openocd: fix SPDX tag format for files .c

[fw/openocd] / src / jtag / drivers / ulink.c

diff --git a/src/jtag/drivers/ulink.c b/src/jtag/drivers/ulink.c
index 3ae5cac620ee72b4a9cbab23ca048f4395f20e09..fd29f126e2de769c9d33b28bec6e43532b797b3e 100644 (file)
--- a/src/jtag/drivers/ulink.c
+++ b/src/jtag/drivers/ulink.c
@@ -1,19 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
 /***************************************************************************
  *   Copyright (C) 2011-2013 by Martin Schmoelzer                          *
  *   <martin.schmoelzer@student.tuwien.ac.at>                              *
- *                                                                         *
- *   This program is free software; you can redistribute it and/or modify  *
- *   it under the terms of the GNU General Public License as published by  *
- *   the Free Software Foundation; either version 2 of the License, or     *
- *   (at your option) any later version.                                   *
- *                                                                         *
- *   This program is distributed in the hope that it will be useful,       *
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- *   GNU General Public License for more details.                          *
- *                                                                         *
- *   You should have received a copy of the GNU General Public License     *
- *   along with this program.  If not, see <http://www.gnu.org/licenses/>. *
  ***************************************************************************/
 
 #ifdef HAVE_CONFIG_H
@@ -56,9 +45,6 @@
 /** USB interface number */
 #define USB_INTERFACE            0
 
-/** libusb timeout in ms */
-#define USB_TIMEOUT              5000
-
 /** Delay (in microseconds) to wait while EZ-USB performs ReNumeration. */
 #define ULINK_RENUMERATION_DELAY 1500000
 
@@ -335,7 +321,7 @@ static int ulink_cpu_reset(struct ulink *device, unsigned char reset_bit)
 
        ret = libusb_control_transfer(device->usb_device_handle,
                        (LIBUSB_ENDPOINT_OUT | LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_DEVICE),
-                       REQUEST_FIRMWARE_LOAD, CPUCS_REG, 0, &reset_bit, 1, USB_TIMEOUT);
+                       REQUEST_FIRMWARE_LOAD, CPUCS_REG, 0, &reset_bit, 1, LIBUSB_TIMEOUT_MS);
 
        /* usb_control_msg() returns the number of bytes transferred during the
         * DATA stage of the control transfer - must be exactly 1 in this case! */
@@ -478,7 +464,7 @@ static int ulink_write_firmware_section(struct ulink *device,
                ret = libusb_control_transfer(device->usb_device_handle,
                                (LIBUSB_ENDPOINT_OUT | LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_DEVICE),
                                REQUEST_FIRMWARE_LOAD, addr, FIRMWARE_ADDR, (unsigned char *)data_ptr,
-                               chunk_size, USB_TIMEOUT);
+                               chunk_size, LIBUSB_TIMEOUT_MS);
 
                if (ret != (int)chunk_size) {
                        /* Abort if libusb sent less data than requested */
@@ -604,8 +590,6 @@ static int ulink_get_queue_size(struct ulink *device,
  * Clear the OpenULINK command queue.
  *
  * @param device pointer to struct ulink identifying ULINK driver instance.
- * @return on success: ERROR_OK
- * @return on failure: ERROR_FAIL
  */
 static void ulink_clear_queue(struct ulink *device)
 {
@@ -664,7 +648,7 @@ static int ulink_append_queue(struct ulink *device, struct ulink_cmd *ulink_cmd)
        if ((newsize_out > 64) || (newsize_in > 64)) {
                /* New command does not fit. Execute all commands in queue before starting
                 * new queue with the current command as first entry. */
-               ret = ulink_execute_queued_commands(device, USB_TIMEOUT);
+               ret = ulink_execute_queued_commands(device, LIBUSB_TIMEOUT_MS);
 
                if (ret == ERROR_OK)
                        ret = ulink_post_process_queue(device);
@@ -1962,7 +1946,7 @@ static int ulink_execute_queue(void)
        }
 
        if (ulink_handle->commands_in_queue > 0) {
-               ret = ulink_execute_queued_commands(ulink_handle, USB_TIMEOUT);
+               ret = ulink_execute_queued_commands(ulink_handle, LIBUSB_TIMEOUT_MS);
                if (ret != ERROR_OK)
                        return ret;