move nand drivers to src/flash/nand/
[fw/openocd] / src / flash / s3c2440_nand.c
diff --git a/src/flash/s3c2440_nand.c b/src/flash/s3c2440_nand.c
deleted file mode 100644 (file)
index 556f6f1..0000000
+++ /dev/null
@@ -1,171 +0,0 @@
-/***************************************************************************
- *   Copyright (C) 2007, 2008 by Ben Dooks                                 *
- *   ben@fluff.org                                                         *
- *                                                                         *
- *   This program is free software; you can redistribute it and/or modify  *
- *   it under the terms of the GNU General Public License as published by  *
- *   the Free Software Foundation; either version 2 of the License, or     *
- *   (at your option) any later version.                                   *
- *                                                                         *
- *   This program is distributed in the hope that it will be useful,       *
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- *   GNU General Public License for more details.                          *
- *                                                                         *
- *   You should have received a copy of the GNU General Public License     *
- *   along with this program; if not, write to the                         *
- *   Free Software Foundation, Inc.,                                       *
- *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
- ***************************************************************************/
-
-/*
- * S3C2440 OpenOCD NAND Flash controller support.
- *
- * Many thanks to Simtec Electronics for sponsoring this work.
- */
-
-#ifdef HAVE_CONFIG_H
-#include "config.h"
-#endif
-
-#include "s3c24xx_nand.h"
-
-
-NAND_DEVICE_COMMAND_HANDLER(s3c2440_nand_device_command)
-{
-       struct s3c24xx_nand_controller *info;
-       CALL_S3C24XX_DEVICE_COMMAND(nand, &info);
-
-       /* fill in the address fields for the core device */
-       info->cmd = S3C2440_NFCMD;
-       info->addr = S3C2440_NFADDR;
-       info->data = S3C2440_NFDATA;
-       info->nfstat = S3C2440_NFSTAT;
-
-       return ERROR_OK;
-}
-
-static int s3c2440_init(struct nand_device *nand)
-{
-       struct s3c24xx_nand_controller *s3c24xx_info = nand->controller_priv;
-       struct target *target = s3c24xx_info->target;
-
-       target_write_u32(target, S3C2410_NFCONF,
-                        S3C2440_NFCONF_TACLS(3) |
-                        S3C2440_NFCONF_TWRPH0(7) |
-                        S3C2440_NFCONF_TWRPH1(7));
-
-       target_write_u32(target, S3C2440_NFCONT,
-                        S3C2440_NFCONT_INITECC | S3C2440_NFCONT_ENABLE);
-
-       return ERROR_OK;
-}
-
-int s3c2440_nand_ready(struct nand_device *nand, int timeout)
-{
-       struct s3c24xx_nand_controller *s3c24xx_info = nand->controller_priv;
-       struct target *target = s3c24xx_info->target;
-       uint8_t status;
-
-       if (target->state != TARGET_HALTED) {
-               LOG_ERROR("target must be halted to use S3C24XX NAND flash controller");
-               return ERROR_NAND_OPERATION_FAILED;
-       }
-
-       do {
-               target_read_u8(target, s3c24xx_info->nfstat, &status);
-
-               if (status & S3C2440_NFSTAT_READY)
-                       return 1;
-
-               alive_sleep(1);
-       } while (timeout-- > 0);
-
-
-       return 0;
-}
-
-/* use the fact we can read/write 4 bytes in one go via a single 32bit op */
-
-int s3c2440_read_block_data(struct nand_device *nand, uint8_t *data, int data_size)
-{
-       struct s3c24xx_nand_controller *s3c24xx_info = nand->controller_priv;
-       struct target *target = s3c24xx_info->target;
-       uint32_t nfdata = s3c24xx_info->data;
-       uint32_t tmp;
-
-       LOG_INFO("%s: reading data: %p, %p, %d\n", __func__, nand, data, data_size);
-
-       if (target->state != TARGET_HALTED) {
-               LOG_ERROR("target must be halted to use S3C24XX NAND flash controller");
-               return ERROR_NAND_OPERATION_FAILED;
-       }
-
-       while (data_size >= 4) {
-               target_read_u32(target, nfdata, &tmp);
-
-               data[0] = tmp;
-               data[1] = tmp >> 8;
-               data[2] = tmp >> 16;
-               data[3] = tmp >> 24;
-
-               data_size -= 4;
-               data += 4;
-       }
-
-       while (data_size > 0) {
-               target_read_u8(target, nfdata, data);
-
-               data_size -= 1;
-               data += 1;
-       }
-
-       return ERROR_OK;
-}
-
-int s3c2440_write_block_data(struct nand_device *nand, uint8_t *data, int data_size)
-{
-       struct s3c24xx_nand_controller *s3c24xx_info = nand->controller_priv;
-       struct target *target = s3c24xx_info->target;
-       uint32_t nfdata = s3c24xx_info->data;
-       uint32_t tmp;
-
-       if (target->state != TARGET_HALTED) {
-               LOG_ERROR("target must be halted to use S3C24XX NAND flash controller");
-               return ERROR_NAND_OPERATION_FAILED;
-       }
-
-       while (data_size >= 4) {
-               tmp = le_to_h_u32(data);
-               target_write_u32(target, nfdata, tmp);
-
-               data_size -= 4;
-               data += 4;
-       }
-
-       while (data_size > 0) {
-               target_write_u8(target, nfdata, *data);
-
-               data_size -= 1;
-               data += 1;
-       }
-
-       return ERROR_OK;
-}
-
-struct nand_flash_controller s3c2440_nand_controller = {
-               .name = "s3c2440",
-               .nand_device_command = &s3c2440_nand_device_command,
-               .init = &s3c2440_init,
-               .reset = &s3c24xx_reset,
-               .command = &s3c24xx_command,
-               .address = &s3c24xx_address,
-               .write_data = &s3c24xx_write_data,
-               .read_data = &s3c24xx_read_data,
-               .write_page = s3c24xx_write_page,
-               .read_page = s3c24xx_read_page,
-               .write_block_data = &s3c2440_write_block_data,
-               .read_block_data = &s3c2440_read_block_data,
-               .controller_ready = &s3c24xx_controller_ready,
-               .nand_ready = &s3c2440_nand_ready,
-       };