stlink: correctly format printed hex addresses

[fw/openocd] / src / jtag / startup.tcl

diff --git a/src/jtag/startup.tcl b/src/jtag/startup.tcl
index 4e6d5fc181a15b9dc067cd793140c5bb3f933bcc..11a79779341488001978d030fbfc0379221642eb 100644 (file)
--- a/src/jtag/startup.tcl
+++ b/src/jtag/startup.tcl
@@ -30,7 +30,7 @@ proc init_reset { mode } {
 # documented nor supported except on ZY1000.
 
 proc power_restore {} {
-       puts "Sensed power restore, running reset init and halting GDB."
+       echo "Sensed power restore, running reset init and halting GDB."
        reset init
        
        # Halt GDB so user can deal with a detected power restore.
@@ -47,7 +47,7 @@ proc power_restore {} {
 add_help_text power_restore "Overridable procedure run when power restore is detected. Runs 'reset init' by default."
 
 proc power_dropout {} {
-       puts "Sensed power dropout."
+       echo "Sensed power dropout."
 }
 
 #########
@@ -56,7 +56,7 @@ proc power_dropout {} {
 # documented nor supported except on ZY1000.
 
 proc srst_deasserted {} {
-       puts "Sensed nSRST deasserted, running reset init and halting GDB."
+       echo "Sensed nSRST deasserted, running reset init and halting GDB."
        reset init
 
        # Halt GDB so user can deal with a detected reset.
@@ -73,5 +73,37 @@ proc srst_deasserted {} {
 add_help_text srst_deasserted "Overridable procedure run when srst deassert is detected. Runs 'reset init' by default."
 
 proc srst_asserted {} {
-       puts "Sensed nSRST asserted."
+       echo "Sensed nSRST asserted."
 }
+
+# measure actual JTAG clock
+proc measure_clk {} {
+       set start_time [ms];
+       runtest 10000000; 
+       echo "Running at more than [expr 10000.0 / ([ms]-$start_time)] kHz";
+}
+
+add_help_text measure_clk "Runs a test to measure the JTAG clk. Useful with RCLK / RTCK."
+
+# BEGIN MIGRATION AIDS ...  these adapter operations originally had
+# JTAG-specific names despite the fact that the operations were not
+# specific to JTAG, or otherewise had troublesome/misleading names.
+#
+# FIXME phase these aids out after about April 2011
+#
+proc jtag_khz args {
+       echo "DEPRECATED! use 'adapter_khz' not 'jtag_khz'"
+       eval adapter_khz $args
+}
+
+proc jtag_nsrst_delay args {
+       echo "DEPRECATED! use 'adapter_nsrst_delay' not 'jtag_nsrst_delay'"
+       eval adapter_nsrst_delay $args
+}
+
+proc jtag_nsrst_assert_width args {
+       echo "DEPRECATED! use 'adapter_nsrst_assert_width' not 'jtag_nsrst_assert_width'"
+       eval adapter_nsrst_assert_width $args
+}
+
+# END MIGRATION AIDS