#if BUILD_ECOSBOARD
#include "zy1000_version.h"
-#include <cyg/hal/hal_io.h> // low level i/o
+#include <cyg/hal/hal_io.h> /* low level i/o */
#include <cyg/hal/hal_diag.h>
#ifdef CYGPKG_HAL_NIOS2
#define ZYLIN_KHZ 60000
#endif
-
/* The software needs to check if it's in RCLK mode or not */
-static bool zy1000_rclk = false;
+static bool zy1000_rclk;
static int zy1000_khz(int khz, int *jtag_speed)
{
if (khz == 0)
- {
*jtag_speed = 0;
- }
- else
- {
+ else {
int speed;
/* Round speed up to nearest divisor.
*
* 64000 / 6 = 10666
*
*/
- speed = (ZYLIN_KHZ + (khz -1)) / khz;
- speed = (speed + 1 ) / 2;
+ speed = (ZYLIN_KHZ + (khz - 1)) / khz;
+ speed = (speed + 1) / 2;
speed *= 2;
- if (speed > 8190)
- {
+ if (speed > 8190) {
/* maximum dividend */
speed = 8190;
}
static int zy1000_speed_div(int speed, int *khz)
{
if (speed == 0)
- {
*khz = 0;
- }
else
- {
*khz = ZYLIN_KHZ / speed;
- }
return ERROR_OK;
}
static bool readPowerDropout(void)
{
uint32_t state;
- // sample and clear power dropout
+ /* sample and clear power dropout */
ZY1000_POKE(ZY1000_JTAG_BASE + 0x10, 0x80);
ZY1000_PEEK(ZY1000_JTAG_BASE + 0x10, state);
bool powerDropout;
static bool readSRST(void)
{
uint32_t state;
- // sample and clear SRST sensing
+ /* sample and clear SRST sensing */
ZY1000_POKE(ZY1000_JTAG_BASE + 0x10, 0x00000040);
ZY1000_PEEK(ZY1000_JTAG_BASE + 0x10, state);
bool srstAsserted;
long total = 0;
const char *mode = asserted ? "assert" : "deassert";
- for (;;)
- {
+ for (;; ) {
bool srstAsserted = readSRST();
- if ( (asserted && srstAsserted) || (!asserted && !srstAsserted) )
- {
+ if ((asserted && srstAsserted) || (!asserted && !srstAsserted)) {
if (total > 1)
- {
LOG_USER("SRST took %dms to %s", (int)total, mode);
- }
break;
}
- if (first)
- {
+ if (first) {
first = false;
start = timeval_ms();
}
keep_alive();
- if (total > 5000)
- {
+ if (total > 5000) {
LOG_ERROR("SRST took too long to %s: %dms", mode, (int)total);
break;
}
}
}
-
void zy1000_reset(int trst, int srst)
{
LOG_DEBUG("zy1000 trst=%d, srst=%d", trst, srst);
waitIdle();
if (!srst)
- {
ZY1000_POKE(ZY1000_JTAG_BASE + 0x14, 0x00000001);
- }
- else
- {
+ else {
/* Danger!!! if clk != 0 when in
* idle in TAP_IDLE, reset halt on str912 will fail.
*/
}
if (!trst)
- {
ZY1000_POKE(ZY1000_JTAG_BASE + 0x14, 0x00000002);
- }
- else
- {
+ else {
/* assert reset */
ZY1000_POKE(ZY1000_JTAG_BASE + 0x10, 0x00000002);
}
- if (trst||(srst && (jtag_get_reset_config() & RESET_SRST_PULLS_TRST)))
- {
+ if (trst || (srst && (jtag_get_reset_config() & RESET_SRST_PULLS_TRST))) {
/* we're now in the RESET state until trst is deasserted */
ZY1000_POKE(ZY1000_JTAG_BASE + 0x20, TAP_RESET);
- } else
- {
+ } else {
/* We'll get RCLK failure when we assert TRST, so clear any false positives here */
ZY1000_POKE(ZY1000_JTAG_BASE + 0x14, 0x400);
}
/* wait for srst to float back up */
- if ((!srst && ((jtag_get_reset_config() & RESET_TRST_PULLS_SRST) == 0))||
- (!srst && !trst && (jtag_get_reset_config() & RESET_TRST_PULLS_SRST)))
- {
+ if ((!srst && ((jtag_get_reset_config() & RESET_TRST_PULLS_SRST) == 0)) ||
+ (!srst && !trst && (jtag_get_reset_config() & RESET_TRST_PULLS_SRST)))
waitSRST(false);
- }
}
int zy1000_speed(int speed)
zy1000_rclk = false;
- if (speed == 0)
- {
+ if (speed == 0) {
/*0 means RCLK*/
ZY1000_POKE(ZY1000_JTAG_BASE + 0x10, 0x100);
zy1000_rclk = true;
LOG_DEBUG("jtag_speed using RCLK");
- }
- else
- {
- if (speed > 8190 || speed < 2)
- {
- LOG_USER("valid ZY1000 jtag_speed=[8190,2]. With divisor is %dkHz / even values between 8190-2, i.e. min %dHz, max %dMHz",
- ZYLIN_KHZ, (ZYLIN_KHZ * 1000) / 8190, ZYLIN_KHZ / (2 * 1000));
+ } else {
+ if (speed > 8190 || speed < 2) {
+ LOG_USER(
+ "valid ZY1000 jtag_speed=[8190,2]. With divisor is %dkHz / even values between 8190-2, i.e. min %dHz, max %dMHz",
+ ZYLIN_KHZ,
+ (ZYLIN_KHZ * 1000) / 8190,
+ ZYLIN_KHZ / (2 * 1000));
return ERROR_COMMAND_SYNTAX_ERROR;
}
static bool savePower;
-
static void setPower(bool power)
{
savePower = power;
if (power)
- {
ZY1000_POKE(ZY1000_JTAG_BASE + 0x14, 0x8);
- } else
- {
+ else
ZY1000_POKE(ZY1000_JTAG_BASE + 0x10, 0x8);
- }
}
COMMAND_HANDLER(handle_power_command)
{
- switch (CMD_ARGC)
- {
- case 1: {
- bool enable;
- COMMAND_PARSE_ON_OFF(CMD_ARGV[0], enable);
- setPower(enable);
- // fall through
- }
- case 0:
- LOG_INFO("Target power %s", savePower ? "on" : "off");
- break;
- default:
- return ERROR_COMMAND_SYNTAX_ERROR;
+ switch (CMD_ARGC) {
+ case 1: {
+ bool enable;
+ COMMAND_PARSE_ON_OFF(CMD_ARGV[0], enable);
+ setPower(enable);
+ /* fall through */
+ }
+ case 0:
+ LOG_INFO("Target power %s", savePower ? "on" : "off");
+ break;
+ default:
+ return ERROR_COMMAND_SYNTAX_ERROR;
}
return ERROR_OK;
#if !BUILD_ZY1000_MASTER
static char *tcp_server = "notspecified";
-static int jim_zy1000_server(Jim_Interp *interp, int argc, Jim_Obj *const *argv)
+static int jim_zy1000_server(Jim_Interp *interp, int argc, Jim_Obj * const *argv)
{
if (argc != 2)
return JIM_ERR;
#if BUILD_ECOSBOARD
/* Give TELNET a way to find out what version this is */
-static int jim_zy1000_version(Jim_Interp *interp, int argc, Jim_Obj *const *argv)
+static int jim_zy1000_version(Jim_Interp *interp, int argc, Jim_Obj * const *argv)
{
if ((argc < 1) || (argc > 3))
return JIM_ERR;
const char *version_str = NULL;
if (argc == 1)
- {
version_str = ZYLIN_OPENOCD_VERSION;
- } else
- {
+ else {
const char *str = Jim_GetString(argv[1], NULL);
const char *str2 = NULL;
if (argc > 2)
str2 = Jim_GetString(argv[2], NULL);
if (strcmp("openocd", str) == 0)
- {
version_str = ZYLIN_OPENOCD;
- }
else if (strcmp("zy1000", str) == 0)
- {
version_str = ZYLIN_VERSION;
- }
else if (strcmp("date", str) == 0)
- {
version_str = ZYLIN_DATE;
- }
else if (strcmp("time", str) == 0)
- {
version_str = ZYLIN_TIME;
- }
- else if (strcmp("pcb", str) == 0)
- {
+ else if (strcmp("pcb", str) == 0) {
#ifdef CYGPKG_HAL_NIOS2
- version_str="c";
+ version_str = "c";
#else
- version_str="b";
+ version_str = "b";
#endif
}
#ifdef CYGPKG_HAL_NIOS2
- else if (strcmp("fpga", str) == 0)
- {
+ else if (strcmp("fpga", str) == 0) {
/* return a list of 32 bit integers to describe the expected
* and actual FPGA
uint32_t id, timestamp;
HAL_READ_UINT32(SYSID_BASE, id);
HAL_READ_UINT32(SYSID_BASE+4, timestamp);
- sprintf(fpga_id, "0x%08x 0x%08x 0x%08x 0x%08x", id, timestamp, SYSID_ID, SYSID_TIMESTAMP);
+ sprintf(fpga_id,
+ "0x%08x 0x%08x 0x%08x 0x%08x",
+ id,
+ timestamp,
+ SYSID_ID,
+ SYSID_TIMESTAMP);
version_str = fpga_id;
- if ((argc>2) && (strcmp("time", str2) == 0))
- {
- time_t last_mod = timestamp;
- char * t = ctime (&last_mod) ;
- t[strlen(t)-1] = 0;
- version_str = t;
+ if ((argc > 2) && (strcmp("time", str2) == 0)) {
+ time_t last_mod = timestamp;
+ char *t = ctime(&last_mod);
+ t[strlen(t)-1] = 0;
+ version_str = t;
}
}
#endif
else
- {
return JIM_ERR;
- }
}
Jim_SetResult(interp, Jim_NewStringObj(interp, version_str, -1));
#ifdef CYGPKG_HAL_NIOS2
-struct info_forward
-{
+struct info_forward {
void *data;
struct cyg_upgrade_info *upgraded_file;
};
-static void report_info(void *data, const char * format, va_list args)
+static void report_info(void *data, const char *format, va_list args)
{
char *s = alloc_vprintf(format, args);
LOG_USER_N("%s", s);
free(s);
}
-struct cyg_upgrade_info firmware_info =
-{
- (uint8_t *)0x84000000,
- "/ram/firmware.phi",
- "Firmware",
- 0x0300000,
- 0x1f00000 -
- 0x0300000,
- "ZylinNiosFirmware\n",
- report_info,
+struct cyg_upgrade_info firmware_info = {
+ (uint8_t *)0x84000000,
+ "/ram/firmware.phi",
+ "Firmware",
+ 0x0300000,
+ 0x1f00000 -
+ 0x0300000,
+ "ZylinNiosFirmware\n",
+ report_info,
};
-// File written to /ram/firmware.phi before arriving at this fn
-static int jim_zy1000_writefirmware(Jim_Interp *interp, int argc, Jim_Obj *const *argv)
+/* File written to /ram/firmware.phi before arriving at this fn */
+static int jim_zy1000_writefirmware(Jim_Interp *interp, int argc, Jim_Obj * const *argv)
{
if (argc != 1)
return JIM_ERR;
}
#endif
-static int
-zylinjtag_Jim_Command_powerstatus(Jim_Interp *interp,
- int argc,
- Jim_Obj * const *argv)
+static int zylinjtag_Jim_Command_powerstatus(Jim_Interp *interp,
+ int argc,
+ Jim_Obj * const *argv)
{
- if (argc != 1)
- {
+ if (argc != 1) {
Jim_WrongNumArgs(interp, 1, argv, "powerstatus");
return JIM_ERR;
}
return JIM_OK;
}
-
-
int zy1000_quit(void)
{
return ERROR_OK;
}
-
-
int interface_jtag_execute_queue(void)
{
uint32_t empty;
/* and handle any callbacks... */
zy1000_flush_callbackqueue();
- if (zy1000_rclk)
- {
+ if (zy1000_rclk) {
/* Only check for errors when using RCLK to speed up
* jtag over TCP/IP
*/
/* clear JTAG error register */
ZY1000_POKE(ZY1000_JTAG_BASE + 0x14, 0x400);
- if ((empty&0x400) != 0)
- {
+ if ((empty&0x400) != 0) {
LOG_WARNING("RCLK timeout");
/* the error is informative only as we don't want to break the firmware if there
* is a false positive.
*/
- // return ERROR_FAIL;
+ /* return ERROR_FAIL; */
}
}
return ERROR_OK;
}
-
-
-
static void writeShiftValue(uint8_t *data, int bits);
-// here we shuffle N bits out/in
-static __inline void scanBits(const uint8_t *out_value, uint8_t *in_value, int num_bits, bool pause_now, tap_state_t shiftState, tap_state_t end_state)
+/* here we shuffle N bits out/in */
+static inline void scanBits(const uint8_t *out_value,
+ uint8_t *in_value,
+ int num_bits,
+ bool pause_now,
+ tap_state_t shiftState,
+ tap_state_t end_state)
{
tap_state_t pause_state = shiftState;
- for (int j = 0; j < num_bits; j += 32)
- {
+ for (int j = 0; j < num_bits; j += 32) {
int k = num_bits - j;
- if (k > 32)
- {
+ if (k > 32) {
k = 32;
/* we have more to shift out */
- } else if (pause_now)
- {
+ } else if (pause_now) {
/* this was the last to shift out this time */
pause_state = end_state;
}
- // we have (num_bits + 7)/8 bytes of bits to toggle out.
- // bits are pushed out LSB to MSB
+ /* we have (num_bits + 7)/8 bytes of bits to toggle out. */
+ /* bits are pushed out LSB to MSB */
uint32_t value;
value = 0;
- if (out_value != NULL)
- {
+ if (out_value != NULL) {
for (int l = 0; l < k; l += 8)
- {
- value|=out_value[(j + l)/8]<<l;
- }
+ value |= out_value[(j + l)/8]<<l;
}
/* mask away unused bits for easier debugging */
if (k < 32)
- {
- value&=~(((uint32_t)0xffffffff) << k);
- } else
- {
+ value &= ~(((uint32_t)0xffffffff) << k);
+ else {
/* Shifting by >= 32 is not defined by the C standard
* and will in fact shift by &0x1f bits on nios */
}
shiftValueInner(shiftState, pause_state, k, value);
if (in_value != NULL)
- {
writeShiftValue(in_value + (j/8), k);
- }
}
}
-static __inline void scanFields(int num_fields, const struct scan_field *fields, tap_state_t shiftState, tap_state_t end_state)
+static inline void scanFields(int num_fields,
+ const struct scan_field *fields,
+ tap_state_t shiftState,
+ tap_state_t end_state)
{
- for (int i = 0; i < num_fields; i++)
- {
+ for (int i = 0; i < num_fields; i++) {
scanBits(fields[i].out_value,
- fields[i].in_value,
- fields[i].num_bits,
- (i == num_fields-1),
- shiftState,
- end_state);
+ fields[i].in_value,
+ fields[i].num_bits,
+ (i == num_fields-1),
+ shiftState,
+ end_state);
}
}
-int interface_jtag_add_ir_scan(struct jtag_tap *active, const struct scan_field *fields, tap_state_t state)
+int interface_jtag_add_ir_scan(struct jtag_tap *active,
+ const struct scan_field *fields,
+ tap_state_t state)
{
int scan_size = 0;
struct jtag_tap *tap, *nextTap;
tap_state_t pause_state = TAP_IRSHIFT;
- for (tap = jtag_tap_next_enabled(NULL); tap!= NULL; tap = nextTap)
- {
+ for (tap = jtag_tap_next_enabled(NULL); tap != NULL; tap = nextTap) {
nextTap = jtag_tap_next_enabled(tap);
- if (nextTap==NULL)
- {
+ if (nextTap == NULL)
pause_state = state;
- }
scan_size = tap->ir_length;
/* search the list */
- if (tap == active)
- {
+ if (tap == active) {
scanFields(1, fields, TAP_IRSHIFT, pause_state);
/* update device information */
buf_cpy(fields[0].out_value, tap->cur_instr, scan_size);
tap->bypass = 0;
- } else
- {
+ } else {
/* if a device isn't listed, set it to BYPASS */
assert(scan_size <= 32);
shiftValueInner(TAP_IRSHIFT, pause_state, scan_size, 0xffffffff);
return ERROR_OK;
}
-
-
-
-
-int interface_jtag_add_plain_ir_scan(int num_bits, const uint8_t *out_bits, uint8_t *in_bits, tap_state_t state)
+int interface_jtag_add_plain_ir_scan(int num_bits,
+ const uint8_t *out_bits,
+ uint8_t *in_bits,
+ tap_state_t state)
{
scanBits(out_bits, in_bits, num_bits, true, TAP_IRSHIFT, state);
return ERROR_OK;
}
-int interface_jtag_add_dr_scan(struct jtag_tap *active, int num_fields, const struct scan_field *fields, tap_state_t state)
+int interface_jtag_add_dr_scan(struct jtag_tap *active,
+ int num_fields,
+ const struct scan_field *fields,
+ tap_state_t state)
{
struct jtag_tap *tap, *nextTap;
tap_state_t pause_state = TAP_DRSHIFT;
- for (tap = jtag_tap_next_enabled(NULL); tap!= NULL; tap = nextTap)
- {
+ for (tap = jtag_tap_next_enabled(NULL); tap != NULL; tap = nextTap) {
nextTap = jtag_tap_next_enabled(tap);
- if (nextTap==NULL)
- {
+ if (nextTap == NULL)
pause_state = state;
- }
/* Find a range of fields to write to this tap */
- if (tap == active)
- {
+ if (tap == active) {
assert(!tap->bypass);
scanFields(num_fields, fields, TAP_DRSHIFT, pause_state);
- } else
- {
+ } else {
/* Shift out a 0 for disabled tap's */
assert(tap->bypass);
shiftValueInner(TAP_DRSHIFT, pause_state, 1, 0);
return ERROR_OK;
}
-int interface_jtag_add_plain_dr_scan(int num_bits, const uint8_t *out_bits, uint8_t *in_bits, tap_state_t state)
+int interface_jtag_add_plain_dr_scan(int num_bits,
+ const uint8_t *out_bits,
+ uint8_t *in_bits,
+ tap_state_t state)
{
scanBits(out_bits, in_bits, num_bits, true, TAP_DRSHIFT, state);
return ERROR_OK;
return ERROR_OK;
}
-
int interface_jtag_add_reset(int req_trst, int req_srst)
{
zy1000_reset(req_trst, req_srst);
/* execute num_cycles, 32 at the time. */
int i;
- for (i = 0; i < num_cycles; i += 32)
- {
+ for (i = 0; i < num_cycles; i += 32) {
int num;
num = 32;
if (num_cycles-i < num)
- {
num = num_cycles-i;
- }
shiftValueInner(clockstate, clockstate, num, 0);
}
uint8_t tms_scan = tap_get_tms_path(t, state);
int tms_count = tap_get_tms_path_len(tap_get_state(), tap_get_end_state());
- for (i = 0; i < tms_count; i++)
- {
+ for (i = 0; i < tms_count; i++) {
tms = (tms_scan >> i) & 1;
waitIdle();
ZY1000_POKE(ZY1000_JTAG_BASE + 0x28, tms);
/*wait for the fifo to be empty*/
waitIdle();
- for (unsigned i = 0; i < num_bits; i++)
- {
+ for (unsigned i = 0; i < num_bits; i++) {
int tms;
if (((seq[i/8] >> (i % 8)) & 1) == 0)
- {
tms = 0;
- }
else
- {
tms = 1;
- }
waitIdle();
ZY1000_POKE(ZY1000_JTAG_BASE + 0x28, tms);
waitIdle();
if (state != TAP_INVALID)
- {
ZY1000_POKE(ZY1000_JTAG_BASE + 0x20, state);
- } else
- {
- /* this would be normal if we are switching to SWD mode */
+ else {
+ /* this would be normal if
+ * we are switching to SWD mode */
}
return ERROR_OK;
}
memset(seq, 0, sizeof(seq));
assert(num_states < (int)((sizeof(seq) * 8)));
- while (num_states)
- {
+ while (num_states) {
if (tap_state_transition(cur_state, false) == path[state_count])
- {
tms = 0;
- }
else if (tap_state_transition(cur_state, true) == path[state_count])
- {
tms = 1;
- }
- else
- {
- LOG_ERROR("BUG: %s -> %s isn't a valid TAP transition", tap_state_name(cur_state), tap_state_name(path[state_count]));
+ else {
+ LOG_ERROR("BUG: %s -> %s isn't a valid TAP transition",
+ tap_state_name(cur_state), tap_state_name(path[state_count]));
exit(-1);
}
bool found = false;
struct jtag_tap *cur_tap, *nextTap;
- for (cur_tap = jtag_tap_next_enabled(NULL); cur_tap!= NULL; cur_tap = nextTap)
- {
+ for (cur_tap = jtag_tap_next_enabled(NULL); cur_tap != NULL; cur_tap = nextTap) {
nextTap = jtag_tap_next_enabled(cur_tap);
if (cur_tap == tap)
- {
found = true;
- } else
- {
+ else {
if (found)
- {
post_bits++;
- } else
- {
+ else
pre_bits++;
- }
}
}
*pre = pre_bits;
*post = post_bits;
}
-/*
- static const int embeddedice_num_bits[] = {32, 6};
+#if 0
+static const int embeddedice_num_bits[] = {32, 6};
uint32_t values[2];
values[0] = value;
values[1] = (1 << 5) | reg_addr;
- jtag_add_dr_out(tap,
- 2,
- embeddedice_num_bits,
- values,
- TAP_IDLE);
-*/
+ jtag_add_dr_out(tap, 2, embeddedice_num_bits, values, TAP_IDLE);
+#endif
-void embeddedice_write_dcc(struct jtag_tap *tap, int reg_addr, const uint8_t *buffer, int little, int count)
+void embeddedice_write_dcc(struct jtag_tap *tap,
+ int reg_addr,
+ const uint8_t *buffer,
+ int little,
+ int count)
{
#if 0
int i;
- for (i = 0; i < count; i++)
- {
- embeddedice_write_reg_inner(tap, reg_addr, fast_target_buffer_get_u32(buffer, little));
+ for (i = 0; i < count; i++) {
+ embeddedice_write_reg_inner(tap, reg_addr, fast_target_buffer_get_u32(buffer,
+ little));
buffer += 4;
}
#else
int post_bits;
jtag_pre_post_bits(tap, &pre_bits, &post_bits);
- if ((pre_bits > 32) || (post_bits + 6 > 32))
- {
+ if ((pre_bits > 32) || (post_bits + 6 > 32)) {
int i;
- for (i = 0; i < count; i++)
- {
- embeddedice_write_reg_inner(tap, reg_addr, fast_target_buffer_get_u32(buffer, little));
+ for (i = 0; i < count; i++) {
+ embeddedice_write_reg_inner(tap, reg_addr,
+ fast_target_buffer_get_u32(buffer, little));
buffer += 4;
}
- } else
- {
+ } else {
int i;
- for (i = 0; i < count; i++)
- {
+ for (i = 0; i < count; i++) {
/* Fewer pokes means we get to use the FIFO more efficiently */
shiftValueInner(TAP_DRSHIFT, TAP_DRSHIFT, pre_bits, 0);
- shiftValueInner(TAP_DRSHIFT, TAP_DRSHIFT, 32, fast_target_buffer_get_u32(buffer, little));
+ shiftValueInner(TAP_DRSHIFT, TAP_DRSHIFT, 32,
+ fast_target_buffer_get_u32(buffer, little));
/* Danger! here we need to exit into the TAP_IDLE state to make
* DCC pick up this value.
*/
- shiftValueInner(TAP_DRSHIFT, TAP_IDLE, 6 + post_bits, (reg_addr | (1 << 5)));
+ shiftValueInner(TAP_DRSHIFT, TAP_IDLE, 6 + post_bits,
+ (reg_addr | (1 << 5)));
buffer += 4;
}
}
#endif
}
-
-
-int arm11_run_instr_data_to_core_noack_inner(struct jtag_tap * tap, uint32_t opcode, const uint32_t * data, size_t count)
+int arm11_run_instr_data_to_core_noack_inner(struct jtag_tap *tap,
+ uint32_t opcode,
+ const uint32_t *data,
+ size_t count)
{
/* bypass bits before and after */
int pre_bits;
int post_bits;
jtag_pre_post_bits(tap, &pre_bits, &post_bits);
- post_bits+=2;
+ post_bits += 2;
- if ((pre_bits > 32) || (post_bits > 32))
- {
- int arm11_run_instr_data_to_core_noack_inner_default(struct jtag_tap *, uint32_t, const uint32_t *, size_t);
+ if ((pre_bits > 32) || (post_bits > 32)) {
+ int arm11_run_instr_data_to_core_noack_inner_default(struct jtag_tap *,
+ uint32_t, const uint32_t *, size_t);
return arm11_run_instr_data_to_core_noack_inner_default(tap, opcode, data, count);
- } else
- {
+ } else {
static const int bits[] = {32, 2};
uint32_t values[] = {0, 0};
* with unaligned uint32_t * pointers... */
const uint8_t *t = (const uint8_t *)data;
- while (--count > 0)
- {
+ while (--count > 0) {
#if 1
/* Danger! This code doesn't update cmd_queue_cur_state, so
* invoking jtag_add_pathmove() before jtag_add_dr_out() after
shiftValueInner(TAP_DRSHIFT, TAP_DRPAUSE, post_bits, 0);
/* copy & paste from arm11_dbgtap.c */
- //TAP_DREXIT2, TAP_DRUPDATE, TAP_IDLE, TAP_IDLE, TAP_IDLE, TAP_DRSELECT, TAP_DRCAPTURE, TAP_DRSHIFT
+ /* TAP_DREXIT2, TAP_DRUPDATE, TAP_IDLE, TAP_IDLE, TAP_IDLE, TAP_DRSELECT,
+ * TAP_DRCAPTURE, TAP_DRSHIFT */
/* KLUDGE! we have to flush the fifo or the Nios CPU locks up.
* This is probably a bug in the Avalon bus(cross clocking bridge?)
* or in the jtag registers module.
ZY1000_POKE(ZY1000_JTAG_BASE + 0x20, TAP_DRSHIFT);
waitIdle();
#else
- static const tap_state_t arm11_MOVE_DRPAUSE_IDLE_DRPAUSE_with_delay[] =
- {
- TAP_DREXIT2, TAP_DRUPDATE, TAP_IDLE, TAP_IDLE, TAP_IDLE, TAP_DRSELECT, TAP_DRCAPTURE, TAP_DRSHIFT
+ static const tap_state_t arm11_MOVE_DRPAUSE_IDLE_DRPAUSE_with_delay[] = {
+ TAP_DREXIT2, TAP_DRUPDATE, TAP_IDLE, TAP_IDLE, TAP_IDLE,
+ TAP_DRSELECT, TAP_DRCAPTURE, TAP_DRSHIFT
};
values[0] = *t++;
}
}
-
static const struct command_registration zy1000_commands[] = {
{
.name = "power",
COMMAND_REGISTRATION_DONE
};
-
#if !BUILD_ZY1000_MASTER
static int tcp_ip = -1;
static bool writeLong(uint32_t l)
{
int i;
- for (i = 0; i < 4; i++)
- {
+ for (i = 0; i < 4; i++) {
uint8_t c = (l >> (i*8))&0xff;
out_buffer[out_pos++] = c;
- if (out_pos >= sizeof(out_buffer))
- {
+ if (out_pos >= sizeof(out_buffer)) {
if (!flush_writes())
- {
return false;
- }
}
}
return true;
{
uint32_t data = 0;
int i;
- for (i = 0; i < 4; i++)
- {
+ for (i = 0; i < 4; i++) {
uint8_t c;
- if (in_pos == in_write)
- {
+ if (in_pos == in_write) {
/* If we have some data that we can send, send them before
* we wait for more data
*/
- if (out_pos > 0)
- {
+ if (out_pos > 0) {
if (!flush_writes())
- {
return false;
- }
}
/* read more */
int t;
t = read(tcp_ip, in_buffer, sizeof(in_buffer));
if (t < 1)
- {
return false;
- }
in_write = (size_t) t;
in_pos = 0;
}
return true;
}
-enum ZY1000_CMD
-{
+enum ZY1000_CMD {
ZY1000_CMD_POKE = 0x0,
ZY1000_CMD_PEEK = 0x8,
ZY1000_CMD_SLEEP = 0x1,
ZY1000_CMD_WAITIDLE = 2
};
-#include <sys/socket.h> /* for socket(), connect(), send(), and recv() */
-#include <arpa/inet.h> /* for sockaddr_in and inet_addr() */
+#include <sys/socket.h> /* for socket(), connect(), send(), and recv() */
+#include <arpa/inet.h> /* for sockaddr_in and inet_addr() */
/* We initialize this late since we need to know the server address
* first.
if (tcp_ip >= 0)
return;
- struct sockaddr_in echoServAddr; /* Echo server address */
+ struct sockaddr_in echoServAddr;/* Echo server address */
/* Create a reliable, stream socket using TCP */
- if ((tcp_ip = socket(PF_INET, SOCK_STREAM, IPPROTO_TCP)) < 0)
- {
+ tcp_ip = socket(PF_INET, SOCK_STREAM, IPPROTO_TCP);
+ if (tcp_ip < 0) {
fprintf(stderr, "Failed to connect to zy1000 server\n");
exit(-1);
}
/* Construct the server address structure */
- memset(&echoServAddr, 0, sizeof(echoServAddr)); /* Zero out structure */
- echoServAddr.sin_family = AF_INET; /* Internet address family */
- echoServAddr.sin_addr.s_addr = inet_addr(tcp_server); /* Server IP address */
- echoServAddr.sin_port = htons(7777); /* Server port */
+ memset(&echoServAddr, 0, sizeof(echoServAddr)); /* Zero out structure */
+ echoServAddr.sin_family = AF_INET; /* Internet address family */
+ echoServAddr.sin_addr.s_addr = inet_addr(tcp_server); /* Server IP address */
+ echoServAddr.sin_port = htons(7777); /* Server port */
/* Establish the connection to the echo server */
- if (connect(tcp_ip, (struct sockaddr *) &echoServAddr, sizeof(echoServAddr)) < 0)
- {
+ if (connect(tcp_ip, (struct sockaddr *) &echoServAddr, sizeof(echoServAddr)) < 0) {
fprintf(stderr, "Failed to connect to zy1000 server\n");
exit(-1);
}
int flag = 1;
setsockopt(tcp_ip, /* socket affected */
- IPPROTO_TCP, /* set option at TCP level */
- TCP_NODELAY, /* name of option */
- (char *)&flag, /* the cast is historical cruft */
- sizeof(int)); /* length of option value */
+ IPPROTO_TCP, /* set option at TCP level */
+ TCP_NODELAY, /* name of option */
+ (char *)&flag, /* the cast is historical cruft */
+ sizeof(int)); /* length of option value */
}
-
/* send a poke */
void zy1000_tcpout(uint32_t address, uint32_t data)
{
tcpip_open();
- if (!writeLong((ZY1000_CMD_POKE << 24) | address)||
- !writeLong(data))
- {
+ if (!writeLong((ZY1000_CMD_POKE << 24) | address) || !writeLong(data)) {
fprintf(stderr, "Could not write to zy1000 server\n");
exit(-1);
}
void waitIdle(void)
{
tcpip_open();
- if (!writeLong((ZY1000_CMD_WAITIDLE << 24)))
- {
+ if (!writeLong((ZY1000_CMD_WAITIDLE << 24))) {
fprintf(stderr, "Could not write to zy1000 server\n");
exit(-1);
}
zy1000_flush_readqueue();
uint32_t data;
- if (!writeLong((ZY1000_CMD_PEEK << 24) | address)||
- !readLong(&data))
- {
+ if (!writeLong((ZY1000_CMD_PEEK << 24) | address) || !readLong(&data)) {
fprintf(stderr, "Could not read from zy1000 server\n");
exit(-1);
}
int interface_jtag_add_sleep(uint32_t us)
{
tcpip_open();
- if (!writeLong((ZY1000_CMD_SLEEP << 24))||
- !writeLong(us))
- {
+ if (!writeLong((ZY1000_CMD_SLEEP << 24)) || !writeLong(us)) {
fprintf(stderr, "Could not read from zy1000 server\n");
exit(-1);
}
/* queue a readback */
#define readqueue_size 16384
-static struct
-{
+static struct {
uint8_t *dest;
int bits;
} readqueue[readqueue_size];
-static int readqueue_pos = 0;
+static int readqueue_pos;
/* flush the readqueue, this means reading any data that
* we're expecting and store them into the final position
*/
void zy1000_flush_readqueue(void)
{
- if (readqueue_pos == 0)
- {
+ if (readqueue_pos == 0) {
/* simply debugging by allowing easy breakpoints when there
* is something to do. */
return;
}
int i;
tcpip_open();
- for (i = 0; i < readqueue_pos; i++)
- {
+ for (i = 0; i < readqueue_pos; i++) {
uint32_t value;
- if (!readLong(&value))
- {
+ if (!readLong(&value)) {
fprintf(stderr, "Could not read from zy1000 server\n");
exit(-1);
}
uint8_t *in_value = readqueue[i].dest;
int k = readqueue[i].bits;
- // we're shifting in data to MSB, shift data to be aligned for returning the value
+ /* we're shifting in data to MSB, shift data to be aligned for returning the value */
value >>= 32-k;
for (int l = 0; l < k; l += 8)
- {
- in_value[l/8]=(value >> l)&0xff;
- }
+ in_value[l/8] = (value >> l)&0xff;
}
readqueue_pos = 0;
}
/* By queuing the callback's we avoid flushing the
-read queue until jtag_execute_queue(). This can
-reduce latency dramatically for cases where
-callbacks are used extensively.
+ * read queue until jtag_execute_queue(). This can
+ * reduce latency dramatically for cases where
+ * callbacks are used extensively.
*/
#define callbackqueue_size 128
-static struct callbackentry
-{
+static struct callbackentry {
jtag_callback_t callback;
jtag_callback_data_t data0;
jtag_callback_data_t data1;
jtag_callback_data_t data3;
} callbackqueue[callbackqueue_size];
-static int callbackqueue_pos = 0;
+static int callbackqueue_pos;
-void zy1000_jtag_add_callback4(jtag_callback_t callback, jtag_callback_data_t data0, jtag_callback_data_t data1, jtag_callback_data_t data2, jtag_callback_data_t data3)
+void zy1000_jtag_add_callback4(jtag_callback_t callback,
+ jtag_callback_data_t data0,
+ jtag_callback_data_t data1,
+ jtag_callback_data_t data2,
+ jtag_callback_data_t data3)
{
if (callbackqueue_pos >= callbackqueue_size)
- {
zy1000_flush_callbackqueue();
- }
callbackqueue[callbackqueue_pos].callback = callback;
callbackqueue[callbackqueue_pos].data0 = data0;
zy1000_flush_callbackqueue();
}
-static int zy1000_jtag_convert_to_callback4(jtag_callback_data_t data0, jtag_callback_data_t data1, jtag_callback_data_t data2, jtag_callback_data_t data3)
+static int zy1000_jtag_convert_to_callback4(jtag_callback_data_t data0,
+ jtag_callback_data_t data1,
+ jtag_callback_data_t data2,
+ jtag_callback_data_t data3)
{
((jtag_callback1_t)data1)(data0);
return ERROR_OK;
void zy1000_jtag_add_callback(jtag_callback1_t callback, jtag_callback_data_t data0)
{
- zy1000_jtag_add_callback4(zy1000_jtag_convert_to_callback4, data0, (jtag_callback_data_t)callback, 0, 0);
+ zy1000_jtag_add_callback4(zy1000_jtag_convert_to_callback4,
+ data0,
+ (jtag_callback_data_t)callback,
+ 0,
+ 0);
}
void zy1000_flush_callbackqueue(void)
{
/* we have to flush the read queue so we have access to
- the data the callbacks will use
+ the data the callbacks will use
*/
zy1000_flush_readqueue();
int i;
- for (i = 0; i < callbackqueue_pos; i++)
- {
+ for (i = 0; i < callbackqueue_pos; i++) {
struct callbackentry *entry = &callbackqueue[i];
- jtag_set_error(entry->callback(entry->data0, entry->data1, entry->data2, entry->data3));
+ jtag_set_error(entry->callback(entry->data0, entry->data1, entry->data2,
+ entry->data3));
}
callbackqueue_pos = 0;
}
{
waitIdle();
- if (!writeLong((ZY1000_CMD_PEEK << 24) | (ZY1000_JTAG_BASE + 0xc)))
- {
+ if (!writeLong((ZY1000_CMD_PEEK << 24) | (ZY1000_JTAG_BASE + 0xc))) {
fprintf(stderr, "Could not read from zy1000 server\n");
exit(-1);
}
if (readqueue_pos >= readqueue_size)
- {
zy1000_flush_readqueue();
- }
readqueue[readqueue_pos].dest = data;
readqueue[readqueue_pos].bits = bits;
ZY1000_PEEK(ZY1000_JTAG_BASE + 0xc, value);
VERBOSE(LOG_INFO("getShiftValue %08x", value));
- // data in, LSB to MSB
- // we're shifting in data to MSB, shift data to be aligned for returning the value
+ /* data in, LSB to MSB */
+ /* we're shifting in data to MSB, shift data to be aligned for returning the value */
value >>= 32 - bits;
for (int l = 0; l < bits; l += 8)
- {
- data[l/8]=(value >> l)&0xff;
- }
+ data[l/8] = (value >> l)&0xff;
}
#endif
{
int so_reuseaddr_option = 1;
- int fd;
- if ((fd = socket(AF_INET, SOCK_STREAM, 0)) == -1)
- {
+ int fd = socket(AF_INET, SOCK_STREAM, 0);
+ if (fd == -1) {
LOG_ERROR("error creating socket: %s", strerror(errno));
exit(-1);
}
- setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, (void*) &so_reuseaddr_option,
- sizeof(int));
+ setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, (void *) &so_reuseaddr_option,
+ sizeof(int));
struct sockaddr_in sin;
unsigned int address_size;
sin.sin_addr.s_addr = INADDR_ANY;
sin.sin_port = htons(8888);
- if (bind(fd, (struct sockaddr *) &sin, sizeof(sin)) == -1)
- {
+ if (bind(fd, (struct sockaddr *) &sin, sizeof(sin)) == -1) {
LOG_ERROR("couldn't bind to socket: %s", strerror(errno));
exit(-1);
}
- if (listen(fd, 1) == -1)
- {
+ if (listen(fd, 1) == -1) {
LOG_ERROR("couldn't listen on socket: %s", strerror(errno));
exit(-1);
}
- for (;;)
- {
+ for (;; ) {
int watchdog_ip = accept(fd, (struct sockaddr *) &sin, &address_size);
/* Start watchdog, must be reset every 10 seconds. */
HAL_WRITE_UINT32(WATCHDOG_BASE + 4, 4);
- if (watchdog_ip < 0)
- {
+ if (watchdog_ip < 0) {
LOG_ERROR("couldn't open watchdog socket: %s", strerror(errno));
exit(-1);
}
int flag = 1;
setsockopt(watchdog_ip, /* socket affected */
- IPPROTO_TCP, /* set option at TCP level */
- TCP_NODELAY, /* name of option */
- (char *)&flag, /* the cast is historical cruft */
- sizeof(int)); /* length of option value */
+ IPPROTO_TCP, /* set option at TCP level */
+ TCP_NODELAY, /* name of option */
+ (char *)&flag, /* the cast is historical cruft */
+ sizeof(int)); /* length of option value */
char buf;
- for (;;)
- {
- if (read(watchdog_ip, &buf, 1) == 1)
- {
+ for (;; ) {
+ if (read(watchdog_ip, &buf, 1) == 1) {
/* Reset timer */
HAL_WRITE_UINT32(WATCHDOG_BASE + 8, 0x1234);
/* Echo so we can telnet in and see that resetting works */
write(watchdog_ip, &buf, 1);
- } else
- {
+ } else {
/* Stop tickling the watchdog, the CPU will reset in < 10 seconds
* now.
*/
#if BUILD_ECOSBOARD
LOG_USER("%s", ZYLIN_OPENOCD_VERSION);
#elif BUILD_ZY1000_MASTER
- int fd;
- if((fd = open("/dev/mem", O_RDWR | O_SYNC)) == -1)
- {
- LOG_ERROR("No access to /dev/mem");
- return ERROR_FAIL;
- }
+ int fd = open("/dev/mem", O_RDWR | O_SYNC);
+ if (fd == -1) {
+ LOG_ERROR("No access to /dev/mem");
+ return ERROR_FAIL;
+ }
#ifndef REGISTERS_BASE
#define REGISTERS_BASE 0x9002000
#define REGISTERS_SPAN 128
#endif
-
- zy1000_jtag_master = mmap(0, REGISTERS_SPAN, PROT_READ | PROT_WRITE, MAP_SHARED, fd, REGISTERS_BASE);
-
- if(zy1000_jtag_master == (void *) -1)
- {
- close(fd);
- LOG_ERROR("No access to /dev/mem");
- return ERROR_FAIL;
- }
-#endif
-
+ zy1000_jtag_master = mmap(0,
+ REGISTERS_SPAN,
+ PROT_READ | PROT_WRITE,
+ MAP_SHARED,
+ fd,
+ REGISTERS_BASE);
+
+ if (zy1000_jtag_master == (void *) -1) {
+ close(fd);
+ LOG_ERROR("No access to /dev/mem");
+ return ERROR_FAIL;
+ }
+#endif
- ZY1000_POKE(ZY1000_JTAG_BASE + 0x10, 0x30); // Turn on LED1 & LED2
-
- setPower(true); // on by default
+ ZY1000_POKE(ZY1000_JTAG_BASE + 0x10, 0x30); /* Turn on LED1 & LED2 */
+ setPower(true); /* on by default */
- /* deassert resets. Important to avoid infinite loop waiting for SRST to deassert */
+ /* deassert resets. Important to avoid infinite loop waiting for SRST to deassert */
zy1000_reset(0, 0);
#if BUILD_ZY1000_MASTER
#if BUILD_ECOSBOARD
#ifdef WATCHDOG_BASE
cyg_thread_create(1, watchdog_server, (cyg_addrword_t) 0, "watchdog tcip/ip server",
- (void *) watchdog_stack, sizeof(watchdog_stack),
- &watchdog_thread_handle, &watchdog_thread_object);
+ (void *) watchdog_stack, sizeof(watchdog_stack),
+ &watchdog_thread_handle, &watchdog_thread_object);
cyg_thread_resume(watchdog_thread_handle);
#endif
#endif
return ERROR_OK;
}
-
-
-struct jtag_interface zy1000_interface =
-{
+struct jtag_interface zy1000_interface = {
.name = "ZY1000",
.supported = DEBUG_CAP_TMS_SEQ,
.execute_queue = NULL,
projects / fw / openocd / blobdiff