-/* SPDX-License-Identifier: GPL-2.0-or-later */
+// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2005 by Dominic Rath <Dominic.Rath@gmx.de>
* Copyright (C) 2007-2010 Øyvind Harboe <oyvind.harboe@zylin.com>
CLOCK_MODE_RCLK
};
+#define DEFAULT_CLOCK_SPEED_KHZ 100U
+
/**
* Adapter configuration
*/
static struct {
bool adapter_initialized;
char *usb_location;
+ char *serial;
enum adapter_clk_mode clock_mode;
int speed_khz;
int rclk_fallback_speed_khz;
+ struct adapter_gpio_config gpios[ADAPTER_GPIO_IDX_NUM];
+ bool gpios_initialized; /* Initialization of GPIOs to their unset values performed at run time */
} adapter_config;
+static const struct gpio_map {
+ const char *name;
+ enum adapter_gpio_direction direction;
+ bool permit_drive_option;
+ bool permit_init_state_option;
+} gpio_map[ADAPTER_GPIO_IDX_NUM] = {
+ [ADAPTER_GPIO_IDX_TDO] = { "tdo", ADAPTER_GPIO_DIRECTION_INPUT, false, true, },
+ [ADAPTER_GPIO_IDX_TDI] = { "tdi", ADAPTER_GPIO_DIRECTION_OUTPUT, true, true, },
+ [ADAPTER_GPIO_IDX_TMS] = { "tms", ADAPTER_GPIO_DIRECTION_OUTPUT, true, true, },
+ [ADAPTER_GPIO_IDX_TCK] = { "tck", ADAPTER_GPIO_DIRECTION_OUTPUT, true, true, },
+ [ADAPTER_GPIO_IDX_SWDIO] = { "swdio", ADAPTER_GPIO_DIRECTION_BIDIRECTIONAL, true, true, },
+ [ADAPTER_GPIO_IDX_SWDIO_DIR] = { "swdio_dir", ADAPTER_GPIO_DIRECTION_OUTPUT, true, false, },
+ [ADAPTER_GPIO_IDX_SWCLK] = { "swclk", ADAPTER_GPIO_DIRECTION_OUTPUT, true, true, },
+ [ADAPTER_GPIO_IDX_TRST] = { "trst", ADAPTER_GPIO_DIRECTION_OUTPUT, false, true, },
+ [ADAPTER_GPIO_IDX_SRST] = { "srst", ADAPTER_GPIO_DIRECTION_OUTPUT, false, true, },
+ [ADAPTER_GPIO_IDX_LED] = { "led", ADAPTER_GPIO_DIRECTION_OUTPUT, true, true, },
+};
+
bool is_adapter_initialized(void)
{
return adapter_config.adapter_initialized;
}
+/* For convenience of the bit-banging drivers keep the gpio_config drive
+ * settings for srst and trst in sync with values set by the "adapter
+ * reset_config" command.
+ */
+static void sync_adapter_reset_with_gpios(void)
+{
+ enum reset_types cfg = jtag_get_reset_config();
+ if (cfg & RESET_SRST_PUSH_PULL)
+ adapter_config.gpios[ADAPTER_GPIO_IDX_SRST].drive = ADAPTER_GPIO_DRIVE_MODE_PUSH_PULL;
+ else
+ adapter_config.gpios[ADAPTER_GPIO_IDX_SRST].drive = ADAPTER_GPIO_DRIVE_MODE_OPEN_DRAIN;
+ if (cfg & RESET_TRST_OPEN_DRAIN)
+ adapter_config.gpios[ADAPTER_GPIO_IDX_TRST].drive = ADAPTER_GPIO_DRIVE_MODE_OPEN_DRAIN;
+ else
+ adapter_config.gpios[ADAPTER_GPIO_IDX_TRST].drive = ADAPTER_GPIO_DRIVE_MODE_PUSH_PULL;
+}
+
+static void adapter_driver_gpios_init(void)
+{
+ if (adapter_config.gpios_initialized)
+ return;
+
+ for (int i = 0; i < ADAPTER_GPIO_IDX_NUM; ++i) {
+ adapter_config.gpios[i].gpio_num = -1;
+ adapter_config.gpios[i].chip_num = -1;
+ if (gpio_map[i].direction == ADAPTER_GPIO_DIRECTION_INPUT)
+ adapter_config.gpios[i].init_state = ADAPTER_GPIO_INIT_STATE_INPUT;
+ }
+
+ /* Drivers assume active low, and this is the normal behaviour for reset
+ * lines so should be the default. */
+ adapter_config.gpios[ADAPTER_GPIO_IDX_SRST].active_low = true;
+ adapter_config.gpios[ADAPTER_GPIO_IDX_TRST].active_low = true;
+ sync_adapter_reset_with_gpios();
+
+ /* JTAG GPIOs should be inactive except for tms */
+ adapter_config.gpios[ADAPTER_GPIO_IDX_TMS].init_state = ADAPTER_GPIO_INIT_STATE_ACTIVE;
+
+ adapter_config.gpios_initialized = true;
+}
+
/**
* Do low-level setup like initializing registers, output signals,
* and clocking.
return ERROR_JTAG_INVALID_INTERFACE;
}
+ adapter_driver_gpios_init();
+
int retval;
+
+ if (adapter_config.clock_mode == CLOCK_MODE_UNSELECTED) {
+ LOG_WARNING("An adapter speed is not selected in the init scripts."
+ " OpenOCD will try to run the adapter at the low speed (%d kHz)",
+ DEFAULT_CLOCK_SPEED_KHZ);
+ LOG_WARNING("To remove this warnings and achieve reasonable communication speed with the target,"
+ " set \"adapter speed\" or \"jtag_rclk\" in the init scripts.");
+ retval = adapter_config_khz(DEFAULT_CLOCK_SPEED_KHZ);
+ if (retval != ERROR_OK)
+ return ERROR_JTAG_INIT_FAILED;
+ }
+
retval = adapter_driver->init();
if (retval != ERROR_OK)
return retval;
return ERROR_OK;
}
- if (adapter_config.clock_mode == CLOCK_MODE_UNSELECTED) {
- LOG_ERROR("An adapter speed is not selected in the init script."
- " Insert a call to \"adapter speed\" or \"jtag_rclk\" to proceed.");
- return ERROR_JTAG_INIT_FAILED;
- }
-
int requested_khz = adapter_get_speed_khz();
int actual_khz = requested_khz;
int speed_var = 0;
LOG_ERROR("failed: %d", result);
}
+ free(adapter_config.serial);
+ free(adapter_config.usb_location);
+
struct jtag_tap *t = jtag_all_taps();
while (t) {
struct jtag_tap *n = t->next_tap;
return adapter_driver->speed_div(speed_var, khz);
}
+const char *adapter_get_required_serial(void)
+{
+ return adapter_config.serial;
+}
+
/*
* 1 char: bus
* 2 * 7 chars: max 7 ports
continue;
if (adapter_drivers[i]->commands) {
- retval = register_commands(CMD_CTX, NULL,
- adapter_drivers[i]->commands);
+ retval = register_commands(CMD_CTX, NULL, adapter_drivers[i]->commands);
if (retval != ERROR_OK)
return retval;
}
old_cfg &= ~mask;
new_cfg |= old_cfg;
jtag_set_reset_config(new_cfg);
+ sync_adapter_reset_with_gpios();
+
} else
new_cfg = jtag_get_reset_config();
return retval;
}
+COMMAND_HANDLER(handle_adapter_serial_command)
+{
+ if (CMD_ARGC != 1)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ free(adapter_config.serial);
+ adapter_config.serial = strdup(CMD_ARGV[0]);
+ return ERROR_OK;
+}
+
COMMAND_HANDLER(handle_adapter_reset_de_assert)
{
enum values {
(srst == VALUE_DEASSERT) ? SRST_DEASSERT : SRST_ASSERT);
}
+static int get_gpio_index(const char *signal_name)
+{
+ for (int i = 0; i < ADAPTER_GPIO_IDX_NUM; ++i) {
+ if (strcmp(gpio_map[i].name, signal_name) == 0)
+ return i;
+ }
+ return -1;
+}
+
+static COMMAND_HELPER(helper_adapter_gpio_print_config, enum adapter_gpio_config_index gpio_idx)
+{
+ struct adapter_gpio_config *gpio_config = &adapter_config.gpios[gpio_idx];
+ const char *active_state = gpio_config->active_low ? "low" : "high";
+ const char *dir = "";
+ const char *drive = "";
+ const char *pull = "";
+ const char *init_state = "";
+
+ switch (gpio_map[gpio_idx].direction) {
+ case ADAPTER_GPIO_DIRECTION_INPUT:
+ dir = "input";
+ break;
+ case ADAPTER_GPIO_DIRECTION_OUTPUT:
+ dir = "output";
+ break;
+ case ADAPTER_GPIO_DIRECTION_BIDIRECTIONAL:
+ dir = "bidirectional";
+ break;
+ }
+
+ if (gpio_map[gpio_idx].permit_drive_option) {
+ switch (gpio_config->drive) {
+ case ADAPTER_GPIO_DRIVE_MODE_PUSH_PULL:
+ drive = ", push-pull";
+ break;
+ case ADAPTER_GPIO_DRIVE_MODE_OPEN_DRAIN:
+ drive = ", open-drain";
+ break;
+ case ADAPTER_GPIO_DRIVE_MODE_OPEN_SOURCE:
+ drive = ", open-source";
+ break;
+ }
+ }
+
+ switch (gpio_config->pull) {
+ case ADAPTER_GPIO_PULL_NONE:
+ pull = ", pull-none";
+ break;
+ case ADAPTER_GPIO_PULL_UP:
+ pull = ", pull-up";
+ break;
+ case ADAPTER_GPIO_PULL_DOWN:
+ pull = ", pull-down";
+ break;
+ }
+
+ if (gpio_map[gpio_idx].permit_init_state_option) {
+ switch (gpio_config->init_state) {
+ case ADAPTER_GPIO_INIT_STATE_INACTIVE:
+ init_state = ", init-state inactive";
+ break;
+ case ADAPTER_GPIO_INIT_STATE_ACTIVE:
+ init_state = ", init-state active";
+ break;
+ case ADAPTER_GPIO_INIT_STATE_INPUT:
+ init_state = ", init-state input";
+ break;
+ }
+ }
+
+ command_print(CMD, "adapter gpio %s (%s): num %d, chip %d, active-%s%s%s%s",
+ gpio_map[gpio_idx].name, dir, gpio_config->gpio_num, gpio_config->chip_num, active_state,
+ drive, pull, init_state);
+
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(helper_adapter_gpio_print_all_configs)
+{
+ for (int i = 0; i < ADAPTER_GPIO_IDX_NUM; ++i)
+ CALL_COMMAND_HANDLER(helper_adapter_gpio_print_config, i);
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(adapter_gpio_config_handler)
+{
+ unsigned int i = 1;
+ struct adapter_gpio_config *gpio_config;
+
+ adapter_driver_gpios_init();
+
+ if (CMD_ARGC == 0) {
+ CALL_COMMAND_HANDLER(helper_adapter_gpio_print_all_configs);
+ return ERROR_OK;
+ }
+
+ int gpio_idx = get_gpio_index(CMD_ARGV[0]);
+ if (gpio_idx == -1) {
+ LOG_ERROR("adapter has no gpio named %s", CMD_ARGV[0]);
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ if (CMD_ARGC == 1) {
+ CALL_COMMAND_HANDLER(helper_adapter_gpio_print_config, gpio_idx);
+ return ERROR_OK;
+ }
+
+ gpio_config = &adapter_config.gpios[gpio_idx];
+ while (i < CMD_ARGC) {
+ LOG_DEBUG("Processing %s", CMD_ARGV[i]);
+
+ if (isdigit(*CMD_ARGV[i])) {
+ int gpio_num; /* Use a meaningful output parameter for more helpful error messages */
+ COMMAND_PARSE_NUMBER(int, CMD_ARGV[i], gpio_num);
+ gpio_config->gpio_num = gpio_num;
+ ++i;
+ continue;
+ }
+
+ if (strcmp(CMD_ARGV[i], "-chip") == 0) {
+ if (CMD_ARGC - i < 2) {
+ LOG_ERROR("-chip option requires a parameter");
+ return ERROR_FAIL;
+ }
+ LOG_DEBUG("-chip arg is %s", CMD_ARGV[i + 1]);
+ int chip_num; /* Use a meaningful output parameter for more helpful error messages */
+ COMMAND_PARSE_NUMBER(int, CMD_ARGV[i + 1], chip_num);
+ gpio_config->chip_num = chip_num;
+ i += 2;
+ continue;
+ }
+
+ if (strcmp(CMD_ARGV[i], "-active-high") == 0) {
+ ++i;
+ gpio_config->active_low = false;
+ continue;
+ }
+ if (strcmp(CMD_ARGV[i], "-active-low") == 0) {
+ ++i;
+ gpio_config->active_low = true;
+ continue;
+ }
+
+ if (gpio_map[gpio_idx].permit_drive_option) {
+ if (strcmp(CMD_ARGV[i], "-push-pull") == 0) {
+ ++i;
+ gpio_config->drive = ADAPTER_GPIO_DRIVE_MODE_PUSH_PULL;
+ continue;
+ }
+ if (strcmp(CMD_ARGV[i], "-open-drain") == 0) {
+ ++i;
+ gpio_config->drive = ADAPTER_GPIO_DRIVE_MODE_OPEN_DRAIN;
+ continue;
+ }
+ if (strcmp(CMD_ARGV[i], "-open-source") == 0) {
+ ++i;
+ gpio_config->drive = ADAPTER_GPIO_DRIVE_MODE_OPEN_SOURCE;
+ continue;
+ }
+ }
+
+ if (strcmp(CMD_ARGV[i], "-pull-none") == 0) {
+ ++i;
+ gpio_config->pull = ADAPTER_GPIO_PULL_NONE;
+ continue;
+ }
+ if (strcmp(CMD_ARGV[i], "-pull-up") == 0) {
+ ++i;
+ gpio_config->pull = ADAPTER_GPIO_PULL_UP;
+ continue;
+ }
+ if (strcmp(CMD_ARGV[i], "-pull-down") == 0) {
+ ++i;
+ gpio_config->pull = ADAPTER_GPIO_PULL_DOWN;
+ continue;
+ }
+
+ if (gpio_map[gpio_idx].permit_init_state_option) {
+ if (strcmp(CMD_ARGV[i], "-init-inactive") == 0) {
+ ++i;
+ gpio_config->init_state = ADAPTER_GPIO_INIT_STATE_INACTIVE;
+ continue;
+ }
+ if (strcmp(CMD_ARGV[i], "-init-active") == 0) {
+ ++i;
+ gpio_config->init_state = ADAPTER_GPIO_INIT_STATE_ACTIVE;
+ continue;
+ }
+
+ if (gpio_map[gpio_idx].direction == ADAPTER_GPIO_DIRECTION_BIDIRECTIONAL &&
+ strcmp(CMD_ARGV[i], "-init-input") == 0) {
+ ++i;
+ gpio_config->init_state = ADAPTER_GPIO_INIT_STATE_INPUT;
+ continue;
+ }
+ }
+
+ LOG_ERROR("illegal option for adapter %s %s: %s",
+ CMD_NAME, gpio_map[gpio_idx].name, CMD_ARGV[i]);
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ /* Force swdio_dir init state to be compatible with swdio init state */
+ if (gpio_idx == ADAPTER_GPIO_IDX_SWDIO)
+ adapter_config.gpios[ADAPTER_GPIO_IDX_SWDIO_DIR].init_state =
+ (gpio_config->init_state == ADAPTER_GPIO_INIT_STATE_INPUT) ?
+ ADAPTER_GPIO_INIT_STATE_INACTIVE :
+ ADAPTER_GPIO_INIT_STATE_ACTIVE;
+
+ return ERROR_OK;
+}
+
#ifdef HAVE_LIBUSB_GET_PORT_NUMBERS
COMMAND_HANDLER(handle_usb_location_command)
{
"With or without argument, display current setting.",
.usage = "[khz]",
},
+ {
+ .name = "serial",
+ .handler = handle_adapter_serial_command,
+ .mode = COMMAND_CONFIG,
+ .help = "Set the serial number of the adapter",
+ .usage = "serial_string",
+ },
{
.name = "list",
.handler = handle_adapter_list_command,
.help = "Controls SRST and TRST lines.",
.usage = "|assert [srst|trst [deassert|assert srst|trst]]",
},
+ {
+ .name = "gpio",
+ .handler = adapter_gpio_config_handler,
+ .mode = COMMAND_CONFIG,
+ .help = "gpio adapter command group",
+ .usage = "[ tdo|tdi|tms|tck|trst|swdio|swdio_dir|swclk|srst|led"
+ "[gpio_number] "
+ "[-chip chip_number] "
+ "[-active-high|-active-low] "
+ "[-push-pull|-open-drain|-open-source] "
+ "[-pull-none|-pull-up|-pull-down]"
+ "[-init-inactive|-init-active|-init-input] ]",
+ },
COMMAND_REGISTRATION_DONE
};
* @todo Remove internal assumptions that all debug adapters use JTAG for
* transport. Various types and data structures are not named generically.
*/
-int interface_register_commands(struct command_context *ctx)
+int adapter_register_commands(struct command_context *ctx)
{
return register_commands(ctx, NULL, interface_command_handlers);
}
+
+const char *adapter_gpio_get_name(enum adapter_gpio_config_index idx)
+{
+ return gpio_map[idx].name;
+}
+
+/* Allow drivers access to the GPIO configuration */
+const struct adapter_gpio_config *adapter_gpio_get_config(void)
+{
+ return adapter_config.gpios;
+}
projects / fw / openocd / blobdiff