* Copyright (C) 2008 by Spencer Oliver *
* spen@spen-soft.co.uk *
* *
+* Copyright (C) 2009 by SoftPLC Corporation. http://softplc.com *
+* Dick Hollenbeck <dick@softplc.com> *
+* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* found here:
* http://www.ftdichip.com/Documents/AppNotes/AN2232C-01_MPSSE_Cmnd.pdf
* Hereafter this is called the "MPSSE Spec".
+ *
+ * The datasheet for the ftdichip.com's FT2232D part is here:
+ * http://www.ftdichip.com/Documents/DataSheets/DS_FT2232D.pdf
*/
#include "config.h"
#endif
+/* project specific includes */
+#include "interface.h"
+#include "commands.h"
+#include "time_support.h"
+
#if IS_CYGWIN == 1
-#include "windows.h"
+#include <windows.h>
#endif
-#include "replacements.h"
+#include <assert.h>
-/* project specific includes */
-#include "log.h"
-#include "types.h"
-#include "jtag.h"
-#include "configuration.h"
-#include "time_support.h"
-
-/* system includes */
-#include <string.h>
-#include <stdlib.h>
-#include <unistd.h>
+#if (BUILD_FT2232_FTD2XX == 1 && BUILD_FT2232_LIBFTDI == 1)
+#error "BUILD_FT2232_FTD2XX && BUILD_FT2232_LIBFTDI are mutually exclusive"
+#elif (BUILD_FT2232_FTD2XX != 1 && BUILD_FT2232_LIBFTDI != 1)
+#error "BUILD_FT2232_FTD2XX || BUILD_FT2232_LIBFTDI must be chosen"
+#endif
/* FT2232 access library includes */
#if BUILD_FT2232_FTD2XX == 1
#include <ftdi.h>
#endif
+/* max TCK for the high speed devices 30000 kHz */
+#define FTDI_2232H_4232H_MAX_TCK 30000
+
static int ft2232_execute_queue(void);
static int ft2232_speed(int speed);
/**
- * Function ft2232_stableclocks
- * will send out \a num_cycles on the TCK line while the TAP(s)
- * are in a stable state. Calling code must ensure that current state is
- * stable, that verification is not done in here.
- * @param num_cycles is the count of clocks cycles to send.
- * @return int - ERROR_OK or ERROR_JTAG_QUEUE_FAILED
+ * Send out \a num_cycles on the TCK line while the TAP(s) are in a
+ * stable state. Calling code must ensure that current state is stable,
+ * that verification is not done in here.
+ *
+ * @param num_cycles The number of clocks cycles to send.
+ * @param cmd The command to send.
+ *
+ * @returns ERROR_OK on success, or ERROR_JTAG_QUEUE_FAILED on failure.
*/
static int ft2232_stableclocks(int num_cycles, jtag_command_t* cmd);
+/* max TCK for the high speed devices 30000 kHz */
+#define FTDI_2232H_4232H_MAX_TCK 30000
+
+static char * ft2232_device_desc_A = NULL;
+static char* ft2232_device_desc = NULL;
+static char* ft2232_serial = NULL;
+static char* ft2232_layout = NULL;
+static uint8_t ft2232_latency = 2;
+static unsigned ft2232_max_tck = 6000;
-static char * ft2232_device_desc_A = NULL;
-static char* ft2232_device_desc = NULL;
-static char* ft2232_serial = NULL;
-static char* ft2232_layout = NULL;
-static unsigned char ft2232_latency = 2;
#define MAX_USB_IDS 8
/* vid = pid = 0 marks the end of the list */
-static u16 ft2232_vid[MAX_USB_IDS + 1] = { 0x0403, 0 };
-static u16 ft2232_pid[MAX_USB_IDS + 1] = { 0x6010, 0 };
+static uint16_t ft2232_vid[MAX_USB_IDS + 1] = { 0x0403, 0 };
+static uint16_t ft2232_pid[MAX_USB_IDS + 1] = { 0x6010, 0 };
typedef struct ft2232_layout_s
{
} ft2232_layout_t;
/* init procedures for supported layouts */
-static int usbjtag_init(void);
-static int jtagkey_init(void);
-static int olimex_jtag_init(void);
-static int flyswatter_init(void);
-static int turtle_init(void);
-static int comstick_init(void);
-static int stm32stick_init(void);
-static int axm0432_jtag_init(void);
+static int usbjtag_init(void);
+static int jtagkey_init(void);
+static int olimex_jtag_init(void);
+static int flyswatter_init(void);
+static int turtle_init(void);
+static int comstick_init(void);
+static int stm32stick_init(void);
+static int axm0432_jtag_init(void);
static int sheevaplug_init(void);
static int icebear_jtag_init(void);
+static int cortino_jtag_init(void);
/* reset procedures for supported layouts */
static void usbjtag_reset(int trst, int srst);
static void flyswatter_jtag_blink(void);
static void turtle_jtag_blink(void);
-ft2232_layout_t ft2232_layouts[] =
+static const ft2232_layout_t ft2232_layouts[] =
{
{ "usbjtag", usbjtag_init, usbjtag_reset, NULL },
{ "jtagkey", jtagkey_init, jtagkey_reset, NULL },
{ "comstick", comstick_init, comstick_reset, NULL },
{ "stm32stick", stm32stick_init, stm32stick_reset, NULL },
{ "axm0432_jtag", axm0432_jtag_init, axm0432_jtag_reset, NULL },
- {"sheevaplug", sheevaplug_init, sheevaplug_reset, NULL },
+ { "sheevaplug", sheevaplug_init, sheevaplug_reset, NULL },
{ "icebear", icebear_jtag_init, icebear_jtag_reset, NULL },
+ { "cortino", cortino_jtag_init, comstick_reset, NULL },
{ NULL, NULL, NULL, NULL },
};
-static u8 nTRST, nTRSTnOE, nSRST, nSRSTnOE;
+static uint8_t nTRST, nTRSTnOE, nSRST, nSRSTnOE;
-static ft2232_layout_t* layout;
-static u8 low_output = 0x0;
-static u8 low_direction = 0x0;
-static u8 high_output = 0x0;
-static u8 high_direction = 0x0;
+static const ft2232_layout_t *layout;
+static uint8_t low_output = 0x0;
+static uint8_t low_direction = 0x0;
+static uint8_t high_output = 0x0;
+static uint8_t high_direction = 0x0;
#if BUILD_FT2232_FTD2XX == 1
-static FT_HANDLE ftdih = NULL;
+static FT_HANDLE ftdih = NULL;
+static FT_DEVICE ftdi_device = 0;
#elif BUILD_FT2232_LIBFTDI == 1
static struct ftdi_context ftdic;
#endif
static jtag_command_t* first_unsent; /* next command that has to be sent */
static int require_send;
-static u8* ft2232_buffer = NULL;
+
+/* http://urjtag.wiki.sourceforge.net/Cable + FT2232 says:
+
+ "There is a significant difference between libftdi and libftd2xx. The latter
+ one allows to schedule up to 64*64 bytes of result data while libftdi fails
+ with more than 4*64. As a consequence, the FT2232 driver is forced to
+ perform around 16x more USB transactions for long command streams with TDO
+ capture when running with libftdi."
+
+ No idea how we get
+ #define FT2232_BUFFER_SIZE 131072
+ a comment would have been nice.
+*/
+
+#define FT2232_BUFFER_SIZE 131072
+
+static uint8_t* ft2232_buffer = NULL;
static int ft2232_buffer_size = 0;
static int ft2232_read_pointer = 0;
static int ft2232_expect_read = 0;
-#define FT2232_BUFFER_SIZE 131072
-#define BUFFER_ADD ft2232_buffer[ft2232_buffer_size++]
-#define BUFFER_READ ft2232_buffer[ft2232_read_pointer++]
+/**
+ * Function buffer_write
+ * writes a byte into the byte buffer, "ft2232_buffer", which must be sent later.
+ * @param val is the byte to send.
+ */
+static inline void buffer_write(uint8_t val)
+{
+ assert(ft2232_buffer);
+ assert((unsigned) ft2232_buffer_size < (unsigned) FT2232_BUFFER_SIZE);
+ ft2232_buffer[ft2232_buffer_size++] = val;
+}
+
+/**
+ * Function buffer_read
+ * returns a byte from the byte buffer.
+ */
+static inline uint8_t buffer_read(void)
+{
+ assert(ft2232_buffer);
+ assert(ft2232_read_pointer < ft2232_buffer_size);
+ return ft2232_buffer[ft2232_read_pointer++];
+}
+
+
+/**
+ * Clocks out \a bit_count bits on the TMS line, starting with the least
+ * significant bit of tms_bits and progressing to more significant bits.
+ * Rigorous state transition logging is done here via tap_set_state().
+ *
+ * @param mpsse_cmd One of the MPSSE TMS oriented commands such as
+ * 0x4b or 0x6b. See the MPSSE spec referenced above for their
+ * functionality. The MPSSE command "Clock Data to TMS/CS Pin (no Read)"
+ * is often used for this, 0x4b.
+ *
+ * @param tms_bits Holds the sequence of bits to send.
+ * @param tms_count Tells how many bits in the sequence.
+ * @param tdi_bit A single bit to pass on to TDI before the first TCK
+ * cycle and held static for the duration of TMS clocking.
+ *
+ * See the MPSSE spec referenced above.
+ */
+static void clock_tms(uint8_t mpsse_cmd, int tms_bits, int tms_count, bool tdi_bit)
+{
+ uint8_t tms_byte;
+ int i;
+ int tms_ndx; /* bit index into tms_byte */
+
+ assert(tms_count > 0);
+
+// LOG_DEBUG("mpsse cmd=%02x, tms_bits = 0x%08x, bit_count=%d", mpsse_cmd, tms_bits, tms_count);
+
+ for (tms_byte = tms_ndx = i = 0; i < tms_count; ++i, tms_bits>>=1)
+ {
+ bool bit = tms_bits & 1;
+
+ if (bit)
+ tms_byte |= (1 << tms_ndx);
+
+ /* always do state transitions in public view */
+ tap_set_state(tap_state_transition(tap_get_state(), bit));
+
+ /* we wrote a bit to tms_byte just above, increment bit index. if bit was zero
+ also increment.
+ */
+ ++tms_ndx;
+
+ if (tms_ndx == 7 || i == tms_count-1)
+ {
+ buffer_write(mpsse_cmd);
+ buffer_write(tms_ndx - 1);
+
+ /* Bit 7 of the byte is passed on to TDI/DO before the first TCK/SK of
+ TMS/CS and is held static for the duration of TMS/CS clocking.
+ */
+ buffer_write(tms_byte | (tdi_bit << 7));
+ }
+ }
+}
+
+
+/**
+ * Function get_tms_buffer_requirements
+ * returns what clock_tms() will consume if called with
+ * same \a bit_count.
+ */
+static inline int get_tms_buffer_requirements(int bit_count)
+{
+ return ((bit_count + 6)/7) * 3;
+}
+
+
+/**
+ * Function move_to_state
+ * moves the TAP controller from the current state to a
+ * \a goal_state through a path given by tap_get_tms_path(). State transition
+ * logging is performed by delegation to clock_tms().
+ *
+ * @param goal_state is the destination state for the move.
+ */
+static void move_to_state(tap_state_t goal_state)
+{
+ tap_state_t start_state = tap_get_state();
+
+ /* goal_state is 1/2 of a tuple/pair of states which allow convenient
+ lookup of the required TMS pattern to move to this state from the
+ start state.
+ */
+
+ /* do the 2 lookups */
+ int tms_bits = tap_get_tms_path(start_state, goal_state);
+ int tms_count = tap_get_tms_path_len(start_state, goal_state);
+
+ DEBUG_JTAG_IO("start=%s goal=%s", tap_state_name(start_state), tap_state_name(goal_state));
+
+ clock_tms(0x4b, tms_bits, tms_count, 0);
+}
+
jtag_interface_t ft2232_interface =
{
- .name = "ft2232",
- .execute_queue = ft2232_execute_queue,
- .speed = ft2232_speed,
- .speed_div = ft2232_speed_div,
- .khz = ft2232_khz,
- .register_commands = ft2232_register_commands,
- .init = ft2232_init,
- .quit = ft2232_quit,
+ .name = "ft2232",
+ .execute_queue = ft2232_execute_queue,
+ .speed = ft2232_speed,
+ .speed_div = ft2232_speed_div,
+ .khz = ft2232_khz,
+ .register_commands = ft2232_register_commands,
+ .init = ft2232_init,
+ .quit = ft2232_quit,
};
-static int ft2232_write(u8* buf, int size, u32* bytes_written)
+static int ft2232_write(uint8_t* buf, int size, uint32_t* bytes_written)
{
#if BUILD_FT2232_FTD2XX == 1
FT_STATUS status;
- DWORD dw_bytes_written;
- if ( ( status = FT_Write(ftdih, buf, size, &dw_bytes_written) ) != FT_OK )
+ DWORD dw_bytes_written;
+ if ((status = FT_Write(ftdih, buf, size, &dw_bytes_written)) != FT_OK)
{
*bytes_written = dw_bytes_written;
LOG_ERROR("FT_Write returned: %lu", status);
}
#elif BUILD_FT2232_LIBFTDI == 1
int retval;
- if ( ( retval = ftdi_write_data(&ftdic, buf, size) ) < 0 )
+ if ((retval = ftdi_write_data(&ftdic, buf, size)) < 0)
{
*bytes_written = 0;
- LOG_ERROR( "ftdi_write_data: %s", ftdi_get_error_string(&ftdic) );
+ LOG_ERROR("ftdi_write_data: %s", ftdi_get_error_string(&ftdic));
return ERROR_JTAG_DEVICE_ERROR;
}
else
}
-static int ft2232_read(u8* buf, u32 size, u32* bytes_read)
+static int ft2232_read(uint8_t* buf, uint32_t size, uint32_t* bytes_read)
{
#if BUILD_FT2232_FTD2XX == 1
DWORD dw_bytes_read;
int timeout = 5;
*bytes_read = 0;
- while ( (*bytes_read < size) && timeout-- )
+ while ((*bytes_read < size) && timeout--)
{
- if ( ( status = FT_Read(ftdih, buf + *bytes_read, size -
- *bytes_read, &dw_bytes_read) ) != FT_OK )
+ if ((status = FT_Read(ftdih, buf + *bytes_read, size -
+ *bytes_read, &dw_bytes_read)) != FT_OK)
{
*bytes_read = 0;
LOG_ERROR("FT_Read returned: %lu", status);
int timeout = 100;
*bytes_read = 0;
- while ( (*bytes_read < size) && timeout-- )
+ while ((*bytes_read < size) && timeout--)
{
- if ( ( retval = ftdi_read_data(&ftdic, buf + *bytes_read, size - *bytes_read) ) < 0 )
+ if ((retval = ftdi_read_data(&ftdic, buf + *bytes_read, size - *bytes_read)) < 0)
{
*bytes_read = 0;
- LOG_ERROR( "ftdi_read_data: %s", ftdi_get_error_string(&ftdic) );
+ LOG_ERROR("ftdi_read_data: %s", ftdi_get_error_string(&ftdic));
return ERROR_JTAG_DEVICE_ERROR;
}
*bytes_read += retval;
if (*bytes_read < size)
{
- LOG_ERROR("couldn't read the requested number of bytes from FT2232 device (%i < %i)", *bytes_read, size);
+ LOG_ERROR("couldn't read the requested number of bytes from FT2232 device (%i < %i)",
+ (unsigned int)(*bytes_read),
+ (unsigned int)size);
return ERROR_JTAG_DEVICE_ERROR;
}
return ERROR_OK;
}
+#ifdef BUILD_FTD2XX_HIGHSPEED
+static bool ft2232_device_is_highspeed(void)
+{
+ return (ftdi_device == FT_DEVICE_2232H) || (ftdi_device == FT_DEVICE_4232H);
+}
+
+static int ft2232_adaptive_clocking(int speed)
+{
+ bool use_adaptive_clocking = FALSE;
+ if (0 == speed)
+ {
+ if (ft2232_device_is_highspeed())
+ use_adaptive_clocking = TRUE;
+ else
+ {
+ LOG_ERROR("ft2232 device %lu does not support RTCK", ftdi_device);
+ return ERROR_OK;
+ }
+ }
+
+ uint8_t buf = use_adaptive_clocking ? 0x96 : 0x97;
+ LOG_DEBUG("%2.2x", buf);
+
+ uint32_t bytes_written;
+ int retval = ft2232_write(&buf, 1, &bytes_written);
+ if (ERROR_OK != retval || bytes_written != 1)
+ {
+ LOG_ERROR("unable to set adative clocking: %d", retval);
+ return retval;
+ }
+
+ return ERROR_OK;
+}
+#else
+static int ft2232_adaptive_clocking(int speed)
+{
+ // not implemented on low-speed devices
+ return speed ? ERROR_OK : -1234;
+}
+#endif
static int ft2232_speed(int speed)
{
- u8 buf[3];
+ uint8_t buf[3];
int retval;
- u32 bytes_written;
+ uint32_t bytes_written;
+
+ ft2232_adaptive_clocking(speed);
- buf[0] = 0x86; /* command "set divisor" */
- buf[1] = speed & 0xff; /* valueL (0=6MHz, 1=3MHz, 2=2.0MHz, ...*/
+ buf[0] = 0x86; /* command "set divisor" */
+ buf[1] = speed & 0xff; /* valueL (0 = 6MHz, 1 = 3MHz, 2 = 2.0MHz, ...*/
buf[2] = (speed >> 8) & 0xff; /* valueH */
LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
- if ( ( ( retval = ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) )
+ if (((retval = ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
{
LOG_ERROR("couldn't set FT2232 TCK speed");
return retval;
* AN2232C-01 Command Processor for
* MPSSE and MCU Host Bus. Chapter 3.8 */
- *khz = 6000 / (1 + speed);
+ *khz = ft2232_max_tck / (1 + speed);
return ERROR_OK;
}
static int ft2232_khz(int khz, int* jtag_speed)
{
- if (khz==0)
+ if (khz == 0)
{
- LOG_ERROR("RCLK not supported");
+#ifdef BUILD_FTD2XX_HIGHSPEED
+ *jtag_speed = 0;
+ return ERROR_OK;
+#else
+ LOG_DEBUG("RCLK not supported");
+ LOG_DEBUG("If you have a high-speed FTDI device, then "
+ "OpenOCD may be built with --enable-ftd2xx-highspeed.");
return ERROR_FAIL;
+#endif
}
/* Take a look in the FT2232 manual,
* We will calc here with a multiplier
* of 10 for better rounding later. */
- /* Calc speed, (6000 / khz) - 1 */
+ /* Calc speed, (ft2232_max_tck / khz) - 1 */
/* Use 65000 for better rounding */
- *jtag_speed = (60000 / khz) - 10;
+ *jtag_speed = ((ft2232_max_tck*10) / khz) - 10;
/* Add 0.9 for rounding */
*jtag_speed += 9;
}
-void ft2232_end_state(tap_state_t state)
+static void ft2232_end_state(tap_state_t state)
{
if (tap_is_state_stable(state))
tap_set_end_state(state);
else
{
- LOG_ERROR("BUG: %i is not a valid end state", state);
+ LOG_ERROR("BUG: %s is not a stable end state", tap_state_name(state));
exit(-1);
}
}
-
-static void ft2232_read_scan(enum scan_type type, u8* buffer, int scan_size)
+static void ft2232_read_scan(enum scan_type type, uint8_t* buffer, int scan_size)
{
int num_bytes = (scan_size + 7) / 8;
int bits_left = scan_size;
while (num_bytes-- > 1)
{
- buffer[cur_byte] = BUFFER_READ;
- cur_byte++;
+ buffer[cur_byte++] = buffer_read();
bits_left -= 8;
}
buffer[cur_byte] = 0x0;
+ /* There is one more partial byte left from the clock data in/out instructions */
if (bits_left > 1)
{
- buffer[cur_byte] = BUFFER_READ >> 1;
+ buffer[cur_byte] = buffer_read() >> 1;
}
-
- buffer[cur_byte] = ( buffer[cur_byte] | ( (BUFFER_READ & 0x02) << 6 ) ) >> (8 - bits_left);
+ /* This shift depends on the length of the clock data to tms instruction, insterted at end of the scan, now fixed to a two step transition in ft2232_add_scan */
+ buffer[cur_byte] = (buffer[cur_byte] | (((buffer_read()) << 1) & 0x80)) >> (8 - bits_left);
}
static int ft2232_send_and_recv(jtag_command_t* first, jtag_command_t* last)
{
jtag_command_t* cmd;
- u8* buffer;
+ uint8_t* buffer;
int scan_size;
enum scan_type type;
int retval;
- u32 bytes_written=0;
- u32 bytes_read=0;
+ uint32_t bytes_written = 0;
+ uint32_t bytes_read = 0;
#ifdef _DEBUG_USB_IO_
struct timeval start, inter, inter2, end;
gettimeofday(&start, NULL);
#endif
- if ( ( retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written) ) != ERROR_OK )
+ if ((retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written)) != ERROR_OK)
{
LOG_ERROR("couldn't write MPSSE commands to FT2232");
return retval;
gettimeofday(&inter2, NULL);
#endif
- if ( ( retval = ft2232_read(ft2232_buffer, ft2232_expect_read, &bytes_read) ) != ERROR_OK )
+ if ((retval = ft2232_read(ft2232_buffer, ft2232_expect_read, &bytes_read)) != ERROR_OK)
{
LOG_ERROR("couldn't read from FT2232");
return retval;
}
-static void ft2232_add_pathmove(pathmove_command_t* cmd)
+/**
+ * Function ft2232_add_pathmove
+ * moves the TAP controller from the current state to a new state through the
+ * given path, where path is an array of tap_state_t's.
+ *
+ * @param path is an array of tap_stat_t which gives the states to traverse through
+ * ending with the last state at path[num_states-1]
+ * @param num_states is the count of state steps to move through
+ */
+static void ft2232_add_pathmove(tap_state_t* path, int num_states)
{
- int num_states = cmd->num_states;
- int state_count = 0;
-
- while (num_states)
- {
- u8 tms_byte = 0; /* zero this on each MPSSE batch */
-
- int bit_count = 0;
+ int tms_bits = 0;
+ int state_ndx;
+ tap_state_t walker = tap_get_state();
- int num_states_batch = num_states > 7 ? 7 : num_states;
+ assert((unsigned) num_states <= 32u); /* tms_bits only holds 32 bits */
- /* command "Clock Data to TMS/CS Pin (no Read)" */
- BUFFER_ADD = 0x4b;
-
- /* number of states remaining */
- BUFFER_ADD = num_states_batch - 1;
+ /* this loop verifies that the path is legal and logs each state in the path */
+ for (state_ndx = 0; state_ndx < num_states; ++state_ndx)
+ {
+ tap_state_t desired_next_state = path[state_ndx];
- while (num_states_batch--)
+ if (tap_state_transition(walker, false) == desired_next_state)
+ ; /* bit within tms_bits at index state_ndx is already zero */
+ else if (tap_state_transition(walker, true) == desired_next_state)
+ tms_bits |= (1 << state_ndx);
+ else
{
- if (tap_state_transition(tap_get_state(), false) == cmd->path[state_count])
- buf_set_u32(&tms_byte, bit_count++, 1, 0x0);
- else if (tap_state_transition(tap_get_state(), true) == cmd->path[state_count])
- buf_set_u32(&tms_byte, bit_count++, 1, 0x1);
- else
- {
- LOG_ERROR( "BUG: %s -> %s isn't a valid TAP transition", tap_state_name(
- tap_get_state() ), tap_state_name(cmd->path[state_count]) );
- exit(-1);
- }
-
- tap_set_state(cmd->path[state_count]);
- state_count++;
- num_states--;
+ LOG_ERROR("BUG: %s -> %s isn't a valid TAP transition",
+ tap_state_name(walker), tap_state_name(desired_next_state));
+ exit(-1);
}
- BUFFER_ADD = tms_byte;
+ walker = desired_next_state;
}
-
+
+ clock_tms(0x4b, tms_bits, num_states, 0);
+
tap_set_end_state(tap_get_state());
}
-void ft2232_add_scan(int ir_scan, enum scan_type type, u8* buffer, int scan_size)
+static void ft2232_add_scan(bool ir_scan, enum scan_type type, uint8_t* buffer, int scan_size)
{
int num_bytes = (scan_size + 7) / 8;
int bits_left = scan_size;
int cur_byte = 0;
int last_bit;
- if ( !( ( !ir_scan && (tap_get_state() == TAP_DRSHIFT) )
- || ( ir_scan && (tap_get_state() == TAP_IRSHIFT) ) ) )
+ if (!ir_scan)
{
- /* command "Clock Data to TMS/CS Pin (no Read)" */
- BUFFER_ADD = 0x4b;
-
- BUFFER_ADD = 0x6; /* scan 7 bits */
-
- /* TMS data bits */
- if (ir_scan)
+ if (tap_get_state() != TAP_DRSHIFT)
{
- BUFFER_ADD = tap_get_tms_path(tap_get_state(), TAP_IRSHIFT);
- tap_set_state(TAP_IRSHIFT);
+ move_to_state(TAP_DRSHIFT);
}
- else
+ }
+ else
+ {
+ if (tap_get_state() != TAP_IRSHIFT)
{
- BUFFER_ADD = tap_get_tms_path(tap_get_state(), TAP_DRSHIFT);
- tap_set_state(TAP_DRSHIFT);
+ move_to_state(TAP_IRSHIFT);
}
- /* LOG_DEBUG("added TMS scan (no read)"); */
}
/* add command for complete bytes */
if (type == SCAN_IO)
{
/* Clock Data Bytes In and Out LSB First */
- BUFFER_ADD = 0x39;
+ buffer_write(0x39);
/* LOG_DEBUG("added TDI bytes (io %i)", num_bytes); */
}
else if (type == SCAN_OUT)
{
/* Clock Data Bytes Out on -ve Clock Edge LSB First (no Read) */
- BUFFER_ADD = 0x19;
+ buffer_write(0x19);
/* LOG_DEBUG("added TDI bytes (o)"); */
}
else if (type == SCAN_IN)
{
/* Clock Data Bytes In on +ve Clock Edge LSB First (no Write) */
- BUFFER_ADD = 0x28;
+ buffer_write(0x28);
/* LOG_DEBUG("added TDI bytes (i %i)", num_bytes); */
}
thisrun_bytes = (num_bytes > 65537) ? 65536 : (num_bytes - 1);
num_bytes -= thisrun_bytes;
- BUFFER_ADD = (thisrun_bytes - 1) & 0xff;
- BUFFER_ADD = ( (thisrun_bytes - 1) >> 8 ) & 0xff;
+
+ buffer_write((uint8_t) (thisrun_bytes - 1));
+ buffer_write((uint8_t) ((thisrun_bytes - 1) >> 8));
if (type != SCAN_IN)
{
/* add complete bytes */
while (thisrun_bytes-- > 0)
{
- BUFFER_ADD = buffer[cur_byte];
- cur_byte++;
+ buffer_write(buffer[cur_byte++]);
bits_left -= 8;
}
}
/* the most signifcant bit is scanned during TAP movement */
if (type != SCAN_IN)
- last_bit = ( buffer[cur_byte] >> (bits_left - 1) ) & 0x1;
+ last_bit = (buffer[cur_byte] >> (bits_left - 1)) & 0x1;
else
last_bit = 0;
if (type == SCAN_IO)
{
/* Clock Data Bits In and Out LSB First */
- BUFFER_ADD = 0x3b;
+ buffer_write(0x3b);
/* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */
}
else if (type == SCAN_OUT)
{
/* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */
- BUFFER_ADD = 0x1b;
+ buffer_write(0x1b);
/* LOG_DEBUG("added TDI bits (o)"); */
}
else if (type == SCAN_IN)
{
/* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */
- BUFFER_ADD = 0x2a;
+ buffer_write(0x2a);
/* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */
}
- BUFFER_ADD = bits_left - 2;
+
+ buffer_write(bits_left - 2);
if (type != SCAN_IN)
- BUFFER_ADD = buffer[cur_byte];
+ buffer_write(buffer[cur_byte]);
}
- if ( ( ir_scan && (tap_get_end_state() == TAP_IRSHIFT) )
- || ( !ir_scan && (tap_get_end_state() == TAP_DRSHIFT) ) )
+ if ((ir_scan && (tap_get_end_state() == TAP_IRSHIFT))
+ || (!ir_scan && (tap_get_end_state() == TAP_DRSHIFT)))
{
if (type == SCAN_IO)
{
/* Clock Data Bits In and Out LSB First */
- BUFFER_ADD = 0x3b;
+ buffer_write(0x3b);
/* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */
}
else if (type == SCAN_OUT)
{
/* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */
- BUFFER_ADD = 0x1b;
+ buffer_write(0x1b);
/* LOG_DEBUG("added TDI bits (o)"); */
}
else if (type == SCAN_IN)
{
/* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */
- BUFFER_ADD = 0x2a;
+ buffer_write(0x2a);
/* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */
}
- BUFFER_ADD = 0x0;
- BUFFER_ADD = last_bit;
+ buffer_write(0x0);
+ buffer_write(last_bit);
}
else
{
+ int tms_bits;
+ int tms_count;
+ uint8_t mpsse_cmd;
+
/* move from Shift-IR/DR to end state */
if (type != SCAN_OUT)
{
+ /* We always go to the PAUSE state in two step at the end of an IN or IO scan */
+ /* This must be coordinated with the bit shifts in ft2232_read_scan */
+ tms_bits = 0x01;
+ tms_count = 2;
/* Clock Data to TMS/CS Pin with Read */
- BUFFER_ADD = 0x6b;
+ mpsse_cmd = 0x6b;
/* LOG_DEBUG("added TMS scan (read)"); */
}
else
{
+ tms_bits = tap_get_tms_path(tap_get_state(), tap_get_end_state());
+ tms_count = tap_get_tms_path_len(tap_get_state(), tap_get_end_state());
/* Clock Data to TMS/CS Pin (no Read) */
- BUFFER_ADD = 0x4b;
+ mpsse_cmd = 0x4b;
/* LOG_DEBUG("added TMS scan (no read)"); */
}
- BUFFER_ADD = 0x6; /* scan 7 bits */
- BUFFER_ADD = tap_get_tms_path( tap_get_state(), tap_get_end_state() ) | (last_bit << 7);
- tap_set_state( tap_get_end_state() );
+ clock_tms(mpsse_cmd, tms_bits, tms_count, last_bit);
+ }
+
+ if (tap_get_state() != tap_get_end_state())
+ {
+ move_to_state(tap_get_end_state());
}
}
-static int ft2232_large_scan(scan_command_t* cmd, enum scan_type type, u8* buffer, int scan_size)
+static int ft2232_large_scan(scan_command_t* cmd, enum scan_type type, uint8_t* buffer, int scan_size)
{
int num_bytes = (scan_size + 7) / 8;
int bits_left = scan_size;
int cur_byte = 0;
int last_bit;
- u8* receive_buffer = malloc( CEIL(scan_size, 8) );
- u8* receive_pointer = receive_buffer;
- u32 bytes_written;
- u32 bytes_read;
+ uint8_t* receive_buffer = malloc(CEIL(scan_size, 8));
+ uint8_t* receive_pointer = receive_buffer;
+ uint32_t bytes_written;
+ uint32_t bytes_read;
int retval;
int thisrun_read = 0;
if (tap_get_state() != TAP_DRSHIFT)
{
- /* command "Clock Data to TMS/CS Pin (no Read)" */
- BUFFER_ADD = 0x4b;
-
- BUFFER_ADD = 0x6; /* scan 7 bits */
-
- /* TMS data bits */
- BUFFER_ADD = tap_get_tms_path(tap_get_state(), TAP_DRSHIFT);
- tap_set_state(TAP_DRSHIFT);
+ move_to_state(TAP_DRSHIFT);
}
- if ( ( retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written) ) != ERROR_OK )
+ if ((retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written)) != ERROR_OK)
{
LOG_ERROR("couldn't write MPSSE commands to FT2232");
exit(-1);
}
- LOG_DEBUG("ft2232_buffer_size: %i, bytes_written: %i", ft2232_buffer_size, bytes_written);
+ LOG_DEBUG("ft2232_buffer_size: %i, bytes_written: %i",
+ ft2232_buffer_size, (int)bytes_written);
ft2232_buffer_size = 0;
/* add command for complete bytes */
if (type == SCAN_IO)
{
/* Clock Data Bytes In and Out LSB First */
- BUFFER_ADD = 0x39;
+ buffer_write(0x39);
/* LOG_DEBUG("added TDI bytes (io %i)", num_bytes); */
}
else if (type == SCAN_OUT)
{
/* Clock Data Bytes Out on -ve Clock Edge LSB First (no Read) */
- BUFFER_ADD = 0x19;
+ buffer_write(0x19);
/* LOG_DEBUG("added TDI bytes (o)"); */
}
else if (type == SCAN_IN)
{
/* Clock Data Bytes In on +ve Clock Edge LSB First (no Write) */
- BUFFER_ADD = 0x28;
+ buffer_write(0x28);
/* LOG_DEBUG("added TDI bytes (i %i)", num_bytes); */
}
thisrun_bytes = (num_bytes > 65537) ? 65536 : (num_bytes - 1);
thisrun_read = thisrun_bytes;
num_bytes -= thisrun_bytes;
- BUFFER_ADD = (thisrun_bytes - 1) & 0xff;
- BUFFER_ADD = ( (thisrun_bytes - 1) >> 8 ) & 0xff;
+ buffer_write((uint8_t) (thisrun_bytes - 1));
+ buffer_write((uint8_t) ((thisrun_bytes - 1) >> 8));
if (type != SCAN_IN)
{
/* add complete bytes */
while (thisrun_bytes-- > 0)
{
- BUFFER_ADD = buffer[cur_byte];
+ buffer_write(buffer[cur_byte]);
cur_byte++;
bits_left -= 8;
}
bits_left -= 8 * (thisrun_bytes);
}
- if ( ( retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written) ) != ERROR_OK )
+ if ((retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written)) != ERROR_OK)
{
LOG_ERROR("couldn't write MPSSE commands to FT2232");
exit(-1);
}
- LOG_DEBUG("ft2232_buffer_size: %i, bytes_written: %i", ft2232_buffer_size, bytes_written);
+ LOG_DEBUG("ft2232_buffer_size: %i, bytes_written: %i",
+ ft2232_buffer_size,
+ (int)bytes_written);
ft2232_buffer_size = 0;
if (type != SCAN_OUT)
{
- if ( ( retval = ft2232_read(receive_pointer, thisrun_read, &bytes_read) ) != ERROR_OK )
+ if ((retval = ft2232_read(receive_pointer, thisrun_read, &bytes_read)) != ERROR_OK)
{
LOG_ERROR("couldn't read from FT2232");
exit(-1);
}
- LOG_DEBUG("thisrun_read: %i, bytes_read: %i", thisrun_read, bytes_read);
+ LOG_DEBUG("thisrun_read: %i, bytes_read: %i",
+ thisrun_read,
+ (int)bytes_read);
receive_pointer += bytes_read;
}
}
/* the most signifcant bit is scanned during TAP movement */
if (type != SCAN_IN)
- last_bit = ( buffer[cur_byte] >> (bits_left - 1) ) & 0x1;
+ last_bit = (buffer[cur_byte] >> (bits_left - 1)) & 0x1;
else
last_bit = 0;
if (type == SCAN_IO)
{
/* Clock Data Bits In and Out LSB First */
- BUFFER_ADD = 0x3b;
+ buffer_write(0x3b);
/* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */
}
else if (type == SCAN_OUT)
{
/* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */
- BUFFER_ADD = 0x1b;
+ buffer_write(0x1b);
/* LOG_DEBUG("added TDI bits (o)"); */
}
else if (type == SCAN_IN)
{
/* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */
- BUFFER_ADD = 0x2a;
+ buffer_write(0x2a);
/* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */
}
- BUFFER_ADD = bits_left - 2;
+ buffer_write(bits_left - 2);
if (type != SCAN_IN)
- BUFFER_ADD = buffer[cur_byte];
+ buffer_write(buffer[cur_byte]);
if (type != SCAN_OUT)
thisrun_read += 2;
if (type == SCAN_IO)
{
/* Clock Data Bits In and Out LSB First */
- BUFFER_ADD = 0x3b;
+ buffer_write(0x3b);
/* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */
}
else if (type == SCAN_OUT)
{
/* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */
- BUFFER_ADD = 0x1b;
+ buffer_write(0x1b);
/* LOG_DEBUG("added TDI bits (o)"); */
}
else if (type == SCAN_IN)
{
/* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */
- BUFFER_ADD = 0x2a;
+ buffer_write(0x2a);
/* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */
}
- BUFFER_ADD = 0x0;
- BUFFER_ADD = last_bit;
+ buffer_write(0x0);
+ buffer_write(last_bit);
}
else
{
+ int tms_bits = tap_get_tms_path(tap_get_state(), tap_get_end_state());
+ int tms_count = tap_get_tms_path_len(tap_get_state(), tap_get_end_state());
+ uint8_t mpsse_cmd;
+
/* move from Shift-IR/DR to end state */
if (type != SCAN_OUT)
{
/* Clock Data to TMS/CS Pin with Read */
- BUFFER_ADD = 0x6b;
+ mpsse_cmd = 0x6b;
/* LOG_DEBUG("added TMS scan (read)"); */
}
else
{
/* Clock Data to TMS/CS Pin (no Read) */
- BUFFER_ADD = 0x4b;
+ mpsse_cmd = 0x4b;
/* LOG_DEBUG("added TMS scan (no read)"); */
}
- BUFFER_ADD = 0x6;
- BUFFER_ADD = tap_get_tms_path( tap_get_state(), tap_get_end_state() ) | (last_bit << 7);
- tap_set_state( tap_get_end_state() );
+
+ clock_tms(mpsse_cmd, tms_bits, tms_count, last_bit);
}
if (type != SCAN_OUT)
thisrun_read += 1;
- if ( ( retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written) ) != ERROR_OK )
+ if ((retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written)) != ERROR_OK)
{
LOG_ERROR("couldn't write MPSSE commands to FT2232");
exit(-1);
}
- LOG_DEBUG("ft2232_buffer_size: %i, bytes_written: %i", ft2232_buffer_size, bytes_written);
+ LOG_DEBUG("ft2232_buffer_size: %i, bytes_written: %i",
+ ft2232_buffer_size,
+ (int)bytes_written);
ft2232_buffer_size = 0;
if (type != SCAN_OUT)
{
- if ( ( retval = ft2232_read(receive_pointer, thisrun_read, &bytes_read) ) != ERROR_OK )
+ if ((retval = ft2232_read(receive_pointer, thisrun_read, &bytes_read)) != ERROR_OK)
{
LOG_ERROR("couldn't read from FT2232");
exit(-1);
}
- LOG_DEBUG("thisrun_read: %i, bytes_read: %i", thisrun_read, bytes_read);
+ LOG_DEBUG("thisrun_read: %i, bytes_read: %i",
+ thisrun_read,
+ (int)bytes_read);
receive_pointer += bytes_read;
}
int num_bytes = (scan_size - 1) / 8;
if (tap_get_state() != TAP_DRSHIFT)
- predicted_size += 3;
+ predicted_size += get_tms_buffer_requirements(tap_get_tms_path_len(tap_get_state(), TAP_DRSHIFT));
if (type == SCAN_IN) /* only from device to host */
{
/* complete bytes */
predicted_size += CEIL(num_bytes, 65536) * 3;
+
/* remaining bits - 1 (up to 7) */
- predicted_size += ( (scan_size - 1) % 8 ) ? 2 : 0;
+ predicted_size += ((scan_size - 1) % 8) ? 2 : 0;
}
else /* host to device, or bidirectional */
{
/* complete bytes */
predicted_size += num_bytes + CEIL(num_bytes, 65536) * 3;
+
/* remaining bits -1 (up to 7) */
- predicted_size += ( (scan_size - 1) % 8 ) ? 3 : 0;
+ predicted_size += ((scan_size - 1) % 8) ? 3 : 0;
}
return predicted_size;
predicted_size += (CEIL(scan_size, 8) > 1) ? (CEIL(scan_size, 8) - 1) : 0;
/* remaining bits - 1 */
- predicted_size += ( (scan_size - 1) % 8 ) ? 1 : 0;
+ predicted_size += ((scan_size - 1) % 8) ? 1 : 0;
/* last bit (from TMS scan) */
predicted_size += 1;
static void usbjtag_reset(int trst, int srst)
{
+ enum reset_types jtag_reset_config = jtag_get_reset_config();
if (trst == 1)
{
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
}
/* command "set data bits low byte" */
- BUFFER_ADD = 0x80;
- BUFFER_ADD = low_output;
- BUFFER_ADD = low_direction;
+ buffer_write(0x80);
+ buffer_write(low_output);
+ buffer_write(low_direction);
}
static void jtagkey_reset(int trst, int srst)
{
+ enum reset_types jtag_reset_config = jtag_get_reset_config();
if (trst == 1)
{
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
}
/* command "set data bits high byte" */
- BUFFER_ADD = 0x82;
- BUFFER_ADD = high_output;
- BUFFER_ADD = high_direction;
+ buffer_write(0x82);
+ buffer_write(high_output);
+ buffer_write(high_direction);
LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output,
high_direction);
}
static void olimex_jtag_reset(int trst, int srst)
{
+ enum reset_types jtag_reset_config = jtag_get_reset_config();
if (trst == 1)
{
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
}
/* command "set data bits high byte" */
- BUFFER_ADD = 0x82;
- BUFFER_ADD = high_output;
- BUFFER_ADD = high_direction;
+ buffer_write(0x82);
+ buffer_write(high_output);
+ buffer_write(high_direction);
LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output,
high_direction);
}
}
/* command "set data bits low byte" */
- BUFFER_ADD = 0x82;
- BUFFER_ADD = high_output;
- BUFFER_ADD = high_direction;
+ buffer_write(0x82);
+ buffer_write(high_output);
+ buffer_write(high_direction);
LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output,
high_direction);
}
}
/* command "set data bits low byte" */
- BUFFER_ADD = 0x80;
- BUFFER_ADD = low_output;
- BUFFER_ADD = low_direction;
+ buffer_write(0x80);
+ buffer_write(low_output);
+ buffer_write(low_direction);
LOG_DEBUG("trst: %i, srst: %i, low_output: 0x%2.2x, low_direction: 0x%2.2x", trst, srst, low_output, low_direction);
}
}
/* command "set data bits low byte" */
- BUFFER_ADD = 0x80;
- BUFFER_ADD = low_output;
- BUFFER_ADD = low_direction;
+ buffer_write(0x80);
+ buffer_write(low_output);
+ buffer_write(low_direction);
LOG_DEBUG("srst: %i, low_output: 0x%2.2x, low_direction: 0x%2.2x", srst, low_output, low_direction);
}
}
/* command "set data bits high byte" */
- BUFFER_ADD = 0x82;
- BUFFER_ADD = high_output;
- BUFFER_ADD = high_direction;
+ buffer_write(0x82);
+ buffer_write(high_output);
+ buffer_write(high_direction);
LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output,
high_direction);
}
}
/* command "set data bits low byte" */
- BUFFER_ADD = 0x80;
- BUFFER_ADD = low_output;
- BUFFER_ADD = low_direction;
+ buffer_write(0x80);
+ buffer_write(low_output);
+ buffer_write(low_direction);
/* command "set data bits high byte" */
- BUFFER_ADD = 0x82;
- BUFFER_ADD = high_output;
- BUFFER_ADD = high_direction;
+ buffer_write(0x82);
+ buffer_write(high_output);
+ buffer_write(high_direction);
LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output,
high_direction);
}
high_output |= nSRSTnOE;
/* command "set data bits high byte" */
- BUFFER_ADD = 0x82;
- BUFFER_ADD = high_output;
- BUFFER_ADD = high_direction;
+ buffer_write(0x82);
+ buffer_write(high_output);
+ buffer_write(high_direction);
LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output, high_direction);
}
-static int ft2232_execute_end_state(jtag_command_t *cmd)
-{
- int retval;
- retval = ERROR_OK;
-
- DEBUG_JTAG_IO("end_state: %i", cmd->cmd.end_state->end_state);
-
- if (cmd->cmd.end_state->end_state != TAP_INVALID)
- ft2232_end_state(cmd->cmd.end_state->end_state);
-
- return retval;
-}
-
-
static int ft2232_execute_runtest(jtag_command_t *cmd)
{
int retval;
int predicted_size = 0;
retval = ERROR_OK;
- DEBUG_JTAG_IO("runtest %i cycles, end in %i",
+ DEBUG_JTAG_IO("runtest %i cycles, end in %s",
cmd->cmd.runtest->num_cycles,
- cmd->cmd.runtest->end_state);
+ tap_state_name(cmd->cmd.runtest->end_state));
+
/* only send the maximum buffer size that FT2232C can handle */
predicted_size = 0;
if (tap_get_state() != TAP_IDLE)
predicted_size += 3;
predicted_size += 3 * CEIL(cmd->cmd.runtest->num_cycles, 7);
- if ( (cmd->cmd.runtest->end_state != TAP_INVALID) && (cmd->cmd.runtest->end_state != TAP_IDLE) )
+ if (cmd->cmd.runtest->end_state != TAP_IDLE)
predicted_size += 3;
- if ( (cmd->cmd.runtest->end_state == TAP_INVALID) && (tap_get_end_state() != TAP_IDLE) )
+ if (tap_get_end_state() != TAP_IDLE)
predicted_size += 3;
if (ft2232_buffer_size + predicted_size + 1 > FT2232_BUFFER_SIZE)
{
}
if (tap_get_state() != TAP_IDLE)
{
- /* command "Clock Data to TMS/CS Pin (no Read)" */
- BUFFER_ADD = 0x4b;
- BUFFER_ADD = 0x6; /* scan 7 bits */
-
- /* TMS data bits */
- BUFFER_ADD = tap_get_tms_path(tap_get_state(), TAP_IDLE);
- tap_set_state(TAP_IDLE);
+ move_to_state(TAP_IDLE);
require_send = 1;
}
i = cmd->cmd.runtest->num_cycles;
while (i > 0)
{
+ /* there are no state transitions in this code, so omit state tracking */
+
/* command "Clock Data to TMS/CS Pin (no Read)" */
- BUFFER_ADD = 0x4b;
+ buffer_write(0x4b);
/* scan 7 bits */
- BUFFER_ADD = (i > 7) ? 6 : (i - 1);
+ buffer_write((i > 7) ? 6 : (i - 1));
/* TMS data bits */
- BUFFER_ADD = 0x0;
+ buffer_write(0x0);
tap_set_state(TAP_IDLE);
+
i -= (i > 7) ? 7 : i;
/* LOG_DEBUG("added TMS scan (no read)"); */
}
- if (cmd->cmd.runtest->end_state != TAP_INVALID)
- ft2232_end_state(cmd->cmd.runtest->end_state);
+ ft2232_end_state(cmd->cmd.runtest->end_state);
- if ( tap_get_state() != tap_get_end_state() )
+ if (tap_get_state() != tap_get_end_state())
{
- /* command "Clock Data to TMS/CS Pin (no Read)" */
- BUFFER_ADD = 0x4b;
- /* scan 7 bit */
- BUFFER_ADD = 0x6;
- /* TMS data bits */
- BUFFER_ADD = tap_get_tms_path( tap_get_state(), tap_get_end_state() );
- tap_set_state( tap_get_end_state() );
- /* LOG_DEBUG("added TMS scan (no read)"); */
+ move_to_state(tap_get_end_state());
}
+
require_send = 1;
#ifdef _DEBUG_JTAG_IO_
- LOG_DEBUG( "runtest: %i, end in %s", cmd->cmd.runtest->num_cycles, tap_state_name( tap_get_end_state() ) );
+ LOG_DEBUG("runtest: %i, end in %s", cmd->cmd.runtest->num_cycles, tap_state_name(tap_get_end_state()));
#endif
return retval;
}
+
static int ft2232_execute_statemove(jtag_command_t *cmd)
{
- int retval;
- int predicted_size = 0;
- retval = ERROR_OK;
+ int predicted_size = 0;
+ int retval = ERROR_OK;
DEBUG_JTAG_IO("statemove end in %i", cmd->cmd.statemove->end_state);
require_send = 0;
first_unsent = cmd;
}
- if (cmd->cmd.statemove->end_state != TAP_INVALID)
- ft2232_end_state(cmd->cmd.statemove->end_state);
+ ft2232_end_state(cmd->cmd.statemove->end_state);
- /* command "Clock Data to TMS/CS Pin (no Read)" */
- BUFFER_ADD = 0x4b;
-
- BUFFER_ADD = 0x6; /* scan 7 bits */
+ /* move to end state */
+ if (tap_get_state() != tap_get_end_state())
+ {
+ move_to_state(tap_get_end_state());
+ require_send = 1;
+ }
- /* TMS data bits */
- BUFFER_ADD = tap_get_tms_path( tap_get_state(), tap_get_end_state() );
- /* LOG_DEBUG("added TMS scan (no read)"); */
- tap_set_state( tap_get_end_state() );
- require_send = 1;
-#ifdef _DEBUG_JTAG_IO_
- LOG_DEBUG( "statemove: %s", tap_state_name( tap_get_end_state() ) );
-#endif
-
return retval;
}
static int ft2232_execute_pathmove(jtag_command_t *cmd)
{
- int retval;
- int predicted_size = 0;
- retval = ERROR_OK;
+ int predicted_size = 0;
+ int retval = ERROR_OK;
+
+ tap_state_t* path = cmd->cmd.pathmove->path;
+ int num_states = cmd->cmd.pathmove->num_states;
+
+ DEBUG_JTAG_IO("pathmove: %i states, current: %s end: %s", num_states,
+ tap_state_name(tap_get_state()),
+ tap_state_name(path[num_states-1])
+ );
- DEBUG_JTAG_IO("pathmove: %i states, end in %i",
- cmd->cmd.pathmove->num_states,
- cmd->cmd.pathmove->path[cmd->cmd.pathmove->num_states - 1]);
/* only send the maximum buffer size that FT2232C can handle */
- predicted_size = 3 * CEIL(cmd->cmd.pathmove->num_states, 7);
+ predicted_size = 3 * CEIL(num_states, 7);
if (ft2232_buffer_size + predicted_size + 1 > FT2232_BUFFER_SIZE)
{
if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK)
- retval = ERROR_JTAG_QUEUE_FAILED;
+ retval = ERROR_JTAG_QUEUE_FAILED;
+
require_send = 0;
first_unsent = cmd;
}
- ft2232_add_pathmove(cmd->cmd.pathmove);
+
+ ft2232_add_pathmove(path, num_states);
require_send = 1;
-#ifdef _DEBUG_JTAG_IO_
- LOG_DEBUG( "pathmove: %i states, end in %s", cmd->cmd.pathmove->num_states,
- tap_state_name(cmd->cmd.pathmove->path[cmd->cmd.pathmove->num_states - 1]) );
-#endif
+
return retval;
}
+
static int ft2232_execute_scan(jtag_command_t *cmd)
{
- int retval;
- u8* buffer;
+ uint8_t* buffer;
int scan_size; /* size of IR or DR scan */
- enum scan_type type;
int predicted_size = 0;
- retval = ERROR_OK;
+ int retval = ERROR_OK;
+
+ enum scan_type type = jtag_scan_type(cmd->cmd.scan);
+
+ DEBUG_JTAG_IO("%s type:%d", cmd->cmd.scan->ir_scan ? "IRSCAN" : "DRSCAN", type);
scan_size = jtag_build_buffer(cmd->cmd.scan, &buffer);
- type = jtag_scan_type(cmd->cmd.scan);
+
predicted_size = ft2232_predict_scan_out(scan_size, type);
- if ( (predicted_size + 1) > FT2232_BUFFER_SIZE )
+ if ((predicted_size + 1) > FT2232_BUFFER_SIZE)
{
LOG_DEBUG("oversized ft2232 scan (predicted_size > FT2232_BUFFER_SIZE)");
/* unsent commands before this */
retval = ERROR_JTAG_QUEUE_FAILED;
/* current command */
- if (cmd->cmd.scan->end_state != TAP_INVALID)
- ft2232_end_state(cmd->cmd.scan->end_state);
+ ft2232_end_state(cmd->cmd.scan->end_state);
ft2232_large_scan(cmd->cmd.scan, type, buffer, scan_size);
require_send = 0;
first_unsent = cmd->next;
}
ft2232_expect_read += ft2232_predict_scan_in(scan_size, type);
/* LOG_DEBUG("new read size: %i", ft2232_expect_read); */
- if (cmd->cmd.scan->end_state != TAP_INVALID)
- ft2232_end_state(cmd->cmd.scan->end_state);
+ ft2232_end_state(cmd->cmd.scan->end_state);
ft2232_add_scan(cmd->cmd.scan->ir_scan, type, buffer, scan_size);
require_send = 1;
if (buffer)
free(buffer);
#ifdef _DEBUG_JTAG_IO_
- LOG_DEBUG( "%s scan, %i bits, end in %s", (cmd->cmd.scan->ir_scan) ? "IR" : "DR", scan_size,
- tap_state_name( tap_get_end_state() ) );
+ LOG_DEBUG("%s scan, %i bits, end in %s", (cmd->cmd.scan->ir_scan) ? "IR" : "DR", scan_size,
+ tap_state_name(tap_get_end_state()));
#endif
return retval;
first_unsent = cmd;
}
- if ( (cmd->cmd.reset->trst == 1) || ( cmd->cmd.reset->srst && (jtag_reset_config & RESET_SRST_PULLS_TRST) ) )
- {
- tap_set_state(TAP_RESET);
- }
layout->reset(cmd->cmd.reset->trst, cmd->cmd.reset->srst);
require_send = 1;
first_unsent = cmd->next;
jtag_sleep(cmd->cmd.sleep->us);
#ifdef _DEBUG_JTAG_IO_
- LOG_DEBUG( "sleep %i usec while in %s", cmd->cmd.sleep->us, tap_state_name( tap_get_state() ) );
+ LOG_DEBUG("sleep %i usec while in %s", cmd->cmd.sleep->us, tap_state_name(tap_get_state()));
#endif
return retval;
if (ft2232_stableclocks(cmd->cmd.stableclocks->num_cycles, cmd) != ERROR_OK)
retval = ERROR_JTAG_QUEUE_FAILED;
#ifdef _DEBUG_JTAG_IO_
- LOG_DEBUG( "clocks %i while in %s", cmd->cmd.stableclocks->num_cycles, tap_state_name( tap_get_state() ) );
+ LOG_DEBUG("clocks %i while in %s", cmd->cmd.stableclocks->num_cycles, tap_state_name(tap_get_state()));
#endif
return retval;
switch (cmd->type)
{
- case JTAG_END_STATE: retval = ft2232_execute_end_state(cmd); break;
- case JTAG_RESET: retval = ft2232_execute_reset(cmd); break;
- case JTAG_RUNTEST: retval = ft2232_execute_runtest(cmd); break;
- case JTAG_STATEMOVE: retval = ft2232_execute_statemove(cmd); break;
- case JTAG_PATHMOVE: retval = ft2232_execute_pathmove(cmd); break;
- case JTAG_SCAN: retval = ft2232_execute_scan(cmd); break;
- case JTAG_SLEEP: retval = ft2232_execute_sleep(cmd); break;
- case JTAG_STABLECLOCKS: retval = ft2232_execute_stableclocks(cmd); break;
- default:
- LOG_ERROR("BUG: unknown JTAG command type encountered");
- exit(-1);
+ case JTAG_RESET: retval = ft2232_execute_reset(cmd); break;
+ case JTAG_RUNTEST: retval = ft2232_execute_runtest(cmd); break;
+ case JTAG_STATEMOVE: retval = ft2232_execute_statemove(cmd); break;
+ case JTAG_PATHMOVE: retval = ft2232_execute_pathmove(cmd); break;
+ case JTAG_SCAN: retval = ft2232_execute_scan(cmd); break;
+ case JTAG_SLEEP: retval = ft2232_execute_sleep(cmd); break;
+ case JTAG_STABLECLOCKS: retval = ft2232_execute_stableclocks(cmd); break;
+ default:
+ LOG_ERROR("BUG: unknown JTAG command type encountered");
+ exit(-1);
}
return retval;
}
#if BUILD_FT2232_FTD2XX == 1
-static int ft2232_init_ftd2xx(u16 vid, u16 pid, int more, int* try_more)
+static int ft2232_init_ftd2xx(uint16_t vid, uint16_t pid, int more, int* try_more)
{
- FT_STATUS status;
- DWORD openex_flags = 0;
- char* openex_string = NULL;
- u8 latency_timer;
+ FT_STATUS status;
+ DWORD deviceID;
+ char SerialNumber[16];
+ char Description[64];
+ DWORD openex_flags = 0;
+ char* openex_string = NULL;
+ uint8_t latency_timer;
LOG_DEBUG("'ft2232' interface using FTD2XX with '%s' layout (%4.4x:%4.4x)", ft2232_layout, vid, pid);
#if IS_WIN32 == 0
/* Add non-standard Vid/Pid to the linux driver */
- if ( ( status = FT_SetVIDPID(vid, pid) ) != FT_OK )
+ if ((status = FT_SetVIDPID(vid, pid)) != FT_OK)
{
LOG_WARNING("couldn't add %4.4x:%4.4x", vid, pid);
}
}
status = FT_OpenEx(openex_string, openex_flags, &ftdih);
- if( status != FT_OK ){
+ if (status != FT_OK) {
// under Win32, the FTD2XX driver appends an "A" to the end
// of the description, if we tried by the desc, then
// try by the alternate "A" description.
- if( openex_string == ft2232_device_desc ){
+ if (openex_string == ft2232_device_desc) {
// Try the alternate method.
openex_string = ft2232_device_desc_A;
status = FT_OpenEx(openex_string, openex_flags, &ftdih);
- if( status == FT_OK ){
+ if (status == FT_OK) {
// yea, the "alternate" method worked!
} else {
// drat, give the user a meaningfull message.
// telling the use we tried *BOTH* methods.
LOG_WARNING("Unable to open FTDI Device tried: '%s' and '%s'\n",
ft2232_device_desc,
- ft2232_device_desc_A );
+ ft2232_device_desc_A);
}
}
}
- if ( status != FT_OK )
+ if (status != FT_OK)
{
DWORD num_devices;
status = FT_ListDevices(&num_devices, NULL, FT_LIST_NUMBER_ONLY);
if (status == FT_OK)
{
- char** desc_array = malloc( sizeof(char*) * (num_devices + 1) );
- u32 i;
+ char** desc_array = malloc(sizeof(char*) * (num_devices + 1));
+ uint32_t i;
for (i = 0; i < num_devices; i++)
desc_array[i] = malloc(64);
return ERROR_JTAG_INIT_FAILED;
}
- if ( ( status = FT_SetLatencyTimer(ftdih, ft2232_latency) ) != FT_OK )
+ if ((status = FT_SetLatencyTimer(ftdih, ft2232_latency)) != FT_OK)
{
LOG_ERROR("unable to set latency timer: %lu", status);
return ERROR_JTAG_INIT_FAILED;
}
- if ( ( status = FT_GetLatencyTimer(ftdih, &latency_timer) ) != FT_OK )
+ if ((status = FT_GetLatencyTimer(ftdih, &latency_timer)) != FT_OK)
{
LOG_ERROR("unable to get latency timer: %lu", status);
return ERROR_JTAG_INIT_FAILED;
LOG_DEBUG("current latency timer: %i", latency_timer);
}
- if ( ( status = FT_SetTimeouts(ftdih, 5000, 5000) ) != FT_OK )
+ if ((status = FT_SetTimeouts(ftdih, 5000, 5000)) != FT_OK)
{
LOG_ERROR("unable to set timeouts: %lu", status);
return ERROR_JTAG_INIT_FAILED;
}
- if ( ( status = FT_SetBitMode(ftdih, 0x0b, 2) ) != FT_OK )
+ if ((status = FT_SetBitMode(ftdih, 0x0b, 2)) != FT_OK)
{
LOG_ERROR("unable to enable bit i/o mode: %lu", status);
return ERROR_JTAG_INIT_FAILED;
}
+ if ((status = FT_GetDeviceInfo(ftdih, &ftdi_device, &deviceID, SerialNumber, Description, NULL)) != FT_OK)
+ {
+ LOG_ERROR("unable to get FT_GetDeviceInfo: %lu", status);
+ return ERROR_JTAG_INIT_FAILED;
+ }
+ else
+ {
+ LOG_INFO("device: %lu", ftdi_device);
+ LOG_INFO("deviceID: %lu", deviceID);
+ LOG_INFO("SerialNumber: %s", SerialNumber);
+ LOG_INFO("Description: %s", Description);
+
+#ifdef BUILD_FTD2XX_HIGHSPEED
+ if (ft2232_device_is_highspeed())
+ {
+ ft2232_max_tck = FTDI_2232H_4232H_MAX_TCK;
+ LOG_INFO("max TCK change to: %u kHz", ft2232_max_tck);
+ }
+#endif
+ }
+
return ERROR_OK;
}
{
FT_STATUS status;
- if ( ( status = FT_Purge(ftdih, FT_PURGE_RX | FT_PURGE_TX) ) != FT_OK )
+ if ((status = FT_Purge(ftdih, FT_PURGE_RX | FT_PURGE_TX)) != FT_OK)
{
LOG_ERROR("error purging ftd2xx device: %lu", status);
return ERROR_JTAG_INIT_FAILED;
#endif /* BUILD_FT2232_FTD2XX == 1 */
#if BUILD_FT2232_LIBFTDI == 1
-static int ft2232_init_libftdi(u16 vid, u16 pid, int more, int* try_more)
+static int ft2232_init_libftdi(uint16_t vid, uint16_t pid, int more, int* try_more)
{
- u8 latency_timer;
+ uint8_t latency_timer;
LOG_DEBUG("'ft2232' interface using libftdi with '%s' layout (%4.4x:%4.4x)",
ft2232_layout, vid, pid);
if (ftdi_init(&ftdic) < 0)
return ERROR_JTAG_INIT_FAILED;
+ if (ftdi_set_interface(&ftdic, INTERFACE_A) < 0)
+ {
+ LOG_ERROR("unable to select FT2232 channel A: %s", ftdic.error_str);
+ return ERROR_JTAG_INIT_FAILED;
+ }
+
/* context, vendor id, product id */
if (ftdi_usb_open_desc(&ftdic, vid, pid, ft2232_device_desc,
ft2232_serial) < 0)
return ERROR_JTAG_INIT_FAILED;
}
- if (ftdi_set_interface(&ftdic, INTERFACE_A) < 0)
- {
- LOG_ERROR("unable to select FT2232 channel A: %s", ftdic.error_str);
- return ERROR_JTAG_INIT_FAILED;
- }
-
+ /* There is already a reset in ftdi_usb_open_desc, this should be redundant */
if (ftdi_usb_reset(&ftdic) < 0)
{
LOG_ERROR("unable to reset ftdi device");
static int ft2232_init(void)
{
- u8 buf[1];
+ uint8_t buf[1];
int retval;
- u32 bytes_written;
- ft2232_layout_t* cur_layout = ft2232_layouts;
+ uint32_t bytes_written;
+ const ft2232_layout_t* cur_layout = ft2232_layouts;
int i;
- if ( (ft2232_layout == NULL) || (ft2232_layout[0] == 0) )
+ if (tap_get_tms_path_len(TAP_IRPAUSE,TAP_IRPAUSE) == 7)
+ {
+ LOG_DEBUG("ft2232 interface using 7 step jtag state transitions");
+ }
+ else
+ {
+ LOG_DEBUG("ft2232 interface using shortest path jtag state transitions");
+
+ }
+ if ((ft2232_layout == NULL) || (ft2232_layout[0] == 0))
{
ft2232_layout = "usbjtag";
LOG_WARNING("No ft2232 layout specified, using default 'usbjtag'");
if (layout->init() != ERROR_OK)
return ERROR_JTAG_INIT_FAILED;
- ft2232_speed(jtag_speed);
+ ft2232_speed(jtag_get_speed());
buf[0] = 0x85; /* Disconnect TDI/DO to TDO/DI for Loopback */
- if ( ( ( retval = ft2232_write(buf, 1, &bytes_written) ) != ERROR_OK ) || (bytes_written != 1) )
+ if (((retval = ft2232_write(buf, 1, &bytes_written)) != ERROR_OK) || (bytes_written != 1))
{
LOG_ERROR("couldn't write to FT2232 to disable loopback");
return ERROR_JTAG_INIT_FAILED;
static int usbjtag_init(void)
{
- u8 buf[3];
- u32 bytes_written;
+ uint8_t buf[3];
+ uint32_t bytes_written;
low_output = 0x08;
low_direction = 0x0b;
return ERROR_JTAG_INIT_FAILED;
}
+ enum reset_types jtag_reset_config = jtag_get_reset_config();
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
{
low_direction &= ~nTRSTnOE; /* nTRST input */
/* initialize low byte for jtag */
buf[0] = 0x80; /* command "set data bits low byte" */
- buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, xRST high) */
- buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in */
+ buf[1] = low_output; /* value (TMS = 1,TCK = 0, TDI = 0, xRST high) */
+ buf[2] = low_direction; /* dir (output = 1), TCK/TDI/TMS = out, TDO = in */
LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
- if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) )
+ if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
{
LOG_ERROR("couldn't initialize FT2232 with 'USBJTAG' layout");
return ERROR_JTAG_INIT_FAILED;
static int axm0432_jtag_init(void)
{
- u8 buf[3];
- u32 bytes_written;
+ uint8_t buf[3];
+ uint32_t bytes_written;
low_output = 0x08;
low_direction = 0x2b;
/* initialize low byte for jtag */
buf[0] = 0x80; /* command "set data bits low byte" */
- buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */
- buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */
+ buf[1] = low_output; /* value (TMS = 1,TCK = 0, TDI = 0, nOE = 0) */
+ buf[2] = low_direction; /* dir (output = 1), TCK/TDI/TMS = out, TDO = in, nOE = out */
LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
- if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) )
+ if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
{
LOG_ERROR("couldn't initialize FT2232 with 'JTAGkey' layout");
return ERROR_JTAG_INIT_FAILED;
high_output = 0x0;
high_direction = 0x0c;
+ enum reset_types jtag_reset_config = jtag_get_reset_config();
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
{
LOG_ERROR("can't set nTRSTOE to push-pull on the Dicarlo jtag");
buf[2] = high_direction; /* all outputs (xRST and xRSTnOE) */
LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
- if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) )
+ if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
{
LOG_ERROR("couldn't initialize FT2232 with 'Dicarlo' layout");
return ERROR_JTAG_INIT_FAILED;
static int jtagkey_init(void)
{
- u8 buf[3];
- u32 bytes_written;
+ uint8_t buf[3];
+ uint32_t bytes_written;
low_output = 0x08;
low_direction = 0x1b;
/* initialize low byte for jtag */
buf[0] = 0x80; /* command "set data bits low byte" */
- buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */
- buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */
+ buf[1] = low_output; /* value (TMS = 1,TCK = 0, TDI = 0, nOE = 0) */
+ buf[2] = low_direction; /* dir (output = 1), TCK/TDI/TMS = out, TDO = in, nOE = out */
LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
- if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) )
+ if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
{
LOG_ERROR("couldn't initialize FT2232 with 'JTAGkey' layout");
return ERROR_JTAG_INIT_FAILED;
nSRST = 0x02;
nSRSTnOE = 0x08;
}
- else if ( (strcmp(layout->name, "jtagkey_prototype_v1") == 0)
- || (strcmp(layout->name, "oocdlink") == 0) )
+ else if ((strcmp(layout->name, "jtagkey_prototype_v1") == 0)
+ || (strcmp(layout->name, "oocdlink") == 0))
{
nTRST = 0x02;
nTRSTnOE = 0x1;
high_output = 0x0;
high_direction = 0x0f;
+ enum reset_types jtag_reset_config = jtag_get_reset_config();
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
{
high_output |= nTRSTnOE;
buf[2] = high_direction; /* all outputs (xRST and xRSTnOE) */
LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
- if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) )
+ if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
{
LOG_ERROR("couldn't initialize FT2232 with 'JTAGkey' layout");
return ERROR_JTAG_INIT_FAILED;
static int olimex_jtag_init(void)
{
- u8 buf[3];
- u32 bytes_written;
+ uint8_t buf[3];
+ uint32_t bytes_written;
low_output = 0x08;
low_direction = 0x1b;
/* initialize low byte for jtag */
buf[0] = 0x80; /* command "set data bits low byte" */
- buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */
- buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */
+ buf[1] = low_output; /* value (TMS = 1,TCK = 0, TDI = 0, nOE = 0) */
+ buf[2] = low_direction; /* dir (output = 1), TCK/TDI/TMS = out, TDO = in, nOE = out */
LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
- if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) )
+ if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
{
- LOG_ERROR("couldn't initialize FT2232 with 'JTAGkey' layout");
+ LOG_ERROR("couldn't initialize FT2232 with 'Olimex' layout");
return ERROR_JTAG_INIT_FAILED;
}
high_output = 0x0;
high_direction = 0x0f;
+ enum reset_types jtag_reset_config = jtag_get_reset_config();
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
{
high_output |= nTRSTnOE;
buf[2] = high_direction; /* all outputs (xRST and xRSTnOE) */
LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
- if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) )
+ if ((ft2232_write(buf, 3, &bytes_written) != ERROR_OK) || (bytes_written != 3))
{
- LOG_ERROR("couldn't initialize FT2232 with 'JTAGkey' layout");
+ LOG_ERROR("couldn't initialize FT2232 with 'Olimex' layout");
return ERROR_JTAG_INIT_FAILED;
}
static int flyswatter_init(void)
{
- u8 buf[3];
- u32 bytes_written;
+ uint8_t buf[3];
+ uint32_t bytes_written;
low_output = 0x18;
low_direction = 0xfb;
/* initialize low byte for jtag */
buf[0] = 0x80; /* command "set data bits low byte" */
- buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */
- buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE[12]=out, n[ST]srst=out */
+ buf[1] = low_output; /* value (TMS = 1,TCK = 0, TDI = 0, nOE = 0) */
+ buf[2] = low_direction; /* dir (output = 1), TCK/TDI/TMS = out, TDO = in, nOE[12]=out, n[ST]srst = out */
LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
- if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) )
+ if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
{
LOG_ERROR("couldn't initialize FT2232 with 'flyswatter' layout");
return ERROR_JTAG_INIT_FAILED;
buf[2] = high_direction; /* all outputs (xRST and xRSTnOE) */
LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
- if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) )
+ if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
{
LOG_ERROR("couldn't initialize FT2232 with 'flyswatter' layout");
return ERROR_JTAG_INIT_FAILED;
static int turtle_init(void)
{
- u8 buf[3];
- u32 bytes_written;
+ uint8_t buf[3];
+ uint32_t bytes_written;
low_output = 0x08;
low_direction = 0x5b;
/* initialize low byte for jtag */
buf[0] = 0x80; /* command "set data bits low byte" */
- buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */
- buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */
+ buf[1] = low_output; /* value (TMS = 1,TCK = 0, TDI = 0, nOE = 0) */
+ buf[2] = low_direction; /* dir (output = 1), TCK/TDI/TMS = out, TDO = in, nOE = out */
LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
- if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) )
+ if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
{
LOG_ERROR("couldn't initialize FT2232 with 'turtelizer2' layout");
return ERROR_JTAG_INIT_FAILED;
buf[2] = high_direction;
LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
- if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) )
+ if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
{
LOG_ERROR("couldn't initialize FT2232 with 'turtelizer2' layout");
return ERROR_JTAG_INIT_FAILED;
static int comstick_init(void)
{
- u8 buf[3];
- u32 bytes_written;
+ uint8_t buf[3];
+ uint32_t bytes_written;
low_output = 0x08;
low_direction = 0x0b;
/* initialize low byte for jtag */
buf[0] = 0x80; /* command "set data bits low byte" */
- buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */
- buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */
+ buf[1] = low_output; /* value (TMS = 1,TCK = 0, TDI = 0, nOE = 0) */
+ buf[2] = low_direction; /* dir (output = 1), TCK/TDI/TMS = out, TDO = in, nOE = out */
LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
- if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) )
+ if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
{
LOG_ERROR("couldn't initialize FT2232 with 'comstick' layout");
return ERROR_JTAG_INIT_FAILED;
buf[2] = high_direction;
LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
- if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) )
+ if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
{
LOG_ERROR("couldn't initialize FT2232 with 'comstick' layout");
return ERROR_JTAG_INIT_FAILED;
static int stm32stick_init(void)
{
- u8 buf[3];
- u32 bytes_written;
+ uint8_t buf[3];
+ uint32_t bytes_written;
low_output = 0x88;
low_direction = 0x8b;
/* initialize low byte for jtag */
buf[0] = 0x80; /* command "set data bits low byte" */
- buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */
- buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */
+ buf[1] = low_output; /* value (TMS = 1,TCK = 0, TDI = 0, nOE = 0) */
+ buf[2] = low_direction; /* dir (output = 1), TCK/TDI/TMS = out, TDO = in, nOE = out */
LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
- if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) )
+ if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
{
LOG_ERROR("couldn't initialize FT2232 with 'stm32stick' layout");
return ERROR_JTAG_INIT_FAILED;
buf[2] = high_direction;
LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
- if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) )
+ if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
{
LOG_ERROR("couldn't initialize FT2232 with 'stm32stick' layout");
return ERROR_JTAG_INIT_FAILED;
static int sheevaplug_init(void)
{
- u8 buf[3];
- u32 bytes_written;
+ uint8_t buf[3];
+ uint32_t bytes_written;
low_output = 0x08;
low_direction = 0x1b;
/* initialize low byte for jtag */
buf[0] = 0x80; /* command "set data bits low byte" */
- buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */
- buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in */
+ buf[1] = low_output; /* value (TMS = 1,TCK = 0, TDI = 0, nOE = 0) */
+ buf[2] = low_direction; /* dir (output = 1), TCK/TDI/TMS = out, TDO = in */
LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
{
- LOG_ERROR("couldn't initialize FT2232 with 'sheevaplug' layout");
+ LOG_ERROR("couldn't initialize FT2232 with 'sheevaplug' layout");
return ERROR_JTAG_INIT_FAILED;
}
if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
{
- LOG_ERROR("couldn't initialize FT2232 with 'sheevaplug' layout");
+ LOG_ERROR("couldn't initialize FT2232 with 'sheevaplug' layout");
+ return ERROR_JTAG_INIT_FAILED;
+ }
+
+ return ERROR_OK;
+}
+
+static int cortino_jtag_init(void)
+{
+ uint8_t buf[3];
+ uint32_t bytes_written;
+
+ low_output = 0x08;
+ low_direction = 0x1b;
+
+ /* initialize low byte for jtag */
+ buf[0] = 0x80; /* command "set data bits low byte" */
+ buf[1] = low_output; /* value (TMS = 1,TCK = 0, TDI = 0, nOE = 0) */
+ buf[2] = low_direction; /* dir (output = 1), TCK/TDI/TMS = out, TDO = in, nOE = out */
+ LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
+
+ if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
+ {
+ LOG_ERROR("couldn't initialize FT2232 with 'cortino' layout");
+ return ERROR_JTAG_INIT_FAILED;
+ }
+
+ nTRST = 0x01;
+ nTRSTnOE = 0x00; /* no output enable for nTRST */
+ nSRST = 0x02;
+ nSRSTnOE = 0x00; /* no output enable for nSRST */
+
+ high_output = 0x03;
+ high_direction = 0x03;
+
+ /* initialize high port */
+ buf[0] = 0x82; /* command "set data bits high byte" */
+ buf[1] = high_output;
+ buf[2] = high_direction;
+ LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
+
+ if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
+ {
+ LOG_ERROR("couldn't initialize FT2232 with 'stm32stick' layout");
return ERROR_JTAG_INIT_FAILED;
}
high_output |= 0x08;
}
- BUFFER_ADD = 0x82;
- BUFFER_ADD = high_output;
- BUFFER_ADD = high_direction;
+ buffer_write(0x82);
+ buffer_write(high_output);
+ buffer_write(high_direction);
}
*/
high_output ^= 0x0c;
- BUFFER_ADD = 0x82;
- BUFFER_ADD = high_output;
- BUFFER_ADD = high_direction;
+ buffer_write(0x82);
+ buffer_write(high_output);
+ buffer_write(high_direction);
}
high_output = 0x08;
}
- BUFFER_ADD = 0x82;
- BUFFER_ADD = high_output;
- BUFFER_ADD = high_direction;
+ buffer_write(0x82);
+ buffer_write(high_output);
+ buffer_write(high_direction);
}
status = FT_Close(ftdih);
#elif BUILD_FT2232_LIBFTDI == 1
- ftdi_disable_bitbang(&ftdic);
-
ftdi_usb_close(&ftdic);
ftdi_deinit(&ftdic);
if (argc == 1)
{
ft2232_device_desc = strdup(args[0]);
- cp = strchr( ft2232_device_desc, 0 );
+ cp = strchr(ft2232_device_desc, 0);
// under Win32, the FTD2XX driver appends an "A" to the end
// of the description, this examines the given desc
// and creates the 'missing' _A or non_A variable.
- if( (cp[-1] == 'A') && (cp[-2]==' ') ){
+ if ((cp[-1] == 'A') && (cp[-2]==' ')) {
// it was, so make this the "A" version.
ft2232_device_desc_A = ft2232_device_desc;
// and *CREATE* the non-A version.
- strcpy( buf, ft2232_device_desc );
- cp = strchr( buf, 0 );
+ strcpy(buf, ft2232_device_desc);
+ cp = strchr(buf, 0);
cp[-2] = 0;
- ft2232_device_desc = strdup( buf );
+ ft2232_device_desc = strdup(buf);
} else {
- // <space>A not defined
+ // <space > A not defined
// so create it
- sprintf( buf, "%s A", ft2232_device_desc );
- ft2232_device_desc_A = strdup( buf );
+ sprintf(buf, "%s A", ft2232_device_desc);
+ ft2232_device_desc_A = strdup(buf);
}
}
else
static int ft2232_handle_vid_pid_command(struct command_context_s* cmd_ctx, char* cmd, char** args, int argc)
{
- int i;
-
if (argc > MAX_USB_IDS * 2)
{
LOG_WARNING("ignoring extra IDs in ft2232_vid_pid "
"(maximum is %d pairs)", MAX_USB_IDS);
argc = MAX_USB_IDS * 2;
}
- if ( argc < 2 || (argc & 1) )
+ if (argc < 2 || (argc & 1))
{
LOG_WARNING("incomplete ft2232_vid_pid configuration directive");
if (argc < 2)
- return ERROR_OK;
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ // remove the incomplete trailing id
+ argc -= 1;
}
- for (i = 0; i + 1 < argc; i += 2)
+ int i;
+ int retval = ERROR_OK;
+ for (i = 0; i < argc; i += 2)
{
- ft2232_vid[i >> 1] = strtol(args[i], NULL, 0);
- ft2232_pid[i >> 1] = strtol(args[i + 1], NULL, 0);
+ retval = parse_u16(args[i], &ft2232_vid[i >> 1]);
+ if (ERROR_OK != retval)
+ break;
+ retval = parse_u16(args[i + 1], &ft2232_pid[i >> 1]);
+ if (ERROR_OK != retval)
+ break;
}
/*
*/
ft2232_vid[i >> 1] = ft2232_pid[i >> 1] = 0;
- return ERROR_OK;
+ return retval;
}
int retval = 0;
/* 7 bits of either ones or zeros. */
- u8 tms = (tap_get_state() == TAP_RESET ? 0x7F : 0x00);
+ uint8_t tms = (tap_get_state() == TAP_RESET ? 0x7F : 0x00);
while (num_cycles > 0)
{
first_unsent = cmd;
}
+ /* there are no state transitions in this code, so omit state tracking */
+
/* command "Clock Data to TMS/CS Pin (no Read)" */
- BUFFER_ADD = 0x4b;
+ buffer_write(0x4b);
/* scan 7 bit */
- BUFFER_ADD = bitcount_per_command - 1;
+ buffer_write(bitcount_per_command - 1);
/* TMS data bits are either all zeros or ones to stay in the current stable state */
- BUFFER_ADD = tms;
+ buffer_write(tms);
require_send = 1;
return retval;
}
+
/* ---------------------------------------------------------------------
* Support for IceBear JTAG adapter from Section5:
- * http://section5.ch/icebear
+ * http://section5.ch/icebear
*
* Author: Sten, debian@sansys-electronic.com
*/
* ADBUS7 - GND
*/
static int icebear_jtag_init(void) {
- u8 buf[3];
- u32 bytes_written;
+ uint8_t buf[3];
+ uint32_t bytes_written;
low_direction = 0x0b; /* output: TCK TDI TMS; input: TDO */
low_output = 0x08; /* high: TMS; low: TCK TDI */
nTRST = 0x10;
nSRST = 0x20;
+ enum reset_types jtag_reset_config = jtag_get_reset_config();
if ((jtag_reset_config & RESET_TRST_OPEN_DRAIN) != 0) {
low_direction &= ~nTRST; /* nTRST high impedance */
}
buf[2] = low_direction;
LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
- if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) {
+ if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) {
LOG_ERROR("couldn't initialize FT2232 with 'IceBear' layout (low)");
return ERROR_JTAG_INIT_FAILED;
}
buf[2] = high_direction; /* all outputs (xRST and xRSTnOE) */
LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
- if ( ( ( ft2232_write(buf, 3, &bytes_written) ) != ERROR_OK ) || (bytes_written != 3) ) {
+ if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) {
LOG_ERROR("couldn't initialize FT2232 with 'IceBear' layout (high)");
return ERROR_JTAG_INIT_FAILED;
}
low_output &= ~nTRST;
}
else if (trst == 0) {
+ enum reset_types jtag_reset_config = jtag_get_reset_config();
if ((jtag_reset_config & RESET_TRST_OPEN_DRAIN) != 0)
low_direction &= ~nTRST;
else
}
/* command "set data bits low byte" */
- BUFFER_ADD = 0x80;
- BUFFER_ADD = low_output;
- BUFFER_ADD = low_direction;
+ buffer_write(0x80);
+ buffer_write(low_output);
+ buffer_write(low_direction);
+
LOG_DEBUG("trst: %i, srst: %i, low_output: 0x%2.2x, low_direction: 0x%2.2x", trst, srst, low_output, low_direction);
}