*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
#define HAS_TASK 1
#endif
-#ifndef AO_PORT_TYPE
-#define AO_PORT_TYPE uint8_t
-#endif
-
typedef AO_PORT_TYPE ao_port_t;
#if HAS_TASK
#define AO_PANIC_BUFIO 15 /* Mis-using bufio API */
#define AO_PANIC_EXTI 16 /* Mis-using exti API */
#define AO_PANIC_FAST_TIMER 17 /* Mis-using fast timer API */
+#define AO_PANIC_ADC 18 /* Mis-using ADC interface */
+#define AO_PANIC_IRQ 19 /* interrupts not blocked */
#define AO_PANIC_SELF_TEST_CC1120 0x40 | 1 /* Self test failure */
#define AO_PANIC_SELF_TEST_HMC5883 0x40 | 2 /* Self test failure */
#define AO_PANIC_SELF_TEST_MPU6000 0x40 | 3 /* Self test failure */
+#define AO_PANIC_SELF_TEST_MPU9250 0x40 | 3 /* Self test failure */
#define AO_PANIC_SELF_TEST_MS5607 0x40 | 4 /* Self test failure */
/* Stop the operating system, beeping and blinking the reason */
void
ao_clock_init(void);
+#if AO_POWER_MANAGEMENT
+/* Go to low power clock */
+void
+ao_clock_suspend(void);
+
+/* Restart full-speed clock */
+void
+ao_clock_resume(void);
+#endif
+
/*
* ao_mutex.c
*/
ao_put_string(__code char *s);
void
+ao_cmd_readline(void);
+
+char
ao_cmd_lex(void);
void
void
ao_cmd_init(void);
+void
+ao_cmd(void);
+
#if HAS_CMD_FILTER
/*
* Provided by an external module to filter raw command lines
* Given raw data, convert to SI units
*/
+#if HAS_BARO
/* pressure from the sensor to altitude in meters */
-int16_t
-ao_pres_to_altitude(int16_t pres) __reentrant;
+alt_t
+ao_pres_to_altitude(pres_t pres) __reentrant;
-int16_t
-ao_altitude_to_pres(int16_t alt) __reentrant;
+pres_t
+ao_altitude_to_pres(alt_t alt) __reentrant;
int16_t
ao_temp_to_dC(int16_t temp) __reentrant;
+#endif
/*
* ao_convert_pa.c
#include <ao_data.h>
+#if HAS_BARO
alt_t
-ao_pa_to_altitude(int32_t pa);
+ao_pa_to_altitude(pres_t pa);
int32_t
ao_altitude_to_pa(alt_t alt);
+#endif
#if HAS_DBG
#include <ao_dbg.h>
/* Set delay between telemetry reports (0 to disable) */
-#ifdef AO_SEND_ALL_BARO
-#define AO_TELEMETRY_INTERVAL_PAD AO_MS_TO_TICKS(100)
-#define AO_TELEMETRY_INTERVAL_FLIGHT AO_MS_TO_TICKS(100)
-#define AO_TELEMETRY_INTERVAL_RECOVER AO_MS_TO_TICKS(100)
-#else
#define AO_TELEMETRY_INTERVAL_PAD AO_MS_TO_TICKS(1000)
#define AO_TELEMETRY_INTERVAL_FLIGHT AO_MS_TO_TICKS(100)
#define AO_TELEMETRY_INTERVAL_RECOVER AO_MS_TO_TICKS(1000)
-#endif
void
ao_telemetry_reset_interval(void);
void
ao_radio_rdf_abort(void);
+void
+ao_radio_test_on(void);
+
+void
+ao_radio_test_off(void);
+
void
ao_radio_init(void);
extern __xdata union ao_monitor ao_monitor_ring[AO_MONITOR_RING];
#define ao_monitor_ring_next(n) (((n) + 1) & (AO_MONITOR_RING - 1))
+#define ao_monitor_ring_prev(n) (((n) - 1) & (AO_MONITOR_RING - 1))
+extern __xdata uint8_t ao_monitoring_mutex;
extern __data uint8_t ao_monitoring;
extern __data uint8_t ao_monitor_head;
} while(0)
#define ao_fifo_full(f) ((((f).insert + 1) & (AO_FIFO_SIZE-1)) == (f).remove)
+#define ao_fifo_mostly(f) ((((f).insert - (f).remove) & (AO_FIFO_SIZE-1)) >= (AO_FIFO_SIZE * 3 / 4))
+#define ao_fifo_barely(f) ((((f).insert - (f).remove) & (AO_FIFO_SIZE-1)) >= (AO_FIFO_SIZE * 1 / 4))
#define ao_fifo_empty(f) ((f).insert == (f).remove)
#if PACKET_HAS_MASTER || PACKET_HAS_SLAVE
#include <ao_aes.h>
#endif
-/* ao_launch.c */
-
-struct ao_launch_command {
- uint16_t tick;
- uint16_t serial;
- uint8_t cmd;
- uint8_t channel;
- uint16_t unused;
-};
-
-#define AO_LAUNCH_QUERY 1
-
-struct ao_launch_query {
- uint16_t tick;
- uint16_t serial;
- uint8_t channel;
- uint8_t valid;
- uint8_t arm_status;
- uint8_t igniter_status;
-};
-
-#define AO_LAUNCH_ARM 2
-#define AO_LAUNCH_FIRE 3
-
-void
-ao_launch_init(void);
-
/*
* ao_log_single.c
*/