#include "config.h"
#endif
-#define INCLUDE_JTAG_INTERFACE_H
-#include "jtag.h"
+#include "interface.h"
#include "bitbang.h"
#define TDO_BIT 1
#include <sys/mman.h>
-static u8 output_value = 0x0;
+static uint8_t output_value = 0x0;
static int dev_mem_fd;
static void *gpio_controller;
-static volatile u8 *gpio_data_register;
-static volatile u8 *gpio_data_direction_register;
+static volatile uint8_t *gpio_data_register;
+static volatile uint8_t *gpio_data_direction_register;
/* low level command set
*/
static void ep93xx_reset(int trst, int srst);
static int ep93xx_speed(int speed);
-static int ep93xx_register_commands(struct command_context_s *cmd_ctx);
+static int ep93xx_register_commands(struct command_context *cmd_ctx);
static int ep93xx_init(void);
static int ep93xx_quit(void);
struct timespec ep93xx_zzzz;
-jtag_interface_t ep93xx_interface =
+struct jtag_interface ep93xx_interface =
{
.name = "ep93xx",
.execute_queue = bitbang_execute_queue,
- .speed = ep93xx_speed,
+ .speed = ep93xx_speed,
.register_commands = ep93xx_register_commands,
.init = ep93xx_init,
.quit = ep93xx_quit,
};
-static bitbang_interface_t ep93xx_bitbang =
+static struct bitbang_interface ep93xx_bitbang =
{
.read = ep93xx_read,
.write = ep93xx_write,
output_value |= TCK_BIT;
else
output_value &= ~TCK_BIT;
-
+
if (tms)
output_value |= TMS_BIT;
else
output_value &= ~TMS_BIT;
-
+
if (tdi)
output_value |= TDI_BIT;
else
output_value |= SRST_BIT;
else if (srst == 1)
output_value &= ~SRST_BIT;
-
+
*gpio_data_register = output_value;
nanosleep(&ep93xx_zzzz, NULL);
}
return ERROR_OK;
}
-static int ep93xx_register_commands(struct command_context_s *cmd_ctx)
+static int ep93xx_register_commands(struct command_context *cmd_ctx)
{
return ERROR_OK;
static int set_gonk_mode(void)
{
void *syscon;
- u32 devicecfg;
+ uint32_t devicecfg;
syscon = mmap(NULL, 4096, PROT_READ | PROT_WRITE,
MAP_SHARED, dev_mem_fd, 0x80930000);
{
int ret;
- bitbang_interface = &ep93xx_bitbang;
+ bitbang_interface = &ep93xx_bitbang;
ep93xx_zzzz.tv_sec = 0;
ep93xx_zzzz.tv_nsec = 10000000;
gpio_data_direction_register = gpio_controller + 0x18;
LOG_INFO("gpio_data_register = %p\n", gpio_data_register);
- LOG_INFO("gpio_data_direction_reg = %p\n", gpio_data_direction_register);
+ LOG_INFO("gpio_data_direction_reg = %p\n", gpio_data_direction_register);
/*
* Configure bit 0 (TDO) as an input, and bits 1-5 (TDI, TCK
* TMS, TRST, SRST) as outputs. Drive TDI and TCK low, and