fd_set read_fds;
gdb_connection_t *gdb_con = connection->priv;
int t;
- if (got_data==NULL)
+ if (got_data == NULL)
got_data=&t;
- *got_data=0;
+ *got_data = 0;
- if (gdb_con->buf_cnt>0)
+ if (gdb_con->buf_cnt > 0)
{
*got_data = 1;
return ERROR_OK;
/* This can typically be because a "monitor" command took too long
* before printing any progress messages
*/
- if (timeout_s>0)
+ if (timeout_s > 0)
{
return ERROR_GDB_TIMEOUT;
} else
return ERROR_OK;
}
}
- *got_data=FD_ISSET(connection->fd, &read_fds) != 0;
+ *got_data = FD_ISSET(connection->fd, &read_fds) != 0;
return ERROR_OK;
}
int gdb_get_char(connection_t *connection, int* next_char)
{
gdb_connection_t *gdb_con = connection->priv;
- int retval=ERROR_OK;
+ int retval = ERROR_OK;
#ifdef _DEBUG_GDB_IO_
char *debug_buffer;
int gotdata;
for (;;)
{
- if ((retval=check_pending(connection, 0, &gotdata)) != ERROR_OK)
+ if ((retval = check_pending(connection, 0, &gotdata)) != ERROR_OK)
return retval;
if (!gotdata)
break;
if ((retval = gdb_get_char(connection, &reply)) != ERROR_OK)
return retval;
- if ( reply == '$' ){
+ if (reply == '$' ){
/* fix a problem with some IAR tools */
- gdb_putback_char( connection, reply );
+ gdb_putback_char(connection, reply );
LOG_DEBUG("Unexpected start of new packet");
break;
}
if ((size_t)len + 4 <= sizeof(local_buffer))
{
/* performance gain on smaller packets by only a single call to gdb_write() */
- memcpy(local_buffer+1, buffer, len++);
+ memcpy(local_buffer + 1, buffer, len++);
local_buffer[len++] = '#';
local_buffer[len++] = DIGITS[(my_checksum >> 4) & 0xf];
local_buffer[len++] = DIGITS[my_checksum & 0xf];
{
return retval;
}
- if ((retval = gdb_write(connection, local_buffer+1, 3)) != ERROR_OK)
+ if ((retval = gdb_write(connection, local_buffer + 1, 3)) != ERROR_OK)
{
return retval;
}
log_remove_callback(gdb_log_callback, connection);
LOG_WARNING("negative reply, retrying");
}
- else if ( reply == '$' ){
+ else if (reply == '$' ){
LOG_ERROR("GDB missing ack(1) - assumed good");
- gdb_putback_char( connection, reply );
+ gdb_putback_char(connection, reply );
return ERROR_OK;
} else {
LOG_ERROR("unknown character(1) 0x%2.2x in reply, dropping connection", reply);
- gdb_con->closed=1;
+ gdb_con->closed = 1;
return ERROR_SERVER_REMOTE_CLOSED;
}
}
- else if ( reply == '$' ){
+ else if (reply == '$' ){
LOG_ERROR("GDB missing ack(2) - assumed good");
- gdb_putback_char( connection, reply );
+ gdb_putback_char(connection, reply );
return ERROR_OK;
}
else
{
LOG_ERROR("unknown character(2) 0x%2.2x in reply, dropping connection", reply);
- gdb_con->closed=1;
+ gdb_con->closed = 1;
return ERROR_SERVER_REMOTE_CLOSED;
}
}
* We need to leave at least 2 bytes in the buffer to have
* gdb_get_char() update various bits and bobs correctly.
*/
- if ((gdb_con->buf_cnt > 2) && ((gdb_con->buf_cnt+count) < *len))
+ if ((gdb_con->buf_cnt > 2) && ((gdb_con->buf_cnt + count) < *len))
{
/* The compiler will struggle a bit with constant propagation and
* aliasing, so we help it by showing that these values do not
if (!noack)
{
- *checksum_ok=(my_checksum == strtoul(checksum, NULL, 16));
+ *checksum_ok = (my_checksum == strtoul(checksum, NULL, 16));
}
return ERROR_OK;
*/
if (gdb_con->noack_mode)
{
- if ((retval=fetch_packet(connection, &checksum_ok, 1, len, buffer)) != ERROR_OK)
+ if ((retval = fetch_packet(connection, &checksum_ok, 1, len, buffer)) != ERROR_OK)
return retval;
} else
{
- if ((retval=fetch_packet(connection, &checksum_ok, 0, len, buffer)) != ERROR_OK)
+ if ((retval = fetch_packet(connection, &checksum_ok, 0, len, buffer)) != ERROR_OK)
return retval;
}
return ERROR_GDB_BUFFER_TOO_SMALL;
hex_buffer[0] = 'O';
- for (i=0; i<bin_size; i++)
+ for (i = 0; i < bin_size; i++)
snprintf(hex_buffer + 1 + i*2, 3, "%2.2x", line[i]);
- hex_buffer[bin_size*2+1] = 0;
+ hex_buffer[bin_size*2 + 1] = 0;
int retval = gdb_put_packet(connection, hex_buffer, bin_size*2 + 1);
int retval;
connection_t *connection = priv;
- target_handle_event( target, event );
+ target_handle_event(target, event );
switch (event)
{
case TARGET_EVENT_EARLY_HALTED:
target_call_event_callbacks(target, TARGET_EVENT_GDB_END);
break;
case TARGET_EVENT_GDB_FLASH_ERASE_START:
- target_handle_event( target, TARGET_EVENT_OLD_gdb_program_config );
+ target_handle_event(target, TARGET_EVENT_OLD_gdb_program_config );
if ((retval = jtag_execute_queue()) != ERROR_OK)
{
return retval;
{
int j = gdb_reg_pos(target, i, buf_len);
tstr[i*2] = DIGITS[(buf[j]>>4) & 0xf];
- tstr[i*2+1] = DIGITS[buf[j]&0xf];
+ tstr[i*2 + 1] = DIGITS[buf[j]&0xf];
}
}
{
return c-'0';
}
- c=toupper(c);
+ c = toupper(c);
if (c>='A'&&c<='F')
{
return c-'A'+10;
int i;
for (i = 0; i < str_len; i += 2)
{
- uint8_t t = hextoint(tstr[i])<<4;
- t |= hextoint(tstr[i+1]);
+ uint8_t t = hextoint(tstr[i]) << 4;
+ t |= hextoint(tstr[i + 1]);
int j = gdb_reg_pos(target, i/2, str_len/2);
bin[j] = t;
return ERROR_SERVER_REMOTE_CLOSED;
}
- len = strtoul(separator+1, NULL, 16);
+ len = strtoul(separator + 1, NULL, 16);
buffer = malloc(len);
* gained by involving the user in this problem that hopefully will get resolved
* eventually
*
- * http://sourceware.org/cgi-bin/gnatsweb.pl?cmd=view%20audit-trail&database=gdb&pr=2395
+ * http://sourceware.org/cgi-bin/gnatsweb.pl?cmd = view%20audit-trail&database = gdb&pr = 2395
*
* For now, the default is to fix up things to make current GDB versions work.
* This can be overwritten using the gdb_report_data_abort <'enable'|'disable'> command.
return ERROR_SERVER_REMOTE_CLOSED;
}
- len = strtoul(separator+1, &separator, 16);
+ len = strtoul(separator + 1, &separator, 16);
if (*(separator++) != ':')
{
LOG_DEBUG("addr: 0x%8.8" PRIx32 ", len: 0x%8.8" PRIx32 "", addr, len);
- for (i=0; i<len; i++)
+ for (i = 0; i < len; i++)
{
uint32_t tmp;
sscanf(separator + 2*i, "%2" SCNx32 , &tmp);
return ERROR_SERVER_REMOTE_CLOSED;
}
- len = strtoul(separator+1, &separator, 16);
+ len = strtoul(separator + 1, &separator, 16);
if (*(separator++) != ':')
{
{
int current = 0;
uint32_t address = 0x0;
- int retval=ERROR_OK;
+ int retval = ERROR_OK;
LOG_DEBUG("-");
if (packet[0] == 'c')
{
LOG_DEBUG("continue");
- target_handle_event( target, TARGET_EVENT_OLD_pre_resume );
- retval=target_resume(target, current, address, 0, 0); /* resume at current address, don't handle breakpoints, not debugging */
+ target_handle_event(target, TARGET_EVENT_OLD_pre_resume );
+ retval = target_resume(target, current, address, 0, 0); /* resume at current address, don't handle breakpoints, not debugging */
}
else if (packet[0] == 's')
{
else if (type == 4) /* access watchpoint */
wp_type = WPT_ACCESS;
- if (gdb_breakpoint_override&&((bp_type==BKPT_SOFT)||(bp_type==BKPT_HARD)))
+ if (gdb_breakpoint_override && ((bp_type == BKPT_SOFT)||(bp_type == BKPT_HARD)))
{
- bp_type=gdb_breakpoint_override_type;
+ bp_type = gdb_breakpoint_override_type;
}
if (*separator != ',')
return ERROR_SERVER_REMOTE_CLOSED;
}
- address = strtoul(separator+1, &separator, 16);
+ address = strtoul(separator + 1, &separator, 16);
if (*separator != ',')
{
return ERROR_SERVER_REMOTE_CLOSED;
}
- size = strtoul(separator+1, &separator, 16);
+ size = strtoul(separator + 1, &separator, 16);
switch (type)
{
if (*separator != ',')
return -1;
- *len = strtoul(separator+1, NULL, 16);
+ *len = strtoul(separator + 1, NULL, 16);
return 0;
}
b1=*((flash_bank_t **)a);
b2=*((flash_bank_t **)b);
- if (b1->base==b2->base)
+ if (b1->base == b2->base)
{
return 0;
- } else if (b1->base>b2->base)
+ } else if (b1->base > b2->base)
{
return 1;
} else
char *cmd;
int i;
cmd = malloc((packet_size - 6)/2 + 1);
- for (i=0; i < (packet_size - 6)/2; i++)
+ for (i = 0; i < (packet_size - 6)/2; i++)
{
uint32_t tmp;
sscanf(packet + 6 + 2*i, "%2" SCNx32 , &tmp);
xml_printf(&retval, &buffer, &pos, &size,
"PacketSize=%x;qXfer:memory-map:read%c;qXfer:features:read-;QStartNoAckMode+",
- (GDB_BUFFER_SIZE - 1), ((gdb_use_memory_map == 1)&&(flash_get_bank_count()>0)) ? '+' : '-');
+ (GDB_BUFFER_SIZE - 1), ((gdb_use_memory_map == 1) && (flash_get_bank_count() > 0)) ? '+' : '-');
if (retval != ERROR_OK)
{
return ERROR_OK;
}
- else if (strstr(packet, "qXfer:memory-map:read::")&&(flash_get_bank_count()>0))
+ else if (strstr(packet, "qXfer:memory-map:read::") && (flash_get_bank_count() > 0))
{
/* We get away with only specifying flash here. Regions that are not
* specified are treated as if we provided no memory map(if not we
read/write) by default for GDB.
GDB does not have a concept of non-cacheable read/write memory.
*/
- flash_bank_t **banks=malloc(sizeof(flash_bank_t *)*flash_get_bank_count());
+ flash_bank_t **banks = malloc(sizeof(flash_bank_t *)*flash_get_bank_count());
int i;
- for (i=0; i<flash_get_bank_count(); i++)
+ for (i = 0; i < flash_get_bank_count(); i++)
{
p = get_flash_bank_by_num(i);
if (p == NULL)
qsort(banks, flash_get_bank_count(), sizeof(flash_bank_t *), compare_bank);
- uint32_t ram_start=0;
- for (i=0; i<flash_get_bank_count(); i++)
+ uint32_t ram_start = 0;
+ for (i = 0; i < flash_get_bank_count(); i++)
{
p = banks[i];
- if (ram_start<p->base)
+ if (ram_start < p->base)
{
xml_printf(&retval, &xml, &pos, &size, "<memory type=\"ram\" start=\"0x%x\" length=\"0x%x\"/>\n",
ram_start, p->base-ram_start);
"<property name=\"blocksize\">0x%x</property>\n" \
"</memory>\n", \
p->base, p->size, blocksize);
- ram_start=p->base+p->size;
+ ram_start = p->base + p->size;
}
if (ram_start != 0)
{
}
xml_printf(&retval, &xml, &pos, &size, \
- "l<target version=\"1.0\">\n<architecture>arm</architecture>\n</target>\n");
+ "l < target version=\"1.0\">\n < architecture > arm</architecture>\n</target>\n");
if (retval != ERROR_OK)
{
target_call_event_callbacks(gdb_service->target, TARGET_EVENT_GDB_FLASH_WRITE_START);
result = flash_write(gdb_service->target, gdb_connection->vflash_image, &written, 0);
target_call_event_callbacks(gdb_service->target, TARGET_EVENT_GDB_FLASH_WRITE_END);
- if ( result != ERROR_OK)
+ if (result != ERROR_OK)
{
if (result == ERROR_FLASH_DST_OUT_OF_BANK)
gdb_put_packet(connection, "E.memtype", 9);
int gdb_detach(connection_t *connection, target_t *target)
{
- switch ( detach_mode )
+ switch (detach_mode )
{
case GDB_DETACH_RESUME:
- target_handle_event( target, TARGET_EVENT_OLD_pre_resume );
+ target_handle_event(target, TARGET_EVENT_OLD_pre_resume );
target_resume(target, 1, 0, 1, 0);
break;
{
gdb_service_t *gdb_service = connection->service->priv;
target_t *target = gdb_service->target;
- char *packet=gdb_packet_buffer;
+ char *packet = gdb_packet_buffer;
int packet_size;
int retval;
gdb_connection_t *gdb_con = connection->priv;
/* terminate with zero */
packet[packet_size] = 0;
- if ( LOG_LEVEL_IS( LOG_LVL_DEBUG ) ){
- if ( packet[0] == 'X' ){
+ if (LOG_LEVEL_IS(LOG_LVL_DEBUG ) ){
+ if (packet[0] == 'X' ){
// binary packets spew junk into the debug log stream
char buf[ 50 ];
int x;
- for ( x = 0 ; (x < 49) && (packet[x] != ':') ; x++ ){
+ for (x = 0 ; (x < 49) && (packet[x] != ':') ; x++ ){
buf[x] = packet[x];
}
buf[x] = 0;
gdb_con->frontend_state = TARGET_RUNNING;
log_add_callback(gdb_log_callback, connection);
target_call_event_callbacks(target, TARGET_EVENT_GDB_START);
- int retval=gdb_step_continue_packet(connection, target, packet, packet_size);
+ int retval = gdb_step_continue_packet(connection, target, packet, packet_size);
if (retval != ERROR_OK)
{
/* we'll never receive a halted condition... issue a false one.. */
if (argc == 0)
{
- } else if (argc==1)
+ } else if (argc == 1)
{
gdb_breakpoint_override = 1;
- if (strcmp(args[0], "hard")==0)
+ if (strcmp(args[0], "hard") == 0)
{
- gdb_breakpoint_override_type=BKPT_HARD;
- } else if (strcmp(args[0], "soft")==0)
+ gdb_breakpoint_override_type = BKPT_HARD;
+ } else if (strcmp(args[0], "soft") == 0)
{
- gdb_breakpoint_override_type=BKPT_SOFT;
+ gdb_breakpoint_override_type = BKPT_SOFT;
} else if (strcmp(args[0], "disable") == 0)
{
gdb_breakpoint_override = 0;
}
if (gdb_breakpoint_override)
{
- LOG_USER("force %s breakpoints", (gdb_breakpoint_override_type==BKPT_HARD)?"hard":"soft");
+ LOG_USER("force %s breakpoints", (gdb_breakpoint_override_type == BKPT_HARD)?"hard":"soft");
} else
{
LOG_USER("breakpoint type is not overriden");
projects / fw / openocd / blobdiff