PIC port now supports object files. Applied patch from Craig Franklin that started...

[fw/sdcc] / src / regression / Makefile

diff --git a/src/regression/Makefile b/src/regression/Makefile
index a0d97077b073a7411c8d8220ec68b62a2c432512..50df1b67b2262a16dace8edeaab5fc63c9165108 100644 (file)
--- a/src/regression/Makefile
+++ b/src/regression/Makefile
@@ -1,5 +1,10 @@
 # Regression testing Makefile for Pic Port of SDCC
 #
+# note that this regression suite was started before
+# the one in sdcc/regression. The regression suite in
+# sdcc/regression is better suited for testing mature
+# ports.
+#
 # GPL'd
 #
 # T. Scott Dattalo scott@dattalo.com
@@ -9,7 +14,7 @@
 # is unique to the PIC (as in Microchip PIC) port.
 # As such it requires the following software:
 #
-#  gpasm version 0.8.10 (or greater)
+#  gpasm version 0.11.1 (or greater)
 #  gpsim version 0.20.7 (or greater)
 #
 # Usage:
@@ -37,10 +42,14 @@
 # make cleancod
 # make cleanasm
 # make cleanstc
-#  - removes either the .stc, .asm, or .cod files
+# make cleano
+#  - removes either the .stc, .asm, .cod or .o files
 
 
 CC = ../../bin/sdcc
+LINKER = gplink
+TARGETPIC = 16f873
+CFLAGS = -mpic14 -c -pp$(TARGETPIC)
 
 .SUFFIXES: .asm .c .cod .stc
 
@@ -56,35 +65,67 @@ SIMULATE = simulate
 # List the C files to be test here:
 SRC = b.c \
        add.c \
+       add2.c \
+       add3.c \
+       and1.c \
+       and2.c \
        bool1.c \
+       bool2.c \
+       bool3.c \
        call1.c \
        compare.c \
        compare2.c \
        compare3.c \
+       compare4.c \
+       compare5.c \
+       compare6.c \
        for.c \
+       nestfor.c \
+       or1.c \
+       rotate1.c \
+       rotate2.c \
+       rotate3.c \
+       rotate4.c \
+       rotate5.c \
        struct1.c \
        sub.c \
-       while.c
+       sub2.c \
+       switch1.c \
+       while.c \
+       xor.c \
+       ptrfunc.c
+
+#      mul1.c \
 
 COD := $(patsubst %.c, %.cod, $(SRC))
 ASM := $(patsubst %.c, %.asm, $(SRC))
+O := $(patsubst %.c, %.o, $(SRC))
 STC := $(patsubst %.c, %.stc, $(SRC))
+HEX := $(patsubst %.c, %.hex, $(SRC))
+LST := $(patsubst %.c, %.lst, $(SRC))
+MAP := $(patsubst %.c, %.map, $(SRC))
 
 all:   test
 
 
 # The asm files are generated by sdcc
-.c.asm:
-       $(CC) -mpic14 -c $*.c
+.c.o:
+       $(CC) $(CFLAGS)  $*.c
 
 # The .cod files are generated by gpasm
 # these get loaded by gpsim.
-.asm.cod:
-       gpasm -c $*.asm
+.o.cod:
+       $(LINKER) --map -c -s $(TARGETPIC).lkr -o $*.o $*.o
+
+#      gpasm $*.asm
+
+#      gpasm -c -I $(HEADER) $*.asm
+
 
 # The .stc files are script files for gpsim
 .cod.stc:
        ./$(CREATESTC) $*.cod $*.stc
+       ./$(SIMULATE) $*.stc $(LOGFILE)
 
 # this will also make .stc files
 #%.stc : %.cod
@@ -94,18 +135,13 @@ all:       test
 
 cod : $(COD)
 
+o : $(O)
 
 asm : $(ASM)
 
 stc : $(STC)
 
 test:  $(STC)
-       if [ -n "$(STC)" ]; then \
-       stcfiles="$(STC)" ; \
-       for f in $$stcfiles ; do \
-         ./$(SIMULATE) $$f $(LOGFILE); \
-       done ; \
-       fi
        echo "Done - Results are in $(LOGFILE)"
 
 cleancod:
@@ -114,6 +150,12 @@ cleancod:
          if [ -f $$f ]; then rm $$f; fi \
        done ; \
 
+cleano:
+       files="$(O)" ; \
+       for f in $$files ; do \
+         if [ -f $$f ]; then rm $$f; fi \
+       done ; \
+
 cleanasm:
        files="$(ASM)" ; \
        for f in $$files ; do \
@@ -126,5 +168,17 @@ cleanstc:
          if [ -f $$f ]; then rm $$f; fi \
        done ; \
 
-clean: cleancod cleanasm cleanstc
+cleanhex:
+       files="$(HEX)" ; \
+       for f in $$files ; do \
+         if [ -f $$f ]; then rm $$f; fi \
+       done ; \
+
+cleanlst:
+       files="$(LST)" ; \
+       for f in $$files ; do \
+         if [ -f $$f ]; then rm $$f; fi \
+       done ; \
+
+clean: cleancod cleanasm cleanstc cleano cleanhex cleanlst
        if [ -f "$(LOGFILE)" ]; then rm $(LOGFILE); fi