+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
/***************************************************************************
* Copyright (C) 2013 by Paul Fertser, fercerpav@gmail.com *
* *
* Copyright (C) 2012 by Creative Product Design, marc @ cpdesign.com.au *
* Based on at91rm9200.c (c) Anders Larsen *
* and RPi GPIO examples by Gert van Loo & Dom *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program. If not, see <http://www.gnu.org/licenses/>. *
***************************************************************************/
#ifdef HAVE_CONFIG_H
#define GPIO_LEV (*(pio_base+13)) /* current level of the pin */
static int dev_mem_fd;
-static volatile uint32_t *pio_base;
+static volatile uint32_t *pio_base = MAP_FAILED;
+static volatile uint32_t *pads_base = MAP_FAILED;
static bb_value_t bcm2835gpio_read(void);
static int bcm2835gpio_write(int tck, int tms, int tdi);
static int swclk_gpio_mode;
static int swdio_gpio = -1;
static int swdio_gpio_mode;
+static int swdio_dir_gpio = -1;
+static int swdio_dir_gpio_mode;
/* Transition delay coefficients */
static int speed_coeff = 113714;
static int speed_offset = 28;
static unsigned int jtag_delay;
+static int is_gpio_valid(int gpio)
+{
+ return gpio >= 0 && gpio <= 31;
+}
+
static bb_value_t bcm2835gpio_read(void)
{
return (GPIO_LEV & 1<<tdo_gpio) ? BB_HIGH : BB_LOW;
uint32_t set = 0;
uint32_t clear = 0;
- if (trst_gpio > 0) {
+ if (is_gpio_valid(trst_gpio)) {
set |= !trst<<trst_gpio;
clear |= trst<<trst_gpio;
}
- if (srst_gpio > 0) {
+ if (is_gpio_valid(srst_gpio)) {
set |= !srst<<srst_gpio;
clear |= srst<<srst_gpio;
}
static void bcm2835_swdio_drive(bool is_output)
{
- if (is_output)
- OUT_GPIO(swdio_gpio);
- else
- INP_GPIO(swdio_gpio);
+ if (is_gpio_valid(swdio_dir_gpio)) {
+ if (is_output) {
+ GPIO_SET = 1 << swdio_dir_gpio;
+ OUT_GPIO(swdio_gpio);
+ } else {
+ INP_GPIO(swdio_gpio);
+ GPIO_CLR = 1 << swdio_dir_gpio;
+ }
+ } else {
+ if (is_output)
+ OUT_GPIO(swdio_gpio);
+ else
+ INP_GPIO(swdio_gpio);
+ }
}
static int bcm2835_swdio_read(void)
return ERROR_OK;
}
-static int is_gpio_valid(int gpio)
-{
- return gpio >= 0 && gpio <= 53;
-}
-
COMMAND_HANDLER(bcm2835gpio_handle_jtag_gpionums)
{
if (CMD_ARGC == 4) {
return ERROR_OK;
}
+COMMAND_HANDLER(bcm2835gpio_handle_swd_dir_gpionum_swdio)
+{
+ if (CMD_ARGC == 1)
+ COMMAND_PARSE_NUMBER(int, CMD_ARGV[0], swdio_dir_gpio);
+
+ command_print(CMD, "BCM2835 num: swdio_dir = %d", swdio_dir_gpio);
+ return ERROR_OK;
+}
+
COMMAND_HANDLER(bcm2835gpio_handle_speed_coeffs)
{
if (CMD_ARGC == 2) {
return ERROR_OK;
}
-static const struct command_registration bcm2835gpio_command_handlers[] = {
+static const struct command_registration bcm2835gpio_subcommand_handlers[] = {
{
- .name = "bcm2835gpio_jtag_nums",
+ .name = "jtag_nums",
.handler = &bcm2835gpio_handle_jtag_gpionums,
.mode = COMMAND_CONFIG,
.help = "gpio numbers for tck, tms, tdi, tdo. (in that order)",
.usage = "[tck tms tdi tdo]",
},
{
- .name = "bcm2835gpio_tck_num",
+ .name = "tck_num",
.handler = &bcm2835gpio_handle_jtag_gpionum_tck,
.mode = COMMAND_CONFIG,
.help = "gpio number for tck.",
.usage = "[tck]",
},
{
- .name = "bcm2835gpio_tms_num",
+ .name = "tms_num",
.handler = &bcm2835gpio_handle_jtag_gpionum_tms,
.mode = COMMAND_CONFIG,
.help = "gpio number for tms.",
.usage = "[tms]",
},
{
- .name = "bcm2835gpio_tdo_num",
+ .name = "tdo_num",
.handler = &bcm2835gpio_handle_jtag_gpionum_tdo,
.mode = COMMAND_CONFIG,
.help = "gpio number for tdo.",
.usage = "[tdo]",
},
{
- .name = "bcm2835gpio_tdi_num",
+ .name = "tdi_num",
.handler = &bcm2835gpio_handle_jtag_gpionum_tdi,
.mode = COMMAND_CONFIG,
.help = "gpio number for tdi.",
.usage = "[tdi]",
},
{
- .name = "bcm2835gpio_swd_nums",
+ .name = "swd_nums",
.handler = &bcm2835gpio_handle_swd_gpionums,
.mode = COMMAND_CONFIG,
.help = "gpio numbers for swclk, swdio. (in that order)",
.usage = "[swclk swdio]",
},
{
- .name = "bcm2835gpio_swclk_num",
+ .name = "swclk_num",
.handler = &bcm2835gpio_handle_swd_gpionum_swclk,
.mode = COMMAND_CONFIG,
.help = "gpio number for swclk.",
.usage = "[swclk]",
},
{
- .name = "bcm2835gpio_swdio_num",
+ .name = "swdio_num",
.handler = &bcm2835gpio_handle_swd_gpionum_swdio,
.mode = COMMAND_CONFIG,
.help = "gpio number for swdio.",
.usage = "[swdio]",
},
{
- .name = "bcm2835gpio_srst_num",
+ .name = "swdio_dir_num",
+ .handler = &bcm2835gpio_handle_swd_dir_gpionum_swdio,
+ .mode = COMMAND_CONFIG,
+ .help = "gpio number for swdio direction control pin (set=output mode, clear=input mode)",
+ .usage = "[swdio_dir]",
+ },
+ {
+ .name = "srst_num",
.handler = &bcm2835gpio_handle_jtag_gpionum_srst,
.mode = COMMAND_CONFIG,
.help = "gpio number for srst.",
.usage = "[srst]",
},
{
- .name = "bcm2835gpio_trst_num",
+ .name = "trst_num",
.handler = &bcm2835gpio_handle_jtag_gpionum_trst,
.mode = COMMAND_CONFIG,
.help = "gpio number for trst.",
.usage = "[trst]",
},
{
- .name = "bcm2835gpio_speed_coeffs",
+ .name = "speed_coeffs",
.handler = &bcm2835gpio_handle_speed_coeffs,
.mode = COMMAND_CONFIG,
.help = "SPEED_COEFF and SPEED_OFFSET for delay calculations.",
.usage = "[SPEED_COEFF SPEED_OFFSET]",
},
{
- .name = "bcm2835gpio_peripheral_base",
+ .name = "peripheral_base",
.handler = &bcm2835gpio_handle_peripheral_base,
.mode = COMMAND_CONFIG,
.help = "peripheral base to access GPIOs (RPi1 0x20000000, RPi2 0x3F000000).",
COMMAND_REGISTRATION_DONE
};
+static const struct command_registration bcm2835gpio_command_handlers[] = {
+ {
+ .name = "bcm2835gpio",
+ .mode = COMMAND_ANY,
+ .help = "perform bcm2835gpio management",
+ .chain = bcm2835gpio_subcommand_handlers,
+ .usage = "",
+ },
+ COMMAND_REGISTRATION_DONE
+};
+
static const char * const bcm2835_transports[] = { "jtag", "swd", NULL };
static struct jtag_interface bcm2835gpio_interface = {
return 1;
}
+static void bcm2835gpio_munmap(void)
+{
+ if (pio_base != MAP_FAILED) {
+ munmap((void *)pio_base, sysconf(_SC_PAGE_SIZE));
+ pio_base = MAP_FAILED;
+ }
+
+ if (pads_base != MAP_FAILED) {
+ munmap((void *)pads_base, sysconf(_SC_PAGE_SIZE));
+ pads_base = MAP_FAILED;
+ }
+}
+
static int bcm2835gpio_init(void)
{
bitbang_interface = &bcm2835gpio_bitbang;
dev_mem_fd = open("/dev/mem", O_RDWR | O_SYNC);
}
if (dev_mem_fd < 0) {
- perror("open");
+ LOG_ERROR("open: %s", strerror(errno));
return ERROR_JTAG_INIT_FAILED;
}
MAP_SHARED, dev_mem_fd, BCM2835_GPIO_BASE);
if (pio_base == MAP_FAILED) {
- perror("mmap");
+ LOG_ERROR("mmap: %s", strerror(errno));
close(dev_mem_fd);
return ERROR_JTAG_INIT_FAILED;
}
- static volatile uint32_t *pads_base;
pads_base = mmap(NULL, sysconf(_SC_PAGE_SIZE), PROT_READ | PROT_WRITE,
MAP_SHARED, dev_mem_fd, BCM2835_PADS_GPIO_0_27);
if (pads_base == MAP_FAILED) {
- perror("mmap");
+ LOG_ERROR("mmap: %s", strerror(errno));
+ bcm2835gpio_munmap();
close(dev_mem_fd);
return ERROR_JTAG_INIT_FAILED;
}
+ close(dev_mem_fd);
+
/* set 4mA drive strength, slew rate limited, hysteresis on */
pads_base[BCM2835_PADS_GPIO_0_27_OFFSET] = 0x5a000008 + 1;
OUT_GPIO(tck_gpio);
OUT_GPIO(tms_gpio);
- if (trst_gpio != -1) {
+ if (is_gpio_valid(trst_gpio)) {
trst_gpio_mode = MODE_GPIO(trst_gpio);
GPIO_SET = 1 << trst_gpio;
OUT_GPIO(trst_gpio);
}
if (transport_is_swd()) {
+ /* Make buffer an output before the GPIO connected to it */
+ if (is_gpio_valid(swdio_dir_gpio)) {
+ swdio_dir_gpio_mode = MODE_GPIO(swdio_dir_gpio);
+ GPIO_SET = 1 << swdio_dir_gpio;
+ OUT_GPIO(swdio_dir_gpio);
+ }
+
swclk_gpio_mode = MODE_GPIO(swclk_gpio);
swdio_gpio_mode = MODE_GPIO(swdio_gpio);
OUT_GPIO(swdio_gpio);
}
- if (srst_gpio != -1) {
+ if (is_gpio_valid(srst_gpio)) {
srst_gpio_mode = MODE_GPIO(srst_gpio);
GPIO_SET = 1 << srst_gpio;
OUT_GPIO(srst_gpio);
SET_MODE_GPIO(tdi_gpio, tdi_gpio_mode);
SET_MODE_GPIO(tck_gpio, tck_gpio_mode);
SET_MODE_GPIO(tms_gpio, tms_gpio_mode);
- if (trst_gpio != -1)
+ if (is_gpio_valid(trst_gpio))
SET_MODE_GPIO(trst_gpio, trst_gpio_mode);
}
SET_MODE_GPIO(swdio_gpio, swdio_gpio_mode);
}
- if (srst_gpio != -1)
+ if (is_gpio_valid(srst_gpio))
SET_MODE_GPIO(srst_gpio, srst_gpio_mode);
+ if (is_gpio_valid(swdio_dir_gpio))
+ SET_MODE_GPIO(swdio_dir_gpio, swdio_dir_gpio_mode);
+
+ bcm2835gpio_munmap();
+
return ERROR_OK;
}