("Failed to unlock flash!\n");
return -1;
+ }
}
-
+ ILOG("Successfully unlocked flash\n");
return 0;
}
return;
}
+/**
+ * reads and decodes the flash parameters, as dynamically as possible
+ * @param sl
+ * @return 0 for success, or -1 for unsupported core type.
+ */
+int stlink_load_device_params(stlink_t *sl) {
+ ILOG("Loading device parameters....\n");
+ const chip_params_t *params = NULL;
+ uint32_t chip_id = stlink_chip_id(sl);
+ sl->chip_id = chip_id;
+ for(size_t i = 0; i < sizeof(devices) / sizeof(devices[0]); i++) {
+ if(devices[i].chip_id == (chip_id & 0xFFF)) {
+ params = &devices[i];
+ break;
+ }
+ }
+ if (params == NULL) {
+ WLOG("unknown chip id! %#x\n", chip_id);
+ return -1;
+ }
+
+ // These are fixed...
+ sl->flash_base = STM32_FLASH_BASE;
+ sl->sram_base = STM32_SRAM_BASE;
+
+ // read flash size from hardware, if possible...
+ if ((chip_id & 0xFFF) == STM32_CHIPID_F2) {
+ sl->flash_size = 0; // FIXME - need to work this out some other way, just set to max possible?
+ } else {
+ stlink_read_mem32(sl, params->flash_size_reg, 4);
+ uint32_t flash_size = sl->q_buf[0] | (sl->q_buf[1] << 8);
+ sl->flash_size = flash_size * 1024;
+ }
+ sl->flash_pgsz = params->flash_pagesize;
+ sl->sram_size = params->sram_size;
+ sl->sys_base = params->bootrom_base;
+ sl->sys_size = params->bootrom_size;
+
+ sl->core_id = stlink_core_id(sl);
+
+ ILOG("Device connected is: %s\n", params->description);
+ ILOG("SRAM size: %#x bytes (%d KiB), Flash: %#x bytes (%d KiB) in pages of %zd bytes\n",
+ sl->sram_size, sl->sram_size / 1024, sl->flash_size, sl->flash_size / 1024,
+ sl->flash_pgsz);
+ return 0;
+}
+
void stlink_reset(stlink_t *sl) {
DLOG("*** stlink_reset ***\n");
sl->backend->reset(sl);
void stlink_version(stlink_t *sl) {
DLOG("*** looking up stlink version\n");
- stlink_version_t slv;
sl->backend->version(sl);
- _parse_version(sl, &slv);
+ _parse_version(sl, &sl->version);
- DLOG("st vid = 0x%04x (expect 0x%04x)\n", slv.st_vid, USB_ST_VID);
- DLOG("stlink pid = 0x%04x\n", slv.stlink_pid);
- DLOG("stlink version = 0x%x\n", slv.stlink_v);
- DLOG("jtag version = 0x%x\n", slv.jtag_v);
- DLOG("swim version = 0x%x\n", slv.swim_v);
- if (slv.jtag_v == 0) {
+ DLOG("st vid = 0x%04x (expect 0x%04x)\n", sl->version.st_vid, USB_ST_VID);
+ DLOG("stlink pid = 0x%04x\n", sl->version.stlink_pid);
+ DLOG("stlink version = 0x%x\n", sl->version.stlink_v);
+ DLOG("jtag version = 0x%x\n", sl->version.jtag_v);
+ DLOG("swim version = 0x%x\n", sl->version.swim_v);
+ if (sl->version.jtag_v == 0) {
DLOG(" notice: the firmware doesn't support a jtag/swd interface\n");
}
- if (slv.swim_v == 0) {
+ if (sl->version.swim_v == 0) {
DLOG(" notice: the firmware doesn't support a swim interface\n");
}
}
void stlink_write_mem32(stlink_t *sl, uint32_t addr, uint16_t len) {
- DLOG("*** stlink_write_mem32 ***\n");
+ DLOG("*** stlink_write_mem32 %u bytes to %#x\n", len, addr);
if (len % 4 != 0) {
fprintf(stderr, "Error: Data length doesn't have a 32 bit alignment: +%d byte.\n", len % 4);
return;
char *p = (char *) &ui;
if (!is_bigendian()) { // le -> le (don't swap)
- p[0] = c[pt];
+ p[0] = c[pt + 0];
p[1] = c[pt + 1];
} else {
p[0] = c[pt + 1];
- p[1] = c[pt];
+ p[1] = c[pt + 0];
}
return ui;
}
if (sl->q_len <= 0)
return;
- stlink_print_data(sl);
-
switch (sl->q_buf[0]) {
case STLINK_CORE_RUNNING:
sl->core_stat = STLINK_CORE_RUNNING;
}
void stlink_print_data(stlink_t * sl) {
- if (sl->q_len <= 0 || sl->verbose < 2)
+ if (sl->q_len <= 0 || sl->verbose < UDEBUG)
return;
if (sl->verbose > 2)
fprintf(stdout, "data_len = %d 0x%x\n", sl->q_len, sl->q_len);
/* do the copy by 1k blocks */
for (off = 0; off < size; off += 1024) {
size_t read_size = 1024;
+ size_t rounded_size;
if ((off + read_size) > size)
- read_size = off + read_size;
+ read_size = size - off;
/* round size if needed */
- if (read_size & 3)
- read_size = (read_size + 4) & ~(3);
+ rounded_size = read_size;
+ if (rounded_size & 3)
+ rounded_size = (rounded_size + 4) & ~(3);
- stlink_read_mem32(sl, addr + off, read_size);
+ stlink_read_mem32(sl, addr + off, rounded_size);
if (write(fd, sl->q_buf, read_size) != (ssize_t) read_size) {
fprintf(stderr, "write() != read_size\n");
return 0;
}
-int stlink_erase_flash_page(stlink_t *sl, stm32_addr_t page) {
- /* page an addr in the page to erase */
+/**
+ * Erase a page of flash, assumes sl is fully populated with things like chip/core ids
+ * @param sl stlink context
+ * @param page
+ * @return 0 on success -ve on failure
+ */
+int stlink_erase_flash_page(stlink_t *sl, stm32_addr_t page)
+{
+ /* page an addr in the page to erase */
+ ILOG("Erasing flash page at addr: %#x\n", page);
+ if (sl->core_id == STM32L_CORE_ID)
+ {
+#define STM32L_FLASH_REGS_ADDR ((uint32_t)0x40023c00)
+#define STM32L_FLASH_ACR (STM32L_FLASH_REGS_ADDR + 0x00)
+#define STM32L_FLASH_PECR (STM32L_FLASH_REGS_ADDR + 0x04)
+#define STM32L_FLASH_PDKEYR (STM32L_FLASH_REGS_ADDR + 0x08)
+#define STM32L_FLASH_PEKEYR (STM32L_FLASH_REGS_ADDR + 0x0c)
+#define STM32L_FLASH_PRGKEYR (STM32L_FLASH_REGS_ADDR + 0x10)
+#define STM32L_FLASH_OPTKEYR (STM32L_FLASH_REGS_ADDR + 0x14)
+#define STM32L_FLASH_SR (STM32L_FLASH_REGS_ADDR + 0x18)
+#define STM32L_FLASH_OBR (STM32L_FLASH_REGS_ADDR + 0x0c)
+#define STM32L_FLASH_WRPR (STM32L_FLASH_REGS_ADDR + 0x20)
+
+ uint32_t val;
+
+ /* disable pecr protection */
+ write_uint32(sl->q_buf, 0x89abcdef);
+ stlink_write_mem32(sl, STM32L_FLASH_PEKEYR, sizeof(uint32_t));
+ write_uint32(sl->q_buf, 0x02030405);
+ stlink_write_mem32(sl, STM32L_FLASH_PEKEYR, sizeof(uint32_t));
+
+ /* check pecr.pelock is cleared */
+ stlink_read_mem32(sl, STM32L_FLASH_PECR, sizeof(uint32_t));
+ val = read_uint32(sl->q_buf, 0);
+ if (val & (1 << 0))
+ {
+ WLOG("pecr.pelock not clear (%#x)\n", val);
+ return -1;
+ }
+
+ /* unlock program memory */
+ write_uint32(sl->q_buf, 0x8c9daebf);
+ stlink_write_mem32(sl, STM32L_FLASH_PRGKEYR, sizeof(uint32_t));
+ write_uint32(sl->q_buf, 0x13141516);
+ stlink_write_mem32(sl, STM32L_FLASH_PRGKEYR, sizeof(uint32_t));
+
+ /* check pecr.prglock is cleared */
+ stlink_read_mem32(sl, STM32L_FLASH_PECR, sizeof(uint32_t));
+ val = read_uint32(sl->q_buf, 0);
+ if (val & (1 << 1))
+ {
+ WLOG("pecr.prglock not clear (%#x)\n", val);
+ return -1;
+ }
+
+ /* unused: unlock the option byte block */
+#if 0
+ write_uint32(sl->q_buf, 0xfbead9c8);
+ stlink_write_mem32(sl, STM32L_FLASH_OPTKEYR, sizeof(uint32_t));
+ write_uint32(sl->q_buf, 0x24252627);
+ stlink_write_mem32(sl, STM32L_FLASH_OPTKEYR, sizeof(uint32_t));
+
+ /* check pecr.optlock is cleared */
+ stlink_read_mem32(sl, STM32L_FLASH_PECR, sizeof(uint32_t));
+ val = read_uint32(sl->q_buf, 0);
+ if (val & (1 << 2))
+ {
+ fprintf(stderr, "pecr.prglock not clear\n");
+ return -1;
+ }
+#endif
+
+ /* set pecr.{erase,prog} */
+ val |= (1 << 9) | (1 << 3);
+ write_uint32(sl->q_buf, val);
+ stlink_write_mem32(sl, STM32L_FLASH_PECR, sizeof(uint32_t));
+
+ /* wait for sr.busy to be cleared */
+ while (1)
+ {
+ stlink_read_mem32(sl, STM32L_FLASH_SR, sizeof(uint32_t));
+ if ((read_uint32(sl->q_buf, 0) & (1 << 0)) == 0) break ;
+ }
+ /* write 0 to the first word of the page to be erased */
+ memset(sl->q_buf, 0, sizeof(uint32_t));
+ stlink_write_mem32(sl, page, sizeof(uint32_t));
+
+ /* reset lock bits */
+ stlink_read_mem32(sl, STM32L_FLASH_PECR, sizeof(uint32_t));
+ val = read_uint32(sl->q_buf, 0) | (1 << 0) | (1 << 1) | (1 << 2);
+ write_uint32(sl->q_buf, val);
+ stlink_write_mem32(sl, STM32L_FLASH_PECR, sizeof(uint32_t));
+ }
+ else if (sl->core_id == STM32VL_CORE_ID)
+ {
/* wait for ongoing op to finish */
wait_flash_busy(sl);
/* relock the flash */
lock_flash(sl);
+ }
+ else {
+ WLOG("unknown coreid: %x\n", sl->core_id);
+ return -1;
+ }
- /* todo: verify the erased page */
+ /* todo: verify the erased page */
- return 0;
+ return 0;
}
int stlink_erase_flash_mass(stlink_t *sl) {
/* allocate the loader in sram */
if (write_loader_to_sram(sl, &fl->loader_addr, &size) == -1) {
- fprintf(stderr, "write_loader_to_sram() == -1\n");
+ WLOG("Failed to write flash loader to sram!\n");
return -1;
}
/* allocate a one page buffer in sram right after loader */
fl->buf_addr = fl->loader_addr + size;
-
+ ILOG("Successfully loaded flash loader in sram\n");
return 0;
}
int write_loader_to_sram(stlink_t *sl, stm32_addr_t* addr, size_t* size) {
/* from openocd, contrib/loaders/flash/stm32.s */
- static const uint8_t loader_code[] = {
+ static const uint8_t loader_code_stm32vl[] = {
0x08, 0x4c, /* ldr r4, STM32_FLASH_BASE */
0x1c, 0x44, /* add r4, r3 */
/* write_half_word: */
0x00, 0x20, 0x02, 0x40, /* STM32_FLASH_BASE: .word 0x40022000 */
};
- memcpy(sl->q_buf, loader_code, sizeof (loader_code));
- stlink_write_mem32(sl, sl->sram_base, sizeof (loader_code));
+ static const uint8_t loader_code_stm32l[] = {
+
+ /* openocd.git/contrib/loaders/flash/stm32lx.S
+ r0, input, dest addr
+ r1, input, source addr
+ r2, input, word count
+ r3, output, word count
+ */
+
+ 0x00, 0x23,
+ 0x04, 0xe0,
+
+ 0x51, 0xf8, 0x04, 0xcb,
+ 0x40, 0xf8, 0x04, 0xcb,
+ 0x01, 0x33,
+
+ 0x93, 0x42,
+ 0xf8, 0xd3,
+ 0x00, 0xbe
+ };
+
+ const uint8_t* loader_code;
+ size_t loader_size;
+
+ if (sl->core_id == STM32L_CORE_ID) /* stm32l */
+ {
+ loader_code = loader_code_stm32l;
+ loader_size = sizeof(loader_code_stm32l);
+ }
+ else if (sl->core_id == STM32VL_CORE_ID)
+ {
+ loader_code = loader_code_stm32vl;
+ loader_size = sizeof(loader_code_stm32vl);
+ }
+ else
+ {
+ WLOG("unknown coreid, not sure what flash loader to use, aborting!: %x\n", sl->core_id);
+ return -1;
+ }
+
+ memcpy(sl->q_buf, loader_code, loader_size);
+ stlink_write_mem32(sl, sl->sram_base, loader_size);
*addr = sl->sram_base;
- *size = sizeof (loader_code);
+ *size = loader_size;
/* success */
return 0;
return res;
}
-// The stlink_fwrite_flash should not muck with mmapped files inside itself,
-// and should use this function instead. (Hell, what's the reason behind mmap
-// there?!) But, as it is not actually used anywhere, nobody cares.
-
-#define WRITE_BLOCK_SIZE 0x40
int stlink_write_flash(stlink_t *sl, stm32_addr_t addr, uint8_t* base, unsigned len) {
size_t off;
flash_loader_t fl;
-
+ ILOG("Attempting to write %d (%#x) bytes to stm32 address: %u (%#x)\n",
+ len, len, addr, addr);
/* check addr range is inside the flash */
if (addr < sl->flash_base) {
- fprintf(stderr, "addr too low\n");
+ WLOG("addr too low %#x < %#x\n", addr, sl->flash_base);
return -1;
} else if ((addr + len) < addr) {
- fprintf(stderr, "addr overruns\n");
+ WLOG("addr overruns\n");
return -1;
} else if ((addr + len) > (sl->flash_base + sl->flash_size)) {
- fprintf(stderr, "addr too high\n");
+ WLOG("addr too high\n");
return -1;
} else if ((addr & 1) || (len & 1)) {
- fprintf(stderr, "unaligned addr or size\n");
+ WLOG("unaligned addr or size\n");
return -1;
- }
-
- /* flash loader initialization */
- if (init_flash_loader(sl, &fl) == -1) {
- fprintf(stderr, "init_flash_loader() == -1\n");
+ } else if (addr & (sl->flash_pgsz - 1)) {
+ WLOG("addr not a multiple of pagesize, not supported\n");
return -1;
}
- /* write each page. above WRITE_BLOCK_SIZE fails? */
- for (off = 0; off < len; off += WRITE_BLOCK_SIZE) {
- /* adjust last write size */
- size_t size = WRITE_BLOCK_SIZE;
- if ((off + WRITE_BLOCK_SIZE) > len)
- size = len - off;
-
- if (run_flash_loader(sl, &fl, addr + off, base + off, size) == -1) {
- fprintf(stderr, "run_flash_loader(0x%zx) == -1\n", addr + off);
+ // Make sure we've loaded the context with the chip details
+ stlink_core_id(sl);
+ /* erase each page */
+ int page_count = 0;
+ for (off = 0; off < len; off += sl->flash_pgsz) {
+ /* addr must be an addr inside the page */
+ if (stlink_erase_flash_page(sl, addr + off) == -1) {
+ WLOG("Failed to erase_flash_page(%#zx) == -1\n", addr + off);
+ return -1;
+ }
+ page_count++;
+ }
+ ILOG("Finished erasing %d pages of %d (%#x) bytes\n",
+ page_count, sl->flash_pgsz, sl->flash_pgsz);
+
+ if (sl->core_id == STM32L_CORE_ID)
+ {
+ /* use fast word write. todo: half page. */
+
+ uint32_t val;
+
+#if 0 /* todo: check write operation */
+
+ uint32_t nwrites = sl->flash_pgsz;
+
+ redo_write:
+
+#endif /* todo: check write operation */
+
+ /* disable pecr protection */
+ write_uint32(sl->q_buf, 0x89abcdef);
+ stlink_write_mem32(sl, STM32L_FLASH_PEKEYR, sizeof(uint32_t));
+ write_uint32(sl->q_buf, 0x02030405);
+ stlink_write_mem32(sl, STM32L_FLASH_PEKEYR, sizeof(uint32_t));
+
+ /* check pecr.pelock is cleared */
+ stlink_read_mem32(sl, STM32L_FLASH_PECR, sizeof(uint32_t));
+ val = read_uint32(sl->q_buf, 0);
+ if (val & (1 << 0))
+ {
+ fprintf(stderr, "pecr.pelock not clear\n");
+ return -1;
+ }
+
+ /* unlock program memory */
+ write_uint32(sl->q_buf, 0x8c9daebf);
+ stlink_write_mem32(sl, STM32L_FLASH_PRGKEYR, sizeof(uint32_t));
+ write_uint32(sl->q_buf, 0x13141516);
+ stlink_write_mem32(sl, STM32L_FLASH_PRGKEYR, sizeof(uint32_t));
+
+ /* check pecr.prglock is cleared */
+ stlink_read_mem32(sl, STM32L_FLASH_PECR, sizeof(uint32_t));
+ val = read_uint32(sl->q_buf, 0);
+ if (val & (1 << 1))
+ {
+ fprintf(stderr, "pecr.prglock not clear\n");
+ return -1;
+ }
+
+ /* write a word in program memory */
+ for (off = 0; off < len; off += sizeof(uint32_t))
+ {
+ if (sl->verbose >= 1)
+ {
+ if ((off & (sl->flash_pgsz - 1)) == 0)
+ {
+ /* show progress. writing procedure is slow
+ and previous errors are misleading */
+ const uint32_t pgnum = off / sl->flash_pgsz;
+ const uint32_t pgcount = len / sl->flash_pgsz;
+ fprintf(stdout, "%u pages written out of %u\n", pgnum, pgcount);
+ }
+ }
+
+ memcpy(sl->q_buf, (const void*)(base + off), sizeof(uint32_t));
+ stlink_write_mem32(sl, addr + off, sizeof(uint32_t));
+
+ /* wait for sr.busy to be cleared */
+ while (1)
+ {
+ stlink_read_mem32(sl, STM32L_FLASH_SR, sizeof(uint32_t));
+ if ((read_uint32(sl->q_buf, 0) & (1 << 0)) == 0) break ;
+ }
+
+#if 0 /* todo: check redo write operation */
+
+ /* check written bytes. todo: should be on a per page basis. */
+ stlink_read_mem32(sl, addr + off, sizeof(uint32_t));
+ if (memcmp(sl->q_buf, base + off, sizeof(uint32_t)))
+ {
+ /* re erase the page and redo the write operation */
+ uint32_t page;
+ uint32_t val;
+
+ /* fail if successive write count too low */
+ if (nwrites < sl->flash_pgsz) {
+ fprintf(stderr, "writes operation failure count too high, aborting\n");
+ return -1;
+ }
+
+ nwrites = 0;
+
+ /* assume addr aligned */
+ if (off % sl->flash_pgsz) off &= ~(sl->flash_pgsz - 1);
+ page = addr + off;
+
+ fprintf(stderr, "invalid write @%x(%x): %x != %x. retrying.\n",
+ page, addr + off, read_uint32(base + off, 0), read_uint32(sl->q_buf, 0));
+
+ /* reset lock bits */
+ stlink_read_mem32(sl, STM32L_FLASH_PECR, sizeof(uint32_t));
+ val = read_uint32(sl->q_buf, 0) | (1 << 0) | (1 << 1) | (1 << 2);
+ write_uint32(sl->q_buf, val);
+ stlink_write_mem32(sl, STM32L_FLASH_PECR, sizeof(uint32_t));
+
+ stlink_erase_flash_page(sl, page);
+
+ goto redo_write;
+ }
+
+ /* increment successive writes counter */
+ ++nwrites;
+
+#endif /* todo: check redo write operation */
+
+ }
+
+ /* reset lock bits */
+ stlink_read_mem32(sl, STM32L_FLASH_PECR, sizeof(uint32_t));
+ val = read_uint32(sl->q_buf, 0) | (1 << 0) | (1 << 1) | (1 << 2);
+ write_uint32(sl->q_buf, val);
+ stlink_write_mem32(sl, STM32L_FLASH_PECR, sizeof(uint32_t));
+ } else if (sl->core_id == STM32VL_CORE_ID) {
+ ILOG("Starting Flash write for VL core id\n");
+ /* flash loader initialization */
+ if (init_flash_loader(sl, &fl) == -1) {
+ WLOG("init_flash_loader() == -1\n");
return -1;
}
+
+ /* write each page. above WRITE_BLOCK_SIZE fails? */
+#define WRITE_BLOCK_SIZE 0x40
+ int write_block_count = 0;
+ for (off = 0; off < len; off += WRITE_BLOCK_SIZE) {
+ ILOG("Writing flash block %d of size %d (%#x)\n", write_block_count,
+ WRITE_BLOCK_SIZE, WRITE_BLOCK_SIZE);
+ /* adjust last write size */
+ size_t size = WRITE_BLOCK_SIZE;
+ if ((off + WRITE_BLOCK_SIZE) > len) size = len - off;
+
+ /* unlock and set programming mode */
+ unlock_flash_if(sl);
+ set_flash_cr_pg(sl);
+ //DLOG("Finished setting flash cr pg, running loader!\n");
+ if (run_flash_loader(sl, &fl, addr + off, base + off, size) == -1) {
+ WLOG("run_flash_loader(%#zx) failed! == -1\n", addr + off);
+ return -1;
+ }
+ lock_flash(sl);
+ DLOG("Finished writing block %d\n", write_block_count++);
+ }
+ } else {
+ WLOG("unknown coreid, not sure how to write: %x\n", sl->core_id);
+ return -1;
}
+ ILOG("Starting verification of write complete\n");
for (off = 0; off < len; off += sl->flash_pgsz) {
size_t aligned_size;
if (memcmp(sl->q_buf, base + off, cmp_size))
return -1;
}
-
+ ILOG("Flash written and verified! jolly good!\n");
return 0;
}
+/**
+ * Write the given binary file into flash at address "addr"
+ * @param sl
+ * @param path readable file path, should be binary image
+ * @param addr where to start writing
+ * @return 0 on success, -ve on failure.
+ */
int stlink_fwrite_flash(stlink_t *sl, const char* path, stm32_addr_t addr) {
/* write the file in flash at addr */
-
- int error = -1;
- size_t off;
+ int err;
mapped_file_t mf = MAPPED_FILE_INITIALIZER;
- flash_loader_t fl;
-
if (map_file(&mf, path) == -1) {
- fprintf(stderr, "map_file() == -1\n");
+ WLOG("map_file() == -1\n");
return -1;
}
+ err = stlink_write_flash(sl, addr, mf.base, mf.len);
+ unmap_file(&mf);
+ return err;
+}
- /* check addr range is inside the flash */
- if (addr < sl->flash_base) {
- fprintf(stderr, "addr too low\n");
- goto on_error;
- } else if ((addr + mf.len) < addr) {
- fprintf(stderr, "addr overruns\n");
- goto on_error;
- } else if ((addr + mf.len) > (sl->flash_base + sl->flash_size)) {
- fprintf(stderr, "addr too high\n");
- goto on_error;
- } else if ((addr & 1) || (mf.len & 1)) {
- /* todo */
- fprintf(stderr, "unaligned addr or size\n");
- goto on_error;
- }
-
- /* erase each page. todo: mass erase faster? */
- for (off = 0; off < mf.len; off += sl->flash_pgsz) {
- /* addr must be an addr inside the page */
- if (stlink_erase_flash_page(sl, addr + off) == -1) {
- fprintf(stderr, "erase_flash_page(0x%zx) == -1\n", addr + off);
- goto on_error;
- }
- }
+int run_flash_loader(stlink_t *sl, flash_loader_t* fl, stm32_addr_t target, const uint8_t* buf, size_t size) {
- /* flash loader initialization */
- if (init_flash_loader(sl, &fl) == -1) {
- fprintf(stderr, "init_flash_loader() == -1\n");
- goto on_error;
+ reg rr;
+ DLOG("Running flash loader, write address:%#x, size: %zd\n", target, size);
+ // FIXME This can never return -1
+ if (write_buffer_to_sram(sl, fl, buf, size) == -1) {
+ // IMPOSSIBLE!
+ WLOG("write_buffer_to_sram() == -1\n");
+ return -1;
}
- /* write each page. above WRITE_BLOCK_SIZE fails? */
-#define WRITE_BLOCK_SIZE 0x40
- for (off = 0; off < mf.len; off += WRITE_BLOCK_SIZE) {
- /* adjust last write size */
- size_t size = WRITE_BLOCK_SIZE;
- if ((off + WRITE_BLOCK_SIZE) > mf.len)
- size = mf.len - off;
+ if (sl->core_id == STM32L_CORE_ID) {
- if (run_flash_loader(sl, &fl, addr + off, mf.base + off, size) == -1) {
- fprintf(stderr, "run_flash_loader(0x%zx) == -1\n", addr + off);
- goto on_error;
- }
- }
+ size_t count = size / sizeof(uint32_t);
+ if (size % sizeof(uint32_t)) ++count;
- /* check the file ha been written */
- if (check_file(sl, &mf, addr) == -1) {
- fprintf(stderr, "check_file() == -1\n");
- goto on_error;
- }
+ /* setup core */
+ stlink_write_reg(sl, target, 0); /* target */
+ stlink_write_reg(sl, fl->buf_addr, 1); /* source */
+ stlink_write_reg(sl, count, 2); /* count (32 bits words) */
+ stlink_write_reg(sl, 0, 3); /* output count */
+ stlink_write_reg(sl, fl->loader_addr, 15); /* pc register */
- /* success */
- error = 0;
+ } else if (sl->core_id == STM32VL_CORE_ID) {
-on_error:
- unmap_file(&mf);
- return error;
-}
+ size_t count = size / sizeof(uint16_t);
+ if (size % sizeof(uint16_t)) ++count;
-int run_flash_loader(stlink_t *sl, flash_loader_t* fl, stm32_addr_t target, const uint8_t* buf, size_t size) {
- const size_t count = size / sizeof (uint16_t);
+ /* setup core */
+ stlink_write_reg(sl, fl->buf_addr, 0); /* source */
+ stlink_write_reg(sl, target, 1); /* target */
+ stlink_write_reg(sl, count, 2); /* count (16 bits half words) */
+ stlink_write_reg(sl, 0, 3); /* flash bank 0 (input) */
+ stlink_write_reg(sl, fl->loader_addr, 15); /* pc register */
- if (write_buffer_to_sram(sl, fl, buf, size) == -1) {
- fprintf(stderr, "write_buffer_to_sram() == -1\n");
- return -1;
+ } else {
+ fprintf(stderr, "unknown coreid: %x\n", sl->core_id);
+ return -1;
}
- /* setup core */
- stlink_write_reg(sl, fl->buf_addr, 0); /* source */
- stlink_write_reg(sl, target, 1); /* target */
- stlink_write_reg(sl, count, 2); /* count (16 bits half words) */
- stlink_write_reg(sl, 0, 3); /* flash bank 0 (input) */
- stlink_write_reg(sl, fl->loader_addr, 15); /* pc register */
-
- /* unlock and set programming mode */
- unlock_flash_if(sl);
- set_flash_cr_pg(sl);
-
/* run loader */
stlink_run(sl);
- while (is_core_halted(sl) == 0)
- ;
+ /* wait until done (reaches breakpoint) */
+ while (is_core_halted(sl) == 0) ;
- lock_flash(sl);
+ /* check written byte count */
+ if (sl->core_id == STM32L_CORE_ID) {
- /* not all bytes have been written */
- reg rr;
- stlink_read_reg(sl, 2, &rr);
- if (rr.r[2] != 0) {
+ size_t count = size / sizeof(uint32_t);
+ if (size % sizeof(uint32_t)) ++count;
+
+ stlink_read_reg(sl, 3, &rr);
+ if (rr.r[3] != count) {
+ fprintf(stderr, "write error, count == %u\n", rr.r[3]);
+ return -1;
+ }
+
+ } else if (sl->core_id == STM32VL_CORE_ID) {
+
+ stlink_read_reg(sl, 2, &rr);
+ if (rr.r[2] != 0) {
fprintf(stderr, "write error, count == %u\n", rr.r[2]);
return -1;
+ }
+
+ } else {
+
+ fprintf(stderr, "unknown coreid: %x\n", sl->core_id);
+ return -1;
+
}
return 0;
-}
\ No newline at end of file
+}