#ifndef __PCODE_H__
#define __PCODE_H__
+/***********************************************************************
+ * debug stuff
+ *
+ * The DFPRINTF macro will call fprintf if PCODE_DEBUG is defined.
+ * The macro is used like:
+ *
+ * DPRINTF(("%s #%d\n","test", 1));
+ *
+ * The double parenthesis (()) are necessary
+ *
+ ***********************************************************************/
+//#define PCODE_DEBUG
+
+#ifdef PCODE_DEBUG
+#define DFPRINTF(args) (fprintf args)
+#else
+#define DFPRINTF(args) ;
+#endif
+
+
/***********************************************************************
* PIC status bits - this will move into device dependent headers
***********************************************************************/
#define PIC_C_BIT 0
#define PIC_DC_BIT 1
#define PIC_Z_BIT 2
+#define PIC_RP0_BIT 5 /* Register Bank select bits RP1:0 : */
+#define PIC_RP1_BIT 6 /* 00 - bank 0, 01 - bank 1, 10 - bank 2, 11 - bank 3 */
+#define PIC_IRP_BIT 7 /* Indirect register page select */
+
+/***********************************************************************
+ * PIC INTCON bits - this will move into device dependent headers
+ ***********************************************************************/
+#define PIC_RBIF_BIT 0 /* Port B level has changed flag */
+#define PIC_INTF_BIT 1 /* Port B bit 0 interrupt on edge flag */
+#define PIC_T0IF_BIT 2 /* TMR0 has overflowed flag */
+#define PIC_RBIE_BIT 3 /* Port B level has changed - Interrupt Enable */
+#define PIC_INTE_BIT 4 /* Port B bit 0 interrupt on edge - Int Enable */
+#define PIC_T0IE_BIT 5 /* TMR0 overflow Interrupt Enable */
+#define PIC_PIE_BIT 6 /* Peripheral Interrupt Enable */
+#define PIC_GIE_BIT 7 /* Global Interrupt Enable */
/***********************************************************************
* Operand types
PO_STATUS, // The 'STATUS' register
PO_FSR, // The "file select register" (in 18c it's one of three)
PO_INDF, // The Indirect register
+ PO_INTCON, // Interrupt Control register
PO_GPR_REGISTER, // A general purpose register
+ PO_GPR_BIT, // A bit of a general purpose register
PO_GPR_TEMP, // A general purpose temporary register
PO_SFR_REGISTER, // A special function register (e.g. PORTA)
+ PO_PCL, // Program counter Low register
+ PO_PCLATH, // Program counter Latch high register
PO_LITERAL, // A constant
PO_IMMEDIATE, // (8051 legacy)
PO_DIR, // Direct memory (8051 legacy)
} PIC_OPTYPE;
-/*************************************************
- * pCode conditions:
- *
- * The "conditions" are bit-mapped flags that describe
- * input and/or output conditions that are affected by
- * the instructions. For example:
- *
- * MOVF SOME_REG,W
- *
- * This instruction depends upon 'SOME_REG'. Consequently
- * it has the input condition PCC_REGISTER set to true.
- *
- * In addition, this instruction affects the Z bit in the
- * status register and affects W. Thus the output conditions
- * are the logical or:
- * PCC_ZERO_BIT | PCC_W
- *
- * The conditions are intialized when the pCode for an
- * instruction is created. They're subsequently used
- * by the pCode optimizer determine state information
- * in the program flow.
- *************************************************/
-
-#define PCC_NONE 0
-#define PCC_REGISTER (1<<0)
-#define PCC_C (1<<1)
-#define PCC_Z (1<<2)
-#define PCC_DC (1<<3)
-#define PCC_W (1<<4)
-#define PCC_EXAMINE_PCOP (1<<5)
-
/***********************************************************************
*
* PIC_OPCODE
POC_BTFSS,
POC_CALL,
POC_COMF,
+ POC_COMFW,
POC_CLRF,
POC_CLRW,
POC_DECF,
POC_MOVFW,
POC_MOVLW,
POC_MOVWF,
- POC_NEGF,
+ POC_NOP,
POC_RETLW,
POC_RETURN,
+ POC_RETFIE,
+ POC_RLF,
+ POC_RLFW,
+ POC_RRF,
+ POC_RRFW,
POC_SUBLW,
POC_SUBWF,
POC_SUBFW,
+ POC_SWAPF,
+ POC_SWAPFW,
POC_TRIS,
POC_XORLW,
POC_XORWF,
typedef enum
{
- PC_COMMENT=0, // pCode is a comment
- PC_OPCODE, // PORT dependent opcode
- PC_LABEL, // assembly label
- PC_FUNCTION, // Function start or end
- PC_WILD // wildcard - an opcode place holder
+ PC_COMMENT=0, /* pCode is a comment */
+ PC_INLINE, /* user's inline code */
+ PC_OPCODE, /* PORT dependent opcode */
+ PC_LABEL, /* assembly label */
+ PC_FLOW, /* flow analysis */
+ PC_FUNCTION, /* Function start or end */
+ PC_WILD, /* wildcard - an opcode place holder used
+ * in the pCode peep hole optimizer */
+ PC_CSOURCE /* C-Source Line */
} PC_TYPE;
/************************************************/
/*************** Structures ********************/
/************************************************/
struct pCode;
+struct pCodeWildBlock;
/*************************************************
pBranch
char *name;
} pCodeOp;
-
+#if 0
typedef struct pCodeOpBit
{
pCodeOp pcop;
unsigned int inBitSpace: 1; /* True if in bit space, else
just a bit of a register */
} pCodeOpBit;
-
+#endif
typedef struct pCodeOpLit
{
pCodeOp pcop;
int lit;
} pCodeOpLit;
+typedef struct pCodeOpImmd
+{
+ pCodeOp pcop;
+ int offset; /* low,med, or high byte of immediat value */
+ int index; /* add this to the immediate value */
+ unsigned _const:1; /* is in code space */
+
+} pCodeOpImmd;
+
typedef struct pCodeOpLabel
{
pCodeOp pcop;
pCodeOp pcop; // Can be either GPR or SFR
int rIdx; // Index into the register table
struct regs *r;
+ int instance; // byte # of Multi-byte registers
struct pBlock *pb;
} pCodeOpReg;
+typedef struct pCodeOpRegBit
+{
+ pCodeOpReg pcor; // The Register containing this bit
+ int bit; // 0-7 bit number.
+ PIC_OPTYPE subtype; // The type of this register.
+ unsigned int inBitSpace: 1; /* True if in bit space, else
+ just a bit of a register */
+} pCodeOpRegBit;
+
+
+typedef struct pCodeOpWild
+{
+ pCodeOp pcop;
+
+ struct pCodeWildBlock *pcwb;
+
+ int id; /* index into an array of char *'s that will match
+ * the wild card. The array is in *pcp. */
+ pCodeOp *subtype; /* Pointer to the Operand type into which this wild
+ * card will be expanded */
+ pCodeOp *matched; /* When a wild matches, we'll store a pointer to the
+ * opcode we matched */
+
+} pCodeOpWild;
/*************************************************
int seq; // sequence number
- pBranch *from; // pCodes that execute before this one
- pBranch *to; // pCodes that execute after
- pBranch *label; // pCode instructions that have labels
-
struct pBlock *pb; // The pBlock that contains this pCode.
/* "virtual functions"
* in C++. The subsequent structures that "inherit"
* the pCode structure will initialize these function
* pointers to something useful */
- void (*analyze) (struct pCode *_this);
+ // void (*analyze) (struct pCode *_this);
void (*destruct)(struct pCode *_this);
void (*print) (FILE *of,struct pCode *_this);
} pCodeComment;
+/*************************************************
+ pCodeComment
+**************************************************/
+
+typedef struct pCodeCSource
+{
+
+ pCode pc;
+
+ int line_number;
+ char *line;
+ char *file_name;
+
+} pCodeCSource;
+
+
+/*************************************************
+ pCodeFlow
+
+ The Flow object is used as marker to separate
+ the assembly code into contiguous chunks. In other
+ words, everytime an instruction cause or potentially
+ causes a branch, a Flow object will be inserted into
+ the pCode chain to mark the beginning of the next
+ contiguous chunk.
+**************************************************/
+
+typedef struct pCodeFlow
+{
+
+ pCode pc;
+
+ pCode *end; /* Last pCode in this flow. Note that
+ the first pCode is pc.next */
+
+ set **uses; /* map the pCode instruction inCond and outCond conditions
+ * in this array of set's. The reason we allocate an
+ * array of pointers instead of declaring each type of
+ * usage is because there are port dependent usage definitions */
+ int nuses; /* number of uses sets */
+
+ set *from; /* flow blocks that can send control to this flow block */
+ set *to; /* flow blocks to which this one can send control */
+
+ int inCond; /* Input conditions - stuff assumed defined at entry */
+ int outCond; /* Output conditions - stuff modified by flow block */
+
+} pCodeFlow;
+
/*************************************************
pCodeInstruction
char const * const mnemonic; // Pointer to mnemonic string
- pCodeOp *pcop; // Operand
+ pBranch *from; // pCodes that execute before this one
+ pBranch *to; // pCodes that execute after
+ pBranch *label; // pCode instructions that have labels
+
+ pCodeOp *pcop; /* Operand, if this instruction has one */
+ pCodeFlow *pcflow; /* flow block to which this instruction belongs */
+ pCodeCSource *cline; /* C Source from which this instruction was derived */
- unsigned int num_ops;
- unsigned int dest: 1; // If destination is W or F, then 1==F
- unsigned int bit_inst: 1;
+ unsigned int num_ops; /* Number of operands (0,1,2 for mid range pics) */
+ unsigned int isModReg: 1; /* If destination is W or F, then 1==F */
+ unsigned int isBitInst: 1; /* e.g. BCF */
+ unsigned int isBranch: 1; /* True if this is a branching instruction */
+ unsigned int isSkip: 1; /* True if this is a skip instruction */
+ PIC_OPCODE inverted_op; /* Opcode of instruction that's the opposite of this one */
unsigned int inCond; // Input conditions for this instruction
unsigned int outCond; // Output conditions for this instruction
start and the name is contained
here */
+ pBranch *from; // pCodes that execute before this one
+ pBranch *to; // pCodes that execute after
+ pBranch *label; // pCode instructions that have labels
+
+ int ncalled; /* Number of times function is called */
+
} pCodeFunction;
typedef struct pCodeWild
{
- pCode pc;
+ pCodeInstruction pci;
int id; /* Index into the wild card array of a peepBlock
* - this wild card will get expanded into that pCode
* that is stored at this index */
+ /* Conditions on wild pcode instruction */
+ int mustBeBitSkipInst:1;
+ int mustNotBeBitSkipInst:1;
+ int invertBitSkipInst:1;
pCodeOp *operand; // Optional operand
pCodeOp *label; // Optional label
set *function_entries; /* dll of functions in this pblock */
set *function_exits;
set *function_calls;
- set *registers;
+ set *tregisters;
unsigned visited:1; /* set true if traversed in call tree */
+/*************************************************
+ pCodeWildBlock
+
+ The pCodeWildBlock object keeps track of the wild
+ variables, operands, and opcodes that exist in
+ a pBlock.
+**************************************************/
+typedef struct pCodeWildBlock {
+ pBlock *pb;
+ struct pCodePeep *pcp; // pointer back to ... I don't like this...
+
+ int nvars; // Number of wildcard registers in target.
+ char **vars; // array of pointers to them
+
+ int nops; // Number of wildcard operands in target.
+ pCodeOp **wildpCodeOps; // array of pointers to the pCodeOp's.
+
+ int nwildpCodes; // Number of wildcard pCodes in target/replace
+ pCode **wildpCodes; // array of pointers to the pCode's.
+
+} pCodeWildBlock;
+
/*************************************************
pCodePeep
pCode chain.
**************************************************/
typedef struct pCodePeep {
+ pCodeWildBlock target; // code we'd like to optimize
+ pCodeWildBlock replace; // and this is what we'll optimize it with.
- pBlock *target; // code we'd like to optimize
- pBlock *replace; // and this is what we'll optimize it with.
+ //pBlock *target;
+ //pBlock replace; // and this is what we'll optimize it with.
- int nvars; // Number of wildcard registers in target.
- char **vars; // array of pointers to them
- int nwildpCodes; // Number of wildcard pCodes in target/replace
- pCode **wildpCodes; // array of pointers to the pCodeOp's.
/* (Note: a wildcard register is a place holder. Any register
} pCodePeep;
-typedef struct pCodeOpWild
-{
- pCodeOp pcop;
- //PIC_OPTYPE subtype; Wild get's expanded to this by the optimizer
- pCodePeep *pcp; // pointer to the parent peep block
- int id; /* index into an array of char *'s that will match
- * the wild card. The array is in *pcp. */
- pCodeOp *subtype; /* Pointer to the Operand type into which this wild
- * card will be expanded */
- pCodeOp *matched; /* When a wild matches, we'll store a pointer to the
- * opcode we matched */
+/*************************************************
+
+ pCode peep command definitions
+
+ Here are some special commands that control the
+way the peep hole optimizer behaves
+
+**************************************************/
+
+enum peepCommandTypes{
+ NOTBITSKIP = 0,
+ BITSKIP,
+ INVERTBITSKIP,
+ _LAST_PEEP_COMMAND_
+};
+
+/*************************************************
+ peepCommand structure stores the peep commands.
+
+**************************************************/
+
+typedef struct peepCommand {
+ int id;
+ char *cmd;
+} peepCommand;
-} pCodeOpWild;
/*************************************************
pCode Macros
#define PCI(x) ((pCodeInstruction *)(x))
#define PCL(x) ((pCodeLabel *)(x))
#define PCF(x) ((pCodeFunction *)(x))
+#define PCFL(x) ((pCodeFlow *)(x))
#define PCW(x) ((pCodeWild *)(x))
+#define PCCS(x) ((pCodeCSource *)(x))
#define PCOP(x) ((pCodeOp *)(x))
-#define PCOB(x) ((pCodeOpBit *)(x))
+//#define PCOB(x) ((pCodeOpBit *)(x))
#define PCOL(x) ((pCodeOpLit *)(x))
+#define PCOI(x) ((pCodeOpImmd *)(x))
#define PCOLAB(x) ((pCodeOpLabel *)(x))
#define PCOR(x) ((pCodeOpReg *)(x))
+#define PCORB(x) ((pCodeOpRegBit *)(x))
#define PCOW(x) ((pCodeOpWild *)(x))
#define PBR(x) ((pBranch *)(x))
+#define PCWB(x) ((pCodeWildBlock *)(x))
+
/*-----------------------------------------------------------------*
* pCode functions.
*-----------------------------------------------------------------*/
pCode *newpCode (PIC_OPCODE op, pCodeOp *pcop); // Create a new pCode given an operand
pCode *newpCodeCharP(char *cP); // Create a new pCode given a char *
+pCode *newpCodeInlineP(char *cP); // Create a new pCode given a char *
pCode *newpCodeFunction(char *g, char *f); // Create a new function
-pCode *newpCodeLabel(int key); // Create a new label given a key
-pCode *newpCodeLabelStr(char *str); // Create a new label given a string
+pCode *newpCodeLabel(char *name,int key); // Create a new label given a key
+pCode *newpCodeCSource(int ln, char *f, char *l); // Create a new symbol line
pBlock *newpCodeChain(memmap *cm,char c, pCode *pc); // Create a new pBlock
void printpBlock(FILE *of, pBlock *pb); // Write a pBlock to a file
void printpCode(FILE *of, pCode *pc); // Write a pCode to a file
void copypCode(FILE *of, char dbName); // Write all pBlocks with dbName to *of
void movepBlock2Head(char dbName); // move pBlocks around
void AnalyzepCode(char dbName);
-void OptimizepCode(char dbName);
+int OptimizepCode(char dbName);
void printCallTree(FILE *of);
void pCodePeepInit(void);
+void pBlockConvert2ISR(pBlock *pb);
-pCodeOp *newpCodeOpLabel(int key);
+pCodeOp *newpCodeOpLabel(char *name, int key);
+pCodeOp *newpCodeOpImmd(char *name, int offset, int index, int code_space);
pCodeOp *newpCodeOpLit(int lit);
-pCodeOp *newpCodeOpBit(char *name, int bit);
+pCodeOp *newpCodeOpBit(char *name, int bit,int inBitSpace);
+pCodeOp *newpCodeOpRegFromStr(char *name);
pCodeOp *newpCodeOp(char *name, PIC_OPTYPE p);
+pCodeOp *pCodeOpCopy(pCodeOp *pcop);
+
extern void pcode_test(void);
/*-----------------------------------------------------------------*
*-----------------------------------------------------------------*/
extern pCodeOpReg pc_status;
+extern pCodeOpReg pc_intcon;
extern pCodeOpReg pc_indf;
extern pCodeOpReg pc_fsr;
+extern pCodeOpReg pc_pcl;
+extern pCodeOpReg pc_pclath;
+extern pCodeOpReg pc_kzero;
+extern pCodeOpReg pc_wsave; /* wsave and ssave are used to save W and the Status */
+extern pCodeOpReg pc_ssave; /* registers during an interrupt */
-//////////////////// DELETE THIS ///////////////////
-/*-----------------------------------------------------------------*/
-/* Allocation macros that replace those in SDCCalloc.h */
-/* Why? I dunno. I ran across a bug with those macros that */
-/* I couldn't fix, but I could work around... */
-/*-----------------------------------------------------------------*/
-# define GC_malloc(x) calloc((x), 1)
-
-#define _ALLOC(x,sz) if (!(x = calloc((sz),1) )) \
- { \
- werror(E_OUT_OF_MEM,__FILE__,(long) sz);\
- exit (1); \
- }
-
-#define _ALLOC_ATOMIC(x,y) if (!((x) = malloc(y))) \
- { \
- werror(E_OUT_OF_MEM,__FILE__,(long) y); \
- exit (1); \
- }
-
#endif // __PCODE_H__
projects / fw / sdcc / blobdiff