+// SPDX-License-Identifier: GPL-2.0-or-later
+
/*
* Driver for USB-JTAG, Altera USB-Blaster and compatibles
*
* Copyright (C) 2009 Catalin Patulea cat@vv.carleton.ca
* Copyright (C) 2006 Kolja Waschk usbjtag@ixo.de
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
*/
/*
#include <jtag/interface.h>
#include <jtag/commands.h>
#include <helper/time_support.h>
+#include <helper/replacements.h>
#include "ublast_access.h"
/* system includes */
char *lowlevel_name;
struct ublast_lowlevel *drv;
- char *ublast_device_desc;
uint16_t ublast_vid, ublast_pid;
uint16_t ublast_vid_uninit, ublast_pid_uninit;
int flags;
};
/*
- * Available lowlevel drivers (FTDI, FTD2xx, ...)
+ * Available lowlevel drivers (FTDI, libusb, ...)
*/
struct drvs_map {
char *name;
/**
* ublast_queue_byte - queue one 'bitbang mode' byte for USB Blaster
- * @abyte: the byte to queue
+ * @param abyte the byte to queue
*
* Queues one byte in 'bitbang mode' to the USB Blaster. The byte is not
* actually sent, but stored in a buffer. The write is performed once
/**
* ublast_compute_pin - compute if gpio should be asserted
- * @steer: control (ie. TRST driven, SRST driven, of fixed)
+ * @param steer control (ie. TRST driven, SRST driven, of fixed)
*
* Returns pin value (1 means driven high, 0 mean driven low)
*/
/**
* ublast_build_out - build bitbang mode output byte
- * @type: says if reading back TDO is required
+ * @param type says if reading back TDO is required
*
* Returns the compute bitbang mode byte
*/
/**
* ublast_reset - reset the JTAG device is possible
- * @trst: 1 if TRST is to be asserted
- * @srst: 1 if SRST is to be asserted
+ * @param trst 1 if TRST is to be asserted
+ * @param srst 1 if SRST is to be asserted
*/
static void ublast_reset(int trst, int srst)
{
/**
* ublast_clock_tms - clock a TMS transition
- * @tms: the TMS to be sent
+ * @param tms the TMS to be sent
*
* Triggers a TMS transition (ie. one JTAG TAP state move).
*/
/**
* ublast_clock_tdi - Output a TDI with bitbang mode
- * @tdi: the TDI bit to be shifted out
- * @type: scan type (ie. does a readback of TDO is required)
+ * @param tdi the TDI bit to be shifted out
+ * @param type scan type (ie. does a readback of TDO is required)
*
* Output a TDI bit and assert clock to push it into the JTAG device :
- * - writing out TCK=0, TMS=<old_state>=0, TDI=<tdi>
- * - writing out TCK=1, TMS=<new_state>, TDI=<tdi> which triggers the JTAG
+ * - writing out TCK=0, TMS=\<old_state>=0, TDI=\<tdi>
+ * - writing out TCK=1, TMS=\<new_state>, TDI=\<tdi> which triggers the JTAG
* device acquiring the data.
*
* If a TDO is to be read back, the required read is requested (bitbang mode),
/**
* ublast_clock_tdi_flip_tms - Output a TDI with bitbang mode, change JTAG state
- * @tdi: the TDI bit to be shifted out
- * @type: scan type (ie. does a readback of TDO is required)
+ * @param tdi the TDI bit to be shifted out
+ * @param type scan type (ie. does a readback of TDO is required)
*
* This function is the same as ublast_clock_tdi(), but it changes also the TMS
* while output the TDI. This should be the last TDI output of a TDI
/**
* ublast_queue_bytes - queue bytes for the USB Blaster
- * @bytes: byte array
- * @nb_bytes: number of bytes
+ * @param bytes byte array
+ * @param nb_bytes number of bytes
*
* Queues bytes to be sent to the USB Blaster. The bytes are not
* actually sent, but stored in a buffer. The write is performed once
/**
* ublast_tms_seq - write a TMS sequence transition to JTAG
- * @bits: TMS bits to be written (bit0, bit1 .. bitN)
- * @nb_bits: number of TMS bits (between 1 and 8)
- * @skip: number of TMS bits to skip at the beginning of the series
+ * @param bits TMS bits to be written (bit0, bit1 .. bitN)
+ * @param nb_bits number of TMS bits (between 1 and 8)
+ * @param skip number of TMS bits to skip at the beginning of the series
*
* Write a series of TMS transitions, where each transition consists in :
- * - writing out TCK=0, TMS=<new_state>, TDI=<???>
- * - writing out TCK=1, TMS=<new_state>, TDI=<???> which triggers the transition
+ * - writing out TCK=0, TMS=\<new_state>, TDI=\<???>
+ * - writing out TCK=1, TMS=\<new_state>, TDI=\<???> which triggers the transition
* The function ensures that at the end of the sequence, the clock (TCK) is put
* low.
*/
/**
* ublast_tms - write a tms command
- * @cmd: tms command
+ * @param cmd tms command
*/
static void ublast_tms(struct tms_command *cmd)
{
/**
* ublast_path_move - write a TMS sequence transition to JTAG
- * @cmd: path transition
+ * @param cmd path transition
*
* Write a series of TMS transitions, where each transition consists in :
- * - writing out TCK=0, TMS=<new_state>, TDI=<???>
- * - writing out TCK=1, TMS=<new_state>, TDI=<???> which triggers the transition
+ * - writing out TCK=0, TMS=\<new_state>, TDI=\<???>
+ * - writing out TCK=1, TMS=\<new_state>, TDI=\<???> which triggers the transition
* The function ensures that at the end of the sequence, the clock (TCK) is put
* low.
*/
/**
* ublast_state_move - move JTAG state to the target state
- * @state: the target state
- * @skip: number of bits to skip at the beginning of the path
+ * @param state the target state
+ * @param skip number of bits to skip at the beginning of the path
*
* Input the correct TMS sequence to the JTAG TAP so that we end up in the
* target state. This assumes the current state (tap_get_state()) is correct.
/**
* ublast_read_byteshifted_tdos - read TDO of byteshift writes
- * @buf: the buffer to store the bits
- * @nb_bits: the number of bits
+ * @param buf the buffer to store the bits
+ * @param nb_bytes the number of bytes
*
* Reads back from USB Blaster TDO bits, triggered by a 'byteshift write', ie. eight
* bits per received byte from USB interface, and store them in buffer.
/**
* ublast_read_bitbang_tdos - read TDO of bitbang writes
- * @buf: the buffer to store the bits
- * @nb_bits: the number of bits
+ * @param buf the buffer to store the bits
+ * @param nb_bits the number of bits
*
* Reads back from USB Blaster TDO bits, triggered by a 'bitbang write', ie. one
* bit per received byte from USB interface, and store them in buffer, where :
* - first bit is stored in byte0, bit0 (LSB)
* - second bit is stored in byte0, bit 1
* ...
- * - eight bit is sotred in byte0, bit 7
- * - ninth bit is sotred in byte1, bit 0
+ * - eight bit is stored in byte0, bit 7
+ * - ninth bit is stored in byte1, bit 0
* - etc ...
*
* Returns ERROR_OK if OK, ERROR_xxx if a read error occurred
/**
* ublast_queue_tdi - short description
- * @bits: bits to be queued on TDI (or NULL if 0 are to be queued)
- * @nb_bits: number of bits
- * @scan: scan type (ie. if TDO read back is required or not)
+ * @param bits bits to be queued on TDI (or NULL if 0 are to be queued)
+ * @param nb_bits number of bits
+ * @param scan scan type (ie. if TDO read back is required or not)
*
* Outputs a series of TDI bits on TDI.
* As a side effect, the last TDI bit is sent along a TMS=1, and triggers a JTAG
/**
* ublast_scan - launches a DR-scan or IR-scan
- * @cmd: the command to launch
+ * @param cmd the command to launch
*
* Launch a JTAG IR-scan or DR-scan
*
ublast_initial_wipeout();
}
- for (cmd = jtag_command_queue; ret == ERROR_OK && cmd != NULL;
+ for (cmd = jtag_command_queue; ret == ERROR_OK && cmd;
cmd = cmd->next) {
switch (cmd->type) {
case JTAG_RESET:
info.drv->ublast_pid = info.ublast_pid;
info.drv->ublast_vid_uninit = info.ublast_vid_uninit;
info.drv->ublast_pid_uninit = info.ublast_pid_uninit;
- info.drv->ublast_device_desc = info.ublast_device_desc;
info.drv->firmware_path = info.firmware_path;
info.flags |= info.drv->flags;
return info.drv->close(info.drv);
}
-COMMAND_HANDLER(ublast_handle_device_desc_command)
-{
- if (CMD_ARGC != 1)
- return ERROR_COMMAND_SYNTAX_ERROR;
-
- info.ublast_device_desc = strdup(CMD_ARGV[0]);
-
- return ERROR_OK;
-}
-
COMMAND_HANDLER(ublast_handle_vid_pid_command)
{
if (CMD_ARGC > 4) {
}
-static const struct command_registration ublast_command_handlers[] = {
- {
- .name = "usb_blaster_device_desc",
- .handler = ublast_handle_device_desc_command,
- .mode = COMMAND_CONFIG,
- .help = "set the USB device description of the USB-Blaster",
- .usage = "description-string",
- },
+static const struct command_registration ublast_subcommand_handlers[] = {
{
- .name = "usb_blaster_vid_pid",
+ .name = "vid_pid",
.handler = ublast_handle_vid_pid_command,
.mode = COMMAND_CONFIG,
.help = "the vendor ID and product ID of the USB-Blaster and "
.usage = "vid pid vid_uninit pid_uninit",
},
{
- .name = "usb_blaster_lowlevel_driver",
+ .name = "lowlevel_driver",
.handler = ublast_handle_lowlevel_drv_command,
.mode = COMMAND_CONFIG,
.help = "set the lowlevel access for the USB Blaster (ftdi, ublast2)",
.usage = "(ftdi|ublast2)",
},
{
- .name = "usb_blaster_pin",
+ .name = "pin",
.handler = ublast_handle_pin_command,
.mode = COMMAND_ANY,
.help = "show or set pin state for the unused GPIO pins",
.usage = "(pin6|pin8) (0|1|s|t)",
},
{
- .name = "usb_blaster_firmware",
+ .name = "firmware",
.handler = &ublast_firmware_command,
.mode = COMMAND_CONFIG,
.help = "configure the USB-Blaster II firmware location",
COMMAND_REGISTRATION_DONE
};
+static const struct command_registration ublast_command_handlers[] = {
+ {
+ .name = "usb_blaster",
+ .mode = COMMAND_ANY,
+ .help = "perform usb_blaster management",
+ .chain = ublast_subcommand_handlers,
+ .usage = "",
+ },
+ COMMAND_REGISTRATION_DONE
+};
+
static struct jtag_interface usb_blaster_interface = {
.supported = DEBUG_CAP_TMS_SEQ,
.execute_queue = ublast_execute_queue,
projects / fw / openocd / blobdiff