/***************************************************************************
+ * Copyright (C) 2020 by Tarek Bochkati *
+ * Tarek Bochkati <tarek.bouchkati@gmail.com> *
+ * *
* SWIM contributions by Ake Rehnman *
* Copyright (C) 2017 Ake Rehnman *
* ake.rehnman(at)gmail.com *
#endif
/* project specific includes */
+#include <helper/align.h>
#include <helper/binarybuffer.h>
+#include <helper/bits.h>
+#include <helper/system.h>
+#include <helper/time_support.h>
+#include <jtag/adapter.h>
#include <jtag/interface.h>
#include <jtag/hla/hla_layout.h>
#include <jtag/hla/hla_transport.h>
#include <jtag/hla/hla_interface.h>
+#include <jtag/swim.h>
+#include <target/arm_adi_v5.h>
#include <target/target.h>
+#include <transport/transport.h>
#include <target/cortex_m.h>
-#include "libusb_common.h"
+#include <helper/system.h>
+
+#ifdef HAVE_ARPA_INET_H
+#include <arpa/inet.h>
+#endif
+
+#ifdef HAVE_NETINET_TCP_H
+#include <netinet/tcp.h>
+#endif
+
+#include "libusb_helper.h"
#ifdef HAVE_LIBUSB1
#define USE_LIBUSB_ASYNCIO
#endif
+#define STLINK_SERIAL_LEN 24
+
#define ENDPOINT_IN 0x80
#define ENDPOINT_OUT 0x00
#define STLINK_WRITE_TIMEOUT 1000
#define STLINK_READ_TIMEOUT 1000
-#define STLINK_NULL_EP 0
#define STLINK_RX_EP (1|ENDPOINT_IN)
#define STLINK_TX_EP (2|ENDPOINT_OUT)
#define STLINK_TRACE_EP (3|ENDPOINT_IN)
#define STLINK_V2_1_TRACE_EP (2|ENDPOINT_IN)
#define STLINK_SG_SIZE (31)
-#define STLINK_DATA_SIZE (4096)
+#define STLINK_DATA_SIZE (6144)
#define STLINK_CMD_SIZE_V2 (16)
#define STLINK_CMD_SIZE_V1 (10)
#define STLINK_V3E_PID (0x374E)
#define STLINK_V3S_PID (0x374F)
#define STLINK_V3_2VCP_PID (0x3753)
+#define STLINK_V3E_NO_MSD_PID (0x3754)
/*
* ST-Link/V1, ST-Link/V2 and ST-Link/V2.1 are full-speed USB devices and
* this limits the bulk packet size and the 8bit read/writes to max 64 bytes.
- * STLINK-V3 is a high speed USB 2.0 and the limit is 512 bytes.
+ * STLINK-V3 is a high speed USB 2.0 and the limit is 512 bytes from FW V3J6.
+ *
+ * For 16 and 32bit read/writes stlink handles USB packet split and the limit
+ * is the internal buffer size of 6144 bytes.
+ * TODO: override ADIv5 layer's tar_autoincr_block that limits the transfer
+ * to 1024 or 4096 bytes
*/
-#define STLINK_MAX_RW8 (64)
-#define STLINKV3_MAX_RW8 (512)
+#define STLINK_MAX_RW8 (64)
+#define STLINKV3_MAX_RW8 (512)
+#define STLINK_MAX_RW16_32 STLINK_DATA_SIZE
+#define STLINK_SWIM_DATA_SIZE STLINK_DATA_SIZE
/* "WAIT" responses will be retried (with exponential backoff) at
* most this many times before failing to caller.
*/
#define MAX_WAIT_RETRIES 8
+/* HLA is currently limited at AP#0 and no control on CSW */
+#define STLINK_HLA_AP_NUM 0
+#define STLINK_HLA_CSW 0
+
enum stlink_jtag_api_version {
STLINK_JTAG_API_V1 = 1,
STLINK_JTAG_API_V2,
STLINK_JTAG_API_V3,
};
+enum stlink_mode {
+ STLINK_MODE_UNKNOWN = 0,
+ STLINK_MODE_DFU,
+ STLINK_MODE_MASS,
+ STLINK_MODE_DEBUG_JTAG,
+ STLINK_MODE_DEBUG_SWD,
+ STLINK_MODE_DEBUG_SWIM
+};
+
/** */
struct stlink_usb_version {
/** */
uint32_t flags;
};
+struct stlink_usb_priv_s {
+ /** */
+ struct libusb_device_handle *fd;
+ /** */
+ struct libusb_transfer *trans;
+};
+
+struct stlink_tcp_version {
+ uint32_t api;
+ uint32_t major;
+ uint32_t minor;
+ uint32_t build;
+};
+
+struct stlink_tcp_priv_s {
+ /** */
+ int fd;
+ /** */
+ bool connected;
+ /** */
+ uint32_t device_id;
+ /** */
+ uint32_t connect_id;
+ /** */
+ uint8_t *send_buf;
+ /** */
+ uint8_t *recv_buf;
+ /** */
+ struct stlink_tcp_version version;
+};
+
+struct stlink_backend_s {
+ /** */
+ int (*open)(void *handle, struct hl_interface_param_s *param);
+ /** */
+ int (*close)(void *handle);
+ /** */
+ int (*xfer_noerrcheck)(void *handle, const uint8_t *buf, int size);
+ /** */
+ int (*read_trace)(void *handle, const uint8_t *buf, int size);
+};
+
+/* TODO: make queue size dynamic */
+/* TODO: don't allocate queue for HLA */
+#define MAX_QUEUE_DEPTH (4096)
+
+enum queue_cmd {
+ CMD_DP_READ = 1,
+ CMD_DP_WRITE,
+
+ CMD_AP_READ,
+ CMD_AP_WRITE,
+
+ /*
+ * encode the bytes size in the enum's value. This makes easy to extract it
+ * with a simple logic AND, by using the macro CMD_MEM_AP_2_SIZE() below
+ */
+ CMD_MEM_AP_READ8 = 0x10 + 1,
+ CMD_MEM_AP_READ16 = 0x10 + 2,
+ CMD_MEM_AP_READ32 = 0x10 + 4,
+
+ CMD_MEM_AP_WRITE8 = 0x20 + 1,
+ CMD_MEM_AP_WRITE16 = 0x20 + 2,
+ CMD_MEM_AP_WRITE32 = 0x20 + 4,
+};
+
+#define CMD_MEM_AP_2_SIZE(cmd) ((cmd) & 7)
+
+struct dap_queue {
+ enum queue_cmd cmd;
+ union {
+ struct dp_r {
+ unsigned int reg;
+ struct adiv5_dap *dap;
+ uint32_t *p_data;
+ } dp_r;
+ struct dp_w {
+ unsigned int reg;
+ struct adiv5_dap *dap;
+ uint32_t data;
+ } dp_w;
+ struct ap_r {
+ unsigned int reg;
+ struct adiv5_ap *ap;
+ uint32_t *p_data;
+ } ap_r;
+ struct ap_w {
+ unsigned int reg;
+ struct adiv5_ap *ap;
+ uint32_t data;
+ bool changes_csw_default;
+ } ap_w;
+ struct mem_ap {
+ uint32_t addr;
+ struct adiv5_ap *ap;
+ union {
+ uint32_t *p_data;
+ uint32_t data;
+ };
+ uint32_t csw;
+ } mem_ap;
+ };
+};
+
/** */
struct stlink_usb_handle_s {
/** */
- struct jtag_libusb_device_handle *fd;
+ struct stlink_backend_s *backend;
/** */
- struct libusb_transfer *trans;
+ union {
+ struct stlink_usb_priv_s usb_backend_priv;
+ struct stlink_tcp_priv_s tcp_backend_priv;
+ };
/** */
uint8_t rx_ep;
/** */
/** */
uint8_t trace_ep;
/** */
- uint8_t cmdbuf[STLINK_SG_SIZE];
+ uint8_t *cmdbuf;
/** */
uint8_t cmdidx;
/** */
uint8_t direction;
/** */
- uint8_t databuf[STLINK_DATA_SIZE];
+ uint8_t *databuf;
/** */
uint32_t max_mem_packet;
/** */
- enum hl_transports transport;
+ enum stlink_mode st_mode;
/** */
struct stlink_usb_version version;
/** */
/** reconnect is needed next time we try to query the
* status */
bool reconnect_pending;
+ /** queue of dap_direct operations */
+ struct dap_queue queue[MAX_QUEUE_DEPTH];
+ /** first element available in the queue */
+ unsigned int queue_index;
};
+/** */
+static inline int stlink_usb_open(void *handle, struct hl_interface_param_s *param)
+{
+ struct stlink_usb_handle_s *h = handle;
+ return h->backend->open(handle, param);
+}
+
+/** */
+static inline int stlink_usb_close(void *handle)
+{
+ struct stlink_usb_handle_s *h = handle;
+ return h->backend->close(handle);
+}
+/** */
+static inline int stlink_usb_xfer_noerrcheck(void *handle, const uint8_t *buf, int size)
+{
+ struct stlink_usb_handle_s *h = handle;
+ return h->backend->xfer_noerrcheck(handle, buf, size);
+}
+
#define STLINK_SWIM_ERR_OK 0x00
#define STLINK_SWIM_BUSY 0x01
#define STLINK_DEBUG_ERR_OK 0x80
#define STLINK_SWD_AP_FAULT 0x11
#define STLINK_SWD_AP_ERROR 0x12
#define STLINK_SWD_AP_PARITY_ERROR 0x13
+#define STLINK_JTAG_GET_IDCODE_ERROR 0x09
#define STLINK_JTAG_WRITE_ERROR 0x0c
#define STLINK_JTAG_WRITE_VERIF_ERROR 0x0d
#define STLINK_SWD_DP_WAIT 0x14
#define STLINK_SWD_AP_STICKY_ERROR 0x19
#define STLINK_SWD_AP_STICKYORUN_ERROR 0x1a
+#define STLINK_BAD_AP_ERROR 0x1d
+
#define STLINK_CORE_RUNNING 0x80
#define STLINK_CORE_HALTED 0x81
#define STLINK_CORE_STAT_UNKNOWN -1
uint32_t address
STLINK_SWIM_RESET
- send syncronization seq (16us low, response 64 clocks low)
+ send synchronization seq (16us low, response 64 clocks low)
*/
#define STLINK_SWIM_ENTER 0x00
#define STLINK_SWIM_EXIT 0x01
#define STLINK_DEBUG_APIV2_GET_TRACE_NB 0x42
#define STLINK_DEBUG_APIV2_SWD_SET_FREQ 0x43
#define STLINK_DEBUG_APIV2_JTAG_SET_FREQ 0x44
-
+#define STLINK_DEBUG_APIV2_READ_DAP_REG 0x45
+#define STLINK_DEBUG_APIV2_WRITE_DAP_REG 0x46
#define STLINK_DEBUG_APIV2_READMEM_16BIT 0x47
#define STLINK_DEBUG_APIV2_WRITEMEM_16BIT 0x48
+#define STLINK_DEBUG_APIV2_INIT_AP 0x4B
+#define STLINK_DEBUG_APIV2_CLOSE_AP_DBG 0x4C
+
+#define STLINK_DEBUG_WRITEMEM_32BIT_NO_ADDR_INC 0x50
+#define STLINK_DEBUG_APIV2_RW_MISC_OUT 0x51
+#define STLINK_DEBUG_APIV2_RW_MISC_IN 0x52
+
+#define STLINK_DEBUG_READMEM_32BIT_NO_ADDR_INC 0x54
+
#define STLINK_APIV3_SET_COM_FREQ 0x61
#define STLINK_APIV3_GET_COM_FREQ 0x62
#define STLINK_DEBUG_APIV2_DRIVE_NRST_HIGH 0x01
#define STLINK_DEBUG_APIV2_DRIVE_NRST_PULSE 0x02
+#define STLINK_DEBUG_PORT_ACCESS 0xffff
+
#define STLINK_TRACE_SIZE 4096
#define STLINK_TRACE_MAX_HZ 2000000
+#define STLINK_V3_TRACE_MAX_HZ 24000000
#define STLINK_V3_MAX_FREQ_NB 10
-/** */
-enum stlink_mode {
- STLINK_MODE_UNKNOWN = 0,
- STLINK_MODE_DFU,
- STLINK_MODE_MASS,
- STLINK_MODE_DEBUG_JTAG,
- STLINK_MODE_DEBUG_SWD,
- STLINK_MODE_DEBUG_SWIM
-};
-
#define REQUEST_SENSE 0x03
#define REQUEST_SENSE_LENGTH 18
+/* STLINK TCP commands */
+#define STLINK_TCP_CMD_REFRESH_DEVICE_LIST 0x00
+#define STLINK_TCP_CMD_GET_NB_DEV 0x01
+#define STLINK_TCP_CMD_GET_DEV_INFO 0x02
+#define STLINK_TCP_CMD_OPEN_DEV 0x03
+#define STLINK_TCP_CMD_CLOSE_DEV 0x04
+#define STLINK_TCP_CMD_SEND_USB_CMD 0x05
+#define STLINK_TCP_CMD_GET_SERVER_VERSION 0x06
+#define STLINK_TCP_CMD_GET_NB_OF_DEV_CLIENTS 0x07
+
+/* STLINK TCP constants */
+#define OPENOCD_STLINK_TCP_API_VERSION 1
+#define STLINK_TCP_REQUEST_WRITE 0
+#define STLINK_TCP_REQUEST_READ 1
+#define STLINK_TCP_REQUEST_READ_SWO 3
+#define STLINK_TCP_SS_SIZE 4
+#define STLINK_TCP_USB_CMD_SIZE 32
+#define STLINK_TCP_SERIAL_SIZE 32
+#define STLINK_TCP_SEND_BUFFER_SIZE 10240
+#define STLINK_TCP_RECV_BUFFER_SIZE 10240
+
+/* STLINK TCP command status */
+#define STLINK_TCP_SS_OK 0x00000001
+#define STLINK_TCP_SS_MEMORY_PROBLEM 0x00001000
+#define STLINK_TCP_SS_TIMEOUT 0x00001001
+#define STLINK_TCP_SS_BAD_PARAMETER 0x00001002
+#define STLINK_TCP_SS_OPEN_ERR 0x00001003
+#define STLINK_TCP_SS_TRUNCATED_DATA 0x00001052
+#define STLINK_TCP_SS_CMD_NOT_AVAILABLE 0x00001053
+#define STLINK_TCP_SS_TCP_ERROR 0x00002001
+#define STLINK_TCP_SS_TCP_CANT_CONNECT 0x00002002
+#define STLINK_TCP_SS_WIN32_ERROR 0x00010000
+
/*
* Map the relevant features, quirks and workaround for specific firmware
* version of stlink
*/
-#define STLINK_F_HAS_TRACE (1UL << 0)
-#define STLINK_F_HAS_SWD_SET_FREQ (1UL << 1)
-#define STLINK_F_HAS_JTAG_SET_FREQ (1UL << 2)
-#define STLINK_F_HAS_MEM_16BIT (1UL << 3)
-#define STLINK_F_HAS_GETLASTRWSTATUS2 (1UL << 4)
+#define STLINK_F_HAS_TRACE BIT(0) /* v2>=j13 || v3 */
+#define STLINK_F_HAS_GETLASTRWSTATUS2 BIT(1) /* v2>=j15 || v3 */
+#define STLINK_F_HAS_SWD_SET_FREQ BIT(2) /* v2>=j22 */
+#define STLINK_F_HAS_JTAG_SET_FREQ BIT(3) /* v2>=j24 */
+#define STLINK_F_QUIRK_JTAG_DP_READ BIT(4) /* v2>=j24 && v2<j32 */
+#define STLINK_F_HAS_DAP_REG BIT(5) /* v2>=j24 || v3 */
+#define STLINK_F_HAS_MEM_16BIT BIT(6) /* v2>=j26 || v3 */
+#define STLINK_F_HAS_AP_INIT BIT(7) /* v2>=j28 || v3 */
+#define STLINK_F_FIX_CLOSE_AP BIT(8) /* v2>=j29 || v3 */
+#define STLINK_F_HAS_DPBANKSEL BIT(9) /* v2>=j32 || v3>=j2 */
+#define STLINK_F_HAS_RW8_512BYTES BIT(10) /* v3>=j6 */
/* aliases */
#define STLINK_F_HAS_TARGET_VOLT STLINK_F_HAS_TRACE
+#define STLINK_F_HAS_FPU_REG STLINK_F_HAS_GETLASTRWSTATUS2
+#define STLINK_F_HAS_MEM_WR_NO_INC STLINK_F_HAS_MEM_16BIT
+#define STLINK_F_HAS_MEM_RD_NO_INC STLINK_F_HAS_DPBANKSEL
+#define STLINK_F_HAS_RW_MISC STLINK_F_HAS_DPBANKSEL
+#define STLINK_F_HAS_CSW STLINK_F_HAS_DPBANKSEL
+
+#define STLINK_REGSEL_IS_FPU(x) ((x) > 0x1F)
struct speed_map {
int speed;
/* JTAG clock speed */
static const struct speed_map stlink_khz_to_speed_map_jtag[] = {
- {18000, 2},
{9000, 4},
{4500, 8},
{2250, 16},
static void stlink_usb_init_buffer(void *handle, uint8_t direction, uint32_t size);
static int stlink_swim_status(void *handle);
+static void stlink_dump_speed_map(const struct speed_map *map, unsigned int map_size);
+static int stlink_get_com_freq(void *handle, bool is_jtag, struct speed_map *map);
+static int stlink_speed(void *handle, int khz, bool query);
+static int stlink_usb_open_ap(void *handle, unsigned short apsel);
/** */
static unsigned int stlink_usb_block(void *handle)
{
struct stlink_usb_handle_s *h = handle;
- assert(handle != NULL);
+ assert(handle);
- if (h->version.stlink == 3)
+ if (h->version.flags & STLINK_F_HAS_RW8_512BYTES)
return STLINKV3_MAX_RW8;
else
return STLINK_MAX_RW8;
}
-
-
#ifdef USE_LIBUSB_ASYNCIO
static LIBUSB_CALL void sync_transfer_cb(struct libusb_transfer *transfer)
{
int r, *completed = transfer->user_data;
- /* Assuming a single libusb context exists. There no existing interface into this
- * module to pass a libusb context.
- */
- struct libusb_context *ctx = NULL;
-
while (!*completed) {
- r = libusb_handle_events_completed(ctx, completed);
+ r = jtag_libusb_handle_events_completed(completed);
if (r < 0) {
if (r == LIBUSB_ERROR_INTERRUPTED)
continue;
};
static int jtag_libusb_bulk_transfer_n(
- jtag_libusb_device_handle * dev_handle,
+ struct libusb_device_handle *dev_handle,
struct jtag_xfer *transfers,
size_t n_transfers,
int timeout)
transfers[i].transfer_size = 0;
transfers[i].transfer = libusb_alloc_transfer(0);
- if (transfers[i].transfer == NULL) {
+ if (!transfers[i].transfer) {
for (size_t j = 0; j < i; ++j)
libusb_free_transfer(transfers[j].transfer);
static int stlink_usb_xfer_v1_get_status(void *handle)
{
struct stlink_usb_handle_s *h = handle;
+ int tr, ret;
- assert(handle != NULL);
+ assert(handle);
/* read status */
memset(h->cmdbuf, 0, STLINK_SG_SIZE);
- if (jtag_libusb_bulk_read(h->fd, h->rx_ep, (char *)h->cmdbuf,
- 13, STLINK_READ_TIMEOUT) != 13)
+ ret = jtag_libusb_bulk_read(h->usb_backend_priv.fd, h->rx_ep, (char *)h->cmdbuf, 13,
+ STLINK_READ_TIMEOUT, &tr);
+ if (ret || tr != 13)
return ERROR_FAIL;
uint32_t t1;
{
struct stlink_usb_handle_s *h = handle;
- assert(handle != NULL);
+ assert(handle);
size_t n_transfers = 0;
struct jtag_xfer transfers[2];
}
return jtag_libusb_bulk_transfer_n(
- h->fd,
+ h->usb_backend_priv.fd,
transfers,
n_transfers,
STLINK_WRITE_TIMEOUT);
static int stlink_usb_xfer_rw(void *handle, int cmdsize, const uint8_t *buf, int size)
{
struct stlink_usb_handle_s *h = handle;
+ int tr, ret;
- assert(handle != NULL);
+ assert(handle);
- if (jtag_libusb_bulk_write(h->fd, h->tx_ep, (char *)h->cmdbuf, cmdsize,
- STLINK_WRITE_TIMEOUT) != cmdsize) {
+ ret = jtag_libusb_bulk_write(h->usb_backend_priv.fd, h->tx_ep, (char *)h->cmdbuf,
+ cmdsize, STLINK_WRITE_TIMEOUT, &tr);
+ if (ret || tr != cmdsize)
return ERROR_FAIL;
- }
if (h->direction == h->tx_ep && size) {
- if (jtag_libusb_bulk_write(h->fd, h->tx_ep, (char *)buf,
- size, STLINK_WRITE_TIMEOUT) != size) {
+ ret = jtag_libusb_bulk_write(h->usb_backend_priv.fd, h->tx_ep, (char *)buf,
+ size, STLINK_WRITE_TIMEOUT, &tr);
+ if (ret || tr != size) {
LOG_DEBUG("bulk write failed");
return ERROR_FAIL;
}
} else if (h->direction == h->rx_ep && size) {
- if (jtag_libusb_bulk_read(h->fd, h->rx_ep, (char *)buf,
- size, STLINK_READ_TIMEOUT) != size) {
+ ret = jtag_libusb_bulk_read(h->usb_backend_priv.fd, h->rx_ep, (char *)buf,
+ size, STLINK_READ_TIMEOUT, &tr);
+ if (ret || tr != size) {
LOG_DEBUG("bulk read failed");
return ERROR_FAIL;
}
int res;
struct stlink_usb_handle_s *h = handle;
- assert(handle != NULL);
+ assert(handle);
stlink_usb_init_buffer(handle, h->rx_ep, 16);
return ERROR_OK;
}
+/** */
+static int stlink_usb_usb_read_trace(void *handle, const uint8_t *buf, int size)
+{
+ struct stlink_usb_handle_s *h = handle;
+ int tr, ret;
+
+ ret = jtag_libusb_bulk_read(h->usb_backend_priv.fd, h->trace_ep, (char *)buf, size,
+ STLINK_READ_TIMEOUT, &tr);
+ if (ret || tr != size) {
+ LOG_ERROR("bulk trace read failed");
+ return ERROR_FAIL;
+ }
+
+ return ERROR_OK;
+}
+
/*
transfers block in cmdbuf
<size> indicates number of bytes in the following
data phase.
+ Ignore the (eventual) error code in the received packet.
*/
-static int stlink_usb_xfer(void *handle, const uint8_t *buf, int size)
+static int stlink_usb_usb_xfer_noerrcheck(void *handle, const uint8_t *buf, int size)
{
int err, cmdsize = STLINK_CMD_SIZE_V2;
struct stlink_usb_handle_s *h = handle;
- assert(handle != NULL);
+ assert(handle);
if (h->version.stlink == 1) {
cmdsize = STLINK_SG_SIZE;
return ERROR_OK;
}
+
+static int stlink_tcp_send_cmd(void *handle, int send_size, int recv_size, bool check_tcp_status)
+{
+ struct stlink_usb_handle_s *h = handle;
+
+ assert(handle);
+
+ /* send the TCP command */
+ int sent_size = send(h->tcp_backend_priv.fd, (void *)h->tcp_backend_priv.send_buf, send_size, 0);
+ if (sent_size != send_size) {
+ LOG_ERROR("failed to send USB CMD");
+ if (sent_size == -1)
+ LOG_DEBUG("socket send error: %s (errno %d)", strerror(errno), errno);
+ else
+ LOG_DEBUG("sent size %d (expected %d)", sent_size, send_size);
+ return ERROR_FAIL;
+ }
+
+ /* read the TCP response */
+ int retval = ERROR_OK;
+ int remaining_bytes = recv_size;
+ uint8_t *recv_buf = h->tcp_backend_priv.recv_buf;
+ const int64_t timeout = timeval_ms() + 1000; /* 1 second */
+
+ while (remaining_bytes > 0) {
+ if (timeval_ms() > timeout) {
+ LOG_DEBUG("received size %d (expected %d)", recv_size - remaining_bytes, recv_size);
+ retval = ERROR_TIMEOUT_REACHED;
+ break;
+ }
+
+ keep_alive();
+ int received = recv(h->tcp_backend_priv.fd, (void *)recv_buf, remaining_bytes, 0);
+
+ if (received == -1) {
+ LOG_DEBUG("socket recv error: %s (errno %d)", strerror(errno), errno);
+ retval = ERROR_FAIL;
+ break;
+ }
+
+ recv_buf += received;
+ remaining_bytes -= received;
+ }
+
+ if (retval != ERROR_OK) {
+ LOG_ERROR("failed to receive USB CMD response");
+ return retval;
+ }
+
+ if (check_tcp_status) {
+ uint32_t tcp_ss = le_to_h_u32(h->tcp_backend_priv.recv_buf);
+ if (tcp_ss != STLINK_TCP_SS_OK) {
+ LOG_ERROR("TCP error status 0x%X", tcp_ss);
+ return ERROR_FAIL;
+ }
+ }
+
+ return ERROR_OK;
+}
+
+/** */
+static int stlink_tcp_xfer_noerrcheck(void *handle, const uint8_t *buf, int size)
+{
+ struct stlink_usb_handle_s *h = handle;
+
+ int send_size = STLINK_TCP_USB_CMD_SIZE;
+ int recv_size = STLINK_TCP_SS_SIZE;
+
+ assert(handle);
+
+ /* prepare the TCP command */
+ h->tcp_backend_priv.send_buf[0] = STLINK_TCP_CMD_SEND_USB_CMD;
+ memset(&h->tcp_backend_priv.send_buf[1], 0, 3); /* reserved for alignment and future use, must be zero */
+ h_u32_to_le(&h->tcp_backend_priv.send_buf[4], h->tcp_backend_priv.connect_id);
+ /* tcp_backend_priv.send_buf[8..23] already contains the constructed stlink command */
+ h->tcp_backend_priv.send_buf[24] = h->direction;
+ memset(&h->tcp_backend_priv.send_buf[25], 0, 3); /* reserved for alignment and future use, must be zero */
+
+ h_u32_to_le(&h->tcp_backend_priv.send_buf[28], size);
+
+ /*
+ * if the xfer is a write request (tx_ep)
+ * > then buf content will be copied
+ * into &cmdbuf[32].
+ * else : the xfer is a read or trace read request (rx_ep or trace_ep)
+ * > the buf content will be filled from &databuf[4].
+ *
+ * note : if h->direction is trace_ep, h->cmdbuf is zeros.
+ */
+
+ if (h->direction == h->tx_ep) { /* STLINK_TCP_REQUEST_WRITE */
+ send_size += size;
+ if (send_size > STLINK_TCP_SEND_BUFFER_SIZE) {
+ LOG_ERROR("STLINK_TCP command buffer overflow");
+ return ERROR_FAIL;
+ }
+ memcpy(&h->tcp_backend_priv.send_buf[32], buf, size);
+ } else { /* STLINK_TCP_REQUEST_READ or STLINK_TCP_REQUEST_READ_SWO */
+ recv_size += size;
+ if (recv_size > STLINK_TCP_RECV_BUFFER_SIZE) {
+ LOG_ERROR("STLINK_TCP data buffer overflow");
+ return ERROR_FAIL;
+ }
+ }
+
+ int ret = stlink_tcp_send_cmd(h, send_size, recv_size, true);
+ if (ret != ERROR_OK)
+ return ret;
+
+ if (h->direction != h->tx_ep) {
+ /* the read data is located in tcp_backend_priv.recv_buf[4] */
+ /* most of the case it will be copying the data from tcp_backend_priv.recv_buf[4]
+ * to handle->cmd_buff which are the same, so let's avoid unnecessary copying */
+ if (buf != &h->tcp_backend_priv.recv_buf[4])
+ memcpy((uint8_t *)buf, &h->tcp_backend_priv.recv_buf[4], size);
+ }
+
+ return ERROR_OK;
+}
+
+/** */
+static int stlink_tcp_read_trace(void *handle, const uint8_t *buf, int size)
+{
+ struct stlink_usb_handle_s *h = handle;
+
+ stlink_usb_init_buffer(h, h->trace_ep, 0);
+ return stlink_tcp_xfer_noerrcheck(handle, buf, size);
+}
+
/**
Converts an STLINK status code held in the first byte of a response
to an openocd error, logs any error/wait status as debug output.
{
struct stlink_usb_handle_s *h = handle;
- assert(handle != NULL);
+ assert(handle);
- if (h->transport == HL_TRANSPORT_SWIM) {
+ if (h->st_mode == STLINK_MODE_DEBUG_SWIM) {
switch (h->databuf[0]) {
case STLINK_SWIM_ERR_OK:
return ERROR_OK;
case STLINK_SWD_DP_WAIT:
LOG_DEBUG("wait status SWD_DP_WAIT (0x%x)", STLINK_SWD_DP_WAIT);
return ERROR_WAIT;
+ case STLINK_JTAG_GET_IDCODE_ERROR:
+ LOG_DEBUG("STLINK_JTAG_GET_IDCODE_ERROR");
+ return ERROR_FAIL;
case STLINK_JTAG_WRITE_ERROR:
LOG_DEBUG("Write error");
return ERROR_FAIL;
case STLINK_SWD_AP_STICKYORUN_ERROR:
LOG_DEBUG("STLINK_SWD_AP_STICKYORUN_ERROR");
return ERROR_FAIL;
+ case STLINK_BAD_AP_ERROR:
+ LOG_DEBUG("STLINK_BAD_AP_ERROR");
+ return ERROR_FAIL;
default:
LOG_DEBUG("unknown/unexpected STLINK status code 0x%x", h->databuf[0]);
return ERROR_FAIL;
}
}
+/*
+ * Wrapper around stlink_usb_xfer_noerrcheck()
+ * to check the error code in the received packet
+ */
+static int stlink_usb_xfer_errcheck(void *handle, const uint8_t *buf, int size)
+{
+ int retval;
+
+ assert(size > 0);
+
+ retval = stlink_usb_xfer_noerrcheck(handle, buf, size);
+ if (retval != ERROR_OK)
+ return retval;
+
+ return stlink_usb_error_check(handle);
+}
/** Issue an STLINK command via USB transfer, with retries on any wait status responses.
struct stlink_usb_handle_s *h = handle;
while (1) {
- if ((h->transport != HL_TRANSPORT_SWIM) || !retries) {
- res = stlink_usb_xfer(handle, buf, size);
+ if ((h->st_mode != STLINK_MODE_DEBUG_SWIM) || !retries) {
+ res = stlink_usb_xfer_noerrcheck(handle, buf, size);
if (res != ERROR_OK)
return res;
}
- if (h->transport == HL_TRANSPORT_SWIM) {
+ if (h->st_mode == STLINK_MODE_DEBUG_SWIM) {
res = stlink_swim_status(handle);
if (res != ERROR_OK)
return res;
res = stlink_usb_error_check(handle);
if (res == ERROR_WAIT && retries < MAX_WAIT_RETRIES) {
- useconds_t delay_us = (1<<retries++) * 1000;
+ unsigned int delay_us = (1<<retries++) * 1000;
LOG_DEBUG("stlink_cmd_allow_retry ERROR_WAIT, retry %d, delaying %u microseconds", retries, delay_us);
usleep(delay_us);
continue;
{
struct stlink_usb_handle_s *h = handle;
- assert(handle != NULL);
+ assert(handle);
assert(h->version.flags & STLINK_F_HAS_TRACE);
- if (jtag_libusb_bulk_read(h->fd, h->trace_ep, (char *)buf,
- size, STLINK_READ_TIMEOUT) != size) {
- LOG_ERROR("bulk trace read failed");
- return ERROR_FAIL;
- }
-
- return ERROR_OK;
+ return h->backend->read_trace(handle, buf, size);
}
/*
char *p;
struct stlink_usb_handle_s *h = handle;
- assert(handle != NULL);
+ assert(handle);
stlink_usb_init_buffer(handle, h->rx_ep, 6);
h->cmdbuf[h->cmdidx++] = STLINK_GET_VERSION;
- res = stlink_usb_xfer(handle, h->databuf, 6);
+ res = stlink_usb_xfer_noerrcheck(handle, h->databuf, 6);
if (res != ERROR_OK)
return res;
h->cmdbuf[h->cmdidx++] = STLINK_APIV3_GET_VERSION_EX;
- res = stlink_usb_xfer(handle, h->databuf, 12);
+ res = stlink_usb_xfer_noerrcheck(handle, h->databuf, 12);
if (res != ERROR_OK)
return res;
flags |= STLINK_F_HAS_SWD_SET_FREQ;
/* API to set JTAG frequency from J24 */
- if (h->version.jtag >= 24)
+ /* API to access DAP registers from J24 */
+ if (h->version.jtag >= 24) {
flags |= STLINK_F_HAS_JTAG_SET_FREQ;
+ flags |= STLINK_F_HAS_DAP_REG;
+ }
+
+ /* Quirk for read DP in JTAG mode (V2 only) from J24, fixed in J32 */
+ if (h->version.jtag >= 24 && h->version.jtag < 32)
+ flags |= STLINK_F_QUIRK_JTAG_DP_READ;
/* API to read/write memory at 16 bit from J26 */
+ /* API to write memory without address increment from J26 */
if (h->version.jtag >= 26)
flags |= STLINK_F_HAS_MEM_16BIT;
+ /* API required to init AP before any AP access from J28 */
+ if (h->version.jtag >= 28)
+ flags |= STLINK_F_HAS_AP_INIT;
+
+ /* API required to return proper error code on close AP from J29 */
+ if (h->version.jtag >= 29)
+ flags |= STLINK_F_FIX_CLOSE_AP;
+
+ /* Banked regs (DPv1 & DPv2) support from V2J32 */
+ /* API to read memory without address increment from V2J32 */
+ /* Memory R/W supports CSW from V2J32 */
+ if (h->version.jtag >= 32)
+ flags |= STLINK_F_HAS_DPBANKSEL;
+
break;
case 3:
/* all STLINK-V3 use api-v3 */
/* preferred API to get last R/W status */
flags |= STLINK_F_HAS_GETLASTRWSTATUS2;
+ /* API to access DAP registers */
+ flags |= STLINK_F_HAS_DAP_REG;
+
/* API to read/write memory at 16 bit */
+ /* API to write memory without address increment */
flags |= STLINK_F_HAS_MEM_16BIT;
+ /* API required to init AP before any AP access */
+ flags |= STLINK_F_HAS_AP_INIT;
+
+ /* API required to return proper error code on close AP */
+ flags |= STLINK_F_FIX_CLOSE_AP;
+
+ /* Banked regs (DPv1 & DPv2) support from V3J2 */
+ /* API to read memory without address increment from V3J2 */
+ /* Memory R/W supports CSW from V3J2 */
+ if (h->version.jtag >= 2)
+ flags |= STLINK_F_HAS_DPBANKSEL;
+
+ /* 8bit read/write max packet size 512 bytes from V3J6 */
+ if (h->version.jtag >= 6)
+ flags |= STLINK_F_HAS_RW8_512BYTES;
+
break;
default:
break;
if (bridge)
p += sprintf(p, "B%d", bridge);
if (swim || !msd)
- p += sprintf(p, "S%d", swim);
+ sprintf(p, "S%d", swim);
LOG_INFO("STLINK %s (API v%d) VID:PID %04X:%04X",
v_str,
h->cmdbuf[h->cmdidx++] = STLINK_GET_TARGET_VOLTAGE;
- int result = stlink_usb_xfer(handle, h->databuf, 8);
+ int result = stlink_usb_xfer_noerrcheck(handle, h->databuf, 8);
if (result != ERROR_OK)
return result;
{
struct stlink_usb_handle_s *h = handle;
- assert(handle != NULL);
+ assert(handle);
if (!(h->version.flags & STLINK_F_HAS_SWD_SET_FREQ))
return ERROR_COMMAND_NOTFOUND;
{
struct stlink_usb_handle_s *h = handle;
- assert(handle != NULL);
+ assert(handle);
if (!(h->version.flags & STLINK_F_HAS_JTAG_SET_FREQ))
return ERROR_COMMAND_NOTFOUND;
int res;
struct stlink_usb_handle_s *h = handle;
- assert(handle != NULL);
+ assert(handle);
stlink_usb_init_buffer(handle, h->rx_ep, 2);
h->cmdbuf[h->cmdidx++] = STLINK_GET_CURRENT_MODE;
- res = stlink_usb_xfer(handle, h->databuf, 2);
+ res = stlink_usb_xfer_noerrcheck(handle, h->databuf, 2);
if (res != ERROR_OK)
return res;
int rx_size = 0;
struct stlink_usb_handle_s *h = handle;
- assert(handle != NULL);
+ assert(handle);
/* on api V2 we are able the read the latest command
* status
case STLINK_MODE_DEBUG_SWIM:
h->cmdbuf[h->cmdidx++] = STLINK_SWIM_COMMAND;
h->cmdbuf[h->cmdidx++] = STLINK_SWIM_ENTER;
- /* no answer for this function... */
- rx_size = 0;
- break;
+ /* swim enter does not return any response or status */
+ return stlink_usb_xfer_noerrcheck(handle, h->databuf, 0);
case STLINK_MODE_DFU:
case STLINK_MODE_MASS:
default:
int res;
struct stlink_usb_handle_s *h = handle;
- assert(handle != NULL);
+ assert(handle);
- stlink_usb_init_buffer(handle, STLINK_NULL_EP, 0);
+ /* command with no reply, use a valid endpoint but zero size */
+ stlink_usb_init_buffer(handle, h->rx_ep, 0);
switch (type) {
case STLINK_MODE_DEBUG_JTAG:
return ERROR_FAIL;
}
- res = stlink_usb_xfer(handle, 0, 0);
+ res = stlink_usb_xfer_noerrcheck(handle, h->databuf, 0);
if (res != ERROR_OK)
return res;
return STLINK_MODE_DEBUG_SWD;
case HL_TRANSPORT_JTAG:
return STLINK_MODE_DEBUG_JTAG;
- case HL_TRANSPORT_SWIM:
- return STLINK_MODE_DEBUG_SWIM;
default:
return STLINK_MODE_UNKNOWN;
}
}
/** */
-static int stlink_usb_init_mode(void *handle, bool connect_under_reset)
+static int stlink_usb_exit_mode(void *handle)
{
int res;
uint8_t mode;
enum stlink_mode emode;
- struct stlink_usb_handle_s *h = handle;
- assert(handle != NULL);
+ assert(handle);
res = stlink_usb_current_mode(handle, &mode);
break;
}
- if (emode != STLINK_MODE_UNKNOWN) {
- res = stlink_usb_mode_leave(handle, emode);
+ if (emode != STLINK_MODE_UNKNOWN)
+ return stlink_usb_mode_leave(handle, emode);
- if (res != ERROR_OK)
- return res;
- }
+ return ERROR_OK;
+}
+
+/** */
+static int stlink_usb_init_mode(void *handle, bool connect_under_reset, int initial_interface_speed)
+{
+ int res;
+ uint8_t mode;
+ enum stlink_mode emode;
+ struct stlink_usb_handle_s *h = handle;
+
+ assert(handle);
+
+ res = stlink_usb_exit_mode(handle);
+ if (res != ERROR_OK)
+ return res;
res = stlink_usb_current_mode(handle, &mode);
LOG_DEBUG("MODE: 0x%02X", mode);
/* set selected mode */
- emode = stlink_get_mode(h->transport);
+ emode = h->st_mode;
if (emode == STLINK_MODE_UNKNOWN) {
LOG_ERROR("selected mode (transport) not supported");
return ERROR_FAIL;
}
+ /* set the speed before entering the mode, as the chip discovery phase should be done at this speed too */
+ if (emode == STLINK_MODE_DEBUG_JTAG) {
+ if (h->version.flags & STLINK_F_HAS_JTAG_SET_FREQ) {
+ stlink_dump_speed_map(stlink_khz_to_speed_map_jtag, ARRAY_SIZE(stlink_khz_to_speed_map_jtag));
+ stlink_speed(h, initial_interface_speed, false);
+ }
+ } else if (emode == STLINK_MODE_DEBUG_SWD) {
+ if (h->version.flags & STLINK_F_HAS_SWD_SET_FREQ) {
+ stlink_dump_speed_map(stlink_khz_to_speed_map_swd, ARRAY_SIZE(stlink_khz_to_speed_map_swd));
+ stlink_speed(h, initial_interface_speed, false);
+ }
+ }
+
+ if (h->version.jtag_api == STLINK_JTAG_API_V3 &&
+ (emode == STLINK_MODE_DEBUG_JTAG || emode == STLINK_MODE_DEBUG_SWD)) {
+ struct speed_map map[STLINK_V3_MAX_FREQ_NB];
+
+ stlink_get_com_freq(h, (emode == STLINK_MODE_DEBUG_JTAG), map);
+ stlink_dump_speed_map(map, ARRAY_SIZE(map));
+ stlink_speed(h, initial_interface_speed, false);
+ }
+
/* preliminary SRST assert:
* We want SRST is asserted before activating debug signals (mode_enter).
* As the required mode has not been set, the adapter may not know what pin to use.
stlink_usb_init_buffer(handle, h->rx_ep, 4);
h->cmdbuf[h->cmdidx++] = STLINK_SWIM_COMMAND;
h->cmdbuf[h->cmdidx++] = STLINK_SWIM_READSTATUS;
- res = stlink_usb_xfer(handle, h->databuf, 4);
+ /* error is checked by the caller */
+ res = stlink_usb_xfer_noerrcheck(handle, h->databuf, 4);
if (res != ERROR_OK)
return res;
return ERROR_OK;
}
/*
the purpose of this function is unknown...
- capabilites? anyway for swim v6 it returns
+ capabilities? anyway for swim v6 it returns
0001020600000000
*/
__attribute__((unused))
h->cmdbuf[h->cmdidx++] = STLINK_SWIM_COMMAND;
h->cmdbuf[h->cmdidx++] = STLINK_SWIM_READ_CAP;
h->cmdbuf[h->cmdidx++] = 0x01;
- res = stlink_usb_xfer(handle, h->databuf, 8);
+ res = stlink_usb_xfer_noerrcheck(handle, h->databuf, 8);
if (res != ERROR_OK)
return res;
memcpy(cap, h->databuf, 8);
}
/*
- send resyncronize sequence
+ send resynchronize sequence
swim is pulled low for 16us
reply is 64 clks low
*/
unsigned int datalen = 0;
int cmdsize = STLINK_CMD_SIZE_V2;
- if (len > STLINK_DATA_SIZE)
+ if (len > STLINK_SWIM_DATA_SIZE)
return ERROR_FAIL;
if (h->version.stlink == 1)
struct stlink_usb_handle_s *h = handle;
int res;
- if (len > STLINK_DATA_SIZE)
+ if (len > STLINK_SWIM_DATA_SIZE)
return ERROR_FAIL;
stlink_usb_init_buffer(handle, h->rx_ep, 0);
stlink_usb_init_buffer(handle, h->rx_ep, len);
h->cmdbuf[h->cmdidx++] = STLINK_SWIM_COMMAND;
h->cmdbuf[h->cmdidx++] = STLINK_SWIM_READBUF;
- res = stlink_usb_xfer(handle, data, len);
+ res = stlink_usb_xfer_noerrcheck(handle, data, len);
if (res != ERROR_OK)
return res;
/** */
static int stlink_usb_idcode(void *handle, uint32_t *idcode)
{
- int res;
+ int res, offset;
struct stlink_usb_handle_s *h = handle;
- assert(handle != NULL);
+ assert(handle);
/* there is no swim read core id cmd */
- if (h->transport == HL_TRANSPORT_SWIM) {
+ if (h->st_mode == STLINK_MODE_DEBUG_SWIM) {
*idcode = 0;
return ERROR_OK;
}
- stlink_usb_init_buffer(handle, h->rx_ep, 4);
+ stlink_usb_init_buffer(handle, h->rx_ep, 12);
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
- h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_READCOREID;
+ if (h->version.jtag_api == STLINK_JTAG_API_V1) {
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_READCOREID;
+
+ res = stlink_usb_xfer_noerrcheck(handle, h->databuf, 4);
+ offset = 0;
+ } else {
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_READ_IDCODES;
- res = stlink_usb_xfer(handle, h->databuf, 4);
+ res = stlink_usb_xfer_errcheck(handle, h->databuf, 12);
+ offset = 4;
+ }
if (res != ERROR_OK)
return res;
- *idcode = le_to_h_u32(h->databuf);
+ *idcode = le_to_h_u32(h->databuf + offset);
LOG_DEBUG("IDCODE: 0x%08" PRIX32, *idcode);
struct stlink_usb_handle_s *h = handle;
int res;
- assert(handle != NULL);
+ assert(handle);
stlink_usb_init_buffer(handle, h->rx_ep, 8);
{
struct stlink_usb_handle_s *h = handle;
- assert(handle != NULL);
+ assert(handle);
stlink_usb_init_buffer(handle, h->rx_ep, 2);
{
struct stlink_usb_handle_s *h = handle;
- assert(handle != NULL);
+ assert(handle);
if (h->trace.enabled && (h->version.flags & STLINK_F_HAS_TRACE)) {
int res;
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_GET_TRACE_NB;
- res = stlink_usb_xfer(handle, h->databuf, 2);
+ res = stlink_usb_xfer_noerrcheck(handle, h->databuf, 2);
if (res != ERROR_OK)
return res;
size_t bytes_avail = le_to_h_u16(h->databuf);
- *size = bytes_avail < *size ? bytes_avail : *size - 1;
+ *size = bytes_avail < *size ? bytes_avail : *size;
if (*size > 0) {
res = stlink_usb_read_trace(handle, buf, *size);
int res;
struct stlink_usb_handle_s *h = handle;
- assert(handle != NULL);
-
- if (h->transport == HL_TRANSPORT_SWIM) {
- res = stlink_usb_mode_enter(handle, stlink_get_mode(h->transport));
- if (res != ERROR_OK)
- return TARGET_UNKNOWN;
-
- res = stlink_swim_resync(handle);
- if (res != ERROR_OK)
- return TARGET_UNKNOWN;
-
- return ERROR_OK;
- }
+ assert(handle);
if (h->reconnect_pending) {
LOG_INFO("Previous state query failed, trying to reconnect");
- res = stlink_usb_mode_enter(handle, stlink_get_mode(h->transport));
-
+ res = stlink_usb_mode_enter(handle, h->st_mode);
if (res != ERROR_OK)
return TARGET_UNKNOWN;
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_GETSTATUS;
- res = stlink_usb_xfer(handle, h->databuf, 2);
+ res = stlink_usb_xfer_noerrcheck(handle, h->databuf, 2);
if (res != ERROR_OK)
return TARGET_UNKNOWN;
{
struct stlink_usb_handle_s *h = handle;
- assert(handle != NULL);
+ assert(handle);
- if (h->transport == HL_TRANSPORT_SWIM)
+ if (h->st_mode == STLINK_MODE_DEBUG_SWIM)
return stlink_swim_assert_reset(handle, srst);
if (h->version.stlink == 1)
int res = ERROR_OK;
struct stlink_usb_handle_s *h = handle;
- assert(handle != NULL);
+ assert(handle);
assert(h->version.flags & STLINK_F_HAS_TRACE);
stlink_usb_init_buffer(handle, h->rx_ep, 2);
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_STOP_TRACE_RX;
- res = stlink_usb_xfer(handle, h->databuf, 2);
+ res = stlink_usb_xfer_errcheck(handle, h->databuf, 2);
if (res == ERROR_OK)
h->trace.enabled = false;
int res;
struct stlink_usb_handle_s *h = handle;
- assert(handle != NULL);
+ assert(handle);
if (h->version.flags & STLINK_F_HAS_TRACE) {
stlink_usb_init_buffer(handle, h->rx_ep, 10);
h_u32_to_le(h->cmdbuf+h->cmdidx, h->trace.source_hz);
h->cmdidx += 4;
- res = stlink_usb_xfer(handle, h->databuf, 2);
+ res = stlink_usb_xfer_errcheck(handle, h->databuf, 2);
if (res == ERROR_OK) {
h->trace.enabled = true;
struct stlink_usb_handle_s *h = handle;
int retval;
- assert(handle != NULL);
-
- if (h->transport == HL_TRANSPORT_SWIM)
- return stlink_swim_generate_rst(handle);
+ assert(handle);
stlink_usb_init_buffer(handle, h->rx_ep, 2);
int res;
struct stlink_usb_handle_s *h = handle;
- assert(handle != NULL);
+ assert(handle);
if (h->version.jtag_api != STLINK_JTAG_API_V1) {
res = stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_DEBUGEN);
int res;
struct stlink_usb_handle_s *h = handle;
- assert(handle != NULL);
+ assert(handle);
if (h->version.jtag_api != STLINK_JTAG_API_V1) {
res = stlink_usb_write_debug_reg(handle, DCB_DHCSR, DBGKEY|C_HALT|C_DEBUGEN);
{
struct stlink_usb_handle_s *h = handle;
- assert(handle != NULL);
+ assert(handle);
if (h->version.jtag_api != STLINK_JTAG_API_V1) {
/* TODO: this emulates the v1 api, it should really use a similar auto mask isr
int res;
struct stlink_usb_handle_s *h = handle;
- assert(handle != NULL);
+ assert(handle);
- stlink_usb_init_buffer(handle, h->rx_ep, 84);
+ stlink_usb_init_buffer(handle, h->rx_ep, 88);
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
- if (h->version.jtag_api == STLINK_JTAG_API_V1)
+ if (h->version.jtag_api == STLINK_JTAG_API_V1) {
+
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV1_READALLREGS;
- else
+ res = stlink_usb_xfer_noerrcheck(handle, h->databuf, 84);
+ /* regs data from offset 0 */
+ } else {
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_READALLREGS;
+ res = stlink_usb_xfer_errcheck(handle, h->databuf, 88);
+ /* status at offset 0, regs data from offset 4 */
+ }
- res = stlink_usb_xfer(handle, h->databuf, 84);
-
- if (res != ERROR_OK)
- return res;
-
- return ERROR_OK;
+ return res;
}
/** */
-static int stlink_usb_read_reg(void *handle, int num, uint32_t *val)
+static int stlink_usb_read_reg(void *handle, unsigned int regsel, uint32_t *val)
{
int res;
struct stlink_usb_handle_s *h = handle;
- assert(handle != NULL);
+ assert(handle);
+
+ if (STLINK_REGSEL_IS_FPU(regsel) && !(h->version.flags & STLINK_F_HAS_FPU_REG)) {
+ res = stlink_usb_write_debug_reg(h, DCB_DCRSR, regsel & 0x7f);
+ if (res != ERROR_OK)
+ return res;
+
+ /* FIXME: poll DHCSR.S_REGRDY before read DCRDR */
+ return stlink_usb_v2_read_debug_reg(h, DCB_DCRDR, val);
+ }
stlink_usb_init_buffer(handle, h->rx_ep, h->version.jtag_api == STLINK_JTAG_API_V1 ? 4 : 8);
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV1_READREG;
else
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_READREG;
- h->cmdbuf[h->cmdidx++] = num;
+ h->cmdbuf[h->cmdidx++] = regsel;
if (h->version.jtag_api == STLINK_JTAG_API_V1) {
- res = stlink_usb_xfer(handle, h->databuf, 4);
+ res = stlink_usb_xfer_noerrcheck(handle, h->databuf, 4);
if (res != ERROR_OK)
return res;
*val = le_to_h_u32(h->databuf);
}
/** */
-static int stlink_usb_write_reg(void *handle, int num, uint32_t val)
+static int stlink_usb_write_reg(void *handle, unsigned int regsel, uint32_t val)
{
struct stlink_usb_handle_s *h = handle;
- assert(handle != NULL);
+ assert(handle);
+
+ if (STLINK_REGSEL_IS_FPU(regsel) && !(h->version.flags & STLINK_F_HAS_FPU_REG)) {
+ int res = stlink_usb_write_debug_reg(h, DCB_DCRDR, val);
+ if (res != ERROR_OK)
+ return res;
+
+ return stlink_usb_write_debug_reg(h, DCB_DCRSR, DCRSR_WNR | (regsel & 0x7f));
+ /* FIXME: poll DHCSR.S_REGRDY after write DCRSR */
+ }
stlink_usb_init_buffer(handle, h->rx_ep, 2);
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV1_WRITEREG;
else
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_WRITEREG;
- h->cmdbuf[h->cmdidx++] = num;
+ h->cmdbuf[h->cmdidx++] = regsel;
h_u32_to_le(h->cmdbuf+h->cmdidx, val);
h->cmdidx += 4;
static int stlink_usb_get_rw_status(void *handle)
{
- int res;
struct stlink_usb_handle_s *h = handle;
- assert(handle != NULL);
+ assert(handle);
if (h->version.jtag_api == STLINK_JTAG_API_V1)
return ERROR_OK;
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
if (h->version.flags & STLINK_F_HAS_GETLASTRWSTATUS2) {
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_GETLASTRWSTATUS2;
-
- res = stlink_usb_xfer(handle, h->databuf, 12);
+ return stlink_usb_xfer_errcheck(handle, h->databuf, 12);
} else {
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_GETLASTRWSTATUS;
-
- res = stlink_usb_xfer(handle, h->databuf, 2);
+ return stlink_usb_xfer_errcheck(handle, h->databuf, 2);
}
-
- if (res != ERROR_OK)
- return res;
-
- return stlink_usb_error_check(h);
}
/** */
-static int stlink_usb_read_mem8(void *handle, uint32_t addr, uint16_t len,
- uint8_t *buffer)
+static int stlink_usb_read_mem8(void *handle, uint8_t ap_num, uint32_t csw,
+ uint32_t addr, uint16_t len, uint8_t *buffer)
{
int res;
uint16_t read_len = len;
struct stlink_usb_handle_s *h = handle;
- assert(handle != NULL);
+ assert(handle);
+
+ if ((ap_num != 0 || csw != 0) && !(h->version.flags & STLINK_F_HAS_CSW))
+ return ERROR_COMMAND_NOTFOUND;
/* max 8 bit read/write is 64 bytes or 512 bytes for v3 */
if (len > stlink_usb_block(h)) {
h->cmdidx += 4;
h_u16_to_le(h->cmdbuf+h->cmdidx, len);
h->cmdidx += 2;
+ h->cmdbuf[h->cmdidx++] = ap_num;
+ h_u24_to_le(h->cmdbuf + h->cmdidx, csw >> 8);
+ h->cmdidx += 3;
/* we need to fix read length for single bytes */
if (read_len == 1)
read_len++;
- res = stlink_usb_xfer(handle, h->databuf, read_len);
+ res = stlink_usb_xfer_noerrcheck(handle, h->databuf, read_len);
if (res != ERROR_OK)
return res;
}
/** */
-static int stlink_usb_write_mem8(void *handle, uint32_t addr, uint16_t len,
- const uint8_t *buffer)
+static int stlink_usb_write_mem8(void *handle, uint8_t ap_num, uint32_t csw,
+ uint32_t addr, uint16_t len, const uint8_t *buffer)
{
int res;
struct stlink_usb_handle_s *h = handle;
- assert(handle != NULL);
+ assert(handle);
+
+ if ((ap_num != 0 || csw != 0) && !(h->version.flags & STLINK_F_HAS_CSW))
+ return ERROR_COMMAND_NOTFOUND;
/* max 8 bit read/write is 64 bytes or 512 bytes for v3 */
if (len > stlink_usb_block(h)) {
h->cmdidx += 4;
h_u16_to_le(h->cmdbuf+h->cmdidx, len);
h->cmdidx += 2;
+ h->cmdbuf[h->cmdidx++] = ap_num;
+ h_u24_to_le(h->cmdbuf + h->cmdidx, csw >> 8);
+ h->cmdidx += 3;
- res = stlink_usb_xfer(handle, buffer, len);
+ res = stlink_usb_xfer_noerrcheck(handle, buffer, len);
if (res != ERROR_OK)
return res;
}
/** */
-static int stlink_usb_read_mem16(void *handle, uint32_t addr, uint16_t len,
- uint8_t *buffer)
+static int stlink_usb_read_mem16(void *handle, uint8_t ap_num, uint32_t csw,
+ uint32_t addr, uint16_t len, uint8_t *buffer)
{
int res;
struct stlink_usb_handle_s *h = handle;
- assert(handle != NULL);
+ assert(handle);
if (!(h->version.flags & STLINK_F_HAS_MEM_16BIT))
return ERROR_COMMAND_NOTFOUND;
+ if ((ap_num != 0 || csw != 0) && !(h->version.flags & STLINK_F_HAS_CSW))
+ return ERROR_COMMAND_NOTFOUND;
+
+ if (len > STLINK_MAX_RW16_32) {
+ LOG_DEBUG("max buffer (%d) length exceeded", STLINK_MAX_RW16_32);
+ return ERROR_FAIL;
+ }
+
/* data must be a multiple of 2 and half-word aligned */
if (len % 2 || addr % 2) {
LOG_DEBUG("Invalid data alignment");
h->cmdidx += 4;
h_u16_to_le(h->cmdbuf+h->cmdidx, len);
h->cmdidx += 2;
+ h->cmdbuf[h->cmdidx++] = ap_num;
+ h_u24_to_le(h->cmdbuf + h->cmdidx, csw >> 8);
+ h->cmdidx += 3;
- res = stlink_usb_xfer(handle, h->databuf, len);
+ res = stlink_usb_xfer_noerrcheck(handle, h->databuf, len);
if (res != ERROR_OK)
return res;
}
/** */
-static int stlink_usb_write_mem16(void *handle, uint32_t addr, uint16_t len,
- const uint8_t *buffer)
+static int stlink_usb_write_mem16(void *handle, uint8_t ap_num, uint32_t csw,
+ uint32_t addr, uint16_t len, const uint8_t *buffer)
{
int res;
struct stlink_usb_handle_s *h = handle;
- assert(handle != NULL);
+ assert(handle);
if (!(h->version.flags & STLINK_F_HAS_MEM_16BIT))
return ERROR_COMMAND_NOTFOUND;
+ if ((ap_num != 0 || csw != 0) && !(h->version.flags & STLINK_F_HAS_CSW))
+ return ERROR_COMMAND_NOTFOUND;
+
+ if (len > STLINK_MAX_RW16_32) {
+ LOG_DEBUG("max buffer (%d) length exceeded", STLINK_MAX_RW16_32);
+ return ERROR_FAIL;
+ }
+
/* data must be a multiple of 2 and half-word aligned */
if (len % 2 || addr % 2) {
LOG_DEBUG("Invalid data alignment");
h->cmdidx += 4;
h_u16_to_le(h->cmdbuf+h->cmdidx, len);
h->cmdidx += 2;
+ h->cmdbuf[h->cmdidx++] = ap_num;
+ h_u24_to_le(h->cmdbuf + h->cmdidx, csw >> 8);
+ h->cmdidx += 3;
- res = stlink_usb_xfer(handle, buffer, len);
+ res = stlink_usb_xfer_noerrcheck(handle, buffer, len);
if (res != ERROR_OK)
return res;
}
/** */
-static int stlink_usb_read_mem32(void *handle, uint32_t addr, uint16_t len,
- uint8_t *buffer)
+static int stlink_usb_read_mem32(void *handle, uint8_t ap_num, uint32_t csw,
+ uint32_t addr, uint16_t len, uint8_t *buffer)
{
int res;
struct stlink_usb_handle_s *h = handle;
- assert(handle != NULL);
+ assert(handle);
+
+ if ((ap_num != 0 || csw != 0) && !(h->version.flags & STLINK_F_HAS_CSW))
+ return ERROR_COMMAND_NOTFOUND;
+
+ if (len > STLINK_MAX_RW16_32) {
+ LOG_DEBUG("max buffer (%d) length exceeded", STLINK_MAX_RW16_32);
+ return ERROR_FAIL;
+ }
/* data must be a multiple of 4 and word aligned */
if (len % 4 || addr % 4) {
h->cmdidx += 4;
h_u16_to_le(h->cmdbuf+h->cmdidx, len);
h->cmdidx += 2;
+ h->cmdbuf[h->cmdidx++] = ap_num;
+ h_u24_to_le(h->cmdbuf + h->cmdidx, csw >> 8);
+ h->cmdidx += 3;
- res = stlink_usb_xfer(handle, h->databuf, len);
+ res = stlink_usb_xfer_noerrcheck(handle, h->databuf, len);
if (res != ERROR_OK)
return res;
}
/** */
-static int stlink_usb_write_mem32(void *handle, uint32_t addr, uint16_t len,
- const uint8_t *buffer)
+static int stlink_usb_write_mem32(void *handle, uint8_t ap_num, uint32_t csw,
+ uint32_t addr, uint16_t len, const uint8_t *buffer)
{
int res;
struct stlink_usb_handle_s *h = handle;
- assert(handle != NULL);
+ assert(handle);
+
+ if ((ap_num != 0 || csw != 0) && !(h->version.flags & STLINK_F_HAS_CSW))
+ return ERROR_COMMAND_NOTFOUND;
+
+ if (len > STLINK_MAX_RW16_32) {
+ LOG_DEBUG("max buffer (%d) length exceeded", STLINK_MAX_RW16_32);
+ return ERROR_FAIL;
+ }
/* data must be a multiple of 4 and word aligned */
if (len % 4 || addr % 4) {
h->cmdidx += 4;
h_u16_to_le(h->cmdbuf+h->cmdidx, len);
h->cmdidx += 2;
+ h->cmdbuf[h->cmdidx++] = ap_num;
+ h_u24_to_le(h->cmdbuf + h->cmdidx, csw >> 8);
+ h->cmdidx += 3;
- res = stlink_usb_xfer(handle, buffer, len);
+ res = stlink_usb_xfer_noerrcheck(handle, buffer, len);
if (res != ERROR_OK)
return res;
return stlink_usb_get_rw_status(handle);
}
+static int stlink_usb_read_mem32_noaddrinc(void *handle, uint8_t ap_num, uint32_t csw,
+ uint32_t addr, uint16_t len, uint8_t *buffer)
+{
+ struct stlink_usb_handle_s *h = handle;
+
+ assert(handle != NULL);
+
+ if (!(h->version.flags & STLINK_F_HAS_MEM_RD_NO_INC))
+ return ERROR_COMMAND_NOTFOUND;
+
+ if (len > STLINK_MAX_RW16_32) {
+ LOG_DEBUG("max buffer (%d) length exceeded", STLINK_MAX_RW16_32);
+ return ERROR_FAIL;
+ }
+
+ /* data must be a multiple of 4 and word aligned */
+ if (len % 4 || addr % 4) {
+ LOG_DEBUG("Invalid data alignment");
+ return ERROR_TARGET_UNALIGNED_ACCESS;
+ }
+
+ stlink_usb_init_buffer(handle, h->rx_ep, len);
+
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_READMEM_32BIT_NO_ADDR_INC;
+ h_u32_to_le(h->cmdbuf + h->cmdidx, addr);
+ h->cmdidx += 4;
+ h_u16_to_le(h->cmdbuf + h->cmdidx, len);
+ h->cmdidx += 2;
+ h->cmdbuf[h->cmdidx++] = ap_num;
+ h_u24_to_le(h->cmdbuf + h->cmdidx, csw >> 8);
+ h->cmdidx += 3;
+
+ int retval = stlink_usb_xfer_noerrcheck(handle, h->databuf, len);
+ if (retval != ERROR_OK)
+ return retval;
+
+ memcpy(buffer, h->databuf, len);
+
+ return stlink_usb_get_rw_status(handle);
+}
+
+static int stlink_usb_write_mem32_noaddrinc(void *handle, uint8_t ap_num, uint32_t csw,
+ uint32_t addr, uint16_t len, const uint8_t *buffer)
+{
+ struct stlink_usb_handle_s *h = handle;
+
+ assert(handle != NULL);
+
+ if (!(h->version.flags & STLINK_F_HAS_MEM_WR_NO_INC))
+ return ERROR_COMMAND_NOTFOUND;
+
+ if (len > STLINK_MAX_RW16_32) {
+ LOG_DEBUG("max buffer (%d) length exceeded", STLINK_MAX_RW16_32);
+ return ERROR_FAIL;
+ }
+
+ /* data must be a multiple of 4 and word aligned */
+ if (len % 4 || addr % 4) {
+ LOG_DEBUG("Invalid data alignment");
+ return ERROR_TARGET_UNALIGNED_ACCESS;
+ }
+
+ stlink_usb_init_buffer(handle, h->tx_ep, len);
+
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_WRITEMEM_32BIT_NO_ADDR_INC;
+ h_u32_to_le(h->cmdbuf + h->cmdidx, addr);
+ h->cmdidx += 4;
+ h_u16_to_le(h->cmdbuf + h->cmdidx, len);
+ h->cmdidx += 2;
+ h->cmdbuf[h->cmdidx++] = ap_num;
+ h_u24_to_le(h->cmdbuf + h->cmdidx, csw >> 8);
+ h->cmdidx += 3;
+
+ int retval = stlink_usb_xfer_noerrcheck(handle, buffer, len);
+ if (retval != ERROR_OK)
+ return retval;
+
+ return stlink_usb_get_rw_status(handle);
+}
+
static uint32_t stlink_max_block_size(uint32_t tar_autoincr_block, uint32_t address)
{
uint32_t max_tar_block = (tar_autoincr_block - ((tar_autoincr_block - 1) & address));
return max_tar_block;
}
-static int stlink_usb_read_mem(void *handle, uint32_t addr, uint32_t size,
- uint32_t count, uint8_t *buffer)
+static int stlink_usb_read_ap_mem(void *handle, uint8_t ap_num, uint32_t csw,
+ uint32_t addr, uint32_t size, uint32_t count, uint8_t *buffer)
{
int retval = ERROR_OK;
uint32_t bytes_remaining;
size = 1;
while (count) {
-
- bytes_remaining = (size != 1) ? \
+ bytes_remaining = (size != 1) ?
stlink_max_block_size(h->max_mem_packet, addr) : stlink_usb_block(h);
if (count < bytes_remaining)
bytes_remaining = count;
- if (h->transport == HL_TRANSPORT_SWIM) {
- retval = stlink_swim_readbytes(handle, addr, bytes_remaining, buffer);
- if (retval != ERROR_OK)
- return retval;
- } else
/*
* all stlink support 8/32bit memory read/writes and only from
* stlink V2J26 there is support for 16 bit memory read/write.
* as 8bit access.
*/
if (size != 1) {
-
/* When in jtag mode the stlink uses the auto-increment functionality.
* However it expects us to pass the data correctly, this includes
* alignment and any page boundaries. We already do this as part of the
/* we first need to check for any unaligned bytes */
if (addr & (size - 1)) {
-
uint32_t head_bytes = size - (addr & (size - 1));
- retval = stlink_usb_read_mem8(handle, addr, head_bytes, buffer);
+ retval = stlink_usb_read_mem8(handle, ap_num, csw, addr, head_bytes, buffer);
if (retval == ERROR_WAIT && retries < MAX_WAIT_RETRIES) {
- usleep((1<<retries++) * 1000);
+ usleep((1 << retries++) * 1000);
continue;
}
if (retval != ERROR_OK)
}
if (bytes_remaining & (size - 1))
- retval = stlink_usb_read_mem(handle, addr, 1, bytes_remaining, buffer);
+ retval = stlink_usb_read_ap_mem(handle, ap_num, csw, addr, 1, bytes_remaining, buffer);
else if (size == 2)
- retval = stlink_usb_read_mem16(handle, addr, bytes_remaining, buffer);
+ retval = stlink_usb_read_mem16(handle, ap_num, csw, addr, bytes_remaining, buffer);
else
- retval = stlink_usb_read_mem32(handle, addr, bytes_remaining, buffer);
- } else
- retval = stlink_usb_read_mem8(handle, addr, bytes_remaining, buffer);
+ retval = stlink_usb_read_mem32(handle, ap_num, csw, addr, bytes_remaining, buffer);
+ } else {
+ retval = stlink_usb_read_mem8(handle, ap_num, csw, addr, bytes_remaining, buffer);
+ }
if (retval == ERROR_WAIT && retries < MAX_WAIT_RETRIES) {
- usleep((1<<retries++) * 1000);
+ usleep((1 << retries++) * 1000);
continue;
}
if (retval != ERROR_OK)
return retval;
}
-static int stlink_usb_write_mem(void *handle, uint32_t addr, uint32_t size,
- uint32_t count, const uint8_t *buffer)
+static int stlink_usb_read_mem(void *handle, uint32_t addr, uint32_t size,
+ uint32_t count, uint8_t *buffer)
+{
+ return stlink_usb_read_ap_mem(handle, STLINK_HLA_AP_NUM, STLINK_HLA_CSW,
+ addr, size, count, buffer);
+}
+
+static int stlink_usb_write_ap_mem(void *handle, uint8_t ap_num, uint32_t csw,
+ uint32_t addr, uint32_t size, uint32_t count, const uint8_t *buffer)
{
int retval = ERROR_OK;
uint32_t bytes_remaining;
while (count) {
- bytes_remaining = (size != 1) ? \
+ bytes_remaining = (size != 1) ?
stlink_max_block_size(h->max_mem_packet, addr) : stlink_usb_block(h);
if (count < bytes_remaining)
bytes_remaining = count;
- if (h->transport == HL_TRANSPORT_SWIM) {
- retval = stlink_swim_writebytes(handle, addr, bytes_remaining, buffer);
- if (retval != ERROR_OK)
- return retval;
- } else
/*
* all stlink support 8/32bit memory read/writes and only from
* stlink V2J26 there is support for 16 bit memory read/write.
if (addr & (size - 1)) {
uint32_t head_bytes = size - (addr & (size - 1));
- retval = stlink_usb_write_mem8(handle, addr, head_bytes, buffer);
+ retval = stlink_usb_write_mem8(handle, ap_num, csw, addr, head_bytes, buffer);
if (retval == ERROR_WAIT && retries < MAX_WAIT_RETRIES) {
usleep((1<<retries++) * 1000);
continue;
}
if (bytes_remaining & (size - 1))
- retval = stlink_usb_write_mem(handle, addr, 1, bytes_remaining, buffer);
+ retval = stlink_usb_write_ap_mem(handle, ap_num, csw, addr, 1, bytes_remaining, buffer);
else if (size == 2)
- retval = stlink_usb_write_mem16(handle, addr, bytes_remaining, buffer);
+ retval = stlink_usb_write_mem16(handle, ap_num, csw, addr, bytes_remaining, buffer);
else
- retval = stlink_usb_write_mem32(handle, addr, bytes_remaining, buffer);
+ retval = stlink_usb_write_mem32(handle, ap_num, csw, addr, bytes_remaining, buffer);
} else
- retval = stlink_usb_write_mem8(handle, addr, bytes_remaining, buffer);
+ retval = stlink_usb_write_mem8(handle, ap_num, csw, addr, bytes_remaining, buffer);
if (retval == ERROR_WAIT && retries < MAX_WAIT_RETRIES) {
usleep((1<<retries++) * 1000);
continue;
return retval;
}
+static int stlink_usb_write_mem(void *handle, uint32_t addr, uint32_t size,
+ uint32_t count, const uint8_t *buffer)
+{
+ return stlink_usb_write_ap_mem(handle, STLINK_HLA_AP_NUM, STLINK_HLA_CSW,
+ addr, size, count, buffer);
+}
+
/** */
static int stlink_usb_override_target(const char *targetname)
{
static int stlink_speed_swim(void *handle, int khz, bool query)
{
+ int retval;
+
/*
- we dont care what the khz rate is
we only have low and high speed...
before changing speed the SWIM_CSR HS bit
must be updated
*/
- if (khz == 0)
- stlink_swim_speed(handle, 0);
- else
- stlink_swim_speed(handle, 1);
- return khz;
+ if (!query) {
+ retval = stlink_swim_speed(handle, (khz < SWIM_FREQ_HIGH) ? 0 : 1);
+ if (retval != ERROR_OK)
+ LOG_ERROR("Unable to set adapter speed");
+ }
+
+ return (khz < SWIM_FREQ_HIGH) ? SWIM_FREQ_LOW : SWIM_FREQ_HIGH;
}
static int stlink_match_speed_map(const struct speed_map *map, unsigned int map_size, int khz, bool query)
match = false;
if (!match && query) {
- LOG_INFO("Unable to match requested speed %d kHz, using %d kHz", \
+ LOG_INFO("Unable to match requested speed %d kHz, using %d kHz",
khz, map[speed_index].speed);
}
return stlink_khz_to_speed_map_jtag[speed_index].speed;
}
-void stlink_dump_speed_map(const struct speed_map *map, unsigned int map_size)
+static void stlink_dump_speed_map(const struct speed_map *map, unsigned int map_size)
{
unsigned int i;
h->cmdbuf[h->cmdidx++] = STLINK_APIV3_GET_COM_FREQ;
h->cmdbuf[h->cmdidx++] = is_jtag ? 1 : 0;
- int res = stlink_usb_xfer(handle, h->databuf, 52);
+ int res = stlink_usb_xfer_errcheck(handle, h->databuf, 52);
int size = h->databuf[8];
h_u32_to_le(&h->cmdbuf[4], frequency);
- return stlink_usb_xfer(handle, h->databuf, 8);
+ return stlink_usb_xfer_errcheck(handle, h->databuf, 8);
}
static int stlink_speed_v3(void *handle, bool is_jtag, int khz, bool query)
if (!handle)
return khz;
- switch (h->transport) {
- case HL_TRANSPORT_SWIM:
+ switch (h->st_mode) {
+ case STLINK_MODE_DEBUG_SWIM:
return stlink_speed_swim(handle, khz, query);
- break;
- case HL_TRANSPORT_SWD:
+ case STLINK_MODE_DEBUG_SWD:
if (h->version.jtag_api == STLINK_JTAG_API_V3)
return stlink_speed_v3(handle, false, khz, query);
else
return stlink_speed_swd(handle, khz, query);
break;
- case HL_TRANSPORT_JTAG:
+ case STLINK_MODE_DEBUG_JTAG:
if (h->version.jtag_api == STLINK_JTAG_API_V3)
return stlink_speed_v3(handle, true, khz, query);
else
}
/** */
-static int stlink_usb_close(void *handle)
+static int stlink_usb_usb_close(void *handle)
{
- int res;
- uint8_t mode;
- enum stlink_mode emode;
struct stlink_usb_handle_s *h = handle;
- if (h && h->fd)
- res = stlink_usb_current_mode(handle, &mode);
- else
- res = ERROR_FAIL;
- /* do not exit if return code != ERROR_OK,
- it prevents us from closing jtag_libusb */
-
- if (res == ERROR_OK) {
- /* try to exit current mode */
- switch (mode) {
- case STLINK_DEV_DFU_MODE:
- emode = STLINK_MODE_DFU;
- break;
- case STLINK_DEV_DEBUG_MODE:
- emode = STLINK_MODE_DEBUG_SWD;
- break;
- case STLINK_DEV_SWIM_MODE:
- emode = STLINK_MODE_DEBUG_SWIM;
- break;
- case STLINK_DEV_BOOTLOADER_MODE:
- case STLINK_DEV_MASS_MODE:
- default:
- emode = STLINK_MODE_UNKNOWN;
- break;
- }
+ if (!h)
+ return ERROR_OK;
- if (emode != STLINK_MODE_UNKNOWN)
- stlink_usb_mode_leave(handle, emode);
- /* do not check return code, it prevent
- us from closing jtag_libusb */
+ if (h->usb_backend_priv.fd) {
+ stlink_usb_exit_mode(h);
+ /* do not check return code, it prevent
+ us from closing jtag_libusb */
+ jtag_libusb_close(h->usb_backend_priv.fd);
}
- if (h && h->fd)
- jtag_libusb_close(h->fd);
-
- free(h);
+ free(h->cmdbuf);
+ free(h->databuf);
return ERROR_OK;
}
/** */
-static int stlink_usb_open(struct hl_interface_param_s *param, void **fd)
+static int stlink_tcp_close(void *handle)
{
- int err, retry_count = 1;
- struct stlink_usb_handle_s *h;
+ struct stlink_usb_handle_s *h = handle;
- LOG_DEBUG("stlink_usb_open");
+ if (!h)
+ return ERROR_OK;
- h = calloc(1, sizeof(struct stlink_usb_handle_s));
+ int ret = ERROR_OK;
+ if (h->tcp_backend_priv.connected) {
+ if (h->tcp_backend_priv.connect_id) {
+ stlink_usb_exit_mode(h);
+
+ /* close the stlink */
+ h->tcp_backend_priv.send_buf[0] = STLINK_TCP_CMD_CLOSE_DEV;
+ memset(&h->tcp_backend_priv.send_buf[1], 0, 4); /* reserved */
+ h_u32_to_le(&h->tcp_backend_priv.send_buf[4], h->tcp_backend_priv.connect_id);
+ ret = stlink_tcp_send_cmd(h, 8, 4, true);
+ if (ret != ERROR_OK)
+ LOG_ERROR("cannot close the STLINK");
+ }
- if (h == 0) {
- LOG_DEBUG("malloc failed");
- return ERROR_FAIL;
+ if (close_socket(h->tcp_backend_priv.fd) != 0)
+ LOG_ERROR("error closing the socket, errno: %s", strerror(errno));
}
- h->transport = param->transport;
+ free(h->tcp_backend_priv.send_buf);
+ free(h->tcp_backend_priv.recv_buf);
- for (unsigned i = 0; param->vid[i]; i++) {
- LOG_DEBUG("transport: %d vid: 0x%04x pid: 0x%04x serial: %s",
- param->transport, param->vid[i], param->pid[i],
- param->serial ? param->serial : "");
+ return ret;
+}
+
+/** */
+static int stlink_close(void *handle)
+{
+ if (handle) {
+ struct stlink_usb_handle_s *h = handle;
+
+ stlink_usb_close(handle);
+
+ free(h);
+ }
+
+ return ERROR_OK;
+}
+
+/* Compute ST-Link serial number from the device descriptor
+ * this function will help to work-around a bug in old ST-Link/V2 DFU
+ * the buggy DFU returns an incorrect serial in the USB descriptor
+ * example for the following serial "57FF72067265575742132067"
+ * - the correct descriptor serial is:
+ * 0x32, 0x03, 0x35, 0x00, 0x37, 0x00, 0x46, 0x00, 0x46, 0x00, 0x37, 0x00, 0x32, 0x00 ...
+ * this contains the length (0x32 = 50), the type (0x3 = DT_STRING) and the serial in unicode format
+ * the serial part is: 0x0035, 0x0037, 0x0046, 0x0046, 0x0037, 0x0032 ... >> 57FF72 ...
+ * this format could be read correctly by 'libusb_get_string_descriptor_ascii'
+ * so this case is managed by libusb_helper::string_descriptor_equal
+ * - the buggy DFU is not doing any unicode conversion and returns a raw serial data in the descriptor
+ * 0x1a, 0x03, 0x57, 0x00, 0xFF, 0x00, 0x72, 0x00 ...
+ * >> 57 FF 72 ...
+ * based on the length (0x1a = 26) we could easily decide if we have to fixup the serial
+ * and then we have just to convert the raw data into printable characters using sprintf
+ */
+static char *stlink_usb_get_alternate_serial(struct libusb_device_handle *device,
+ struct libusb_device_descriptor *dev_desc)
+{
+ int usb_retval;
+ unsigned char desc_serial[(STLINK_SERIAL_LEN + 1) * 2];
+
+ if (dev_desc->iSerialNumber == 0)
+ return NULL;
+
+ /* get the LANGID from String Descriptor Zero */
+ usb_retval = libusb_get_string_descriptor(device, 0, 0, desc_serial,
+ sizeof(desc_serial));
+
+ if (usb_retval < LIBUSB_SUCCESS) {
+ LOG_ERROR("libusb_get_string_descriptor() failed: %s(%d)",
+ libusb_error_name(usb_retval), usb_retval);
+ return NULL;
+ } else if (usb_retval < 4) {
+ /* the size should be least 4 bytes to contain a minimum of 1 supported LANGID */
+ LOG_ERROR("could not get the LANGID");
+ return NULL;
+ }
+
+ uint32_t langid = desc_serial[2] | (desc_serial[3] << 8);
+
+ /* get the serial */
+ usb_retval = libusb_get_string_descriptor(device, dev_desc->iSerialNumber,
+ langid, desc_serial, sizeof(desc_serial));
+
+ unsigned char len = desc_serial[0];
+
+ if (usb_retval < LIBUSB_SUCCESS) {
+ LOG_ERROR("libusb_get_string_descriptor() failed: %s(%d)",
+ libusb_error_name(usb_retval), usb_retval);
+ return NULL;
+ } else if (desc_serial[1] != LIBUSB_DT_STRING || len > usb_retval) {
+ LOG_ERROR("invalid string in ST-LINK USB serial descriptor");
+ return NULL;
+ }
+
+ if (len == ((STLINK_SERIAL_LEN + 1) * 2)) {
+ /* good ST-Link adapter, this case is managed by
+ * libusb::libusb_get_string_descriptor_ascii */
+ return NULL;
+ } else if (len != ((STLINK_SERIAL_LEN / 2 + 1) * 2)) {
+ LOG_ERROR("unexpected serial length (%d) in descriptor", len);
+ return NULL;
}
+ /* else (len == 26) => buggy ST-Link */
+
+ char *alternate_serial = malloc((STLINK_SERIAL_LEN + 1) * sizeof(char));
+ if (!alternate_serial)
+ return NULL;
+
+ for (unsigned int i = 0; i < STLINK_SERIAL_LEN; i += 2)
+ sprintf(alternate_serial + i, "%02X", desc_serial[i + 2]);
+
+ alternate_serial[STLINK_SERIAL_LEN] = '\0';
+
+ return alternate_serial;
+}
+
+/** */
+static int stlink_usb_usb_open(void *handle, struct hl_interface_param_s *param)
+{
+ struct stlink_usb_handle_s *h = handle;
+ int err, retry_count = 1;
+
+ h->cmdbuf = malloc(STLINK_SG_SIZE);
+ h->databuf = malloc(STLINK_DATA_SIZE);
+
+ if (!h->cmdbuf || !h->databuf)
+ return ERROR_FAIL;
+
/*
On certain host USB configurations(e.g. MacBook Air)
STLINKv2 dongle seems to have its FW in a funky state if,
in order to become operational.
*/
do {
- if (jtag_libusb_open(param->vid, param->pid, param->serial, &h->fd) != ERROR_OK) {
+ if (jtag_libusb_open(param->vid, param->pid,
+ &h->usb_backend_priv.fd, stlink_usb_get_alternate_serial) != ERROR_OK) {
LOG_ERROR("open failed");
- goto error_open;
+ return ERROR_FAIL;
}
- jtag_libusb_set_configuration(h->fd, 0);
+ jtag_libusb_set_configuration(h->usb_backend_priv.fd, 0);
- if (jtag_libusb_claim_interface(h->fd, 0) != ERROR_OK) {
+ if (libusb_claim_interface(h->usb_backend_priv.fd, 0) != ERROR_OK) {
LOG_DEBUG("claim interface failed");
- goto error_open;
+ return ERROR_FAIL;
}
/* RX EP is common for all versions */
h->rx_ep = STLINK_RX_EP;
uint16_t pid;
- if (jtag_libusb_get_pid(jtag_libusb_get_device(h->fd), &pid) != ERROR_OK) {
+ if (jtag_libusb_get_pid(libusb_get_device(h->usb_backend_priv.fd), &pid) != ERROR_OK) {
LOG_DEBUG("libusb_get_pid failed");
- goto error_open;
+ return ERROR_FAIL;
}
/* wrap version for first read */
case STLINK_V3E_PID:
case STLINK_V3S_PID:
case STLINK_V3_2VCP_PID:
+ case STLINK_V3E_NO_MSD_PID:
h->version.stlink = 3;
h->tx_ep = STLINK_V2_1_TX_EP;
h->trace_ep = STLINK_V2_1_TRACE_EP;
} else if (h->version.stlink == 1 ||
retry_count == 0) {
LOG_ERROR("read version failed");
- goto error_open;
+ return ERROR_FAIL;
} else {
- err = jtag_libusb_release_interface(h->fd, 0);
+ err = libusb_release_interface(h->usb_backend_priv.fd, 0);
if (err != ERROR_OK) {
LOG_ERROR("release interface failed");
- goto error_open;
+ return ERROR_FAIL;
}
- err = jtag_libusb_reset_device(h->fd);
+ err = libusb_reset_device(h->usb_backend_priv.fd);
if (err != ERROR_OK) {
LOG_ERROR("reset device failed");
- goto error_open;
+ return ERROR_FAIL;
}
- jtag_libusb_close(h->fd);
+ jtag_libusb_close(h->usb_backend_priv.fd);
/*
Give the device one second to settle down and
reenumerate.
}
} while (1);
- /* check if mode is supported */
- err = ERROR_OK;
+ return ERROR_OK;
+}
- switch (h->transport) {
- case HL_TRANSPORT_SWD:
- if (h->version.jtag_api == STLINK_JTAG_API_V1)
- err = ERROR_FAIL;
- /* fall-through */
- case HL_TRANSPORT_JTAG:
- if (h->version.jtag == 0)
- err = ERROR_FAIL;
- break;
- case HL_TRANSPORT_SWIM:
- if (h->version.swim == 0)
- err = ERROR_FAIL;
- break;
- default:
- err = ERROR_FAIL;
- break;
- }
+/** */
+static int stlink_tcp_open(void *handle, struct hl_interface_param_s *param)
+{
+ struct stlink_usb_handle_s *h = handle;
+ int ret;
- if (err != ERROR_OK) {
- LOG_ERROR("mode (transport) not supported by device");
- goto error_open;
+ /* SWIM is not supported using stlink-server */
+ if (h->st_mode == STLINK_MODE_DEBUG_SWIM) {
+ LOG_ERROR("stlink-server does not support SWIM mode");
+ return ERROR_FAIL;
}
- /* initialize the debug hardware */
- err = stlink_usb_init_mode(h, param->connect_under_reset);
+ h->tcp_backend_priv.send_buf = malloc(STLINK_TCP_SEND_BUFFER_SIZE);
+ h->tcp_backend_priv.recv_buf = malloc(STLINK_TCP_RECV_BUFFER_SIZE);
- if (err != ERROR_OK) {
- LOG_ERROR("init mode failed (unable to connect to the target)");
- goto error_open;
- }
+ if (!h->tcp_backend_priv.send_buf || !h->tcp_backend_priv.recv_buf)
+ return ERROR_FAIL;
- if (h->transport == HL_TRANSPORT_SWIM) {
- err = stlink_swim_enter(h);
- if (err != ERROR_OK) {
- LOG_ERROR("stlink_swim_enter_failed (unable to connect to the target)");
- goto error_open;
- }
- *fd = h;
- h->max_mem_packet = STLINK_DATA_SIZE;
- return ERROR_OK;
+ h->cmdbuf = &h->tcp_backend_priv.send_buf[8];
+ h->databuf = &h->tcp_backend_priv.recv_buf[4];
+
+ /* configure directions */
+ h->rx_ep = STLINK_TCP_REQUEST_READ;
+ h->tx_ep = STLINK_TCP_REQUEST_WRITE;
+ h->trace_ep = STLINK_TCP_REQUEST_READ_SWO;
+
+ h->tcp_backend_priv.fd = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP);
+ h->tcp_backend_priv.connected = false;
+ h->tcp_backend_priv.device_id = 0;
+ h->tcp_backend_priv.connect_id = 0;
+
+ if (h->tcp_backend_priv.fd == -1) {
+ LOG_ERROR("error creating the socket, errno: %s", strerror(errno));
+ return ERROR_FAIL;
}
- if (h->transport == HL_TRANSPORT_JTAG) {
- if (h->version.flags & STLINK_F_HAS_JTAG_SET_FREQ) {
- stlink_dump_speed_map(stlink_khz_to_speed_map_jtag, ARRAY_SIZE(stlink_khz_to_speed_map_jtag));
- stlink_speed(h, param->initial_interface_speed, false);
+ struct sockaddr_in serv;
+ memset(&serv, 0, sizeof(struct sockaddr_in));
+ serv.sin_family = AF_INET;
+ serv.sin_port = htons(param->stlink_tcp_port);
+ serv.sin_addr.s_addr = inet_addr("127.0.0.1");
+
+ LOG_DEBUG("socket : %x", h->tcp_backend_priv.fd);
+
+ int optval = 1;
+ if (setsockopt(h->tcp_backend_priv.fd, IPPROTO_TCP, TCP_NODELAY, (const void *)&optval, sizeof(int)) == -1) {
+ LOG_ERROR("cannot set sock option 'TCP_NODELAY', errno: %s", strerror(errno));
+ return ERROR_FAIL;
+ }
+
+ optval = STLINK_TCP_RECV_BUFFER_SIZE;
+ if (setsockopt(h->tcp_backend_priv.fd, SOL_SOCKET, SO_RCVBUF, (const void *)&optval, sizeof(int)) == -1) {
+ LOG_ERROR("cannot set sock option 'SO_RCVBUF', errno: %s", strerror(errno));
+ return ERROR_FAIL;
+ }
+
+ optval = STLINK_TCP_SEND_BUFFER_SIZE;
+ if (setsockopt(h->tcp_backend_priv.fd, SOL_SOCKET, SO_SNDBUF, (const void *)&optval, sizeof(int)) == -1) {
+ LOG_ERROR("cannot set sock option 'SO_SNDBUF', errno: %s", strerror(errno));
+ return ERROR_FAIL;
+ }
+
+ if (connect(h->tcp_backend_priv.fd, (const struct sockaddr *)&serv, sizeof(serv)) == -1) {
+ LOG_ERROR("cannot connect to stlink server, errno: %s", strerror(errno));
+ return ERROR_FAIL;
+ }
+
+ h->tcp_backend_priv.connected = true;
+
+ LOG_INFO("connected to stlink-server");
+
+ /* print stlink-server version */
+ h->tcp_backend_priv.send_buf[0] = STLINK_TCP_CMD_GET_SERVER_VERSION;
+ h->tcp_backend_priv.send_buf[1] = OPENOCD_STLINK_TCP_API_VERSION;
+ memset(&h->tcp_backend_priv.send_buf[2], 0, 2); /* reserved */
+ ret = stlink_tcp_send_cmd(h, 4, 16, false);
+ if (ret != ERROR_OK) {
+ LOG_ERROR("cannot get the stlink-server version");
+ return ERROR_FAIL;
+ }
+
+ h->tcp_backend_priv.version.api = le_to_h_u32(&h->tcp_backend_priv.recv_buf[0]);
+ h->tcp_backend_priv.version.major = le_to_h_u32(&h->tcp_backend_priv.recv_buf[4]);
+ h->tcp_backend_priv.version.minor = le_to_h_u32(&h->tcp_backend_priv.recv_buf[8]);
+ h->tcp_backend_priv.version.build = le_to_h_u32(&h->tcp_backend_priv.recv_buf[12]);
+ LOG_INFO("stlink-server API v%d, version %d.%d.%d",
+ h->tcp_backend_priv.version.api,
+ h->tcp_backend_priv.version.major,
+ h->tcp_backend_priv.version.minor,
+ h->tcp_backend_priv.version.build);
+
+ /* in stlink-server API v1 sending more than 1428 bytes will cause stlink-server
+ * to crash in windows: select a safe default value (1K) */
+ if (h->tcp_backend_priv.version.api < 2)
+ h->max_mem_packet = (1 << 10);
+
+ /* refresh stlink list (re-enumerate) */
+ h->tcp_backend_priv.send_buf[0] = STLINK_TCP_CMD_REFRESH_DEVICE_LIST;
+ h->tcp_backend_priv.send_buf[1] = 0; /* don't clear the list, just refresh it */
+ ret = stlink_tcp_send_cmd(h, 2, 4, true);
+ if (ret != ERROR_OK)
+ return ret;
+
+ /* get the number of connected stlinks */
+ h->tcp_backend_priv.send_buf[0] = STLINK_TCP_CMD_GET_NB_DEV;
+ ret = stlink_tcp_send_cmd(h, 1, 4, false);
+ if (ret != ERROR_OK)
+ return ret;
+
+ uint32_t connected_stlinks = le_to_h_u32(h->tcp_backend_priv.recv_buf);
+
+ if (connected_stlinks == 0) {
+ LOG_ERROR("no ST-LINK detected");
+ return ERROR_FAIL;
+ }
+
+ LOG_DEBUG("%d ST-LINK detected", connected_stlinks);
+
+ if (connected_stlinks > 255) {
+ LOG_WARNING("STLink server cannot handle more than 255 ST-LINK connected");
+ connected_stlinks = 255;
+ }
+
+ /* list all connected ST-Link and seek for the requested vid:pid and serial */
+ char serial[STLINK_TCP_SERIAL_SIZE + 1] = {0};
+ uint8_t stlink_used;
+ bool stlink_id_matched = false;
+ const char *adapter_serial = adapter_get_required_serial();
+ bool stlink_serial_matched = !adapter_serial;
+
+ for (uint32_t stlink_id = 0; stlink_id < connected_stlinks; stlink_id++) {
+ /* get the stlink info */
+ h->tcp_backend_priv.send_buf[0] = STLINK_TCP_CMD_GET_DEV_INFO;
+ h->tcp_backend_priv.send_buf[1] = (uint8_t)stlink_id;
+ memset(&h->tcp_backend_priv.send_buf[2], 0, 2); /* reserved */
+ h_u32_to_le(&h->tcp_backend_priv.send_buf[4], 41); /* size of TDeviceInfo2 */
+ ret = stlink_tcp_send_cmd(h, 8, 45, true);
+ if (ret != ERROR_OK)
+ return ret;
+
+ h->tcp_backend_priv.device_id = le_to_h_u32(&h->tcp_backend_priv.recv_buf[4]);
+ memcpy(serial, &h->tcp_backend_priv.recv_buf[8], STLINK_TCP_SERIAL_SIZE);
+ h->vid = le_to_h_u16(&h->tcp_backend_priv.recv_buf[40]);
+ h->pid = le_to_h_u16(&h->tcp_backend_priv.recv_buf[42]);
+ stlink_used = h->tcp_backend_priv.recv_buf[44];
+
+ /* check the vid:pid */
+ for (int i = 0; param->vid[i]; i++) {
+ if (param->vid[i] == h->vid && param->pid[i] == h->pid) {
+ stlink_id_matched = true;
+ break;
+ }
}
- } else if (h->transport == HL_TRANSPORT_SWD) {
- if (h->version.flags & STLINK_F_HAS_SWD_SET_FREQ) {
- stlink_dump_speed_map(stlink_khz_to_speed_map_swd, ARRAY_SIZE(stlink_khz_to_speed_map_swd));
- stlink_speed(h, param->initial_interface_speed, false);
+
+ if (!stlink_id_matched)
+ continue;
+
+ /* check the serial if specified */
+ if (adapter_serial) {
+ /* ST-Link server fixes the buggy serial returned by old ST-Link DFU
+ * for further details refer to stlink_usb_get_alternate_serial
+ * so if the user passes the buggy serial, we need to fix it before
+ * comparing with the serial returned by ST-Link server */
+ if (strlen(adapter_serial) == STLINK_SERIAL_LEN / 2) {
+ char fixed_serial[STLINK_SERIAL_LEN + 1];
+
+ for (unsigned int i = 0; i < STLINK_SERIAL_LEN; i += 2)
+ sprintf(fixed_serial + i, "%02X", adapter_serial[i / 2]);
+
+ fixed_serial[STLINK_SERIAL_LEN] = '\0';
+
+ stlink_serial_matched = strcmp(fixed_serial, serial) == 0;
+ } else {
+ stlink_serial_matched = strcmp(adapter_serial, serial) == 0;
+ }
}
+
+ if (!stlink_serial_matched)
+ LOG_DEBUG("Device serial number '%s' doesn't match requested serial '%s'",
+ serial, adapter_serial);
+ else /* exit the search loop if there is match */
+ break;
}
- if (h->version.jtag_api == STLINK_JTAG_API_V3) {
- struct speed_map map[STLINK_V3_MAX_FREQ_NB];
+ if (!stlink_id_matched) {
+ LOG_ERROR("ST-LINK open failed (vid/pid mismatch)");
+ return ERROR_FAIL;
+ }
- stlink_get_com_freq(h, (h->transport == HL_TRANSPORT_JTAG), map);
- stlink_dump_speed_map(map, ARRAY_SIZE(map));
- stlink_speed(h, param->initial_interface_speed, false);
+ if (!stlink_serial_matched) {
+ LOG_ERROR("ST-LINK open failed (serial mismatch)");
+ return ERROR_FAIL;
+ }
+
+ /* check if device is 'exclusively' used by another application */
+ if (stlink_used) {
+ LOG_ERROR("the selected device is already used");
+ return ERROR_FAIL;
+ }
+
+ LOG_DEBUG("transport: vid: 0x%04x pid: 0x%04x serial: %s", h->vid, h->pid, serial);
+
+ /* now let's open the stlink */
+ h->tcp_backend_priv.send_buf[0] = STLINK_TCP_CMD_OPEN_DEV;
+ memset(&h->tcp_backend_priv.send_buf[1], 0, 4); /* reserved */
+ h_u32_to_le(&h->tcp_backend_priv.send_buf[4], h->tcp_backend_priv.device_id);
+ ret = stlink_tcp_send_cmd(h, 8, 8, true);
+ if (ret != ERROR_OK)
+ return ret;
+
+ h->tcp_backend_priv.connect_id = le_to_h_u32(&h->tcp_backend_priv.recv_buf[4]);
+
+ /* get stlink version */
+ return stlink_usb_version(h);
+}
+
+static struct stlink_backend_s stlink_usb_backend = {
+ .open = stlink_usb_usb_open,
+ .close = stlink_usb_usb_close,
+ .xfer_noerrcheck = stlink_usb_usb_xfer_noerrcheck,
+ .read_trace = stlink_usb_usb_read_trace,
+};
+
+static struct stlink_backend_s stlink_tcp_backend = {
+ .open = stlink_tcp_open,
+ .close = stlink_tcp_close,
+ .xfer_noerrcheck = stlink_tcp_xfer_noerrcheck,
+ .read_trace = stlink_tcp_read_trace,
+};
+
+static int stlink_open(struct hl_interface_param_s *param, enum stlink_mode mode, void **fd)
+{
+ struct stlink_usb_handle_s *h;
+
+ LOG_DEBUG("stlink_open");
+
+ h = calloc(1, sizeof(struct stlink_usb_handle_s));
+
+ if (h == 0) {
+ LOG_DEBUG("malloc failed");
+ return ERROR_FAIL;
+ }
+
+ h->st_mode = mode;
+
+ for (unsigned i = 0; param->vid[i]; i++) {
+ LOG_DEBUG("transport: %d vid: 0x%04x pid: 0x%04x serial: %s",
+ h->st_mode, param->vid[i], param->pid[i],
+ adapter_get_required_serial() ? adapter_get_required_serial() : "");
+ }
+
+ if (param->use_stlink_tcp)
+ h->backend = &stlink_tcp_backend;
+ else
+ h->backend = &stlink_usb_backend;
+
+ if (stlink_usb_open(h, param) != ERROR_OK)
+ goto error_open;
+
+ /* check if mode is supported */
+ int err = ERROR_OK;
+
+ switch (h->st_mode) {
+ case STLINK_MODE_DEBUG_SWD:
+ if (h->version.jtag_api == STLINK_JTAG_API_V1)
+ err = ERROR_FAIL;
+ /* fall-through */
+ case STLINK_MODE_DEBUG_JTAG:
+ if (h->version.jtag == 0)
+ err = ERROR_FAIL;
+ break;
+ case STLINK_MODE_DEBUG_SWIM:
+ if (h->version.swim == 0)
+ err = ERROR_FAIL;
+ break;
+ default:
+ err = ERROR_FAIL;
+ break;
+ }
+
+ if (err != ERROR_OK) {
+ LOG_ERROR("mode (transport) not supported by device");
+ goto error_open;
}
- /* get cpuid, so we can determine the max page size
- * start with a safe default */
- h->max_mem_packet = (1 << 10);
+ /* initialize the debug hardware */
+ err = stlink_usb_init_mode(h, param->connect_under_reset, param->initial_interface_speed);
+
+ if (err != ERROR_OK) {
+ LOG_ERROR("init mode failed (unable to connect to the target)");
+ goto error_open;
+ }
- uint8_t buffer[4];
- err = stlink_usb_read_mem32(h, CPUID, 4, buffer);
- if (err == ERROR_OK) {
- uint32_t cpuid = le_to_h_u32(buffer);
- int i = (cpuid >> 4) & 0xf;
- if (i == 4 || i == 3) {
- /* Cortex-M3/M4 has 4096 bytes autoincrement range */
- h->max_mem_packet = (1 << 12);
+ if (h->st_mode == STLINK_MODE_DEBUG_SWIM) {
+ err = stlink_swim_enter(h);
+ if (err != ERROR_OK) {
+ LOG_ERROR("stlink_swim_enter_failed (unable to connect to the target)");
+ goto error_open;
}
+ *fd = h;
+ h->max_mem_packet = STLINK_SWIM_DATA_SIZE;
+ return ERROR_OK;
}
- LOG_DEBUG("Using TAR autoincrement: %" PRIu32, h->max_mem_packet);
+ /* set max_mem_packet if it was not set by the low-level interface */
+ if (h->max_mem_packet == 0) {
+ /* get cpuid, so we can determine the max page size
+ * start with a safe default */
+ h->max_mem_packet = (1 << 10);
+
+ uint8_t buffer[4];
+ stlink_usb_open_ap(h, STLINK_HLA_AP_NUM);
+ err = stlink_usb_read_mem32(h, STLINK_HLA_AP_NUM, STLINK_HLA_CSW, CPUID, 4, buffer);
+ if (err == ERROR_OK) {
+ uint32_t cpuid = le_to_h_u32(buffer);
+ int i = (cpuid >> 4) & 0xf;
+ if (i == 4 || i == 3) {
+ /* Cortex-M3/M4 has 4096 bytes autoincrement range */
+ h->max_mem_packet = (1 << 12);
+ }
+ }
+
+ LOG_DEBUG("Using TAR autoincrement: %" PRIu32, h->max_mem_packet);
+ }
*fd = h;
return ERROR_OK;
error_open:
- stlink_usb_close(h);
-
+ stlink_close(h);
return ERROR_FAIL;
}
-int stlink_config_trace(void *handle, bool enabled, enum tpiu_pin_protocol pin_protocol,
- uint32_t port_size, unsigned int *trace_freq)
+static int stlink_usb_hl_open(struct hl_interface_param_s *param, void **fd)
+{
+ return stlink_open(param, stlink_get_mode(param->transport), fd);
+}
+
+static int stlink_config_trace(void *handle, bool enabled,
+ enum tpiu_pin_protocol pin_protocol, uint32_t port_size,
+ unsigned int *trace_freq, unsigned int traceclkin_freq,
+ uint16_t *prescaler)
{
struct stlink_usb_handle_s *h = handle;
- if (enabled && (!(h->version.flags & STLINK_F_HAS_TRACE) ||
- pin_protocol != TPIU_PIN_PROTOCOL_ASYNC_UART)) {
- LOG_ERROR("The attached ST-LINK version doesn't support this trace mode");
+ if (!(h->version.flags & STLINK_F_HAS_TRACE)) {
+ LOG_ERROR("The attached ST-LINK version doesn't support trace");
return ERROR_FAIL;
}
return ERROR_OK;
}
- if (*trace_freq > STLINK_TRACE_MAX_HZ) {
+ assert(trace_freq);
+ assert(prescaler);
+
+ if (pin_protocol != TPIU_PIN_PROTOCOL_ASYNC_UART) {
+ LOG_ERROR("The attached ST-LINK version doesn't support this trace mode");
+ return ERROR_FAIL;
+ }
+
+ unsigned int max_trace_freq = (h->version.stlink == 3) ?
+ STLINK_V3_TRACE_MAX_HZ : STLINK_TRACE_MAX_HZ;
+
+ /* Only concern ourselves with the frequency if the STlink is processing it. */
+ if (*trace_freq > max_trace_freq) {
LOG_ERROR("ST-LINK doesn't support SWO frequency higher than %u",
- STLINK_TRACE_MAX_HZ);
+ max_trace_freq);
+ return ERROR_FAIL;
+ }
+
+ if (!*trace_freq)
+ *trace_freq = max_trace_freq;
+
+ unsigned int presc = (traceclkin_freq + *trace_freq / 2) / *trace_freq;
+ if (presc == 0 || presc > TPIU_ACPR_MAX_SWOSCALER + 1) {
+ LOG_ERROR("SWO frequency is not suitable. Please choose a different "
+ "frequency.");
return ERROR_FAIL;
}
+ /* Probe's UART speed must be within 3% of the TPIU's SWO baud rate. */
+ unsigned int max_deviation = (traceclkin_freq * 3) / 100;
+ if (presc * *trace_freq < traceclkin_freq - max_deviation ||
+ presc * *trace_freq > traceclkin_freq + max_deviation) {
+ LOG_ERROR("SWO frequency is not suitable. Please choose a different "
+ "frequency.");
+ return ERROR_FAIL;
+ }
+
+ *prescaler = presc;
+
stlink_usb_trace_disable(h);
- if (!*trace_freq)
- *trace_freq = STLINK_TRACE_MAX_HZ;
h->trace.source_hz = *trace_freq;
return stlink_usb_trace_enable(h);
}
+/** */
+static int stlink_usb_init_access_port(void *handle, unsigned char ap_num)
+{
+ struct stlink_usb_handle_s *h = handle;
+
+ assert(handle);
+
+ if (!(h->version.flags & STLINK_F_HAS_AP_INIT))
+ return ERROR_COMMAND_NOTFOUND;
+
+ LOG_DEBUG_IO("init ap_num = %d", ap_num);
+ stlink_usb_init_buffer(handle, h->rx_ep, 16);
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_INIT_AP;
+ h->cmdbuf[h->cmdidx++] = ap_num;
+
+ return stlink_usb_xfer_errcheck(handle, h->databuf, 2);
+}
+
+/** */
+static int stlink_usb_close_access_port(void *handle, unsigned char ap_num)
+{
+ struct stlink_usb_handle_s *h = handle;
+
+ assert(handle);
+
+ if (!(h->version.flags & STLINK_F_HAS_AP_INIT))
+ return ERROR_COMMAND_NOTFOUND;
+
+ LOG_DEBUG_IO("close ap_num = %d", ap_num);
+ stlink_usb_init_buffer(handle, h->rx_ep, 16);
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_CLOSE_AP_DBG;
+ h->cmdbuf[h->cmdidx++] = ap_num;
+
+ /* ignore incorrectly returned error on bogus FW */
+ if (h->version.flags & STLINK_F_FIX_CLOSE_AP)
+ return stlink_usb_xfer_errcheck(handle, h->databuf, 2);
+ else
+ return stlink_usb_xfer_noerrcheck(handle, h->databuf, 2);
+
+}
+
+static int stlink_usb_rw_misc_out(void *handle, uint32_t items, const uint8_t *buffer)
+{
+ struct stlink_usb_handle_s *h = handle;
+ unsigned int buflen = ALIGN_UP(items, 4) + 4 * items;
+
+ LOG_DEBUG_IO("%s(%" PRIu32 ")", __func__, items);
+
+ assert(handle != NULL);
+
+ if (!(h->version.flags & STLINK_F_HAS_RW_MISC))
+ return ERROR_COMMAND_NOTFOUND;
+
+ stlink_usb_init_buffer(handle, h->tx_ep, buflen);
+
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_RW_MISC_OUT;
+ h_u32_to_le(&h->cmdbuf[2], items);
+
+ return stlink_usb_xfer_noerrcheck(handle, buffer, buflen);
+}
+
+static int stlink_usb_rw_misc_in(void *handle, uint32_t items, uint8_t *buffer)
+{
+ struct stlink_usb_handle_s *h = handle;
+ unsigned int buflen = 2 * 4 * items;
+
+ LOG_DEBUG_IO("%s(%" PRIu32 ")", __func__, items);
+
+ assert(handle != NULL);
+
+ if (!(h->version.flags & STLINK_F_HAS_RW_MISC))
+ return ERROR_COMMAND_NOTFOUND;
+
+ stlink_usb_init_buffer(handle, h->rx_ep, buflen);
+
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_RW_MISC_IN;
+
+ int res = stlink_usb_xfer_noerrcheck(handle, h->databuf, buflen);
+ if (res != ERROR_OK)
+ return res;
+
+ memcpy(buffer, h->databuf, buflen);
+
+ return ERROR_OK;
+}
+
+/** */
+static int stlink_read_dap_register(void *handle, unsigned short dap_port,
+ unsigned short addr, uint32_t *val)
+{
+ struct stlink_usb_handle_s *h = handle;
+ int retval;
+
+ assert(handle);
+
+ if (!(h->version.flags & STLINK_F_HAS_DAP_REG))
+ return ERROR_COMMAND_NOTFOUND;
+
+ stlink_usb_init_buffer(handle, h->rx_ep, 16);
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_READ_DAP_REG;
+ h_u16_to_le(&h->cmdbuf[2], dap_port);
+ h_u16_to_le(&h->cmdbuf[4], addr);
+
+ retval = stlink_usb_xfer_errcheck(handle, h->databuf, 8);
+ *val = le_to_h_u32(h->databuf + 4);
+ LOG_DEBUG_IO("dap_port_read = %d, addr = 0x%x, value = 0x%" PRIx32, dap_port, addr, *val);
+ return retval;
+}
+
+/** */
+static int stlink_write_dap_register(void *handle, unsigned short dap_port,
+ unsigned short addr, uint32_t val)
+{
+ struct stlink_usb_handle_s *h = handle;
+
+ assert(handle);
+
+ if (!(h->version.flags & STLINK_F_HAS_DAP_REG))
+ return ERROR_COMMAND_NOTFOUND;
+
+ LOG_DEBUG_IO("dap_write port = %d, addr = 0x%x, value = 0x%" PRIx32, dap_port, addr, val);
+ stlink_usb_init_buffer(handle, h->rx_ep, 16);
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
+ h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_WRITE_DAP_REG;
+ h_u16_to_le(&h->cmdbuf[2], dap_port);
+ h_u16_to_le(&h->cmdbuf[4], addr);
+ h_u32_to_le(&h->cmdbuf[6], val);
+ return stlink_usb_xfer_errcheck(handle, h->databuf, 2);
+}
+
/** */
struct hl_layout_api_s stlink_usb_layout_api = {
/** */
- .open = stlink_usb_open,
+ .open = stlink_usb_hl_open,
/** */
- .close = stlink_usb_close,
+ .close = stlink_close,
/** */
.idcode = stlink_usb_idcode,
/** */
/** */
.poll_trace = stlink_usb_trace_read,
};
+
+/*****************************************************************************
+ * DAP direct interface
+ */
+
+static struct stlink_usb_handle_s *stlink_dap_handle;
+static struct hl_interface_param_s stlink_dap_param;
+static DECLARE_BITMAP(opened_ap, DP_APSEL_MAX + 1);
+static uint32_t last_csw_default[DP_APSEL_MAX + 1];
+static int stlink_dap_error = ERROR_OK;
+
+/** */
+static int stlink_dap_record_error(int error)
+{
+ if (stlink_dap_error == ERROR_OK)
+ stlink_dap_error = error;
+ return ERROR_OK;
+}
+
+/** */
+static int stlink_dap_get_and_clear_error(void)
+{
+ int retval = stlink_dap_error;
+ stlink_dap_error = ERROR_OK;
+ return retval;
+}
+
+static int stlink_dap_get_error(void)
+{
+ return stlink_dap_error;
+}
+
+static int stlink_usb_open_ap(void *handle, unsigned short apsel)
+{
+ struct stlink_usb_handle_s *h = handle;
+ int retval;
+
+ /* nothing to do on old versions */
+ if (!(h->version.flags & STLINK_F_HAS_AP_INIT))
+ return ERROR_OK;
+
+ if (apsel > DP_APSEL_MAX)
+ return ERROR_FAIL;
+
+ if (test_bit(apsel, opened_ap))
+ return ERROR_OK;
+
+ retval = stlink_usb_init_access_port(h, apsel);
+ if (retval != ERROR_OK)
+ return retval;
+
+ LOG_DEBUG("AP %d enabled", apsel);
+ set_bit(apsel, opened_ap);
+ last_csw_default[apsel] = 0;
+ return ERROR_OK;
+}
+
+static int stlink_dap_open_ap(unsigned short apsel)
+{
+ return stlink_usb_open_ap(stlink_dap_handle, apsel);
+}
+
+/** */
+static int stlink_dap_closeall_ap(void)
+{
+ int retval, apsel;
+
+ /* nothing to do on old versions */
+ if (!(stlink_dap_handle->version.flags & STLINK_F_HAS_AP_INIT))
+ return ERROR_OK;
+
+ for (apsel = 0; apsel <= DP_APSEL_MAX; apsel++) {
+ if (!test_bit(apsel, opened_ap))
+ continue;
+ retval = stlink_usb_close_access_port(stlink_dap_handle, apsel);
+ if (retval != ERROR_OK)
+ return retval;
+ clear_bit(apsel, opened_ap);
+ }
+ return ERROR_OK;
+}
+
+/** */
+static int stlink_dap_reinit_interface(void)
+{
+ int retval;
+
+ /*
+ * On JTAG only, it should be enough to call stlink_usb_reset(). But on
+ * some firmware version it does not work as expected, and there is no
+ * equivalent for SWD.
+ * At least for now, to reset the interface quit from JTAG/SWD mode then
+ * select the mode again.
+ */
+
+ if (!stlink_dap_handle->reconnect_pending) {
+ stlink_dap_handle->reconnect_pending = true;
+ stlink_usb_mode_leave(stlink_dap_handle, stlink_dap_handle->st_mode);
+ }
+
+ retval = stlink_usb_mode_enter(stlink_dap_handle, stlink_dap_handle->st_mode);
+ if (retval != ERROR_OK)
+ return retval;
+
+ stlink_dap_handle->reconnect_pending = false;
+ /* on new FW, calling mode-leave closes all the opened AP; reopen them! */
+ if (stlink_dap_handle->version.flags & STLINK_F_HAS_AP_INIT)
+ for (int apsel = 0; apsel <= DP_APSEL_MAX; apsel++)
+ if (test_bit(apsel, opened_ap)) {
+ clear_bit(apsel, opened_ap);
+ stlink_dap_open_ap(apsel);
+ }
+ return ERROR_OK;
+}
+
+/** */
+static int stlink_dap_op_connect(struct adiv5_dap *dap)
+{
+ uint32_t idcode;
+ int retval;
+
+ LOG_INFO("stlink_dap_op_connect(%sconnect)", dap->do_reconnect ? "re" : "");
+
+ /* Check if we should reset srst already when connecting, but not if reconnecting. */
+ if (!dap->do_reconnect) {
+ enum reset_types jtag_reset_config = jtag_get_reset_config();
+
+ if (jtag_reset_config & RESET_CNCT_UNDER_SRST) {
+ if (jtag_reset_config & RESET_SRST_NO_GATING)
+ adapter_assert_reset();
+ else
+ LOG_WARNING("\'srst_nogate\' reset_config option is required");
+ }
+ }
+
+ dap->do_reconnect = false;
+ dap_invalidate_cache(dap);
+ for (unsigned int i = 0; i <= DP_APSEL_MAX; i++)
+ last_csw_default[i] = 0;
+
+ retval = dap_dp_init(dap);
+ if (retval != ERROR_OK) {
+ dap->do_reconnect = true;
+ return retval;
+ }
+
+ retval = stlink_usb_idcode(stlink_dap_handle, &idcode);
+ if (retval == ERROR_OK)
+ LOG_INFO("%s %#8.8" PRIx32,
+ (stlink_dap_handle->st_mode == STLINK_MODE_DEBUG_JTAG) ? "JTAG IDCODE" : "SWD DPIDR",
+ idcode);
+ else
+ dap->do_reconnect = true;
+
+ return retval;
+}
+
+/** */
+static int stlink_dap_check_reconnect(struct adiv5_dap *dap)
+{
+ int retval;
+
+ if (!dap->do_reconnect)
+ return ERROR_OK;
+
+ retval = stlink_dap_reinit_interface();
+ if (retval != ERROR_OK)
+ return retval;
+
+ return stlink_dap_op_connect(dap);
+}
+
+/** */
+static int stlink_dap_op_send_sequence(struct adiv5_dap *dap, enum swd_special_seq seq)
+{
+ /* Ignore the request */
+ return ERROR_OK;
+}
+
+/** */
+static int stlink_dap_dp_read(struct adiv5_dap *dap, unsigned int reg, uint32_t *data)
+{
+ uint32_t dummy;
+ int retval;
+
+ if (!(stlink_dap_handle->version.flags & STLINK_F_HAS_DPBANKSEL))
+ if (reg & 0x000000F0) {
+ LOG_ERROR("Banked DP registers not supported in current STLink FW");
+ return ERROR_COMMAND_NOTFOUND;
+ }
+
+ data = data ? data : &dummy;
+ if (stlink_dap_handle->version.flags & STLINK_F_QUIRK_JTAG_DP_READ
+ && stlink_dap_handle->st_mode == STLINK_MODE_DEBUG_JTAG) {
+ /* Quirk required in JTAG. Read RDBUFF to get the data */
+ retval = stlink_read_dap_register(stlink_dap_handle,
+ STLINK_DEBUG_PORT_ACCESS, reg, &dummy);
+ if (retval == ERROR_OK)
+ retval = stlink_read_dap_register(stlink_dap_handle,
+ STLINK_DEBUG_PORT_ACCESS, DP_RDBUFF, data);
+ } else {
+ retval = stlink_read_dap_register(stlink_dap_handle,
+ STLINK_DEBUG_PORT_ACCESS, reg, data);
+ }
+
+ return retval;
+}
+
+/** */
+static int stlink_dap_dp_write(struct adiv5_dap *dap, unsigned int reg, uint32_t data)
+{
+ int retval;
+
+ if (!(stlink_dap_handle->version.flags & STLINK_F_HAS_DPBANKSEL))
+ if (reg & 0x000000F0) {
+ LOG_ERROR("Banked DP registers not supported in current STLink FW");
+ return ERROR_COMMAND_NOTFOUND;
+ }
+
+ if (reg == DP_SELECT && (data & DP_SELECT_DPBANK) != 0) {
+ /* ignored if STLINK_F_HAS_DPBANKSEL, not properly managed otherwise */
+ LOG_DEBUG("Ignoring DPBANKSEL while write SELECT");
+ data &= ~DP_SELECT_DPBANK;
+ }
+
+ /* ST-Link does not like that we set CORUNDETECT */
+ if (reg == DP_CTRL_STAT)
+ data &= ~CORUNDETECT;
+
+ retval = stlink_write_dap_register(stlink_dap_handle,
+ STLINK_DEBUG_PORT_ACCESS, reg, data);
+ return retval;
+}
+
+/** */
+static int stlink_dap_ap_read(struct adiv5_ap *ap, unsigned int reg, uint32_t *data)
+{
+ struct adiv5_dap *dap = ap->dap;
+ uint32_t dummy;
+ int retval;
+
+ if (reg != AP_REG_IDR) {
+ retval = stlink_dap_open_ap(ap->ap_num);
+ if (retval != ERROR_OK)
+ return retval;
+ }
+ data = data ? data : &dummy;
+ retval = stlink_read_dap_register(stlink_dap_handle, ap->ap_num, reg,
+ data);
+ dap->stlink_flush_ap_write = false;
+ return retval;
+}
+
+/** */
+static int stlink_dap_ap_write(struct adiv5_ap *ap, unsigned int reg, uint32_t data)
+{
+ struct adiv5_dap *dap = ap->dap;
+ int retval;
+
+ retval = stlink_dap_open_ap(ap->ap_num);
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = stlink_write_dap_register(stlink_dap_handle, ap->ap_num, reg,
+ data);
+ dap->stlink_flush_ap_write = true;
+ return retval;
+}
+
+/** */
+static int stlink_dap_op_queue_ap_abort(struct adiv5_dap *dap, uint8_t *ack)
+{
+ LOG_WARNING("stlink_dap_op_queue_ap_abort()");
+ return ERROR_OK;
+}
+
+#define RW_MISC_CMD_ADDRESS 1
+#define RW_MISC_CMD_WRITE 2
+#define RW_MISC_CMD_READ 3
+#define RW_MISC_CMD_APNUM 5
+
+static int stlink_usb_misc_rw_segment(void *handle, const struct dap_queue *q, unsigned int len, unsigned int items)
+{
+ uint8_t buf[2 * 4 * items];
+
+ LOG_DEBUG("Queue: %u commands in %u items", len, items);
+
+ int ap_num = DP_APSEL_INVALID;
+ unsigned int cmd_index = 0;
+ unsigned int val_index = ALIGN_UP(items, 4);
+ for (unsigned int i = 0; i < len; i++) {
+ if (ap_num != q[i].mem_ap.ap->ap_num) {
+ ap_num = q[i].mem_ap.ap->ap_num;
+ buf[cmd_index++] = RW_MISC_CMD_APNUM;
+ h_u32_to_le(&buf[val_index], ap_num);
+ val_index += 4;
+ }
+
+ switch (q[i].cmd) {
+ case CMD_MEM_AP_READ32:
+ buf[cmd_index++] = RW_MISC_CMD_READ;
+ h_u32_to_le(&buf[val_index], q[i].mem_ap.addr);
+ val_index += 4;
+ break;
+ case CMD_MEM_AP_WRITE32:
+ buf[cmd_index++] = RW_MISC_CMD_ADDRESS;
+ h_u32_to_le(&buf[val_index], q[i].mem_ap.addr);
+ val_index += 4;
+ buf[cmd_index++] = RW_MISC_CMD_WRITE;
+ h_u32_to_le(&buf[val_index], q[i].mem_ap.data);
+ val_index += 4;
+ break;
+ default:
+ /* Not supposed to happen */
+ return ERROR_FAIL;
+ }
+ }
+ /* pad after last command */
+ while (!IS_ALIGNED(cmd_index, 4))
+ buf[cmd_index++] = 0;
+
+ int retval = stlink_usb_rw_misc_out(handle, items, buf);
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = stlink_usb_rw_misc_in(handle, items, buf);
+ if (retval != ERROR_OK)
+ return retval;
+
+ ap_num = DP_APSEL_INVALID;
+ val_index = 0;
+ unsigned int err_index = 4 * items;
+ for (unsigned int i = 0; i < len; i++) {
+ uint32_t errcode = le_to_h_u32(&buf[err_index]);
+ if (errcode != STLINK_DEBUG_ERR_OK) {
+ LOG_ERROR("unknown/unexpected STLINK status code 0x%x", errcode);
+ return ERROR_FAIL;
+ }
+ if (ap_num != q[i].mem_ap.ap->ap_num) {
+ ap_num = q[i].mem_ap.ap->ap_num;
+ err_index += 4;
+ val_index += 4;
+ errcode = le_to_h_u32(&buf[err_index]);
+ if (errcode != STLINK_DEBUG_ERR_OK) {
+ LOG_ERROR("unknown/unexpected STLINK status code 0x%x", errcode);
+ return ERROR_FAIL;
+ }
+ }
+
+ if (q[i].cmd == CMD_MEM_AP_READ32) {
+ *q[i].mem_ap.p_data = le_to_h_u32(&buf[val_index]);
+ } else { /* q[i]->cmd == CMD_MEM_AP_WRITE32 */
+ err_index += 4;
+ val_index += 4;
+ errcode = le_to_h_u32(&buf[err_index]);
+ if (errcode != STLINK_DEBUG_ERR_OK) {
+ LOG_ERROR("unknown/unexpected STLINK status code 0x%x", errcode);
+ return ERROR_FAIL;
+ }
+ }
+ err_index += 4;
+ val_index += 4;
+ }
+
+ return ERROR_OK;
+}
+
+static int stlink_usb_buf_rw_segment(void *handle, const struct dap_queue *q, unsigned int count)
+{
+ uint32_t bufsize = count * CMD_MEM_AP_2_SIZE(q[0].cmd);
+ uint8_t buf[bufsize];
+ uint8_t ap_num = q[0].mem_ap.ap->ap_num;
+ uint32_t addr = q[0].mem_ap.addr;
+ uint32_t csw = q[0].mem_ap.csw;
+
+ int retval = stlink_dap_open_ap(ap_num);
+ if (retval != ERROR_OK)
+ return retval;
+
+ switch (q[0].cmd) {
+ case CMD_MEM_AP_WRITE8:
+ for (unsigned int i = 0; i < count; i++)
+ buf[i] = q[i].mem_ap.data >> 8 * (q[i].mem_ap.addr & 3);
+ return stlink_usb_write_mem8(stlink_dap_handle, ap_num, csw, addr, bufsize, buf);
+
+ case CMD_MEM_AP_WRITE16:
+ for (unsigned int i = 0; i < count; i++)
+ h_u16_to_le(&buf[2 * i], q[i].mem_ap.data >> 8 * (q[i].mem_ap.addr & 2));
+ return stlink_usb_write_mem16(stlink_dap_handle, ap_num, csw, addr, bufsize, buf);
+
+ case CMD_MEM_AP_WRITE32:
+ for (unsigned int i = 0; i < count; i++)
+ h_u32_to_le(&buf[4 * i], q[i].mem_ap.data);
+ if (count > 1 && q[0].mem_ap.addr == q[1].mem_ap.addr)
+ return stlink_usb_write_mem32_noaddrinc(stlink_dap_handle, ap_num, csw, addr, bufsize, buf);
+ else
+ return stlink_usb_write_mem32(stlink_dap_handle, ap_num, csw, addr, bufsize, buf);
+
+ case CMD_MEM_AP_READ8:
+ retval = stlink_usb_read_mem8(stlink_dap_handle, ap_num, csw, addr, bufsize, buf);
+ if (retval == ERROR_OK)
+ for (unsigned int i = 0; i < count; i++)
+ *q[i].mem_ap.p_data = buf[i] << 8 * (q[i].mem_ap.addr & 3);
+ return retval;
+
+ case CMD_MEM_AP_READ16:
+ retval = stlink_usb_read_mem16(stlink_dap_handle, ap_num, csw, addr, bufsize, buf);
+ if (retval == ERROR_OK)
+ for (unsigned int i = 0; i < count; i++)
+ *q[i].mem_ap.p_data = le_to_h_u16(&buf[2 * i]) << 8 * (q[i].mem_ap.addr & 2);
+ return retval;
+
+ case CMD_MEM_AP_READ32:
+ if (count > 1 && q[0].mem_ap.addr == q[1].mem_ap.addr)
+ retval = stlink_usb_read_mem32_noaddrinc(stlink_dap_handle, ap_num, csw, addr, bufsize, buf);
+ else
+ retval = stlink_usb_read_mem32(stlink_dap_handle, ap_num, csw, addr, bufsize, buf);
+ if (retval == ERROR_OK)
+ for (unsigned int i = 0; i < count; i++)
+ *q[i].mem_ap.p_data = le_to_h_u32(&buf[4 * i]);
+ return retval;
+
+ default:
+ return ERROR_FAIL;
+ };
+}
+
+/* TODO: recover these values with cmd STLINK_DEBUG_APIV2_RW_MISC_GET_MAX (0x53) */
+#define STLINK_V2_RW_MISC_SIZE (64)
+#define STLINK_V3_RW_MISC_SIZE (1227)
+
+static int stlink_usb_count_misc_rw_queue(void *handle, const struct dap_queue *q, unsigned int len,
+ unsigned int *pkt_items)
+{
+ struct stlink_usb_handle_s *h = handle;
+ unsigned int i, items = 0;
+ int ap_num = DP_APSEL_INVALID;
+ unsigned int misc_max_items = (h->version.stlink == 2) ? STLINK_V2_RW_MISC_SIZE : STLINK_V3_RW_MISC_SIZE;
+
+ if (!(h->version.flags & STLINK_F_HAS_RW_MISC))
+ return 0;
+ /*
+ * Before stlink-server API v3, RW_MISC sequence doesn't lock the st-link,
+ * so are not safe in shared mode.
+ * Don't use it with TCP backend to prevent any issue in case of sharing.
+ * This further degrades the performance, on top of TCP server overhead.
+ */
+ if (h->backend == &stlink_tcp_backend && h->tcp_backend_priv.version.api < 3)
+ return 0;
+
+ for (i = 0; i < len; i++) {
+ if (q[i].cmd != CMD_MEM_AP_READ32 && q[i].cmd != CMD_MEM_AP_WRITE32)
+ break;
+ unsigned int count = 1;
+ if (ap_num != q[i].mem_ap.ap->ap_num) {
+ count++;
+ ap_num = q[i].mem_ap.ap->ap_num;
+ }
+ if (q[i].cmd == CMD_MEM_AP_WRITE32)
+ count++;
+ if (items + count > misc_max_items)
+ break;
+ items += count;
+ }
+
+ *pkt_items = items;
+
+ return i;
+}
+
+static int stlink_usb_count_buf_rw_queue(const struct dap_queue *q, unsigned int len)
+{
+ uint32_t incr = CMD_MEM_AP_2_SIZE(q[0].cmd);
+ unsigned int len_max;
+
+ if (incr == 1)
+ len_max = stlink_usb_block(stlink_dap_handle);
+ else
+ len_max = STLINK_MAX_RW16_32 / incr;
+
+ /* check for no address increment, 32 bits only */
+ if (len > 1 && incr == 4 && q[0].mem_ap.addr == q[1].mem_ap.addr)
+ incr = 0;
+
+ if (len > len_max)
+ len = len_max;
+
+ for (unsigned int i = 1; i < len; i++)
+ if (q[i].cmd != q[0].cmd ||
+ q[i].mem_ap.ap != q[0].mem_ap.ap ||
+ q[i].mem_ap.csw != q[0].mem_ap.csw ||
+ q[i].mem_ap.addr != q[i - 1].mem_ap.addr + incr)
+ return i;
+
+ return len;
+}
+
+static int stlink_usb_mem_rw_queue(void *handle, const struct dap_queue *q, unsigned int len, unsigned int *skip)
+{
+ unsigned int count, misc_items = 0;
+ int retval;
+
+ unsigned int count_misc = stlink_usb_count_misc_rw_queue(handle, q, len, &misc_items);
+ unsigned int count_buf = stlink_usb_count_buf_rw_queue(q, len);
+
+ if (count_misc > count_buf) {
+ count = count_misc;
+ retval = stlink_usb_misc_rw_segment(handle, q, count, misc_items);
+ } else {
+ count = count_buf;
+ retval = stlink_usb_buf_rw_segment(handle, q, count_buf);
+ }
+ if (retval != ERROR_OK)
+ return retval;
+
+ *skip = count;
+ return ERROR_OK;
+}
+
+static void stlink_dap_run_internal(struct adiv5_dap *dap)
+{
+ int retval = stlink_dap_check_reconnect(dap);
+ if (retval != ERROR_OK) {
+ stlink_dap_handle->queue_index = 0;
+ stlink_dap_record_error(retval);
+ return;
+ }
+
+ unsigned int i = stlink_dap_handle->queue_index;
+ struct dap_queue *q = &stlink_dap_handle->queue[0];
+
+ while (i && stlink_dap_get_error() == ERROR_OK) {
+ unsigned int skip = 1;
+
+ switch (q->cmd) {
+ case CMD_DP_READ:
+ retval = stlink_dap_dp_read(q->dp_r.dap, q->dp_r.reg, q->dp_r.p_data);
+ break;
+ case CMD_DP_WRITE:
+ retval = stlink_dap_dp_write(q->dp_w.dap, q->dp_w.reg, q->dp_w.data);
+ break;
+ case CMD_AP_READ:
+ retval = stlink_dap_ap_read(q->ap_r.ap, q->ap_r.reg, q->ap_r.p_data);
+ break;
+ case CMD_AP_WRITE:
+ /* ignore increment packed, not supported */
+ if (q->ap_w.reg == MEM_AP_REG_CSW)
+ q->ap_w.data &= ~CSW_ADDRINC_PACKED;
+ retval = stlink_dap_ap_write(q->ap_w.ap, q->ap_w.reg, q->ap_w.data);
+ break;
+
+ case CMD_MEM_AP_READ8:
+ case CMD_MEM_AP_READ16:
+ case CMD_MEM_AP_READ32:
+ case CMD_MEM_AP_WRITE8:
+ case CMD_MEM_AP_WRITE16:
+ case CMD_MEM_AP_WRITE32:
+ retval = stlink_usb_mem_rw_queue(stlink_dap_handle, q, i, &skip);
+ break;
+
+ default:
+ LOG_ERROR("ST-Link: Unknown queue command %d", q->cmd);
+ retval = ERROR_FAIL;
+ break;
+ }
+ stlink_dap_record_error(retval);
+ q += skip;
+ i -= skip;
+ }
+
+ stlink_dap_handle->queue_index = 0;
+}
+
+/** */
+static int stlink_dap_run_finalize(struct adiv5_dap *dap)
+{
+ uint32_t ctrlstat, pwrmask;
+ int retval, saved_retval;
+
+ /* Here no LOG_DEBUG. This is called continuously! */
+
+ /*
+ * ST-Link returns immediately after a DAP write, without waiting for it
+ * to complete.
+ * Run a dummy read to DP_RDBUFF, as suggested in
+ * http://infocenter.arm.com/help/topic/com.arm.doc.faqs/ka16363.html
+ */
+ if (dap->stlink_flush_ap_write) {
+ dap->stlink_flush_ap_write = false;
+ retval = stlink_dap_dp_read(dap, DP_RDBUFF, NULL);
+ if (retval != ERROR_OK) {
+ dap->do_reconnect = true;
+ return retval;
+ }
+ }
+
+ saved_retval = stlink_dap_get_and_clear_error();
+
+ retval = stlink_dap_dp_read(dap, DP_CTRL_STAT, &ctrlstat);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("Fail reading CTRL/STAT register. Force reconnect");
+ dap->do_reconnect = true;
+ return retval;
+ }
+
+ if (ctrlstat & SSTICKYERR) {
+ if (stlink_dap_handle->st_mode == STLINK_MODE_DEBUG_JTAG)
+ retval = stlink_dap_dp_write(dap, DP_CTRL_STAT,
+ ctrlstat & (dap->dp_ctrl_stat | SSTICKYERR));
+ else
+ retval = stlink_dap_dp_write(dap, DP_ABORT, STKERRCLR);
+ if (retval != ERROR_OK) {
+ dap->do_reconnect = true;
+ return retval;
+ }
+ }
+
+ /* check for power lost */
+ pwrmask = dap->dp_ctrl_stat & (CDBGPWRUPREQ | CSYSPWRUPREQ);
+ if ((ctrlstat & pwrmask) != pwrmask)
+ dap->do_reconnect = true;
+
+ return saved_retval;
+}
+
+static int stlink_dap_op_queue_run(struct adiv5_dap *dap)
+{
+ stlink_dap_run_internal(dap);
+ return stlink_dap_run_finalize(dap);
+}
+
+/** */
+static void stlink_dap_op_quit(struct adiv5_dap *dap)
+{
+ int retval;
+
+ retval = stlink_dap_closeall_ap();
+ if (retval != ERROR_OK)
+ LOG_ERROR("Error closing APs");
+}
+
+static int stlink_dap_op_queue_dp_read(struct adiv5_dap *dap, unsigned int reg,
+ uint32_t *data)
+{
+ if (stlink_dap_get_error() != ERROR_OK)
+ return ERROR_OK;
+
+ unsigned int i = stlink_dap_handle->queue_index++;
+ struct dap_queue *q = &stlink_dap_handle->queue[i];
+ q->cmd = CMD_DP_READ;
+ q->dp_r.reg = reg;
+ q->dp_r.dap = dap;
+ q->dp_r.p_data = data;
+
+ if (i == MAX_QUEUE_DEPTH - 1)
+ stlink_dap_run_internal(dap);
+
+ return ERROR_OK;
+}
+
+static int stlink_dap_op_queue_dp_write(struct adiv5_dap *dap, unsigned int reg,
+ uint32_t data)
+{
+ if (stlink_dap_get_error() != ERROR_OK)
+ return ERROR_OK;
+
+ unsigned int i = stlink_dap_handle->queue_index++;
+ struct dap_queue *q = &stlink_dap_handle->queue[i];
+ q->cmd = CMD_DP_WRITE;
+ q->dp_w.reg = reg;
+ q->dp_w.dap = dap;
+ q->dp_w.data = data;
+
+ if (i == MAX_QUEUE_DEPTH - 1)
+ stlink_dap_run_internal(dap);
+
+ return ERROR_OK;
+}
+
+static int stlink_dap_op_queue_ap_read(struct adiv5_ap *ap, unsigned int reg,
+ uint32_t *data)
+{
+ if (stlink_dap_get_error() != ERROR_OK)
+ return ERROR_OK;
+
+ unsigned int i = stlink_dap_handle->queue_index++;
+ struct dap_queue *q = &stlink_dap_handle->queue[i];
+
+ /* test STLINK_F_HAS_CSW implicitly tests STLINK_F_HAS_MEM_16BIT, STLINK_F_HAS_MEM_RD_NO_INC
+ * and STLINK_F_HAS_RW_MISC */
+ if ((stlink_dap_handle->version.flags & STLINK_F_HAS_CSW) &&
+ (reg == MEM_AP_REG_DRW || reg == MEM_AP_REG_BD0 || reg == MEM_AP_REG_BD1 ||
+ reg == MEM_AP_REG_BD2 || reg == MEM_AP_REG_BD3)) {
+ /* de-queue previous write-TAR */
+ struct dap_queue *prev_q = q - 1;
+ if (i && prev_q->cmd == CMD_AP_WRITE && prev_q->ap_w.ap == ap && prev_q->ap_w.reg == MEM_AP_REG_TAR) {
+ stlink_dap_handle->queue_index = i;
+ i--;
+ q = prev_q;
+ prev_q--;
+ }
+ /* de-queue previous write-CSW if it didn't changed ap->csw_default */
+ if (i && prev_q->cmd == CMD_AP_WRITE && prev_q->ap_w.ap == ap && prev_q->ap_w.reg == MEM_AP_REG_CSW &&
+ !prev_q->ap_w.changes_csw_default) {
+ stlink_dap_handle->queue_index = i;
+ q = prev_q;
+ }
+
+ switch (ap->csw_value & CSW_SIZE_MASK) {
+ case CSW_8BIT:
+ q->cmd = CMD_MEM_AP_READ8;
+ break;
+ case CSW_16BIT:
+ q->cmd = CMD_MEM_AP_READ16;
+ break;
+ case CSW_32BIT:
+ q->cmd = CMD_MEM_AP_READ32;
+ break;
+ default:
+ LOG_ERROR("ST-Link: Unsupported CSW size %d", ap->csw_value & CSW_SIZE_MASK);
+ stlink_dap_record_error(ERROR_FAIL);
+ return ERROR_FAIL;
+ }
+
+ q->mem_ap.addr = (reg == MEM_AP_REG_DRW) ? ap->tar_value : ((ap->tar_value & ~0x0f) | (reg & 0x0c));
+ q->mem_ap.ap = ap;
+ q->mem_ap.p_data = data;
+ q->mem_ap.csw = ap->csw_default;
+
+ /* force TAR and CSW update */
+ ap->tar_valid = false;
+ ap->csw_value = 0;
+ } else {
+ q->cmd = CMD_AP_READ;
+ q->ap_r.reg = reg;
+ q->ap_r.ap = ap;
+ q->ap_r.p_data = data;
+ }
+
+ if (i == MAX_QUEUE_DEPTH - 1)
+ stlink_dap_run_internal(ap->dap);
+
+ return ERROR_OK;
+}
+
+static int stlink_dap_op_queue_ap_write(struct adiv5_ap *ap, unsigned int reg,
+ uint32_t data)
+{
+ if (stlink_dap_get_error() != ERROR_OK)
+ return ERROR_OK;
+
+ unsigned int i = stlink_dap_handle->queue_index++;
+ struct dap_queue *q = &stlink_dap_handle->queue[i];
+
+ /* test STLINK_F_HAS_CSW implicitly tests STLINK_F_HAS_MEM_16BIT, STLINK_F_HAS_MEM_WR_NO_INC
+ * and STLINK_F_HAS_RW_MISC */
+ if ((stlink_dap_handle->version.flags & STLINK_F_HAS_CSW) &&
+ (reg == MEM_AP_REG_DRW || reg == MEM_AP_REG_BD0 || reg == MEM_AP_REG_BD1 ||
+ reg == MEM_AP_REG_BD2 || reg == MEM_AP_REG_BD3)) {
+ /* de-queue previous write-TAR */
+ struct dap_queue *prev_q = q - 1;
+ if (i && prev_q->cmd == CMD_AP_WRITE && prev_q->ap_w.ap == ap && prev_q->ap_w.reg == MEM_AP_REG_TAR) {
+ stlink_dap_handle->queue_index = i;
+ i--;
+ q = prev_q;
+ prev_q--;
+ }
+ /* de-queue previous write-CSW if it didn't changed ap->csw_default */
+ if (i && prev_q->cmd == CMD_AP_WRITE && prev_q->ap_w.ap == ap && prev_q->ap_w.reg == MEM_AP_REG_CSW &&
+ !prev_q->ap_w.changes_csw_default) {
+ stlink_dap_handle->queue_index = i;
+ q = prev_q;
+ }
+
+ switch (ap->csw_value & CSW_SIZE_MASK) {
+ case CSW_8BIT:
+ q->cmd = CMD_MEM_AP_WRITE8;
+ break;
+ case CSW_16BIT:
+ q->cmd = CMD_MEM_AP_WRITE16;
+ break;
+ case CSW_32BIT:
+ q->cmd = CMD_MEM_AP_WRITE32;
+ break;
+ default:
+ LOG_ERROR("ST-Link: Unsupported CSW size %d", ap->csw_value & CSW_SIZE_MASK);
+ stlink_dap_record_error(ERROR_FAIL);
+ return ERROR_FAIL;
+ }
+
+ q->mem_ap.addr = (reg == MEM_AP_REG_DRW) ? ap->tar_value : ((ap->tar_value & ~0x0f) | (reg & 0x0c));
+ q->mem_ap.ap = ap;
+ q->mem_ap.data = data;
+ q->mem_ap.csw = ap->csw_default;
+
+ /* force TAR and CSW update */
+ ap->tar_valid = false;
+ ap->csw_value = 0;
+ } else {
+ q->cmd = CMD_AP_WRITE;
+ q->ap_w.reg = reg;
+ q->ap_w.ap = ap;
+ q->ap_w.data = data;
+ if (reg == MEM_AP_REG_CSW && ap->csw_default != last_csw_default[ap->ap_num]) {
+ q->ap_w.changes_csw_default = true;
+ last_csw_default[ap->ap_num] = ap->csw_default;
+ } else {
+ q->ap_w.changes_csw_default = false;
+ }
+ }
+
+ if (i == MAX_QUEUE_DEPTH - 1)
+ stlink_dap_run_internal(ap->dap);
+
+ return ERROR_OK;
+}
+
+static int stlink_swim_op_srst(void)
+{
+ return stlink_swim_generate_rst(stlink_dap_handle);
+}
+
+static int stlink_swim_op_read_mem(uint32_t addr, uint32_t size,
+ uint32_t count, uint8_t *buffer)
+{
+ int retval;
+ uint32_t bytes_remaining;
+
+ LOG_DEBUG_IO("read at 0x%08" PRIx32 " len %" PRIu32 "*0x%08" PRIx32, addr, size, count);
+ count *= size;
+
+ while (count) {
+ bytes_remaining = (count > STLINK_SWIM_DATA_SIZE) ? STLINK_SWIM_DATA_SIZE : count;
+ retval = stlink_swim_readbytes(stlink_dap_handle, addr, bytes_remaining, buffer);
+ if (retval != ERROR_OK)
+ return retval;
+
+ buffer += bytes_remaining;
+ addr += bytes_remaining;
+ count -= bytes_remaining;
+ }
+
+ return ERROR_OK;
+}
+
+static int stlink_swim_op_write_mem(uint32_t addr, uint32_t size,
+ uint32_t count, const uint8_t *buffer)
+{
+ int retval;
+ uint32_t bytes_remaining;
+
+ LOG_DEBUG_IO("write at 0x%08" PRIx32 " len %" PRIu32 "*0x%08" PRIx32, addr, size, count);
+ count *= size;
+
+ while (count) {
+ bytes_remaining = (count > STLINK_SWIM_DATA_SIZE) ? STLINK_SWIM_DATA_SIZE : count;
+ retval = stlink_swim_writebytes(stlink_dap_handle, addr, bytes_remaining, buffer);
+ if (retval != ERROR_OK)
+ return retval;
+
+ buffer += bytes_remaining;
+ addr += bytes_remaining;
+ count -= bytes_remaining;
+ }
+
+ return ERROR_OK;
+}
+
+static int stlink_swim_op_reconnect(void)
+{
+ int retval;
+
+ retval = stlink_usb_mode_enter(stlink_dap_handle, STLINK_MODE_DEBUG_SWIM);
+ if (retval != ERROR_OK)
+ return retval;
+
+ return stlink_swim_resync(stlink_dap_handle);
+}
+
+static int stlink_dap_config_trace(bool enabled,
+ enum tpiu_pin_protocol pin_protocol, uint32_t port_size,
+ unsigned int *trace_freq, unsigned int traceclkin_freq,
+ uint16_t *prescaler)
+{
+ return stlink_config_trace(stlink_dap_handle, enabled, pin_protocol,
+ port_size, trace_freq, traceclkin_freq,
+ prescaler);
+}
+
+static int stlink_dap_trace_read(uint8_t *buf, size_t *size)
+{
+ return stlink_usb_trace_read(stlink_dap_handle, buf, size);
+}
+
+/** */
+COMMAND_HANDLER(stlink_dap_vid_pid)
+{
+ unsigned int i, max_usb_ids = HLA_MAX_USB_IDS;
+
+ if (CMD_ARGC > max_usb_ids * 2) {
+ LOG_WARNING("ignoring extra IDs in vid_pid "
+ "(maximum is %d pairs)", max_usb_ids);
+ CMD_ARGC = max_usb_ids * 2;
+ }
+ if (CMD_ARGC < 2 || (CMD_ARGC & 1)) {
+ LOG_WARNING("incomplete vid_pid configuration directive");
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+ for (i = 0; i < CMD_ARGC; i += 2) {
+ COMMAND_PARSE_NUMBER(u16, CMD_ARGV[i], stlink_dap_param.vid[i / 2]);
+ COMMAND_PARSE_NUMBER(u16, CMD_ARGV[i + 1], stlink_dap_param.pid[i / 2]);
+ }
+
+ /* null termination */
+ stlink_dap_param.vid[i / 2] = stlink_dap_param.pid[i / 2] = 0;
+
+ return ERROR_OK;
+}
+
+/** */
+COMMAND_HANDLER(stlink_dap_backend_command)
+{
+ /* default values */
+ bool use_stlink_tcp = false;
+ uint16_t stlink_tcp_port = 7184;
+
+ if (CMD_ARGC == 0 || CMD_ARGC > 2)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ else if (strcmp(CMD_ARGV[0], "usb") == 0) {
+ if (CMD_ARGC > 1)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ /* else use_stlink_tcp = false (already the case ) */
+ } else if (strcmp(CMD_ARGV[0], "tcp") == 0) {
+ use_stlink_tcp = true;
+ if (CMD_ARGC == 2)
+ COMMAND_PARSE_NUMBER(u16, CMD_ARGV[1], stlink_tcp_port);
+ } else
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ stlink_dap_param.use_stlink_tcp = use_stlink_tcp;
+ stlink_dap_param.stlink_tcp_port = stlink_tcp_port;
+
+ return ERROR_OK;
+}
+
+#define BYTES_PER_LINE 16
+COMMAND_HANDLER(stlink_dap_cmd_command)
+{
+ unsigned int rx_n, tx_n;
+ struct stlink_usb_handle_s *h = stlink_dap_handle;
+
+ if (CMD_ARGC < 2)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], rx_n);
+ tx_n = CMD_ARGC - 1;
+ if (tx_n > STLINK_SG_SIZE || rx_n > STLINK_DATA_SIZE) {
+ LOG_ERROR("max %x byte sent and %d received", STLINK_SG_SIZE, STLINK_DATA_SIZE);
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ stlink_usb_init_buffer(h, h->rx_ep, rx_n);
+
+ for (unsigned int i = 0; i < tx_n; i++) {
+ uint8_t byte;
+ COMMAND_PARSE_NUMBER(u8, CMD_ARGV[i + 1], byte);
+ h->cmdbuf[h->cmdidx++] = byte;
+ }
+
+ int retval = stlink_usb_xfer_noerrcheck(h, h->databuf, rx_n);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("Error %d", retval);
+ return retval;
+ }
+
+ for (unsigned int i = 0; i < rx_n; i++)
+ command_print_sameline(CMD, "0x%02x%c", h->databuf[i],
+ ((i == (rx_n - 1)) || ((i % BYTES_PER_LINE) == (BYTES_PER_LINE - 1))) ? '\n' : ' ');
+
+ return ERROR_OK;
+}
+
+/** */
+static const struct command_registration stlink_dap_subcommand_handlers[] = {
+ {
+ .name = "vid_pid",
+ .handler = stlink_dap_vid_pid,
+ .mode = COMMAND_CONFIG,
+ .help = "USB VID and PID of the adapter",
+ .usage = "(vid pid)+",
+ },
+ {
+ .name = "backend",
+ .handler = &stlink_dap_backend_command,
+ .mode = COMMAND_CONFIG,
+ .help = "select which ST-Link backend to use",
+ .usage = "usb | tcp [port]",
+ },
+ {
+ .name = "cmd",
+ .handler = stlink_dap_cmd_command,
+ .mode = COMMAND_EXEC,
+ .help = "send arbitrary command",
+ .usage = "rx_n (tx_byte)+",
+ },
+ COMMAND_REGISTRATION_DONE
+};
+
+/** */
+static const struct command_registration stlink_dap_command_handlers[] = {
+ {
+ .name = "st-link",
+ .mode = COMMAND_ANY,
+ .help = "perform st-link management",
+ .chain = stlink_dap_subcommand_handlers,
+ .usage = "",
+ },
+ COMMAND_REGISTRATION_DONE
+};
+
+/** */
+static int stlink_dap_init(void)
+{
+ enum reset_types jtag_reset_config = jtag_get_reset_config();
+ enum stlink_mode mode;
+ int retval;
+
+ LOG_DEBUG("stlink_dap_init()");
+
+ if (jtag_reset_config & RESET_CNCT_UNDER_SRST) {
+ if (jtag_reset_config & RESET_SRST_NO_GATING)
+ stlink_dap_param.connect_under_reset = true;
+ else
+ LOG_WARNING("\'srst_nogate\' reset_config option is required");
+ }
+
+ if (transport_is_dapdirect_swd())
+ mode = STLINK_MODE_DEBUG_SWD;
+ else if (transport_is_dapdirect_jtag())
+ mode = STLINK_MODE_DEBUG_JTAG;
+ else if (transport_is_swim())
+ mode = STLINK_MODE_DEBUG_SWIM;
+ else {
+ LOG_ERROR("Unsupported transport");
+ return ERROR_FAIL;
+ }
+
+ retval = stlink_open(&stlink_dap_param, mode, (void **)&stlink_dap_handle);
+ if (retval != ERROR_OK)
+ return retval;
+
+ if ((mode != STLINK_MODE_DEBUG_SWIM) &&
+ !(stlink_dap_handle->version.flags & STLINK_F_HAS_DAP_REG)) {
+ LOG_ERROR("ST-Link version does not support DAP direct transport");
+ return ERROR_FAIL;
+ }
+ return ERROR_OK;
+}
+
+/** */
+static int stlink_dap_quit(void)
+{
+ LOG_DEBUG("stlink_dap_quit()");
+
+ return stlink_close(stlink_dap_handle);
+}
+
+/** */
+static int stlink_dap_reset(int req_trst, int req_srst)
+{
+ LOG_DEBUG("stlink_dap_reset(%d)", req_srst);
+ return stlink_usb_assert_srst(stlink_dap_handle,
+ req_srst ? STLINK_DEBUG_APIV2_DRIVE_NRST_LOW
+ : STLINK_DEBUG_APIV2_DRIVE_NRST_HIGH);
+}
+
+/** */
+static int stlink_dap_speed(int speed)
+{
+ if (speed == 0) {
+ LOG_ERROR("RTCK not supported. Set nonzero adapter_khz.");
+ return ERROR_JTAG_NOT_IMPLEMENTED;
+ }
+
+ stlink_dap_param.initial_interface_speed = speed;
+ stlink_speed(stlink_dap_handle, speed, false);
+ return ERROR_OK;
+}
+
+/** */
+static int stlink_dap_khz(int khz, int *jtag_speed)
+{
+ if (khz == 0) {
+ LOG_ERROR("RCLK not supported");
+ return ERROR_FAIL;
+ }
+
+ *jtag_speed = stlink_speed(stlink_dap_handle, khz, true);
+ return ERROR_OK;
+}
+
+/** */
+static int stlink_dap_speed_div(int speed, int *khz)
+{
+ *khz = speed;
+ return ERROR_OK;
+}
+
+static const struct dap_ops stlink_dap_ops = {
+ .connect = stlink_dap_op_connect,
+ .send_sequence = stlink_dap_op_send_sequence,
+ .queue_dp_read = stlink_dap_op_queue_dp_read,
+ .queue_dp_write = stlink_dap_op_queue_dp_write,
+ .queue_ap_read = stlink_dap_op_queue_ap_read,
+ .queue_ap_write = stlink_dap_op_queue_ap_write,
+ .queue_ap_abort = stlink_dap_op_queue_ap_abort,
+ .run = stlink_dap_op_queue_run,
+ .sync = NULL, /* optional */
+ .quit = stlink_dap_op_quit, /* optional */
+};
+
+static const struct swim_driver stlink_swim_ops = {
+ .srst = stlink_swim_op_srst,
+ .read_mem = stlink_swim_op_read_mem,
+ .write_mem = stlink_swim_op_write_mem,
+ .reconnect = stlink_swim_op_reconnect,
+};
+
+static const char *const stlink_dap_transport[] = { "dapdirect_swd", "dapdirect_jtag", "swim", NULL };
+
+struct adapter_driver stlink_dap_adapter_driver = {
+ .name = "st-link",
+ .transports = stlink_dap_transport,
+ .commands = stlink_dap_command_handlers,
+
+ .init = stlink_dap_init,
+ .quit = stlink_dap_quit,
+ .reset = stlink_dap_reset,
+ .speed = stlink_dap_speed,
+ .khz = stlink_dap_khz,
+ .speed_div = stlink_dap_speed_div,
+ .config_trace = stlink_dap_config_trace,
+ .poll_trace = stlink_dap_trace_read,
+
+ .dap_jtag_ops = &stlink_dap_ops,
+ .dap_swd_ops = &stlink_dap_ops,
+ .swim_ops = &stlink_swim_ops,
+};