#define STLINK_DEBUG_APIV2_STOP_TRACE_RX 0x41
#define STLINK_DEBUG_APIV2_GET_TRACE_NB 0x42
#define STLINK_DEBUG_APIV2_SWD_SET_FREQ 0x43
+#define STLINK_DEBUG_APIV2_JTAG_SET_FREQ 0x44
#define STLINK_DEBUG_APIV2_DRIVE_NRST_LOW 0x00
#define STLINK_DEBUG_APIV2_DRIVE_NRST_HIGH 0x01
#define REQUEST_SENSE 0x03
#define REQUEST_SENSE_LENGTH 18
-static const struct {
+struct speed_map {
int speed;
int speed_divisor;
-} stlink_khz_to_speed_map[] = {
+};
+
+/* SWD clock speed */
+static const struct speed_map stlink_khz_to_speed_map_swd[] = {
{4000, 0},
{1800, 1}, /* default */
{1200, 2},
{5, 798}
};
+/* JTAG clock speed */
+static const struct speed_map stlink_khz_to_speed_map_jtag[] = {
+ {18000, 2},
+ {9000, 4},
+ {4500, 8},
+ {2250, 16},
+ {1125, 32}, /* default */
+ {562, 64},
+ {281, 128},
+ {140, 256}
+};
+
static void stlink_usb_init_buffer(void *handle, uint8_t direction, uint32_t size);
static int stlink_swim_status(void *handle);
return ERROR_OK;
}
+static int stlink_usb_set_jtagclk(void *handle, uint16_t clk_divisor)
+{
+ struct stlink_usb_handle_s *h = handle;
+
+ assert(handle != NULL);
+
+ /* only supported by stlink/v2 and for firmware >= 24 */
+ if (h->version.stlink == 1 || h->version.jtag < 24)
+ return ERROR_COMMAND_NOTFOUND;
+
+ stlink_usb_init_buffer(handle, h->rx_ep, 2);
+
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_JTAG_SET_FREQ;
+ h_u16_to_le(h->cmdbuf+h->cmdidx, clk_divisor);
+ h->cmdidx += 2;
+
+ int result = stlink_cmd_allow_retry(handle, h->databuf, 2);
+
+ if (result != ERROR_OK)
+ return result;
+
+ return ERROR_OK;
+}
+
/** */
static int stlink_usb_current_mode(void *handle, uint8_t *mode)
{
return !strcmp(targetname, "cortex_m");
}
-static int stlink_speed(void *handle, int khz, bool query)
+static int stlink_speed_swim(void *handle, int khz, bool query)
{
- unsigned i;
- int speed_index = -1;
- int speed_diff = INT_MAX;
- struct stlink_usb_handle_s *h = handle;
-
- if (h && (h->transport == HL_TRANSPORT_SWIM)) {
- /*
+ /*
we dont care what the khz rate is
we only have low and high speed...
before changing speed the SWIM_CSR HS bit
must be updated
- */
- if (khz == 0)
- stlink_swim_speed(handle, 0);
- else
- stlink_swim_speed(handle, 1);
- return khz;
- }
+ */
+ if (khz == 0)
+ stlink_swim_speed(handle, 0);
+ else
+ stlink_swim_speed(handle, 1);
+ return khz;
+}
- /* only supported by stlink/v2 and for firmware >= 22 */
- if (h && (h->version.stlink == 1 || h->version.jtag < 22))
- return khz;
+static int stlink_match_speed_map(const struct speed_map *map, unsigned int map_size, int khz, bool query)
+{
+ unsigned int i;
+ int speed_index = -1;
+ int speed_diff = INT_MAX;
+ bool match = true;
- for (i = 0; i < ARRAY_SIZE(stlink_khz_to_speed_map); i++) {
- if (khz == stlink_khz_to_speed_map[i].speed) {
+ for (i = 0; i < map_size; i++) {
+ if (khz == map[i].speed) {
speed_index = i;
break;
} else {
- int current_diff = khz - stlink_khz_to_speed_map[i].speed;
+ int current_diff = khz - map[i].speed;
/* get abs value for comparison */
current_diff = (current_diff > 0) ? current_diff : -current_diff;
- if ((current_diff < speed_diff) && khz >= stlink_khz_to_speed_map[i].speed) {
+ if ((current_diff < speed_diff) && khz >= map[i].speed) {
speed_diff = current_diff;
speed_index = i;
}
}
}
- bool match = true;
-
if (speed_index == -1) {
/* this will only be here if we cannot match the slow speed.
* use the slowest speed we support.*/
- speed_index = ARRAY_SIZE(stlink_khz_to_speed_map) - 1;
+ speed_index = map_size - 1;
match = false;
- } else if (i == ARRAY_SIZE(stlink_khz_to_speed_map))
+ } else if (i == map_size)
match = false;
if (!match && query) {
LOG_INFO("Unable to match requested speed %d kHz, using %d kHz", \
- khz, stlink_khz_to_speed_map[speed_index].speed);
+ khz, map[speed_index].speed);
+ }
+
+ return speed_index;
+}
+
+static int stlink_speed_swd(void *handle, int khz, bool query)
+{
+ int speed_index;
+ struct stlink_usb_handle_s *h = handle;
+
+ /* only supported by stlink/v2 and for firmware >= 22 */
+ if (h->version.stlink == 1 || h->version.jtag < 22)
+ return khz;
+
+ speed_index = stlink_match_speed_map(stlink_khz_to_speed_map_swd,
+ ARRAY_SIZE(stlink_khz_to_speed_map_swd), khz, query);
+
+ if (!query) {
+ int result = stlink_usb_set_swdclk(h, stlink_khz_to_speed_map_swd[speed_index].speed_divisor);
+ if (result != ERROR_OK) {
+ LOG_ERROR("Unable to set adapter speed");
+ return khz;
+ }
}
- if (h && !query) {
- int result = stlink_usb_set_swdclk(h, stlink_khz_to_speed_map[speed_index].speed_divisor);
+ return stlink_khz_to_speed_map_swd[speed_index].speed;
+}
+
+static int stlink_speed_jtag(void *handle, int khz, bool query)
+{
+ int speed_index;
+ struct stlink_usb_handle_s *h = handle;
+
+ /* only supported by stlink/v2 and for firmware >= 24 */
+ if (h->version.stlink == 1 || h->version.jtag < 24)
+ return khz;
+
+ speed_index = stlink_match_speed_map(stlink_khz_to_speed_map_jtag,
+ ARRAY_SIZE(stlink_khz_to_speed_map_jtag), khz, query);
+
+ if (!query) {
+ int result = stlink_usb_set_jtagclk(h, stlink_khz_to_speed_map_jtag[speed_index].speed_divisor);
if (result != ERROR_OK) {
LOG_ERROR("Unable to set adapter speed");
return khz;
}
}
- return stlink_khz_to_speed_map[speed_index].speed;
+ return stlink_khz_to_speed_map_jtag[speed_index].speed;
+}
+
+void stlink_dump_speed_map(const struct speed_map *map, unsigned int map_size)
+{
+ unsigned int i;
+
+ LOG_DEBUG("Supported clock speeds are:");
+ for (i = 0; i < map_size; i++)
+ LOG_DEBUG("%d kHz", map[i].speed);
+}
+
+static int stlink_speed(void *handle, int khz, bool query)
+{
+ struct stlink_usb_handle_s *h = handle;
+
+ if (!handle)
+ return khz;
+
+ if (h->transport == HL_TRANSPORT_SWIM)
+ return stlink_speed_swim(handle, khz, query);
+ else if (h->transport == HL_TRANSPORT_SWD)
+ return stlink_speed_swd(handle, khz, query);
+ else if (h->transport == HL_TRANSPORT_JTAG)
+ return stlink_speed_jtag(handle, khz, query);
+
+ return khz;
}
/** */
return ERROR_OK;
}
- /* clock speed only supported by stlink/v2 and for firmware >= 22 */
- if (h->version.stlink >= 2 && h->version.jtag >= 22) {
- LOG_DEBUG("Supported clock speeds are:");
-
- for (unsigned i = 0; i < ARRAY_SIZE(stlink_khz_to_speed_map); i++)
- LOG_DEBUG("%d kHz", stlink_khz_to_speed_map[i].speed);
-
- stlink_speed(h, param->initial_interface_speed, false);
+ if (h->transport == HL_TRANSPORT_JTAG) {
+ /* jtag clock speed only supported by stlink/v2 and for firmware >= 24 */
+ if (h->version.stlink >= 2 && h->version.jtag >= 24) {
+ stlink_dump_speed_map(stlink_khz_to_speed_map_jtag, ARRAY_SIZE(stlink_khz_to_speed_map_jtag));
+ stlink_speed(h, param->initial_interface_speed, false);
+ }
+ } else if (h->transport == HL_TRANSPORT_SWD) {
+ /* clock speed only supported by stlink/v2 and for firmware >= 22 */
+ if (h->version.stlink >= 2 && h->version.jtag >= 22) {
+ stlink_dump_speed_map(stlink_khz_to_speed_map_swd, ARRAY_SIZE(stlink_khz_to_speed_map_swd));
+ stlink_speed(h, param->initial_interface_speed, false);
+ }
}
/* get cpuid, so we can determine the max page size
projects / fw / openocd / blobdiff