# documented nor supported except on ZY1000.
proc power_restore {} {
- puts "Sensed power restore, running reset init and halting GDB."
+ echo "Sensed power restore, running reset init and halting GDB."
reset init
# Halt GDB so user can deal with a detected power restore.
add_help_text power_restore "Overridable procedure run when power restore is detected. Runs 'reset init' by default."
proc power_dropout {} {
- puts "Sensed power dropout."
+ echo "Sensed power dropout."
}
#########
# documented nor supported except on ZY1000.
proc srst_deasserted {} {
- puts "Sensed nSRST deasserted, running reset init and halting GDB."
+ echo "Sensed nSRST deasserted, running reset init and halting GDB."
reset init
# Halt GDB so user can deal with a detected reset.
add_help_text srst_deasserted "Overridable procedure run when srst deassert is detected. Runs 'reset init' by default."
proc srst_asserted {} {
- puts "Sensed nSRST asserted."
+ echo "Sensed nSRST asserted."
}
+# measure actual JTAG clock
+proc measure_clk {} {
+ set start_time [ms];
+ runtest 10000000;
+ echo "Running at more than [expr 10000.0 / ([ms]-$start_time)] kHz";
+}
+
+add_help_text measure_clk "Runs a test to measure the JTAG clk. Useful with RCLK / RTCK."
+
# BEGIN MIGRATION AIDS ... these adapter operations originally had
# JTAG-specific names despite the fact that the operations were not
-# specific to JTAG.
+# specific to JTAG, or otherewise had troublesome/misleading names.
#
# FIXME phase these aids out after about April 2011
#
-proc jtag_khz args { eval adapter_khz $args }
+proc jtag_khz args {
+ echo "DEPRECATED! use 'adapter_khz' not 'jtag_khz'"
+ eval adapter_khz $args
+}
+
+proc jtag_nsrst_delay args {
+ echo "DEPRECATED! use 'adapter_nsrst_delay' not 'jtag_nsrst_delay'"
+ eval adapter_nsrst_delay $args
+}
+
+proc jtag_nsrst_assert_width args {
+ echo "DEPRECATED! use 'adapter_nsrst_assert_width' not 'jtag_nsrst_assert_width'"
+ eval adapter_nsrst_assert_width $args
+}
+
# END MIGRATION AIDS