/* SWD_ACK_* bits are defined in <target/arm_adi_v5.h> */
+/*
+ * The following sequences are updated to
+ * ARM(tm) Debug Interface v5 Architecture Specification ARM IHI 0031E
+ */
+
/**
- * Line reset.
+ * SWD Line reset.
*
- * Line reset is at least 50 SWCLK cycles with SWDIO driven high, followed
- * by at least one idle (low) cycle.
+ * SWD Line reset is at least 50 SWCLK cycles with SWDIO driven high,
+ * followed by at least two idle (low) cycle.
+ * Bits are stored (and transmitted) LSB-first.
*/
static const uint8_t swd_seq_line_reset[] = {
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x03
+ /* At least 50 SWCLK cycles with SWDIO high */
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ /* At least 2 idle (low) cycles */
+ 0x00,
};
-static const unsigned swd_seq_line_reset_len = 51;
+static const unsigned swd_seq_line_reset_len = 64;
/**
* JTAG-to-SWD sequence.
* high, putting either interface logic into reset state, followed by a
* specific 16-bit sequence and finally a line reset in case the SWJ-DP was
* already in SWD mode.
+ * Bits are stored (and transmitted) LSB-first.
*/
static const uint8_t swd_seq_jtag_to_swd[] = {
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7b, 0x9e,
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0f,
+ /* At least 50 TCK/SWCLK cycles with TMS/SWDIO high */
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ /* Switching sequence from JTAG to SWD */
+ 0x9e, 0xe7,
+ /* At least 50 TCK/SWCLK cycles with TMS/SWDIO high */
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ /* At least 2 idle (low) cycles */
+ 0x00,
};
-static const unsigned swd_seq_jtag_to_swd_len = 118;
+static const unsigned swd_seq_jtag_to_swd_len = 136;
/**
* SWD-to-JTAG sequence.
*
* The SWD-to-JTAG sequence is at least 50 TCK/SWCLK cycles with TMS/SWDIO
* high, putting either interface logic into reset state, followed by a
- * specific 16-bit sequence and finally at least 5 TCK cycles to put the
- * JTAG TAP in TLR.
+ * specific 16-bit sequence and finally at least 5 TCK/SWCLK cycles with
+ * TMS/SWDIO high to put the JTAG TAP in Test-Logic-Reset state.
+ * Bits are stored (and transmitted) LSB-first.
*/
static const uint8_t swd_seq_swd_to_jtag[] = {
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf3, 0x9c, 0xff
+ /* At least 50 TCK/SWCLK cycles with TMS/SWDIO high */
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ /* Switching sequence from SWD to JTAG */
+ 0x3c, 0xe7,
+ /* At least 5 TCK/SWCLK cycles with TMS/SWDIO high */
+ 0xff,
};
-static const unsigned swd_seq_swd_to_jtag_len = 71;
+static const unsigned swd_seq_swd_to_jtag_len = 80;
/**
* SWD-to-dormant sequence.
*
* This is at least 50 SWCLK cycles with SWDIO high to put the interface
* in reset state, followed by a specific 16-bit sequence.
+ * Bits are stored (and transmitted) LSB-first.
*/
static const uint8_t swd_seq_swd_to_dormant[] = {
- 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf3, 0x8e, 0x03
+ /* At least 50 SWCLK cycles with SWDIO high */
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ /* Switching sequence from SWD to dormant */
+ 0xbc, 0xe3,
};
-static const unsigned swd_seq_swd_to_dormant_len = 66;
+static const unsigned swd_seq_swd_to_dormant_len = 72;
/**
* Dormant-to-SWD sequence.
* sequence, followed by 4 TCK/SWCLK cycles with TMS/SWDIO low, followed by
* a specific protocol-dependent activation code. For SWD the activation code
* is an 8-bit sequence. The sequence ends with a line reset.
+ * Bits are stored (and transmitted) LSB-first.
*/
static const uint8_t swd_seq_dormant_to_swd[] = {
+ /* At least 8 SWCLK cycles with SWDIO high */
0xff,
+ /* Selection alert sequence */
0x92, 0xf3, 0x09, 0x62, 0x95, 0x2d, 0x85, 0x86,
0xe9, 0xaf, 0xdd, 0xe3, 0xa2, 0x0e, 0xbc, 0x19,
- 0x10, 0xfa, 0xff, 0xff, 0xff, 0xff, 0xff, 0x3f
+ /*
+ * 4 SWCLK cycles with SWDIO low ...
+ * + SWD activation code 0x1a ...
+ * + at least 8 SWCLK cycles with SWDIO high
+ */
+ 0xa0, /* ((0x00) & GENMASK(3, 0)) | ((0x1a << 4) & GENMASK(7, 4)) */
+ 0xf1, /* ((0x1a >> 4) & GENMASK(3, 0)) | ((0xff << 4) & GENMASK(7, 4)) */
+ 0xff,
+ /* At least 50 SWCLK cycles with SWDIO high */
+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ /* At least 2 idle (low) cycles */
+ 0x00,
};
-static const unsigned swd_seq_dormant_to_swd_len = 199;
+static const unsigned swd_seq_dormant_to_swd_len = 224;
+
+/**
+ * JTAG-to-dormant sequence.
+ *
+ * This is at least 5 TCK cycles with TMS high to put the interface
+ * in test-logic-reset state, followed by a specific 31-bit sequence.
+ * Bits are stored (and transmitted) LSB-first.
+ */
+static const uint8_t swd_seq_jtag_to_dormant[] = {
+ /* At least 5 TCK cycles with TMS high */
+ 0xff,
+ /*
+ * Still one TCK cycle with TMS high followed by 31 bits JTAG-to-DS
+ * select sequence 0xba, 0xbb, 0xbb, 0x33,
+ */
+ 0x75, /* ((0xff >> 7) & GENMASK(0, 0)) | ((0xba << 1) & GENMASK(7, 1)) */
+ 0x77, /* ((0xba >> 7) & GENMASK(0, 0)) | ((0xbb << 1) & GENMASK(7, 1)) */
+ 0x77, /* ((0xbb >> 7) & GENMASK(0, 0)) | ((0xbb << 1) & GENMASK(7, 1)) */
+ 0x67, /* ((0xbb >> 7) & GENMASK(0, 0)) | ((0x33 << 1) & GENMASK(7, 1)) */
+};
+static const unsigned swd_seq_jtag_to_dormant_len = 40;
+
+/**
+ * Dormant-to-JTAG sequence.
+ *
+ * This is at least 8 TCK/SWCLK cycles with TMS/SWDIO high to abort any ongoing
+ * selection alert sequence, followed by a specific 128-bit selection alert
+ * sequence, followed by 4 TCK/SWCLK cycles with TMS/SWDIO low, followed by
+ * a specific protocol-dependent activation code. For JTAG there are two
+ * possible activation codes:
+ * - "JTAG-Serial": 12 bits 0x00, 0x00
+ * - "Arm CoreSight JTAG-DP": 8 bits 0x0a
+ * We use "JTAG-Serial" only, which seams more generic.
+ * Since the target TAP can be either in Run/Test Idle or in Test-Logic-Reset
+ * states, Arm recommends to put the TAP in Run/Test Idle using one TCK cycle
+ * with TMS low. To keep the sequence length multiple of 8, 8 TCK cycle with
+ * TMS low are sent (allowed by JTAG state machine).
+ * Bits are stored (and transmitted) LSB-first.
+ */
+static const uint8_t swd_seq_dormant_to_jtag[] = {
+ /* At least 8 TCK/SWCLK cycles with TMS/SWDIO high */
+ 0xff,
+ /* Selection alert sequence */
+ 0x92, 0xf3, 0x09, 0x62, 0x95, 0x2d, 0x85, 0x86,
+ 0xe9, 0xaf, 0xdd, 0xe3, 0xa2, 0x0e, 0xbc, 0x19,
+ /*
+ * 4 TCK/SWCLK cycles with TMS/SWDIO low ...
+ * + 12 bits JTAG-serial activation code 0x00, 0x00
+ */
+ 0x00, 0x00,
+ /* put the TAP in Run/Test Idle */
+ 0x00,
+};
+static const unsigned swd_seq_dormant_to_jtag_len = 160;
enum swd_special_seq {
LINE_RESET,
int swd_init_reset(struct command_context *cmd_ctx);
void swd_add_reset(int req_srst);
-bool transport_is_swd(void);
-
#endif /* OPENOCD_JTAG_SWD_H */
projects / fw / openocd / blobdiff