#include <netinet/tcp.h>
#endif
+#include <string.h>
+
#define NO_TAP_SHIFT 0
#define TAP_SHIFT 1
int sockfd;
struct sockaddr_in serv_addr;
+/* One jtag_vpi "packet" as sent over a TCP channel. */
struct vpi_cmd {
- int cmd;
+ union {
+ uint32_t cmd;
+ unsigned char cmd_buf[4];
+ };
unsigned char buffer_out[XFERT_MAX_SIZE];
unsigned char buffer_in[XFERT_MAX_SIZE];
- int length;
- int nb_bits;
+ union {
+ uint32_t length;
+ unsigned char length_buf[4];
+ };
+ union {
+ uint32_t nb_bits;
+ unsigned char nb_bits_buf[4];
+ };
};
+static char *jtag_vpi_cmd_to_str(int cmd_num)
+{
+ switch (cmd_num) {
+ case CMD_RESET:
+ return "CMD_RESET";
+ case CMD_TMS_SEQ:
+ return "CMD_TMS_SEQ";
+ case CMD_SCAN_CHAIN:
+ return "CMD_SCAN_CHAIN";
+ case CMD_SCAN_CHAIN_FLIP_TMS:
+ return "CMD_SCAN_CHAIN_FLIP_TMS";
+ case CMD_STOP_SIMU:
+ return "CMD_STOP_SIMU";
+ default:
+ return "<unknown>";
+ }
+}
+
static int jtag_vpi_send_cmd(struct vpi_cmd *vpi)
{
- int retval = write_socket(sockfd, vpi, sizeof(struct vpi_cmd));
- if (retval <= 0)
- return ERROR_FAIL;
+ int retval;
+ /* Optional low-level JTAG debug */
+ if (LOG_LEVEL_IS(LOG_LVL_DEBUG_IO)) {
+ if (vpi->nb_bits > 0) {
+ /* command with a non-empty data payload */
+ char *char_buf = buf_to_str(vpi->buffer_out,
+ (vpi->nb_bits > DEBUG_JTAG_IOZ)
+ ? DEBUG_JTAG_IOZ
+ : vpi->nb_bits,
+ 16);
+ LOG_DEBUG_IO("sending JTAG VPI cmd: cmd=%s, "
+ "length=%" PRIu32 ", "
+ "nb_bits=%" PRIu32 ", "
+ "buf_out=0x%s%s",
+ jtag_vpi_cmd_to_str(vpi->cmd),
+ vpi->length,
+ vpi->nb_bits,
+ char_buf,
+ (vpi->nb_bits > DEBUG_JTAG_IOZ) ? "(...)" : "");
+ free(char_buf);
+ } else {
+ /* command without data payload */
+ LOG_DEBUG_IO("sending JTAG VPI cmd: cmd=%s, "
+ "length=%" PRIu32 ", "
+ "nb_bits=%" PRIu32,
+ jtag_vpi_cmd_to_str(vpi->cmd),
+ vpi->length,
+ vpi->nb_bits);
+ }
+ }
+
+ /* Use little endian when transmitting/receiving jtag_vpi cmds.
+ The choice of little endian goes against usual networking conventions
+ but is intentional to remain compatible with most older OpenOCD builds
+ (i.e. builds on little-endian platforms). */
+ h_u32_to_le(vpi->cmd_buf, vpi->cmd);
+ h_u32_to_le(vpi->length_buf, vpi->length);
+ h_u32_to_le(vpi->nb_bits_buf, vpi->nb_bits);
+
+retry_write:
+ retval = write_socket(sockfd, vpi, sizeof(struct vpi_cmd));
+
+ if (retval < 0) {
+ /* Account for the case when socket write is interrupted. */
+#ifdef _WIN32
+ int wsa_err = WSAGetLastError();
+ if (wsa_err == WSAEINTR)
+ goto retry_write;
+#else
+ if (errno == EINTR)
+ goto retry_write;
+#endif
+ /* Otherwise this is an error using the socket, most likely fatal
+ for the connection. B*/
+ log_socket_error("jtag_vpi xmit");
+ /* TODO: Clean way how adapter drivers can report fatal errors
+ to upper layers of OpenOCD and let it perform an orderly shutdown? */
+ exit(-1);
+ } else if (retval < (int)sizeof(struct vpi_cmd)) {
+ /* This means we could not send all data, which is most likely fatal
+ for the jtag_vpi connection (the underlying TCP connection likely not
+ usable anymore) */
+ LOG_ERROR("Could not send all data through jtag_vpi connection.");
+ exit(-1);
+ }
+
+ /* Otherwise the packet has been sent successfully. */
return ERROR_OK;
}
static int jtag_vpi_receive_cmd(struct vpi_cmd *vpi)
{
- int retval = read_socket(sockfd, vpi, sizeof(struct vpi_cmd));
- if (retval < (int)sizeof(struct vpi_cmd))
- return ERROR_FAIL;
+ unsigned bytes_buffered = 0;
+ while (bytes_buffered < sizeof(struct vpi_cmd)) {
+ int bytes_to_receive = sizeof(struct vpi_cmd) - bytes_buffered;
+ int retval = read_socket(sockfd, ((char *)vpi) + bytes_buffered, bytes_to_receive);
+ if (retval < 0) {
+#ifdef _WIN32
+ int wsa_err = WSAGetLastError();
+ if (wsa_err == WSAEINTR) {
+ /* socket read interrupted by WSACancelBlockingCall() */
+ continue;
+ }
+#else
+ if (errno == EINTR) {
+ /* socket read interrupted by a signal */
+ continue;
+ }
+#endif
+ /* Otherwise, this is an error when accessing the socket. */
+ log_socket_error("jtag_vpi recv");
+ exit(-1);
+ } else if (retval == 0) {
+ /* Connection closed by the other side */
+ LOG_ERROR("Connection prematurely closed by jtag_vpi server.");
+ exit(-1);
+ }
+ /* Otherwise, we have successfully received some data */
+ bytes_buffered += retval;
+ }
+
+ /* Use little endian when transmitting/receiving jtag_vpi cmds. */
+ vpi->cmd = le_to_h_u32(vpi->cmd_buf);
+ vpi->length = le_to_h_u32(vpi->length_buf);
+ vpi->nb_bits = le_to_h_u32(vpi->nb_bits_buf);
return ERROR_OK;
}
static int jtag_vpi_reset(int trst, int srst)
{
struct vpi_cmd vpi;
+ memset(&vpi, 0, sizeof(struct vpi_cmd));
vpi.cmd = CMD_RESET;
vpi.length = 0;
struct vpi_cmd vpi;
int nb_bytes;
+ memset(&vpi, 0, sizeof(struct vpi_cmd));
nb_bytes = DIV_ROUND_UP(nb_bits, 8);
vpi.cmd = CMD_TMS_SEQ;
struct vpi_cmd vpi;
int nb_bytes = DIV_ROUND_UP(nb_bits, 8);
+ memset(&vpi, 0, sizeof(struct vpi_cmd));
+
vpi.cmd = tap_shift ? CMD_SCAN_CHAIN_FLIP_TMS : CMD_SCAN_CHAIN;
if (bits)
if (retval != ERROR_OK)
return retval;
+ /* Optional low-level JTAG debug */
+ if (LOG_LEVEL_IS(LOG_LVL_DEBUG_IO)) {
+ char *char_buf = buf_to_str(vpi.buffer_in,
+ (nb_bits > DEBUG_JTAG_IOZ) ? DEBUG_JTAG_IOZ : nb_bits,
+ 16);
+ LOG_DEBUG_IO("recvd JTAG VPI data: nb_bits=%d, buf_in=0x%s%s",
+ nb_bits, char_buf, (nb_bits > DEBUG_JTAG_IOZ) ? "(...)" : "");
+ free(char_buf);
+ }
+
if (bits)
memcpy(bits, vpi.buffer_in, nb_bytes);
case JTAG_SCAN:
retval = jtag_vpi_scan(cmd->cmd.scan);
break;
+ default:
+ LOG_ERROR("BUG: unknown JTAG command type 0x%X",
+ cmd->type);
+ retval = ERROR_FAIL;
+ break;
}
}
static int jtag_vpi_quit(void)
{
free(server_address);
- return close(sockfd);
+ return close_socket(sockfd);
}
COMMAND_HANDLER(jtag_vpi_set_port)
.handler = &jtag_vpi_set_port,
.mode = COMMAND_CONFIG,
.help = "set the port of the VPI server",
- .usage = "description_string",
+ .usage = "tcp_port_num",
},
{
.name = "jtag_vpi_set_address",
.handler = &jtag_vpi_set_address,
.mode = COMMAND_CONFIG,
.help = "set the address of the VPI server",
- .usage = "description_string",
+ .usage = "ipv4_addr",
},
COMMAND_REGISTRATION_DONE
};
-struct jtag_interface jtag_vpi_interface = {
- .name = "jtag_vpi",
+static struct jtag_interface jtag_vpi_interface = {
.supported = DEBUG_CAP_TMS_SEQ,
- .commands = jtag_vpi_command_handlers,
+ .execute_queue = jtag_vpi_execute_queue,
+};
+
+struct adapter_driver jtag_vpi_adapter_driver = {
+ .name = "jtag_vpi",
.transports = jtag_only,
+ .commands = jtag_vpi_command_handlers,
.init = jtag_vpi_init,
.quit = jtag_vpi_quit,
- .execute_queue = jtag_vpi_execute_queue,
+
+ .jtag_ops = &jtag_vpi_interface,
};
projects / fw / openocd / blobdiff