* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* *
+* You should have received a copy of the GNU General Public License *
+* along with this program. If not, see <http://www.gnu.org/licenses/>. *
***************************************************************************/
#ifdef HAVE_CONFIG_H
/* Flash controller configuration values */
#define FLASH_ID_XMC4500 0xA2
-#define FLASH_ID_XMC4700_4800 0x92
+#define FLASH_ID_XMC4300_XMC4700_4800 0x92
#define FLASH_ID_XMC4100_4200 0x9C
#define FLASH_ID_XMC4400 0x9F
}
/* This part doesn't follow the typical standard of 0xff
- * being the default padding value.*/
- bank->default_padded_value = 0x00;
+ * being the erased value.*/
+ bank->default_padded_value = bank->erased_value = 0x00;
return ERROR_OK;
}
bank->num_sectors = 12;
LOG_DEBUG("XMC4xxx: XMC4500 detected.");
break;
- case FLASH_ID_XMC4700_4800:
+ case FLASH_ID_XMC4300_XMC4700_4800:
bank->num_sectors = 16;
LOG_DEBUG("XMC4xxx: XMC4700/4800 detected.");
break;
return res;
}
-/* The logical erase value of an xmc4xxx memory cell is 0x00,
- * therefore, we cannot use the built in flash blank check and must
- * implement our own */
-
-/** Checks whether a memory region is zeroed. */
-int xmc4xxx_blank_check_memory(struct target *target,
- uint32_t address, uint32_t count, uint32_t *blank)
-{
- struct working_area *erase_check_algorithm;
- struct reg_param reg_params[3];
- struct armv7m_algorithm armv7m_info;
- int retval;
-
- static const uint8_t erase_check_code[] = {
-#include "../../../contrib/loaders/erase_check/armv7m_0_erase_check.inc"
- };
-
- /* make sure we have a working area */
- if (target_alloc_working_area(target, sizeof(erase_check_code),
- &erase_check_algorithm) != ERROR_OK)
- return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
-
- retval = target_write_buffer(target, erase_check_algorithm->address,
- sizeof(erase_check_code), (uint8_t *)erase_check_code);
- if (retval != ERROR_OK)
- return retval;
-
- armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
- armv7m_info.core_mode = ARM_MODE_THREAD;
-
- init_reg_param(®_params[0], "r0", 32, PARAM_OUT);
- buf_set_u32(reg_params[0].value, 0, 32, address);
-
- init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
- buf_set_u32(reg_params[1].value, 0, 32, count);
-
- init_reg_param(®_params[2], "r2", 32, PARAM_IN_OUT);
- buf_set_u32(reg_params[2].value, 0, 32, 0x00);
-
- retval = target_run_algorithm(target,
- 0,
- NULL,
- 3,
- reg_params,
- erase_check_algorithm->address,
- erase_check_algorithm->address + (sizeof(erase_check_code) - 2),
- 10000,
- &armv7m_info);
-
- if (retval == ERROR_OK)
- *blank = buf_get_u32(reg_params[2].value, 0, 32);
-
- destroy_reg_param(®_params[0]);
- destroy_reg_param(®_params[1]);
- destroy_reg_param(®_params[2]);
-
- target_free_working_area(target, erase_check_algorithm);
-
- return retval;
-}
-
-static int xmc4xxx_flash_blank_check(struct flash_bank *bank)
-{
- struct target *target = bank->target;
- int i;
- int retval;
- uint32_t blank;
-
- if (bank->target->state != TARGET_HALTED) {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
-
- for (i = 0; i < bank->num_sectors; i++) {
- uint32_t address = bank->base + bank->sectors[i].offset;
- uint32_t size = bank->sectors[i].size;
-
- LOG_DEBUG("Erase checking 0x%08"PRIx32, address);
- retval = xmc4xxx_blank_check_memory(target, address, size, &blank);
-
- if (retval != ERROR_OK)
- break;
-
- if (blank == 0x00)
- bank->sectors[i].is_erased = 1;
- else
- bank->sectors[i].is_erased = 0;
- }
-
- return ERROR_OK;
-}
-
static int xmc4xxx_write_page(struct flash_bank *bank, const uint8_t *pg_buf,
uint32_t offset, bool user_config)
{
memcpy(&tmp_buf[start_pad], buffer, remaining);
if (end_pad) {
- LOG_INFO("Padding end of page @%08"PRIx32" by %d bytes",
+ LOG_INFO("Padding end of page @" TARGET_ADDR_FMT " by %d bytes",
bank->base + offset, end_pad);
memset(&tmp_buf[256 - end_pad], 0xff, end_pad);
}
break;
}
break;
+ case 0x300:
+ dev_str = "XMC4300";
+
+ switch (rev_id) {
+ case 0x1:
+ rev_str = "AA";
+ }
+ break;
case 0x400:
dev_str = "XMC4400";
/* If OTP Write protection is enabled (User 2), list each
* sector that has it enabled */
- char otp_str[8];
+ char otp_str[14];
if (otp_enabled) {
strcat(prot_str, "\nOTP Protection is enabled for sectors:\n");
for (int i = 0; i < bank->num_sectors; i++) {
if (fb->write_prot_otp[i]) {
snprintf(otp_str, sizeof(otp_str), "- %d\n", i);
- strncat(prot_str, otp_str, ARRAY_SIZE(otp_str));
+ strncat(prot_str, otp_str, sizeof(prot_str) - strlen(prot_str) - 1);
}
}
}
uint32_t addr;
int res;
- if ((level < 0) || (level > 1)) {
- LOG_ERROR("Invalid user level. Must be 0-1");
- return ERROR_FAIL;
- }
-
switch (level) {
case 0:
addr = UCB0_BASE;
case 1:
addr = UCB1_BASE;
break;
+ default:
+ LOG_ERROR("Invalid user level. Must be 0-1");
+ return ERROR_FAIL;
}
res = xmc4xxx_erase_sector(bank, addr, true);
COMMAND_REGISTRATION_DONE
};
-struct flash_driver xmc4xxx_flash = {
+const struct flash_driver xmc4xxx_flash = {
.name = "xmc4xxx",
.commands = xmc4xxx_command_handlers,
.flash_bank_command = xmc4xxx_flash_bank_command,
.read = default_flash_read,
.probe = xmc4xxx_probe,
.auto_probe = xmc4xxx_probe,
- .erase_check = xmc4xxx_flash_blank_check,
+ .erase_check = default_flash_blank_check,
.info = xmc4xxx_get_info_command,
.protect_check = xmc4xxx_protect_check,
.protect = xmc4xxx_protect,
+ .free_driver_priv = default_flash_free_driver_priv,
};
projects / fw / openocd / blobdiff